Role: This position's prime responsibilities are for the development of new (to blank deposition technologies, new materials systems and new deposition products, the latter including coating challenges that blank may undertake for customers. The position improves the efficiency and throughput of the existing equipment and processes. The position is also responsible for any external Coating research collaborations that blank undertakes. Monitor global developments in thin film technology that might impact blank and to provide technical assessments of developing areas of application that might provide new business opportunities. Deliver business transformation through disruptive technology innovation. Review customer and market feedback to maximize impact of development and innovation efforts. Develop technology and innovation roadmaps that are aligned with our customers existing and emerging needs. Ensure the site has access to all sources of manufacturing and process best practice so that we gain and sustain a competitive advantage over our competitors. Assists the business development, sales, and marketing functions to maximise the competitiveness and responsiveness of our products and processes. Enable manufacturable results from development and innovation efforts. Leverage risks and opportunities- pursue and adopt new technologies and drive implementation across product lines Participate in proposal development and champion estimates and technical statements of work whilst serving as a technical spokesperson for blank Infrared. Serve as a key interface with customers and takes their needs and requirements as inputs to create high-value solutions. Implementation of optimal, cost-effective manufacturing processes and methods in accordance with product specifications and quality standards; recommends and implements improvements to production processes, methods, and controls; coordinates manufacturing launch for new or revised products An Engineering Degree in a STEM subject Preferred: Physics or Chemistry Proven Knowledge of Thin Film Coating Deposition Design and Control 5+ years of experience in high technology manufacturing or research labs Competent in Project Management Essential: Microsoft Office, Coating Design Software Possess strong problem-solving skills with an attention to detail Highly analytical mindset - Capability to travel internationally to support customer visits SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all
01/05/2024
Full time
Role: This position's prime responsibilities are for the development of new (to blank deposition technologies, new materials systems and new deposition products, the latter including coating challenges that blank may undertake for customers. The position improves the efficiency and throughput of the existing equipment and processes. The position is also responsible for any external Coating research collaborations that blank undertakes. Monitor global developments in thin film technology that might impact blank and to provide technical assessments of developing areas of application that might provide new business opportunities. Deliver business transformation through disruptive technology innovation. Review customer and market feedback to maximize impact of development and innovation efforts. Develop technology and innovation roadmaps that are aligned with our customers existing and emerging needs. Ensure the site has access to all sources of manufacturing and process best practice so that we gain and sustain a competitive advantage over our competitors. Assists the business development, sales, and marketing functions to maximise the competitiveness and responsiveness of our products and processes. Enable manufacturable results from development and innovation efforts. Leverage risks and opportunities- pursue and adopt new technologies and drive implementation across product lines Participate in proposal development and champion estimates and technical statements of work whilst serving as a technical spokesperson for blank Infrared. Serve as a key interface with customers and takes their needs and requirements as inputs to create high-value solutions. Implementation of optimal, cost-effective manufacturing processes and methods in accordance with product specifications and quality standards; recommends and implements improvements to production processes, methods, and controls; coordinates manufacturing launch for new or revised products An Engineering Degree in a STEM subject Preferred: Physics or Chemistry Proven Knowledge of Thin Film Coating Deposition Design and Control 5+ years of experience in high technology manufacturing or research labs Competent in Project Management Essential: Microsoft Office, Coating Design Software Possess strong problem-solving skills with an attention to detail Highly analytical mindset - Capability to travel internationally to support customer visits SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all
EDI Specialist Full time permanent (35hrs/5 days, Monday - Friday) Max salary of £65k Office based with occasional international(European) travel involved Responsible for developing and supporting EDI solutions. You will be responsible for: Develop EDI solutions between client systems and customers Single EDI messages, suites of messages, and more complex projects that customers are demanding such as Direct to Consumer drop shipments. Unit test all new EDI and assist test team during testing phases of projects To be considered you must have: Experience in EDI delivery with D365 F&O Development experience creating and supporting new EDI solutions Experience working with 3rd party EDI providers Real world development experience and knowledge of the development life cycle To increase products eg EDI Studio Essential skills include: Experience in Omnichannel retailing EDI message standards and formats D365 data entities and table structures Ability to estimate accurately and deliver to deadlines Some appreciation of integration methods Understanding of networking and security principles Excellent written and oral language skills EDI Studio tool Developer Certification of an integration technology Due to the volume of applications received for positions, it will not be possible to respond to all applications and only applicants who are considered suitable for interview will be contacted. Proactive Appointments Limited operates as an employment agency and employment business and is an equal opportunities organisation We take our obligations to protect your personal data very seriously. Any information provided to us will be processed as detailed in our Privacy Notice, a copy of which can be found on our website
01/05/2024
Full time
EDI Specialist Full time permanent (35hrs/5 days, Monday - Friday) Max salary of £65k Office based with occasional international(European) travel involved Responsible for developing and supporting EDI solutions. You will be responsible for: Develop EDI solutions between client systems and customers Single EDI messages, suites of messages, and more complex projects that customers are demanding such as Direct to Consumer drop shipments. Unit test all new EDI and assist test team during testing phases of projects To be considered you must have: Experience in EDI delivery with D365 F&O Development experience creating and supporting new EDI solutions Experience working with 3rd party EDI providers Real world development experience and knowledge of the development life cycle To increase products eg EDI Studio Essential skills include: Experience in Omnichannel retailing EDI message standards and formats D365 data entities and table structures Ability to estimate accurately and deliver to deadlines Some appreciation of integration methods Understanding of networking and security principles Excellent written and oral language skills EDI Studio tool Developer Certification of an integration technology Due to the volume of applications received for positions, it will not be possible to respond to all applications and only applicants who are considered suitable for interview will be contacted. Proactive Appointments Limited operates as an employment agency and employment business and is an equal opportunities organisation We take our obligations to protect your personal data very seriously. Any information provided to us will be processed as detailed in our Privacy Notice, a copy of which can be found on our website
Modern Workplace Security Engineer Remote (travel required occasionally) £56,000 - £66,000 VIQU are seeking a Modern Workplace Security Engineer to join a multinational IT business that specialise in providing a broad spectrum of IT services and solutions, from IT consulting and system integrations to cloud services and E-commerce solutions. The successful Modern Workplace Security Engineer will be responsible for planning, designing, migrating, and securing Microsoft Cloud solutions for clients. Your main objective will revolve around grasping our clients' needs to adeptly craft and implement Modern Workplace and Microsoft security solutions, adhering to best practices. You will maintain collaboration and clear communication with all relevant stakeholders, as this will be pivotal in ensuring the delivery of top-notch solutions and services. The Modern Workplace Security Engineerwill possess a profound understanding of Microsoft Security & Modern Workplace technologies. Requirements of the Modern Workplace Security Engineer: - Demonstrated expertise in architecting and deploying client solutions within Microsoft Cloud Security and Modern Workplace. - Strong proficiency in Microsoft cloud services, particularly Azure and Microsoft 365. - Extensive knowledge of EMS technologies such as Microsoft Intune, Azure Active Directory, and Conditional Access. - Familiarity with mobile device and application management, as well as identity and access management principles. - Solid grasp of information protection and data security, including Azure Cloud Security. - Experience with security assessment methodologies and automation Scripting using PowerShell, Azure CLI, or similar tools. - Proficiency in utilising monitoring and logging tools like Azure Monitor, Log Analytics, and Application Insights. - Exceptional problem-solving skills, especially in troubleshooting complex issues. - Relevant Azure certifications (eg, Azure Administrator Associate, Azure Solutions Architect Expert, Azure Security Engineer Associate). - Excellent communication and collaboration abilities with both technical and non-technical stakeholders. - Strong commitment to continuous learning and self-improvement in cloud computing and security domains. To discuss this opportunity further, APPLY NOW for a confidential conversation with your VIQU Consultant. For additional information, contact Katie Dark at (see below). If you refer someone ideal for this role, VIQU offers an introduction fee up to £1,000 once your referral starts work with our client (terms apply). Modern Workplace Security Engineer Remote (travel required occasionally) £56,000 - £66,000
01/05/2024
Full time
Modern Workplace Security Engineer Remote (travel required occasionally) £56,000 - £66,000 VIQU are seeking a Modern Workplace Security Engineer to join a multinational IT business that specialise in providing a broad spectrum of IT services and solutions, from IT consulting and system integrations to cloud services and E-commerce solutions. The successful Modern Workplace Security Engineer will be responsible for planning, designing, migrating, and securing Microsoft Cloud solutions for clients. Your main objective will revolve around grasping our clients' needs to adeptly craft and implement Modern Workplace and Microsoft security solutions, adhering to best practices. You will maintain collaboration and clear communication with all relevant stakeholders, as this will be pivotal in ensuring the delivery of top-notch solutions and services. The Modern Workplace Security Engineerwill possess a profound understanding of Microsoft Security & Modern Workplace technologies. Requirements of the Modern Workplace Security Engineer: - Demonstrated expertise in architecting and deploying client solutions within Microsoft Cloud Security and Modern Workplace. - Strong proficiency in Microsoft cloud services, particularly Azure and Microsoft 365. - Extensive knowledge of EMS technologies such as Microsoft Intune, Azure Active Directory, and Conditional Access. - Familiarity with mobile device and application management, as well as identity and access management principles. - Solid grasp of information protection and data security, including Azure Cloud Security. - Experience with security assessment methodologies and automation Scripting using PowerShell, Azure CLI, or similar tools. - Proficiency in utilising monitoring and logging tools like Azure Monitor, Log Analytics, and Application Insights. - Exceptional problem-solving skills, especially in troubleshooting complex issues. - Relevant Azure certifications (eg, Azure Administrator Associate, Azure Solutions Architect Expert, Azure Security Engineer Associate). - Excellent communication and collaboration abilities with both technical and non-technical stakeholders. - Strong commitment to continuous learning and self-improvement in cloud computing and security domains. To discuss this opportunity further, APPLY NOW for a confidential conversation with your VIQU Consultant. For additional information, contact Katie Dark at (see below). If you refer someone ideal for this role, VIQU offers an introduction fee up to £1,000 once your referral starts work with our client (terms apply). Modern Workplace Security Engineer Remote (travel required occasionally) £56,000 - £66,000
Global Technology Solutions Ltd
Edinburgh, Midlothian
location: Edinburgh Pay rate: £200 per day Duration: 3-6 month contract Hours: 37.5-hour week between 07:30 - 17:30, Monday - Thursday and 07:30 - 16:00 on Fridays Must already hold SC Security Clearance Supporting one of our clients based from the site in Edinburgh, day-to-day activities will include resolving a wide variety of desktop software and hardware incidents and service requests, while minimising disruption and providing first-class customer Service. The site benefits from easy access to travel links, free on-site parking and employee rates at the on-site restaurant. Primary role requirements: * Responsible for maintaining and promoting highest level of service to the client * Adhering to technical standards, service delivery processes and ensuring service delivery is both cost effective and efficient * Responsible for Incident ticket handling, escalation and problem diagnosis * Desktop/Laptop/VDI - build, configuration and deployment to end users * Assist with software installation/deployment * Assist with Smarthphone deployments Secondary role requirements: * Assisting the 3rd Line support teams with laptop, desktop and VDI terminals support tickets * Hardware installation/upgrade/break fix for desktop, laptop, and server * Smarthpone support * Assisting with customer projects * Create and update procedural documentation * Basic telephony support and cable patching * Provide second line operational support across a variety of platforms. * Initial investigation and reporting of network failures. Essential Skills and Qualifications: * Knowledge of Microsoft Windows 10 Operating Systems - Deployment, configuration, and support * Knowledge of Microsoft Office 2010 onwards * Working knowledge of Active Directory - Users and Computers * Have an understanding of DNS, DHCP * Working knowledge of Cisco AnyConnect VPN * RSA Secure Login administration * Proven and demonstrable software and hardware troubleshooting skills * Knowledge of Microsoft SCCM and OS/Application deployment * Good written communication: concise and accurate call logging, documentation and email correspondence * Able to work well as part of a team or independently Desirable skills/qualifications: * ITIL Version 3/4 Foundation * CompTia A+ Certification * Microsoft Windows 7/10 training and certification If you have the skills required please apply now In applying for this position, you consent to your personal data being shared with the specified employer and for your details to remain with GTS for as long as is necessary to process your application. See our Privacy Notice for full information Global Technology Solutions is acting as an Employment Business in relation to this vacancy.
