64 joburi disponibile

This global manufacturing company has an opening for an Automation Control Engineer in the Columbus, OH area. This Engineer will lead challenging and exciting programs geared towards improving safety, reliability, capacity, and cost. Key Responsibilities: Provides control systems technical support to areas of responsibility. Identify and work with technical personnel to develop best practices for processes/equipment. Lead troubleshooting and RCA (Root Cause Analysis) for complex control system related issues. Assists in the development of the 5 year technology improvement roadmap. Participate in area PHAs, provide safety interlock expertise, and develop an understanding of area field instrumentation. Additional Incentives: 401k match. Health and Dental Insurance. Paid Time Off. Variable bonus plan Job Qualifications: Bachelor's Degree in Electrical, Mechanical or Chemical Engineering and also must have automation control background. DCS experience is preferred. Additional requirements: Knowledge of key PSM Technology elements such as Process Hazards Analysis, Process Technology, Management of ChangeTechnology, and RAGAGEP. Ability to apply technical knowledge to diagnose, troubleshoot, solve or help others solve equipment and/or process issues This is a direct hire position. Relocation assistance is available.

Prestigious Fortune 500 Company is currently seeking an Optical Process Engineer. Candidate will be responsible for supervising and leading a group of junior members and technicians in and process and packaging development for opto-mechanical and opto-electronic components and engines Responsibilities: Responsible for the execution of DFX (manufacturability, quality, cost, testability) in product development, process and control plan in place Responsible for process technology, packaging platform exploration, evaluation and introduction Responsible for Failure Analysis support and process development on sustaining products Qualifications: 8+ years' experience of opto-mechanical packaging and process development, engineering in fiber optics and optoelectronic Experience with MEMS, PLC, Liquid Crystal (LC's) Strong Experience and knowledge on opto-mechanical packaging design and process Strong Experience and knowledge on design for manufacturability/reliability (DFx), yield/cost analysis Strong Experience on testing engineering, process development, quality tools (FMEA, DFMA, DOE, etc) and Telcordia qualification BS in Optics, Physics, EE, Material or related engineering discipline

[b]Are you an experienced Mechanical Craftsperson / Technician looking for a new challenge?[/b] South West Water provide reliable, efficient and high quality drinking water and waste water services throughout Cornwall, Devon, and parts of Somerset and Dorset. We believe that by investing in the future of our region, we are not only improving the quality of life for today's residents and visitors but are also taking responsibility for future generations. Our aim is to continually drive up standards, particularly in the areas that matter most to our customers and be amongst the best in the water industry. An exciting opportunity has arisen to join one of the South West's leading employers as a Craftsperson - Mechanical for our team based in Tolgus, Redruth. [b]The Role[/b] The Craftsperson - Mechanical will strip, inspect and repair assets which are sent through South West Water's internal Repair Workshop from both Waste Water Services and Drinking Water Services function. You will provide services of the required quality and quantity, in a sustainable manner that meets the required internal and external customer service standards, whilst protecting the environment. Duties include: *Asset repair and maintenance as scheduled by the scheduling team or your manager.*Undertaking any training required in order to carry out work activities in a safe or legal manner.*Assisting operational staff with the resolution of complex problems.*Accurate and timely feedback of activities completed.*Keeping our customers updated with activities which may impact on their processes.*Using method statements and safe systems of work for the activities you carry out.*Having a good understanding of Health & Safety responsibilities in a work place.*Working with or in close proximity to chemicals in accordance with COSHH, QMS Procedures and relevant Health and Safety standards.*Liaising with the Maintenance & FSC Manager to ensure schedules are optimised. [b]The Ideal Craftsperson - Mechanical:[/b] *Experience of working within a maintenance environment*Worked with Risk Assessments, Method Statements and Safe Systems of Work to deliver an effective and safe maintenance regime*Able to deliver an effective maintenance service in both workshop and site environments*Experience of working with Drinking and / or Waste Water treatment processes would be desirable*Able to fault find and repair large complex pieces of mechanical equipment.*Able to work under pressure to deliver within tight deadlines [b]Rewards & Benefits:[/b] In return for your hard work as our Craftsperson - Mechanical, we can offer a salary [b]26,486 to 29,914 per annum[/b] dependent on skills and experience. We also offer a range of excellent benefits, working within in a team-orientated and collaborative environment, for a company that strives to be environmentally, socially and economically sustainable. [b]If you have the skills and experience to join our team as a Craftsperson - Mechanical, click [/b][b]apply today.[/b] No terminology in this advert is intended to be deemed discriminatory. We are happy to accept applications from all suitably qualified persons regardless of their age, gender, race, religion, disability, sexual orientation or marital status.

