Structural Mass Properties Engineer Contract Outside IR35 12 months Hybrid, 3 days per week in Bristol office Start ASAP Job Summary We are seeking a Structural Mass Properties Engineer with expertise in weight analysis and management for aerospace components. The role involves optimizing mass properties and contributing to design and production processes to achieve efficient and effective solutions. Required Qualifications & Skills * Bachelor's degree or equivalent in Mechanical or Aerospace Engineering is preferred. * A minimum of 4-8 years of professional experience in mass properties analysis, weight optimization, design collaboration, and related fields. Key Responsibilities * Provide detailed calculations of mass properties, including weight, center of gravity, and inertia, for components and assemblies. * Set and track weight targets at the detailed part and assembly levels while identifying risks and opportunities. * Perform actual measurements of weight and balance for components and assemblies to ensure compliance with targets. * Support design reviews and weight optimization efforts throughout the design and manufacturing process. * Collaborate with multidisciplinary teams to challenge and optimize designs for improved weight efficiency. Desired Skills & Experience * Experience in working with structural components and engineering bills of materials (BOM). * Proficiency in industry-standard design software such as CATIA V5. * Strong background in detailed design, manufacturability, and sustaining engineering. * Familiarity with weight tracking methodologies and tools for aerospace applications. Please click apply to begin your application! CBSbutler is operating and advertising as an Employment Agency for permanent positions and as an Employment Business for interim/contract/temporary positions. CBSbutler is an Equal Opportunities employer and we encourage applicants from all backgrounds.
14/01/2025
Project-based
Structural Mass Properties Engineer Contract Outside IR35 12 months Hybrid, 3 days per week in Bristol office Start ASAP Job Summary We are seeking a Structural Mass Properties Engineer with expertise in weight analysis and management for aerospace components. The role involves optimizing mass properties and contributing to design and production processes to achieve efficient and effective solutions. Required Qualifications & Skills * Bachelor's degree or equivalent in Mechanical or Aerospace Engineering is preferred. * A minimum of 4-8 years of professional experience in mass properties analysis, weight optimization, design collaboration, and related fields. Key Responsibilities * Provide detailed calculations of mass properties, including weight, center of gravity, and inertia, for components and assemblies. * Set and track weight targets at the detailed part and assembly levels while identifying risks and opportunities. * Perform actual measurements of weight and balance for components and assemblies to ensure compliance with targets. * Support design reviews and weight optimization efforts throughout the design and manufacturing process. * Collaborate with multidisciplinary teams to challenge and optimize designs for improved weight efficiency. Desired Skills & Experience * Experience in working with structural components and engineering bills of materials (BOM). * Proficiency in industry-standard design software such as CATIA V5. * Strong background in detailed design, manufacturability, and sustaining engineering. * Familiarity with weight tracking methodologies and tools for aerospace applications. Please click apply to begin your application! CBSbutler is operating and advertising as an Employment Agency for permanent positions and as an Employment Business for interim/contract/temporary positions. CBSbutler is an Equal Opportunities employer and we encourage applicants from all backgrounds.
Aircraft Structural Analysis Engineer Outside IR35 12 months Hybrid, 3 days per week in the Bristol office Start ASAP Preferred Qualifications: Bachelor's degree or higher in Aeronautical or Mechanical Engineering or equivalent. Minimum of 5 years of experience in stress analysis for primary and secondary aircraft structures, including both composite and metallic materials. Key Responsibilities: Conduct stress analysis on metallic and composite structural components. Collaborate with teams to review and analyze structural modifications for compliance with relevant aviation regulations (eg, FAR, CAR). Develop and refine Global Finite Element Models (GFEM) for load analysis. Create Detailed Finite Element Models (DFEM) for sizing complex components. Utilize classical methods to develop analysis templates for structural evaluation. Review and interpret technical results, presenting findings during design review stages such as Preliminary Design Reviews (PDR) and Critical Design Reviews (CDR). Ensure high-quality deliverables with a focus on on-time project completion. Facilitate project review meetings to share insights, lessons learned, and best practices to enhance team output. Offer innovative solutions for addressing field-related structural issues. Drive process optimization by developing automation tools for analysis workflows. Support product development by addressing complex CAE challenges and validating design modifications using FEA. Exhibit strong technical expertise, interpersonal communication, and problem-solving skills. Required Technical Expertise: Proficient in structural analysis tools such as MSC Nastran/Patran, HyperMesh, or similar platforms. Skilled in creating 2D and 3D finite element models of varying complexity (eg, plate, hexahedral, and tetrahedral elements). Experience with linear and non-linear static stress analysis, including geometric, material, and contact non-linearities. Ability to modify bulk data files for MSC Nastran, debug errors, and manage batch analysis for multiple datasets. Competent in performing hand calculations for structural failure modes and proposing suitable methodologies. Familiarity with strength, stability, and durability requirements for structural components. Capable of conducting fatigue and damage tolerance (F&DT) analyses. Experience in Scripting and automation tools, including modifying TCL macros, developing MS Excel templates, and working with VBA. Expertise in developing and updating finite element models for complex metallic and composite structures. Knowledge of processes and methodologies aligned with leading aerospace programs (eg, Airbus, Boeing, Bombardier, or defense sectors). Preferred Skills and Experience: Proficiency in Scripting languages such as Python, TCL/Tk, Mathcad, or VBA. Basic knowledge of CAD tools. Familiarity with the product development life cycle for aircraft components, including design, analysis, and manufacturing stages. Experience with PLM tools like Teamcenter or Windchill. Familiarity with ISAMI or other specialized tools used in aerospace structural analysis. Stress signatory experience is a significant advantage. Please click apply to begin your application! CBSbutler is operating and advertising as an Employment Agency for permanent positions and as an Employment Business for interim/contract/temporary positions. CBSbutler is an Equal Opportunities employer and we encourage applicants from all backgrounds.
