We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
06/05/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
We are currently looking on behalf of one of our important clients for an Electronic Hardware Design Engineer. The role is a permanent position based Bern Canton & comes with some home office allowance. Your Role: Develop Electronics Solutions for customers, projects & a new product portfolio. Design, implement, document & verify Electronic HW for new & existing control systems. Work on international projects & participate in risk & safety assessments within interdisciplinary teams. Design prototypes & test infrastructure & automation solutions, implement them, take over technical product support across the entire product life cycle & support with production, assembly & commissioning work. Plan & carry out standard tests in-house, in external test laboratories & on customer premises. Your Skills: At least 3 years of relevant professional experience in Electronic Hardware Engineering & very proficient Electronic Development skills. Skilled & experienced in the Development of Industrial Control Electronics (CAN, BLDC, ACDC, EMC). Good Soldering skills. A knowledge of one or more PCB design tools (OrCAD, Altium, Mentor) is considered advantageous. Any experience in Python, C/C++ or similar programming languages is a plus. Ideally experienced in Motor Control. Experience in Obsolescence Management is desirable. Preferably experienced in the Transportation Industry, Industrial Environments, Safety-Critical Industries & Series Production. Your Profile: Completed University Degree in the field of Electronics, Electrical Engineering, Computer Science or similar. Enthusiastic to cooperate within Interdisciplinary Project Teams. Fluent in English (spoken & written). Any additional language skills in German or French are considered very advantageous.
03/05/2024
Full time
We are currently looking on behalf of one of our important clients for an Electronic Hardware Design Engineer. The role is a permanent position based Bern Canton & comes with some home office allowance. Your Role: Develop Electronics Solutions for customers, projects & a new product portfolio. Design, implement, document & verify Electronic HW for new & existing control systems. Work on international projects & participate in risk & safety assessments within interdisciplinary teams. Design prototypes & test infrastructure & automation solutions, implement them, take over technical product support across the entire product life cycle & support with production, assembly & commissioning work. Plan & carry out standard tests in-house, in external test laboratories & on customer premises. Your Skills: At least 3 years of relevant professional experience in Electronic Hardware Engineering & very proficient Electronic Development skills. Skilled & experienced in the Development of Industrial Control Electronics (CAN, BLDC, ACDC, EMC). Good Soldering skills. A knowledge of one or more PCB design tools (OrCAD, Altium, Mentor) is considered advantageous. Any experience in Python, C/C++ or similar programming languages is a plus. Ideally experienced in Motor Control. Experience in Obsolescence Management is desirable. Preferably experienced in the Transportation Industry, Industrial Environments, Safety-Critical Industries & Series Production. Your Profile: Completed University Degree in the field of Electronics, Electrical Engineering, Computer Science or similar. Enthusiastic to cooperate within Interdisciplinary Project Teams. Fluent in English (spoken & written). Any additional language skills in German or French are considered very advantageous.
Are you a talented Hardware Engineer seeking an innovative role in IoT and smart technology? Lynx Recruitment is recruiting for a Senior Hardware Engineer to join our clients' team in Cambridge, UK. You will work in their state-of-the-art office adjacent to the prestigious Cambridge Science Park, with access to prototype labs, equipment and collaboration spaces. As a key member of the hardware team, you will design, develop and test innovative narrowband RF devices and modules. Responsibilities: Support hardware development projects from concept to production Design and layout PCBs, select components, create prototypes Perform testing to verify and validate product performance Execute field trials and manage external test facilities Collaborate with software, operations and test engineers Requirements: Degree in Electronic/Electrical Engineering or similar experience 5+ years hardware design and test experience Knowledge of RF systems, cellular protocols, TCP/IP, etc. Proficiency with Altium, CAD tools and lab equipment Excellent analytical and troubleshooting skills Strong communication and teamwork abilities Our client offers a competitive salary, share options, health insurance, pension contributions and 25 days holiday. If you are seeking to progress your career in IoT/electronics design at an innovative tech company, apply today!