Contract Mechanical Design Engineer Duration - 6 months Initially Location - Gloucestershire Rate -£35 - £50 per hour My client based in Gloucestershire are looking for a mechanical design engineer on a contract basis. They are a well-established engineering company with over 30 years' industry experience. The engineering team is reasonably small therefore they are looking for someone to come in and play a key role in new product development. For this role the company are ideally looking for: Strong 3D CAD Design (Ideally Solidworks) Experience with hydraulics Experience with designing components Strong mechanical design Hydrostatic Drive Hydraulic Circuits Knowledge of Electrics Over Hydraulics of Interest Heavy Materials Handling The company are looking for somebody to be a lead design engineer and advise best practise on new product developments. Initial 6 month contract with strong potential for further extensions. Please call me or email your CV ASAP - if you don't have an up to date CV, that's not a problem, please still get in touch and I'll be happy to discuss further.

Mechanical/Quality Inspector Nailsea - Somerset 6 months Hourly Rate £18 to £20 My client is seeking an experienced Mechanical Inspector to join their busy team in Nailsea. The successful candidate will have hands on Mechanical component Inspection experience. Responsibilities: To support and improve Quality in Manufacturing through:- Ensuring all aspects of production are carried out in accordance with company procedures relating to HSE and relevant quality Codes of Practice. Ensure Work Order documentation is correct and completed to date before, during and on completion of the build process. Ensure safe working practices are adhered to at all times and general housekeeping is maintained to a high standard. To provide the verification and sign off of process generated documentation related to the manufacture of subsea controls and ancillary equipment, in order to ensure that all the planned and specified requirements have been satisfactorily undertaken. To close work orders on the satisfactory completion of the respective work order. To carry out product and process surveillance, including the liaison with manufacturing personnel to ensure that any problems identified and recorded are dealt with effectively. To raise Non- conformance records related to product build problems. To carry out specialist inspection techniques in accordance with build requirements To contribute to departmental improvement initiatives. To enhance and raise awareness of inspection and quality standards within the site. Please submit your CV in the first instance.

Capable of working on own initiative to derive requirements for hybrid electric drive and suspension solutions Capable of liaising internally and externally to identify solutions to requirements and produce a rational recommendation for the solution CAD Capable (Solid Works) to produce and communicate concepts and refine these to a Preliminary Design Able to conduct numerical analysis (by hand calcs or through use of software tools) to assess concepts for suitability and/or size components, MS Office (Excel Intermediate). Use of MathCAD and/or Matlab Simulink is beneficial. An appreciation of gear design and bearing selection. An appreciation of vehicle drive train and suspension technologies would be beneficial What outputs, outcomes and/or deliverables will the resource be accountable for delivering? Internal technical reports, drawings and calculations in support of bids and deliverables.

Wireman will be responsible for working with the team members, to support and maintenance of Test Equipment. Investigations and product enhancements utilizing the exiting extensive knowledge and resource pool. The Role: Construction and repair of Test Equipment for production using various materials, parts and techniques. Working with design to identify the need/benefit of test equipment. Translate specification requirements in to realistic and representative outcomes. Working with the team members, from manufacturing to support investigations and product enhancements. Compilation of documentation including test procedure and reports. Buying parts for Production TE Build. Assembly of surface mount and through hole PCB's, mechanical assembly and testing of monitoring systems The Person and Requirements You will be a self-motivated team player with effective communication and influencing skills. Ideally you will be educated to City and Guilds standard in a relevant discipline, Electronics or machining/Metalwork with demonstrable experience within a manufacturing/engineering environment. A basic knowledge of electronics, a basic knowledge of mechanical design. Use of test rigs and associated test electrical/electronic equipment Strong organisational skills The ability to interpret and create assembly & test instructions Problem solving tools and techniques Clear documentation skills MS Word and MS Excel Familiarity with Requirements Management Interdepartmental liaison skills Aware of export compliance processes and be able to tag items and data (Training Available) Must be able to work on both commercial and military programs (Security Clearance required) Will possess general workshop skills Keep a tidy working environment Cable form manufacturing to include splicing and crimping to the required company standards Desired Characteristics Able to communicate at all levels ie Senior Management, Engineering, Manufacturing, external suppliers, customers and Lab Team. Self-managing the all tasks in a creative flexible, collaborative and proactive way with proven competency. Adaptable technical skills for future development of the lab. Comfortable working and contributing into a rapid, experimental, development, prototype environment. Prepared to work the system to ensure rapid task delivery, covering other job rolls where appropriate. Proven ability to deliver complex tasks with minimal management support. Flexibility and ability to deliver under tight time scales.

