Job Responsibilities: Work closely and communicate proactively with Scrum Masters and Project Managers to plan project activities - daily, per sprint, as well as quarterly Provide resource and effort estimates to Resource Managers and Scrum Masters Work closely with a scrum of network engineers and supervise their work in order to ensure their deliverables follow Sky's best practices Call-out risks, exceptions or deviations from standard processes (technical or project related) and present them to senior management Contribute in the design stage by providing valuable input and insights to Network Designers Contribute and provide insights to Fulfilment Engineers in writing MOPs and signing them off Contribute and provide insights to Test Engineers in writing test plans and signing them off Act as a point of escalation during project related issues or outages Act as an end-to-end solution owner across the different teams and functions, from kick-off to hand-over Qualifications: Bachelor's degree in a technical field such as computer science, computer engineering or related field required MSc degree IIS a plus 10-15 years experience required in the networking field 5 years experience required as a senior in the networking field, preferably in a solutions design role Previous work experience required in the telecommunications sector, preferably in a solutions design role Strong understanding about networking technologies, like routing, switching, security/Firewalling, load-balancing, and QoS Experience working on Nokia 7750 service Routers, Cisco IOS XR, and NXOS Experience with Fortinet Firewalls and F5 load-balancers is a plus Experience working in Agile SAFe framework, or ability to prove so Good project planning and management skills Good leadership and supervision skills Good communication and collaboration skills Minimum CCNP level or equivalent from other vendors, preferable CCIE level or equivalent from other vendors
29/04/2024
Project-based
Job Responsibilities: Work closely and communicate proactively with Scrum Masters and Project Managers to plan project activities - daily, per sprint, as well as quarterly Provide resource and effort estimates to Resource Managers and Scrum Masters Work closely with a scrum of network engineers and supervise their work in order to ensure their deliverables follow Sky's best practices Call-out risks, exceptions or deviations from standard processes (technical or project related) and present them to senior management Contribute in the design stage by providing valuable input and insights to Network Designers Contribute and provide insights to Fulfilment Engineers in writing MOPs and signing them off Contribute and provide insights to Test Engineers in writing test plans and signing them off Act as a point of escalation during project related issues or outages Act as an end-to-end solution owner across the different teams and functions, from kick-off to hand-over Qualifications: Bachelor's degree in a technical field such as computer science, computer engineering or related field required MSc degree IIS a plus 10-15 years experience required in the networking field 5 years experience required as a senior in the networking field, preferably in a solutions design role Previous work experience required in the telecommunications sector, preferably in a solutions design role Strong understanding about networking technologies, like routing, switching, security/Firewalling, load-balancing, and QoS Experience working on Nokia 7750 service Routers, Cisco IOS XR, and NXOS Experience with Fortinet Firewalls and F5 load-balancers is a plus Experience working in Agile SAFe framework, or ability to prove so Good project planning and management skills Good leadership and supervision skills Good communication and collaboration skills Minimum CCNP level or equivalent from other vendors, preferable CCIE level or equivalent from other vendors
Lead Front End Developer (JavaScript, TypeScript, React) - New ML/AI Platform Join a dynamic Data organization in Sheffield seeking a skilled Lead Front End Developer (JavaScript, TypeScript, React) to spearhead the development of their cutting-edge AI/ML Data platform. As the Lead Developer, you'll play a pivotal role in crafting and expanding modern web applications. Your responsibilities will encompass shaping the technical vision and strategy for web app development. Leading and motivating a team of software engineers will be central, offering technical mentorship and nurturing a culture of continual advancement. This is a hybrid role, with a requirement for 2 days per week onsite in Sheffield. Requirements: Proficiency in JavaScript, TypeScript, and React for developing intricate web applications Strong grasp of software engineering principles and expertise across the entire SDLC Proven experience in leading software engineering teams Familiarity with small team dynamics or startup environments Passion for collaborating closely with Artificial Intelligence and Machine Learning technologies With the organisation poised for rapid expansion, this is an exciting opportunity to grow alongside them. If you're ready to embark on this journey, apply now for further details and a confidential discussion.
29/04/2024
Full time
Lead Front End Developer (JavaScript, TypeScript, React) - New ML/AI Platform Join a dynamic Data organization in Sheffield seeking a skilled Lead Front End Developer (JavaScript, TypeScript, React) to spearhead the development of their cutting-edge AI/ML Data platform. As the Lead Developer, you'll play a pivotal role in crafting and expanding modern web applications. Your responsibilities will encompass shaping the technical vision and strategy for web app development. Leading and motivating a team of software engineers will be central, offering technical mentorship and nurturing a culture of continual advancement. This is a hybrid role, with a requirement for 2 days per week onsite in Sheffield. Requirements: Proficiency in JavaScript, TypeScript, and React for developing intricate web applications Strong grasp of software engineering principles and expertise across the entire SDLC Proven experience in leading software engineering teams Familiarity with small team dynamics or startup environments Passion for collaborating closely with Artificial Intelligence and Machine Learning technologies With the organisation poised for rapid expansion, this is an exciting opportunity to grow alongside them. If you're ready to embark on this journey, apply now for further details and a confidential discussion.
Azure Platform Engineer - Paas, Azure SQL, WebApps, Powershell, Ansible Requirements: - Expert level cloud infrastructure experience incl. server, storage, networking, and applications, and PaaS products such as Azure SQL, WebApps, AppServices, Private Links, and container orchestration tools. - Experience and proven track record of building, managing, and migrating solutions in a private - Responsible for innovative design and implementation of cloud infrastructure and platforms. - Financial or commodities background. Skills: GitHub Terraform PowerShell Bash ELK Ansible Octopus Deploy Docker Hybrid working, client London based. Please reply ASAP with CV if interested. Scope AT acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C s, Privacy Policy and Disclaimers which can be found on our website.
29/04/2024
Full time
Azure Platform Engineer - Paas, Azure SQL, WebApps, Powershell, Ansible Requirements: - Expert level cloud infrastructure experience incl. server, storage, networking, and applications, and PaaS products such as Azure SQL, WebApps, AppServices, Private Links, and container orchestration tools. - Experience and proven track record of building, managing, and migrating solutions in a private - Responsible for innovative design and implementation of cloud infrastructure and platforms. - Financial or commodities background. Skills: GitHub Terraform PowerShell Bash ELK Ansible Octopus Deploy Docker Hybrid working, client London based. Please reply ASAP with CV if interested. Scope AT acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C s, Privacy Policy and Disclaimers which can be found on our website.
