We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
29/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
Electrical, Control & Instrumentation Engineer - Staffordshire - Up to £65,000 We have partnered with an organisation who specialises in digital transformations and operational technology who have been ahead of the game with their advanced systems for years. The business who are going from strength to strength, are looking to hire a Electrical, Control & Instrumentation Engineer to be part of the business's world class team ahead of their expanding project opportunities. The Electrical, Control & Instrumentation Engineer will be primary based in the office in Stafford and will be designing hardware systems using various hardware components for a key focus on MCCs, PLCs, Switchgear and Drives & Controls. Essential requirements for the Electrical, Control & Instrumentation Engineer: - Strong understanding of designing electrical panels containing PLC's and LV distribution systems. - Design of containment systems and electrical cabling - Proven experience of AutoCAD Electrical, Microsoft office products. - Working with production to see the design through to completion. - Mentoring experience with junior engineer - Understanding of IEC BS EN 61439-1,Low-voltage switchgear and control gear assemblies - Ability to develop technical solutions to meet customer and project expectations - Working knowledge of BS7671 IEE 18th Edition Wiring Regulations Benefits of the Electrical, Control & Instrumentation Engineer: - 25 days holiday plus bank holidays Tailored pension planning scheme - Life assurance policy and private health care - Support in achieving professional engineer status (IEng, CEng) and professional memberships fees covered. Electrical, Control & Instrumentation Engineer - Staffordshire - Up to £65,000 To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Dan Freeman , by exploring the VIQU IT Recruitment website . If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply).
29/04/2024
Full time
Electrical, Control & Instrumentation Engineer - Staffordshire - Up to £65,000 We have partnered with an organisation who specialises in digital transformations and operational technology who have been ahead of the game with their advanced systems for years. The business who are going from strength to strength, are looking to hire a Electrical, Control & Instrumentation Engineer to be part of the business's world class team ahead of their expanding project opportunities. The Electrical, Control & Instrumentation Engineer will be primary based in the office in Stafford and will be designing hardware systems using various hardware components for a key focus on MCCs, PLCs, Switchgear and Drives & Controls. Essential requirements for the Electrical, Control & Instrumentation Engineer: - Strong understanding of designing electrical panels containing PLC's and LV distribution systems. - Design of containment systems and electrical cabling - Proven experience of AutoCAD Electrical, Microsoft office products. - Working with production to see the design through to completion. - Mentoring experience with junior engineer - Understanding of IEC BS EN 61439-1,Low-voltage switchgear and control gear assemblies - Ability to develop technical solutions to meet customer and project expectations - Working knowledge of BS7671 IEE 18th Edition Wiring Regulations Benefits of the Electrical, Control & Instrumentation Engineer: - 25 days holiday plus bank holidays Tailored pension planning scheme - Life assurance policy and private health care - Support in achieving professional engineer status (IEng, CEng) and professional memberships fees covered. Electrical, Control & Instrumentation Engineer - Staffordshire - Up to £65,000 To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Dan Freeman , by exploring the VIQU IT Recruitment website . If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply).
We are currently looking on behalf of one of our important clients for an Electronic Hardware Design Engineer. The role is a permanent position based Bern Canton & comes with some home office allowance. Your Role: Develop Electronics Solutions for customers, projects & a new product portfolio. Design, implement, document & verify Electronic HW for new & existing control systems. Work on international projects & participate in risk & safety assessments within interdisciplinary teams. Design prototypes & test infrastructure & automation solutions, implement them, take over technical product support across the entire product life cycle & support with production, assembly & commissioning work. Plan & carry out standard tests in-house, in external test laboratories & on customer premises. Your Skills: At least 3 years of relevant professional experience in Electronic Hardware Engineering & very proficient Electronic Development skills. Skilled & experienced in the Development of Industrial Control Electronics (CAN, BLDC, ACDC, EMC). Good Soldering skills. A knowledge of one or more PCB design tools (OrCAD, Altium, Mentor) is considered advantageous. Any experience in Python, C/C++ or similar programming languages is a plus. Ideally experienced in Motor Control. Experience in Obsolescence Management is desirable. Preferably experienced in the Transportation Industry, Industrial Environments, Safety-Critical Industries & Series Production. Your Profile: Completed University Degree in the field of Electronics, Electrical Engineering, Computer Science or similar. Enthusiastic to cooperate within Interdisciplinary Project Teams. Fluent in English (spoken & written). Any additional language skills in German or French are considered very advantageous.
29/04/2024
Full time
We are currently looking on behalf of one of our important clients for an Electronic Hardware Design Engineer. The role is a permanent position based Bern Canton & comes with some home office allowance. Your Role: Develop Electronics Solutions for customers, projects & a new product portfolio. Design, implement, document & verify Electronic HW for new & existing control systems. Work on international projects & participate in risk & safety assessments within interdisciplinary teams. Design prototypes & test infrastructure & automation solutions, implement them, take over technical product support across the entire product life cycle & support with production, assembly & commissioning work. Plan & carry out standard tests in-house, in external test laboratories & on customer premises. Your Skills: At least 3 years of relevant professional experience in Electronic Hardware Engineering & very proficient Electronic Development skills. Skilled & experienced in the Development of Industrial Control Electronics (CAN, BLDC, ACDC, EMC). Good Soldering skills. A knowledge of one or more PCB design tools (OrCAD, Altium, Mentor) is considered advantageous. Any experience in Python, C/C++ or similar programming languages is a plus. Ideally experienced in Motor Control. Experience in Obsolescence Management is desirable. Preferably experienced in the Transportation Industry, Industrial Environments, Safety-Critical Industries & Series Production. Your Profile: Completed University Degree in the field of Electronics, Electrical Engineering, Computer Science or similar. Enthusiastic to cooperate within Interdisciplinary Project Teams. Fluent in English (spoken & written). Any additional language skills in German or French are considered very advantageous.