Role: Manufacturing Technician Location: Greenford - UB6 8UA Duration: 6 month initial contract Pay rate: £17 - £22 per hour Job Purpose: To assemble units and/or undertake repairs to PCB's following drawings and documentations according to aerospace industry practices within manufacturing timescales. Key responsibilities: To assemble units following drawings and documentation Work to clients Precision Control Systems and aerospace industry standard procedures To undertake repairs of assemblies or PCB's as instructed To work within established manufacturing times To provide recommendations for improvements To undertake prototype or mechanical assembly as requested by your line manager Ensure that all documentation is completed and up-to date Ordering and checking/rejecting of components To maintain the high quality standards that our customer expects. To be flexible across operations and undertake work in accordance with your skill set. Planning and organising your tasks daily. Ensure that your skills Matrix is up to date There may be additional activities to perform from time to time in order to maximise the contribution to the clients Controls' goals and objectives (include in all to capture any other duties not stated) Skills/Experience: Essential Experience in working in manufacturing environment Ability to work on own and within a team Good communication skills Able to follow instructions Demonstrates good attention to detail producing consistently high quality work Computer literate Adaptable and flexible approach to their work Experience in managing their daily key activities to achieve timescales to quality Desirable Proven capability to recognize IPC standards Has worked in an Aerospace Organisation ONC, City and Guilds or equivalent qualification in a technical discipline Has worked to IPC standards or currently has the IPC qualification

Qualitek Services has an immediate 12 months+ contract opening for a Mechanical Aerospace Propulsion Engineer in Dulles, Virginia (VA) 20166 REQUIRED SKILLS * Must be a US Citizen.* * There is NO relocation assistance available for this position.* Candidate must have a Bachelor's Degree with at least 2 years of previous work experience. Candidate shall possess a Bachelors of Science Degree in Engineering, preferably in Aerospace Engineering or Mechanical Engineering. Top three skills: Pyrotechnic shock test and modelling using NX, Femap, and Python Hypermesh thermal/fluid analysis using Sinda/Fluint or thermal desktop, and Easy 5 Ordnance and Pneumatic Design, Integration and Test Experience Bottom three skills: Cad Designer Minimum of five years related experience with propulsion engineering subsystems is required or equivalent combination of education and experience. Candidate is preferred to have experience with liquid propulsion systems. Candidate must possess experience with design analysis, manufacturing documentation, hardware qualification/acceptance testing and the ability to evaluate engineering changes and product discrepancies and their effect on the finished product. Candidate must have ability to travel, expected at least 10% of the time. Candidate must possess the ability to obtain security clearance RESPONSIBILITIES: This opening is for a Mechanical Propulsion Engineer who has preferred experience working on, designing, evaluating and analysing liquid propulsion systems. The Propulsion Engineer will perform a wide range of duties associated with the specification, procurement, test, and delivery of related hardware for use on launch vehicle platforms. Candidate will be support for all aspects of product management, including resolving technical issues, scheduling of production and test activities, and working through potential conflicts with suppliers. In addition, candidate will maintain detailed records for each component type, which includes specifications, purchase orders, pedigrees, test results, key technical characteristics, and non-conformances. The Candidate will also support the gathering, maintaining, formatting, compiling, assessing technical data, such as laboratory or material test results and engineering design changes. The Candidate will produce engineering documentation, reports, drawings, and presentations. The Candidate will support the writing and implementation of Specification and other Requirements Documents, Statements of Work, Work Packages, and Test Reports. Create pedigrees, qualification matrices, as well as document any deficiencies to internal engineering standards. Perform post-flight data review including determining performance characteristics and document results for final post- flight reports. Candidate will be expected to coordinate with necessary subject matter expert support in the company as needed to achieve those necessary objectives. Based on specific stated objectives perform analysis, design, or test of one or more complex materials, structural components or functional systems of company products. Without detailed direction, study basic design concepts and criteria for assigned complex materials, components, or functional systems to ascertain the engineering principles involved and to adopt features from previously successful designs of a similar nature. With general direction, plan, prepare, and complete the design of assigned complex components and functional systems. Study the operation of systems, select major components to meet functional and operational design requirements. Direct the more detailed analysis and design and follow up to assure compliance with original philosophy and good engineering practices. Pay Rate: $ 40/hr MAX DOE Please e-mail your MS-Word resume and salary requirements along with the reference number 5383 to (see below) All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin disability, or protected veteran status.