30/04/2024
Project-based
location: Edinburgh Pay rate: £200 per day Duration: 3-6 month contract Hours: 37.5-hour week between 07:30 - 17:30, Monday - Thursday and 07:30 - 16:00 on Fridays Must already hold SC Security Clearance Supporting one of our clients based from the site in Edinburgh, day-to-day activities will include resolving a wide variety of desktop software and hardware incidents and service requests, while minimising disruption and providing first-class customer Service. The site benefits from easy access to travel links, free on-site parking and employee rates at the on-site restaurant. Primary role requirements: * Responsible for maintaining and promoting highest level of service to the client * Adhering to technical standards, service delivery processes and ensuring service delivery is both cost effective and efficient * Responsible for Incident ticket handling, escalation and problem diagnosis * Desktop/Laptop/VDI - build, configuration and deployment to end users * Assist with software installation/deployment * Assist with Smarthphone deployments Secondary role requirements: * Assisting the 3rd Line support teams with laptop, desktop and VDI terminals support tickets * Hardware installation/upgrade/break fix for desktop, laptop, and server * Smarthpone support * Assisting with customer projects * Create and update procedural documentation * Basic telephony support and cable patching * Provide second line operational support across a variety of platforms. * Initial investigation and reporting of network failures. Essential Skills and Qualifications: * Knowledge of Microsoft Windows 10 Operating Systems - Deployment, configuration, and support * Knowledge of Microsoft Office 2010 onwards * Working knowledge of Active Directory - Users and Computers * Have an understanding of DNS, DHCP * Working knowledge of Cisco AnyConnect VPN * RSA Secure Login administration * Proven and demonstrable software and hardware troubleshooting skills * Knowledge of Microsoft SCCM and OS/Application deployment * Good written communication: concise and accurate call logging, documentation and email correspondence * Able to work well as part of a team or independently Desirable skills/qualifications: * ITIL Version 3/4 Foundation * CompTia A+ Certification * Microsoft Windows 7/10 training and certification If you have the skills required please apply now In applying for this position, you consent to your personal data being shared with the specified employer and for your details to remain with GTS for as long as is necessary to process your application. See our Privacy Notice for full information Global Technology Solutions is acting as an Employment Business in relation to this vacancy.
SCADA Systems Engineer Permanent, Full-Time, On-site Our client, experiencing continuous growth, seeks to onboard several SCADA Systems Engineers to augment their team across diverse locations. About the client: They specialise in providing support for projects delivered by various service providers, catering to customers in utilities, pharmaceuticals, food & beverage, and chemicals industries. What's in this for you? Career development within a successful and growing business! Smooth recruitment process: Two sages. Teams/On-site. Role: You will join the Engineering Team working with other Control Systems Engineers and be responsible for the design, development, and commissioning of SCADA control systems across a range of industries. The role will be office based but will require you to travel to client premises for meetings and site-based project & commissioning activities. You will: Build relationships with customers through good communication in meetings, presentations, and documentation. Help develop other staff in design and technical skills. Understand a project life cycle from concept through to completion. Take ownership of a task or project and ensure delivery. Produce and review specifications and design documentation. Configure and develop software for a wide variety of applications. Test and commission safely in a working end user environment. Maintain high standards and be consistent throughout the design process. Work as a part of a team and be adaptable to a range of environments. Ensure compliance with all requirements of the company Integrated Management System Skills/Experience: Demonstrable track record in the successful design and development of cost effective projects encompassing SCADA control solutions within some of Food, Utilities, FMCG, Process and Materials Handling Industries Good working knowledge of AVEVA System Platform (Application Server, Historian and/or InTouch examination passes desirable) Other SCADA System experience desirable (Ignition, WinCC, Rockwell, Schneider Geo SCADA Expert) Good working knowledge of PLC programming and communication desirable Please apply for more information! The JM Longbridge Group is operating and advertising as an Employment Agency for permanent positions and as an Employment Business for interim/contract/temporary positions. The JM Longbridge Group is an Equal Opportunities employer and we encourage applicants from all backgrounds.
30/04/2024
Full time
SCADA Systems Engineer Permanent, Full-Time, On-site Our client, experiencing continuous growth, seeks to onboard several SCADA Systems Engineers to augment their team across diverse locations. About the client: They specialise in providing support for projects delivered by various service providers, catering to customers in utilities, pharmaceuticals, food & beverage, and chemicals industries. What's in this for you? Career development within a successful and growing business! Smooth recruitment process: Two sages. Teams/On-site. Role: You will join the Engineering Team working with other Control Systems Engineers and be responsible for the design, development, and commissioning of SCADA control systems across a range of industries. The role will be office based but will require you to travel to client premises for meetings and site-based project & commissioning activities. You will: Build relationships with customers through good communication in meetings, presentations, and documentation. Help develop other staff in design and technical skills. Understand a project life cycle from concept through to completion. Take ownership of a task or project and ensure delivery. Produce and review specifications and design documentation. Configure and develop software for a wide variety of applications. Test and commission safely in a working end user environment. Maintain high standards and be consistent throughout the design process. Work as a part of a team and be adaptable to a range of environments. Ensure compliance with all requirements of the company Integrated Management System Skills/Experience: Demonstrable track record in the successful design and development of cost effective projects encompassing SCADA control solutions within some of Food, Utilities, FMCG, Process and Materials Handling Industries Good working knowledge of AVEVA System Platform (Application Server, Historian and/or InTouch examination passes desirable) Other SCADA System experience desirable (Ignition, WinCC, Rockwell, Schneider Geo SCADA Expert) Good working knowledge of PLC programming and communication desirable Please apply for more information! The JM Longbridge Group is operating and advertising as an Employment Agency for permanent positions and as an Employment Business for interim/contract/temporary positions. The JM Longbridge Group is an Equal Opportunities employer and we encourage applicants from all backgrounds.
Lead IT Engineer Leeds-with travel around Yorkshire £31,000 to £34,000 Your new company Hays Technology are recruiting a Lead IT Engineer to join a large, growing public sector organisation based in the Yorkshire area. You will be part of the IT Service Support team and will be reporting into the IT Service Support Manager. You will be required to visit various sites across Yorkshire offering a wide-ranging technical support service. Your new role In your new role, you will be responsible for maintaining the availability and functionality of the end-user environment, whilst taking ownership of complex technical tasks, supporting infrastructure improvement projects, and optimising the investment in IT systems. You will be delivering outstanding customer service and support, as well as taking a proactive approach to work, demonstrating meticulous attention to detail. You will also be providing support for Microsoft O365, deploying and installing software, managing Active Directory and troubleshooting printers, whilst supporting Windows 10/11 deployment, resolving related issues and troubleshooting PC hardware problems. You will also be conducting basic network and connectivity troubleshooting. What you'll need to succeed Experience in tier 2 technical support, along with extensive knowledge of computer systems, hardware, and software Significant experience of desktop operating systems, software packaging, mobile device management and deployment tools Experience working Microsoft O365 such as Azure and SharePoint Having a basic understanding of network troubleshooting Excellent interpersonal skills and the ability to communicate complex technical issues to non-technical individuals Driving License & access to a vehicle is essential What you'll get in return This exciting position is paying between £31,000 to £34,000 negotiable on experience and offers an excellent work-life balance including: hybrid working, generous annual leave (27 days rising to 32 after 1 years' service, training, and development opportunities. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.
30/04/2024
Full time
Lead IT Engineer Leeds-with travel around Yorkshire £31,000 to £34,000 Your new company Hays Technology are recruiting a Lead IT Engineer to join a large, growing public sector organisation based in the Yorkshire area. You will be part of the IT Service Support team and will be reporting into the IT Service Support Manager. You will be required to visit various sites across Yorkshire offering a wide-ranging technical support service. Your new role In your new role, you will be responsible for maintaining the availability and functionality of the end-user environment, whilst taking ownership of complex technical tasks, supporting infrastructure improvement projects, and optimising the investment in IT systems. You will be delivering outstanding customer service and support, as well as taking a proactive approach to work, demonstrating meticulous attention to detail. You will also be providing support for Microsoft O365, deploying and installing software, managing Active Directory and troubleshooting printers, whilst supporting Windows 10/11 deployment, resolving related issues and troubleshooting PC hardware problems. You will also be conducting basic network and connectivity troubleshooting. What you'll need to succeed Experience in tier 2 technical support, along with extensive knowledge of computer systems, hardware, and software Significant experience of desktop operating systems, software packaging, mobile device management and deployment tools Experience working Microsoft O365 such as Azure and SharePoint Having a basic understanding of network troubleshooting Excellent interpersonal skills and the ability to communicate complex technical issues to non-technical individuals Driving License & access to a vehicle is essential What you'll get in return This exciting position is paying between £31,000 to £34,000 negotiable on experience and offers an excellent work-life balance including: hybrid working, generous annual leave (27 days rising to 32 after 1 years' service, training, and development opportunities. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.