Please note: this role is based in Somerset, please don't apply unless you can work in this location. Description The Black Hat Supervisor will support and supervise projects of Temporary Buildings or Structures erection on site (subcontracted projects). As a Black Hat (non-working supervisor), manage all Health & Safety aspects of Installation activities and on site Risk Assessments/Point of Work Risk Assessments review, Toolbox Talks and on site supervision ensuring that all company policies are adhered to. Main Responsibilities Provide technical advice and propose technical solutions where required Review and approve technical & safety documentation Be involved in technical and planning discussions with client (Principal Contractor) Ensure installation of works is as per design and process Deliver works on time and within parameters of the budget set for the task. Supervise contracted staff Prepare site reports and fill in needed documentation Manage and ensure compliance of the NNB permit to work processes Attend coordination meetings with the Principal Contractor and their other tier 1 contractors Act as Incident Controller (IC) Act as Trauma and Medical Immediate Care (TMIC) Key Skills and expertise HPC experience (desirable) Computer literate Basic mechanical & electrical knowledge Candidate must be a strong team leader who pays attention to safety and quality as a priority, always leading by example Must be able to set people to work and ensure works are delivered as per design, on time and on budget Project management Large Construction Teams management Team working and relationship-building skills Communication skills Technical skills Industrial relations management An eye for detail Problem solving Experience in managing people on large scale/international projects Qualifications Essential Level 3 Apprenticeship in at least one of the following: Engineering Construction - Pipefitting Standard or Mechanical or Plating; Maintenance and Operations Engineering Technician;Engineering Fitter;Metal Fabricator;Project Controls TechnicianEnrolment onto ILM Level 3 Certificate C&BE plus completion of Nuclear Unit or Nuclear Engineering Construction Supervisor (NECS) And at least one of the following: LATS, SMSTS or IOSH Managing Safely Essential training for the role (HPC specific training)CCNSGTMIC trained (First Aid at Work trained) TMIC trained (First Aid at Work trained) IC trained Ideally Experience on HPC one of A,B,C & D or One of the following from A or All of B and one of the following from C and D: A Level 3 Apprenticeship: - Engineering Construction - Pipefitting Standard or Mechanical or Plating; - Maintenance and Operations Engineering Technician; - Engineering Fitter; - Metal Fabricator; - Project Controls Technician Certificate of Apprenticeship in Plating ACE Card demonstrating Level 3 Diploma in any of the following disciplines: Pipefitting, Mechanical, Plating, Fabricator, B B0 H0/CSQ/SCNI/M1/HN1 large component replacement or HN1 reactor opening and closing (OFC) C Enrolment onto ILM Level 3 Certificate C&BE plus completion of Nuclear Unit Nuclear Engineering Construction Supervisor (NECS) D LATS SMSTS IOSH Managing Safely
29/04/2024
Project-based
Please note: this role is based in Somerset, please don't apply unless you can work in this location. Description The Black Hat Supervisor will support and supervise projects of Temporary Buildings or Structures erection on site (subcontracted projects). As a Black Hat (non-working supervisor), manage all Health & Safety aspects of Installation activities and on site Risk Assessments/Point of Work Risk Assessments review, Toolbox Talks and on site supervision ensuring that all company policies are adhered to. Main Responsibilities Provide technical advice and propose technical solutions where required Review and approve technical & safety documentation Be involved in technical and planning discussions with client (Principal Contractor) Ensure installation of works is as per design and process Deliver works on time and within parameters of the budget set for the task. Supervise contracted staff Prepare site reports and fill in needed documentation Manage and ensure compliance of the NNB permit to work processes Attend coordination meetings with the Principal Contractor and their other tier 1 contractors Act as Incident Controller (IC) Act as Trauma and Medical Immediate Care (TMIC) Key Skills and expertise HPC experience (desirable) Computer literate Basic mechanical & electrical knowledge Candidate must be a strong team leader who pays attention to safety and quality as a priority, always leading by example Must be able to set people to work and ensure works are delivered as per design, on time and on budget Project management Large Construction Teams management Team working and relationship-building skills Communication skills Technical skills Industrial relations management An eye for detail Problem solving Experience in managing people on large scale/international projects Qualifications Essential Level 3 Apprenticeship in at least one of the following: Engineering Construction - Pipefitting Standard or Mechanical or Plating; Maintenance and Operations Engineering Technician;Engineering Fitter;Metal Fabricator;Project Controls TechnicianEnrolment onto ILM Level 3 Certificate C&BE plus completion of Nuclear Unit or Nuclear Engineering Construction Supervisor (NECS) And at least one of the following: LATS, SMSTS or IOSH Managing Safely Essential training for the role (HPC specific training)CCNSGTMIC trained (First Aid at Work trained) TMIC trained (First Aid at Work trained) IC trained Ideally Experience on HPC one of A,B,C & D or One of the following from A or All of B and one of the following from C and D: A Level 3 Apprenticeship: - Engineering Construction - Pipefitting Standard or Mechanical or Plating; - Maintenance and Operations Engineering Technician; - Engineering Fitter; - Metal Fabricator; - Project Controls Technician Certificate of Apprenticeship in Plating ACE Card demonstrating Level 3 Diploma in any of the following disciplines: Pipefitting, Mechanical, Plating, Fabricator, B B0 H0/CSQ/SCNI/M1/HN1 large component replacement or HN1 reactor opening and closing (OFC) C Enrolment onto ILM Level 3 Certificate C&BE plus completion of Nuclear Unit Nuclear Engineering Construction Supervisor (NECS) D LATS SMSTS IOSH Managing Safely
Senior Systems Engineer - DOORS - Naval/Maritime - Radar OUTSIDE IR35 AVAILABLE Job Functions Activities will include all aspects of the Systems Engineering life cycle from System Concept through to Delivery and Acceptance, including Bid Support, System Design, Integration, Verification and Customer Acceptance. You will be responsible for the specification, development, integration, verification and acceptance of systems for both Internal and External Customers. You will have the ability to deal with a variety of people from different disciplines, organisations and nationalities on a daily basis to deliver the systems engineering aspects of projects, as required. You will take an active role in the definition, realisation and proving of new products which build upon reputation for innovation and leading edge technology. You will manage stakeholders throughout the system life cycle through a pro-active approach and effective communication. You will create a variety of technical documentation for both technical and non-technical readership. Travel within the UK and overseas is required and is considered a regular feature of this role. Requests could be made at short notice. Any other task associated with this role Requirements Essential Experience of systems design, integration & test. An understanding of Systems and Product life cycles from concept through to delivery. An understanding of a range of Engineering disciplines (Software, Mechanical, and Electrical). Good inter-personal skills with the ability to communicate to all levels within the organisation and externally. The flexibility to apply skills and knowledge across a number of different projects and products across the organisation. Computer literate with a good standard of written English, capable of compiling accurate, detailed and well-presented technical proposals, specifications and reports. A willingness to travel. (NB whilst this role is based at our Enfield premises, a certain amount of business travel will be required depending upon project requirements). Degree (or equivalent) qualified in an engineering or science discipline. Desirable (Not Essential) An understanding of Radar Systems is desirable, although not essential if other complementary skills demonstrate a capacity to understand new technologies quickly and effectively. Experience of the whole product life cycle (concept generation, concept demonstration, development, production and in-service support). Experience of working with and developing systems using communications protocols. (eg, RS485, RS232, TCP/IP, Canbus etc.) Experience of working on product development for Naval Platforms. Experience of working on or with Navigation equipment. The ability to lead multi-skilled engineering teams. The ability to deliver engineering packages of work to time, cost, and quality. Member of a Professional Engineering Institution (eg, IMechE, IET, INCOSE). UK Security clearance. UK Driving License.
29/04/2024
Project-based
Senior Systems Engineer - DOORS - Naval/Maritime - Radar OUTSIDE IR35 AVAILABLE Job Functions Activities will include all aspects of the Systems Engineering life cycle from System Concept through to Delivery and Acceptance, including Bid Support, System Design, Integration, Verification and Customer Acceptance. You will be responsible for the specification, development, integration, verification and acceptance of systems for both Internal and External Customers. You will have the ability to deal with a variety of people from different disciplines, organisations and nationalities on a daily basis to deliver the systems engineering aspects of projects, as required. You will take an active role in the definition, realisation and proving of new products which build upon reputation for innovation and leading edge technology. You will manage stakeholders throughout the system life cycle through a pro-active approach and effective communication. You will create a variety of technical documentation for both technical and non-technical readership. Travel within the UK and overseas is required and is considered a regular feature of this role. Requests could be made at short notice. Any other task associated with this role Requirements Essential Experience of systems design, integration & test. An understanding of Systems and Product life cycles from concept through to delivery. An understanding of a range of Engineering disciplines (Software, Mechanical, and Electrical). Good inter-personal skills with the ability to communicate to all levels within the organisation and externally. The flexibility to apply skills and knowledge across a number of different projects and products across the organisation. Computer literate with a good standard of written English, capable of compiling accurate, detailed and well-presented technical proposals, specifications and reports. A willingness to travel. (NB whilst this role is based at our Enfield premises, a certain amount of business travel will be required depending upon project requirements). Degree (or equivalent) qualified in an engineering or science discipline. Desirable (Not Essential) An understanding of Radar Systems is desirable, although not essential if other complementary skills demonstrate a capacity to understand new technologies quickly and effectively. Experience of the whole product life cycle (concept generation, concept demonstration, development, production and in-service support). Experience of working with and developing systems using communications protocols. (eg, RS485, RS232, TCP/IP, Canbus etc.) Experience of working on product development for Naval Platforms. Experience of working on or with Navigation equipment. The ability to lead multi-skilled engineering teams. The ability to deliver engineering packages of work to time, cost, and quality. Member of a Professional Engineering Institution (eg, IMechE, IET, INCOSE). UK Security clearance. UK Driving License.
