Job Title: Principal Electrical CAD Designer Location: London Rate: Market rates Duration: 6 months with possible extension A key member of the Hardware Engineering team, this role will be to create and review electrical designs and drawings to deliver on a Defence maritime platform management project. Due to continued growth to support a high profile project, this role is increasing our existing Electrical CAD Design team capability and experience. Key Responsibilities Produce electrical schematics using AutoCAD electrical Support the creation and management of Bills of Materials (BOM) Provide electrical engineering support to the Electrical Design Engineering team Develop component libraries to support schematics Review electrical schematics in accordance with relevant standards and internal Computer Aided Design (CAD) processes. Maintain documents and drawings through development and production changes Support schedule and work package estimates, where required Collaboratively support other engineering functions from a mechanical drawing perspective To be aware of and comply with company standards of conduct and all relevant statutory requirements. Raise and action Change Notes (CN) Manage and adhere to configuration management processes for baseline control throughout the full project life cycle Review output of junior members of the team General Operational duties Attend department meetings as required Remain compliant with all applicable processes and procedures Support the Electrical Line Manager in developing and growing a professional and engaged team Competency/Skill requirements Good attention to detail Organised, adept at workload management and prioritising appropriately to meet deadlines Flexible and responsive to changing priorities Proactive team worker, equally self-motivated and able to work autonomously Proficient user of AutoCAD Electrical or similar Person Specification Essential qualifications/experience Strong experience in an Electrical CAD position Understanding and working knowledge of electrical related Defence Standards, including Lloyds Register and other Military Standards (eg Def Stan 59-411) Ability to work independently on own initiative, as well as within a collaborative team environment Ability to work under pressure in a complex and rapidly changing environment Hold SC clearance or ability to achieve it Preferred qualifications/experience Experience of working within a regulated industry (eg automotive, aviation, defence, rail etc.) Experience in the use of Windchill PLM Understanding and working knowledge of Defence programs Other requirements Clearance requirements: Post-holder must/able to hold and maintain UK Government clearances where required If this is the role for you please submit your CV at your earliest convenience
16/09/2024
Project-based
Job Title: Principal Electrical CAD Designer Location: London Rate: Market rates Duration: 6 months with possible extension A key member of the Hardware Engineering team, this role will be to create and review electrical designs and drawings to deliver on a Defence maritime platform management project. Due to continued growth to support a high profile project, this role is increasing our existing Electrical CAD Design team capability and experience. Key Responsibilities Produce electrical schematics using AutoCAD electrical Support the creation and management of Bills of Materials (BOM) Provide electrical engineering support to the Electrical Design Engineering team Develop component libraries to support schematics Review electrical schematics in accordance with relevant standards and internal Computer Aided Design (CAD) processes. Maintain documents and drawings through development and production changes Support schedule and work package estimates, where required Collaboratively support other engineering functions from a mechanical drawing perspective To be aware of and comply with company standards of conduct and all relevant statutory requirements. Raise and action Change Notes (CN) Manage and adhere to configuration management processes for baseline control throughout the full project life cycle Review output of junior members of the team General Operational duties Attend department meetings as required Remain compliant with all applicable processes and procedures Support the Electrical Line Manager in developing and growing a professional and engaged team Competency/Skill requirements Good attention to detail Organised, adept at workload management and prioritising appropriately to meet deadlines Flexible and responsive to changing priorities Proactive team worker, equally self-motivated and able to work autonomously Proficient user of AutoCAD Electrical or similar Person Specification Essential qualifications/experience Strong experience in an Electrical CAD position Understanding and working knowledge of electrical related Defence Standards, including Lloyds Register and other Military Standards (eg Def Stan 59-411) Ability to work independently on own initiative, as well as within a collaborative team environment Ability to work under pressure in a complex and rapidly changing environment Hold SC clearance or ability to achieve it Preferred qualifications/experience Experience of working within a regulated industry (eg automotive, aviation, defence, rail etc.) Experience in the use of Windchill PLM Understanding and working knowledge of Defence programs Other requirements Clearance requirements: Post-holder must/able to hold and maintain UK Government clearances where required If this is the role for you please submit your CV at your earliest convenience
Senior Firmware Engineer- Dundee- Up to £75K plus bonus (relocation package available) Are you an established Firmware engineer looking to work with the most cutting-edge technology and an Industry leader? Look no further! Akkodis are proud to be working with a Global leading firm based in Dundee on their search for a Senior Firmware Engineer to join their thriving outfit. This is a great chance to join an established firm who have a great reputation within their field and are incredibly well thought of. They are looking for someone who has the drive and energy to work within a small team. It's a busy and exiting time to join them as they work with cutting edge technologies including AI. You will be designing, developing, and documenting firmware and software drivers. These are low-level programs that control the Embedded Real Time systems across their industry. This work involves interacting with hardware components, meaning you'll need a strong understanding of both software and the electronics that run these machines. We are essentially looking for someone with an established background within Embedded firmware and design experience. You will have a keen interest in electronic or mechanical systems and enjoy using these within a Firmware or Software environment. Ideally, you will have experience with C++ in a Real Time firmware environment but any experience across Python, C, VB or Java would not be a deal breaker. You will also work with Microprocessor and Microcontroller so experience of both would be essential as well as enjoying working across VxWorks or FreeRTOS or uC/COS-II(-III) RTOS as Real Time operating systems. This is a fantastic opportunity to be part of a close knit team where you will be able to learn and grow your Engineering career. In return you will receive up to £75,000 plus bonus, extensive benefits and to work in their fantastic office based in Dundee. Send your CV today for immediate consideration to (see below) Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
16/09/2024
Full time