Technical Writer (f/m/d) - FrameMaker/ Ixiasoft / ST4/ German/international Project: For our customer Roche Diagnostics International AG based in Rotkreuz we are looking for a highly qualified Technical Writer Background: Global Customer Support (GCS) is the global organisation responsible for Technical Services in the Diagnostics Division, which ensures end user success. GCS supports the service organisations of the Roche affiliates and the Lifecycle-Teams. Within the GCS Knowledge & Learning Excellence chapter, we deliver the right content at the right time via the right channels for our customers to enable error-free operation of our products. We use multilingual data to improve the customer experience with our digital service solutions and products. We ensure that internal knowledge is curated and spread across all Customer Areas, and efficiently and properly prepared for our customers. The perfect candidates need to have a professional background as a technical writer with proven experience in technical writing including experience with Adobe FrameMaker (XML-based). Tasks & Responsibilities: . Writes and updates customer-facing and service content in English for Roche instruments and software, while respecting project timelines and documentation standards, guidelines, and templates. . Independently gathers and consolidates the information needed for the technical content creation. Creates content. Works closely with the content manager, project manager, project teams, manufacturer, and subject matter experts in development teams and within GCS (both locally and globally). . Independently creates and modifies multimedia content as required (eg photographs, screenshots, videos, 3D graphics, diagrams) using appropriate software tools, or triggers the creation and integrates them into deliverables while adhering to established guidelines. . Collects input for documentation updates and produces these updates in close coordination with the content manager, subject matter experts, and project teams. . Ensures that quality targets, timelines, and regulatory requirements are respected. . After translation, creates target language versions of deliverables (in all appropriate formats). . Uses knowledge and expertise to proactively contribute to regular updates of content creation tools, processes, and standards, in alignment with other KLE sub-chapters and relevant stakeholders. . Checks documents or topics written by other technical writers, ensuring that terminology and content creation guidelines have been followed. Provides feedback to the author regarding the changes needed. . Contributes to the continuous growth of product terminology in close collaboration with the Terminology & Language Solutions Expert assigned to the product. . In collaboration with the User Experience department and the Terminology & Language Solutions Expert assigned to the project, creates English user interface messages/UI text, and reviews them for translatability, terminological correctness, and adherence to style guidelines. . Actively contributes to the risk assessment process for assigned products, ensuring that all relevant product risks and their mitigations are described in the documentation. . May be responsible for content management tasks, such as organizing the review of the deliverables produced. . May assist the Language Operations sub-chapter with translation-related tasks: communicates with translation vendors to define timelines or clarify questions and coordinates the translation review process with affiliates, if required. Additional tasks: . May act as a Terminology & Language Solutions Expert. Creates and manages English terminology for assigned products and ensures the entry of approved terms and definitions in the Roche terminology database (DIAlex). Provides product terminology to stakeholders. Must Haves: . Min. bachelor's degree in technical writing or similar . Proven experience in technical writing, preferably in a diagnostics business environment . At least 3-5 years' experience of using Adobe FrameMaker (XML-based) or a similar structured authoring tool . Min. first experience with Ixiasoft, Schema ST4, or a similar Component Content Management System . Knowledge of multimedia tools and processes used in state-of-the-art technical documentation . Familiarity with hardware and software development processes . Excellent spoken and written command of English (native/fluent speaker or equivalent level) . Ability to communicate in an international environment with subject matter experts from different functional areas . Willingness to travel Nice to Have: . Familiarity with laboratory systems and environments . Experience in minimalistic and topic-oriented writing . Good command of German Reference Nr.: 923332SGR Role: Technical Writer Industrie: Pharma Workplace: Rotkreuz Pensum: 100% Start: 01.06.2024 Duration: 36 Deadline : 06.05.2024 If you are interested in this position, please send us your complete dossier via the link in this advertisement. About us : ITech Consult is an ISO 9001:2015 certified Swiss company with offices in Germany and Ireland. ITech Consult specialises in the placement of highly qualified candidates for recruitment in the fields of IT, Life Science & Engineering. We offer staff leasing & payroll services. For our candidates this is free of charge, also for Payroll we do not charge you any additional fees.
30/04/2024
Project-based
Technical Writer (f/m/d) - FrameMaker/ Ixiasoft / ST4/ German/international Project: For our customer Roche Diagnostics International AG based in Rotkreuz we are looking for a highly qualified Technical Writer Background: Global Customer Support (GCS) is the global organisation responsible for Technical Services in the Diagnostics Division, which ensures end user success. GCS supports the service organisations of the Roche affiliates and the Lifecycle-Teams. Within the GCS Knowledge & Learning Excellence chapter, we deliver the right content at the right time via the right channels for our customers to enable error-free operation of our products. We use multilingual data to improve the customer experience with our digital service solutions and products. We ensure that internal knowledge is curated and spread across all Customer Areas, and efficiently and properly prepared for our customers. The perfect candidates need to have a professional background as a technical writer with proven experience in technical writing including experience with Adobe FrameMaker (XML-based). Tasks & Responsibilities: . Writes and updates customer-facing and service content in English for Roche instruments and software, while respecting project timelines and documentation standards, guidelines, and templates. . Independently gathers and consolidates the information needed for the technical content creation. Creates content. Works closely with the content manager, project manager, project teams, manufacturer, and subject matter experts in development teams and within GCS (both locally and globally). . Independently creates and modifies multimedia content as required (eg photographs, screenshots, videos, 3D graphics, diagrams) using appropriate software tools, or triggers the creation and integrates them into deliverables while adhering to established guidelines. . Collects input for documentation updates and produces these updates in close coordination with the content manager, subject matter experts, and project teams. . Ensures that quality targets, timelines, and regulatory requirements are respected. . After translation, creates target language versions of deliverables (in all appropriate formats). . Uses knowledge and expertise to proactively contribute to regular updates of content creation tools, processes, and standards, in alignment with other KLE sub-chapters and relevant stakeholders. . Checks documents or topics written by other technical writers, ensuring that terminology and content creation guidelines have been followed. Provides feedback to the author regarding the changes needed. . Contributes to the continuous growth of product terminology in close collaboration with the Terminology & Language Solutions Expert assigned to the product. . In collaboration with the User Experience department and the Terminology & Language Solutions Expert assigned to the project, creates English user interface messages/UI text, and reviews them for translatability, terminological correctness, and adherence to style guidelines. . Actively contributes to the risk assessment process for assigned products, ensuring that all relevant product risks and their mitigations are described in the documentation. . May be responsible for content management tasks, such as organizing the review of the deliverables produced. . May assist the Language Operations sub-chapter with translation-related tasks: communicates with translation vendors to define timelines or clarify questions and coordinates the translation review process with affiliates, if required. Additional tasks: . May act as a Terminology & Language Solutions Expert. Creates and manages English terminology for assigned products and ensures the entry of approved terms and definitions in the Roche terminology database (DIAlex). Provides product terminology to stakeholders. Must Haves: . Min. bachelor's degree in technical writing or similar . Proven experience in technical writing, preferably in a diagnostics business environment . At least 3-5 years' experience of using Adobe FrameMaker (XML-based) or a similar structured authoring tool . Min. first experience with Ixiasoft, Schema ST4, or a similar Component Content Management System . Knowledge of multimedia tools and processes used in state-of-the-art technical documentation . Familiarity with hardware and software development processes . Excellent spoken and written command of English (native/fluent speaker or equivalent level) . Ability to communicate in an international environment with subject matter experts from different functional areas . Willingness to travel Nice to Have: . Familiarity with laboratory systems and environments . Experience in minimalistic and topic-oriented writing . Good command of German Reference Nr.: 923332SGR Role: Technical Writer Industrie: Pharma Workplace: Rotkreuz Pensum: 100% Start: 01.06.2024 Duration: 36 Deadline : 06.05.2024 If you are interested in this position, please send us your complete dossier via the link in this advertisement. About us : ITech Consult is an ISO 9001:2015 certified Swiss company with offices in Germany and Ireland. ITech Consult specialises in the placement of highly qualified candidates for recruitment in the fields of IT, Life Science & Engineering. We offer staff leasing & payroll services. For our candidates this is free of charge, also for Payroll we do not charge you any additional fees.
FIELD SERVICE ENGINEER Medical Imaging Equipment The Company An exciting new Service Engineering opportunity is now available within an industry leading provider of medical imaging systems. Training is provided and so this employer offers a rare opportunity for engineers with no medical experience to break into the much sought after medical field. Through organic growth along with the acquisition of other companies, you would be joining this organisation during an exciting period of expansion. The Role As a Field Service Engineer you would be part of the Service Engineering team carrying out installations, planned and reactive maintenance as well as break down repair work on a range of medical imaging systems such as MRIs, CTs, X-Rays and Ultrasounds. You would be responsible for managing customers assigned to you, hospitals, predominantly in the South West of England. However, as with any field based role, flexibility to travel further afield will be required on occasions should this be required by the wider team and business. The Location This role will predominantly involve travel in and around the South West of England, ideally living in and around the Bristol/Bath/Yeovil areas. However, flexibility to travel is essential. Training Training is provided. This employer regularly hires engineers from non-medical industries who have transferable electro-mechanical repair and software installation/upgrade skills. Therefore, a comprehensive, "tried and tested" training plan is in place to ensure you are well supported and appropriately upskilled. The Package £37,000 - £40,000 per year basic salary Company car or £5,400 car allowance Paid overtime (x1.5 Mon- Fri, x2 Sun/BH) Private pension Group income protection 25 days' holiday + bank Hours are Monday - Friday 43.5 hrs including travel What experience is required to apply? Strong electro-mechanical service, fault finding and repair skills Experience with software installations or upgrades Excellent customer service and team work skills Positive attitude and willingness to learn An enjoyment of driving and flexibility to travel as part of a field based role Living within a reasonable distance of Bristol/Bath/Yeovil If you are an engineer wanting to break into a highly sought after industry working complex medical imaging equipment, then click APPLY NOW to begin your application!
30/04/2024
Full time
FIELD SERVICE ENGINEER Medical Imaging Equipment The Company An exciting new Service Engineering opportunity is now available within an industry leading provider of medical imaging systems. Training is provided and so this employer offers a rare opportunity for engineers with no medical experience to break into the much sought after medical field. Through organic growth along with the acquisition of other companies, you would be joining this organisation during an exciting period of expansion. The Role As a Field Service Engineer you would be part of the Service Engineering team carrying out installations, planned and reactive maintenance as well as break down repair work on a range of medical imaging systems such as MRIs, CTs, X-Rays and Ultrasounds. You would be responsible for managing customers assigned to you, hospitals, predominantly in the South West of England. However, as with any field based role, flexibility to travel further afield will be required on occasions should this be required by the wider team and business. The Location This role will predominantly involve travel in and around the South West of England, ideally living in and around the Bristol/Bath/Yeovil areas. However, flexibility to travel is essential. Training Training is provided. This employer regularly hires engineers from non-medical industries who have transferable electro-mechanical repair and software installation/upgrade skills. Therefore, a comprehensive, "tried and tested" training plan is in place to ensure you are well supported and appropriately upskilled. The Package £37,000 - £40,000 per year basic salary Company car or £5,400 car allowance Paid overtime (x1.5 Mon- Fri, x2 Sun/BH) Private pension Group income protection 25 days' holiday + bank Hours are Monday - Friday 43.5 hrs including travel What experience is required to apply? Strong electro-mechanical service, fault finding and repair skills Experience with software installations or upgrades Excellent customer service and team work skills Positive attitude and willingness to learn An enjoyment of driving and flexibility to travel as part of a field based role Living within a reasonable distance of Bristol/Bath/Yeovil If you are an engineer wanting to break into a highly sought after industry working complex medical imaging equipment, then click APPLY NOW to begin your application!