We are currently looking on behalf of one of our important clients for a Head of Embedded Software Development. The role is a permanent position based in Bern Canton & comes with some home office flexibility. Your Role: Oversee the Technical & Personnel Management & further development of a Software & Control Specialist Team containing 6 Engineers. Further develop software development processes in collaboration with R&D Management. Ensure the implementation of software projects in accordance with product development processes. Concept, design & implement Embedded software for the control of RF Generators. Support the definition of new software requirements & functions. Partake in quality assurance, code management & releases. Your Skills & Experience: At least 5 years of professional experience in Software Development with Industrial Production Environments. At least 2 years of experience in the Technical Management of Employees. Strong experience in C, C++, Embedded Software Development & Agile Software Development. Any experience in the area of Control is a strong plus. Ideally experienced in Technical Sub-Project Management and/or Module Ownership. Your Profile: Completed University Degree, ideally in the area of Computer Science, Physics, Electrical Engineering, Microtechnology, Materials Science or similar. Customer & team-oriented with strong communication skills. Fluent in English (spoken & written), German language skills are considered very advantageous.
29/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Head of Embedded Software Development. The role is a permanent position based in Bern Canton & comes with some home office flexibility. Your Role: Oversee the Technical & Personnel Management & further development of a Software & Control Specialist Team containing 6 Engineers. Further develop software development processes in collaboration with R&D Management. Ensure the implementation of software projects in accordance with product development processes. Concept, design & implement Embedded software for the control of RF Generators. Support the definition of new software requirements & functions. Partake in quality assurance, code management & releases. Your Skills & Experience: At least 5 years of professional experience in Software Development with Industrial Production Environments. At least 2 years of experience in the Technical Management of Employees. Strong experience in C, C++, Embedded Software Development & Agile Software Development. Any experience in the area of Control is a strong plus. Ideally experienced in Technical Sub-Project Management and/or Module Ownership. Your Profile: Completed University Degree, ideally in the area of Computer Science, Physics, Electrical Engineering, Microtechnology, Materials Science or similar. Customer & team-oriented with strong communication skills. Fluent in English (spoken & written), German language skills are considered very advantageous.
ENGINEERING MANAGER Up to £75 per hour Plymouth - Hybrid (2-3 days in office) Discovering unparalleled innovation and expertise with a global leader in engineering and technology solutions, looking for an ENGINEERING MANAGER . You will experience top-tier services designed to elevate your projects and exceed expectations working with them. You will be involved in supporting the Design and Safety Manager with day-to-day engineering decisions. Report directly to the Design and Safety Manager and provide support to them, ensuring the delivery of engineering outcomes and the assurance of technical documentation. Skills Required: Managed up to at least 40 engineers. Knowledge of Design and Nuclear Safety. Mechanical/Electrical/Civil experience. Background in Engineering systems and design. Preferred - extensive knowledge of design codes. Join a trusted industry leader committed to driving progress and success on a global scale. Unlock new possibilities for your ventures with their esteemed team in Defence, Nuclear, Marine, and more. *PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role.
29/04/2024
Project-based
ENGINEERING MANAGER Up to £75 per hour Plymouth - Hybrid (2-3 days in office) Discovering unparalleled innovation and expertise with a global leader in engineering and technology solutions, looking for an ENGINEERING MANAGER . You will experience top-tier services designed to elevate your projects and exceed expectations working with them. You will be involved in supporting the Design and Safety Manager with day-to-day engineering decisions. Report directly to the Design and Safety Manager and provide support to them, ensuring the delivery of engineering outcomes and the assurance of technical documentation. Skills Required: Managed up to at least 40 engineers. Knowledge of Design and Nuclear Safety. Mechanical/Electrical/Civil experience. Background in Engineering systems and design. Preferred - extensive knowledge of design codes. Join a trusted industry leader committed to driving progress and success on a global scale. Unlock new possibilities for your ventures with their esteemed team in Defence, Nuclear, Marine, and more. *PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role.
Job Title: Mobile Packet Core & RAN Optimisation Expert Location: Reading & Remote Job Type: Contract Duration: 6 month initially Start Date: 1st May 2024 Pay Rate: TBC Flint UK Technology Services is looking for a Mobile Packet Core & RAN Optimisation Expert to join one of our telecommunications clients. We are looking for someone with a deep understanding of 3G, 4G and 5G packet Core Network architecture & operation as well as good understanding of RAN performance and demonstrable E2E optimization expertise in improving data customer experience via suggesting Network tuning & design changes as well interfacing with the packet core operations team to resolve ongoing systematic issues. Responsibilities: Monitor network performance through RAN and Core network OSS KPIs as well as crowdsource data. Work as Part of the network performance improvement team to deliver analysis for 4G and 5G Network performance through Drive test, network traces, crowd data and KPI analysis to improve the overall network performance focused on these technologies. Propose and pursue the required Packet Data Performance Improvement Design recommendation and changes. Suggest different features & parameter improvements to support the End-to-End Performance objectives related to Packet Data Performance Drive continuous improvements in Network Performance by focusing on Customer experience KPIs. Work in conjunction with team of E2E RAN, IMS Core & Transmission Design teams to ensure appropriate End to End solutions are delivered & ensure Packet Core Network Performance & Customer experience KPI Targets are maintained/exceeded. Skills, Experience and Qualifications Be an expert in Evolved Packet Core Network (MME, Packet Gateway, PCRF,) & preferably IMS Core (CSCF, MTAS - Multimedia Telephony Application Server, SBG, BGF/MRF). Good working knowledge of 3G MPC elements (GGSN, SGSN, DNS) and associated interfaces including key protocols including GTP, Radius, Diameter, RANAP and MAP. Deep Understanding of End-to-End VoLTE Solution and understanding of enriched communication services solutions Must have deep knowledge of Packet Troubleshooting and trace analysis. You will have experience using network statistics, network traces and drive trialling logs to analyse and improve network performance. Tracing tools eg Wireshark, NetScout, Empirix Must have wide experience in troubleshooting HW, SW & Signalling flow problems. Ability to provide technical solutions for network performance & optimisation of 4G and 5G networks. Five or more years of experience in an Established Mobile Network Operator or Vendor/Consultancy with genuine experience in technical projects with LTE/VoLTE/5G technology. Demonstrate the ability to communicate with multiple stakeholders within the organisation and ability to convert business requirements into a technical solution. You will have strong communication and presentation skills including presenting complex technical information in simple terms. BA/BS degree in computer science, telecommunication, electrical engineer or equivalent Excellent working knowledge of MS Office tools including Word, Powerpoint & Excel.
29/04/2024
Project-based
Job Title: Mobile Packet Core & RAN Optimisation Expert Location: Reading & Remote Job Type: Contract Duration: 6 month initially Start Date: 1st May 2024 Pay Rate: TBC Flint UK Technology Services is looking for a Mobile Packet Core & RAN Optimisation Expert to join one of our telecommunications clients. We are looking for someone with a deep understanding of 3G, 4G and 5G packet Core Network architecture & operation as well as good understanding of RAN performance and demonstrable E2E optimization expertise in improving data customer experience via suggesting Network tuning & design changes as well interfacing with the packet core operations team to resolve ongoing systematic issues. Responsibilities: Monitor network performance through RAN and Core network OSS KPIs as well as crowdsource data. Work as Part of the network performance improvement team to deliver analysis for 4G and 5G Network performance through Drive test, network traces, crowd data and KPI analysis to improve the overall network performance focused on these technologies. Propose and pursue the required Packet Data Performance Improvement Design recommendation and changes. Suggest different features & parameter improvements to support the End-to-End Performance objectives related to Packet Data Performance Drive continuous improvements in Network Performance by focusing on Customer experience KPIs. Work in conjunction with team of E2E RAN, IMS Core & Transmission Design teams to ensure appropriate End to End solutions are delivered & ensure Packet Core Network Performance & Customer experience KPI Targets are maintained/exceeded. Skills, Experience and Qualifications Be an expert in Evolved Packet Core Network (MME, Packet Gateway, PCRF,) & preferably IMS Core (CSCF, MTAS - Multimedia Telephony Application Server, SBG, BGF/MRF). Good working knowledge of 3G MPC elements (GGSN, SGSN, DNS) and associated interfaces including key protocols including GTP, Radius, Diameter, RANAP and MAP. Deep Understanding of End-to-End VoLTE Solution and understanding of enriched communication services solutions Must have deep knowledge of Packet Troubleshooting and trace analysis. You will have experience using network statistics, network traces and drive trialling logs to analyse and improve network performance. Tracing tools eg Wireshark, NetScout, Empirix Must have wide experience in troubleshooting HW, SW & Signalling flow problems. Ability to provide technical solutions for network performance & optimisation of 4G and 5G networks. Five or more years of experience in an Established Mobile Network Operator or Vendor/Consultancy with genuine experience in technical projects with LTE/VoLTE/5G technology. Demonstrate the ability to communicate with multiple stakeholders within the organisation and ability to convert business requirements into a technical solution. You will have strong communication and presentation skills including presenting complex technical information in simple terms. BA/BS degree in computer science, telecommunication, electrical engineer or equivalent Excellent working knowledge of MS Office tools including Word, Powerpoint & Excel.
