FPGA Engineers - SC Clerarable Firmware/FPGA Engineers - Luton - Bristol or Basildon 4 days on site hybrid These are ongoing contract positions, 12 months initially (Inside of IR35). Duties: Designing, developing, and delivering firmware solutions. Responsibilities will include: Concept development for complex functions and systems. FPGA design and analysis. Production of material for design reviews. Development of test planning, integration, and design verification. Ensuring that all firmware designs follow the firmware processes. Skills needed : Experience in design techniques using VHDL. Experience in verification techniques using either VHDL or System Verilog/UVM. Experience in specifying timing and area constraints for efficient FPGA place and route. Ability to analyse system-level requirements and derive detailed firmware requirements. Degree (BSc, BEng, MEng, MSc, PhD, EngD) in Electrical & Electronic Engineering or similar engineering/science course. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
22/04/2025
Project-based
FPGA Engineers - SC Clerarable Firmware/FPGA Engineers - Luton - Bristol or Basildon 4 days on site hybrid These are ongoing contract positions, 12 months initially (Inside of IR35). Duties: Designing, developing, and delivering firmware solutions. Responsibilities will include: Concept development for complex functions and systems. FPGA design and analysis. Production of material for design reviews. Development of test planning, integration, and design verification. Ensuring that all firmware designs follow the firmware processes. Skills needed : Experience in design techniques using VHDL. Experience in verification techniques using either VHDL or System Verilog/UVM. Experience in specifying timing and area constraints for efficient FPGA place and route. Ability to analyse system-level requirements and derive detailed firmware requirements. Degree (BSc, BEng, MEng, MSc, PhD, EngD) in Electrical & Electronic Engineering or similar engineering/science course. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
ECS Resource Group Limited
Skelmersdale, Lancashire
Mechanical Maintenance Technician Location: Skelmersdale Salary: £35,000 - £38,000 Permanent I am working with one of the world's largest and most well-known manufacturing companies who take a great deal of pride in their reputation for quality and innovation. As an employer, they have an equally good reputation which, having worked with them for well over a decade, we can talk about with confidence. There is now an exciting opportunity to join their team in Skelmersdale as a mechanically biased Maintenance Technician and join a business whose commitment to quality is second to none The Role Improving the overall reliability and performance of plant, personnel and production equipment and processes Tracking and reporting of process improvement results Ensuring production targets are met by optimising output & minmising defects Providing production line support in line with company goals and objectives Carrying out preventive maintenance and equipment breakdown repairs Establishing process conditions and carrying out in-line quality checks Process monitoring and controlling according to Statistical Process Control (SPC) method Analysing data to fault find and develop prioritised improvement plans for the platform Maintaining and developing the delivery of finished products in line with cost, quality and production schedule requirements Prioritising and promoting Health and Safety Awareness Training and mentoring staff in an approachable and constructive manner Fostering and developing excellent relationships with key business stakeholders on site Gathering & sharing best practices, both internally and externally Skills & Experience Required Apprentice trained or educated to OND Mechanical Engineering or similar. Accomplished technical production support experience. Skilled in turning, milling, welding and general workshop skills. Mechanical, pneumatic and basic electrical fault finding experience. Experience of high pressure air systems advantageous. Ability to read technical drawings Ability to follow SOP's and training processes Willingness to work shift work if required on an exceptional basis Working Hours: Mon - Thurs -7:50am - 4:45pm, Fri 7:50am - 12:10pm ECS Recruitment Group Ltd is acting as an Employment Agency in relation to this vacancy.
22/04/2025
Full time
Mechanical Maintenance Technician Location: Skelmersdale Salary: £35,000 - £38,000 Permanent I am working with one of the world's largest and most well-known manufacturing companies who take a great deal of pride in their reputation for quality and innovation. As an employer, they have an equally good reputation which, having worked with them for well over a decade, we can talk about with confidence. There is now an exciting opportunity to join their team in Skelmersdale as a mechanically biased Maintenance Technician and join a business whose commitment to quality is second to none The Role Improving the overall reliability and performance of plant, personnel and production equipment and processes Tracking and reporting of process improvement results Ensuring production targets are met by optimising output & minmising defects Providing production line support in line with company goals and objectives Carrying out preventive maintenance and equipment breakdown repairs Establishing process conditions and carrying out in-line quality checks Process monitoring and controlling according to Statistical Process Control (SPC) method Analysing data to fault find and develop prioritised improvement plans for the platform Maintaining and developing the delivery of finished products in line with cost, quality and production schedule requirements Prioritising and promoting Health and Safety Awareness Training and mentoring staff in an approachable and constructive manner Fostering and developing excellent relationships with key business stakeholders on site Gathering & sharing best practices, both internally and externally Skills & Experience Required Apprentice trained or educated to OND Mechanical Engineering or similar. Accomplished technical production support experience. Skilled in turning, milling, welding and general workshop skills. Mechanical, pneumatic and basic electrical fault finding experience. Experience of high pressure air systems advantageous. Ability to read technical drawings Ability to follow SOP's and training processes Willingness to work shift work if required on an exceptional basis Working Hours: Mon - Thurs -7:50am - 4:45pm, Fri 7:50am - 12:10pm ECS Recruitment Group Ltd is acting as an Employment Agency in relation to this vacancy.
ECS Resource Group Limited
Skelmersdale, Lancashire
Electrical Maintenance Technician Permanent Salary Range: Up to £46,360 including shift allowance Location: Skelmersdale I am working with one of the world's largest and most well known & respected manufacturing companies with a fantastic reputation globally for innovation and quality. They have an exciting opportunity to join their team in Skelmersdale as Maintenance Technician on a full time, permanent basis Responsibilities Tracking and reporting of process improvement results Improving the overall reliability and performance of plant, personnel and production equipment and processes Ensuring production targets are met, optimising output & minimising defects Providing production line support in line with company goals and objectives Preventive maintenance Equipment breakdown repairs Establishing process conditions In-line quality checks Process monitoring and controlling according to Statistical Process Control (SPC) method Analysing data to fault find and developing prioritised improvement plans for the platform Maintaining and developing the delivery of finished products in line with cost, quality and production schedule requirements Prioritizing and promoting Health and Safety awareness Training and mentoring staff in an approachable and constructive manner Fostering and developing excellent relationships with key business stakeholders Gathering & sharing best practice, both within the business and world class manufacturing sites Experience Required First accomplished technical production support experience. Electrical, mechanical, pneumatic, servo controls PLC fault finding (Omron preferred) Experience of robotics (ABB preferred), including experience of automated assembly production lines Experience of vision systems Ability to read electrical/mechanical drawings Ability to follow SOP's and training processes Ability and willingness to work a night shift if required Qualifications Electrical - 18th Edition ECS Recruitment Group Ltd is acting as an Employment Agency in relation to this vacancy.
22/04/2025
Full time
Electrical Maintenance Technician Permanent Salary Range: Up to £46,360 including shift allowance Location: Skelmersdale I am working with one of the world's largest and most well known & respected manufacturing companies with a fantastic reputation globally for innovation and quality. They have an exciting opportunity to join their team in Skelmersdale as Maintenance Technician on a full time, permanent basis Responsibilities Tracking and reporting of process improvement results Improving the overall reliability and performance of plant, personnel and production equipment and processes Ensuring production targets are met, optimising output & minimising defects Providing production line support in line with company goals and objectives Preventive maintenance Equipment breakdown repairs Establishing process conditions In-line quality checks Process monitoring and controlling according to Statistical Process Control (SPC) method Analysing data to fault find and developing prioritised improvement plans for the platform Maintaining and developing the delivery of finished products in line with cost, quality and production schedule requirements Prioritizing and promoting Health and Safety awareness Training and mentoring staff in an approachable and constructive manner Fostering and developing excellent relationships with key business stakeholders Gathering & sharing best practice, both within the business and world class manufacturing sites Experience Required First accomplished technical production support experience. Electrical, mechanical, pneumatic, servo controls PLC fault finding (Omron preferred) Experience of robotics (ABB preferred), including experience of automated assembly production lines Experience of vision systems Ability to read electrical/mechanical drawings Ability to follow SOP's and training processes Ability and willingness to work a night shift if required Qualifications Electrical - 18th Edition ECS Recruitment Group Ltd is acting as an Employment Agency in relation to this vacancy.