13/01/2025
Project-based
Aircraft Structural Analysis Engineer Outside IR35 12 months Hybrid, 3 days per week in the Bristol office Start ASAP Preferred Qualifications: Bachelor's degree or higher in Aeronautical or Mechanical Engineering or equivalent. Minimum of 5 years of experience in stress analysis for primary and secondary aircraft structures, including both composite and metallic materials. Key Responsibilities: Conduct stress analysis on metallic and composite structural components. Collaborate with teams to review and analyze structural modifications for compliance with relevant aviation regulations (eg, FAR, CAR). Develop and refine Global Finite Element Models (GFEM) for load analysis. Create Detailed Finite Element Models (DFEM) for sizing complex components. Utilize classical methods to develop analysis templates for structural evaluation. Review and interpret technical results, presenting findings during design review stages such as Preliminary Design Reviews (PDR) and Critical Design Reviews (CDR). Ensure high-quality deliverables with a focus on on-time project completion. Facilitate project review meetings to share insights, lessons learned, and best practices to enhance team output. Offer innovative solutions for addressing field-related structural issues. Drive process optimization by developing automation tools for analysis workflows. Support product development by addressing complex CAE challenges and validating design modifications using FEA. Exhibit strong technical expertise, interpersonal communication, and problem-solving skills. Required Technical Expertise: Proficient in structural analysis tools such as MSC Nastran/Patran, HyperMesh, or similar platforms. Skilled in creating 2D and 3D finite element models of varying complexity (eg, plate, hexahedral, and tetrahedral elements). Experience with linear and non-linear static stress analysis, including geometric, material, and contact non-linearities. Ability to modify bulk data files for MSC Nastran, debug errors, and manage batch analysis for multiple datasets. Competent in performing hand calculations for structural failure modes and proposing suitable methodologies. Familiarity with strength, stability, and durability requirements for structural components. Capable of conducting fatigue and damage tolerance (F&DT) analyses. Experience in Scripting and automation tools, including modifying TCL macros, developing MS Excel templates, and working with VBA. Expertise in developing and updating finite element models for complex metallic and composite structures. Knowledge of processes and methodologies aligned with leading aerospace programs (eg, Airbus, Boeing, Bombardier, or defense sectors). Preferred Skills and Experience: Proficiency in Scripting languages such as Python, TCL/Tk, Mathcad, or VBA. Basic knowledge of CAD tools. Familiarity with the product development life cycle for aircraft components, including design, analysis, and manufacturing stages. Experience with PLM tools like Teamcenter or Windchill. Familiarity with ISAMI or other specialized tools used in aerospace structural analysis. Stress signatory experience is a significant advantage. Please click apply to begin your application! CBSbutler is operating and advertising as an Employment Agency for permanent positions and as an Employment Business for interim/contract/temporary positions. CBSbutler is an Equal Opportunities employer and we encourage applicants from all backgrounds.
Thermal Engineering International
Islington, London
This is a Senior Engineering position mainly focused on project thermal and mechanical design & engineering for project activities. The duties for this position involve reviewing customer specifications, performing mechanical design calculations and associated analysis (including numeric analysis/FEA), preparing, checking and/or reviewing manufacturing drawings as well as presenting, documenting and updating of these activities to others as necessary. This position will require supporting all design engineering activities (ex. proposal and/or project level) when the need arises. The position may require some degree of interaction with internal personnel in sales, contracts, project management, proposal engineering, procurement, estimating, and manufacturing. The position must consider minimizing risk and exposure to the Company while working with all team members to achieve the sales and execution goals and margins. The position also involves the development of standards to facilitate the thermal and mechanical design and drafting of various types of Heat Exchangers for the ASME Section III Program. JOB DUTIES/RESPONSIBILITIES : Review contract requirements, client technical specifications, sales package and all design data. Interpret and comprehend all pertinent information for various types of nuclear power plant heat exchangers for the development of competitive and state of the art designs. Perform mechanical and structural calculations (including numeric analysis/FEA), prepare design details, generate design breakdowns, produce fabrication drawings and bills of materials, analyze foundation loading, perform relevant code calculations, prepare performance curves and operating/instruction manuals, and complete all required analysis for heat exchangers per HEI, ASME, TEMA, PED, and any other US and international standards, as necessary, using in-house proprietary software and commercial programs, and prepare any manual calculations for unconventional applications. Coordinate with other department specialty engineers as required. Develop required general arrangement drawings, fabrication details, assembly drawings, P&IDs, and Bill of Material drawings. Be capable of reviewing and guiding designers and/or staff as required. Maintain project Job Folders on engineering server and company document control system. Review fabrication drawings for conformity to client specification and applicable codes and standards. Issue final Drawings/Document Packages to Workshops or clients. Attend, participate and/or facilitate project kick-off meetings for new projects, and any other project review meetings when necessary. Assist with preparation of technical comments and technical follow-up with customers during proposal and project execution. Interact with Project Engineering, Engineering Manager, other Design/Drafting Staff, Sales/Proposal group and Workshops. Participate in (virtual and/or remote) internal project meetings, engineering department meetings, supplier / subcontractor reviews and conference calls with customer, as required. Complete mechanical design and required mechanical analysis.Support discussions on quality assurance requirements and construction materials with the external customer, as well as, internal customers such as engineering, estimating, supply management and global sourcing departments. Develop and implementation of new ideas and design concepts to increase competitiveness through productivity and cost reduction methods. Check the detailed drawings of vendor accessory equipment. Furnish comments to the sub-vendors of the ancillary equipment. Participate in meetings to review the progress against the management plan and discuss potential delays or schedule improvement. Notify the Project Manager of contract changes that result in price additions or deducts, scope variations that could have an impact on cost, quality, or delivery schedule. Assist the proposal effort as needed. Develop and expand in-house design automation programs to facilitate mechanical design and drafting of various types of Heat Exchangers. Design output of this automation program, including bills of materials, will be linked to an estimating program for sales/proposal support. Perform onsite equipment inspections and create reports documenting findings. Development and publish comprehensive engineering and design standards for all Section III product offerings. Office location Greater London. EDUCATION: Bachelor s degree in Mechanical, Civil/Structural, Aerospace, Nuclear or Chemical Engineering is required. Master s degree in Mechanical, Civil/Structural, Aerospace, Nuclear or Chemical Engineering is a plus. EXPERIENCE: A minimum of five (5) years of experience in engineering of ASME Section III and/or VIII Pressure Vessels and/or Heat Exchangers in power or Process/Oil & Gas market applications. A minimum of two (2) year of experience in engineering of ASME Section III Pressure Vessels and/or Heat Exchangers in the nuclear power market applications. Directly related work experience in designing various types of pressure vessels and heat exchangers in accordance with ASME Section VIII-1 &2 and ASME Section III and HEI Standards. Working knowledge of ASME B31.1, AWS, and AISC is a plus. Must be able to analyze data and write technical reports. Must have the ability to schedule, manage, prioritize, and execute assignments with accuracy. Must possess strong interpersonal and communication skills. Must be organized and detail oriented under all circumstances. Must have the drive, desire and self-conscience to grow from learning. CERTIFICATES & LICENSURES: Chartered Engineer status is preferred. Qualification requirements of a Certifying Engineer as defined within ASME Section III desireable. COMPUTER SKILLS: Advanced knowledge of mechanical calculations and design programs: Intergraph CADWorx / PV Elite, Codeware /Compress, RCS, HTRI or other industry recognized design software. Advanced knowledge of Microsoft Products: Outlook, Teams, Word, Excel & Power Point. Proficient in FEA: Ansys, SolidWorks Simulation or Autodesk Inventor Nastran. Knowledge of CFD is a plus: Ansys Fluent. Proficient in Drafting: AutoCAD, Inventor or Solid Works. Experience in Programming: Excel, Visual Basic or Others is a plus. Position Title: Senior Design Engineer ASME Section III Department: Engineering Reports to: Director of Engineering Location: Greater London / Southeast Amount of Travel Required: 10% NOTE: This description does not describe all the responsibilities inherent in this position. It provides as much detail as to distinguish this position from all other positions and establish guidelines for job expectations and the employee s ability to perform the position described. Supervisors may assign additional functions and requirements as deemed appropriate. The Company reserves the right to change this description and/or assign tasks for the employee to perform as needed.