*Hybrid, 3 days onsite, 2 days remote* *We are unable to sponsor as this is a permanent Full time role* A prestigious company is looking for a Sr. .NET Product Engineer. This engineer will be doing full stack custom application development. They will work with .Net, C#, MVC, Javascript, jQuery, HTML 5, etc. Responsibilities: The Sr .NET Product Engineer I is responsible for delivering custom business solutions using the Microsoft technology stack. The individual will drive the design and development of user interfaces, business objectives and overall infrastructure. Analyze, design, configure, develop and implement intermediate-level solutions to meet business needs and objectives. Provide Level 3 support. Investigates operational or systematic problems and provides resolution using intermediate analytical skills and tools as necessary. Prepare project proposals and develop project plans. May lead small projects. Maintain up-to-date awareness of current and future directions of business industry and associated technologies. Investigate and document present procedures as liaison with user departments. May develop and maintain application security, design and documentation according to legal compliance requirements. Qualifications & Requirements A Bachelor's Degree is preferred in mechanical, computer, or electrical engineering discipline. 8 plus years of software development experience with 6 plus years of web-based software development in .NET technologies (C#, .NET Framework, .NET Core, Docker, MVC, SQL Server). Prior experience developing MSOffice add-Ins in Word, Outlook and Excel Prior experience with ASP.NET MVC (versions 4 and up), .NET Core, WCF, Restful services, JavaScript, jQuery, HTML5/CSS3, React, responsive design, and Dependency Injection frameworks are desired. Experience with ORM with different tools such as Entity Framework and LINQ. Experience working with container-based solutions Experience with continuous integration with Azure DevOps, Git (or similar). Should have strong understanding of SOA, TDD, SOLID principles, and systems architecture concepts. Must be familiar with agile or other iterative development methodologies. Technologies/Software Must understand Microsoft Windows Operating system architecture Must understand Microsoft Windows Office System Ability to participate in all aspects of application SDLC including Agile methodologies Must have experience the Microsoft Visual Studio and ADO Must participate in daily team scrums and code reviews Must understand Microsoft SQL Server Microsoft Visual Studio 2019/2021 Azure DevOps .NET Framework, .NET Core, Rest API services, WCF Services C#, VB.NET, JQuery, JavaScript, Typescript, React, LINQ, HTML5, CSS3, Bootstrap SQL Server, PostgreSQL Docker MVC Framework Entity Framework Knowledge of SOA (Service Oriented Architecture) and N-Tier Architecture.
26/04/2024
Full time
*Hybrid, 3 days onsite, 2 days remote* *We are unable to sponsor as this is a permanent Full time role* A prestigious company is looking for a Sr. .NET Product Engineer. This engineer will be doing full stack custom application development. They will work with .Net, C#, MVC, Javascript, jQuery, HTML 5, etc. Responsibilities: The Sr .NET Product Engineer I is responsible for delivering custom business solutions using the Microsoft technology stack. The individual will drive the design and development of user interfaces, business objectives and overall infrastructure. Analyze, design, configure, develop and implement intermediate-level solutions to meet business needs and objectives. Provide Level 3 support. Investigates operational or systematic problems and provides resolution using intermediate analytical skills and tools as necessary. Prepare project proposals and develop project plans. May lead small projects. Maintain up-to-date awareness of current and future directions of business industry and associated technologies. Investigate and document present procedures as liaison with user departments. May develop and maintain application security, design and documentation according to legal compliance requirements. Qualifications & Requirements A Bachelor's Degree is preferred in mechanical, computer, or electrical engineering discipline. 8 plus years of software development experience with 6 plus years of web-based software development in .NET technologies (C#, .NET Framework, .NET Core, Docker, MVC, SQL Server). Prior experience developing MSOffice add-Ins in Word, Outlook and Excel Prior experience with ASP.NET MVC (versions 4 and up), .NET Core, WCF, Restful services, JavaScript, jQuery, HTML5/CSS3, React, responsive design, and Dependency Injection frameworks are desired. Experience with ORM with different tools such as Entity Framework and LINQ. Experience working with container-based solutions Experience with continuous integration with Azure DevOps, Git (or similar). Should have strong understanding of SOA, TDD, SOLID principles, and systems architecture concepts. Must be familiar with agile or other iterative development methodologies. Technologies/Software Must understand Microsoft Windows Operating system architecture Must understand Microsoft Windows Office System Ability to participate in all aspects of application SDLC including Agile methodologies Must have experience the Microsoft Visual Studio and ADO Must participate in daily team scrums and code reviews Must understand Microsoft SQL Server Microsoft Visual Studio 2019/2021 Azure DevOps .NET Framework, .NET Core, Rest API services, WCF Services C#, VB.NET, JQuery, JavaScript, Typescript, React, LINQ, HTML5, CSS3, Bootstrap SQL Server, PostgreSQL Docker MVC Framework Entity Framework Knowledge of SOA (Service Oriented Architecture) and N-Tier Architecture.
Electrical Hardware Engineer Staffordshire (Hybrid) Up to £65,000 + benefits We have partnered with an organisation who specialises in digital transformations and operational technology who have been ahead of the game with their advanced systems for years. The business who are going from strength to strength, are looking to hire a Hardware Engineer to be part of the business's world class team ahead of their expanding project opportunities. The Hardware Engineer will be primary based in the office in Stafford and will be designing hardware systems using various hardware components for a key focus on MCCs, PLCs, Switchgear and Drives & Controls. Essential requirements for the Electrical Hardware Engineer Minimum of 5 years experience in a similar role with qualifications in this field Strong understanding of designing electrical panels containing PLC's and LV distribution systems. Design of containment systems and electrical cabling Proven experience of AutoCAD Electrical, Microsoft office products. Working with production to see the design through to completion. Mentoring experience with junior engineer Understanding of IEC BS EN 61439-1,Low-voltage switchgear and control gear assemblies Ability to develop technical solutions to meet customer and project expectations Working knowledge of BS7671 IEE 18th Edition Wiring Regulations Benefits of the Electrical Hardware Engineer 25 days holiday plus bank holidays Tailored pension planning scheme Life assurance policy and private health care Support in achieving professional engineer status (IEng, CEng) and professional memberships fees covered. To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Storm Robertson, by exploring the VIQU IT Recruitment website. If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply).