Electrical Site Technician - Staffordshire/Site Based - Competitive Salary VIQU have partnered with a leading organisation in the energy industry who are seeking a site technician to join their growing team! The role will play a vital role in delivering high-quality electrical protection and control systems for critical projects. Key Responsibilities of the Site Technician: Assemble and wire electrical protection and control systems using technical drawings, parts lists, and specifications. This includes: Cable installation, glanding, and termination of paired, multicore, copper, and fiber optic cables. Perform mechanical assembly, including cubicles, frameworks and cable tray/ladders. Maintain high-quality standards by checking your work, completing inspection test plans (ITPs), and addressing rework as required. Update issue logs and work with site supervisors, designers, or commissioning engineers to resolve any issues. Conduct equipment builds and configuration inspections, including: Electrical safety checks, continuity tests, point-to-point wiring checks, high voltage withstand tests, insulation resistance tests, power-up, and equipment functionality checks. Also complete isolations. Experience needed for the Site Technician: Strong hands-on experience in electrical assembly, E, C & I installation and panel wiring (Substation Control Systems, Protection systems). Must have worked on customer sites. Ideally experience with mechanical assembly. Familiarity with technical drawings, schematics, and parts lists. Full UK driving license and willingness to work on customer sites. To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Jack Mcmanus , by exploring the VIQU IT Recruitment website . If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply).
22/04/2025
Full time
Electrical Site Technician - Staffordshire/Site Based - Competitive Salary VIQU have partnered with a leading organisation in the energy industry who are seeking a site technician to join their growing team! The role will play a vital role in delivering high-quality electrical protection and control systems for critical projects. Key Responsibilities of the Site Technician: Assemble and wire electrical protection and control systems using technical drawings, parts lists, and specifications. This includes: Cable installation, glanding, and termination of paired, multicore, copper, and fiber optic cables. Perform mechanical assembly, including cubicles, frameworks and cable tray/ladders. Maintain high-quality standards by checking your work, completing inspection test plans (ITPs), and addressing rework as required. Update issue logs and work with site supervisors, designers, or commissioning engineers to resolve any issues. Conduct equipment builds and configuration inspections, including: Electrical safety checks, continuity tests, point-to-point wiring checks, high voltage withstand tests, insulation resistance tests, power-up, and equipment functionality checks. Also complete isolations. Experience needed for the Site Technician: Strong hands-on experience in electrical assembly, E, C & I installation and panel wiring (Substation Control Systems, Protection systems). Must have worked on customer sites. Ideally experience with mechanical assembly. Familiarity with technical drawings, schematics, and parts lists. Full UK driving license and willingness to work on customer sites. To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Jack Mcmanus , by exploring the VIQU IT Recruitment website . If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply).
Job Title: Site Supervisor Location: Stone (on-site)- must have full UK Driving License. Salary: market- related VIQU has partnered with a top engineering company seeking a Site Supervisor to create and manage project plans. The successful candidate will have an electrical engineering background with experience with the National Grid substations or similar. This position requires two days on-site in Stone, offering a competitive salary. They also offer a competitive benefits package along with internal programs The role will involve day to day supervision of the electrical contractors as well as assisting onsite. Key Responsibilities of the Site Supervisor: Supervised installation and customer acceptance of Substation Control & Protection Systems, ensuring compliance with safety standards and site protocols. Led site teams (1-5 engineers) through installation and commissioning phases. Managed subcontractors for cabling and minor electrical/mechanical works. Conducted client progress meetings and maintained project documentation. Oversaw site welfare and health & safety compliance. Coordinated with project teams to ensure proper resource planning and delivery to scope. Performed inspections, completed ITPs, and flagged quality issues. Supported electrical installation, testing, and commissioning activities. Produced electrical drawings, specifications, and site survey reports. Prepared Risk Assessments and Method Statements. Key Requirements of the Site Supervisor: Previous experience supervising E, C and I installation for Control or Protection systems. National Gridwork experience Experience of circuit diagrams or assembly prints First Aid at work certified Certifications: SSSTS, Arc Flash, PASMA, 18th Edition, Impressed Voltages, Asbestos Awareness, Manual Handling, Confined Space Awareness, LOTO Training To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Phoebe Rees by exploring the VIQU IT Recruitment website . If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply).
22/04/2025
Full time
Job Title: Site Supervisor Location: Stone (on-site)- must have full UK Driving License. Salary: market- related VIQU has partnered with a top engineering company seeking a Site Supervisor to create and manage project plans. The successful candidate will have an electrical engineering background with experience with the National Grid substations or similar. This position requires two days on-site in Stone, offering a competitive salary. They also offer a competitive benefits package along with internal programs The role will involve day to day supervision of the electrical contractors as well as assisting onsite. Key Responsibilities of the Site Supervisor: Supervised installation and customer acceptance of Substation Control & Protection Systems, ensuring compliance with safety standards and site protocols. Led site teams (1-5 engineers) through installation and commissioning phases. Managed subcontractors for cabling and minor electrical/mechanical works. Conducted client progress meetings and maintained project documentation. Oversaw site welfare and health & safety compliance. Coordinated with project teams to ensure proper resource planning and delivery to scope. Performed inspections, completed ITPs, and flagged quality issues. Supported electrical installation, testing, and commissioning activities. Produced electrical drawings, specifications, and site survey reports. Prepared Risk Assessments and Method Statements. Key Requirements of the Site Supervisor: Previous experience supervising E, C and I installation for Control or Protection systems. National Gridwork experience Experience of circuit diagrams or assembly prints First Aid at work certified Certifications: SSSTS, Arc Flash, PASMA, 18th Edition, Impressed Voltages, Asbestos Awareness, Manual Handling, Confined Space Awareness, LOTO Training To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Phoebe Rees by exploring the VIQU IT Recruitment website . If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply).
Site Manager - Nuclear Division - Competitive Salary Location: Staffordshire VIQU have partnered with a company that has been leading the charge in advanced system integration for decades. The Role: We're looking for an experienced Site Manager with strong electrical engineering expertise to join our growing nuclear division. You'll split your time between our headquarters and client sites, taking charge of delivering nuclear projects that meet our exacting standards for safety, cost-efficiency and quality. What You'll Do: Lead installation and commissioning of Control System projects in nuclear environments Manage and motivate project teams of 1-5+ engineers Oversee installation sub-contractors Interface with clients through regular progress meetings Collaborate with our Health & Safety Manager Create technical documentation including Risk Assessments and Method Statements Ensure project delivery meets time, cost and quality targets Must-Have Requirements: CCNSG Safety Passport Supervisor certification Recognized H&S training (IOSH, CITB, RoSPA, BSC) First Aid at Work Certificate CDM Training Proven track record in nuclear solution delivery NEC3/4 contract awareness Full UK driving license Security clearance (or ability to obtain) Desirable Skills: HND or higher qualification IOSH SMSTS certificate CITB Site Managers Safety Training Scheme NEBOSH National Construction certification Electrical fault-finding capabilities AutoCAD proficiency Nuclear Licensed site experience What We're Looking For: Strong leadership and communication skills Excellent project management capabilities Sharp attention to detail Proven ability to work under pressure Outstanding safety consciousness What We Offer: 28 days holiday + bank holidays Flexible working arrangements Comprehensive pension scheme Private healthcare Life assurance Professional development support IEng/CEng qualification support Green initiatives (car scheme, cycle to work) Mental health support programme Site Manager - Nuclear Division - Competitive Salary Location: Staffordshire To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Aaron Chiverton on (see below) If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply).