13/01/2025
Full time
This is a Senior Engineering position mainly focused on project thermal and mechanical design & engineering for project activities. The duties for this position involve reviewing customer specifications, performing mechanical design calculations and associated analysis (including numeric analysis/FEA), preparing, checking and/or reviewing manufacturing drawings as well as presenting, documenting and updating of these activities to others as necessary. This position will require supporting all design engineering activities (ex. proposal and/or project level) when the need arises. The position may require some degree of interaction with internal personnel in sales, contracts, project management, proposal engineering, procurement, estimating, and manufacturing. The position must consider minimizing risk and exposure to the Company while working with all team members to achieve the sales and execution goals and margins. The position also involves the development of standards to facilitate the thermal and mechanical design and drafting of various types of Heat Exchangers for the ASME Section III Program. JOB DUTIES/RESPONSIBILITIES : Review contract requirements, client technical specifications, sales package and all design data. Interpret and comprehend all pertinent information for various types of nuclear power plant heat exchangers for the development of competitive and state of the art designs. Perform mechanical and structural calculations (including numeric analysis/FEA), prepare design details, generate design breakdowns, produce fabrication drawings and bills of materials, analyze foundation loading, perform relevant code calculations, prepare performance curves and operating/instruction manuals, and complete all required analysis for heat exchangers per HEI, ASME, TEMA, PED, and any other US and international standards, as necessary, using in-house proprietary software and commercial programs, and prepare any manual calculations for unconventional applications. Coordinate with other department specialty engineers as required. Develop required general arrangement drawings, fabrication details, assembly drawings, P&IDs, and Bill of Material drawings. Be capable of reviewing and guiding designers and/or staff as required. Maintain project Job Folders on engineering server and company document control system. Review fabrication drawings for conformity to client specification and applicable codes and standards. Issue final Drawings/Document Packages to Workshops or clients. Attend, participate and/or facilitate project kick-off meetings for new projects, and any other project review meetings when necessary. Assist with preparation of technical comments and technical follow-up with customers during proposal and project execution. Interact with Project Engineering, Engineering Manager, other Design/Drafting Staff, Sales/Proposal group and Workshops. Participate in (virtual and/or remote) internal project meetings, engineering department meetings, supplier / subcontractor reviews and conference calls with customer, as required. Complete mechanical design and required mechanical analysis.Support discussions on quality assurance requirements and construction materials with the external customer, as well as, internal customers such as engineering, estimating, supply management and global sourcing departments. Develop and implementation of new ideas and design concepts to increase competitiveness through productivity and cost reduction methods. Check the detailed drawings of vendor accessory equipment. Furnish comments to the sub-vendors of the ancillary equipment. Participate in meetings to review the progress against the management plan and discuss potential delays or schedule improvement. Notify the Project Manager of contract changes that result in price additions or deducts, scope variations that could have an impact on cost, quality, or delivery schedule. Assist the proposal effort as needed. Develop and expand in-house design automation programs to facilitate mechanical design and drafting of various types of Heat Exchangers. Design output of this automation program, including bills of materials, will be linked to an estimating program for sales/proposal support. Perform onsite equipment inspections and create reports documenting findings. Development and publish comprehensive engineering and design standards for all Section III product offerings. Office location Greater London. EDUCATION: Bachelor s degree in Mechanical, Civil/Structural, Aerospace, Nuclear or Chemical Engineering is required. Master s degree in Mechanical, Civil/Structural, Aerospace, Nuclear or Chemical Engineering is a plus. EXPERIENCE: A minimum of five (5) years of experience in engineering of ASME Section III and/or VIII Pressure Vessels and/or Heat Exchangers in power or Process/Oil & Gas market applications. A minimum of two (2) year of experience in engineering of ASME Section III Pressure Vessels and/or Heat Exchangers in the nuclear power market applications. Directly related work experience in designing various types of pressure vessels and heat exchangers in accordance with ASME Section VIII-1 &2 and ASME Section III and HEI Standards. Working knowledge of ASME B31.1, AWS, and AISC is a plus. Must be able to analyze data and write technical reports. Must have the ability to schedule, manage, prioritize, and execute assignments with accuracy. Must possess strong interpersonal and communication skills. Must be organized and detail oriented under all circumstances. Must have the drive, desire and self-conscience to grow from learning. CERTIFICATES & LICENSURES: Chartered Engineer status is preferred. Qualification requirements of a Certifying Engineer as defined within ASME Section III desireable. COMPUTER SKILLS: Advanced knowledge of mechanical calculations and design programs: Intergraph CADWorx / PV Elite, Codeware /Compress, RCS, HTRI or other industry recognized design software. Advanced knowledge of Microsoft Products: Outlook, Teams, Word, Excel & Power Point. Proficient in FEA: Ansys, SolidWorks Simulation or Autodesk Inventor Nastran. Knowledge of CFD is a plus: Ansys Fluent. Proficient in Drafting: AutoCAD, Inventor or Solid Works. Experience in Programming: Excel, Visual Basic or Others is a plus. Position Title: Senior Design Engineer ASME Section III Department: Engineering Reports to: Director of Engineering Location: Greater London / Southeast Amount of Travel Required: 10% NOTE: This description does not describe all the responsibilities inherent in this position. It provides as much detail as to distinguish this position from all other positions and establish guidelines for job expectations and the employee s ability to perform the position described. Supervisors may assign additional functions and requirements as deemed appropriate. The Company reserves the right to change this description and/or assign tasks for the employee to perform as needed.