26/04/2024
Full time
Electrical Hardware Engineer Staffordshire (Hybrid) Up to £65,000 + benefits We have partnered with an organisation who specialises in digital transformations and operational technology who have been ahead of the game with their advanced systems for years. The business who are going from strength to strength, are looking to hire a Hardware Engineer to be part of the business's world class team ahead of their expanding project opportunities. The Hardware Engineer will be primary based in the office in Stafford and will be designing hardware systems using various hardware components for a key focus on MCCs, PLCs, Switchgear and Drives & Controls. Essential requirements for the Electrical Hardware Engineer Minimum of 5 years experience in a similar role with qualifications in this field Strong understanding of designing electrical panels containing PLC's and LV distribution systems. Design of containment systems and electrical cabling Proven experience of AutoCAD Electrical, Microsoft office products. Working with production to see the design through to completion. Mentoring experience with junior engineer Understanding of IEC BS EN 61439-1,Low-voltage switchgear and control gear assemblies Ability to develop technical solutions to meet customer and project expectations Working knowledge of BS7671 IEE 18th Edition Wiring Regulations Benefits of the Electrical Hardware Engineer 25 days holiday plus bank holidays Tailored pension planning scheme Life assurance policy and private health care Support in achieving professional engineer status (IEng, CEng) and professional memberships fees covered. To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Storm Robertson, by exploring the VIQU IT Recruitment website. If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply).
Introduction: Our client stands as an approved Maintenance Repair Organisation accredited by both EASA and UK CAA, entrusted with delivering Line & Base Maintenance services for a range of aircraft including the B737 NG, B737 Max, B777, and B787. As part of their ongoing growth, we are seeking B1 Licensed Aircraft Engineers to join our esteemed organisation. Candidates should hold a valid UK CAA Category B1 Part-66 Licence, with type ratings on B737 NG, B777, and/or B787 aircraft. Responsibilities: The B1 Licensed Aircraft Engineer will take charge of supervising Mechanics and overseeing inspection and certification of scheduled maintenance tasks, defect rectification, modifications, structural repairs, and functional tests across Airframe, Engine, and Electrical systems. They will collaborate closely with the Aircraft Check Manager to ensure the completion of daily workload tasks and adherence to the production plan. These positions will be under the guidance of the Maintenance Manager - Production and are stationed at our London Gatwick Hangar facility, offering various shift patterns for flexibility. Key Responsibilities: Supervising Mechanics performing Base Maintenance on customer aircraft. Inspecting and certifying scheduled maintenance tasks, defect rectification, modifications, structural repairs, and functional tests on Airframe, Engine, and Electrical systems. Completing all assigned work promptly to minimise aircraft downtime. Ensuring accurate completion of aircraft technical log books, maintenance documentation, job cards, work packages, and zonal handovers within designated timelines. Maintaining high standards of cleanliness and organisation within assigned work areas. Adhering to regulatory requirements, company processes, and procedures. Fostering a culture of safety and reporting all incidents and occurrences in the Boeing Safety Management System. Highlighting technical issues, discrepancies, or other concerns to the Aircraft Check Manager. Actively contributing to continuous improvement initiatives and lean principles. Assisting the management team in the day-to-day operations of the London Gatwick Operation. Undertaking additional duties as required, including potential work away from London Gatwick. Required Qualifications and Experience: Hold a valid UK CAA Category B1 Part-66 Licence. Type rating on one or more of the following aircraft - B737 NG, B777, or B787. Minimum of 1 year exercising certification privileges in a Line or Base Maintenance environment. Demonstrate 6 months recent experience on type and ability to maintain appropriate company authorisations specific to the role. Thorough understanding of Part-145 regulations. Previous experience using AMOS or other Maintenance Management Systems. Strong communication skills and effective problem-solving abilities. Flexibility to adjust working hours to meet operational demands. Team-oriented mindset with a commitment to exceeding internal and external customer expectations. Proficiency in using Microsoft Office applications and willingness to learn in-house systems. Eligibility to hold a London Gatwick Airport airside pass. Candidates must have the right to live and work in the United Kingdom. Work Authorisation: This position is open to locally hired candidates in the United Kingdom who possess current legal authorisation to work in the country. Sadly, our client will not pursue immigration or labour sponsorship for applicants.
26/04/2024
Project-based
Introduction: Our client stands as an approved Maintenance Repair Organisation accredited by both EASA and UK CAA, entrusted with delivering Line & Base Maintenance services for a range of aircraft including the B737 NG, B737 Max, B777, and B787. As part of their ongoing growth, we are seeking B1 Licensed Aircraft Engineers to join our esteemed organisation. Candidates should hold a valid UK CAA Category B1 Part-66 Licence, with type ratings on B737 NG, B777, and/or B787 aircraft. Responsibilities: The B1 Licensed Aircraft Engineer will take charge of supervising Mechanics and overseeing inspection and certification of scheduled maintenance tasks, defect rectification, modifications, structural repairs, and functional tests across Airframe, Engine, and Electrical systems. They will collaborate closely with the Aircraft Check Manager to ensure the completion of daily workload tasks and adherence to the production plan. These positions will be under the guidance of the Maintenance Manager - Production and are stationed at our London Gatwick Hangar facility, offering various shift patterns for flexibility. Key Responsibilities: Supervising Mechanics performing Base Maintenance on customer aircraft. Inspecting and certifying scheduled maintenance tasks, defect rectification, modifications, structural repairs, and functional tests on Airframe, Engine, and Electrical systems. Completing all assigned work promptly to minimise aircraft downtime. Ensuring accurate completion of aircraft technical log books, maintenance documentation, job cards, work packages, and zonal handovers within designated timelines. Maintaining high standards of cleanliness and organisation within assigned work areas. Adhering to regulatory requirements, company processes, and procedures. Fostering a culture of safety and reporting all incidents and occurrences in the Boeing Safety Management System. Highlighting technical issues, discrepancies, or other concerns to the Aircraft Check Manager. Actively contributing to continuous improvement initiatives and lean principles. Assisting the management team in the day-to-day operations of the London Gatwick Operation. Undertaking additional duties as required, including potential work away from London Gatwick. Required Qualifications and Experience: Hold a valid UK CAA Category B1 Part-66 Licence. Type rating on one or more of the following aircraft - B737 NG, B777, or B787. Minimum of 1 year exercising certification privileges in a Line or Base Maintenance environment. Demonstrate 6 months recent experience on type and ability to maintain appropriate company authorisations specific to the role. Thorough understanding of Part-145 regulations. Previous experience using AMOS or other Maintenance Management Systems. Strong communication skills and effective problem-solving abilities. Flexibility to adjust working hours to meet operational demands. Team-oriented mindset with a commitment to exceeding internal and external customer expectations. Proficiency in using Microsoft Office applications and willingness to learn in-house systems. Eligibility to hold a London Gatwick Airport airside pass. Candidates must have the right to live and work in the United Kingdom. Work Authorisation: This position is open to locally hired candidates in the United Kingdom who possess current legal authorisation to work in the country. Sadly, our client will not pursue immigration or labour sponsorship for applicants.
PRINCIPAL EC&I ELECTRICAL ENGINEER Up to £68 per hour. Warrington & Cumbria - Hybrid The company that specializes in providing nuclear engineering and technical services globally is currently looking for PRINCIPAL EC&I ELECTRICAL ENGINEER . With a focus on innovation and safety, it offers a range of solutions for nuclear power plants and facilities. Through collaboration with industry partners, it drives advancements in nuclear technology and safety practices. The engineer will be an expert in diverse engineering drawings, including Block Cable and Single Line Diagrams. You will be involved in Meticulous documentation, creating precise Termination Drawings and detailed instrument datasheets. Holistic capabilities in Electrical Power Distribution, Control Systems, and Instrumentation Design for effective contribution to multidisciplinary projects. Skills Required: EC&I Electrical designing experience. Electrical Power Distribution Design. Knowledge of 61508 (electrical safety mechs). Create control & instrumentation systems. If you are looking to collaborate with industry partners and continue to drive advancements in nuclear technology and safety practices, then this role is for you. * PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role.