Senior Firmware Engineer- Dundee- Up to £75K plus bonus (relocation package available) Are you an established Firmware engineer looking to work with the most cutting-edge technology and an Industry leader? Look no further! Akkodis are proud to be working with a Global leading firm based in Dundee on their search for a Senior Firmware Engineer to join their thriving outfit. This is a great chance to join an established firm who have a great reputation within their field and are incredibly well thought of. They are looking for someone who has the drive and energy to work within a small team. It's a busy and exiting time to join them as they work with cutting edge technologies including AI. You will be designing, developing, and documenting firmware and software drivers. These are low-level programs that control the Embedded Real Time systems across their industry. This work involves interacting with hardware components, meaning you'll need a strong understanding of both software and the electronics that run these machines. We are essentially looking for someone with an established background within Embedded firmware and design experience. You will have a keen interest in electronic or mechanical systems and enjoy using these within a Firmware or Software environment. Ideally, you will have experience with C++ in a Real Time firmware environment but any experience across Python, C, VB or Java would not be a deal breaker. You will also work with Microprocessor and Microcontroller so experience of both would be essential as well as enjoying working across VxWorks or FreeRTOS or uC/COS-II(-III) RTOS as Real Time operating systems. This is a fantastic opportunity to be part of a close knit team where you will be able to learn and grow your Engineering career. In return you will receive up to £75,000 plus bonus, extensive benefits and to work in their fantastic office based in Dundee. Send your CV today for immediate consideration to (see below) Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
Senior Stress Engineer Stress; FEA; Structures; Materials Science; Mechanical Engineering £40,000 - £55,000 + excellent Benefits. Kidderminster (Hybrid available) A cutting-edge Aerospace & Defence organisation have a unique opportunity for a Stress Engineer to join their Design team. The design department designs new and modified rocket motors and related systems. Analysis of rocket motor designs, including: Ballistic performance prediction and modelling, propellant charge and hardware stress analysis, and the provision of documentation service. ESSENTIAL DUTIES & REPONSIBILITIES - Stress Engineer Technical Responsibilities Analysis of new and existing rocket motor systems such as motor hardware and propellant charge structural and thermal analysis using FEA software. The use of various software and programming techniques, including: Abaqus, Altair-Hyperworks, Fortran and Matlab. Rheological analysis of material testing results and providing advice to the technical community for validation and verification of FEA models. Development of motor structural test plans and involvement in the delivery and assessment of the structural testing results. Responsible as the structural performance technical authority aspects of assigned projects, including supporting project customer meetings, project investigations, design reviews, and corresponding customer stress engineers. Deliver key project documentation including, structural analysis and structural test plans and reports and structural design records. EXPERIENCE & BACKGROUND - Stress Engineer Educated to degree level in an engineering discipline such as Mechanical, Aerospace or Structural or another related discipline such as Material Science. Material science knowledge Use of ABAQUS software in an professional or academic environment Experience with CAD modelling
16/09/2024
Full time
Senior Stress Engineer Stress; FEA; Structures; Materials Science; Mechanical Engineering £40,000 - £55,000 + excellent Benefits. Kidderminster (Hybrid available) A cutting-edge Aerospace & Defence organisation have a unique opportunity for a Stress Engineer to join their Design team. The design department designs new and modified rocket motors and related systems. Analysis of rocket motor designs, including: Ballistic performance prediction and modelling, propellant charge and hardware stress analysis, and the provision of documentation service. ESSENTIAL DUTIES & REPONSIBILITIES - Stress Engineer Technical Responsibilities Analysis of new and existing rocket motor systems such as motor hardware and propellant charge structural and thermal analysis using FEA software. The use of various software and programming techniques, including: Abaqus, Altair-Hyperworks, Fortran and Matlab. Rheological analysis of material testing results and providing advice to the technical community for validation and verification of FEA models. Development of motor structural test plans and involvement in the delivery and assessment of the structural testing results. Responsible as the structural performance technical authority aspects of assigned projects, including supporting project customer meetings, project investigations, design reviews, and corresponding customer stress engineers. Deliver key project documentation including, structural analysis and structural test plans and reports and structural design records. EXPERIENCE & BACKGROUND - Stress Engineer Educated to degree level in an engineering discipline such as Mechanical, Aerospace or Structural or another related discipline such as Material Science. Material science knowledge Use of ABAQUS software in an professional or academic environment Experience with CAD modelling
Optical Systems Engineer Lynx Recruitment is working with a leading optics and photonics company, is seeking an Optical Systems Engineer to join their Optics and Fibre Optic R&D team in Torquay. Key Responsibilities: Provide technical leadership in the design and development of high-power fibre-optic amplifier subsystems and components Ensure projects and programmes meet deadlines, milestones and are within budget Work within a multidisciplinary team that includes optical, mechanical and electronic design engineers Manage prototype build, assembly, and testing of photonic components and systems Develop and execute test plans for functional and environmental verification Engage with customers, negotiate specifications, and present technical results Requirements: 3+ years of relevant experience in the optics/photonics industry with knowledge of optical amplifiers Commercial experience in the product development of fibre optics or Laser products Hands-on experience building and testing fibre-optic components or opto-electronic modules Ability to generate proposals and manage the financial and technical aspects of development projects Strong verbal and written communication skills, able to engage customers technically and collaboratively Degree or PhD in Engineering or Physics with Optics, Photonics or Fibre optics focus Benefits: Hybrid work model - 2 days WFH each week 25 days holiday plus bank holidays Company pension (6% contribution) Company bonus scheme Health Cash Plan SAYE Scheme
16/09/2024
Full time
Optical Systems Engineer Lynx Recruitment is working with a leading optics and photonics company, is seeking an Optical Systems Engineer to join their Optics and Fibre Optic R&D team in Torquay. Key Responsibilities: Provide technical leadership in the design and development of high-power fibre-optic amplifier subsystems and components Ensure projects and programmes meet deadlines, milestones and are within budget Work within a multidisciplinary team that includes optical, mechanical and electronic design engineers Manage prototype build, assembly, and testing of photonic components and systems Develop and execute test plans for functional and environmental verification Engage with customers, negotiate specifications, and present technical results Requirements: 3+ years of relevant experience in the optics/photonics industry with knowledge of optical amplifiers Commercial experience in the product development of fibre optics or Laser products Hands-on experience building and testing fibre-optic components or opto-electronic modules Ability to generate proposals and manage the financial and technical aspects of development projects Strong verbal and written communication skills, able to engage customers technically and collaboratively Degree or PhD in Engineering or Physics with Optics, Photonics or Fibre optics focus Benefits: Hybrid work model - 2 days WFH each week 25 days holiday plus bank holidays Company pension (6% contribution) Company bonus scheme Health Cash Plan SAYE Scheme