Do you have extensive Leadership and Mentoring experience as C#, ASP.NET and MVC developer, and are you seeking a new hybrid job in London? Our client is looking for a Lead C# Developer, and the hybrid role comes with a salary of up to £110,000 p/a and excellent benefits. As a Lead C# Developer, you will work on various web applications using the latest technologies and best practices. This is a hybrid role based in London (Central) 2-3 times per week with occasional travel to their offices in Kent. In your first few weeks in this Lead C# Developer role, you can expect to: Design and develop web applications using C#, ASP.NET MVC, Entity Framework, LINQ, and other related technologies Collaborate with other developers, testers, and stakeholders to ensure the delivery of reliable, secure, and scalable solutions Write clean, maintainable, and testable code using SOLID principles and design patterns Develop and optimise queries in SQL Server Perform code reviews, unit testing, and integration testing using tools like XUnit, MSTest and Moq To apply for this Lead C# Developer role, you will need a degree in Computer Science, Engineering, or similar and/or equivalent experience. You will also require the following: Must have a proven background as a Team Lead/Lead developer, with direct reports and mentoring experience with at least 3 years experience at this level. At least 8-10 years of experience in web development working at a Senior level using C#, ASP.NET MVC, and SQL Server Must have an extensive background working within Fintech or within Financial Services organisations. Proficiency in Razor, HTML, CSS, JavaScript, jQuery, Bootstrap, and other Front End technologies Familiar with RESTful APIs, JSON, XML, and web services If you want to impact and create change positively, you'll be rewarded with an excellent salary of up to £110,000 p/a and a benefits package for your inclusive and committed approach. We'd love you to apply for this Full time hybrid Lead C# Developer job, and we're waiting to hear from you. Please contact Deerfoot IT Recruitment today. Deerfoot IT Resources Ltd is one of the UK's leading IT Recruitment Agencies, trusted by many of the UK's leading employers. Established in 1997, we have over 25 years of experience as IT Recruitment Specialists. We will never send your CV anywhere without your authorisation and only after you have seen the complete details of this opportunity. Deerfoot is acting as an employment agency for permanent hires and an employment business for contingency hires. Each time Deerfoot sends a CV to a recruiting client, we donate £1 to The Born Free Foundation (). Deerfoot is also climate-positive in partnership with Ecologi. Deerfoot IT Resources Ltd is acting as an Employment Agency in relation to this vacancy.
29/04/2024
Full time
Do you have extensive Leadership and Mentoring experience as C#, ASP.NET and MVC developer, and are you seeking a new hybrid job in London? Our client is looking for a Lead C# Developer, and the hybrid role comes with a salary of up to £110,000 p/a and excellent benefits. As a Lead C# Developer, you will work on various web applications using the latest technologies and best practices. This is a hybrid role based in London (Central) 2-3 times per week with occasional travel to their offices in Kent. In your first few weeks in this Lead C# Developer role, you can expect to: Design and develop web applications using C#, ASP.NET MVC, Entity Framework, LINQ, and other related technologies Collaborate with other developers, testers, and stakeholders to ensure the delivery of reliable, secure, and scalable solutions Write clean, maintainable, and testable code using SOLID principles and design patterns Develop and optimise queries in SQL Server Perform code reviews, unit testing, and integration testing using tools like XUnit, MSTest and Moq To apply for this Lead C# Developer role, you will need a degree in Computer Science, Engineering, or similar and/or equivalent experience. You will also require the following: Must have a proven background as a Team Lead/Lead developer, with direct reports and mentoring experience with at least 3 years experience at this level. At least 8-10 years of experience in web development working at a Senior level using C#, ASP.NET MVC, and SQL Server Must have an extensive background working within Fintech or within Financial Services organisations. Proficiency in Razor, HTML, CSS, JavaScript, jQuery, Bootstrap, and other Front End technologies Familiar with RESTful APIs, JSON, XML, and web services If you want to impact and create change positively, you'll be rewarded with an excellent salary of up to £110,000 p/a and a benefits package for your inclusive and committed approach. We'd love you to apply for this Full time hybrid Lead C# Developer job, and we're waiting to hear from you. Please contact Deerfoot IT Recruitment today. Deerfoot IT Resources Ltd is one of the UK's leading IT Recruitment Agencies, trusted by many of the UK's leading employers. Established in 1997, we have over 25 years of experience as IT Recruitment Specialists. We will never send your CV anywhere without your authorisation and only after you have seen the complete details of this opportunity. Deerfoot is acting as an employment agency for permanent hires and an employment business for contingency hires. Each time Deerfoot sends a CV to a recruiting client, we donate £1 to The Born Free Foundation (). Deerfoot is also climate-positive in partnership with Ecologi. Deerfoot IT Resources Ltd is acting as an Employment Agency in relation to this vacancy.
IT Support Engineer - 2nd/3rd Line, O365, AD, Azure, Infrastructure, Network, EUC, cloud - London - Perm - £40k My client - within Professional services - are seeking an IT Support Engineer to join their team. This is a new role where you will be supporting and installing client's infrastructure, network and working on new Infrastructure projects. Duties include: Resolving technical issues passed from service desk Attend client sites to support and install new infrastructure Windows server support Supporting VMware/Hyper V Supporting Azure Administration of key IT functions, including but not limited to, AD, GPO's, DHCP, DNS and AV. Being a key member of the team in the planning and execution of IT projects. Firewall administration and overall client network security with the Network Security Specialists. Providing network support - installing and configuring Switches, Routers etc Being the point of escalation for user support requests delivered via our service desk ticketing. Documenting processes and procedures and helping to review and enhance existing documentation. Deploying patches on hardware/software/networks/environments as well as supporting the architecture and integration of technical solutions. Looking for candidates with similar experience with the following: Proven 2nd and 3rd line infrastructure support Windows 10, macOS and Office 365 suite support exp Microsoft Azure exp Microsoft Office 365 platforms (SharePoint, Exchange, AAD). Microsoft Hyper V and or VMware - ideally Windows Server 2008 R2, 2012 R2, 2016, 2019. VPN technologies. Network components, network operating systems and computer hardware components. Network troubleshooting- Basic and/or advanced connectivity testing and Firewall knowledge. Hands on knowledge of the procedures used in the installation, modification maintenance and repair of IT hardware and software. Domain controllers, Active Directory Management, DHCP, DNS, Replication. WDS and other deployment tools. Microsoft Intune or other MDM tools. SIP/IP phone systems. Performing daily system checks, Servers, backups, and Firewall monitoring. Demonstrable documentation skills (reports, policies, procedures, workflows). Ideally ITIL Certified CCNA - Ideally The company offer excellent benefits, training and career progression IT Support Engineer - 2nd/3rd Line, O365, AD, Azure, Infrastructure, Network, EUC, cloud - London - Perm - £40k
29/04/2024
Full time
IT Support Engineer - 2nd/3rd Line, O365, AD, Azure, Infrastructure, Network, EUC, cloud - London - Perm - £40k My client - within Professional services - are seeking an IT Support Engineer to join their team. This is a new role where you will be supporting and installing client's infrastructure, network and working on new Infrastructure projects. Duties include: Resolving technical issues passed from service desk Attend client sites to support and install new infrastructure Windows server support Supporting VMware/Hyper V Supporting Azure Administration of key IT functions, including but not limited to, AD, GPO's, DHCP, DNS and AV. Being a key member of the team in the planning and execution of IT projects. Firewall administration and overall client network security with the Network Security Specialists. Providing network support - installing and configuring Switches, Routers etc Being the point of escalation for user support requests delivered via our service desk ticketing. Documenting processes and procedures and helping to review and enhance existing documentation. Deploying patches on hardware/software/networks/environments as well as supporting the architecture and integration of technical solutions. Looking for candidates with similar experience with the following: Proven 2nd and 3rd line infrastructure support Windows 10, macOS and Office 365 suite support exp Microsoft Azure exp Microsoft Office 365 platforms (SharePoint, Exchange, AAD). Microsoft Hyper V and or VMware - ideally Windows Server 2008 R2, 2012 R2, 2016, 2019. VPN technologies. Network components, network operating systems and computer hardware components. Network troubleshooting- Basic and/or advanced connectivity testing and Firewall knowledge. Hands on knowledge of the procedures used in the installation, modification maintenance and repair of IT hardware and software. Domain controllers, Active Directory Management, DHCP, DNS, Replication. WDS and other deployment tools. Microsoft Intune or other MDM tools. SIP/IP phone systems. Performing daily system checks, Servers, backups, and Firewall monitoring. Demonstrable documentation skills (reports, policies, procedures, workflows). Ideally ITIL Certified CCNA - Ideally The company offer excellent benefits, training and career progression IT Support Engineer - 2nd/3rd Line, O365, AD, Azure, Infrastructure, Network, EUC, cloud - London - Perm - £40k
I have recently partnered with a SaaS Fintech company looking for a Junior .NET Engineer to join their trading team. Before I elaborate, here is their compensation package; salary up to £40,000, 25 days holiday, performance-based bonus up to 10%, work from home budget of £500, 7% pension, hybrid 1 day a week. My client has a series of Financial based products from B2C and B2B banking, pensions, and trading. They are currently undergoing a digital transformation of their traditional banking applications and in the process of migrating to a modern .NET stack. Tech Stack: Commercial experience with modern .NET version. They use React on their Front End, a willingness to learn or experience with highly advantageous. SQL Microservices Docker/Kubernetes. Azure. The team are happy to develop someone in this position, so if there are parts of the stack you are unfamiliar with, we still encourage you to apply. If this role isn't for you, don't hesitate to contact me and we can have a more detailed conversation about what you are looking for.