22/04/2025
Full time
Site Manager - Nuclear Division - Competitive Salary Location: Staffordshire VIQU have partnered with a company that has been leading the charge in advanced system integration for decades. The Role: We're looking for an experienced Site Manager with strong electrical engineering expertise to join our growing nuclear division. You'll split your time between our headquarters and client sites, taking charge of delivering nuclear projects that meet our exacting standards for safety, cost-efficiency and quality. What You'll Do: Lead installation and commissioning of Control System projects in nuclear environments Manage and motivate project teams of 1-5+ engineers Oversee installation sub-contractors Interface with clients through regular progress meetings Collaborate with our Health & Safety Manager Create technical documentation including Risk Assessments and Method Statements Ensure project delivery meets time, cost and quality targets Must-Have Requirements: CCNSG Safety Passport Supervisor certification Recognized H&S training (IOSH, CITB, RoSPA, BSC) First Aid at Work Certificate CDM Training Proven track record in nuclear solution delivery NEC3/4 contract awareness Full UK driving license Security clearance (or ability to obtain) Desirable Skills: HND or higher qualification IOSH SMSTS certificate CITB Site Managers Safety Training Scheme NEBOSH National Construction certification Electrical fault-finding capabilities AutoCAD proficiency Nuclear Licensed site experience What We're Looking For: Strong leadership and communication skills Excellent project management capabilities Sharp attention to detail Proven ability to work under pressure Outstanding safety consciousness What We Offer: 28 days holiday + bank holidays Flexible working arrangements Comprehensive pension scheme Private healthcare Life assurance Professional development support IEng/CEng qualification support Green initiatives (car scheme, cycle to work) Mental health support programme Site Manager - Nuclear Division - Competitive Salary Location: Staffordshire To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Aaron Chiverton on (see below) If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply).
Helvetica Partners Sarl
Sankt Gallen, Sankt Gallen
We are currently looking on behalf of one of our important clients for a RF System Engineer (German Speaking). The role is a permanent position based St. Gallen Canton with one day per week home office. Your Role: Designs new Solutions for Radiofrequency (RF) Connectivity. Develop innovative designs of miniaturized high-frequency connectors & cable assemblies using various technologies & expertise from micromechanics & precision engineering in combination with classical mechanical engineering. Plan & implement product development projects. Develop & implement new technologies, processes, product concepts & products in cooperation with product management, strategy & business development, process engineering specialists, customers & suppliers. Proactively supporting the team in expanding & deepening expertise in the design of miniaturized electromechanical systems (especially RF connectors), the application of new technologies & the use of micro-assembly processes, methods & tools. Apply Design for Manufacturing, Design for Assembly & Design to Cost approaches. Perform mechanical &/or electrical design & simulation tasks using CAD & FEM tools. Create & maintain documents in PDM & ERP systems, eg data sheets, parts lists, overview drawings, part drawings & control plans. Your Skills & Experience: At least 5 years of professional experience in Product System Development, including experience in Miniature & Microsystem Design. Any knowledge of RF/Microwave Technology &/or RF Cables, Connectors & Assemblies is considered very advantageous. A good knowledge of the Technologies & Processes used for Industrial Micro-Manufacturing & Assembly Processes (including approaches to the production of Functional Models, Prototypes & Series Production). A sound technical expertise in one or more of the following areas: MEMS Development, RF Technology, System Design, Manufacturing Processes (including CAD/Simulation/Modeling/Testing). Skilled in handling 2D & 3D CAD Systems (preferably CATIA) &/or FEM tools (eg Ansys) when developing new products. A good knowledge of Microsoft, CAD & FEM Simulation. Strong experience in Project Management. Ideally experienced in PDM & ERP. Your Profile: Completed University Degree in the areas of Mechanical Engineering, Microsystems Engineering, Physics, Electrical Engineering or Similar. Open, innovative, analytical, good communication skills & goal, solution & customer-oriented. Fluent in English & a very good command of German (to at least level B2 spoken & written).
18/04/2025
Full time
We are currently looking on behalf of one of our important clients for a RF System Engineer (German Speaking). The role is a permanent position based St. Gallen Canton with one day per week home office. Your Role: Designs new Solutions for Radiofrequency (RF) Connectivity. Develop innovative designs of miniaturized high-frequency connectors & cable assemblies using various technologies & expertise from micromechanics & precision engineering in combination with classical mechanical engineering. Plan & implement product development projects. Develop & implement new technologies, processes, product concepts & products in cooperation with product management, strategy & business development, process engineering specialists, customers & suppliers. Proactively supporting the team in expanding & deepening expertise in the design of miniaturized electromechanical systems (especially RF connectors), the application of new technologies & the use of micro-assembly processes, methods & tools. Apply Design for Manufacturing, Design for Assembly & Design to Cost approaches. Perform mechanical &/or electrical design & simulation tasks using CAD & FEM tools. Create & maintain documents in PDM & ERP systems, eg data sheets, parts lists, overview drawings, part drawings & control plans. Your Skills & Experience: At least 5 years of professional experience in Product System Development, including experience in Miniature & Microsystem Design. Any knowledge of RF/Microwave Technology &/or RF Cables, Connectors & Assemblies is considered very advantageous. A good knowledge of the Technologies & Processes used for Industrial Micro-Manufacturing & Assembly Processes (including approaches to the production of Functional Models, Prototypes & Series Production). A sound technical expertise in one or more of the following areas: MEMS Development, RF Technology, System Design, Manufacturing Processes (including CAD/Simulation/Modeling/Testing). Skilled in handling 2D & 3D CAD Systems (preferably CATIA) &/or FEM tools (eg Ansys) when developing new products. A good knowledge of Microsoft, CAD & FEM Simulation. Strong experience in Project Management. Ideally experienced in PDM & ERP. Your Profile: Completed University Degree in the areas of Mechanical Engineering, Microsystems Engineering, Physics, Electrical Engineering or Similar. Open, innovative, analytical, good communication skills & goal, solution & customer-oriented. Fluent in English & a very good command of German (to at least level B2 spoken & written).
We are currently looking on behalf of one of our important clients for an Electromagnetics Engineer. The role is a permanent position based in Zürich. Your Role: Participate in a range of research projects in electromagnetics & associated applications. Provide scientific contributions to the theory, modelling, optimization & application of the EM near-field. Develop novel instrumentation, computational methods & characterization procedures. Participate in national & international standard activities (IEC, IEEE, etc.). Collaborate with external research partners & provision hardware support for customers. Your Skills & Experience: At least 2 years of professional experience with EM Simulation Software (eg COMSOL, ANSYS) and/or EM Measurement Instruments. Skilled & experience in Programming in C++ and/or Python. Ideally experienced in at least one of the following areas: Wireless Communication Systems, Radiofrequency Antenna Simulation & Measurements, Electrodynamics, Numerical Simulation of EM fields, Biomedical Engineering, Error Analysis & Uncertainty Conventions. Your Profile: Completed University Education, preferable to PhD level, in Electrical Engineering or Physics. Motivated to take on responsibilities & highly quality & team-oriented. Collaborative, good communication skills & sensitive to customer needs. Fluent in English (spoken & written), German language skills are considered a plus.