FIELD SERVICE ENGINEER MEDICAL IMAGING EQUIPMENT The Company An exciting new Service Engineering opportunity is now available within an industry leading provider of medical imaging systems. Training is provided and so this employer offers a rare opportunity for engineers with no medical experience to break into the much sought after medical field. Through organic growth along with the acquisition of other companies, you would be joining this organisation during an exciting period of expansion. The Role As a Field Service Engineer you would be part of the Service Engineering team carrying out installations, planned and reactive maintenance as well as break down repair work on a range of medical imaging systems such as MRIs, CTs, X-Rays and Ultrasounds. You would be responsible for managing customers assigned to you, hospitals, predominantly in the West of Ireland. However, as with any field based role, flexibility to travel further afield will be required on occasions should this be required by the wider team and business. You will be required to take part in an out of hours on call rota 1 in every 6 weeks, paid at 200EUR per week. The Location This role will predominantly involve travel in and around the Cork and so ideally applicants will live within 45mins of Cork. However, flexibility to travel is essential. Training Training is provided. This employer regularly hires engineers from non-medical industries who have transferable electro-mechanical repair and software installation/upgrade skills. Therefore, a comprehensive, "tried and tested" training plan is in place to ensure you are well supported and appropriately upskilled. The Package 40-55,000EUR per year basic salary 11EUR per day lunch allowance A choice of a company car or car allowance paid at 8,000EUR per year Minimum on call payment of 200EUR per week (1 in 6 weeks) Private pension Life assurance 33 days annual leave (including bank holidays) What experience is required to apply? Strong electro-mechanical service, fault finding and repair skills Experience with software installations or upgrades Excellent customer service and team work skills Positive attitude and willingness to learn An enjoyment of driving and flexibility to travel as part of a field based role Living within 34mins of Cork Next steps? Click APPLY NOW for a copy of your CV to be sent to CBSbutler. CVs will be reviewed from 2nd Jan and should you be suitable a CBSbutler representative will be in touch within 3 working days.
30/04/2024
Full time
FIELD SERVICE ENGINEER MEDICAL IMAGING EQUIPMENT The Company An exciting new Service Engineering opportunity is now available within an industry leading provider of medical imaging systems. Training is provided and so this employer offers a rare opportunity for engineers with no medical experience to break into the much sought after medical field. Through organic growth along with the acquisition of other companies, you would be joining this organisation during an exciting period of expansion. The Role As a Field Service Engineer you would be part of the Service Engineering team carrying out installations, planned and reactive maintenance as well as break down repair work on a range of medical imaging systems such as MRIs, CTs, X-Rays and Ultrasounds. You would be responsible for managing customers assigned to you, hospitals, predominantly in the West of Ireland. However, as with any field based role, flexibility to travel further afield will be required on occasions should this be required by the wider team and business. You will be required to take part in an out of hours on call rota 1 in every 6 weeks, paid at 200EUR per week. The Location This role will predominantly involve travel in and around the Cork and so ideally applicants will live within 45mins of Cork. However, flexibility to travel is essential. Training Training is provided. This employer regularly hires engineers from non-medical industries who have transferable electro-mechanical repair and software installation/upgrade skills. Therefore, a comprehensive, "tried and tested" training plan is in place to ensure you are well supported and appropriately upskilled. The Package 40-55,000EUR per year basic salary 11EUR per day lunch allowance A choice of a company car or car allowance paid at 8,000EUR per year Minimum on call payment of 200EUR per week (1 in 6 weeks) Private pension Life assurance 33 days annual leave (including bank holidays) What experience is required to apply? Strong electro-mechanical service, fault finding and repair skills Experience with software installations or upgrades Excellent customer service and team work skills Positive attitude and willingness to learn An enjoyment of driving and flexibility to travel as part of a field based role Living within 34mins of Cork Next steps? Click APPLY NOW for a copy of your CV to be sent to CBSbutler. CVs will be reviewed from 2nd Jan and should you be suitable a CBSbutler representative will be in touch within 3 working days.
The Role: The role is highly connected to all parts of the business. Sitting as part of the group Building Surveying and Technical services team, the role supports surveyors, portfolio, and brand teams, ESG, H&S, and maintains close relationships with portfolio projects and development. This combined with building relationships with technical consultants, manufacturers, external surveying teams, incumbent providers, investment, and other stakeholders creates a diverse and multifaceted position. The candidate will proactively support the philosophy of the business within a highly technical forum, blending engineering excellence with strong communication skills and flexibility. The role also leads the engineering oversight of life cycle replacement, compiling, advising, and reviewing budget requirements with our external consultants, service partners and portfolio managers. Once the budgets are approved, the formation of a project team and execution of MEP related works are all under the control of the senior engineer. The Team: There are no direct reports in this role, but you will be required to manage external consultants, and at times the service partners on a job-by-job basis. There is a requirement for a joined up approach to be fostered with the CBRE team as at Bluewater as they support the witnessing and commissioning of the retail units. As part of the wider BSTS team, strong, honest, and open collaboration is vital to maintain consistent standards and approaches across the Client brand. What you will be responsible for: * Provide support and guidance on all Engineering issues, including but not limited to; Licences to Alter, Life cycle replacement, feasibility, energy management, statutory requirements, Client specifications and guidance for external customers. * Ensure fit outs are thoroughly reviewed and tracked, ensuring commissioning documentation is in line with requirements, and witness where required. This at times will be out of hours. * Lead fit out pre-start meetings to ensure Operations teams are supported as demised works begins. * Provide a proactive escalation point for all customer fit outs, regularly visiting sites to ensure works are proceeding as approved. * Project by project liaison with internal and external insurers for design approval of life safety systems and risks. * Day to day liaison of the external consultants engaged in the provision of Surveying and Engineering services. Assist in the management of the framework of the external contractors involved on PPM & LCR (life cycle replacement) contract. * Support and liaise with Portfolio Project team if engineering issues are beyond the technical ability of the Operations team. * Bring to the attention of the Portfolio, Operations and Development teams any outstanding works or engineering rectifications needed to facilitate the Customers' or landlords' works. * Maintain personal contact with customers and act as point of contact and reference for all stakeholders on engineering matters. * Assist as needed in the review and approval of design for fit out works on FRI (Full Repair and Insure), Managed or new assets. * Hold strong relationships in Development, Portfolio and Operations to ensure cross pollination of new strategy and potential issues, maintaining the reputation of engineering function within the Building Surveying team. * Provide technical support for major technical service contract tender exercises. * Project manage enabling works for minor fit out related engineering services that the Portfolio Project team agrees to. * At times, for reasons of consistency, resilience and learning opportunities, the role will include travel to our London HQ, and nationally to other centres. * Have a good understanding of building surveying functions and recognise the need for their involvement, engaging and always collaborating to ensure works are executed smoothly and with all technical aspects considered. * Ability to make all decisions commensurate with this job role. Your skills, experience and qualifications: Essential criteria * A strong, broad background in Building services Engineering * An excellent understanding of statutory building requirements, particularly life safety systems such as sprinklers and fire alarms. * A history of successful involvement in building management and maintenance, both planned and reactive * Demonstrable understanding of all elements of Building Engineering and working knowledge of fabric and structural issues * Degree qualified or similar experience in Engineering with extensive post qualification experience of working in a similar role. * Member of relevant professional body eg, CIBSE, IET, IMechE, etc. Keen to progress to possible CEng status. * IT literate, essential to be able to handle and interpret CAD files and PDF technical drawings. * NEBOSH or similar H&S qualification Our Recruitment Delivery Team are committed to offering an inclusive recruitment experience to all candidates. If you require any accommodations or adjustments as a result of disability, impairment, or health condition, please do not hesitate to let me know by emailing
30/04/2024
Full time
The Role: The role is highly connected to all parts of the business. Sitting as part of the group Building Surveying and Technical services team, the role supports surveyors, portfolio, and brand teams, ESG, H&S, and maintains close relationships with portfolio projects and development. This combined with building relationships with technical consultants, manufacturers, external surveying teams, incumbent providers, investment, and other stakeholders creates a diverse and multifaceted position. The candidate will proactively support the philosophy of the business within a highly technical forum, blending engineering excellence with strong communication skills and flexibility. The role also leads the engineering oversight of life cycle replacement, compiling, advising, and reviewing budget requirements with our external consultants, service partners and portfolio managers. Once the budgets are approved, the formation of a project team and execution of MEP related works are all under the control of the senior engineer. The Team: There are no direct reports in this role, but you will be required to manage external consultants, and at times the service partners on a job-by-job basis. There is a requirement for a joined up approach to be fostered with the CBRE team as at Bluewater as they support the witnessing and commissioning of the retail units. As part of the wider BSTS team, strong, honest, and open collaboration is vital to maintain consistent standards and approaches across the Client brand. What you will be responsible for: * Provide support and guidance on all Engineering issues, including but not limited to; Licences to Alter, Life cycle replacement, feasibility, energy management, statutory requirements, Client specifications and guidance for external customers. * Ensure fit outs are thoroughly reviewed and tracked, ensuring commissioning documentation is in line with requirements, and witness where required. This at times will be out of hours. * Lead fit out pre-start meetings to ensure Operations teams are supported as demised works begins. * Provide a proactive escalation point for all customer fit outs, regularly visiting sites to ensure works are proceeding as approved. * Project by project liaison with internal and external insurers for design approval of life safety systems and risks. * Day to day liaison of the external consultants engaged in the provision of Surveying and Engineering services. Assist in the management of the framework of the external contractors involved on PPM & LCR (life cycle replacement) contract. * Support and liaise with Portfolio Project team if engineering issues are beyond the technical ability of the Operations team. * Bring to the attention of the Portfolio, Operations and Development teams any outstanding works or engineering rectifications needed to facilitate the Customers' or landlords' works. * Maintain personal contact with customers and act as point of contact and reference for all stakeholders on engineering matters. * Assist as needed in the review and approval of design for fit out works on FRI (Full Repair and Insure), Managed or new assets. * Hold strong relationships in Development, Portfolio and Operations to ensure cross pollination of new strategy and potential issues, maintaining the reputation of engineering function within the Building Surveying team. * Provide technical support for major technical service contract tender exercises. * Project manage enabling works for minor fit out related engineering services that the Portfolio Project team agrees to. * At times, for reasons of consistency, resilience and learning opportunities, the role will include travel to our London HQ, and nationally to other centres. * Have a good understanding of building surveying functions and recognise the need for their involvement, engaging and always collaborating to ensure works are executed smoothly and with all technical aspects considered. * Ability to make all decisions commensurate with this job role. Your skills, experience and qualifications: Essential criteria * A strong, broad background in Building services Engineering * An excellent understanding of statutory building requirements, particularly life safety systems such as sprinklers and fire alarms. * A history of successful involvement in building management and maintenance, both planned and reactive * Demonstrable understanding of all elements of Building Engineering and working knowledge of fabric and structural issues * Degree qualified or similar experience in Engineering with extensive post qualification experience of working in a similar role. * Member of relevant professional body eg, CIBSE, IET, IMechE, etc. Keen to progress to possible CEng status. * IT literate, essential to be able to handle and interpret CAD files and PDF technical drawings. * NEBOSH or similar H&S qualification Our Recruitment Delivery Team are committed to offering an inclusive recruitment experience to all candidates. If you require any accommodations or adjustments as a result of disability, impairment, or health condition, please do not hesitate to let me know by emailing
Position: B1/2 Licenced Engineer Location: East Midlands Working Hours: 5-5-4 Shift Pattern Competitive Salary + Excellent Benefits! Great Work-Life Balance with a 5-5-4 Shift Pattern! Type Rating Training included for the right individuals! Opportunities for professional development! For more details, read on! Actively seeking talented Licenced Engineers to join our talent Engineering Team on an exciting project based in East Midlands. This opportunity is to support a high-profile customer through a dedicated workforce understanding the need to deliver impeccable service in an active operational environment. To be considered for this position you will hold, a UK CAA Part 66 B1, B2 or B3 Licence with no limitations on airframe or engine that would otherwise restrict the addition of Group 3 type rating for: Vulcanair P68R Victor' Preferred candidates will already hold the Group 3 type rating, however applicants with other similar type ratings will be considered as training and type courses may be provided. Mission system operating and maintenance experience also desirable. The successful candidate will join a long established and respected forward-thinking company that has a proven pedigree in career development within the organisation. As part of this role, you must be prepared to work flexibly as part of a team and as an integral part of the Gama Engineering Group, possessing strong communication, organisation and leadership skills. / About us: A hugely diverse business that offers much more than perhaps its name would suggest. Yes, we fly but we also save lives, provide mission critical intelligence, and build systems that deliver decisive advantage. With operations in the UK, US, Middle East and Hong Kong a career with us can offer travel, personal growth opportunities and the ability for long-term progression in a fast paced and dynamic service industry. / Responsibilities: Responsible for the successful completion of all allocated, planned and ad-hoc maintenance tasks Ensure the completion of scheduled customer order requirements when acting as supervising, certifying or category C engineer for a given input Responsible for the management of and performance/quality of performed works in compliance with applicable company process and procedures Ensure correct compliance with applicable regulatory requirements Maintain the required engineering licence and applicable type rating as required to perform duties and be responsible for ensuring licences and type ratings do not lapse and are kept up to date Accountable for providing professional communication with customers and contacts as required Individual responsibility for booking accurate, and consistent timekeeping in applicable software system / Skills, Qualifications and Experience required: Essential An Unrestricted UK CAA Part 66 Licence Category B1, B2 and/or B3 Previous aircraft base maintenance experience with a wide knowledge and skill range in servicing, inspection repair and modifications Satisfactory recency as required for issue of applicable certifying approval Full UK Driving Licence Advantageous Hold the Group 3 type rating for Vulcanair P68R / In addition to a Competitive Salary, we will offer you: Great work life balance with a 5-5-4 shift pattern Competitive Group Pension Scheme Life Assurance. Income Protection. Travel Insurance. Private Healthcare (after successful passing of probation). Free Car Parking 2 Paid Volunteering Days each calendar year (subject to line manager approval) .(Subject to insurance underwriting) Due to the volume of applications received, only candidates selected for interview will be contacted. If you do not hear from us within 20 working days then your application has been unsuccessful on this occasion.