29/04/2024
Full time
I have recently partnered with a SaaS Fintech company looking for a Junior .NET Engineer to join their trading team. Before I elaborate, here is their compensation package; salary up to £40,000, 25 days holiday, performance-based bonus up to 10%, work from home budget of £500, 7% pension, hybrid 1 day a week. My client has a series of Financial based products from B2C and B2B banking, pensions, and trading. They are currently undergoing a digital transformation of their traditional banking applications and in the process of migrating to a modern .NET stack. Tech Stack: Commercial experience with modern .NET version. They use React on their Front End, a willingness to learn or experience with highly advantageous. SQL Microservices Docker/Kubernetes. Azure. The team are happy to develop someone in this position, so if there are parts of the stack you are unfamiliar with, we still encourage you to apply. If this role isn't for you, don't hesitate to contact me and we can have a more detailed conversation about what you are looking for.
CNC MILLER SETTER OPERATOR REPORTING TO: PRODUCTION MANAGER Due to my client's continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Miller Setter Operator to support Production. My client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, my client can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. At my client, we believe that good customer service is every bit as important as a strong product. DUTIES AND RESPONSIBILITIES INCLUDE: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Setting and operating milling machines to required tolerance Use of manual measuring equipment Tool setting on CNC Machines Programme proving of new products as and when required. Actively provide details of changes to correct/improve programs that go towards improving machining performance Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Use of Fanuc controls Tapping and Deburring where required Help and assist other members of the milling cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the [COMPANY] Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required THE IDEAL CANDIDATE MUST HAVE/SKILLS REQUIRED: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player EXPERIENCE IN THE FOLLOWING AREAS WILL BE REQUIRED: 3-5 Years relevant production experience Experience of Milling Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs DESIRABLE: Experience of a high-quality Manufacturing environment Have previously run Matsuura 3-4-5 axis milling machines or similar Minor Fanuc programme editing Excellent communication skills Good time management
29/04/2024
Full time
CNC MILLER SETTER OPERATOR REPORTING TO: PRODUCTION MANAGER Due to my client's continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Miller Setter Operator to support Production. My client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, my client can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. At my client, we believe that good customer service is every bit as important as a strong product. DUTIES AND RESPONSIBILITIES INCLUDE: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Setting and operating milling machines to required tolerance Use of manual measuring equipment Tool setting on CNC Machines Programme proving of new products as and when required. Actively provide details of changes to correct/improve programs that go towards improving machining performance Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Use of Fanuc controls Tapping and Deburring where required Help and assist other members of the milling cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the [COMPANY] Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required THE IDEAL CANDIDATE MUST HAVE/SKILLS REQUIRED: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player EXPERIENCE IN THE FOLLOWING AREAS WILL BE REQUIRED: 3-5 Years relevant production experience Experience of Milling Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs DESIRABLE: Experience of a high-quality Manufacturing environment Have previously run Matsuura 3-4-5 axis milling machines or similar Minor Fanuc programme editing Excellent communication skills Good time management
Job description Coating Technician, Full-Time on-site in Leicestershire. Up to 29K Plus Shift Allowance (Shift Pattern: 06.00 - 14.00/14.00 - 22.00 - Monday - Friday). Possible weekend requirement. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Mission: To assist the coating department by using optical technological knowledge to help with production requirements to meet on-time-delivery requirements Yield expectations. To stay competitive within the current market and to assist in new product development.To make recommendations for continuous process improvements and may instigate relevant development activity. Key Responsibilities Ability to measure and assess work on the appropriate spectrophotometers. Ability to identify potential coating problems in process and take appropriate corrective action. Ability to identify coating defects such as spatter, striae, delamination, lint marks, comet marks etc. and understand the possible causes and know the type of action to take to avoid their occurrence. Possesses a thorough understanding of relevant Surface Quality Specifications and how the above relates to them. Examine work prior to coating and be satisfied it is fit to coat. Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. Capable of stripping optics safely, observing Local Health and Safety rules. Identify potential problems with the coating plant/measuring equipment and alert the appropriate support staff. Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002. Competent to train colleagues on various aspects of the coating department. Education, Skills Abilities : Qualifications in Mathematics and Physics at least to GCSE or A level Computer literacy, including familiarity with Excel and Word The ability to analyse situations and results A good understanding of optical manufacture A good engineering background SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
29/04/2024
Full time
Job description Coating Technician, Full-Time on-site in Leicestershire. Up to 29K Plus Shift Allowance (Shift Pattern: 06.00 - 14.00/14.00 - 22.00 - Monday - Friday). Possible weekend requirement. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Mission: To assist the coating department by using optical technological knowledge to help with production requirements to meet on-time-delivery requirements Yield expectations. To stay competitive within the current market and to assist in new product development.To make recommendations for continuous process improvements and may instigate relevant development activity. Key Responsibilities Ability to measure and assess work on the appropriate spectrophotometers. Ability to identify potential coating problems in process and take appropriate corrective action. Ability to identify coating defects such as spatter, striae, delamination, lint marks, comet marks etc. and understand the possible causes and know the type of action to take to avoid their occurrence. Possesses a thorough understanding of relevant Surface Quality Specifications and how the above relates to them. Examine work prior to coating and be satisfied it is fit to coat. Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. Capable of stripping optics safely, observing Local Health and Safety rules. Identify potential problems with the coating plant/measuring equipment and alert the appropriate support staff. Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002. Competent to train colleagues on various aspects of the coating department. Education, Skills Abilities : Qualifications in Mathematics and Physics at least to GCSE or A level Computer literacy, including familiarity with Excel and Word The ability to analyse situations and results A good understanding of optical manufacture A good engineering background SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