Design Engineer - Aircraft Structures for Advanced Aerial Vehicles Contract Outside IR35 12 months Hybrid, 3 days per week in Bristol office Start ASAP Job Summary: * Seeking an experienced professional in structural design for aircraft, specializing in airframe development. * Requires a degree in Mechanical or Aerospace Engineering, with 6-10 years of relevant experience. * Experience with advanced aerial vehicle design, build, and testing is a significant advantage. Role Description: * Work on the design and development of airframe structures for an advanced aerial vehicle prototype. * Provide comprehensive design services, including the preparation of composite and metallic structural definitions for details and assemblies. * Deliver design and design-checking expertise on a project basis, ensuring weekly deliverables align with engineering standards. * Contribute to creating model-based definitions within a 3D digital mock-up environment. * Collaborate with systems integration teams to maintain compatibility and ensure structural designs accommodate system routing needs. * Operate as part of a cohesive design team, reporting to a designated Lead Engineer and the broader Program Design Lead. * Hybrid work arrangements are available, though occasional physical attendance for critical meetings and reviews at client sites will be required. Key Responsibilities: * Define and refine design solutions for new and modified components (composite and metallic) with consideration for cost, weight, manufacturability, serviceability, and performance. * Provide evidence of compliance with technical and customer specifications. * Prepare detailed engineering drawings and data required for manufacturing and customer submissions. * Support manufacturing and certification processes by producing engineering change notices (ECNs) as needed. * Ensure high-quality deliverables, meeting both internal and customer expectations. Essential Skills: * Extensive experience in structural design for aerospace applications, particularly in airframe development (metallic and composite structures). * Strong knowledge of aero structures, including wings, fuselage, and empennage. * Proficiency in 3D design and analysis tools (eg, CATIA V5). * Understanding of geometric dimensioning and tolerancing (GD&T) and tolerance stack-up analysis. * Familiarity with composite and metallic materials and their manufacturing processes. * Customer-focused, with excellent verbal and written communication skills in English. * Ability to manage tight deadlines and deliver high-quality results under pressure. Preferred Skills: * Experience with Dassault 3D Experience. * Proficiency in PLM systems such as Windchill. Please click apply to begin your application. CBSbutler is operating and advertising as an Employment Agency for permanent positions and as an Employment Business for interim/contract/temporary positions. CBSbutler is an Equal Opportunities employer and we encourage applicants from all backgrounds.
10/01/2025
Project-based
Design Engineer - Aircraft Structures for Advanced Aerial Vehicles Contract Outside IR35 12 months Hybrid, 3 days per week in Bristol office Start ASAP Job Summary: * Seeking an experienced professional in structural design for aircraft, specializing in airframe development. * Requires a degree in Mechanical or Aerospace Engineering, with 6-10 years of relevant experience. * Experience with advanced aerial vehicle design, build, and testing is a significant advantage. Role Description: * Work on the design and development of airframe structures for an advanced aerial vehicle prototype. * Provide comprehensive design services, including the preparation of composite and metallic structural definitions for details and assemblies. * Deliver design and design-checking expertise on a project basis, ensuring weekly deliverables align with engineering standards. * Contribute to creating model-based definitions within a 3D digital mock-up environment. * Collaborate with systems integration teams to maintain compatibility and ensure structural designs accommodate system routing needs. * Operate as part of a cohesive design team, reporting to a designated Lead Engineer and the broader Program Design Lead. * Hybrid work arrangements are available, though occasional physical attendance for critical meetings and reviews at client sites will be required. Key Responsibilities: * Define and refine design solutions for new and modified components (composite and metallic) with consideration for cost, weight, manufacturability, serviceability, and performance. * Provide evidence of compliance with technical and customer specifications. * Prepare detailed engineering drawings and data required for manufacturing and customer submissions. * Support manufacturing and certification processes by producing engineering change notices (ECNs) as needed. * Ensure high-quality deliverables, meeting both internal and customer expectations. Essential Skills: * Extensive experience in structural design for aerospace applications, particularly in airframe development (metallic and composite structures). * Strong knowledge of aero structures, including wings, fuselage, and empennage. * Proficiency in 3D design and analysis tools (eg, CATIA V5). * Understanding of geometric dimensioning and tolerancing (GD&T) and tolerance stack-up analysis. * Familiarity with composite and metallic materials and their manufacturing processes. * Customer-focused, with excellent verbal and written communication skills in English. * Ability to manage tight deadlines and deliver high-quality results under pressure. Preferred Skills: * Experience with Dassault 3D Experience. * Proficiency in PLM systems such as Windchill. Please click apply to begin your application. CBSbutler is operating and advertising as an Employment Agency for permanent positions and as an Employment Business for interim/contract/temporary positions. CBSbutler is an Equal Opportunities employer and we encourage applicants from all backgrounds.