LOCATION: Greater Chicagoland Area near Frankfort, IL OVERVIEW OF THE POSITION: As a growing global manufacturing organization, our client strongly believes that their success and innovation starts with their employees. Fostering a work environment that promotes collaboration and inventiveness, our client is looking for professionals who are looking to contribute to their success. Currently, they are looking for an experienced Sr. Mechanical Engineer. RESPONSIBILITIES: Design, test and installation projects through specifications. Develop documentation (BOM'S/ECN's/REA's). Responsible for large sub-system design projects. Develop and monitor projects through budget, schedule and design. Manage design projects with support of others. Recommend improvement ideas and assist in implementation. Some travel required. SKILLS: Bachelor's degree in Mechanical Engineering with 7+ years' of Machine design. Proficient in design using 3D software. Must have high speed experience. Team leader with the ability to prioritize and multitask. Work with customers directly. Experience with manufacturing and machine/mechanical mechanism design. WHEN RESPONDING TO THIS OPPORTUNITY: Resumes without the required technical skills and experience will not be considered. Although a strong desire for a certain type of position is a credit to your goal, experience is necessary. ID #: JS13128 - Sr. Mechanical Engineer

Multi Skilled Maintenance Engineer - Permanent - Hampshire - £40,000 - £50,000 Our clients currently have a vacancy for a Maintenance Engineer (ILS) at their Glasgow or Portsmouth Naval Base. As a member of the Support organisation you will be working within a team responsible for influencing the operability and maintainability of a Global Combat Ship, analysing systems, assuring the design, deriving maintenance and contributing to the support products required by the platform in service. This is an excellent opportunity to develop your Supportability Engineering capabilities within a dynamic and challenging environment, and to be involved in the development of a support solution for a complex platform. It is also a great chance to gain experience in an engineering discipline that addresses the complete system, and one that will also give you exposure to customer, business and supplier dynamics as part of the wider client project. Your main responsibilities as a Maintenance Engineer: You will be expected to work across a variety of engineering support disciplines and capabilities, so the successful candidate will be involved in the following areas: Analysing System Reliability and Maintainability data. Verification and validation of sub-contractor engineering data deliverables. Working across various disciplines to contribute to the production of quality support products including; FMECA's, maintenance schedules, technical publications, Production of technical reports to support analysis and derived maintenance. Using technical data to develop removal routes, and maintenance task instructions. Working in an ILS database (eagle) to input and manipulate data providing linked assets and integrated support products. Your skills and qualifications as a Maintenance Engineer: Degree/HNC or equivalent experience in a relevant Engineering or Science based discipline. Knowledge and experience of Electrical/Mechanical systems. The ability to identify & mitigate issues in the development of engineering solutions Ability to read and analyse schematic diagrams. Ability to analyse technical problems and provide solutions. Possess good verbal and written communication skills whilst working well within a team. Produce accurate technical reports Desirable: Experience of utilising databases and understanding CAD models Knowledge of the Support environment for military equipment Familiar with product design and build processes Ideally will have experience within a maintenance/maintainer role from a marine environment such as shipbuilding, ship support or oil and gas, although Supportability experience from other areas is equally relevant and welcome. Familiar with production of support products such as maintenance schedules, technical documentation, FMECA, LORA. We will provide relevant training for any of the above desirables required for your role. What we are looking for in you: Strong communication skills, ability to build good working relationships with management and the team, as well as the customer. A positive attitude, analytic thinking and problem solving skills are key requirements for this role. You must also possess a flexible attitude to your work alongside the ability work well as part of a team. Strong engineering principals with a sound understanding of integrated logistics support are essential for the successful candidate. RECOMMEND A FRIEND: If you have professional friends/colleagues who would be interested in one of our roles and our excellent levels of service too, we'd like to recognise your recommendations with a 'thank you' of our own. For every colleague you refer who then starts a role through Datasource either Contract or Permanent, we will send you £250 of Love to Shop Gift Vouchers! You will be required to hold a minimum of SC or willing to undergo. If you do not hold an active SC or willing to undergo please familiarise yourself with the vetting process before applying. (c) Copyright Datasource Computer Employment Limited 2019.