26/04/2024
Project-based
PRINCIPAL EC&I ELECTRICAL ENGINEER Up to £68 per hour. Warrington & Cumbria - Hybrid The company that specializes in providing nuclear engineering and technical services globally is currently looking for PRINCIPAL EC&I ELECTRICAL ENGINEER . With a focus on innovation and safety, it offers a range of solutions for nuclear power plants and facilities. Through collaboration with industry partners, it drives advancements in nuclear technology and safety practices. The engineer will be an expert in diverse engineering drawings, including Block Cable and Single Line Diagrams. You will be involved in Meticulous documentation, creating precise Termination Drawings and detailed instrument datasheets. Holistic capabilities in Electrical Power Distribution, Control Systems, and Instrumentation Design for effective contribution to multidisciplinary projects. Skills Required: EC&I Electrical designing experience. Electrical Power Distribution Design. Knowledge of 61508 (electrical safety mechs). Create control & instrumentation systems. If you are looking to collaborate with industry partners and continue to drive advancements in nuclear technology and safety practices, then this role is for you. * PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role.
Electrical Design Engineer Location: Derby Salary: £40,000 to £55,000 plus bonus & benefits Are you an Electrical Design Engineer who enjoys the cut and thrust of working on a varied landscape? Have you worked in regulated industries? I am working with a well-regarded consultancy who have over 25 years in industry, working with the likes of Dyson, Rolls Royce and similar corporations. This role with give an Electrical Design Engineer the opportunity to not only work on specific Electrical design but be exposed to a multidisciplinary Design Team seeing all mechanical and electronic elements to the projects. They boast a strong order book and this role is an expansion to the Design Team, if you have 3 years or more in industry, we want to hear from you. In this role you will be involved from the start of the project right through to inception, working closely with production and testing. What our client needs: Educated to HNC/HND or Degree in Electrical Engineering Experience within industry of over 3 years in Electrical Design Worked ideally in a consultancy or able to demonstrate multi-project experience Solidworks Electrical or E Plan design packages used PLC knowledge is a bonus and not essential What's in it for you? An opportunity to work with a plethora of household names in Automotive, Aerospace, Consumer Product and many more Flexible Start and Finish times Private Medical Cover Competitive Salary and Company Pension Contributions Please apply with an up to date CV or contact me
26/04/2024
Full time
Electrical Design Engineer Location: Derby Salary: £40,000 to £55,000 plus bonus & benefits Are you an Electrical Design Engineer who enjoys the cut and thrust of working on a varied landscape? Have you worked in regulated industries? I am working with a well-regarded consultancy who have over 25 years in industry, working with the likes of Dyson, Rolls Royce and similar corporations. This role with give an Electrical Design Engineer the opportunity to not only work on specific Electrical design but be exposed to a multidisciplinary Design Team seeing all mechanical and electronic elements to the projects. They boast a strong order book and this role is an expansion to the Design Team, if you have 3 years or more in industry, we want to hear from you. In this role you will be involved from the start of the project right through to inception, working closely with production and testing. What our client needs: Educated to HNC/HND or Degree in Electrical Engineering Experience within industry of over 3 years in Electrical Design Worked ideally in a consultancy or able to demonstrate multi-project experience Solidworks Electrical or E Plan design packages used PLC knowledge is a bonus and not essential What's in it for you? An opportunity to work with a plethora of household names in Automotive, Aerospace, Consumer Product and many more Flexible Start and Finish times Private Medical Cover Competitive Salary and Company Pension Contributions Please apply with an up to date CV or contact me
Position Available : Principal Engineer - Building Services Engineering Location : Stevenage - Dynamic Working Hours Salary : Up to £60,000 + Paid Overtime, Company Bonus & Very Good Pension Package Experience needed : Experience in building services design and mechanical engineering in particular. Working within a facilities or site management team would be the ideal background for this kind of role. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Principal Engineer - Building Services Engineering. In this role you will support the team in: Preparing scope of works and performance specifications for planned maintenance. Assessing mechanical and electrical asset condition Managing 5-year maintenance budgets for planned maintenance works. Carrying out ongoing and detailed assessments of the condition of Mechanical, Electrical and Plumbing services What we need from you: A strong background in building services design and in particular Mechanical engineering, engineering consultancy and the design and specification of Mechanical installations. Familiar with the asset management principles of ISO550001. Willingness to act as Senior Authorising Person with responsibility for the Mechanical Safety Rules. CEng and member of CIBSE would be preferred but not essential. If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
26/04/2024
Full time
Position Available : Principal Engineer - Building Services Engineering Location : Stevenage - Dynamic Working Hours Salary : Up to £60,000 + Paid Overtime, Company Bonus & Very Good Pension Package Experience needed : Experience in building services design and mechanical engineering in particular. Working within a facilities or site management team would be the ideal background for this kind of role. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Principal Engineer - Building Services Engineering. In this role you will support the team in: Preparing scope of works and performance specifications for planned maintenance. Assessing mechanical and electrical asset condition Managing 5-year maintenance budgets for planned maintenance works. Carrying out ongoing and detailed assessments of the condition of Mechanical, Electrical and Plumbing services What we need from you: A strong background in building services design and in particular Mechanical engineering, engineering consultancy and the design and specification of Mechanical installations. Familiar with the asset management principles of ISO550001. Willingness to act as Senior Authorising Person with responsibility for the Mechanical Safety Rules. CEng and member of CIBSE would be preferred but not essential. If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
A global medical device company are looking for an Electrical Engineer to join their Engineering team on a contract basis. Your role will be to design and build test systems. The role will include wide breadth of activities within. From understanding product stand point to testing the product with the sub assembly to building an automated production system. Working knowledge of piezos is essential. Essential skills: Broad understanding of electrical or electronic systems Understanding of components and sensors Working knowledge piezos Adaptability Desirable skills: Medical device or other regulated industry experience The start date is for ASAP. The initial contract length is for 6 months (with extension options after). The role is based in County Tipperary and will require 3 days onsite per week, the rest of the time you can work remotely. The rate is €60 per hour, depending on experience, if you have any expenses please let me know and I can factor that into the rate for you. If you are interested in the role please send me your latest CV and I will call you to discuss the further details. Please visit our website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Real Staffing, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy| Registered office | London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
26/04/2024
Project-based
A global medical device company are looking for an Electrical Engineer to join their Engineering team on a contract basis. Your role will be to design and build test systems. The role will include wide breadth of activities within. From understanding product stand point to testing the product with the sub assembly to building an automated production system. Working knowledge of piezos is essential. Essential skills: Broad understanding of electrical or electronic systems Understanding of components and sensors Working knowledge piezos Adaptability Desirable skills: Medical device or other regulated industry experience The start date is for ASAP. The initial contract length is for 6 months (with extension options after). The role is based in County Tipperary and will require 3 days onsite per week, the rest of the time you can work remotely. The rate is €60 per hour, depending on experience, if you have any expenses please let me know and I can factor that into the rate for you. If you are interested in the role please send me your latest CV and I will call you to discuss the further details. Please visit our website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Real Staffing, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy| Registered office | London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