18/04/2025
Full time
We are currently looking on behalf of one of our important clients for an Electromagnetics Engineer. The role is a permanent position based in Zürich. Your Role: Participate in a range of research projects in electromagnetics & associated applications. Provide scientific contributions to the theory, modelling, optimization & application of the EM near-field. Develop novel instrumentation, computational methods & characterization procedures. Participate in national & international standard activities (IEC, IEEE, etc.). Collaborate with external research partners & provision hardware support for customers. Your Skills & Experience: At least 2 years of professional experience with EM Simulation Software (eg COMSOL, ANSYS) and/or EM Measurement Instruments. Skilled & experience in Programming in C++ and/or Python. Ideally experienced in at least one of the following areas: Wireless Communication Systems, Radiofrequency Antenna Simulation & Measurements, Electrodynamics, Numerical Simulation of EM fields, Biomedical Engineering, Error Analysis & Uncertainty Conventions. Your Profile: Completed University Education, preferable to PhD level, in Electrical Engineering or Physics. Motivated to take on responsibilities & highly quality & team-oriented. Collaborative, good communication skills & sensitive to customer needs. Fluent in English (spoken & written), German language skills are considered a plus.
Site Manager | Energy Sector | Controls & Automation Commissioning | £Neg (Enquire for details) + Benefits | Stone/Sites MERITUS are working with a growing Systems Integration Consultancy operating in the Energy sector. They're looking for an experienced Site Manager with a strong background in Electrical Engineering. If successful you will play a key role in the installation and customer acceptance of Substation Control and Protection System projects. Your expertise in managing installation sub-contractors, leading project teams, and liaising with clients and safety managers will be essential for ensuring project success. To be successful you will need strong background in electrical engineering including Control Panel Design, E,C & I & heavy experience managing National Grid substations. The company is based in Stone & the role will require travel to customer sites. Responsibilities: Manage the installation and customer acceptance of Substation Control and Protection System projects, adhering to National Grid safety standards and site practices. Lead and motivate a team of software and hardware engineers during the site installation and commissioning phases. Control and oversee installation sub-contractors to ensure compliance with project specifications and safety standards. Conduct regular report and progress meetings with clients, producing related documentation and minutes. Required Skills: Proven experience in managing E, C & I installation and commissioning activities on National Grid sites. Current "National Grid Competent Person" certification with either TP144 or TP137.11 certification. Successful completion of Client Contractors National Safety Group Safety Passport Supervisor training and First Aid at Work Certificate. Willingness to travel and work away at customer sites as required. Benefits: Competitive salary (enquire for details) Car allowance (Circa 550 per month) Private medical insurance 25 days holiday (bank holidays on top) flexible working options Got your attention? If you believe that you have the skills and experience for the role then please get in touch. We also offer a referral scheme for any candidates whose details are passed to us that we successfully place. If you have any further questions then please contact Ryan Harris at MERITUS Talent.
17/04/2025
Full time
Site Manager | Energy Sector | Controls & Automation Commissioning | £Neg (Enquire for details) + Benefits | Stone/Sites MERITUS are working with a growing Systems Integration Consultancy operating in the Energy sector. They're looking for an experienced Site Manager with a strong background in Electrical Engineering. If successful you will play a key role in the installation and customer acceptance of Substation Control and Protection System projects. Your expertise in managing installation sub-contractors, leading project teams, and liaising with clients and safety managers will be essential for ensuring project success. To be successful you will need strong background in electrical engineering including Control Panel Design, E,C & I & heavy experience managing National Grid substations. The company is based in Stone & the role will require travel to customer sites. Responsibilities: Manage the installation and customer acceptance of Substation Control and Protection System projects, adhering to National Grid safety standards and site practices. Lead and motivate a team of software and hardware engineers during the site installation and commissioning phases. Control and oversee installation sub-contractors to ensure compliance with project specifications and safety standards. Conduct regular report and progress meetings with clients, producing related documentation and minutes. Required Skills: Proven experience in managing E, C & I installation and commissioning activities on National Grid sites. Current "National Grid Competent Person" certification with either TP144 or TP137.11 certification. Successful completion of Client Contractors National Safety Group Safety Passport Supervisor training and First Aid at Work Certificate. Willingness to travel and work away at customer sites as required. Benefits: Competitive salary (enquire for details) Car allowance (Circa 550 per month) Private medical insurance 25 days holiday (bank holidays on top) flexible working options Got your attention? If you believe that you have the skills and experience for the role then please get in touch. We also offer a referral scheme for any candidates whose details are passed to us that we successfully place. If you have any further questions then please contact Ryan Harris at MERITUS Talent.
Location: Birmingham Job: Field Based Coffee Engineer. Please note you will be travelling around 80 miles as this is field based. Hours: 40+ hrs a week My clients business was established over 30 years following an already 20+ year history in designing, manufacturing, maintaining and distributing coffee machines independently to some of the most recognised and well known business in Britain and Italy. With over 50 years' experience they can confidently tailor to their customer's every needs, resulting to attracting clients all over the world, and supplying to almost 100 countries to date. To ensure they are delivering, if not exceeding their clients expectations, they are looking for a Field Based Coffee Engineer, specifically to maintain and service their coffee machines within the UK. What You'll Be Doing: Carrying out diagnostic repairs ensuring all equipment is left in perfect working order. Carrying out preventative maintenance and yearly PVIs on steam boilers. Attend customer sites within agreed SLAs and complete brand standard checks Provide technical support when installing new coffee machines on site and/or follow up support on maintained equipment. Liaise with the inhouse team when needed. Respect and maintain all company tools, equipment, and vehicle to the highest standards, reporting anything deemed unsafe to use. Be a fantastic and approachable individual when dealing with our clients face to face or via other communication methods. What We Are Looking For From You: Employment history maintaining barista equipment. Strong problem-solving skills with an electrical/mechanical background. A positive and enthusiastic individual with a genuine passion for working with machines in a customer facing environment. Computer literacy and clean UK driving licence. As this is a field based role, the requirements to fulfil the expectations of the role will be provided. These will be confirmed and discussed more in detail Please note applicants will only be considered if they meet the starting criteria as per the clients request: Have Full British Rights to work only. Visas, of any sort or require sponsorship before 2030 will not be considered. Are a UK resident and have proof of this. Have a UK Clean driving licence
17/04/2025
Full time
Location: Birmingham Job: Field Based Coffee Engineer. Please note you will be travelling around 80 miles as this is field based. Hours: 40+ hrs a week My clients business was established over 30 years following an already 20+ year history in designing, manufacturing, maintaining and distributing coffee machines independently to some of the most recognised and well known business in Britain and Italy. With over 50 years' experience they can confidently tailor to their customer's every needs, resulting to attracting clients all over the world, and supplying to almost 100 countries to date. To ensure they are delivering, if not exceeding their clients expectations, they are looking for a Field Based Coffee Engineer, specifically to maintain and service their coffee machines within the UK. What You'll Be Doing: Carrying out diagnostic repairs ensuring all equipment is left in perfect working order. Carrying out preventative maintenance and yearly PVIs on steam boilers. Attend customer sites within agreed SLAs and complete brand standard checks Provide technical support when installing new coffee machines on site and/or follow up support on maintained equipment. Liaise with the inhouse team when needed. Respect and maintain all company tools, equipment, and vehicle to the highest standards, reporting anything deemed unsafe to use. Be a fantastic and approachable individual when dealing with our clients face to face or via other communication methods. What We Are Looking For From You: Employment history maintaining barista equipment. Strong problem-solving skills with an electrical/mechanical background. A positive and enthusiastic individual with a genuine passion for working with machines in a customer facing environment. Computer literacy and clean UK driving licence. As this is a field based role, the requirements to fulfil the expectations of the role will be provided. These will be confirmed and discussed more in detail Please note applicants will only be considered if they meet the starting criteria as per the clients request: Have Full British Rights to work only. Visas, of any sort or require sponsorship before 2030 will not be considered. Are a UK resident and have proof of this. Have a UK Clean driving licence
Our client is seeking IP Deployment Engineer in Dublin, Ireland. This is a 12 months FTE hybrid role - 1/2 days per week Responsibilities: Collaborate with Program Managers and Network Engineering to define site design requirements and develop project implementation and migration plans. This includes creating and reviewing deployment packages such as Engineering Design Packages (EDP), Scope of Works (SoW), Method of Procedures (MoP), Rack Face Elevations (RFE), and Bill of Materials (BoM). Provide technical leadership and guidance, both remotely and on-site, for network upgrades and new PoP site builds. This covers areas like power, cooling, rack layout, cable management, equipment installation, network configuration, testing, and production traffic handoff. Calculate and document power and space requirements for equipment at multiple PoP sites. Coordinate with Colocation Vendors, local Engineering, and Facilities Operations to meet these requirements. Actively contribute to the improvement of documentation, automation, and processes. Design cages and racks, understanding the current and future needs of PoP infrastructure. Minimum Qualifications: Over 5 years of experience in deploying and supporting network hardware platforms and architectures, including Cisco and/or Juniper Routers/Switches. Proficiency in configuring and troubleshooting IP routing/switching technologies and protocols such as TCP/IP, BGP, ISIS, OSPF, and MPLS in a dual-stack IPv4/6 environment. Experience in coordinating and executing large-scale hardware installations and configurations. Demonstrated ability to lead and execute complex network deployment projects with meticulous attention to detail. Strong interaction skills with vendors and external parties to ensure project completion. Experience with cage design using tools like MS Visio/Omnigraffle for layouts and rack elevations. Familiarity with Data Center electrical and cooling configurations (IEC, NEMA, AC/DC power, and power redundancy scenarios). Experience with Linux/OS tools. Ability to work effectively in a global team environment with minimal supervision. Preferred Qualifications: Certifications such as CCNP or JNCIP preferred; Expert-level certifications are a plus. Experience with Scripting and automation. Experience in coordinating and executing projects involving the deployment of optical communication equipment (DWDM), site preparations, and OTDR testing is desirable.