Job Title: CNC Grinder Setter Operator Department: Production Reporting to: Production Supervisor Due to their continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Grinder Setter Operator to support Production. Our client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, they can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. We believe that good customer service is every bit as important as a strong product. Duties and responsibilities include: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Use of manual measuring equipment Produce programmes on the machine as and when new products arrive Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Machines include: Jones & Shipman 1300X, Studer S40, Studer S145, Jones & Shipman Techmaster 634 surface grinder Actively provide details of changes to correct/improve production of parts towards improving machining performance Help and assist other members of the grinding cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required The ideal candidate must have/skills required: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player Experience in the following areas will be required: 3-5 Years relevant production experience Experience of Grinding Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs Desirable: Experience of a high-quality Manufacturing environment Writing & editing CNC Grinding programs. Excellent communication skills Good time management
29/04/2024
Full time
Job Title: CNC Grinder Setter Operator Department: Production Reporting to: Production Supervisor Due to their continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Grinder Setter Operator to support Production. Our client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, they can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. We believe that good customer service is every bit as important as a strong product. Duties and responsibilities include: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Use of manual measuring equipment Produce programmes on the machine as and when new products arrive Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Machines include: Jones & Shipman 1300X, Studer S40, Studer S145, Jones & Shipman Techmaster 634 surface grinder Actively provide details of changes to correct/improve production of parts towards improving machining performance Help and assist other members of the grinding cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required The ideal candidate must have/skills required: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player Experience in the following areas will be required: 3-5 Years relevant production experience Experience of Grinding Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs Desirable: Experience of a high-quality Manufacturing environment Writing & editing CNC Grinding programs. Excellent communication skills Good time management
Wealth Management Business Analyst Consultant (m/f/d) with Languages English, German (nice to have) Westhouse is one of the leading international recruitment agencies for the procurement of highly qualified experts in fields such as IT life cycle management, SAP, engineering, commerce and specialist consultancy. For our client we are currently looking for a Wealth Management Business Analyst Consultant (m/f/d) General information Reference: 168184 Location: GA Zurich (3 days onsite/2 days remote in CH) Start: 02.05.2024 Volume: Full time Duration: 31.12.2024 (plus extension) Languages: English, German (nice to have) Your Skills - Previous experience as a Management Consultant with technical expertise. - Minimum 5 years of experience working as a Business Analyst/Analyst. - Minimum 5 years of experience working as a Project Manager. - Practical and applied knowledge of the asset management industry and key applications. - Strong domain knowledge of funds and mandate capabilities. - Proven experience in leading integration projects. - Demonstrated analytical capabilities with a focus on process improvement. - Excellent communication skills, both written and verbal, with the ability to effectively present complex information. Your Tasks - Provide strategic guidance and consulting services to clients in the wealth management industry. - Analyze client requirements and develop innovative solutions to meet their needs. - Lead integration projects, ensuring seamless implementation of new systems and processes. - Utilize practical knowledge of asset management industry and key applications, with a focus on clients and products. - Demonstrate domain expertise in funds and mandate capabilities. - Collaborate with cross-functional teams to drive process improvements and optimize business operations. - Conduct in-depth analysis of business processes and systems, identifying areas for improvement and optimization. - Develop and deliver presentations to communicate findings, recommendations, and project updates to stakeholders. - Serve as a subject matter expert, providing guidance and support to junior team members. Interested? We look forward to receiving your application documents in electronic form.
29/04/2024
Project-based
Wealth Management Business Analyst Consultant (m/f/d) with Languages English, German (nice to have) Westhouse is one of the leading international recruitment agencies for the procurement of highly qualified experts in fields such as IT life cycle management, SAP, engineering, commerce and specialist consultancy. For our client we are currently looking for a Wealth Management Business Analyst Consultant (m/f/d) General information Reference: 168184 Location: GA Zurich (3 days onsite/2 days remote in CH) Start: 02.05.2024 Volume: Full time Duration: 31.12.2024 (plus extension) Languages: English, German (nice to have) Your Skills - Previous experience as a Management Consultant with technical expertise. - Minimum 5 years of experience working as a Business Analyst/Analyst. - Minimum 5 years of experience working as a Project Manager. - Practical and applied knowledge of the asset management industry and key applications. - Strong domain knowledge of funds and mandate capabilities. - Proven experience in leading integration projects. - Demonstrated analytical capabilities with a focus on process improvement. - Excellent communication skills, both written and verbal, with the ability to effectively present complex information. Your Tasks - Provide strategic guidance and consulting services to clients in the wealth management industry. - Analyze client requirements and develop innovative solutions to meet their needs. - Lead integration projects, ensuring seamless implementation of new systems and processes. - Utilize practical knowledge of asset management industry and key applications, with a focus on clients and products. - Demonstrate domain expertise in funds and mandate capabilities. - Collaborate with cross-functional teams to drive process improvements and optimize business operations. - Conduct in-depth analysis of business processes and systems, identifying areas for improvement and optimization. - Develop and deliver presentations to communicate findings, recommendations, and project updates to stakeholders. - Serve as a subject matter expert, providing guidance and support to junior team members. Interested? We look forward to receiving your application documents in electronic form.