Contract Mechanical Design Engineer Duration - 6 months initially Location - South Wales Rate -£35-£40 per hour A well-established engineering company based in South Wales are currently on the hunt for an experienced mechanical design engineer on an initial contract basis. The company are well respected within the automotive industry and have a number of new projects which you'll be playing a key role on. The contract length is initially 6 months although it's likely to be a much longer-term contract if this is of interest. Ideal candidate will have Strong background with Catia V5 Highly proficient use of 2D and 3D CAD packages Plastics experience (Beneficial) Automotive industry background (Beneficial) The company are looking to set up interviews for late this week and early next so if you're interested please get in touch ASAP or email your CV ASAP - if you don't have an up to date CV, that's not a problem, please still get in touch and I'll be happy to discuss further.

Are you an experienced Mechanical Engineer looking to step up into a lead role? This opportunity offers the chance to lead a small team, whilst still being involved in the hands-on Mechanical Design. A fast-growing company in Oxfordshire are looking for a Lead Mechanical Engineer to provide leadership to their Mechanical Design Engineering group. The business is a rapidly growing and world-leading supplier of unique technology to multiple industries including Scientific, Consumer Goods and Defence. Their award-winning R&D and Engineering teams have created and developed innovative processes and equipment to deliver new technology for commercial applications. As a technology business, there is an immediate plan to take manufacturing equipment to the next level, improving performance and efficiency. It's essential that their machines, and accessories are developed to the highest standard to ensure they can be seamlessly transferred to the manufacturing team and customer sites. This is a technical management role and you will need the ability to lead by example and mentor less experienced members of the team. You will be responsible for assigning and managing the workload of the Mechanical Design team. You must be comfortable taking a hands-on role in the design process when needed and you will conduct design reviews and verify the accuracy of the design work of your staff. To be suitable for this position you should have: - A background in Mechanical Design - Experience working at a Senior or Lead Engineer level, or be able to demonstrate experience playing a leading role in design or development projects - Experience with Special Purpose Machinery may be beneficial, but is not essential This position can offer a salary of £50,000 - £60,000 with benefits including 25 days holiday, pension matched up to 5% and healthcare. If you are interested in this opportunity then please get in touch with an updated CV as interviews can take place over the next two weeks. Huxley Engineering, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy

Staff Optical Process Engineer $130-150K +bonus Fremont, CA We are currently building our in house Passive Components Engineering staff and are looking for a talented Staff Optical Process Engineer to join our team. If you are looking for a way to accelerate your career and be part of a great company, this may be the opportunity for you. In this role you will have the opportunity to be responsible for optical network component, module design and development with emphasis on process development and engineering and other process related work, will conduct full cycle of NPI to launch new product in manufacturing. DUTIES & RESPONSIBILITIES: Responsible for supervising and leading a group of junior members and technicians in and process and packaging development for opto-mechanical and optoelectronic components and engines Responsible for the execution of DFX (manufacturability, quality, cost, testability) in product development, process and control plan in place Responsible for process technology, packaging platform exploration, evaluation and introduction Responsible for Failure Analysis support and process development on sustaining products Job Requirements WORK EXPERIENCE: 8+ years' experience of opto-mechanical packaging and process development, engineering in fiber optics and optoelectronic Experience with MEMS, PLC, Liquid Crystal (LC's) Strong Experience and knowledge on opto-mechanical packaging design and process Strong Experience and knowledge on design for manufacturability/reliability (DFx), yield/cost analysis Strong Experience on testing engineering, process development, quality tools (FMEA, DFMA, DOE, etc) and Telcordia qualification EDUCATION: BS in Optics, Physics, EE, Material or related engineering discipline