17/04/2025
Full time
Our client is seeking IP Deployment Engineer in Dublin, Ireland. This is a 12 months FTE hybrid role - 1/2 days per week Responsibilities: Collaborate with Program Managers and Network Engineering to define site design requirements and develop project implementation and migration plans. This includes creating and reviewing deployment packages such as Engineering Design Packages (EDP), Scope of Works (SoW), Method of Procedures (MoP), Rack Face Elevations (RFE), and Bill of Materials (BoM). Provide technical leadership and guidance, both remotely and on-site, for network upgrades and new PoP site builds. This covers areas like power, cooling, rack layout, cable management, equipment installation, network configuration, testing, and production traffic handoff. Calculate and document power and space requirements for equipment at multiple PoP sites. Coordinate with Colocation Vendors, local Engineering, and Facilities Operations to meet these requirements. Actively contribute to the improvement of documentation, automation, and processes. Design cages and racks, understanding the current and future needs of PoP infrastructure. Minimum Qualifications: Over 5 years of experience in deploying and supporting network hardware platforms and architectures, including Cisco and/or Juniper Routers/Switches. Proficiency in configuring and troubleshooting IP routing/switching technologies and protocols such as TCP/IP, BGP, ISIS, OSPF, and MPLS in a dual-stack IPv4/6 environment. Experience in coordinating and executing large-scale hardware installations and configurations. Demonstrated ability to lead and execute complex network deployment projects with meticulous attention to detail. Strong interaction skills with vendors and external parties to ensure project completion. Experience with cage design using tools like MS Visio/Omnigraffle for layouts and rack elevations. Familiarity with Data Center electrical and cooling configurations (IEC, NEMA, AC/DC power, and power redundancy scenarios). Experience with Linux/OS tools. Ability to work effectively in a global team environment with minimal supervision. Preferred Qualifications: Certifications such as CCNP or JNCIP preferred; Expert-level certifications are a plus. Experience with Scripting and automation. Experience in coordinating and executing projects involving the deployment of optical communication equipment (DWDM), site preparations, and OTDR testing is desirable.
Job Title: MES Engineer (Contract Role) Location: Ireland About the Role: We are seeking a highly skilled and experienced MES Engineer to join our clients team on a contract basis. The successful candidate will be responsible for managing the automation strategy and implementation plan for EBM/MES, leading large-scale programs, and coordinating multiple small projects with complex features. This role requires a strong background in engineering and a deep understanding of MES systems in FDA-regulated manufacturing environments. Responsibilities: Manage the automation strategy and implementation plan for EBM/MES. Lead large-scale programs and multiple small projects with complex features. Plan and schedule project implementation and define the scope of work. Perform financial planning and assist in project approval analysis. Coordinate status and solutions with other departments for successful implementation. Lead EBM system code development for multiple scale level projects. Gather and document business user requirements and align them with software capabilities. Develop test cases, scripts, and protocols to document understanding between code and business requirements. Maintain system functional and design specifications according to quality system procedures. Provide guidance and training on MES system procedures to team members. Solve MES system issues impacting production and coordinate support for resolution. Requirements: Bachelor's degree in engineering discipline required; Computer, Chemical, Mechanical, or Electrical Engineering preferred. 3+ years of related experience in managing MES systems in FDA regulated manufacturing settings. Knowledge of GMPs, FDA guidelines, and validation processes. 3+ years of experience in process design, controls engineering, and process improvement. Experience with Siemens Opcenter Execution Pharma. Why Join Us: Competitive contract rate. Opportunity to work on cutting-edge projects in a dynamic and innovative environment. Enhance your skills and experience with a leading company in the industry. Please visit our website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. To find out more about Real, please visit our website Real Staffing, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy | Registered office | 8 Bishopsgate, London, EC2N 4BQ, United Kingdom | Partnership Number | OC387148 England and Wales
17/04/2025
Project-based
Job Title: MES Engineer (Contract Role) Location: Ireland About the Role: We are seeking a highly skilled and experienced MES Engineer to join our clients team on a contract basis. The successful candidate will be responsible for managing the automation strategy and implementation plan for EBM/MES, leading large-scale programs, and coordinating multiple small projects with complex features. This role requires a strong background in engineering and a deep understanding of MES systems in FDA-regulated manufacturing environments. Responsibilities: Manage the automation strategy and implementation plan for EBM/MES. Lead large-scale programs and multiple small projects with complex features. Plan and schedule project implementation and define the scope of work. Perform financial planning and assist in project approval analysis. Coordinate status and solutions with other departments for successful implementation. Lead EBM system code development for multiple scale level projects. Gather and document business user requirements and align them with software capabilities. Develop test cases, scripts, and protocols to document understanding between code and business requirements. Maintain system functional and design specifications according to quality system procedures. Provide guidance and training on MES system procedures to team members. Solve MES system issues impacting production and coordinate support for resolution. Requirements: Bachelor's degree in engineering discipline required; Computer, Chemical, Mechanical, or Electrical Engineering preferred. 3+ years of related experience in managing MES systems in FDA regulated manufacturing settings. Knowledge of GMPs, FDA guidelines, and validation processes. 3+ years of experience in process design, controls engineering, and process improvement. Experience with Siemens Opcenter Execution Pharma. Why Join Us: Competitive contract rate. Opportunity to work on cutting-edge projects in a dynamic and innovative environment. Enhance your skills and experience with a leading company in the industry. Please visit our website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. To find out more about Real, please visit our website Real Staffing, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy | Registered office | 8 Bishopsgate, London, EC2N 4BQ, United Kingdom | Partnership Number | OC387148 England and Wales
We are a Global Recruitment specialist that provides support to the clients across EMEA, APAC, US and Canada Job title: Electrical Engineer (power/energy) Work Location: Birmingham- Hybrid Duration: 6 months contract initiall Rate: to £480/day on PAYE General Project Management requires general business knowledge to plan, organize, and control resources, procedures, and timing for an administrative or business process including: Organizing project teams, assigning individual responsibilities, developing project schedules, and determining resource requirements. Monitoring and reporting on the status of projects including cost, timing, and staffing. Ensuring adherence to internal and external quality standards (eg, International Standards Organization). Identifying/resolving obstacles to completing project on time and to budget. May include work managing multiple, interrelated projects (including business transformation projects). On some projects, the work may include integrating vendor tasks into the project plan and tracking and reviewing vendor deliverables. A Senior Professional (P3) applies advanced knowledge of job area typically obtained through advanced education and work experience. Responsibilities may include: Managing projects/processes, working independently with limited supervision. Coaching and reviewing the work of lower level professionals. Problems faced are difficult and sometimes complex. Additional Hiring Information Lead Engineers with experience as a CDAE/LCDAE on National Grid projects or a proven track record of delivering large and complex high-voltage projects for major clients in the UK. Role Outline To coordinate and support the design team during project design and execution phases, and to support the tendering team to ensure that safe, robust, and optimal designs and documentation are produced. Main Accountabilities/Position Interactions