29/04/2024
Full time
Position: B1/2 Licenced Engineer Location: East Midlands Working Hours: 5-5-4 Shift Pattern Competitive Salary + Excellent Benefits! Great Work-Life Balance with a 5-5-4 Shift Pattern! Type Rating Training included for the right individuals! Opportunities for professional development! For more details, read on! Actively seeking talented Licenced Engineers to join our talent Engineering Team on an exciting project based in East Midlands. This opportunity is to support a high-profile customer through a dedicated workforce understanding the need to deliver impeccable service in an active operational environment. To be considered for this position you will hold, a UK CAA Part 66 B1, B2 or B3 Licence with no limitations on airframe or engine that would otherwise restrict the addition of Group 3 type rating for: Vulcanair P68R Victor' Preferred candidates will already hold the Group 3 type rating, however applicants with other similar type ratings will be considered as training and type courses may be provided. Mission system operating and maintenance experience also desirable. The successful candidate will join a long established and respected forward-thinking company that has a proven pedigree in career development within the organisation. As part of this role, you must be prepared to work flexibly as part of a team and as an integral part of the Gama Engineering Group, possessing strong communication, organisation and leadership skills. / About us: A hugely diverse business that offers much more than perhaps its name would suggest. Yes, we fly but we also save lives, provide mission critical intelligence, and build systems that deliver decisive advantage. With operations in the UK, US, Middle East and Hong Kong a career with us can offer travel, personal growth opportunities and the ability for long-term progression in a fast paced and dynamic service industry. / Responsibilities: Responsible for the successful completion of all allocated, planned and ad-hoc maintenance tasks Ensure the completion of scheduled customer order requirements when acting as supervising, certifying or category C engineer for a given input Responsible for the management of and performance/quality of performed works in compliance with applicable company process and procedures Ensure correct compliance with applicable regulatory requirements Maintain the required engineering licence and applicable type rating as required to perform duties and be responsible for ensuring licences and type ratings do not lapse and are kept up to date Accountable for providing professional communication with customers and contacts as required Individual responsibility for booking accurate, and consistent timekeeping in applicable software system / Skills, Qualifications and Experience required: Essential An Unrestricted UK CAA Part 66 Licence Category B1, B2 and/or B3 Previous aircraft base maintenance experience with a wide knowledge and skill range in servicing, inspection repair and modifications Satisfactory recency as required for issue of applicable certifying approval Full UK Driving Licence Advantageous Hold the Group 3 type rating for Vulcanair P68R / In addition to a Competitive Salary, we will offer you: Great work life balance with a 5-5-4 shift pattern Competitive Group Pension Scheme Life Assurance. Income Protection. Travel Insurance. Private Healthcare (after successful passing of probation). Free Car Parking 2 Paid Volunteering Days each calendar year (subject to line manager approval) .(Subject to insurance underwriting) Due to the volume of applications received, only candidates selected for interview will be contacted. If you do not hear from us within 20 working days then your application has been unsuccessful on this occasion.
Project Design Engineer Chippenham Up to £55k Progressive Engineering and a Global Automotive Engineering Company, who work with Global Automotive OEM's, are looking to recruit a Project Design Engineer on a permanent basis for their Engineering HQ in the Chippenham area (Wiltshire), owing to succession planning, project pipeline and business forecast for 2024-27+. Reporting into the Engineering Manager, the Project Design Engineer will be working directly with Mechanical Systems Engineers at Automotive OEM's to design, develop, integrate & package my client's mechanical products onto new & existing Automotive On-Highway Platforms. Acting as the technical interface between Customer and internal Design/CAD, Build & Manufacturing Functions, the Project Design Engineer will be responsible for: Design study schedule, the design study budget and the consistency of the product design in relation to the specifications and customer expectations. Overseeing and validating the product design in compliance with the business rules. May manage one or several projects. Manages the functional analysis and product failure mode analysis (FMEA). Ensures the application of standards. Formalizes the design requirements to our suppliers. Presents internally and externally (customers) the adopted technical solutions. Contributes to maintain and develop the knowledge and expertise within the assigned area of responsibility. Takes an active role in technical meetings, project reviews. Manages plan developments and ensures the follow-up of existing products. For this Project Design Engineer role, my client is looking for a Project Design Engineer with the following Qualifications, Experience & Qualifications: Degree in Mechanical Engineering (or similar - Aerospace Engineering, Motorsport Engineering, Aeronautical Engineering etc) Experience as a Project Engineer within an Automotive Environment and/or for Automotive Applications/Automotive Customers Sound understanding of systems level design and translation down to components Experience working in a customer/client-facing environment Experience using 3D CAD Software (Inventor, Solidworks, ProE, Creo etc) to create concept Engineering Drawings Experience of using CAE Analysis & Simulation/FEA Package AND Hand/Engineering Calculations to validate and prove design concepts Experience & understanding of Engineering process tools (Functional Analysis/Product Failure Mode Analysis/FMEA, DVP&R, DMR etc) Understanding of production methods (injection moulding, aluminium extrusion etc) and material properties (metal, engineered plastic & rubber) Experience of GD&T/Geometric dimensioning and tolerancing/BS8888 For the successful Project Design Engineer, a salary up to £55,000 & package reflective of experience is on offer and this Project Design Engineer role is commutable from Bath, Corsham, Bristol, Lyneham, Royal Wootton Bassett, Trowbridge, Castle Combe, Malmesbury, Tetbury, Keynsham, Swindon, Cirencester, Stroud and Devizes. Some UK & International Travel is required to Customer & Manufacturing Sites for this Project Design Engineer role and my client does offer hybrid working after successful completion of the probation period. To be considered for this Project Design Engineer role, please apply via the link below. To find out more about Progressive Recruitment please visit our website Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
29/04/2024
Full time
Project Design Engineer Chippenham Up to £55k Progressive Engineering and a Global Automotive Engineering Company, who work with Global Automotive OEM's, are looking to recruit a Project Design Engineer on a permanent basis for their Engineering HQ in the Chippenham area (Wiltshire), owing to succession planning, project pipeline and business forecast for 2024-27+. Reporting into the Engineering Manager, the Project Design Engineer will be working directly with Mechanical Systems Engineers at Automotive OEM's to design, develop, integrate & package my client's mechanical products onto new & existing Automotive On-Highway Platforms. Acting as the technical interface between Customer and internal Design/CAD, Build & Manufacturing Functions, the Project Design Engineer will be responsible for: Design study schedule, the design study budget and the consistency of the product design in relation to the specifications and customer expectations. Overseeing and validating the product design in compliance with the business rules. May manage one or several projects. Manages the functional analysis and product failure mode analysis (FMEA). Ensures the application of standards. Formalizes the design requirements to our suppliers. Presents internally and externally (customers) the adopted technical solutions. Contributes to maintain and develop the knowledge and expertise within the assigned area of responsibility. Takes an active role in technical meetings, project reviews. Manages plan developments and ensures the follow-up of existing products. For this Project Design Engineer role, my client is looking for a Project Design Engineer with the following Qualifications, Experience & Qualifications: Degree in Mechanical Engineering (or similar - Aerospace Engineering, Motorsport Engineering, Aeronautical Engineering etc) Experience as a Project Engineer within an Automotive Environment and/or for Automotive Applications/Automotive Customers Sound understanding of systems level design and translation down to components Experience working in a customer/client-facing environment Experience using 3D CAD Software (Inventor, Solidworks, ProE, Creo etc) to create concept Engineering Drawings Experience of using CAE Analysis & Simulation/FEA Package AND Hand/Engineering Calculations to validate and prove design concepts Experience & understanding of Engineering process tools (Functional Analysis/Product Failure Mode Analysis/FMEA, DVP&R, DMR etc) Understanding of production methods (injection moulding, aluminium extrusion etc) and material properties (metal, engineered plastic & rubber) Experience of GD&T/Geometric dimensioning and tolerancing/BS8888 For the successful Project Design Engineer, a salary up to £55,000 & package reflective of experience is on offer and this Project Design Engineer role is commutable from Bath, Corsham, Bristol, Lyneham, Royal Wootton Bassett, Trowbridge, Castle Combe, Malmesbury, Tetbury, Keynsham, Swindon, Cirencester, Stroud and Devizes. Some UK & International Travel is required to Customer & Manufacturing Sites for this Project Design Engineer role and my client does offer hybrid working after successful completion of the probation period. To be considered for this Project Design Engineer role, please apply via the link below. To find out more about Progressive Recruitment please visit our website Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
Principal Process Engineer Burton-on-Trent £DoE Progressive GE and an International Engineering Consultancy, specialising in Engineered Process Solutions for the FMCG, Food, Drink & Brewing Industries are looking to recruit a Principal Process Engineer on a Staff/Permanent Basis, owing to business growth, succession planning & project pipeline for 2024-26+. Reporting into an Engineering Manager, the Principal Process Engineer will be the Technical Authority on multi-disciplinary projects to design and construct state-of-the-art facilities through the full life cycle, from initial feasibility studies to engineering design, construction management, and operational optimisation. Specifically, the Principal Process Engineer will be responsible for: Undertake the role of subject matter expert with significant knowledge and experience of process systems and provide engineering guidance to other departments Manage all phases of technical process projects, leading in overseeing the implementation of process equipment and technology Develop commercially focused innovative engineering solutions to solve complex Client problems with responsibility for delivery from initial conception through to final handover Work as an effective member of a multi-disciplined project team leading one or more of the engineering disciplines Commit to delivering project objectives within capital, time, quality, and legislative parameters Assist in the overall development of the Process team, including the mentoring of junior/graduate Engineers Experience & Qualifications Required for Principal Process Engineer Role: Degree educated in a relevant engineering discipline (Chemical/Process Engineering) Prior experience as a Principal Process Engineer/Lead Process Engineer/Senior Process Engineer Prior process system design & project delivery experience within FMCG/Food/Drink/Brewing/Pharmaceutical/Advanced Renewable Technologies Understanding of process analysis techniques (eg HAZOP studies) and process improvement initiatives Strong communication and interpersonal skills Flexibility to travel both in the UK and internationally, as and when required Proficient in the use of MS Office, MS Project and AutoCAD Valid driving licence and vehicle owner For the successful Principal Process Engineer, a salary reflective of experience is on offer + car allowance + package + hybrid/flexible working is on offer. To be considered for this Principal Process Engineer role, please apply via the link below. To find out more about Progressive Recruitment please visit our website Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
29/04/2024
Full time
Principal Process Engineer Burton-on-Trent £DoE Progressive GE and an International Engineering Consultancy, specialising in Engineered Process Solutions for the FMCG, Food, Drink & Brewing Industries are looking to recruit a Principal Process Engineer on a Staff/Permanent Basis, owing to business growth, succession planning & project pipeline for 2024-26+. Reporting into an Engineering Manager, the Principal Process Engineer will be the Technical Authority on multi-disciplinary projects to design and construct state-of-the-art facilities through the full life cycle, from initial feasibility studies to engineering design, construction management, and operational optimisation. Specifically, the Principal Process Engineer will be responsible for: Undertake the role of subject matter expert with significant knowledge and experience of process systems and provide engineering guidance to other departments Manage all phases of technical process projects, leading in overseeing the implementation of process equipment and technology Develop commercially focused innovative engineering solutions to solve complex Client problems with responsibility for delivery from initial conception through to final handover Work as an effective member of a multi-disciplined project team leading one or more of the engineering disciplines Commit to delivering project objectives within capital, time, quality, and legislative parameters Assist in the overall development of the Process team, including the mentoring of junior/graduate Engineers Experience & Qualifications Required for Principal Process Engineer Role: Degree educated in a relevant engineering discipline (Chemical/Process Engineering) Prior experience as a Principal Process Engineer/Lead Process Engineer/Senior Process Engineer Prior process system design & project delivery experience within FMCG/Food/Drink/Brewing/Pharmaceutical/Advanced Renewable Technologies Understanding of process analysis techniques (eg HAZOP studies) and process improvement initiatives Strong communication and interpersonal skills Flexibility to travel both in the UK and internationally, as and when required Proficient in the use of MS Office, MS Project and AutoCAD Valid driving licence and vehicle owner For the successful Principal Process Engineer, a salary reflective of experience is on offer + car allowance + package + hybrid/flexible working is on offer. To be considered for this Principal Process Engineer role, please apply via the link below. To find out more about Progressive Recruitment please visit our website Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