The Armament supervisor is responsible to the Armament lead and should be an experienced and skilled technician undertaking a range of detailed maintenance activities on aircraft equipment and/or aircraft components. The post holder should have an excellent understanding of the construct of the approved Technical Information set and is competent to supervise personnel who are working on maintenance instructions and in accordance with the organisation's Regulatory Framework and should be able to demonstrate a distinct ability to analyse and diagnose faults to equipment & assemblies, follow diagnostic procedures and work effectively within a team providing guidance to less experienced team members in a diverse and dynamic operational environment. Responsible for maintaining airworthiness through appropriate task delegation and authorisation on an aircraft or aircraft component. Responsible for meeting agreed delivery targets at a tactical level. Demonstrates people management and leadership skills Demonstrates awareness of broader external dependencies and identifies areas for continuous improvement. In addition the Post Holder shall hold certain privileges delegated from the Maintenance Manager. RequirementsCore Activities: Undertake detailed maintenance, inspection and supervision activities of aircraft components. Assuring work carried out has been completed in accordance with the SOW/Work package using the relevant approved technical information. Resolving faults and maintenance issues, including an awareness of configuration management. Undertake and complete tasked maintenance & diagnostic activities on weapons systems/components which will include, as appropriate, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test. Will be responsible for the operational output of each Component MRO Workshop under their control in line with agreed customer requirements. Post holder will also have responsibilities for the cost and schedule adherence of the component maintenance activities. Supervise team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider programme. Responsible for meeting agreed delivery targets in the short to medium term through the supervision of others. Progress reporting against delivery targets to management. Undertake support tasks within the component maintenance facility which are required to maintain compliance with the MOE and AMC procedures (eg oversight checks, control of tooling/test equipment etc.) Undertake fault evaluation and raise ad hoc work cards and for found faults' during maintenance. Ability to scope and carry out independent and vital inspections. Maintain personal & teams task authorisation for working on components in accordance with AMC requirements. Required to provide support and guidance, including allocation of tasks to appropriately authorised maintenance technicians. Provide effective leadership and supervision to team members under your direct supervision. Key Activities: Performance indicators - Ensure the effective management of Part 145 activities by setting delivery targets, monitoring progress and developing performance improvement programmes. Prioritises activities within/across teams to maximise efficiency. Represents the Maintenance Manager at management reviews, where necessary. Responsible for the assessment of escalated issues for any impact on Continuing Airworthiness and generating effective resolution, or sponsoring escalation to management, as appropriate. Completion of activities - Ensure all Part 145 activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Ensure all Part 145 activities are performed by suitably qualified, experienced and authorised personnel. Ensure the integration of Part 145 activity within the business, including the engagement of key stakeholders at all stages of the process. Provide support and guidance to the team(s). Procedure/standards - Manage the Part 145 team(s) compliance with the Part 145 Exposition, its associated procedures and standards, and any other Company procedures and standards, as applicable. Identify, propose and implement change as required, whilst ensuring compliance. Safety Management System - Promote the application of Human Factors, Error Management, Risk Management and Safety Assurance within the Part 145 team(s), together with the proactive analysis, mitigation and management of Hazards. Management System Assurance - Ensure Part 145 team(s) activities are compliant with the AM&S Governance and Assurance framework. Ensure Process Confirmations and independent assurance audits are supported by Part 145 personnel and integrated within/across teams. Manage the response to audit findings in a timely and appropriate manner and provide information into the relevant reviews. Generate and implement effective improvements within/across teams to overcome any non-compliance and monitor effectiveness. Statutory/Regulatory & Legislative requirements - Able to demonstrate a good understanding and application of the relevant Continuing Airworthiness Regulatory framework, and ensure any Regulatory-driven changes are implemented within the Part 145 team(s) activities. Ensure compliance with all other requirements, eg ITAR, EaPW, ISO, etc. Contractual Requirements - Ensure compliance with all applicable contractual requirements, eg through support to contract reviews, and ensure any changes are implemented into the Part 145 activities, as appropriate. Requirements: Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship/qualifications. Academic qualification for this role is a minimum of City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Experienced and competent leader at this level. Typically 2+ years' experience including type, classed as fully competent with all required 'Authorities' in place. Demonstrating breadth of experience, currency & recency via a Log Book (electronic or paper) capturing skills, knowledge and authorities for working on Aircraft type or in bays. Practical experience and expertise in the application of aviation safety standards and safe operating practices. A comprehensive knowledge of the Acceptable Means of Compliance. Management training. Leadership- Foundation. Human Factors- Standard Course Specification. E&PW Awareness- Standard Course Specification. ITAR Awareness- Standard Course Specification. Benefits Competitive Basic Salary 25 Days Annual Leave Annual Bonus On site Parking Pension Scheme Life Assurance
29/04/2024
Full time
The Armament supervisor is responsible to the Armament lead and should be an experienced and skilled technician undertaking a range of detailed maintenance activities on aircraft equipment and/or aircraft components. The post holder should have an excellent understanding of the construct of the approved Technical Information set and is competent to supervise personnel who are working on maintenance instructions and in accordance with the organisation's Regulatory Framework and should be able to demonstrate a distinct ability to analyse and diagnose faults to equipment & assemblies, follow diagnostic procedures and work effectively within a team providing guidance to less experienced team members in a diverse and dynamic operational environment. Responsible for maintaining airworthiness through appropriate task delegation and authorisation on an aircraft or aircraft component. Responsible for meeting agreed delivery targets at a tactical level. Demonstrates people management and leadership skills Demonstrates awareness of broader external dependencies and identifies areas for continuous improvement. In addition the Post Holder shall hold certain privileges delegated from the Maintenance Manager. RequirementsCore Activities: Undertake detailed maintenance, inspection and supervision activities of aircraft components. Assuring work carried out has been completed in accordance with the SOW/Work package using the relevant approved technical information. Resolving faults and maintenance issues, including an awareness of configuration management. Undertake and complete tasked maintenance & diagnostic activities on weapons systems/components which will include, as appropriate, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test. Will be responsible for the operational output of each Component MRO Workshop under their control in line with agreed customer requirements. Post holder will also have responsibilities for the cost and schedule adherence of the component maintenance activities. Supervise team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider programme. Responsible for meeting agreed delivery targets in the short to medium term through the supervision of others. Progress reporting against delivery targets to management. Undertake support tasks within the component maintenance facility which are required to maintain compliance with the MOE and AMC procedures (eg oversight checks, control of tooling/test equipment etc.) Undertake fault evaluation and raise ad hoc work cards and for found faults' during maintenance. Ability to scope and carry out independent and vital inspections. Maintain personal & teams task authorisation for working on components in accordance with AMC requirements. Required to provide support and guidance, including allocation of tasks to appropriately authorised maintenance technicians. Provide effective leadership and supervision to team members under your direct supervision. Key Activities: Performance indicators - Ensure the effective management of Part 145 activities by setting delivery targets, monitoring progress and developing performance improvement programmes. Prioritises activities within/across teams to maximise efficiency. Represents the Maintenance Manager at management reviews, where necessary. Responsible for the assessment of escalated issues for any impact on Continuing Airworthiness and generating effective resolution, or sponsoring escalation to management, as appropriate. Completion of activities - Ensure all Part 145 activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Ensure all Part 145 activities are performed by suitably qualified, experienced and authorised personnel. Ensure the integration of Part 145 activity within the business, including the engagement of key stakeholders at all stages of the process. Provide support and guidance to the team(s). Procedure/standards - Manage the Part 145 team(s) compliance with the Part 145 Exposition, its associated procedures and standards, and any other Company procedures and standards, as applicable. Identify, propose and implement change as required, whilst ensuring compliance. Safety Management System - Promote the application of Human Factors, Error Management, Risk Management and Safety Assurance within the Part 145 team(s), together with the proactive analysis, mitigation and management of Hazards. Management System Assurance - Ensure Part 145 team(s) activities are compliant with the AM&S Governance and Assurance framework. Ensure Process Confirmations