To coordinate the design team across all disciplines. To liaise with project management on engineering budgets and to provide forecast cost to complete estimates and associated justification to changes in expenditure. To manage the programme and to interface with the planning engineers for design. Providing forecasts for completion and resource planning. To approve documentation in accordance with the contractual requirements of the project. To coordinate and chair design reviews and hazard reviews. To identify and manage additional risks across functions that may not be apparent to individual Designers. Evaluates risks and opportunities, strategizes mitigation of the risks. Supports the Project Manager in overall project risk and opportunity assessments and implementation of resulting actions. To undertake the Principal Designer Representative on projects. Works with customers to shape and deliver solutions, seeking feedback and innovating with the customer to drive and deliver improvements. Oversees the creation of subcontracts and manages the subcontractors jointly with other involved functions, including supply chain management. Client People Must offer a flexible approach to work tasks, will be prepared to work additional hours as the project may require ensuring delivery of successful design solutions. A full team player with ability to work within a multi-national, multi-cultural team. To mentor other team members as required client Organisation Will be focused on value engineering, ensuring full consultation with all design stakeholders Strive for continuous improvement in implementation standards and costs Enact the legislative duties of a designer and develop designs which eliminate and reduce risks to health, safety and the environment Customer To hold and participate in design and hazard reviews and Meetings with Suppliers, Contractors and Clients. To strengthen customer relationships through presentation and delivery of successful design solutions. Line Managers for resourcing, domain knowledge, training and issues/conflict resolution Other Engineering functions, primary, civils, commissioning, engineering support and design team leaders Commissioning and Test Engineers. Customers and Assurance for design review Suppliers for technical review Wider project teams incl. Project Managers, Planning, Tendering and Supply Chain Challenges Customer satisfaction Working to defined budgetary objectives Achieving successful design solutions and implementing them to the full satisfaction of all stakeholders Qualifications, Knowledge, Skills and Experience Essential 5 years Electricity supply industry experience Knowledge of Transmission or Distribution practices (400kV to 11 kV) HNC/HND in electrical engineering or equivalent Good team work, Analytical and communication skills Capable of working to tight time scales Commercial acumen Desirable Degree qualification in Electrical Power Engineering
17/04/2025
Project-based
We are a Global Recruitment specialist that provides support to the clients across EMEA, APAC, US and Canada Job title: Electrical Engineer (power/energy) Work Location: Birmingham- Hybrid Duration: 6 months contract initiall Rate: to £480/day on PAYE General Project Management requires general business knowledge to plan, organize, and control resources, procedures, and timing for an administrative or business process including: Organizing project teams, assigning individual responsibilities, developing project schedules, and determining resource requirements. Monitoring and reporting on the status of projects including cost, timing, and staffing. Ensuring adherence to internal and external quality standards (eg, International Standards Organization). Identifying/resolving obstacles to completing project on time and to budget. May include work managing multiple, interrelated projects (including business transformation projects). On some projects, the work may include integrating vendor tasks into the project plan and tracking and reviewing vendor deliverables. A Senior Professional (P3) applies advanced knowledge of job area typically obtained through advanced education and work experience. Responsibilities may include: Managing projects/processes, working independently with limited supervision. Coaching and reviewing the work of lower level professionals. Problems faced are difficult and sometimes complex. Additional Hiring Information Lead Engineers with experience as a CDAE/LCDAE on National Grid projects or a proven track record of delivering large and complex high-voltage projects for major clients in the UK. Role Outline To coordinate and support the design team during project design and execution phases, and to support the tendering team to ensure that safe, robust, and optimal designs and documentation are produced. Main Accountabilities/Position Interactions To coordinate the design team across all disciplines. To liaise with project management on engineering budgets and to provide forecast cost to complete estimates and associated justification to changes in expenditure. To manage the programme and to interface with the planning engineers for design. Providing forecasts for completion and resource planning. To approve documentation in accordance with the contractual requirements of the project. To coordinate and chair design reviews and hazard reviews. To identify and manage additional risks across functions that may not be apparent to individual Designers. Evaluates risks and opportunities, strategizes mitigation of the risks. Supports the Project Manager in overall project risk and opportunity assessments and implementation of resulting actions. To undertake the Principal Designer Representative on projects. Works with customers to shape and deliver solutions, seeking feedback and innovating with the customer to drive and deliver improvements. Oversees the creation of subcontracts and manages the subcontractors jointly with other involved functions, including supply chain management. Client People Must offer a flexible approach to work tasks, will be prepared to work additional hours as the project may require ensuring delivery of successful design solutions. A full team player with ability to work within a multi-national, multi-cultural team. To mentor other team members as required client Organisation Will be focused on value engineering, ensuring full consultation with all design stakeholders Strive for continuous improvement in implementation standards and costs Enact the legislative duties of a designer and develop designs which eliminate and reduce risks to health, safety and the environment Customer To hold and participate in design and hazard reviews and Meetings with Suppliers, Contractors and Clients. To strengthen customer relationships through presentation and delivery of successful design solutions. Line Managers for resourcing, domain knowledge, training and issues/conflict resolution Other Engineering functions, primary, civils, commissioning, engineering support and design team leaders Commissioning and Test Engineers. Customers and Assurance for design review Suppliers for technical review Wider project teams incl. Project Managers, Planning, Tendering and Supply Chain Challenges Customer satisfaction Working to defined budgetary objectives Achieving successful design solutions and implementing them to the full satisfaction of all stakeholders Qualifications, Knowledge, Skills and Experience Essential 5 years Electricity supply industry experience Knowledge of Transmission or Distribution practices (400kV to 11 kV) HNC/HND in electrical engineering or equivalent Good team work, Analytical and communication skills Capable of working to tight time scales Commercial acumen Desirable Degree qualification in Electrical Power Engineering
Junior Electronics Technician Location: Nottingham (On-Site) Salary: £30,000 - £35,000 Please note: Sponsorship is not available for this role I'm currently recruiting on behalf of a forward-thinking engineering SME based in Nottingham whose innovative electronics technology is genuinely saving lives. They're looking to add a Junior Electronics Technician to their growing team - someone hands-on, with a solid foundation in electronics and a keen eye for detail. This is a fantastic opportunity to join a company where your work will have a real-world, life-saving impact. Key Responsibilities: Diagnose, repair, and maintain electronic systems and equipment Assemble and test electronic components and circuits Uphold quality control standards and ensure safety compliance What They're Looking For: Strong fault-finding and soldering skills Ability to confidently read and interpret circuit diagrams and schematics A proactive, detail-oriented approach and willingness to learn They're ideally looking for someone with a couple of years of commercial experience, but there's flexibility for the right candidate with a strong technical foundation and the right attitude. If you're looking for a role where you can make a difference, develop your skills, and be part of an ambitious and supportive engineering team - I'd love to hear from you.