29/04/2024
Project-based
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
Role: This position's prime responsibilities are for the development of new (to blank deposition technologies, new materials systems and new deposition products, the latter including coating challenges that blank may undertake for customers. The position improves the efficiency and throughput of the existing equipment and processes. The position is also responsible for any external Coating research collaborations that blank undertakes. Monitor global developments in thin film technology that might impact blank and to provide technical assessments of developing areas of application that might provide new business opportunities. Deliver business transformation through disruptive technology innovation. Review customer and market feedback to maximize impact of development and innovation efforts. Develop technology and innovation roadmaps that are aligned with our customers existing and emerging needs. Ensure the site has access to all sources of manufacturing and process best practice so that we gain and sustain a competitive advantage over our competitors. Assists the business development, sales, and marketing functions to maximise the competitiveness and responsiveness of our products and processes. Enable manufacturable results from development and innovation efforts. Leverage risks and opportunities- pursue and adopt new technologies and drive implementation across product lines Participate in proposal development and champion estimates and technical statements of work whilst serving as a technical spokesperson for blank Infrared. Serve as a key interface with customers and takes their needs and requirements as inputs to create high-value solutions. Implementation of optimal, cost-effective manufacturing processes and methods in accordance with product specifications and quality standards; recommends and implements improvements to production processes, methods, and controls; coordinates manufacturing launch for new or revised products An Engineering Degree in a STEM subject Preferred: Physics or Chemistry Proven Knowledge of Thin Film Coating Deposition Design and Control 5+ years of experience in high technology manufacturing or research labs Competent in Project Management Essential: Microsoft Office, Coating Design Software Possess strong problem-solving skills with an attention to detail Highly analytical mindset - Capability to travel internationally to support customer visits SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all
26/04/2024
Full time
Role: This position's prime responsibilities are for the development of new (to blank deposition technologies, new materials systems and new deposition products, the latter including coating challenges that blank may undertake for customers. The position improves the efficiency and throughput of the existing equipment and processes. The position is also responsible for any external Coating research collaborations that blank undertakes. Monitor global developments in thin film technology that might impact blank and to provide technical assessments of developing areas of application that might provide new business opportunities. Deliver business transformation through disruptive technology innovation. Review customer and market feedback to maximize impact of development and innovation efforts. Develop technology and innovation roadmaps that are aligned with our customers existing and emerging needs. Ensure the site has access to all sources of manufacturing and process best practice so that we gain and sustain a competitive advantage over our competitors. Assists the business development, sales, and marketing functions to maximise the competitiveness and responsiveness of our products and processes. Enable manufacturable results from development and innovation efforts. Leverage risks and opportunities- pursue and adopt new technologies and drive implementation across product lines Participate in proposal development and champion estimates and technical statements of work whilst serving as a technical spokesperson for blank Infrared. Serve as a key interface with customers and takes their needs and requirements as inputs to create high-value solutions. Implementation of optimal, cost-effective manufacturing processes and methods in accordance with product specifications and quality standards; recommends and implements improvements to production processes, methods, and controls; coordinates manufacturing launch for new or revised products An Engineering Degree in a STEM subject Preferred: Physics or Chemistry Proven Knowledge of Thin Film Coating Deposition Design and Control 5+ years of experience in high technology manufacturing or research labs Competent in Project Management Essential: Microsoft Office, Coating Design Software Possess strong problem-solving skills with an attention to detail Highly analytical mindset - Capability to travel internationally to support customer visits SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all
A Design and Transition Manager is being sought at the start of a journey as our customer continue to transition to a Group IT function. This is a newly created position to be moulded by successful applicant. The successful candidate will be responsible for overseeing technology transitions and managing design projects. Client Details Our client is a well-established industrial and manufacturing company based in Gloucestershire. They are a large, international organisation with a workforce of over 7,500 employees globally. The company is known for its commitment to innovation and its state-of-the-art technology solutions. Description Accountable for establishing, documenting, and publicising the Service Design & Transition processes and strategy, which will include the Service Design Package & Service Level packages. Ensure the proposed solutions fit within the IT Operating model and IT Strategy. Guarantee all acceptance criteria and Go Live requirements have been met ensuring a seamless delivery into live operations. Provide Service Designs in the form of high to low-level Service Designs documenting and discussing with the relevant Service Owners or delegates what is required to deliver, operate, and manage the services to be consumed by the customer. Design and document how services and solutions will be monitored, maintained, and reported against, including what Service Levels the service will deliver (including contractual obligations, service level agreements, 3rd party service measurements and engagement approaches and any further metrics and KPIs). Assist in the development of existing ITIL processes (Incident, Request, Problem, Change, Capacity, Risk, etc) to ensure consistent application and delivery across all services and support teams. Manage the Service Design of a portfolio of projects - being responsible for the relevant documentation throughout the Project and Service Lifecycles. Manage the transition of new or changes to services into live, ensuring that they meet the standards and criteria for implementation into the production environment, including communicating to relevant stakeholders/customers on these changes. Collaborate with Project Managers, Finance, Procurement, Service Owners and technical individuals to ensure services, and non-functional requirements are documented, commercialised, and invoiced. Engage with a wide variety of stakeholders across a globally federated business across all levels, setting expectations and confirming requirements on the appropriate Design and Transition plans. Profile The successful Design and Transition Manager should have: Degree or relevant equivalent experience. ITILv4 Foundation required ITIL Service Design best practises Excellent interpersonal skills and a friendly and helpful attitude Ability to organise yourself and initiate work actions proactively. Ability to support others in driving actions to a completion. The confidence to challenge constructively and support others in doing the same. Outstanding communication skills, both written and verbal. Creative problem solver with the ability to deliver pragmatic solutions. Able to and encourage collaboration across teams and able to manage complex stakeholders. Demonstrable evidence of working effectively as part of a team. A strong sense of financial and commercial awareness. Understanding of Project Management methodologies Proven track record in Incident, Problem, Change, Release desired. The ability to communicate effectively with all levels of the business, up to director level. Job Offer On offer for the Design and Transition Manager is: A competitive salary in the range of £50,000 - £55,000 per annum. Hybrid working is welcomed, will be requirement to travel to Gloucestershire. An excellent benefits package including: Private Medical, Dental insurance, up to 10% company contribution toward pension, 27 days annual leave + much more The opportunity to work in an innovative, international company. A supportive work culture with a focus on employee development. We encourage all suitable candidates to apply for this exciting opportunity. This is a fantastic chance to join a leading company in the industrial and manufacturing industry and to further develop your career in technology management.
26/04/2024
Full time
A Design and Transition Manager is being sought at the start of a journey as our customer continue to transition to a Group IT function. This is a newly created position to be moulded by successful applicant. The successful candidate will be responsible for overseeing technology transitions and managing design projects. Client Details Our client is a well-established industrial and manufacturing company based in Gloucestershire. They are a large, international organisation with a workforce of over 7,500 employees globally. The company is known for its commitment to innovation and its state-of-the-art technology solutions. Description Accountable for establishing, documenting, and publicising the Service Design & Transition processes and strategy, which will include the Service Design Package & Service Level packages. Ensure the proposed solutions fit within the IT Operating model and IT Strategy. Guarantee all acceptance criteria and Go Live requirements have been met ensuring a seamless delivery into live operations. Provide Service Designs in the form of high to low-level Service Designs documenting and discussing with the relevant Service Owners or delegates what is required to deliver, operate, and manage the services to be consumed by the customer. Design and document how services and solutions will be monitored, maintained, and reported against, including what Service Levels the service will deliver (including contractual obligations, service level agreements, 3rd party service measurements and engagement approaches and any further metrics and KPIs). Assist in the development of existing ITIL processes (Incident, Request, Problem, Change, Capacity, Risk, etc) to ensure consistent application and delivery across all services and support teams. Manage the Service Design of a portfolio of projects - being responsible for the relevant documentation throughout the Project and Service Lifecycles. Manage the transition of new or changes to services into live, ensuring that they meet the standards and criteria for implementation into the production environment, including communicating to relevant stakeholders/customers on these changes. Collaborate with Project Managers, Finance, Procurement, Service Owners and technical individuals to ensure services, and non-functional requirements are documented, commercialised, and invoiced. Engage with a wide variety of stakeholders across a globally federated business across all levels, setting expectations and confirming requirements on the appropriate Design and Transition plans. Profile The successful Design and Transition Manager should have: Degree or relevant equivalent experience. ITILv4 Foundation required ITIL Service Design best practises Excellent interpersonal skills and a friendly and helpful attitude Ability to organise yourself and initiate work actions proactively. Ability to support others in driving actions to a completion. The confidence to challenge constructively and support others in doing the same. Outstanding communication skills, both written and verbal. Creative problem solver with the ability to deliver pragmatic solutions. Able to and encourage collaboration across teams and able to manage complex stakeholders. Demonstrable evidence of working effectively as part of a team. A strong sense of financial and commercial awareness. Understanding of Project Management methodologies Proven track record in Incident, Problem, Change, Release desired. The ability to communicate effectively with all levels of the business, up to director level. Job Offer On offer for the Design and Transition Manager is: A competitive salary in the range of £50,000 - £55,000 per annum. Hybrid working is welcomed, will be requirement to travel to Gloucestershire. An excellent benefits package including: Private Medical, Dental insurance, up to 10% company contribution toward pension, 27 days annual leave + much more The opportunity to work in an innovative, international company. A supportive work culture with a focus on employee development. We encourage all suitable candidates to apply for this exciting opportunity. This is a fantastic chance to join a leading company in the industrial and manufacturing industry and to further develop your career in technology management.