Senior Photonics Design Engineer Lynx Recruitment is working with a dynamic optics and photonics company, to recruit a Senior Photonics Design Engineer to join their team in Torquay. Key Responsibilities: Design and develop world-leading optical and photonic components, modules, and sub-systems Lead a team, responsible for objective setting and annual appraisals Contribute to the product development strategy and business growth objectives Work within a multidisciplinary team including mechanical and electronic engineers Prototype build, assembly, and testing of photonic components and systems Develop and execute test plans for functional and environmental verification Support design modifications and engineering changes to existing products Present technical results clearly to internal and external customers Deliver projects to plan and within budget constraints Requirements: Degree in Engineering or Physics, PhD in a relevant area preferred Knowledge and experience in fibre-optics, photonics, and general optics Excellent problem-solving skills and the ability to analyse complex technical challenges Experienced with design tools such as Zemax Optics Studio or equivalents Adaptable to rapidly changing design requirements driven by customer needs Driven, self-motivated, and autonomous with a 'can-do' attitude Strong written and oral communication skills Benefits: Hybrid work model - 2 days WFH each week 25 days holiday plus bank holidays Company pension (6% contribution) Company bonus scheme Health Cash Plan SAYE Scheme
16/09/2024
Full time
Senior Photonics Design Engineer Lynx Recruitment is working with a dynamic optics and photonics company, to recruit a Senior Photonics Design Engineer to join their team in Torquay. Key Responsibilities: Design and develop world-leading optical and photonic components, modules, and sub-systems Lead a team, responsible for objective setting and annual appraisals Contribute to the product development strategy and business growth objectives Work within a multidisciplinary team including mechanical and electronic engineers Prototype build, assembly, and testing of photonic components and systems Develop and execute test plans for functional and environmental verification Support design modifications and engineering changes to existing products Present technical results clearly to internal and external customers Deliver projects to plan and within budget constraints Requirements: Degree in Engineering or Physics, PhD in a relevant area preferred Knowledge and experience in fibre-optics, photonics, and general optics Excellent problem-solving skills and the ability to analyse complex technical challenges Experienced with design tools such as Zemax Optics Studio or equivalents Adaptable to rapidly changing design requirements driven by customer needs Driven, self-motivated, and autonomous with a 'can-do' attitude Strong written and oral communication skills Benefits: Hybrid work model - 2 days WFH each week 25 days holiday plus bank holidays Company pension (6% contribution) Company bonus scheme Health Cash Plan SAYE Scheme
Mechanical Design & Manufacturing Engineer (Microfabrication/Microfluidics) Leuven, Belgium Initial 4 month freelance contract + option to extend Please note that working from home is not possible for this position, as the nature of the tasks involved requires being physically present in the office. We believe in fostering a vibrant and interactive work environment that promotes effective collaboration, creativity, and productivity. We are looking for a mechanical design engineer with excellent technical skills in the field of micro-fabrication such as 3D printing, CNC machining, Laser cutting etc. Experience in microfluidic building blocks and set-ups is a nice to have. You will work on a variety of different projects in which customized, fluidic integration of (Si) sensor chips are demanded. You have a methodical approach and excellent reporting skills to define test plans, summarize learnings and create manufacturing protocols. The assignment Design and implement mechanical and microfluidic components for the fluidic integration of sensor chips. Define, test and validate manufacturing routes for customized components with our in-house lab facilities as well as look for external processing sources. Perform experiments in the lab to test and characterize the physical behaviour of such integration solutions. Manage time effectively according to aggressive project schedules. Work closely with an interdisciplinary team of electronic design engineers, life science researchers and external suppliers. Required knowledge and skills Bachelor/master degree in mechanical engineering, materials science, applied physics or other equivalent discipline with relevant experience in micro-fabrication prototyping for research or industry, preferably for life-science applications. Skilled with CAD design software. Familiar with a multitude of micro-fabrication manufacturing methods, microfluidic products and existing device solutions. Hands-on experience with laboratory equipment and device testing and enjoy working in the lab. Strong analytical skills and can perform data processing using analytical or computational tools. Experience working in a research or development environment with an interdisciplinary team. Excellent communication and reporting skills. Team player. Fluent in English.
13/09/2024
Project-based
Mechanical Design & Manufacturing Engineer (Microfabrication/Microfluidics) Leuven, Belgium Initial 4 month freelance contract + option to extend Please note that working from home is not possible for this position, as the nature of the tasks involved requires being physically present in the office. We believe in fostering a vibrant and interactive work environment that promotes effective collaboration, creativity, and productivity. We are looking for a mechanical design engineer with excellent technical skills in the field of micro-fabrication such as 3D printing, CNC machining, Laser cutting etc. Experience in microfluidic building blocks and set-ups is a nice to have. You will work on a variety of different projects in which customized, fluidic integration of (Si) sensor chips are demanded. You have a methodical approach and excellent reporting skills to define test plans, summarize learnings and create manufacturing protocols. The assignment Design and implement mechanical and microfluidic components for the fluidic integration of sensor chips. Define, test and validate manufacturing routes for customized components with our in-house lab facilities as well as look for external processing sources. Perform experiments in the lab to test and characterize the physical behaviour of such integration solutions. Manage time effectively according to aggressive project schedules. Work closely with an interdisciplinary team of electronic design engineers, life science researchers and external suppliers. Required knowledge and skills Bachelor/master degree in mechanical engineering, materials science, applied physics or other equivalent discipline with relevant experience in micro-fabrication prototyping for research or industry, preferably for life-science applications. Skilled with CAD design software. Familiar with a multitude of micro-fabrication manufacturing methods, microfluidic products and existing device solutions. Hands-on experience with laboratory equipment and device testing and enjoy working in the lab. Strong analytical skills and can perform data processing using analytical or computational tools. Experience working in a research or development environment with an interdisciplinary team. Excellent communication and reporting skills. Team player. Fluent in English.