16/04/2025
Full time
Junior Electronics Technician Location: Nottingham (On-Site) Salary: £30,000 - £35,000 Please note: Sponsorship is not available for this role I'm currently recruiting on behalf of a forward-thinking engineering SME based in Nottingham whose innovative electronics technology is genuinely saving lives. They're looking to add a Junior Electronics Technician to their growing team - someone hands-on, with a solid foundation in electronics and a keen eye for detail. This is a fantastic opportunity to join a company where your work will have a real-world, life-saving impact. Key Responsibilities: Diagnose, repair, and maintain electronic systems and equipment Assemble and test electronic components and circuits Uphold quality control standards and ensure safety compliance What They're Looking For: Strong fault-finding and soldering skills Ability to confidently read and interpret circuit diagrams and schematics A proactive, detail-oriented approach and willingness to learn They're ideally looking for someone with a couple of years of commercial experience, but there's flexibility for the right candidate with a strong technical foundation and the right attitude. If you're looking for a role where you can make a difference, develop your skills, and be part of an ambitious and supportive engineering team - I'd love to hear from you.
Mechanical Engineer/Electrical Engineer - Rail - 12-18 months FTC A qualified Mechanical or Electrical Engineer is required on a fixed term contract basis for 12 - 18 months in an advisory and operational capacity to support various projects of work for a highly established organisation within the industry. The successful candidate with be responsible for product design, electrical/mechanical engineering, hardware delivery and functionality within the rail industry. Role Responsibilities Managing third party suppliers to develop future prototype units Reviewing internal technical documentation Successfully managing challenging stakeholders Deliver to, at times challenging, tight programme deadlines Create technical specifications/documentation as directed by the programme Liaise with project and programme delivery teams, building strong relationships and ensuring effective collaboration Provide layman's terms answers to highly technical questions raised by stakeholders both internal and external to ensure complex language is translated into easily digestible information Qualification as an Electrical or Mechanical Engineer is essential Experience in the rail industry either directly or via an agency/consultancy is highly desirable To apply for this vacancy please apply though the website or get in touch at (see below)
16/04/2025
Mechanical Engineer/Electrical Engineer - Rail - 12-18 months FTC A qualified Mechanical or Electrical Engineer is required on a fixed term contract basis for 12 - 18 months in an advisory and operational capacity to support various projects of work for a highly established organisation within the industry. The successful candidate with be responsible for product design, electrical/mechanical engineering, hardware delivery and functionality within the rail industry. Role Responsibilities Managing third party suppliers to develop future prototype units Reviewing internal technical documentation Successfully managing challenging stakeholders Deliver to, at times challenging, tight programme deadlines Create technical specifications/documentation as directed by the programme Liaise with project and programme delivery teams, building strong relationships and ensuring effective collaboration Provide layman's terms answers to highly technical questions raised by stakeholders both internal and external to ensure complex language is translated into easily digestible information Qualification as an Electrical or Mechanical Engineer is essential Experience in the rail industry either directly or via an agency/consultancy is highly desirable To apply for this vacancy please apply though the website or get in touch at (see below)
Job Title: Electrical Inspector Location: Islington Salary/Rate: £45 per hour - Inside IR35 Start Date: 28.04.25 Job Type: Contract Company Introduction We have an exciting opportunity now available with one of our sector-leading Public Sector clients! They are currently looking for a skilled Electrical Inspector to join their team for a six-month contract. As the electrical inspector you will be joining a robust and professional team of electrical engineers working in the residential social housing sector responsible for cyclical replacement of electrical services to a building stock of approx. 2,500 residential block buildings to over 35,000 dwellings and homes - including over 200 high rise buildings. You will join a team of highly skilled Building Services professionals. You must be computer literate and have experience in producing technical reports that can be shared with the wider team. You must have experience working in electrical contracting or consultancy demonstrating skill and knowledge relevant to the electrical social housing sector. Selection by interview and test. Minimum Requirements Essential City & Guilds (Level 3) or equivalent IEE Wiring Regulations 18th Edition Previous working experience or in a similar role Sound knowledge of Electrical Installations (Domestic and Residential Buildings (Communal) UK recognised qualifications Essential Skills Proficient in written & verbal communication Proficient in MS Office Packages (Word/Outlook/Excel) Knowledge of Microsoft Teams Typical Tasks within role Surveys of Low/High rise buildings Report writing, Condition Reports/Feasibility Reports Inspections - recording progress of Electrical Works on site highlighting issues of Electrical Services ie specification, regulatory, health & safety or engineering preference recording journey for project Liaising with Project Manager and/or Project Engineer and attending Project Progress Meetings Customer Care - liaising with residents and sometimes working out of hours (Time given back in Lieu) Working with colleagues and Stakeholders ie Project Managers, Quantity Surveys and Main Contractors Quality & Standards - Snagging with the Main Contractor and recording for file and record Handover - Soft landings process to Repairs & Maintenance If you are interested in this opportunity, please apply now with your updated CV in Microsoft Word/PDF format. Disclaimer Notwithstanding any guidelines given to level of experience sought, we will consider candidates from outside this range if they can demonstrate the necessary competencies. Square One is acting as both an employment agency and an employment business, and is an equal opportunities recruitment business. Square One embraces diversity and will treat everyone equally. Please see our website for our full diversity statement.
16/04/2025
Project-based
Job Title: Electrical Inspector Location: Islington Salary/Rate: £45 per hour - Inside IR35 Start Date: 28.04.25 Job Type: Contract Company Introduction We have an exciting opportunity now available with one of our sector-leading Public Sector clients! They are currently looking for a skilled Electrical Inspector to join their team for a six-month contract. As the electrical inspector you will be joining a robust and professional team of electrical engineers working in the residential social housing sector responsible for cyclical replacement of electrical services to a building stock of approx. 2,500 residential block buildings to over 35,000 dwellings and homes - including over 200 high rise buildings. You will join a team of highly skilled Building Services professionals. You must be computer literate and have experience in producing technical reports that can be shared with the wider team. You must have experience working in electrical contracting or consultancy demonstrating skill and knowledge relevant to the electrical social housing sector. Selection by interview and test. Minimum Requirements Essential City & Guilds (Level 3) or equivalent IEE Wiring Regulations 18th Edition Previous working experience or in a similar role Sound knowledge of Electrical Installations (Domestic and Residential Buildings (Communal) UK recognised qualifications Essential Skills Proficient in written & verbal communication Proficient in MS Office Packages (Word/Outlook/Excel) Knowledge of Microsoft Teams Typical Tasks within role Surveys of Low/High rise buildings Report writing, Condition Reports/Feasibility Reports Inspections - recording progress of Electrical Works on site highlighting issues of Electrical Services ie specification, regulatory, health & safety or engineering preference recording journey for project Liaising with Project Manager and/or Project Engineer and attending Project Progress Meetings Customer Care - liaising with residents and sometimes working out of hours (Time given back in Lieu) Working with colleagues and Stakeholders ie Project Managers, Quantity Surveys and Main Contractors Quality & Standards - Snagging with the Main Contractor and recording for file and record Handover - Soft landings process to Repairs & Maintenance If you are interested in this opportunity, please apply now with your updated CV in Microsoft Word/PDF format. Disclaimer Notwithstanding any guidelines given to level of experience sought, we will consider candidates from outside this range if they can demonstrate the necessary competencies. Square One is acting as both an employment agency and an employment business, and is an equal opportunities recruitment business. Square One embraces diversity and will treat everyone equally. Please see our website for our full diversity statement.