JOB SUMMARY Provide technical support in the Engineering Services department for the Salem Power Uprate Project. The successful candidate will perform the duties as a Lead Responsible Engineer (LRE) for modifications needed to support the power uprate for Salem Units 1 and 2. An LRE is responsible for determining solutions, and then managing resources needed to prepare the applicable design deliverables. JOB RESPONSIBILITIES: Some specific Lead Responsible Engineer (LRE) duties would include: • Qualify for and fulfill the LRE role for the power uprate plant modifications and be accountable for the design "cradle to grave". • Establish modification scope, system performance requirements, and all testing requirements. • Perform Owners Acceptance Reviews for design analysis, modification packages, procurement, and specifications in accordance with plant procedures. • Manage technical supplier teams with respect cost, schedule, and quality. • Schedule and coordinate Engineering and station department resources to deliver and install required design change packages. • Interface with Project Manager to ensure that Engineering deliverables meet the overall project goals. • Provide field support during modification walkdowns, installation, testing and as-built verification. • Comply with regulatory requirements including 50.59, License Amendment Request preparation and any required supporting analysis. • Perform other assigned duties as determined by the Engineering Manager. • Assigned duties in the Emergency Response Organization Additional details necessary to perform job: • Availability for shift work during installation. • Meet Nuclear requirements for unescorted plant access. • Possess a valid US driver's license and maintain a satisfactory driving record. Job Specific Qualifications BASIC QUALIFICATIONS: • BS Degree in Mechanical, Civil, Controls or Engineering technical degree with 13+ years of experience performing Engineering work in a nuclear power plant or within the power generation industry. • Minimum of 7+ years of experience in mechanical design engineering PREFERRED QUALIFICATIONS : • Power uprate experience at a pressurized water reactor (PWR) • Prior Design Engineering configuration control qualification • Professional Engineering license (NJ or other state) PSEG is an equal opportunity employer, dedicated to a policy of non-discrimination in employment, including the hiring process, based on any legally protected characteristic. Legally protected characteristics include race, color, religion, national origin, sex, age, marital status, sexual orientation, disability or veteran status or any other characteristic protected by federal, state, or local law in locations where PSEG employs individuals.
10/01/2025
Full time
JOB SUMMARY Provide technical support in the Engineering Services department for the Salem Power Uprate Project. The successful candidate will perform the duties as a Lead Responsible Engineer (LRE) for modifications needed to support the power uprate for Salem Units 1 and 2. An LRE is responsible for determining solutions, and then managing resources needed to prepare the applicable design deliverables. JOB RESPONSIBILITIES: Some specific Lead Responsible Engineer (LRE) duties would include: • Qualify for and fulfill the LRE role for the power uprate plant modifications and be accountable for the design "cradle to grave". • Establish modification scope, system performance requirements, and all testing requirements. • Perform Owners Acceptance Reviews for design analysis, modification packages, procurement, and specifications in accordance with plant procedures. • Manage technical supplier teams with respect cost, schedule, and quality. • Schedule and coordinate Engineering and station department resources to deliver and install required design change packages. • Interface with Project Manager to ensure that Engineering deliverables meet the overall project goals. • Provide field support during modification walkdowns, installation, testing and as-built verification. • Comply with regulatory requirements including 50.59, License Amendment Request preparation and any required supporting analysis. • Perform other assigned duties as determined by the Engineering Manager. • Assigned duties in the Emergency Response Organization Additional details necessary to perform job: • Availability for shift work during installation. • Meet Nuclear requirements for unescorted plant access. • Possess a valid US driver's license and maintain a satisfactory driving record. Job Specific Qualifications BASIC QUALIFICATIONS: • BS Degree in Mechanical, Civil, Controls or Engineering technical degree with 13+ years of experience performing Engineering work in a nuclear power plant or within the power generation industry. • Minimum of 7+ years of experience in mechanical design engineering PREFERRED QUALIFICATIONS : • Power uprate experience at a pressurized water reactor (PWR) • Prior Design Engineering configuration control qualification • Professional Engineering license (NJ or other state) PSEG is an equal opportunity employer, dedicated to a policy of non-discrimination in employment, including the hiring process, based on any legally protected characteristic. Legally protected characteristics include race, color, religion, national origin, sex, age, marital status, sexual orientation, disability or veteran status or any other characteristic protected by federal, state, or local law in locations where PSEG employs individuals.
Job Summary Provide technical support in the Engineering Services department for the Salem Power Uprate Project. The successful candidate will perform the duties as a System/Commissioning Engineer for the power uprate for Salem Units 1 and 2. The engineer is responsible for sponsoring and implementing power uprate modifications. Job Responsibilities • Assess the required scope of work and explore various alternative solutions for required modifications. • Sponsor plant modifications through the plant approval process. • Fulfill the role of the system lead engineer for modifications. • Ensure adequate systems integration and fulfill the role of plant systems subject matter experts • Support changes to the Preventive maintenance and Surveillance Program • Identify Critical Spare parts • Support Operations and Maintenance technical procedural changes. • Prepare and/or support factory and plant startup testing • Interface with Project Manager to ensure that Engineering deliverables meet the overall project goals. • Provide field support during modification walkdowns, installation, testing and as-built verification. • Comply with regulatory requirements including 50.59, License Amendment Request preparation and any required supporting analysis. • Perform other assigned duties as determined by the Engineering Manager. • Assigned duties in the Emergency Response Organization Job Specific Qualifications Required: • BS Degree in Mechanical, Civil, Controls or related Engineering or related technical degree • 13 years of experience performing Engineering work in a nuclear power plant or related industry. • Minimum of 7 years of experience in mechanical system engineering. • Experience with power plant infrastructure facilities, power distribution. • Experience replacing components: MSR, HRSG, or feedwater heaters. • Valve CV / comparisons changes-pump internal work. • Experience with ASME B31.1 or ASME B31.7. • Availability for shift work during installation. • Must meet Nuclear requirements for unescorted plant access. • Must possess a valid US driver's license and maintain a satisfactory driving record. Desired: • Power uprate experience at a pressurized water reactor (PWR) • Thermal performance modeling and monitoring experience • Professional Engineering license (NJ or other state)
10/01/2025
Full time