and independent assurance audits are supported by Part 145 personnel and integrated within/across teams. Manage the response to audit findings in a timely and appropriate manner and provide information into the relevant reviews. Generate and implement effective improvements within/across teams to overcome any non-compliance and monitor effectiveness. Statutory/Regulatory & Legislative requirements - Able to demonstrate a good understanding and application of the relevant Continuing Airworthiness Regulatory framework, and ensure any Regulatory-driven changes are implemented within the Part 145 team(s) activities. Ensure compliance with all other requirements, eg ITAR, EaPW, ISO, etc. Contractual Requirements - Ensure compliance with all applicable contractual requirements, eg through support to contract reviews, and ensure any changes are implemented into the Part 145 activities, as appropriate. Requirements: Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship/qualifications. Academic qualification for this role is a minimum of City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Experienced and competent leader at this level. Typically 2+ years' experience including type, classed as fully competent with all required 'Authorities' in place. Demonstrating breadth of experience, currency & recency via a Log Book (electronic or paper) capturing skills, knowledge and authorities for working on Aircraft type or in bays. Practical experience and expertise in the application of aviation safety standards and safe operating practices. A comprehensive knowledge of the Acceptable Means of Compliance. Management training. Leadership- Foundation. Human Factors- Standard Course Specification. E&PW Awareness- Standard Course Specification. ITAR Awareness- Standard Course Specification. Benefits Competitive Basic Salary 25 Days Annual Leave Annual Bonus On site Parking Pension Scheme Life Assurance
Position: B1/2 Licenced Engineer Location: East Midlands Working Hours: 5-5-4 Shift Pattern Competitive Salary + Excellent Benefits! Great Work-Life Balance with a 5-5-4 Shift Pattern! Type Rating Training included for the right individuals! Opportunities for professional development! For more details, read on! Actively seeking talented Licenced Engineers to join our talent Engineering Team on an exciting project based in East Midlands. This opportunity is to support a high-profile customer through a dedicated workforce understanding the need to deliver impeccable service in an active operational environment. To be considered for this position you will hold, a UK CAA Part 66 B1, B2 or B3 Licence with no limitations on airframe or engine that would otherwise restrict the addition of Group 3 type rating for: Vulcanair P68R Victor' Preferred candidates will already hold the Group 3 type rating, however applicants with other similar type ratings will be considered as training and type courses may be provided. Mission system operating and maintenance experience also desirable. The successful candidate will join a long established and respected forward-thinking company that has a proven pedigree in career development within the organisation. As part of this role, you must be prepared to work flexibly as part of a team and as an integral part of the Gama Engineering Group, possessing strong communication, organisation and leadership skills. / About us: A hugely diverse business that offers much more than perhaps its name would suggest. Yes, we fly but we also save lives, provide mission critical intelligence, and build systems that deliver decisive advantage. With operations in the UK, US, Middle East and Hong Kong a career with us can offer travel, personal growth opportunities and the ability for long-term progression in a fast paced and dynamic service industry. / Responsibilities: Responsible for the successful completion of all allocated, planned and ad-hoc maintenance tasks Ensure the completion of scheduled customer order requirements when acting as supervising, certifying or category C engineer for a given input Responsible for the management of and performance/quality of performed works in compliance with applicable company process and procedures Ensure correct compliance with applicable regulatory requirements Maintain the required engineering licence and applicable type rating as required to perform duties and be responsible for ensuring licences and type ratings do not lapse and are kept up to date Accountable for providing professional communication with customers and contacts as required Individual responsibility for booking accurate, and consistent timekeeping in applicable software system / Skills, Qualifications and Experience required: Essential An Unrestricted UK CAA Part 66 Licence Category B1, B2 and/or B3 Previous aircraft base maintenance experience with a wide knowledge and skill range in servicing, inspection repair and modifications Satisfactory recency as required for issue of applicable certifying approval Full UK Driving Licence Advantageous Hold the Group 3 type rating for Vulcanair P68R / In addition to a Competitive Salary, we will offer you: Great work life balance with a 5-5-4 shift pattern Competitive Group Pension Scheme Life Assurance. Income Protection. Travel Insurance. Private Healthcare (after successful passing of probation). Free Car Parking 2 Paid Volunteering Days each calendar year (subject to line manager approval) .(Subject to insurance underwriting) Due to the volume of applications received, only candidates selected for interview will be contacted. If you do not hear from us within 20 working days then your application has been unsuccessful on this occasion.
29/04/2024
Full time
Position: B1/2 Licenced Engineer Location: East Midlands Working Hours: 5-5-4 Shift Pattern Competitive Salary + Excellent Benefits! Great Work-Life Balance with a 5-5-4 Shift Pattern! Type Rating Training included for the right individuals! Opportunities for professional development! For more details, read on! Actively seeking talented Licenced Engineers to join our talent Engineering Team on an exciting project based in East Midlands. This opportunity is to support a high-profile customer through a dedicated workforce understanding the need to deliver impeccable service in an active operational environment. To be considered for this position you will hold, a UK CAA Part 66 B1, B2 or B3 Licence with no limitations on airframe or engine that would otherwise restrict the addition of Group 3 type rating for: Vulcanair P68R Victor' Preferred candidates will already hold the Group 3 type rating, however applicants with other similar type ratings will be considered as training and type courses may be provided. Mission system operating and maintenance experience also desirable. The successful candidate will join a long established and respected forward-thinking company that has a proven pedigree in career development within the organisation. As part of this role, you must be prepared to work flexibly as part of a team and as an integral part of the Gama Engineering Group, possessing strong communication, organisation and leadership skills. / About us: A hugely diverse business that offers much more than perhaps its name would suggest. Yes, we fly but we also save lives, provide mission critical intelligence, and build systems that deliver decisive advantage. With operations in the UK, US, Middle East and Hong Kong a career with us can offer travel, personal growth opportunities and the ability for long-term progression in a fast paced and dynamic service industry. / Responsibilities: Responsible for the successful completion of all allocated, planned and ad-hoc maintenance tasks Ensure the completion of scheduled customer order requirements when acting as supervising, certifying or category C engineer for a given input Responsible for the management of and performance/quality of performed works in compliance with applicable company process and procedures Ensure correct compliance with applicable regulatory requirements Maintain the required engineering licence and applicable type rating as required to perform duties and be responsible for ensuring licences and type ratings do not lapse and are kept up to date Accountable for providing professional communication with customers and contacts as required Individual responsibility for booking accurate, and consistent timekeeping in applicable software system / Skills, Qualifications and Experience required: Essential An Unrestricted UK CAA Part 66 Licence Category B1, B2 and/or B3 Previous aircraft base maintenance experience with a wide knowledge and skill range in servicing, inspection repair and modifications Satisfactory recency as required for issue of applicable certifying approval Full UK Driving Licence Advantageous Hold the Group 3 type rating for Vulcanair P68R / In addition to a Competitive Salary, we will offer you: Great work life balance with a 5-5-4 shift pattern Competitive Group Pension Scheme Life Assurance. Income Protection. Travel Insurance. Private Healthcare (after successful passing of probation). Free Car Parking 2 Paid Volunteering Days each calendar year (subject to line manager approval) .(Subject to insurance underwriting) Due to the volume of applications received, only candidates selected for interview will be contacted. If you do not hear from us within 20 working days then your application has been unsuccessful on this occasion.
Job Title: B1/B2 Licensed Aircraft Engineer Location: Line Stations across the UK Permanent/contract positions Our client has multiple openings for experienced B1 and B1/B2 licensed aircraft engineers to support line maintenance activities at stations across the UK. Responsibilities Perform line maintenance inspections and troubleshooting on various narrow body aircraft types such as B737NG and advantageous if experienced on B757/B767 Rectify aircraft defects and faults to return aircraft back to service Conduct maintenance tasks according to approved data and regulatory standards Accurately document all work carried out in aircraft logs and records Liaise with pilots, engineers and planners to coordinate maintenance schedules Requirements Hold a valid B1 or B1/B2 Aircraft Engineer's License issued by EASA/CAA Have B737NG type training and certification Previous line maintenance experience is essential Demonstrate 6 months system/component recency in the last 2 years Have current EWIS, Human Factors, Fuel Tank Safety and SMS qualifications Eligibility to work in the UK with appropriate visa status What We Offer Competitive salary and benefit packages Ongoing learning/development opportunities Shared van accommodation available The chance to work with a fantastic team of engineers across the UK So if you are an experienced and knowledgeable B1 or B1/B2 licensed engineer looking for an exciting line maintenance engineering role until October 2024, apply today! We have positions available across multiple UK line stations.