Senior Security Systems Design Engineer I am looking to hire an experienced (3-5 Years) Senior Security Systems Design Engineer on behalf of a prestigious client of mine, on a permanent basis. Our clients are looking for a motivated individual who will have experience of, and the continued desire to, see their designs through from Design to Construction, Commissioning and handover etc. Candidates wishing to apply for this position will be heavily experienced in the Technical Design Space (Electrical and Mechanical Requirements) and have the capabilities, of successfully grasping the fundamentals of a new development ie Hotel, Stadium, Airport - It goes without saying, it is imperative that the successful candidate has Practical experience! To be considered for this position you will be well versed with the RIBA process and the following Softwares ; AutoCAD, REVIT, Bluebeam Revu . You will be responsible for and able to demonstrate (not limited to), Project Planning, client briefing, developing design, task quality control procedures, resource planning and working within budgets. It is essential that you will have previously designed some or all of the following; Video Surveillance, Access Control, Intruder detection, Duress, Intercom, Control Rooms, Integrated Security Management Platforms, Gates/Barriers, Turnstiles, Car Parking Management, Key Management or Drone detection and will have previously monitored both on and off-site construction works and testing of electronic security systems. You will be a sleeves-rolled-up individual, with excellent attention to detail, who is able to deliver in various Architectural Projects. Salary: Up to £67,000 per annum Location: On site in London 3 days a week, the remainder working remotely. (Probation period fully on site)
25/04/2024
Full time
Senior Security Systems Design Engineer I am looking to hire an experienced (3-5 Years) Senior Security Systems Design Engineer on behalf of a prestigious client of mine, on a permanent basis. Our clients are looking for a motivated individual who will have experience of, and the continued desire to, see their designs through from Design to Construction, Commissioning and handover etc. Candidates wishing to apply for this position will be heavily experienced in the Technical Design Space (Electrical and Mechanical Requirements) and have the capabilities, of successfully grasping the fundamentals of a new development ie Hotel, Stadium, Airport - It goes without saying, it is imperative that the successful candidate has Practical experience! To be considered for this position you will be well versed with the RIBA process and the following Softwares ; AutoCAD, REVIT, Bluebeam Revu . You will be responsible for and able to demonstrate (not limited to), Project Planning, client briefing, developing design, task quality control procedures, resource planning and working within budgets. It is essential that you will have previously designed some or all of the following; Video Surveillance, Access Control, Intruder detection, Duress, Intercom, Control Rooms, Integrated Security Management Platforms, Gates/Barriers, Turnstiles, Car Parking Management, Key Management or Drone detection and will have previously monitored both on and off-site construction works and testing of electronic security systems. You will be a sleeves-rolled-up individual, with excellent attention to detail, who is able to deliver in various Architectural Projects. Salary: Up to £67,000 per annum Location: On site in London 3 days a week, the remainder working remotely. (Probation period fully on site)
Infoplus Technologies UK Ltd
Peterborough, Cambridgeshire
Role: Through this role, the successful candidate will have an excellent opportunity be involved in the design and development of controls and software for advanced diesel engine controls and/or hybrid systems controls. Responsibilities: Work with process partner teams (primarily Industrial Power Systems Division) to gather and develop requirements for the advanced diesel engines and hybrid power systems being developed for future, more sustainable, low carbon power systems. Create control algorithms/software models using Matlab, Simulink and Stateflow to meet diesel engine and/or hybrid power system software requirements. Conduct control system tuning/calibration activities on test bench and/or on test bed/machine to achieve desired system performance. Conduct sub-system FMEAs, documenting potential failure modes, identifying, and completing design and validation actions and managing subsequent updates. Plan and execute verification and validation testing for electronics/control system software in SiL, HiL or on-test bed or development machines. Troubleshoot and resolve electronics/control system issues encountered during engine or power system running. Competencies: Essential: Strong technical background (HNC or technical degree preferred in mechanical or electronic, electrical, control systems or automotive engineering) with 10+ Years of experience. Essential experience is working previously with Diesel Engines and having the Diesel Engine knowledge. Matlab, Simulink and Stateflow experience is essential, must've used it to create Control Algorithms. Significant, demonstrable experience of using Mathworks tools (Matlab, Simulink and Stateflow) for model-based software design and development to create Embedded software. This should have been gained in a diesel engine or hybrid power systems development environment. Ability to translate and develop customer requirements and objectives into production-ready software models. Knowledge of software FMEA and validation plan creation. Excellent communications skills & Teamwork Desirable: Good understanding of the off-highway industry, ideally gained through direct involvement in the development of powertrain, hydraulics, or other control systems. Experience of Caterpillar control software processes and tools. Experience of HiL test equipment and the ability to programme automated tests. Knowledge of software version control systems, ideally GiT or Clearcase. Knowledge of/prior experience of developing software to meet functional safety requirements.
25/04/2024
Role: Through this role, the successful candidate will have an excellent opportunity be involved in the design and development of controls and software for advanced diesel engine controls and/or hybrid systems controls. Responsibilities: Work with process partner teams (primarily Industrial Power Systems Division) to gather and develop requirements for the advanced diesel engines and hybrid power systems being developed for future, more sustainable, low carbon power systems. Create control algorithms/software models using Matlab, Simulink and Stateflow to meet diesel engine and/or hybrid power system software requirements. Conduct control system tuning/calibration activities on test bench and/or on test bed/machine to achieve desired system performance. Conduct sub-system FMEAs, documenting potential failure modes, identifying, and completing design and validation actions and managing subsequent updates. Plan and execute verification and validation testing for electronics/control system software in SiL, HiL or on-test bed or development machines. Troubleshoot and resolve electronics/control system issues encountered during engine or power system running. Competencies: Essential: Strong technical background (HNC or technical degree preferred in mechanical or electronic, electrical, control systems or automotive engineering) with 10+ Years of experience. Essential experience is working previously with Diesel Engines and having the Diesel Engine knowledge. Matlab, Simulink and Stateflow experience is essential, must've used it to create Control Algorithms. Significant, demonstrable experience of using Mathworks tools (Matlab, Simulink and Stateflow) for model-based software design and development to create Embedded software. This should have been gained in a diesel engine or hybrid power systems development environment. Ability to translate and develop customer requirements and objectives into production-ready software models. Knowledge of software FMEA and validation plan creation. Excellent communications skills & Teamwork Desirable: Good understanding of the off-highway industry, ideally gained through direct involvement in the development of powertrain, hydraulics, or other control systems. Experience of Caterpillar control software processes and tools. Experience of HiL test equipment and the ability to programme automated tests. Knowledge of software version control systems, ideally GiT or Clearcase. Knowledge of/prior experience of developing software to meet functional safety requirements.
Technical Lead - Electrical Mechanical Pipeline (MEP) Engineering My well established multinational technology company is urgently looking for a Technical Lead to join their MEP Engineering team on a 12-18 month contract. You will play a key role in delivery of a large data centre in the UK for a global IT search engine and contribute to a large scale project as a whole providing technical leadership for MEP issues Overview of Role Provide technical expertise (electrical and mechanical) and leadership to ensure the successful installation of our clients modules at the customer's site. Coordinates and gives instructions to the client's subcontracting teams on site. Knows the assembly plans for the different modules to be assembled. Answers questions from the client's subcontractors = general contractor (engineers, fitters, assemblers) and the client (DCS engineers). Key Tasks Leadership Technique - Provide technical direction to the General Contractor. - Guide the General Contractor's assembly teams in the event of a need or problem. Technical Problem Solving: - Identify and resolve technical problems encountered by the team. - Provide technical support to resolve critical incidents. Formation: Train DCS engineers and operators on the use of structures Collaboration: - Work closely with other functional teams (design, QA,operations, etc.) to guarantee the harmonious integration of the different modules. Essential Skills 5 -10 years + Electrical Mechanical Engineering experience Experience of working with large IT data centres Worked as engineer as Technical Leader on engineering team You already have experience in project management/installation of piping equipment, metal constructions and electrical equipment Excellent communication skills, both written and oral. Strong organisational skills. Desirable French Speaking Full training will be given on the exact modules you will be working on by our client. This training will take place in Belgium at our clients site and will be full expensed. This could last up to 3 months, Once trained you will then be working with a project team in the UK If interested then get in touch ASAP toi find pout more about this exciting opportunity ads I have interview slots ready to fill Randstad Technologies is acting as an Employment Business in relation to this vacancy.