Job Summary Provide technical support in the Engineering Services department for the Salem Power Uprate Project. The successful candidate will perform the duties as a System/Commissioning Engineer for the power uprate for Salem Units 1 and 2. The engineer is responsible for sponsoring and implementing power uprate modifications. Job Responsibilities • Assess the required scope of work and explore various alternative solutions for required modifications. • Sponsor plant modifications through the plant approval process. • Fulfill the role of the system lead engineer for modifications. • Ensure adequate systems integration and fulfill the role of plant systems subject matter experts • Support changes to the Preventive maintenance and Surveillance Program • Identify Critical Spare parts • Support Operations and Maintenance technical procedural changes. • Prepare and/or support factory and plant startup testing • Interface with Project Manager to ensure that Engineering deliverables meet the overall project goals. • Provide field support during modification walkdowns, installation, testing and as-built verification. • Comply with regulatory requirements including 50.59, License Amendment Request preparation and any required supporting analysis. • Perform other assigned duties as determined by the Engineering Manager. • Assigned duties in the Emergency Response Organization Job Specific Qualifications Required: • BS Degree in Mechanical, Civil, Controls or related Engineering or related technical degree • 13 years of experience performing Engineering work in a nuclear power plant or related industry. • Minimum of 7 years of experience in mechanical system engineering. • Experience with power plant infrastructure facilities, power distribution. • Experience replacing components: MSR, HRSG, or feedwater heaters. • Valve CV / comparisons changes-pump internal work. • Experience with ASME B31.1 or ASME B31.7. • Availability for shift work during installation. • Must meet Nuclear requirements for unescorted plant access. • Must possess a valid US driver's license and maintain a satisfactory driving record. Desired: • Power uprate experience at a pressurized water reactor (PWR) • Thermal performance modeling and monitoring experience • Professional Engineering license (NJ or other state)
Quality and Safety Engineer Stone, Staffordshire - Occasional Travel Competitive Salary PLEASE NOTE: Due to the nature of this role, you will be required to gain nuclear SC clearance, meaning you must be a British born citizen and hold no dual nationality. VIQU have partnered with a leading entity in operational technology and digital transformation. Operating in highly regulated and demanding industrial sectors, they have successfully executed pivotal projects across energy, renewables, water, and manufacturing domains. The Quality and Safety Engineer will play a key role in supporting operations by overseeing quality assurance and health and safety protocols across all areas of the business. Key duties include implementing and maintaining quality systems, conducting risk assessments, ensuring compliance with relevant standards, and developing safety policies and procedures. Additionally, the engineer will take part in audits, prepare reports, and work closely with both internal teams and external stakeholders to ensure safety and quality objectives are met. Occasional travel to company and client sites will be required to ensure regulatory adherence and process improvements. Required Expertise for the Quality and Safety Engineer: Strong background in Electrical and Mechanical engineering, with at least 5 years in a quality engineering role Experience in highly regulated industries such as nuclear, civil engineering, utilities, or welding In-depth knowledge of quality management systems (ISO 9001, 14001) and health & safety regulations (OHSAS 45001) Skilled in audits, regulatory compliance, risk assessments, and safety procedure development Ability to manage competing priorities in a fast-paced environment, with strong collaboration and communication skills Proficient in producing reports, metrics, and conducting incident investigations for senior management Willingness to travel for site visits and audits, with a full UK driving license and eligibility for SC clearance Familiarity with automation systems and functional safety standards ie ISO 27001 (desired) NEBOSH Diploma or equivalent safety qualification (desired) Degree-level education with relevant professional memberships eg, CQA, IOSH (desired) To discuss this exciting opportunity in more detail, please APPLY NOW. Alternatively, you can contact Katie Dark directly on (see below) . If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply). Quality and Safety Engineer Stone, Staffordshire - Occasional Travel Competitive Salary
10/01/2025
Full time
Quality and Safety Engineer Stone, Staffordshire - Occasional Travel Competitive Salary PLEASE NOTE: Due to the nature of this role, you will be required to gain nuclear SC clearance, meaning you must be a British born citizen and hold no dual nationality. VIQU have partnered with a leading entity in operational technology and digital transformation. Operating in highly regulated and demanding industrial sectors, they have successfully executed pivotal projects across energy, renewables, water, and manufacturing domains. The Quality and Safety Engineer will play a key role in supporting operations by overseeing quality assurance and health and safety protocols across all areas of the business. Key duties include implementing and maintaining quality systems, conducting risk assessments, ensuring compliance with relevant standards, and developing safety policies and procedures. Additionally, the engineer will take part in audits, prepare reports, and work closely with both internal teams and external stakeholders to ensure safety and quality objectives are met. Occasional travel to company and client sites will be required to ensure regulatory adherence and process improvements. Required Expertise for the Quality and Safety Engineer: Strong background in Electrical and Mechanical engineering, with at least 5 years in a quality engineering role Experience in highly regulated industries such as nuclear, civil engineering, utilities, or welding In-depth knowledge of quality management systems (ISO 9001, 14001) and health & safety regulations (OHSAS 45001) Skilled in audits, regulatory compliance, risk assessments, and safety procedure development Ability to manage competing priorities in a fast-paced environment, with strong collaboration and communication skills Proficient in producing reports, metrics, and conducting incident investigations for senior management Willingness to travel for site visits and audits, with a full UK driving license and eligibility for SC clearance Familiarity with automation systems and functional safety standards ie ISO 27001 (desired) NEBOSH Diploma or equivalent safety qualification (desired) Degree-level education with relevant professional memberships eg, CQA, IOSH (desired) To discuss this exciting opportunity in more detail, please APPLY NOW. Alternatively, you can contact Katie Dark directly on (see below) . If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply). Quality and Safety Engineer Stone, Staffordshire - Occasional Travel Competitive Salary
We are recruiting for a Manufacturing Engineering Process Engineer for a leading Aerospace organisation based on site in Broughton. Job Description: This is a great opportunity to work within the manufacturing engineering function and they will work as part of a multifunctional team to ensure industrialisation into production. Key Accountabilities: Translate design intent into the compilation and control of technical instructions and Manufacturing Engineering data for use in aircraft detail manufacture, assembly, test and certification, utilising current business tools. Implement best practice methods, tools and processes from first principles to meet current and future business requirements. Deliver detailed work preparation definition (routings, BOM's, SOI's, STV calculations) for aircraft production. Ensure that all work and documentation meets departmental procedural and regulatory requirements. Project manage detail manufacture, assembly, test and certification methods, tools and process improvements, including implementation strategies in accordance with business requirements. Evaluate capacity of the manufacturing process, enhance as required and recommend changes to the product design standard. Provide electrical/mechanical shopfloor support to operations, supply chain and Final Assembly Lines. Required Skills: Ideally 5 years' experience in a manufacturing engineering environment Knowledge of lean principles. Application and knowledge of the current business management tools, as below: SAP experience desirable DPDS/PASS and PDM link systems desirable MTM TiCon systems desirable Microsoft/Google office tools Training for the above will also be provided for a suitable candidate Ability to operate from first principles in manufacturing disciplines and activities requiring technical skills and knowledge to make daily business decisions Experienced knowledge of aircraft production, and engineering methods and procedures is highly desirable. Effective communication skills, both written and verbal. Leadership skills, and self-motivated are desirable. This is an umbrella contract, the role is Inside IR35.