We are currently looking on behalf of one of our important clients for a Hardware Development Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with some home office allowance. Your Role: Actively drive concept generation, analysis & development of innovative electronics solutions & system architectures state of the art Medical Devices in accordance with design, development & control processes Deliver functionally safe solutions with significant elements of cross-functional design eg mechanical, software, firmware in compliance with ISO 13485 & FDA Medical Device Design Control processes. Contribute to requirements definition & create design documentation & verification test plans. Participate in peer reviewing hardware development artifacts. Support the verification team with HW related verifications including CB certifications for IEC 60601-1. Drive new component introduction & obsolescence management together with third party suppliers. Provide 3rd level product care HW improvements relating to an existing product range through continuous refinement & innovative technology solutions. Perform root cause analysis as part of 3rd level support for complaints/production issues & generate technical reports. Your Skills: At least 5 years of relevant professional experience in Hardware Development Engineering. Skilled & experienced in Developing Embedded Hardware Solutions, ideally including within the Medical Device Sector. A strong knowledge of Electronics Assembly Processes & Test Methodologies. Ideally experienced in Altium Designer & DOORS Next. Your Profile: Completed Higher Education/University Degree Electronic Engineering (or similar). Efficient, resilient, organized, communicative, customer-focused & team-oriented. Fluent in English (spoken & written), German language skills are considered highly advantageous.
13/09/2024
Full time
We are currently looking on behalf of one of our important clients for a Hardware Development Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with some home office allowance. Your Role: Actively drive concept generation, analysis & development of innovative electronics solutions & system architectures state of the art Medical Devices in accordance with design, development & control processes Deliver functionally safe solutions with significant elements of cross-functional design eg mechanical, software, firmware in compliance with ISO 13485 & FDA Medical Device Design Control processes. Contribute to requirements definition & create design documentation & verification test plans. Participate in peer reviewing hardware development artifacts. Support the verification team with HW related verifications including CB certifications for IEC 60601-1. Drive new component introduction & obsolescence management together with third party suppliers. Provide 3rd level product care HW improvements relating to an existing product range through continuous refinement & innovative technology solutions. Perform root cause analysis as part of 3rd level support for complaints/production issues & generate technical reports. Your Skills: At least 5 years of relevant professional experience in Hardware Development Engineering. Skilled & experienced in Developing Embedded Hardware Solutions, ideally including within the Medical Device Sector. A strong knowledge of Electronics Assembly Processes & Test Methodologies. Ideally experienced in Altium Designer & DOORS Next. Your Profile: Completed Higher Education/University Degree Electronic Engineering (or similar). Efficient, resilient, organized, communicative, customer-focused & team-oriented. Fluent in English (spoken & written), German language skills are considered highly advantageous.
Endeavour Recruitment has an excellent long term contract opportunity for a Mechanical Engineer to join a leading client. The primary purpose of the role is to ultimately assist and support the Design Manager in the delivery of project scope. This will include the likes of the following: To undertake the delivery of mechanical engineering activities to the required scope, quality, schedule and cost. Responsible for technical aspects of the mechanical engineering work packages from identification of the need, through to handover. Undertake technical delivery of one or more design packages as directed by the Principal Mechanical Engineer. Ensure that the design documentation covers the scope of operations required by the Project Manager and is produced to agreed standards, schedule and budget. Plan for effective project implementation. Ensuring effective Quality Management Arrangements, operate and deliver through compliance with Babcock's Business Management System and Technical Manual. Support ensuring that the processes and activities being undertaken are appropriately documented with appropriate records maintained and configuration and quality controls applied. Support ensuring that staff and contractors are familiar with the hazards and risks associated with the work undertaken by the delegated engineering team through effective management and communication of the Risk Assessment. Essential skills: Knowledge of design of mechanical and nuclear process systems Knowledge of design of industrial gas systems Knowledge of design of mechanical building services. Awareness of seismic analysis for mechanical process equipment. Awareness of substantiation of process equipment for justification of Nuclear Safety Functions. Be able to demonstrate relevant knowledge and skills required in technical design development. Sound understanding of engineering design and safety practice as relevant to discipline, post and project requirements. Sound understanding of Company and departmental procedures relating to Design, Health & Safety and Quality requirements, and ability to manage tasks in accordance with these procedures. Working knowledge of relevant engineering computer applications Please get in touch for further details.
13/09/2024
Project-based
Endeavour Recruitment has an excellent long term contract opportunity for a Mechanical Engineer to join a leading client. The primary purpose of the role is to ultimately assist and support the Design Manager in the delivery of project scope. This will include the likes of the following: To undertake the delivery of mechanical engineering activities to the required scope, quality, schedule and cost. Responsible for technical aspects of the mechanical engineering work packages from identification of the need, through to handover. Undertake technical delivery of one or more design packages as directed by the Principal Mechanical Engineer. Ensure that the design documentation covers the scope of operations required by the Project Manager and is produced to agreed standards, schedule and budget. Plan for effective project implementation. Ensuring effective Quality Management Arrangements, operate and deliver through compliance with Babcock's Business Management System and Technical Manual. Support ensuring that the processes and activities being undertaken are appropriately documented with appropriate records maintained and configuration and quality controls applied. Support ensuring that staff and contractors are familiar with the hazards and risks associated with the work undertaken by the delegated engineering team through effective management and communication of the Risk Assessment. Essential skills: Knowledge of design of mechanical and nuclear process systems Knowledge of design of industrial gas systems Knowledge of design of mechanical building services. Awareness of seismic analysis for mechanical process equipment. Awareness of substantiation of process equipment for justification of Nuclear Safety Functions. Be able to demonstrate relevant knowledge and skills required in technical design development. Sound understanding of engineering design and safety practice as relevant to discipline, post and project requirements. Sound understanding of Company and departmental procedures relating to Design, Health & Safety and Quality requirements, and ability to manage tasks in accordance with these procedures. Working knowledge of relevant engineering computer applications Please get in touch for further details.