25/04/2024
Project-based
Technical Lead - Electrical Mechanical Pipeline (MEP) Engineering My well established multinational technology company is urgently looking for a Technical Lead to join their MEP Engineering team on a 12-18 month contract. You will play a key role in delivery of a large data centre in the UK for a global IT search engine and contribute to a large scale project as a whole providing technical leadership for MEP issues Overview of Role Provide technical expertise (electrical and mechanical) and leadership to ensure the successful installation of our clients modules at the customer's site. Coordinates and gives instructions to the client's subcontracting teams on site. Knows the assembly plans for the different modules to be assembled. Answers questions from the client's subcontractors = general contractor (engineers, fitters, assemblers) and the client (DCS engineers). Key Tasks Leadership Technique - Provide technical direction to the General Contractor. - Guide the General Contractor's assembly teams in the event of a need or problem. Technical Problem Solving: - Identify and resolve technical problems encountered by the team. - Provide technical support to resolve critical incidents. Formation: Train DCS engineers and operators on the use of structures Collaboration: - Work closely with other functional teams (design, QA,operations, etc.) to guarantee the harmonious integration of the different modules. Essential Skills 5 -10 years + Electrical Mechanical Engineering experience Experience of working with large IT data centres Worked as engineer as Technical Leader on engineering team You already have experience in project management/installation of piping equipment, metal constructions and electrical equipment Excellent communication skills, both written and oral. Strong organisational skills. Desirable French Speaking Full training will be given on the exact modules you will be working on by our client. This training will take place in Belgium at our clients site and will be full expensed. This could last up to 3 months, Once trained you will then be working with a project team in the UK If interested then get in touch ASAP toi find pout more about this exciting opportunity ads I have interview slots ready to fill Randstad Technologies is acting as an Employment Business in relation to this vacancy.
Inspection & Test Engineer - Staffordshire - up to £35,000 I am currently working with one of the UK's leading technology and digital transformation companies, who have ben operating for over 50 years. We are recruiting for a talented and driven Wire person to join the growing Electrical Testing team, who would be responsible for ensuring that products or processes meet specified standards and requirements. This role involves developing and implementing quality control procedures, including meticulous point-to-point testing, to verify the continuity and correctness of individual connections in electrical circuits. They conduct inspections and tests, identify defects or deviations from standards, and review/check technical specifications to ensure adherence to design requirements. The successful candidate will be collaborating with various teams, Quality Assurance Engineers address and resolve quality issues, contributing to the continuous improvement of processes and systems. Requirements of the Test Engineer role: Nationally recognized technical qualification in Electrical/Electronic discipline (Examples: HNC/HND, 17th Edition C&G2382 & Inspection & Test, completed modern apprenticeship) Full driving license and car Eligibility for SC Clearance Reading and interpreting circuit diagrams, assembly prints, wiring schedules, and parts lists. Ability to conduct point-to-point testing, interpret circuit diagrams, and review technical specifications. Strong documentation skills to maintain accurate records of inspections, tests, and deviations. Ability to review and check technical specifications to ensure alignment with design requirements. About/Benefits of the Test Engineer role: The two-stage interview process is conducted over MS Teams, with working hours from 8 am to 5 pm (half day on Fridays). The position includes benefits such as 25 days holiday, life assurance, private health care, and a strong pension plan. To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Erin-Mae McDonagh , by exploring the VIQU IT Recruitment website . If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply).
25/04/2024
Full time
Inspection & Test Engineer - Staffordshire - up to £35,000 I am currently working with one of the UK's leading technology and digital transformation companies, who have ben operating for over 50 years. We are recruiting for a talented and driven Wire person to join the growing Electrical Testing team, who would be responsible for ensuring that products or processes meet specified standards and requirements. This role involves developing and implementing quality control procedures, including meticulous point-to-point testing, to verify the continuity and correctness of individual connections in electrical circuits. They conduct inspections and tests, identify defects or deviations from standards, and review/check technical specifications to ensure adherence to design requirements. The successful candidate will be collaborating with various teams, Quality Assurance Engineers address and resolve quality issues, contributing to the continuous improvement of processes and systems. Requirements of the Test Engineer role: Nationally recognized technical qualification in Electrical/Electronic discipline (Examples: HNC/HND, 17th Edition C&G2382 & Inspection & Test, completed modern apprenticeship) Full driving license and car Eligibility for SC Clearance Reading and interpreting circuit diagrams, assembly prints, wiring schedules, and parts lists. Ability to conduct point-to-point testing, interpret circuit diagrams, and review technical specifications. Strong documentation skills to maintain accurate records of inspections, tests, and deviations. Ability to review and check technical specifications to ensure alignment with design requirements. About/Benefits of the Test Engineer role: The two-stage interview process is conducted over MS Teams, with working hours from 8 am to 5 pm (half day on Fridays). The position includes benefits such as 25 days holiday, life assurance, private health care, and a strong pension plan. To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Erin-Mae McDonagh , by exploring the VIQU IT Recruitment website . If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply).
Technical Operator (Water Industry) Hours: 40 Hours per week, plus standby duty Location: Hampton Loade Bridgenorth Saray: £31,600 per annum About Us: At South Staffs Water, we deliver clean and reliable water supplies to around 1.7 million customers within the South Staffs and Cambridge regions. As a water only Company, providing clean, healthy water 24 hours a day, 365 days a year is at the very heart of what we do and that's where you come in. The role: As part of the role, you will work closely with a range of internal and external contacts on a daily basis. You will be responsible for maintaining the control and operation of strategic source water sites and will be required to manage your time effectively to complete a demanding schedule of plant maintenance activities. • Conduct basic electrical tasks. • Knowledge and application of technical skills to operate, maintain, improve, and repair equipment. • Maintain control and oversee the operation of strategic source water sites. • Effectively manage your time to complete a demanding schedule of plant maintenance activities. • Demonstrate an understanding of the principles of site design and operation. • Utilise appropriate safety and environmental procedures for people, processes, materials, products, and equipment to ensure a safe working environment for the entire team. • Ensure that all aspects of quality within the area of responsibility adhere to local quality procedures. • Attend to site and equipment breakdowns to safely restore plant supply. What you'll need • HNC level (or equivalent) in Electrical Engineering or alternatively equivalent relevant experience is desirable but not essential. • An electrical background in the utilities or similar industry is essential to the role; a Water industry background is desirable. • Computer literate (Excel, Word, Outlook) • Full driving licence • Health and safety are a priority for all members of the production team. You will have experience of reviewing risk assessments and are always confident to challenge and enforce safe working practices. Essential training will be provided which will help you gain the confidence within the operational area. What you'll get in return • Competitive Salary of £31,600 per annum • Company pension with employer contribution. • Store discount for personal shopping needs. • 24-hour helpline providing free and confidential advice to you and your family on financial, legal, marital and health.
25/04/2024
Full time
Technical Operator (Water Industry) Hours: 40 Hours per week, plus standby duty Location: Hampton Loade Bridgenorth Saray: £31,600 per annum About Us: At South Staffs Water, we deliver clean and reliable water supplies to around 1.7 million customers within the South Staffs and Cambridge regions. As a water only Company, providing clean, healthy water 24 hours a day, 365 days a year is at the very heart of what we do and that's where you come in. The role: As part of the role, you will work closely with a range of internal and external contacts on a daily basis. You will be responsible for maintaining the control and operation of strategic source water sites and will be required to manage your time effectively to complete a demanding schedule of plant maintenance activities. • Conduct basic electrical tasks. • Knowledge and application of technical skills to operate, maintain, improve, and repair equipment. • Maintain control and oversee the operation of strategic source water sites. • Effectively manage your time to complete a demanding schedule of plant maintenance activities. • Demonstrate an understanding of the principles of site design and operation. • Utilise appropriate safety and environmental procedures for people, processes, materials, products, and equipment to ensure a safe working environment for the entire team. • Ensure that all aspects of quality within the area of responsibility adhere to local quality procedures. • Attend to site and equipment breakdowns to safely restore plant supply. What you'll need • HNC level (or equivalent) in Electrical Engineering or alternatively equivalent relevant experience is desirable but not essential. • An electrical background in the utilities or similar industry is essential to the role; a Water industry background is desirable. • Computer literate (Excel, Word, Outlook) • Full driving licence • Health and safety are a priority for all members of the production team. You will have experience of reviewing risk assessments and are always confident to challenge and enforce safe working practices. Essential training will be provided which will help you gain the confidence within the operational area. What you'll get in return • Competitive Salary of £31,600 per annum • Company pension with employer contribution. • Store discount for personal shopping needs. • 24-hour helpline providing free and confidential advice to you and your family on financial, legal, marital and health.