02/05/2024
Full time
Are you a talented Hardware Engineer seeking an innovative role in IoT and smart technology? Lynx Recruitment is recruiting for a Senior Hardware Engineer to join our clients' team in Cambridge, UK. You will work in their state-of-the-art office adjacent to the prestigious Cambridge Science Park, with access to prototype labs, equipment and collaboration spaces. As a key member of the hardware team, you will design, develop and test innovative narrowband RF devices and modules. Responsibilities: Support hardware development projects from concept to production Design and layout PCBs, select components, create prototypes Perform testing to verify and validate product performance Execute field trials and manage external test facilities Collaborate with software, operations and test engineers Requirements: Degree in Electronic/Electrical Engineering or similar experience 5+ years hardware design and test experience Knowledge of RF systems, cellular protocols, TCP/IP, etc. Proficiency with Altium, CAD tools and lab equipment Excellent analytical and troubleshooting skills Strong communication and teamwork abilities Our client offers a competitive salary, share options, health insurance, pension contributions and 25 days holiday. If you are seeking to progress your career in IoT/electronics design at an innovative tech company, apply today!
People Source Consulting Ltd
Gloucester, Gloucestershire
Role: Product Support Engineer - industrial automation - PLC - SERVO DRIVES - MOTION CONTROL Location: Gloucester + some remote work Salary: £competitive - we just want the right people ! Occasional international travel to support distributors (2 to 4 weeks per year). *This Client are exclusive to People Source so you MUST apply via this advert.* My client based in Gloucester are looking at hiring Product Support Engineers, this is a hands on role! You will be front line with the clients and customers and running projects from concept to delivery. You must have a technical understanding and a engineering background industrial automation - PLC - SERVO DRIVES - MOTION CONTROL. The Role: You will be working as part of a team alongside our development engineers and customers. Products are centred around programmable motion controllers with PLC functionality used in a broad range of industrial machines ranging from 3D printing to assembly line systems and industrial robots. You will be working with our product hardware and software engineers based in the UK, Italy and Bulgaria to bring the latest automation technology to the market. Alongside this, the role includes active dialogue with our customers and branch offices abroad and will require some limited travel both within and outside the UK. The ability to think logically about problem solving and experience writing software in a high level structured language will be needed and some experience with electrical wiring is desirable. Some prior mechanical knowledge will be helpful but training will be given where appropriate. Specific Job Responsibilities: Work with customers to support their ability to create world-class technical solutions using products, software and programming tools. Assist the development department with testing and evaluating new software and hardware, giving clear feedback to development engineers. Advise customers on the integration and commissioning of automation products including motion co-ordinators, high performance servo drives/motors and industrial robots. Work with branch offices in USA, India and China and with ESTUN Automation in China to provide industry leading products and a world-class customer experience Required Qualifications & Experience Training will be given in areas which are new to the applicant. Degree or similar higher qualification in Software/Mechatronics/Electronics or related discipline. Worked on interfacing automation hardware; eg sensors, actuators, drives and motors. A background in communications using serial, Ethernet and similar media. Experienced in programming industrial automation/manufacturing machines Having a thorough working knowledge and experience of 3 or more of the following will be beneficial: Implementing and commissioning stand-alone automation computers; eg PLC or Motion Controller. Good knowledge of a high level programming language; for example C, BASIC, Python. PLC programming, preferably using the standard IEC61131-3 environment. Electrical interfacing between a controller and sensors/actuators in an automation system. Servo drives and brushless servo motors. Stepper motors and drives. Ethernet networks, protocols and topology. A working knowledge of PCs running Windows. Basic level of Windows/Linux application programming. Real Time deterministic networks, eg EtherCAT, Sercos, CanOpen, Profinet RT. Application and configuration of Industrial Robots. Programming and configuration of touch-screen HMIs Applicants should be a team player and be able to communicate effectively in English. They must be legally entitled to live and work in the UK. A full driving licence is required and applicants must be eligible to obtain business visas for USA/Canada, China and India as some foreign travel may be necessary. Benefits: Attractive salary, profit related pay and pension contribution 5% Some remote/hybrid working up to 25% of working time Group Life and Health Cashplan Insurance How to apply? Send a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
02/05/2024
Full time