Electrical & Instrumentation Designer - £52 per hour Inside IR35 Lancashire - Hybrid (3 days onsite a week) - 6 months rolling Yolk recruitment is recruiting for an Electrical & Instrumentation Designer to work with a world leader in manufacturing and scientific research. You will be responsible for the creation and development of electrical and instrumentation design drawings, construction and demolition requirements, identification of testing requirements and to assist with troubleshooting of modifications and new installations. This role supports the sites continuous improvement activities as well as supporting new Capital Project developments to meet business and site needs. Responsibilities: Estimation of costings for E/I design and installation Design and modification of schematic diagrams, single line diagrams, loop drawings, cable routing drawings, panel layout drawings, block cable diagrams, motor control centres Drafting of scopes of work, bill of materials, termination schedules, equipment data sheets, cable schedules, labelling schedules, proof testing documents, cable transfer documents Supporting the installation supervisor by providing design packs and technical support as required. Conducting FAT's on site and at supplier locations Reporting of work status to management in regular briefings Self-manage and progress design office requests to an agreed priority list Experience Required: HNC in Electrical Design or equivalent A good understanding of P&ID's, line diagrams, process data sheets and mechanical drawings Competent in the use of AutoCAD 2019 A working knowledge in low voltage power system design A good knowledge in instrumentation and control loop design Desirable Experience: A working knowledge of DCS/PLC systems (Emerson Delta V, Hima Sella Safety Systems and Mitsubishi PLC's) A working knowledge of motor control systems (Variable Speed Drives, Soft start, DOL) A working knowledge of safety systems and equipment including Safety Instrumented Systems IOSH or NEBOSH Are you up to the challenge? If you feel you have the skills, experience, and passion to be successful in this role, apply now. Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive, we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying, then unfortunately you have been unsuccessful. Please keep an eye on our website for more opportunities.
13/09/2024
Project-based
Electrical & Instrumentation Designer - £52 per hour Inside IR35 Lancashire - Hybrid (3 days onsite a week) - 6 months rolling Yolk recruitment is recruiting for an Electrical & Instrumentation Designer to work with a world leader in manufacturing and scientific research. You will be responsible for the creation and development of electrical and instrumentation design drawings, construction and demolition requirements, identification of testing requirements and to assist with troubleshooting of modifications and new installations. This role supports the sites continuous improvement activities as well as supporting new Capital Project developments to meet business and site needs. Responsibilities: Estimation of costings for E/I design and installation Design and modification of schematic diagrams, single line diagrams, loop drawings, cable routing drawings, panel layout drawings, block cable diagrams, motor control centres Drafting of scopes of work, bill of materials, termination schedules, equipment data sheets, cable schedules, labelling schedules, proof testing documents, cable transfer documents Supporting the installation supervisor by providing design packs and technical support as required. Conducting FAT's on site and at supplier locations Reporting of work status to management in regular briefings Self-manage and progress design office requests to an agreed priority list Experience Required: HNC in Electrical Design or equivalent A good understanding of P&ID's, line diagrams, process data sheets and mechanical drawings Competent in the use of AutoCAD 2019 A working knowledge in low voltage power system design A good knowledge in instrumentation and control loop design Desirable Experience: A working knowledge of DCS/PLC systems (Emerson Delta V, Hima Sella Safety Systems and Mitsubishi PLC's) A working knowledge of motor control systems (Variable Speed Drives, Soft start, DOL) A working knowledge of safety systems and equipment including Safety Instrumented Systems IOSH or NEBOSH Are you up to the challenge? If you feel you have the skills, experience, and passion to be successful in this role, apply now. Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive, we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying, then unfortunately you have been unsuccessful. Please keep an eye on our website for more opportunities.
Mechanical Services Engineer - REMOTE JOB LOCATION: Devonport Royal Dockyard, Plymouth SECURITY CLEARANCE LEVEL: SC DURATION: 12 + Months Minimum PAY RATE: £60/hr Umbrella Inside IR35 Mainly Remote - Go to site a couple of days every month, may be required more as project goes on. Overall Department Direction: In order to deliver the MoD's submarine and warship programmes, a significant programme of infrastructure investment is required on the Devonport site. The Major Infrastructure Projects' (MIP) Business Unit has been established to support this. One of the key scope elements within MIP is establishing a defuel capability for out of service submarines, which is delivered under the programme banner of Defuel23. This work comprises of a number of interrelated projects to develop various multi-disciplinary infrastructure systems, with an overall value in excess of £100m. The Dock Readiness project is delivering the infrastructure upgrades for the existing dry dock that will be used for the submarine defuels. The dry dock is within a nuclear licensed site. Multiple work packages form the Dock Readiness project. This role is part of that Engineering Team that is delivering the designs for each of those work packages. Main Purpose of Role: The role will be supporting the project team to deliver the Dockside Rigs and Dock Bottom Village to the required scope, quality, schedule and cost. Responsible for managing the engineering and technical aspects from identification of the need through to handover. The role holder will ensure that the design documentation covers the scope of operations required by the Project Manager and is produced to agreed standards, schedule and budget. This will also include ensuring the processes and activities being managed are appropriately documented with appropriate records maintained and configuration and quality controls applied. The role holder will be required to comply with effective Quality Management Arrangements, operating and delivering through compliance with Client's Business Management System and Technical Manual. Required Knowledge, Skills, Experience and Competences: The primary purpose of the role is to ultimately assist and support the Design Manager in the delivery of project scope. This will include the likes of the following; To undertake the delivery of mechanical engineering activities to the required scope, quality, schedule and cost. Responsible for technical aspects of the mechanical engineering work packages from identification of the need, through to handover. Undertake technical delivery of one or more design packages as directed by the Principal Mechanical Engineer. Ensure that the design documentation covers the scope of operations required by the Project Manager and is produced to agreed standards, schedule and budget. Plan for effective project implementation. Ensuring effective Quality Management Arrangements, operate and deliver through compliance with Client's Business Management System and Technical Manual. Support ensuring that the processes and activities being undertaken are appropriately documented with appropriate records maintained and configuration and quality controls applied. Support ensuring that staff and contractors are familiar with the hazards and risks associated with the work undertaken by the delegated engineering team through effective management and communication of the Risk Assessment. Required Knowledge, Skills, Experience and Competences: The candidate must; Knowledge of design of mechanical and nuclear process systems eg fresh water, demineralised water etc.; Knowledge of design of industrial gas systems eg low and high pressure air, welding gases etc.; Knowledge of design of mechanical building services; Awareness of seismic analysis for mechanical process equipment; Awareness of substantiation of process equipment for justification of Nuclear Safety Functions. Be able to demonstrate relevant knowledge and skills required in technical design development; Sound understanding of engineering design and safety practice as relevant to discipline, post and project requirements; Sound understanding of Company and departmental procedures relating to Design, Health & Safety and Quality requirements, and ability to manage tasks in accordance with these procedures; Working knowledge of relevant engineering computer applications. Qualifications: The candidate will have a degree or equivalent in a Mechanical Engineering related discipline. Preferably working towards Chartered Engineer status and member of relevant institute. A range of Client specific courses will be required, such as the following; Site Induction Fire Safety Diversity Anti-bribery Data Protection.