5 years post graduate (or equivalent) experience Either have been awarded Chartered status (CEng, MIGEM, IMechE, MEI) or have equivalent technical experience to work towards this. The ability to demonstrate and communicate a comprehensive knowledge and experience in project planning, due diligence and design issues relating to fuel supplies for power generation, natural gas transmission and distribution together with storage systems for natural gas related infrastructures associated with Residential, Retail, Industrial and Commercial Developments as well as a wide knowledge of both UK and global oil and gas industry standards and legislative requirements. Registration as a G17/G35 Design Approver/Appraiser and experience with LNG would be advantageous. Technical reports, site appraisals, design calculations and the management of project drawings together with technical independence within the field of oil and gas transportation and storage systems design. Good knowledge of the relevant UK and international gas industry design codes such as IGEM/TD/1; TD/13; TD/4; TD/3; ASME: B31.8; B31.3; B31.4; etc. - well versed in the development of project documentation, preparation and interpretation of drawings, Materials and Equipment Data sheets. Knowledge of National Grid/GDN standards would be advantageous. Fully conversant in the use of the Microsoft Office suite of software applications, competence in other technical software applications would be advantageous to the position eg AutoCAD and PDS. The ability to direct and check design outputs making use of this software would be seen as a further advantage. You will have particular experience in liaising with clients, co-professionals and design teams. Also experience of liaising with highway, water, rail, statutory and local authorities in negotiating the necessary outline and detailed technical approvals, would be advantageous. Possess a good knowledge of the legislative processes associated with planning, design and technical consents process. Furthermore, adoption and contract procedures for the routing of high-pressure natural gas transmission pipelines, distribution pipelines, mains and asset infrastructure projects and how, if applied effectively these skills combine to add value to a client's project/development proposal. You will also have a robust knowledge of the financial and contractual aspects of planning, bidding, and delivering both large and small projects. To find out more about Huxley Engineering, please visit the website. Huxley Engineering, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy

The Role Description The Windscale Project Engineering Delivery Team provides multi-discipline project engineering support to active nuclear and non-active projects to be implemented in the Windscale Laboratory. The team cover all aspects of the project engineering stages; scope, planning, concept design, detail design, manufacture, safety case, testing, safe system of work production, installation, and commissioning. Our expertise includes the supply of research and development rigs for non-active use, operational rigs for use in a nuclear environment, and infrastructure improvements to the Windscale Laboratory. The role of Mechanical Project Engineer is to provide engineering expertise to enable:- The design, build, testing, development, commissioning and on-site installation of active rigs and analytical equipment to support scientific research and development work in the nuclear industry. The modifications of existing active and non-active nuclear facilities (eg for infrastructure improvements, changes in process requirements etc). The troubleshooting/fault finding of existing nuclear equipment and plant as required. Key Accountabilities Accountable to the Facility Engineering Delivery Manager; for allocated mechanical or multi discipline engineering projects, following the NNL project delivery procedure and working with an NNL project manager, produce scope of works, estimates for cost/schedule, and project plans for the project. Interface with customers, key stakeholders, and contractors, working in the Windscale Laboratory. Work alongside project/programme managers to ensure that work is delivered to meet time, cost, quality and safety requirements. Produce purchasing specifications, assess tender documents and select suitable contractors for project contracts, progressing the NNL procurement process throughout contract life cycle to ensure delivery of a quality product. Working with internal and external designers, and in accordance with the NNL Technical Manual produce concept, preliminary, and detail designs to site and statutory regulations. Ensure compliance with all legislative, regulatory and company policy standards and procedures eg safety, quality, risk, security etc. applicable to the project. Liaising with commissioning teams, safety assessors, facilities personnel, project stakeholders and other scientific/engineering disciplines as required providing fit for purpose engineered solutions. Where required produce working instructions, risk assessment, quality plans, commissioning sheets, and maintenances instructions in accordance with statutory and site requirements. Work with Persons Organising Work (POW's) to prepare work packs for installation and commissioning of equipment. Where required and with training produce CE marking, PUWER, LOLER, and/or pressure regulations assessments. Produce handover documentation. Record and archive project and technical files in accordance with NNL procedures. Provide technical expertise and guidance on issues appropriate to their discipline. Key Requirements Essential Skills/Qualifications: Degree/HND in Mechanical Engineering or closely related subject and a high level of experience in mechanical engineering. Experience working in the nuclear sector Knowledge of the legislative, regulatory, quality and environmental requirements relating to engineering development projects. Excellent verbal and written communication skills, to enable ideas and concepts to be clearly communicated to customers, regulators and key stakeholders. Proven track record of problem solving and seeking solutions. Desirable Skills/Qualifications: Proficient in the use of 2D or 3D CAD design packages. Experience of producing PMP's, Design Justification Reports/Memo's, and attending multidiscipline HAZOP reviews. Proven track record of working with contractors and the external goods and services supply chain. Strong leadership qualities. Self-motivated, high energy contributor. Questioning attitude. Excellent organisational and planning skills. Additional information about the process Mechanical Design Engineer x 2 Reference: CBS9JP Location: Seascale, Cumbria Salary: £39ph Umbrella or PAYE Job Type: Contract Job Duration: 12 months Contact details: Charlotte Williams - (see below) This role has been deemed inside of scope of IR35. NuclearWorks welcomes applications from all suitably qualified people regardless of gender, race, disability, age or sexual orientation. Services offered are those of an Employment Agency and Employment Business. If you match these requirements, please apply as usual. Elevate will send you an email, please open, click and action it and your application will be visible to the hiring organisation directly. Elevate provides a route to contract and contingent assignments across many skills areas by matching your profile to relevant jobs that our customers post to the platform.