Role: Product Support Engineer - industrial automation - PLC - SERVO DRIVES - MOTION CONTROL Location: Gloucester + some remote work Salary: £competitive - we just want the right people ! Occasional international travel to support distributors (2 to 4 weeks per year). *This Client are exclusive to People Source so you MUST apply via this advert.* My client based in Gloucester are looking at hiring Product Support Engineers, this is a hands on role! You will be front line with the clients and customers and running projects from concept to delivery. You must have a technical understanding and a engineering background industrial automation - PLC - SERVO DRIVES - MOTION CONTROL. The Role: You will be working as part of a team alongside our development engineers and customers. Products are centred around programmable motion controllers with PLC functionality used in a broad range of industrial machines ranging from 3D printing to assembly line systems and industrial robots. You will be working with our product hardware and software engineers based in the UK, Italy and Bulgaria to bring the latest automation technology to the market. Alongside this, the role includes active dialogue with our customers and branch offices abroad and will require some limited travel both within and outside the UK. The ability to think logically about problem solving and experience writing software in a high level structured language will be needed and some experience with electrical wiring is desirable. Some prior mechanical knowledge will be helpful but training will be given where appropriate. Specific Job Responsibilities: Work with customers to support their ability to create world-class technical solutions using products, software and programming tools. Assist the development department with testing and evaluating new software and hardware, giving clear feedback to development engineers. Advise customers on the integration and commissioning of automation products including motion co-ordinators, high performance servo drives/motors and industrial robots. Work with branch offices in USA, India and China and with ESTUN Automation in China to provide industry leading products and a world-class customer experience Required Qualifications & Experience Training will be given in areas which are new to the applicant. Degree or similar higher qualification in Software/Mechatronics/Electronics or related discipline. Worked on interfacing automation hardware; eg sensors, actuators, drives and motors. A background in communications using serial, Ethernet and similar media. Experienced in programming industrial automation/manufacturing machines Having a thorough working knowledge and experience of 3 or more of the following will be beneficial: Implementing and commissioning stand-alone automation computers; eg PLC or Motion Controller. Good knowledge of a high level programming language; for example C, BASIC, Python. PLC programming, preferably using the standard IEC61131-3 environment. Electrical interfacing between a controller and sensors/actuators in an automation system. Servo drives and brushless servo motors. Stepper motors and drives. Ethernet networks, protocols and topology. A working knowledge of PCs running Windows. Basic level of Windows/Linux application programming. Real Time deterministic networks, eg EtherCAT, Sercos, CanOpen, Profinet RT. Application and configuration of Industrial Robots. Programming and configuration of touch-screen HMIs Applicants should be a team player and be able to communicate effectively in English. They must be legally entitled to live and work in the UK. A full driving licence is required and applicants must be eligible to obtain business visas for USA/Canada, China and India as some foreign travel may be necessary. Benefits: Attractive salary, profit related pay and pension contribution 5% Some remote/hybrid working up to 25% of working time Group Life and Health Cashplan Insurance How to apply? Send a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
Are you ready to shape the future of wireless technology? We're looking for a dynamic Baseband SoC Expert to lead the charge in developing revolutionary multi-standard solutions for next-generation wireless products. Responsibilities: Drive the architectural design of SoC/ASIC for 5.5/6G wireless products Define requirement specifications and evaluate IPs to ensure optimal performance Design and implement hardware blocks, establishing robust simulation environments for thorough testing. Collaborate closely with cross-functional teams including algorithm developers, hardware designers, and Embedded software experts Partner with the clients wireless teams in Asia to bring ground-breaking innovations to life. Qualifications: 5+ years of hands-on experience in SoC development within industry or academia. Proficiency in Verilog/VHDL for block design, with a strong grasp of C++ or SystemC. Knowledge of wireless physical layer applications is a plus. Expertise in microarchitecture design, including DSP/ARM/CPU and vector/Matrix/graph processors. Experience in designing memory systems such as SRAM/DRAM/Cache and overall SoC architecture. A Master's degree or Ph.D. in electrical engineering, computer architecture, or related field. If you are thinking of being at the forefront of technological advancements and part of ground-breaking projects, shaping the future of wireless communication, taking your career to new heights with opportunities for skill development and advancement within a leading global technology company, we invite you to apply.