13/09/2024
Project-based
Mechanical Services Engineer - REMOTE JOB LOCATION: Devonport Royal Dockyard, Plymouth SECURITY CLEARANCE LEVEL: SC DURATION: 12 + Months Minimum PAY RATE: £60/hr Umbrella Inside IR35 Mainly Remote - Go to site a couple of days every month, may be required more as project goes on. Overall Department Direction: In order to deliver the MoD's submarine and warship programmes, a significant programme of infrastructure investment is required on the Devonport site. The Major Infrastructure Projects' (MIP) Business Unit has been established to support this. One of the key scope elements within MIP is establishing a defuel capability for out of service submarines, which is delivered under the programme banner of Defuel23. This work comprises of a number of interrelated projects to develop various multi-disciplinary infrastructure systems, with an overall value in excess of £100m. The Dock Readiness project is delivering the infrastructure upgrades for the existing dry dock that will be used for the submarine defuels. The dry dock is within a nuclear licensed site. Multiple work packages form the Dock Readiness project. This role is part of that Engineering Team that is delivering the designs for each of those work packages. Main Purpose of Role: The role will be supporting the project team to deliver the Dockside Rigs and Dock Bottom Village to the required scope, quality, schedule and cost. Responsible for managing the engineering and technical aspects from identification of the need through to handover. The role holder will ensure that the design documentation covers the scope of operations required by the Project Manager and is produced to agreed standards, schedule and budget. This will also include ensuring the processes and activities being managed are appropriately documented with appropriate records maintained and configuration and quality controls applied. The role holder will be required to comply with effective Quality Management Arrangements, operating and delivering through compliance with Client's Business Management System and Technical Manual. Required Knowledge, Skills, Experience and Competences: The primary purpose of the role is to ultimately assist and support the Design Manager in the delivery of project scope. This will include the likes of the following; To undertake the delivery of mechanical engineering activities to the required scope, quality, schedule and cost. Responsible for technical aspects of the mechanical engineering work packages from identification of the need, through to handover. Undertake technical delivery of one or more design packages as directed by the Principal Mechanical Engineer. Ensure that the design documentation covers the scope of operations required by the Project Manager and is produced to agreed standards, schedule and budget. Plan for effective project implementation. Ensuring effective Quality Management Arrangements, operate and deliver through compliance with Client's Business Management System and Technical Manual. Support ensuring that the processes and activities being undertaken are appropriately documented with appropriate records maintained and configuration and quality controls applied. Support ensuring that staff and contractors are familiar with the hazards and risks associated with the work undertaken by the delegated engineering team through effective management and communication of the Risk Assessment. Required Knowledge, Skills, Experience and Competences: The candidate must; Knowledge of design of mechanical and nuclear process systems eg fresh water, demineralised water etc.; Knowledge of design of industrial gas systems eg low and high pressure air, welding gases etc.; Knowledge of design of mechanical building services; Awareness of seismic analysis for mechanical process equipment; Awareness of substantiation of process equipment for justification of Nuclear Safety Functions. Be able to demonstrate relevant knowledge and skills required in technical design development; Sound understanding of engineering design and safety practice as relevant to discipline, post and project requirements; Sound understanding of Company and departmental procedures relating to Design, Health & Safety and Quality requirements, and ability to manage tasks in accordance with these procedures; Working knowledge of relevant engineering computer applications. Qualifications: The candidate will have a degree or equivalent in a Mechanical Engineering related discipline. Preferably working towards Chartered Engineer status and member of relevant institute. A range of Client specific courses will be required, such as the following; Site Induction Fire Safety Diversity Anti-bribery Data Protection.
Location: Walsall Salary: £35,000 Working Hours: Monday to Friday, 08:00 - 16:30 We're seeking a skilled Design Engineer to join a dynamic team. You'll design and manage engineering projects from concept to production, ensuring they meet customer requirements and company standards. Key Responsibilities: Design new products and improve existing ranges Manage projects from concept to production validation Create technical documentation, BOMs, and 3D/2D drawings Collaborate with internal teams for smooth project execution Qualifications: HND/Degree in engineering (Mechanical or Product Design preferred) Proficiency in Inventor 2022 Experience in a manufacturing environment Ready to take your next step? Apply today!
13/09/2024
Full time
Location: Walsall Salary: £35,000 Working Hours: Monday to Friday, 08:00 - 16:30 We're seeking a skilled Design Engineer to join a dynamic team. You'll design and manage engineering projects from concept to production, ensuring they meet customer requirements and company standards. Key Responsibilities: Design new products and improve existing ranges Manage projects from concept to production validation Create technical documentation, BOMs, and 3D/2D drawings Collaborate with internal teams for smooth project execution Qualifications: HND/Degree in engineering (Mechanical or Product Design preferred) Proficiency in Inventor 2022 Experience in a manufacturing environment Ready to take your next step? Apply today!