29/04/2024
Job Title: B1/B2 Licensed Aircraft Engineer Location: Line Stations across the UK Permanent/contract positions Our client has multiple openings for experienced B1 and B1/B2 licensed aircraft engineers to support line maintenance activities at stations across the UK. Responsibilities Perform line maintenance inspections and troubleshooting on various narrow body aircraft types such as B737NG and advantageous if experienced on B757/B767 Rectify aircraft defects and faults to return aircraft back to service Conduct maintenance tasks according to approved data and regulatory standards Accurately document all work carried out in aircraft logs and records Liaise with pilots, engineers and planners to coordinate maintenance schedules Requirements Hold a valid B1 or B1/B2 Aircraft Engineer's License issued by EASA/CAA Have B737NG type training and certification Previous line maintenance experience is essential Demonstrate 6 months system/component recency in the last 2 years Have current EWIS, Human Factors, Fuel Tank Safety and SMS qualifications Eligibility to work in the UK with appropriate visa status What We Offer Competitive salary and benefit packages Ongoing learning/development opportunities Shared van accommodation available The chance to work with a fantastic team of engineers across the UK So if you are an experienced and knowledgeable B1 or B1/B2 licensed engineer looking for an exciting line maintenance engineering role until October 2024, apply today! We have positions available across multiple UK line stations.
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
29/04/2024
Full time
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
We are currently looking on behalf of one of our important clients for a Software Packaging Specialist (Medical Device Sector). The role is a permanent position based in Bern Canton with good home office allowance. Your Role: Configure, test & deploy software packages for Windows 10/11, Android, iOS & macOS devices. Automate software deployment & approval processes. Support the further development & operation of Mobile Device Management (MDM) Partake in incident management in the area of Software Delivery at 2nd & 3rd level. Ensure necessary system documentation. Administrate on-premise &/or SaaS applications. Your Skills: At least 2 years of relevant professional experience as an Software Packaging Specialist, ICT System Specialist or Client Engineer or Similar. A strong knowledge & experience in the areas of Software Packaging & Deployment, Automation, PowerShell & Azure Your Profile: Completed Higher Education/University Degree in Computer Science (or similar). Analytical, conceptual, communicative & team-oriented. Self-motivated, systematic & structured. Fluent English & business proficient German (to at least B2 level) language skills are mandatory requirements.
29/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Software Packaging Specialist (Medical Device Sector). The role is a permanent position based in Bern Canton with good home office allowance. Your Role: Configure, test & deploy software packages for Windows 10/11, Android, iOS & macOS devices. Automate software deployment & approval processes. Support the further development & operation of Mobile Device Management (MDM) Partake in incident management in the area of Software Delivery at 2nd & 3rd level. Ensure necessary system documentation. Administrate on-premise &/or SaaS applications. Your Skills: At least 2 years of relevant professional experience as an Software Packaging Specialist, ICT System Specialist or Client Engineer or Similar. A strong knowledge & experience in the areas of Software Packaging & Deployment, Automation, PowerShell & Azure Your Profile: Completed Higher Education/University Degree in Computer Science (or similar). Analytical, conceptual, communicative & team-oriented. Self-motivated, systematic & structured. Fluent English & business proficient German (to at least B2 level) language skills are mandatory requirements.
We are currently looking on behalf of one of our important clients for a Mobile Device Management (MDM) Specialist - Medical Device Sector. The role is a permanent position based in Bern Canton with good home office allowance. Your Role: Further develop & operate Mobile Device Management (MDM) infrastructure to manage Windows 10/11, macOS, iOS, Android & mixed reality devices. Further develop & operate on-premise &/or SaaS applications. Analyze & remediate incidents related to MDM infrastructure at 2nd & 3rd level. Create & implement changes related to MDM infrastructure. Ensure necessary system documentation. Capture & categorize business requirements in the area of MDM. Develop, document & operate automatisms in the field of MDM. Create procedures, escalation procedures & workflow rules for MDM exceptions. Your Skills: At least 2 years of relevant professional experience as an MDM Specialist, Modern Workplace Specialist, ICT System Specialist or Client Engineer. A strong knowledge & experience in the field of Mobile Device Management (MDM), preferably including experience in Microsoft Intune. Your Profile: Completed Higher Education/University Degree in Computer Science (or similar). Analytical, conceptual, communicative & team-oriented. Self-motivated, systematic & structured. Fluent English & business proficient German (to at least B2 level) language skills are mandatory requirements.
29/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Mobile Device Management (MDM) Specialist - Medical Device Sector. The role is a permanent position based in Bern Canton with good home office allowance. Your Role: Further develop & operate Mobile Device Management (MDM) infrastructure to manage Windows 10/11, macOS, iOS, Android & mixed reality devices. Further develop & operate on-premise &/or SaaS applications. Analyze & remediate incidents related to MDM infrastructure at 2nd & 3rd level. Create & implement changes related to MDM infrastructure. Ensure necessary system documentation. Capture & categorize business requirements in the area of MDM. Develop, document & operate automatisms in the field of MDM. Create procedures, escalation procedures & workflow rules for MDM exceptions. Your Skills: At least 2 years of relevant professional experience as an MDM Specialist, Modern Workplace Specialist, ICT System Specialist or Client Engineer. A strong knowledge & experience in the field of Mobile Device Management (MDM), preferably including experience in Microsoft Intune. Your Profile: Completed Higher Education/University Degree in Computer Science (or similar). Analytical, conceptual, communicative & team-oriented. Self-motivated, systematic & structured. Fluent English & business proficient German (to at least B2 level) language skills are mandatory requirements.
We are currently looking on behalf of one of our important clients for an IT Systems Engineer (German Speaking). The role is permanent position based in Aargau Canton & comes with good home office allowance. Your role: Hold joint responsibility for ensuring the IT operations of a cloud & on-premise VMware infrastructure, including its security measures. Build & administer Windows & Linux systems & hold responsibility for their monitoring, backups & life cycle. Work on IT projects & accompany their technical implementation. Handle support requests within 2nd & 3rd level. Partake in on-call service for around 6 weeks per year. Your Skills & Experience: At least 4 years of professional experience in IT Systems Engineering. An in-depth knowledge of Windows and/or Linux Operating Systems. Skilled & experienced in Networking & Cloud Infrastructure. Sound expertise in Virtualization, Storage & Backup. Ideally experienced in Security Operations, SysOps & Automation/IaC. Your Profile: Completed University Degree in the area Computer Science or Similar. Fluent in English & German (spoken & written) to at least C1 Level is a Mandatory Requirement.
29/04/2024
Full time
We are currently looking on behalf of one of our important clients for an IT Systems Engineer (German Speaking). The role is permanent position based in Aargau Canton & comes with good home office allowance. Your role: Hold joint responsibility for ensuring the IT operations of a cloud & on-premise VMware infrastructure, including its security measures. Build & administer Windows & Linux systems & hold responsibility for their monitoring, backups & life cycle. Work on IT projects & accompany their technical implementation. Handle support requests within 2nd & 3rd level. Partake in on-call service for around 6 weeks per year. Your Skills & Experience: At least 4 years of professional experience in IT Systems Engineering. An in-depth knowledge of Windows and/or Linux Operating Systems. Skilled & experienced in Networking & Cloud Infrastructure. Sound expertise in Virtualization, Storage & Backup. Ideally experienced in Security Operations, SysOps & Automation/IaC. Your Profile: Completed University Degree in the area Computer Science or Similar. Fluent in English & German (spoken & written) to at least C1 Level is a Mandatory Requirement.