01/05/2024
Full time
Are you ready to shape the future of wireless technology? We're looking for a dynamic Baseband SoC Expert to lead the charge in developing revolutionary multi-standard solutions for next-generation wireless products. Responsibilities: Drive the architectural design of SoC/ASIC for 5.5/6G wireless products Define requirement specifications and evaluate IPs to ensure optimal performance Design and implement hardware blocks, establishing robust simulation environments for thorough testing. Collaborate closely with cross-functional teams including algorithm developers, hardware designers, and Embedded software experts Partner with the clients wireless teams in Asia to bring ground-breaking innovations to life. Qualifications: 5+ years of hands-on experience in SoC development within industry or academia. Proficiency in Verilog/VHDL for block design, with a strong grasp of C++ or SystemC. Knowledge of wireless physical layer applications is a plus. Expertise in microarchitecture design, including DSP/ARM/CPU and vector/Matrix/graph processors. Experience in designing memory systems such as SRAM/DRAM/Cache and overall SoC architecture. A Master's degree or Ph.D. in electrical engineering, computer architecture, or related field. If you are thinking of being at the forefront of technological advancements and part of ground-breaking projects, shaping the future of wireless communication, taking your career to new heights with opportunities for skill development and advancement within a leading global technology company, we invite you to apply.
An Electrical/Electronic Engineer is required for a contract assignment with a multi-national leading defence company. Missile Architecture - Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support. It's an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: a) Specifying/determining * system electrical requirements * interface definitions and characteristics between subsystems/equipment * power architecture, including power budget and power profiles * data communication and processing architecture * requirements for EMC, bonding, grounding and screening * signal safety, including routing of safety related signals b) Supporting test and fault-finding activities during compatibility checks, risk reduction, system proving/qualification and integration c) Reviewing and authoring reports, guidelines and processes d) Design assessments and analysis e) Working to defence/industry standards f) Attending and supporting design reviews Alternatively, acting as the Equipment Manager (RMO) for specific electrical/electronic equipment(s) that are part of a missile or launcher system you will: a) Project manage the equipment(s) on behalf of the project during development, qualification and manufacture b) Own the requirements on behalf of the project for the equipment(s) c) Produce Statement(s) of Work for the associated design authority for the equipment(s) d) Create and update plans showing activities for the equipment(s) e) Manage internal & external design authorities for delivery of the equipment(s) hardware, software and deliverables to schedule, cost, quality and performance f) Hold regular progress reviews with the design authority for the equipment(s) g) Review qualification verification evidence h) Track and find resolution to equipment non-compliances i) Attend and support design reviews Skillset/experience required: Technical experience required: * electrical/electronics * interface definitions * knowledge of defence/industry standards, etc. * degree level qualification in a related subject * systems engineering * writing reports Ideally this would be within a defence related background, however, experience within other engineering industries will also be considered. Experience within these other areas are also of interest but not essential: * defence * weapon systems * power supplies * actuators * data communication * sensors * EMC * Health Usage Monitoring Systems (HUMS) * Model Based Engineering (MBE) Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
01/05/2024
Project-based
An Electrical/Electronic Engineer is required for a contract assignment with a multi-national leading defence company. Missile Architecture - Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support. It's an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: a) Specifying/determining * system electrical requirements * interface definitions and characteristics between subsystems/equipment * power architecture, including power budget and power profiles * data communication and processing architecture * requirements for EMC, bonding, grounding and screening * signal safety, including routing of safety related signals b) Supporting test and fault-finding activities during compatibility checks, risk reduction, system proving/qualification and integration c) Reviewing and authoring reports, guidelines and processes d) Design assessments and analysis e) Working to defence/industry standards f) Attending and supporting design reviews Alternatively, acting as the Equipment Manager (RMO) for specific electrical/electronic equipment(s) that are part of a missile or launcher system you will: a) Project manage the equipment(s) on behalf of the project during development, qualification and manufacture b) Own the requirements on behalf of the project for the equipment(s) c) Produce Statement(s) of Work for the associated design authority for the equipment(s) d) Create and update plans showing activities for the equipment(s) e) Manage internal & external design authorities for delivery of the equipment(s) hardware, software and deliverables to schedule, cost, quality and performance f) Hold regular progress reviews with the design authority for the equipment(s) g) Review qualification verification evidence h) Track and find resolution to equipment non-compliances i) Attend and support design reviews Skillset/experience required: Technical experience required: * electrical/electronics * interface definitions * knowledge of defence/industry standards, etc. * degree level qualification in a related subject * systems engineering * writing reports Ideally this would be within a defence related background, however, experience within other engineering industries will also be considered. Experience within these other areas are also of interest but not essential: * defence * weapon systems * power supplies * actuators * data communication * sensors * EMC * Health Usage Monitoring Systems (HUMS) * Model Based Engineering (MBE) Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.