Excellent small business providing customized machinery and equipment solutions for industrial and educational facilities application is seeking a Technical Sales Engineer to join their team. This nearly 50 year old business has a strong reputation in their niche marketplace and is expanding into other high growth markets. Seeking someone with a technical/mechanical aptitude to understand product offerings, and can work with other technical personnel for customer applications. Overall, the organization is great to their people, and provides a top tier benefits program. Responsibilities Technical marketing and sales of custom design, engineering, and development of equipment for various markets. Will interface with customers, in-person and via phone/video, and trade shows to present product and equipment offerings. Ensure product literature and website are up-to-date. Lead follow up. Occasional travel expectations would be nationwide. Not extensive travel, but needs to be comfortable going out into the field. Qualifications Technical/Engineering Degree(Chemical, Mechanical, Material Science, etc.) preferred, but not required, or relevant experience Strong technical aptitude, overall Self-starter Strong interpersonal skills Willing and eager to learn
12/09/2024
Full time
Excellent small business providing customized machinery and equipment solutions for industrial and educational facilities application is seeking a Technical Sales Engineer to join their team. This nearly 50 year old business has a strong reputation in their niche marketplace and is expanding into other high growth markets. Seeking someone with a technical/mechanical aptitude to understand product offerings, and can work with other technical personnel for customer applications. Overall, the organization is great to their people, and provides a top tier benefits program. Responsibilities Technical marketing and sales of custom design, engineering, and development of equipment for various markets. Will interface with customers, in-person and via phone/video, and trade shows to present product and equipment offerings. Ensure product literature and website are up-to-date. Lead follow up. Occasional travel expectations would be nationwide. Not extensive travel, but needs to be comfortable going out into the field. Qualifications Technical/Engineering Degree(Chemical, Mechanical, Material Science, etc.) preferred, but not required, or relevant experience Strong technical aptitude, overall Self-starter Strong interpersonal skills Willing and eager to learn
Electronics Assembly & Test Technician Yateley, Hampshire (Onsite) Role details: We're working with market leader in environmental sensor design & manufacturing. They're a globally trusted brand who've been providing reliable and high-quality sensors to a variety of sectors for over 50 years. They are looking for an Electronics Assembly & Test Technician to assemble, test and inspect electro-mechanical instruments from their product range. Requirements: Previous experience of assembling and manufacturing products with multi-commodity bill of materials and in particular machined components Printed circuit board assemblies Wiring looms and cable assemblies. Proven track record of diagnostic fault finding down to component level Carry out test and inspection of PCBs and instrumentation to set procedures Benefits: 25 days holiday + Public holidays + Christmas shutdown Friday 1pm finish Generous pension Life assurance Annual cost of living salary increase Performance related bonus Health cash plan Eligibility: To be considered for the role, you must be a sole UK National (from birth) + have resided in the UK for the past 5 years.
12/09/2024
Full time
Electronics Assembly & Test Technician Yateley, Hampshire (Onsite) Role details: We're working with market leader in environmental sensor design & manufacturing. They're a globally trusted brand who've been providing reliable and high-quality sensors to a variety of sectors for over 50 years. They are looking for an Electronics Assembly & Test Technician to assemble, test and inspect electro-mechanical instruments from their product range. Requirements: Previous experience of assembling and manufacturing products with multi-commodity bill of materials and in particular machined components Printed circuit board assemblies Wiring looms and cable assemblies. Proven track record of diagnostic fault finding down to component level Carry out test and inspection of PCBs and instrumentation to set procedures Benefits: 25 days holiday + Public holidays + Christmas shutdown Friday 1pm finish Generous pension Life assurance Annual cost of living salary increase Performance related bonus Health cash plan Eligibility: To be considered for the role, you must be a sole UK National (from birth) + have resided in the UK for the past 5 years.
A Technical Lead Firing Units Design Engineer is require for a full time on site contract assignment based in Stevenage Mission (accountabilities): To lead the resources deployed to a project within a single skill domain (eg mechanical, electronic) Responsibility: Cost/schedule/quality/performance for the tasks for his/her skill domain, to the Engineering Project Manager Developing the technical solution, in liaison with the other skill domains Running and coordinating the resources to deliver the project tasks for his/her skill area Applying the relevant development methods & processes Coordinating and supporting technical problem solving & analysis Reporting to the Engineering Project Manager and to his/her line manager on progress & issues within the skill domain Providing schedule and cost estimates for the tasks validated by his/her line manager Participate: In project/product delivery reviews internal to EE In Peer Reviews In Design Reviews Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
12/09/2024
Project-based
A Technical Lead Firing Units Design Engineer is require for a full time on site contract assignment based in Stevenage Mission (accountabilities): To lead the resources deployed to a project within a single skill domain (eg mechanical, electronic) Responsibility: Cost/schedule/quality/performance for the tasks for his/her skill domain, to the Engineering Project Manager Developing the technical solution, in liaison with the other skill domains Running and coordinating the resources to deliver the project tasks for his/her skill area Applying the relevant development methods & processes Coordinating and supporting technical problem solving & analysis Reporting to the Engineering Project Manager and to his/her line manager on progress & issues within the skill domain Providing schedule and cost estimates for the tasks validated by his/her line manager Participate: In project/product delivery reviews internal to EE In Peer Reviews In Design Reviews Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
Job Title: Senior Design Engineer Location: Worcestershire Salary: £40,000 - £55,000 Role Overview: The Senior Design Engineer will lead the design and development of new product lines, focusing on specialized attachments. This role involves managing the full product development cycle from concept to production, collaborating across teams, and ensuring products meet performance, durability, and safety standards. Key Responsibilities: Lead the design and development of new specialized attachment products. Collaborate with Product Development, Sales, and Marketing to meet market needs. Create detailed designs and 3D models using CAD software (CREO, SolidWorks, AutoCAD). Work with manufacturing teams to ensure design feasibility and cost-effectiveness. Mentor junior engineers and ensure designs comply with industry standards. Manage multiple projects and lead design reviews, risk assessments, and FMEA. Support product launches and stay up-to-date with industry trends. Required Qualifications: Bachelor's degree in Mechanical Engineering (Master's preferred). 7-10 years of mechanical design and product development experience. Proficient in 3D CAD software (SolidWorks, AutoCAD). Knowledge of manufacturing processes (machining, welding, fabrication). Strong project management, problem-solving, and leadership skills. Preferred Qualifications: Experience in construction, agriculture, or material handling. Familiarity with FEA and simulation tools. Six Sigma or Lean Manufacturing certification. What We Offer: Competitive salary and benefits package. Career growth opportunities in a dynamic, innovative environment Note: All applicants must be eligible to work in the UK. This is an excellent opportunity for a motivated individual to play a key role in an exciting and innovative company.