Global Technology Solutions Ltd
Edinburgh, Midlothian
Job title: Desktop Engineer (with network experience) Contract length: 3-months Day rate: £240 inside ir35 through umbrella Location: Edinburgh *Must be holding SC Clearance* Supporting one of our clients based from in Edinburgh, day-to-day activities will include resolving a wide variety of desktop software and hardware incidents along with some physical network duties. The site benefits from: * Easy access to travel links * Free on-site parking * Employee rates at the on-site restaurant Site hours are: 07:00 - 16:30 Mon-Thurs and 07:00 - 13:30 Fri - hours to be agreed. Due to the nature of our client's work the successful candidate will need to be hold SC Security Clearance. For this reason, we are only able to progress with applications from British nationals. Primary role requirements: * Responsible for maintaining and promoting highest level of service to the client * Adhering to technical standards, service delivery processes and ensuring service delivery is both cost effective and efficient * Responsible for Incident ticket handling, escalation and problem diagnosis * Desktop/Laptop/VDI - build, configuration and deployment to end users * Assist with software installation/deployment * Assist with Smarthphone deployments Secondary role requirements: * Assisting the 3rd Line support teams with laptop, desktop and VDI terminals support tickets * Hardware installation/upgrade/break fix for desktop, laptop, and server * Smarthpone support * Network patching and troubleshooting Essential Skills and Qualifications: * Knowledge of Microsoft Windows 10 Operating Systems - Deployment, configuration, and support * Knowledge of Microsoft Office 2010 onwards * Working knowledge of Active Directory - Users and Computers * Have an understanding of DNS, DHCP * Working knowledge of Cisco AnyConnect VPN * RSA Secure Login administration * Proven and demonstrable software and hardware troubleshooting skills * Knowledge of Microsoft SCCM and OS/Application deployment * Good written communication: concise and accurate call logging, documentation and email correspondence * Able to work well as part of a team or independently Desirable skills/qualifications: * ITIL Version 3/4 Foundation * CompTia A+ Certification * Microsoft Windows 7/10 training and certification If you have the skill required, please apply now In applying for this position, you consent to your personal data being shared with the specified employer and for your details to remain with GTS for as long as is necessary to process your application. See our Privacy Notice for full information Global Technology Solutions is acting as an Employment Business in relation to this vacancy
25/04/2024
Project-based
Job title: Desktop Engineer (with network experience) Contract length: 3-months Day rate: £240 inside ir35 through umbrella Location: Edinburgh *Must be holding SC Clearance* Supporting one of our clients based from in Edinburgh, day-to-day activities will include resolving a wide variety of desktop software and hardware incidents along with some physical network duties. The site benefits from: * Easy access to travel links * Free on-site parking * Employee rates at the on-site restaurant Site hours are: 07:00 - 16:30 Mon-Thurs and 07:00 - 13:30 Fri - hours to be agreed. Due to the nature of our client's work the successful candidate will need to be hold SC Security Clearance. For this reason, we are only able to progress with applications from British nationals. Primary role requirements: * Responsible for maintaining and promoting highest level of service to the client * Adhering to technical standards, service delivery processes and ensuring service delivery is both cost effective and efficient * Responsible for Incident ticket handling, escalation and problem diagnosis * Desktop/Laptop/VDI - build, configuration and deployment to end users * Assist with software installation/deployment * Assist with Smarthphone deployments Secondary role requirements: * Assisting the 3rd Line support teams with laptop, desktop and VDI terminals support tickets * Hardware installation/upgrade/break fix for desktop, laptop, and server * Smarthpone support * Network patching and troubleshooting Essential Skills and Qualifications: * Knowledge of Microsoft Windows 10 Operating Systems - Deployment, configuration, and support * Knowledge of Microsoft Office 2010 onwards * Working knowledge of Active Directory - Users and Computers * Have an understanding of DNS, DHCP * Working knowledge of Cisco AnyConnect VPN * RSA Secure Login administration * Proven and demonstrable software and hardware troubleshooting skills * Knowledge of Microsoft SCCM and OS/Application deployment * Good written communication: concise and accurate call logging, documentation and email correspondence * Able to work well as part of a team or independently Desirable skills/qualifications: * ITIL Version 3/4 Foundation * CompTia A+ Certification * Microsoft Windows 7/10 training and certification If you have the skill required, please apply now In applying for this position, you consent to your personal data being shared with the specified employer and for your details to remain with GTS for as long as is necessary to process your application. See our Privacy Notice for full information Global Technology Solutions is acting as an Employment Business in relation to this vacancy
Job title: Presales Solution Engineer _ Mandarin speaking Location: Reading Overview: If you are enthusiastic about the renewable energy generation, this may be the opportunity you've been looking for. As a presales solution manager, you will be responsible for technical pre-sales of our industry leading solar PV inverter and ESS solution in the UK market. You will be an integral part of a rapidly growing team within a leading international organisation to establish, develop and close business opportunities. What you will do: Conduct technical sales routine works, including produce solution design and quotation, processing purchase order, supporting product demonstration and proof-of-concept test, etc. Take bidding responsibility as a technical lead to answer RFx, producing technical proposal, generating product solution quotation, presenting technical and commercial proposals, preparing technical related contractual clauses. Lead Go-To-Market activities to launch new product and solution into UK market, promote solar PV inverter and ESS solution to key distributors and installers by regularly delivering technical workshops and presentation. Identify client's key technical requirements and be able to drive and coordinate with internal product management, R&D, engineering team and marketing teams to ensure that these requirements are implemented in the product roadmap. Collect and analyse market and industry trend information and produce insight of latest regulation and technology development. Support account team to enhance customer relationships, to seek out, identify, develop and close business opportunities within designated customers. The ideal candidate: Good knowledge of solar PV inverters and Energy Storage System functionality, BOS and system with also strong commercial sales knowledge. 2+ years of solar power generation industry experience, hands-on experience on solar PV inverter and ESS design and installation is desirable. Product management skills: producing product & market promotion document, performing competition analysis, creating presentations of product features and benefits University degree on power electronics, electric & electronic engineering or similar subject is preferred. Communication & Learning skills: Team working spirit, self-motivated, great time-management skill, acting as a communication hub on product & solution-related matters. Combination of presenting, influencing, negotiating and relationship building skills to achieve product & solution sales success. Learning and adapting capability: learning quickly and forwardly, curiosities about new things. Others: Willingness to travel domestic on a regular basis, up to 50% travel. Occasionally international travel is required. Fluent command of written and spoken English. Chinese/Mandarin speaking is required. Project People is acting as an Employment Business in relation to this vacancy.
25/04/2024
Project-based
Job title: Presales Solution Engineer _ Mandarin speaking Location: Reading Overview: If you are enthusiastic about the renewable energy generation, this may be the opportunity you've been looking for. As a presales solution manager, you will be responsible for technical pre-sales of our industry leading solar PV inverter and ESS solution in the UK market. You will be an integral part of a rapidly growing team within a leading international organisation to establish, develop and close business opportunities. What you will do: Conduct technical sales routine works, including produce solution design and quotation, processing purchase order, supporting product demonstration and proof-of-concept test, etc. Take bidding responsibility as a technical lead to answer RFx, producing technical proposal, generating product solution quotation, presenting technical and commercial proposals, preparing technical related contractual clauses. Lead Go-To-Market activities to launch new product and solution into UK market, promote solar PV inverter and ESS solution to key distributors and installers by regularly delivering technical workshops and presentation. Identify client's key technical requirements and be able to drive and coordinate with internal product management, R&D, engineering team and marketing teams to ensure that these requirements are implemented in the product roadmap. Collect and analyse market and industry trend information and produce insight of latest regulation and technology development. Support account team to enhance customer relationships, to seek out, identify, develop and close business opportunities within designated customers. The ideal candidate: Good knowledge of solar PV inverters and Energy Storage System functionality, BOS and system with also strong commercial sales knowledge. 2+ years of solar power generation industry experience, hands-on experience on solar PV inverter and ESS design and installation is desirable. Product management skills: producing product & market promotion document, performing competition analysis, creating presentations of product features and benefits University degree on power electronics, electric & electronic engineering or similar subject is preferred. Communication & Learning skills: Team working spirit, self-motivated, great time-management skill, acting as a communication hub on product & solution-related matters. Combination of presenting, influencing, negotiating and relationship building skills to achieve product & solution sales success. Learning and adapting capability: learning quickly and forwardly, curiosities about new things. Others: Willingness to travel domestic on a regular basis, up to 50% travel. Occasionally international travel is required. Fluent command of written and spoken English. Chinese/Mandarin speaking is required. Project People is acting as an Employment Business in relation to this vacancy.