10/01/2025
Project-based
We are recruiting for a Manufacturing Engineering Process Engineer for a leading Aerospace organisation based on site in Broughton. Job Description: This is a great opportunity to work within the manufacturing engineering function and they will work as part of a multifunctional team to ensure industrialisation into production. Key Accountabilities: Translate design intent into the compilation and control of technical instructions and Manufacturing Engineering data for use in aircraft detail manufacture, assembly, test and certification, utilising current business tools. Implement best practice methods, tools and processes from first principles to meet current and future business requirements. Deliver detailed work preparation definition (routings, BOM's, SOI's, STV calculations) for aircraft production. Ensure that all work and documentation meets departmental procedural and regulatory requirements. Project manage detail manufacture, assembly, test and certification methods, tools and process improvements, including implementation strategies in accordance with business requirements. Evaluate capacity of the manufacturing process, enhance as required and recommend changes to the product design standard. Provide electrical/mechanical shopfloor support to operations, supply chain and Final Assembly Lines. Required Skills: Ideally 5 years' experience in a manufacturing engineering environment Knowledge of lean principles. Application and knowledge of the current business management tools, as below: SAP experience desirable DPDS/PASS and PDM link systems desirable MTM TiCon systems desirable Microsoft/Google office tools Training for the above will also be provided for a suitable candidate Ability to operate from first principles in manufacturing disciplines and activities requiring technical skills and knowledge to make daily business decisions Experienced knowledge of aircraft production, and engineering methods and procedures is highly desirable. Effective communication skills, both written and verbal. Leadership skills, and self-motivated are desirable. This is an umbrella contract, the role is Inside IR35.
Job Title: Manufacturing Engineering Process Engineer Location: Broughton, UK Hourly Rate: £36/Hour About the Role: We have an exciting opportunity for a Manufacturing Engineering Process Engineer to join our dynamic team. As part of the manufacturing engineering function, you will work in collaboration with a multifunctional team to ensure successful industrialisation into production. This is a fantastic opportunity to be involved in key areas of aircraft production, assembly, testing, and certification, while driving continuous improvements and optimising processes. Key Responsibilities: Translate design intent into technical instructions and Manufacturing Engineering data for aircraft detail manufacture, assembly, test, and certification. Implement best practices, tools, and processes from first principles to meet business requirements. Develop detailed work preparation definitions, including routings, BOMs, SOIs, and STV calculations for aircraft production. Evaluate and enhance the capacity of manufacturing processes and recommend necessary changes to product design standards. Provide electrical and mechanical support to operations, supply chain, and Final Assembly Lines. Required Skills and Qualifications: Strong knowledge of lean principles. Proficiency in business management tools, including: SAP (desirable) DPDS/PASS and PDM link systems (desirable) MTM TiCon systems (desirable) Microsoft/Google Office tools If you are passionate about manufacturing engineering and want to work in a fast-paced, innovative environment, we'd love to hear from you! Apply now by submitting your resume and cover letter.
09/01/2025
Project-based
Job Title: Manufacturing Engineering Process Engineer Location: Broughton, UK Hourly Rate: £36/Hour About the Role: We have an exciting opportunity for a Manufacturing Engineering Process Engineer to join our dynamic team. As part of the manufacturing engineering function, you will work in collaboration with a multifunctional team to ensure successful industrialisation into production. This is a fantastic opportunity to be involved in key areas of aircraft production, assembly, testing, and certification, while driving continuous improvements and optimising processes. Key Responsibilities: Translate design intent into technical instructions and Manufacturing Engineering data for aircraft detail manufacture, assembly, test, and certification. Implement best practices, tools, and processes from first principles to meet business requirements. Develop detailed work preparation definitions, including routings, BOMs, SOIs, and STV calculations for aircraft production. Evaluate and enhance the capacity of manufacturing processes and recommend necessary changes to product design standards. Provide electrical and mechanical support to operations, supply chain, and Final Assembly Lines. Required Skills and Qualifications: Strong knowledge of lean principles. Proficiency in business management tools, including: SAP (desirable) DPDS/PASS and PDM link systems (desirable) MTM TiCon systems (desirable) Microsoft/Google Office tools If you are passionate about manufacturing engineering and want to work in a fast-paced, innovative environment, we'd love to hear from you! Apply now by submitting your resume and cover letter.
MERITUS are recruiting for a Manufacturing Engineer to join our client's client on in a permanent position to support upcoming aviation projects within a major facility. MANUFACTURING ENGINEER - COMPOSITE/METALLIC - £45,000 - GREATER BLACKBURN - GROWING OPERATION We are seeking a skilled and experienced Composites Manufacturing Engineer to join our client's team, where you will be integral to enhancing and refining the manufacturing processes for composite materials used in the aerospace industry. This role is crucial for ensuring that composite components are produced with maximum efficiency, minimal costs, and superior quality standards. The ideal candidate will possess a solid technical background in composite materials and process engineering, along with a deep understanding of aerospace production needs. Key Responsibilities: Develop and refine manufacturing processes for composite materials and components, ensuring alignment with engineering specifications and aerospace industry standards. Collaborate with cross-functional teams, including design, engineering, and production, to improve manufacturing methods such as layup, curing, machining, and bonding. Design and implement tooling, fixtures, and equipment to meet production goals and maintain quality standards. Conduct process trials and validate new manufacturing techniques to ensure they meet cost, quality, and performance objectives. Troubleshoot and resolve challenges in manufacturing processes, materials, and equipment related to composite production. Lead continuous improvement initiatives to optimize manufacturing efficiency, reduce waste, and elevate product quality. Work closely with quality assurance teams to ensure compliance with industry certifications such as AS9100 and other aerospace quality standards. Maintain comprehensive documentation of manufacturing processes, including work instructions, process specs, and quality control procedures. Keep up to date with emerging advancements in composite materials and manufacturing technologies, integrating innovative solutions into production processes. Provide ongoing technical support and training to production teams on best practices for composite manufacturing. Requirements: Bachelor's degree in Mechanical Engineering, Materials Science, or a related discipline. At least 3 years of experience in composite materials manufacturing, preferably within the aerospace sector. Deep knowledge of composite materials, including carbon fiber, fiberglass, and advanced polymers. Proficiency in CAD software for designing tooling and fixtures. Familiarity with composite manufacturing techniques such as hand layup, automated fiber placement (AFP), resin transfer molding (RTM), and autoclave curing. Understanding of aerospace quality standards, such as AS9100, NADCAP, and FAA regulations. Strong analytical and problem-solving abilities to address complex manufacturing issues. Excellent communication skills, with the ability to work collaboratively with multidisciplinary teams. Ability to manage multiple projects and meet deadlines in a dynamic environment.