12/09/2024
Full time
Job Title: Senior Design Engineer Location: Worcestershire Salary: £40,000 - £55,000 Role Overview: The Senior Design Engineer will lead the design and development of new product lines, focusing on specialized attachments. This role involves managing the full product development cycle from concept to production, collaborating across teams, and ensuring products meet performance, durability, and safety standards. Key Responsibilities: Lead the design and development of new specialized attachment products. Collaborate with Product Development, Sales, and Marketing to meet market needs. Create detailed designs and 3D models using CAD software (CREO, SolidWorks, AutoCAD). Work with manufacturing teams to ensure design feasibility and cost-effectiveness. Mentor junior engineers and ensure designs comply with industry standards. Manage multiple projects and lead design reviews, risk assessments, and FMEA. Support product launches and stay up-to-date with industry trends. Required Qualifications: Bachelor's degree in Mechanical Engineering (Master's preferred). 7-10 years of mechanical design and product development experience. Proficient in 3D CAD software (SolidWorks, AutoCAD). Knowledge of manufacturing processes (machining, welding, fabrication). Strong project management, problem-solving, and leadership skills. Preferred Qualifications: Experience in construction, agriculture, or material handling. Familiarity with FEA and simulation tools. Six Sigma or Lean Manufacturing certification. What We Offer: Competitive salary and benefits package. Career growth opportunities in a dynamic, innovative environment Note: All applicants must be eligible to work in the UK. This is an excellent opportunity for a motivated individual to play a key role in an exciting and innovative company.
Senior Site Infrastructure Designer Permanent Reading/Hybrid working- 2 days/week MBNL deliver the mobile infrastructure that enables digital Britain. This is achieved by providing Property, Infrastructure and Operational services to EE/BT and Three. The infrastructure directorate is accountable for the design, deployment and in life management of site infrastructure to meet safety, service and deployment requirements and enable EE/BT and Three to deliver their best customer experiences at the lowest cost. Reporting into the MBNL Infrastructure Solutions Team within the IMS Directorate, the Senior Infrastructure Designer will support MBNL in the assurance of designs across all partners and EE and Three. You will be driving cost-effective design through collaboration and cooperation and feeding in any product, guidance or process developments required to achieve that goal. This is a hybrid role with 2 days per week onsite in our Reading office. What you will do: Review site Design submissions to ensure compliance with the MBNL guidance from MBNL, EE and Three to ensure cooperation and collaboration standards are maintained. Be a strong advocate for Health and Safety and Quality. Ensure that the solutions offered are clearly documented on MBNL systems. Report into MBNL site assurance team recording compliance and defects. Liaise with cross party Design, Acquisition and Deployment teams as required. Liaise with shareholders to resolve queries to ensure satisfactory designs. Ensure the site is designed in a cost-effective way. What we are looking for: Current Driving Licence Computer literate for MS Word, MS Excel, Emails, MS PowerPoint, AutoCAD Significant design experience in general telecoms infrastructure with an operator, MSP, or Designer/PC. Ability to interpret and author documentation to a good standard. Good interpersonal skills. Nice to have: Specialism in either Civil, Structural, Mechanical or Electrical HNC or degree level qualifications. MBNL - building strength through inclusion. At MBNL we embrace equality, diversity, and inclusion. People are at the heart of everything we do and collectively we strive to create an environment where everyone can flourish. By fostering an inclusive environment, we are championing each other's uniqueness. Inclusion & Diversity within MBNL will unlock innovation and continue to evolve how we work, to help us deliver world class infrastructure for our Shareholders and their customers. We will work creatively to offer flexible working arrangements, (like non-standard hours, part time, remote working). We want to support you to build your career without sacrificing your personal priorities. MBNL are proud recipients of the Armed Forces Covenant Gold Award, and Disability Confident accredited. Project People is acting as an Employment Agency in relation to this vacancy.
11/09/2024
Full time
Senior Site Infrastructure Designer Permanent Reading/Hybrid working- 2 days/week MBNL deliver the mobile infrastructure that enables digital Britain. This is achieved by providing Property, Infrastructure and Operational services to EE/BT and Three. The infrastructure directorate is accountable for the design, deployment and in life management of site infrastructure to meet safety, service and deployment requirements and enable EE/BT and Three to deliver their best customer experiences at the lowest cost. Reporting into the MBNL Infrastructure Solutions Team within the IMS Directorate, the Senior Infrastructure Designer will support MBNL in the assurance of designs across all partners and EE and Three. You will be driving cost-effective design through collaboration and cooperation and feeding in any product, guidance or process developments required to achieve that goal. This is a hybrid role with 2 days per week onsite in our Reading office. What you will do: Review site Design submissions to ensure compliance with the MBNL guidance from MBNL, EE and Three to ensure cooperation and collaboration standards are maintained. Be a strong advocate for Health and Safety and Quality. Ensure that the solutions offered are clearly documented on MBNL systems. Report into MBNL site assurance team recording compliance and defects. Liaise with cross party Design, Acquisition and Deployment teams as required. Liaise with shareholders to resolve queries to ensure satisfactory designs. Ensure the site is designed in a cost-effective way. What we are looking for: Current Driving Licence Computer literate for MS Word, MS Excel, Emails, MS PowerPoint, AutoCAD Significant design experience in general telecoms infrastructure with an operator, MSP, or Designer/PC. Ability to interpret and author documentation to a good standard. Good interpersonal skills. Nice to have: Specialism in either Civil, Structural, Mechanical or Electrical HNC or degree level qualifications. MBNL - building strength through inclusion. At MBNL we embrace equality, diversity, and inclusion. People are at the heart of everything we do and collectively we strive to create an environment where everyone can flourish. By fostering an inclusive environment, we are championing each other's uniqueness. Inclusion & Diversity within MBNL will unlock innovation and continue to evolve how we work, to help us deliver world class infrastructure for our Shareholders and their customers. We will work creatively to offer flexible working arrangements, (like non-standard hours, part time, remote working). We want to support you to build your career without sacrificing your personal priorities. MBNL are proud recipients of the Armed Forces Covenant Gold Award, and Disability Confident accredited. Project People is acting as an Employment Agency in relation to this vacancy.