We are currently looking on behalf of one of our important clients for a MEMS Process Engineer (German Speaking). The role is permanent position based in Zurich Canton & comes with some home office allowance. Your role: Hold technical responsibility for MEMS Processing. Act as a central interface within MEMS Operations & all related areas. Consistently develop & optimize production. Drive CIP improvements, yield optimization & throughput increases. Collaboration with stakeholders from various areas, especially R&D. Your Skills & Experience: At least 3 years of relevant professional experience including experience in the areas of MEMS Process Engineering/MEMS Process Integration. Skilled in Production Topics, Manufacturing & Business Processes (MES, ERP, Databases). Experience in the Semiconductor Industry. Well accustomed to Production Environments. Your Profile: Completed University Degree in the areas of Microsystems Technology, Physics, Electrical Engineering or Materials Science. Highly self-motivated, strong communication skills & a team-player. Fluent in English (spoken & written) & a very good command of German (to at least B2 level) are mandatory requirements.
16/04/2025
Full time
We are currently looking on behalf of one of our important clients for a MEMS Process Engineer (German Speaking). The role is permanent position based in Zurich Canton & comes with some home office allowance. Your role: Hold technical responsibility for MEMS Processing. Act as a central interface within MEMS Operations & all related areas. Consistently develop & optimize production. Drive CIP improvements, yield optimization & throughput increases. Collaboration with stakeholders from various areas, especially R&D. Your Skills & Experience: At least 3 years of relevant professional experience including experience in the areas of MEMS Process Engineering/MEMS Process Integration. Skilled in Production Topics, Manufacturing & Business Processes (MES, ERP, Databases). Experience in the Semiconductor Industry. Well accustomed to Production Environments. Your Profile: Completed University Degree in the areas of Microsystems Technology, Physics, Electrical Engineering or Materials Science. Highly self-motivated, strong communication skills & a team-player. Fluent in English (spoken & written) & a very good command of German (to at least B2 level) are mandatory requirements.
Electrical Design Engineer | 6 months (enough work for the next 2 years minimum) | 3 days in office 2 WFH Electrical Design Engineer required for LV power & lighting designs on a major telecoms project delivering 4G & 5G infrastructure to the London Underground. Will be responsible for producing high quality design packs consisting of but not limited to drawings, calculations, schedules, and specifications. Proficiency with AutoCAD 2D, Trimble ProDesign (Amtech), Dialux, and MS Office required. Good communication skills, willing to take on responsibility, willing to liaise with external parties, willing to fully integrate into the team. Strong knowledge of British design standards. Experience on TfL (specifically London Underground) projects and knowledge of TfL Cat 1 standards is a must. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
16/04/2025
Project-based
Electrical Design Engineer | 6 months (enough work for the next 2 years minimum) | 3 days in office 2 WFH Electrical Design Engineer required for LV power & lighting designs on a major telecoms project delivering 4G & 5G infrastructure to the London Underground. Will be responsible for producing high quality design packs consisting of but not limited to drawings, calculations, schedules, and specifications. Proficiency with AutoCAD 2D, Trimble ProDesign (Amtech), Dialux, and MS Office required. Good communication skills, willing to take on responsibility, willing to liaise with external parties, willing to fully integrate into the team. Strong knowledge of British design standards. Experience on TfL (specifically London Underground) projects and knowledge of TfL Cat 1 standards is a must. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
Electrical Design Engineer | 6 months (enough work for the next 2 years minimum) | 3 days in office 2 WFH Electrical Design Engineer required for LV power & lighting designs on a major telecoms project delivering 4G & 5G infrastructure to the London Underground. Will be responsible for producing high quality design packs consisting of but not limited to drawings, calculations, schedules, and specifications. Proficiency with AutoCAD 2D, Trimble ProDesign (Amtech), Dialux, and MS Office required. Good communication skills, willing to take on responsibility, willing to liaise with external parties, willing to fully integrate into the team. Strong knowledge of British design standards. Experience on TfL (specifically London Underground) projects and knowledge of TfL Cat 1 standards is a must. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
16/04/2025
Project-based
Electrical Design Engineer | 6 months (enough work for the next 2 years minimum) | 3 days in office 2 WFH Electrical Design Engineer required for LV power & lighting designs on a major telecoms project delivering 4G & 5G infrastructure to the London Underground. Will be responsible for producing high quality design packs consisting of but not limited to drawings, calculations, schedules, and specifications. Proficiency with AutoCAD 2D, Trimble ProDesign (Amtech), Dialux, and MS Office required. Good communication skills, willing to take on responsibility, willing to liaise with external parties, willing to fully integrate into the team. Strong knowledge of British design standards. Experience on TfL (specifically London Underground) projects and knowledge of TfL Cat 1 standards is a must. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
MERITUS are recruiting for a Electronics Engineers to join our client within the national security industry on an initial 12 month contract from their major site in Bolton. The business have been frequently named as one of the best places to work over the last decade and are currently expanding at an incredibly exciting speed! ELECTRONICS ENGINEER - CALIBRATION & MAINTENANCE EXPERIENCE - INSIDE IR35 - £35 PER HOUR - UNDERGO SC CLEARANCE - BOLTON - 12 MONTHS - SINGLE STAGE INTERVIEW PROCESS We are working in partnership with a leading defence organisation who are seeking a talented Electronics Engineer to join their Calibration & Maintenance Team . This is a fantastic opportunity for an engineer with strong fault-finding skills and calibration experience to work on advanced and bespoke test systems used in the production of next-generation missile systems. This role offers the chance to work within a well-established and supportive engineering team, with opportunities for continued training and development - including calibration support for Special to Type Test Equipment (STTE) spanning technologies from DC to Microwave . Key Responsibilities: Service, fault-find, and repair electrical/electronic test equipment, including STTE. Support regular calibration schedules and commissioning of new test equipment. Conduct drift analysis and ensure optimal test system performance. Use technical documentation (manuals, specs, drawings) to perform component-level diagnostics and repairs. Collaborate closely with the production and test teams to maintain system reliability. Ideal Candidate Will Have: A minimum HNC/HND in Electrical & Electronic Engineering. Proven experience calibrating and maintaining test systems down to component level. A strong understanding of calibration principles and electronic fault-finding . Confidence in interpreting engineering documentation to provide technical solutions. Good problem-solving ability and capable of managing multiple tasks/priorities. Experience using SAP (desirable). Familiarity with environmental chambers (an advantage). Strong communication skills and the ability to mentor junior staff if required
16/04/2025
Project-based
MERITUS are recruiting for a Electronics Engineers to join our client within the national security industry on an initial 12 month contract from their major site in Bolton. The business have been frequently named as one of the best places to work over the last decade and are currently expanding at an incredibly exciting speed! ELECTRONICS ENGINEER - CALIBRATION & MAINTENANCE EXPERIENCE - INSIDE IR35 - £35 PER HOUR - UNDERGO SC CLEARANCE - BOLTON - 12 MONTHS - SINGLE STAGE INTERVIEW PROCESS We are working in partnership with a leading defence organisation who are seeking a talented Electronics Engineer to join their Calibration & Maintenance Team . This is a fantastic opportunity for an engineer with strong fault-finding skills and calibration experience to work on advanced and bespoke test systems used in the production of next-generation missile systems. This role offers the chance to work within a well-established and supportive engineering team, with opportunities for continued training and development - including calibration support for Special to Type Test Equipment (STTE) spanning technologies from DC to Microwave . Key Responsibilities: Service, fault-find, and repair electrical/electronic test equipment, including STTE. Support regular calibration schedules and commissioning of new test equipment. Conduct drift analysis and ensure optimal test system performance. Use technical documentation (manuals, specs, drawings) to perform component-level diagnostics and repairs. Collaborate closely with the production and test teams to maintain system reliability. Ideal Candidate Will Have: A minimum HNC/HND in Electrical & Electronic Engineering. Proven experience calibrating and maintaining test systems down to component level. A strong understanding of calibration principles and electronic fault-finding . Confidence in interpreting engineering documentation to provide technical solutions. Good problem-solving ability and capable of managing multiple tasks/priorities. Experience using SAP (desirable). Familiarity with environmental chambers (an advantage). Strong communication skills and the ability to mentor junior staff if required