07/01/2025
Full time
MERITUS are recruiting for a Manufacturing Engineer to join our client's client on in a permanent position to support upcoming aviation projects within a major facility. MANUFACTURING ENGINEER - COMPOSITE/METALLIC - £45,000 - GREATER BLACKBURN - GROWING OPERATION We are seeking a skilled and experienced Composites Manufacturing Engineer to join our client's team, where you will be integral to enhancing and refining the manufacturing processes for composite materials used in the aerospace industry. This role is crucial for ensuring that composite components are produced with maximum efficiency, minimal costs, and superior quality standards. The ideal candidate will possess a solid technical background in composite materials and process engineering, along with a deep understanding of aerospace production needs. Key Responsibilities: Develop and refine manufacturing processes for composite materials and components, ensuring alignment with engineering specifications and aerospace industry standards. Collaborate with cross-functional teams, including design, engineering, and production, to improve manufacturing methods such as layup, curing, machining, and bonding. Design and implement tooling, fixtures, and equipment to meet production goals and maintain quality standards. Conduct process trials and validate new manufacturing techniques to ensure they meet cost, quality, and performance objectives. Troubleshoot and resolve challenges in manufacturing processes, materials, and equipment related to composite production. Lead continuous improvement initiatives to optimize manufacturing efficiency, reduce waste, and elevate product quality. Work closely with quality assurance teams to ensure compliance with industry certifications such as AS9100 and other aerospace quality standards. Maintain comprehensive documentation of manufacturing processes, including work instructions, process specs, and quality control procedures. Keep up to date with emerging advancements in composite materials and manufacturing technologies, integrating innovative solutions into production processes. Provide ongoing technical support and training to production teams on best practices for composite manufacturing. Requirements: Bachelor's degree in Mechanical Engineering, Materials Science, or a related discipline. At least 3 years of experience in composite materials manufacturing, preferably within the aerospace sector. Deep knowledge of composite materials, including carbon fiber, fiberglass, and advanced polymers. Proficiency in CAD software for designing tooling and fixtures. Familiarity with composite manufacturing techniques such as hand layup, automated fiber placement (AFP), resin transfer molding (RTM), and autoclave curing. Understanding of aerospace quality standards, such as AS9100, NADCAP, and FAA regulations. Strong analytical and problem-solving abilities to address complex manufacturing issues. Excellent communication skills, with the ability to work collaboratively with multidisciplinary teams. Ability to manage multiple projects and meet deadlines in a dynamic environment.
Job Summary Provide technical support in the Engineering Service Department for the Subsequent License Renewal Project for both Hope Creek and Salem Generating Stations. The job includes preparation or review of all necessary analyses, documentation, assessments, quality reviews and supporting activities related to the subsequent license renewal project. Job Responsibilities Performs reviews of technical documents. Supports Subsequent license Renewal project for both sites. Provides support to the application process. Review or update Aging management program documents. Participate in benchmarking activities through industry assessments. Interface with vendor/contractor subject matter expert s personnel, supporting the project. Communicate and coordinate with Corporate and both Stations AMP owners. Support procedure revisions implementing the subsequent license renewal application. Perform other assigned duties as determined by the Engineering Manager. Meet Nuclear s requirements for Unescorted Site Access BASIC REQUIREMENTS: Must possess a BS Degree in an Engineering field Must have a minimum of 5+ years of Nuclear Power Plant experience including knowledge of power plant Engineering and/or Operations Must have at least 2+ Years of Licensing and/or Regulatory experience PREFERRED QUALIFICATIONS: Bachelor degree in Mechanical Engineering is preferred Demonstrated project management skills including Microsoft product usage (Excel, Work, PowerPoint) Working knowledge of NRC regulations and guidance that apply to licensing and license renewal of nuclear power plants Previous or current SRO certification PE License Experience with license renewal services including studying business cases for proceeding with License Renewal (LR) or Subsequent License Renewal (SLR), Generic Aging Lessons Learned Subsequent License Renewal (GALL-SLR) gap analysis, preparing LR or SLR applications, Time Limited Aging Analysis - (TMAA), Aging Management Plan - (AMP) upgrades and Period of Extended Operation - (PEO) implementation
06/01/2025
Full time
Job Summary Provide technical support in the Engineering Service Department for the Subsequent License Renewal Project for both Hope Creek and Salem Generating Stations. The job includes preparation or review of all necessary analyses, documentation, assessments, quality reviews and supporting activities related to the subsequent license renewal project. Job Responsibilities Performs reviews of technical documents. Supports Subsequent license Renewal project for both sites. Provides support to the application process. Review or update Aging management program documents. Participate in benchmarking activities through industry assessments. Interface with vendor/contractor subject matter expert s personnel, supporting the project. Communicate and coordinate with Corporate and both Stations AMP owners. Support procedure revisions implementing the subsequent license renewal application. Perform other assigned duties as determined by the Engineering Manager. Meet Nuclear s requirements for Unescorted Site Access BASIC REQUIREMENTS: Must possess a BS Degree in an Engineering field Must have a minimum of 5+ years of Nuclear Power Plant experience including knowledge of power plant Engineering and/or Operations Must have at least 2+ Years of Licensing and/or Regulatory experience PREFERRED QUALIFICATIONS: Bachelor degree in Mechanical Engineering is preferred Demonstrated project management skills including Microsoft product usage (Excel, Work, PowerPoint) Working knowledge of NRC regulations and guidance that apply to licensing and license renewal of nuclear power plants Previous or current SRO certification PE License Experience with license renewal services including studying business cases for proceeding with License Renewal (LR) or Subsequent License Renewal (SLR), Generic Aging Lessons Learned Subsequent License Renewal (GALL-SLR) gap analysis, preparing LR or SLR applications, Time Limited Aging Analysis - (TMAA), Aging Management Plan - (AMP) upgrades and Period of Extended Operation - (PEO) implementation