Job Title: Head of Production (Water Industry) Location: Green Lane, Walsall or Fulbourn Road, Cambridge (Hybrid - 3dpw in office location) Team : 3 direct reports, total team size 64 employees. Package: To 75k DOE + Company Car/Allowance + Bonus to 10% Travel: Frequent travel to Production sites including Cambridge and Hampton Loade Step into a pivotal role as our Head of Production and lead our passionate production teams to deliver pristine drinking water to communities across South Staffs and Cambridge. Drive transformative strategies that address industry challenges while championing our unwavering commitment to exceptional quality, safety, and environmental stewardship. This influential senior leadership position empowers you to oversee the day-to-day operations of water production and storage, ensuring a reliable and continuous water supply for all. Join us in making a meaningful impact-providing clean, safe water to enhance lives and sustain our communities. About us: At South Staffs Water, we deliver clean and reliable water supplies to around 1.7 million customers within the South Staffs and Cambridge regions. As a water only Company, providing clean, healthy water 24 hours a day, 365 days a year is at the very heart of what we do and that's where you come in. About the role: • Champion Human Organisation Performance (HOP) principles to drive health and safety performance improvements to mitigate critical risk / hazards. • Deliver water quality compliance risk index (CRI) outcome delivery incentive (ODI). • Deliver annual unplanned interruption outcome delivery incentive (ODI). • Deliver maintenance, compliance, and team activities within annual operating expenditure budgets. • Continuous employee engagement, staff retention and team development. The key deliverables: • Effective leadership of Production teams across both operating regions • Management and implementation of industry leading Health & Safety standards associated with all operational staff and sites. • Providing direction, strategies and tracking operational performance to ensure compliance with Defra, EA, HSE, DWI standards. • Liaising with external bodies, auditors, review bodies and regulators • Evaluation of key business processes to ensure internal controls and risk measures are effective. • Ensuring sufficient competent staff are in place and that training is evaluated and maintained at the required standard. • Effectively managing budgets for operational and capital spend • Developing strategies and tactical plans for the risk-based optimisation of maintenance and reactive interventions • Developing strategies for the management of interventions to balance the operational risks of failure. • Overall accountability for Competent Operator Scheme compliance and assurance. • Responsible for water quality compliance risk index (CRI) outcome delivery incentive (ODI). • Being part of emergency/incident standby rota. What you'll need: • Experience of Production leadership roles in a Water/Energy or similar environment • The ability to think strategically, make decisions, and set priorities. • Ability to lead, develop and motivate distributed teams in an agile environment. • Demonstrate well-honed emotional intelligence and communication skills, able to influence and build effective relationships across a range of internal and external stakeholders and act as an ambassador for the business. • Experience of managing operating and capital budgets is essential. • Demonstrate the ability to engage with internal and external stakeholders at a senior level. • Educated to degree level or equivalent experience • NEBOSH Diploma or NVQ Level 5 Diploma in H&S desired. • Hold or working towards Chartership of an Institution desired • Must hold a full UK Driving Licence. What you'll get in return: • Basic salary to £75k DOE • Bonus up to 10% • Car/Car Allowance • Matched pension contributions • Employee assistance and wellbeing programme • Private Health • Retail discounts • On-site gym • On-site nursery
25/04/2024
Full time
Job Title: Head of Production (Water Industry) Location: Green Lane, Walsall or Fulbourn Road, Cambridge (Hybrid - 3dpw in office location) Team : 3 direct reports, total team size 64 employees. Package: To 75k DOE + Company Car/Allowance + Bonus to 10% Travel: Frequent travel to Production sites including Cambridge and Hampton Loade Step into a pivotal role as our Head of Production and lead our passionate production teams to deliver pristine drinking water to communities across South Staffs and Cambridge. Drive transformative strategies that address industry challenges while championing our unwavering commitment to exceptional quality, safety, and environmental stewardship. This influential senior leadership position empowers you to oversee the day-to-day operations of water production and storage, ensuring a reliable and continuous water supply for all. Join us in making a meaningful impact-providing clean, safe water to enhance lives and sustain our communities. About us: At South Staffs Water, we deliver clean and reliable water supplies to around 1.7 million customers within the South Staffs and Cambridge regions. As a water only Company, providing clean, healthy water 24 hours a day, 365 days a year is at the very heart of what we do and that's where you come in. About the role: • Champion Human Organisation Performance (HOP) principles to drive health and safety performance improvements to mitigate critical risk / hazards. • Deliver water quality compliance risk index (CRI) outcome delivery incentive (ODI). • Deliver annual unplanned interruption outcome delivery incentive (ODI). • Deliver maintenance, compliance, and team activities within annual operating expenditure budgets. • Continuous employee engagement, staff retention and team development. The key deliverables: • Effective leadership of Production teams across both operating regions • Management and implementation of industry leading Health & Safety standards associated with all operational staff and sites. • Providing direction, strategies and tracking operational performance to ensure compliance with Defra, EA, HSE, DWI standards. • Liaising with external bodies, auditors, review bodies and regulators • Evaluation of key business processes to ensure internal controls and risk measures are effective. • Ensuring sufficient competent staff are in place and that training is evaluated and maintained at the required standard. • Effectively managing budgets for operational and capital spend • Developing strategies and tactical plans for the risk-based optimisation of maintenance and reactive interventions • Developing strategies for the management of interventions to balance the operational risks of failure. • Overall accountability for Competent Operator Scheme compliance and assurance. • Responsible for water quality compliance risk index (CRI) outcome delivery incentive (ODI). • Being part of emergency/incident standby rota. What you'll need: • Experience of Production leadership roles in a Water/Energy or similar environment • The ability to think strategically, make decisions, and set priorities. • Ability to lead, develop and motivate distributed teams in an agile environment. • Demonstrate well-honed emotional intelligence and communication skills, able to influence and build effective relationships across a range of internal and external stakeholders and act as an ambassador for the business. • Experience of managing operating and capital budgets is essential. • Demonstrate the ability to engage with internal and external stakeholders at a senior level. • Educated to degree level or equivalent experience • NEBOSH Diploma or NVQ Level 5 Diploma in H&S desired. • Hold or working towards Chartership of an Institution desired • Must hold a full UK Driving Licence. What you'll get in return: • Basic salary to £75k DOE • Bonus up to 10% • Car/Car Allowance • Matched pension contributions • Employee assistance and wellbeing programme • Private Health • Retail discounts • On-site gym • On-site nursery
Senior Applications Engineer (Automotive & Defence) - RL7365 Salary Competitive Benefits Excellent Benefits Location Paris The Client Curo are partnering with a Global Company who deliver their B2B Customers cutting-edge technology. Their automated test and assurance solutions accelerate technology development in the lab, and ensure new products and services perform in the real world. Their innovative portfolio of products and services address the test, assurance, and automation challenges of a new generation of technologies: 5G, SD-WAN, Cloud, Autonomous Vehicles and beyond. The company designs, manufactures, and supplies advanced satellite navigation test and simulation systems, many of which comprise radio frequency signal generators and computer systems running complex application software; all designed in-house. The Candidate The successful candidate will have industry experience with Positioning, Navigation & Timing (PNT)/Global navigation satellite systems (GNSS), or similar wireless technologies including test methodology and analysis skills. The role requires a confident communicator, who has the ability to explain and present technical solutions and the benefits they provide to the organisations clients in the Defence and Automotive space. We are looking for a driver, to facilitate client visits. The Role As an Applications Engineer, you would be focusing predominantly on the military and automotive market. Reporting into the professional services team based in the UK, you will be responsible for assisting the BD teams in providing technical pre-sales and apps support in a timely fashion based on the opportunity and complexity at hand. Whilst working closely with customers it would be expected of you to build a relationship with the customer, develop deep understanding of their use case and provide feedback back to the Professional Services team and wider Business Unit. Some elements of delivering Professional Services mostly in EMEA could also be part of the role. You will have a close working relationship with peers in Sales, Global Services, and Business Development. In addition, the role will be hybrid with occasional visits to the organisations UK office in Devon and customer site locations, particularly across the EMEA sector as needed. Key Duties Provide technical and applications support primarily in pre-sales but also in post-sales situations. Engage in complex technical discussions with customers to understand their needs. Utilize deep knowledge of the companys products and services to align appropriate solutions based on client needs. Help design solutions and formulate responses to RFx, deliver POC/demos, and present solutions to customers. Liaise closely with engineering, professional services and tailored solutions teams to address complex customer requests. Grow depth of relationships with customers in the Defence and Automotive markets. Staying abreast of developments in GNSS/PNT technologies and test methodologies. Provide customer feedback on products, services, and process improvements as needed. Work closely with Sales Enablement team to generate application-specific materials. Requirements Bachelors degree in electrical engineering, Computer Science, or another technical field from an accredited university; or equivalent work experience. Significant experience of relevant industry experience with GNSS, PNT or similar technologies. Familiarity with test automation programming environments including LabView,Matlab desirable. Self-motivated team player with proven problem-solving skills. Experience in a customer-facing role is preferred. Ability to communicate technical material clearly, both verbally and in writing. Ability to work closely with other people to solve challenging problems. Experience using GNSS Test Equipment and/or GNSS receivers is a plus. Travel may be required up to 25% To apply for this Senior Applications Engineer permanent job, please click the button below and submit your latest CV. Curo Services endeavours to respond to all applications, however this may not always be possible during periods of high volume. Thank you for your patience. Curo Services is a trading name of Curo Resourcing Ltd and acts as an Employment Business for contract and temporary recruitment as well as an Employment Agency in relation to permanent vacancies.
25/04/2024
Full time
Senior Applications Engineer (Automotive & Defence) - RL7365 Salary Competitive Benefits Excellent Benefits Location Paris The Client Curo are partnering with a Global Company who deliver their B2B Customers cutting-edge technology. Their automated test and assurance solutions accelerate technology development in the lab, and ensure new products and services perform in the real world. Their innovative portfolio of products and services address the test, assurance, and automation challenges of a new generation of technologies: 5G, SD-WAN, Cloud, Autonomous Vehicles and beyond. The company designs, manufactures, and supplies advanced satellite navigation test and simulation systems, many of which comprise radio frequency signal generators and computer systems running complex application software; all designed in-house. The Candidate The successful candidate will have industry experience with Positioning, Navigation & Timing (PNT)/Global navigation satellite systems (GNSS), or similar wireless technologies including test methodology and analysis skills. The role requires a confident communicator, who has the ability to explain and present technical solutions and the benefits they provide to the organisations clients in the Defence and Automotive space. We are looking for a driver, to facilitate client visits. The Role As an Applications Engineer, you would be focusing predominantly on the military and automotive market. Reporting into the professional services team based in the UK, you will be responsible for assisting the BD teams in providing technical pre-sales and apps support in a timely fashion based on the opportunity and complexity at hand. Whilst working closely with customers it would be expected of you to build a relationship with the customer, develop deep understanding of their use case and provide feedback back to the Professional Services team and wider Business Unit. Some elements of delivering Professional Services mostly in EMEA could also be part of the role. You will have a close working relationship with peers in Sales, Global Services, and Business Development. In addition, the role will be hybrid with occasional visits to the organisations UK office in Devon and customer site locations, particularly across the EMEA sector as needed. Key Duties Provide technical and applications support primarily in pre-sales but also in post-sales situations. Engage in complex technical discussions with customers to understand their needs. Utilize deep knowledge of the companys products and services to align appropriate solutions based on client needs. Help design solutions and formulate responses to RFx, deliver POC/demos, and present solutions to customers. Liaise closely with engineering, professional services and tailored solutions teams to address complex customer requests. Grow depth of relationships with customers in the Defence and Automotive markets. Staying abreast of developments in GNSS/PNT technologies and test methodologies. Provide customer feedback on products, services, and process improvements as needed. Work closely with Sales Enablement team to generate application-specific materials. Requirements Bachelors degree in electrical engineering, Computer Science, or another technical field from an accredited university; or equivalent work experience. Significant experience of relevant industry experience with GNSS, PNT or similar technologies. Familiarity with test automation programming environments including LabView,Matlab desirable. Self-motivated team player with proven problem-solving skills. Experience in a customer-facing role is preferred. Ability to communicate technical material clearly, both verbally and in writing. Ability to work closely with other people to solve challenging problems. Experience using GNSS Test Equipment and/or GNSS receivers is a plus. Travel may be required up to 25% To apply for this Senior Applications Engineer permanent job, please click the button below and submit your latest CV. Curo Services endeavours to respond to all applications, however this may not always be possible during periods of high volume. Thank you for your patience. Curo Services is a trading name of Curo Resourcing Ltd and acts as an Employment Business for contract and temporary recruitment as well as an Employment Agency in relation to permanent vacancies.