Job Title: B1/B2 Licensed Aircraft Engineer Location: Line Stations across the UK Permanent/contract positions Our client has multiple openings for experienced B1 and B1/B2 licensed aircraft engineers to support line maintenance activities at stations across the UK. Responsibilities Perform line maintenance inspections and troubleshooting on various narrow body aircraft types such as B737NG and advantageous if experienced on B757/B767 Rectify aircraft defects and faults to return aircraft back to service Conduct maintenance tasks according to approved data and regulatory standards Accurately document all work carried out in aircraft logs and records Liaise with pilots, engineers and planners to coordinate maintenance schedules Requirements Hold a valid B1 or B1/B2 Aircraft Engineer's License issued by EASA/CAA Have B737NG type training and certification Previous line maintenance experience is essential Demonstrate 6 months system/component recency in the last 2 years Have current EWIS, Human Factors, Fuel Tank Safety and SMS qualifications Eligibility to work in the UK with appropriate visa status What We Offer Competitive salary and benefit packages Ongoing learning/development opportunities Shared van accommodation available The chance to work with a fantastic team of engineers across the UK So if you are an experienced and knowledgeable B1 or B1/B2 licensed engineer looking for an exciting line maintenance engineering role until October 2024, apply today! We have positions available across multiple UK line stations.
29/04/2024
Full time
Job Title: B1/B2 Licensed Aircraft Engineer Location: Line Stations across the UK Permanent/contract positions Our client has multiple openings for experienced B1 and B1/B2 licensed aircraft engineers to support line maintenance activities at stations across the UK. Responsibilities Perform line maintenance inspections and troubleshooting on various narrow body aircraft types such as B737NG and advantageous if experienced on B757/B767 Rectify aircraft defects and faults to return aircraft back to service Conduct maintenance tasks according to approved data and regulatory standards Accurately document all work carried out in aircraft logs and records Liaise with pilots, engineers and planners to coordinate maintenance schedules Requirements Hold a valid B1 or B1/B2 Aircraft Engineer's License issued by EASA/CAA Have B737NG type training and certification Previous line maintenance experience is essential Demonstrate 6 months system/component recency in the last 2 years Have current EWIS, Human Factors, Fuel Tank Safety and SMS qualifications Eligibility to work in the UK with appropriate visa status What We Offer Competitive salary and benefit packages Ongoing learning/development opportunities Shared van accommodation available The chance to work with a fantastic team of engineers across the UK So if you are an experienced and knowledgeable B1 or B1/B2 licensed engineer looking for an exciting line maintenance engineering role until October 2024, apply today! We have positions available across multiple UK line stations.
Job Title: B1/B2 Licensed Aircraft Engineer Location: Line Stations across the UK Permanent/contract positions Our client has multiple openings for experienced B1 and B1/B2 licensed aircraft engineers to support line maintenance activities at stations across the UK. Responsibilities Perform line maintenance inspections and troubleshooting on various narrow body aircraft types such as B737NG and advantageous if experienced on B757/B767 Rectify aircraft defects and faults to return aircraft back to service Conduct maintenance tasks according to approved data and regulatory standards Accurately document all work carried out in aircraft logs and records Liaise with pilots, engineers and planners to coordinate maintenance schedules Requirements Hold a valid B1 or B1/B2 Aircraft Engineer's License issued by EASA/CAA Have B737NG type training and certification Previous line maintenance experience is essential Demonstrate 6 months system/component recency in the last 2 years Have current EWIS, Human Factors, Fuel Tank Safety and SMS qualifications Eligibility to work in the UK with appropriate visa status What We Offer Competitive salary and benefit packages Ongoing learning/development opportunities Shared van accommodation available The chance to work with a fantastic team of engineers across the UK So if you are an experienced and knowledgeable B1 or B1/B2 licensed engineer looking for an exciting line maintenance engineering role until October 2024, apply today! We have positions available across multiple UK line stations.
29/04/2024
Job Title: B1/B2 Licensed Aircraft Engineer Location: Line Stations across the UK Permanent/contract positions Our client has multiple openings for experienced B1 and B1/B2 licensed aircraft engineers to support line maintenance activities at stations across the UK. Responsibilities Perform line maintenance inspections and troubleshooting on various narrow body aircraft types such as B737NG and advantageous if experienced on B757/B767 Rectify aircraft defects and faults to return aircraft back to service Conduct maintenance tasks according to approved data and regulatory standards Accurately document all work carried out in aircraft logs and records Liaise with pilots, engineers and planners to coordinate maintenance schedules Requirements Hold a valid B1 or B1/B2 Aircraft Engineer's License issued by EASA/CAA Have B737NG type training and certification Previous line maintenance experience is essential Demonstrate 6 months system/component recency in the last 2 years Have current EWIS, Human Factors, Fuel Tank Safety and SMS qualifications Eligibility to work in the UK with appropriate visa status What We Offer Competitive salary and benefit packages Ongoing learning/development opportunities Shared van accommodation available The chance to work with a fantastic team of engineers across the UK So if you are an experienced and knowledgeable B1 or B1/B2 licensed engineer looking for an exciting line maintenance engineering role until October 2024, apply today! We have positions available across multiple UK line stations.
We are currently looking on behalf of one of our important clients for a 1st Level ICT Supporter. The role is a permanent position based Bern Canton & comes with some home office allowance. Your Role: Provide hotline & support for IT: workstations, specialist applications, printers, clients, mobile devices & telephony. Manage incidents & requests in a ticketing system. Analyze & develop solutions for the sustainable safeguarding of client services. Create & maintain specific user & operational documentation. Partage in Active Directory User Management, Device Management & Mobile Device Management. Set up, configure & deploy clients & organize & execute hardware replacements globally. Support an engineering team with integrations & innovations to client services & assist with the integration of client software & hardware. Your Skills: At least 2 years of professional experience in IT Support. Sound expertise in Microsoft Operating Systems & M365 Office products. Your Profile: Further Educated in Computer Science or similar. Customer & service-oriented, Communicative, reliable, committed & customer & service-oriented A native/fluent German or French speaker with a good knowledge of the other language. English language skills are also advantageous.
29/04/2024
Full time
We are currently looking on behalf of one of our important clients for a 1st Level ICT Supporter. The role is a permanent position based Bern Canton & comes with some home office allowance. Your Role: Provide hotline & support for IT: workstations, specialist applications, printers, clients, mobile devices & telephony. Manage incidents & requests in a ticketing system. Analyze & develop solutions for the sustainable safeguarding of client services. Create & maintain specific user & operational documentation. Partage in Active Directory User Management, Device Management & Mobile Device Management. Set up, configure & deploy clients & organize & execute hardware replacements globally. Support an engineering team with integrations & innovations to client services & assist with the integration of client software & hardware. Your Skills: At least 2 years of professional experience in IT Support. Sound expertise in Microsoft Operating Systems & M365 Office products. Your Profile: Further Educated in Computer Science or similar. Customer & service-oriented, Communicative, reliable, committed & customer & service-oriented A native/fluent German or French speaker with a good knowledge of the other language. English language skills are also advantageous.