Excellent opportunity to join a well-established business where you will collaborate with a dynamic, multi-disciplined team of research and engineering specialists, and be the brains behind world class projects on a state-of-the-art manufacturing facility. You will have the opportunity to work closely in partnership with international clients and given the platform to enjoy a long, successful career as there are exciting opportunities for internal progression into senior positions of influence. This well-established business specialise in the design and manufacture of advanced components for the Aerospace and Aviation sectors. As a business they are well-recognised and have diversified their products to attract a larger client base. They are in the process of a large recruitment drive to support their new projects and they now seek a Senior Mechanical Design Engineer to lead these developments. In this role you will be tasked with managing the full product design and development of cutting-edge components to support company products. You will make use of Solidworks and work closely with the R&D teams to support new product developments. This is a fantastic opportunity to join a progressive business that will provide you with career path and technical challenge you need to help you quickly progress your career. Roles and responsibilities: -design and develop a specialist range of aerospace components -collaborating with R&D specialists for new product innovations -product testing and rapid prototyping -liaise with international clients on product specifications and provide key technical support Skills and background required: -Senior Mechanical Design Engineer -Working Experience in Aerospace, Defence or Aviation sectors -Practical knowledge of CAD, Solidworks If interested please get in touch with me, Francis Macaulay from iO Associates.

CAD Drawing Assistant Location: Manchester Duration: ongoing temp role, 3 months rolling On-Board: ASAP Our client, who is a leading Telecommunication company, is currently seeking a CAD Drawing Assistant to join their existing team with opportunity to grow in this challenging position. With the state of the art facilities, multicultural working environment and other benefits, this is an opportunity that you don't want to miss out. RESPONSIBILITIES: Produce technical drawings for the Site Design Department using AutoCAD Establish and maintain library of AutoCAD Blocks and Templates Accurate information to be entered onto drawings Work to strict deadlines, able to manage pressures and work loads Producing drawing with required quality following given drawing standards/specifications Juggle work load, manage a number of critical tasks at the same time Good communication skills to be able to liaise with Design Technicians and Design Engineers. Keeping using IT software to keep accurate and detailed Workflow Trackers and report within the team Maintain document log and document tracker THE SUCCESSFUL CANDIDATE: Right to work Eligibility in the UK. Passport and Visas will be checked as part of the recruitment process. Mechanical/Civil/Structural Engineering Degree or equivalent Proficient in the use of Microsoft Office: Word, Outlook mail, Excel, PowerPoint and Outlook Mail. Recent hands on experience using AutoCAD Ability to work effectively in a team environment and collaborate with a wide variety of people Professional and positive approach Self-Motivated If you are interested in applying, please call Jack or send your latest CV to (see below) Project People is acting as an Employment Business in relation to this vacancy.

Rapidly growing, both organically and through acquisition, equipment manufacturer is seeking a Mechanical Engineer to own the Hydraulic System design for custom machinery. This is an excellent company with a dynamic engineering team focused on new designs and upgrading Legacy equipment. The position is open due to growth and expansion of the engineering staff. This engineer will work closely with all engineering teams for multiple product line groups and focus on developing and validating new and modified hydraulic systems on current production machines, equipment under development and custom built equipment. The employee will be one of two hydraulic specialists on the engineering staff, creating strong value for the company. Primarily, the 3D software used is Solid Edge. Education and Experience: Bachelor's Degree - Engineering At Least 1 year of Hydraulics Engineering Background 3D Design Experience Good Communication and Project Management Capability Compensation: $80-100K, depending on the candidate + Potential Bonus + Competitive Benefits