A Test Architect with Electronic Engineering experience is required for a long term contract assignment based out of Stevenage (some hybrid working after initial settling in period) Overview of department: Looking for experienced test equipment engineers that want to use their knowledge in a system/sub system management role. The role includes determining the project test equipment needs, managing the requirements for test equipment and managing the development through delivery and into service. In this role, you will be responsible for the projects test equipment and reporting into the Chief Design Engineer The department is responsible for the test architecture of our missiles, specifying and analysing the missile built in test, specifying the production testing requirements and managing the specification and delivery of the missile test equipment. Responsibilities: * Responsible for defining and implementing the project test strategy * Responsible for defining and implementing the project BIT architecture including coverage requirements, BIT timings and system level BIT routines. * Responsible for specifying the missile factory pass out testing used to ensure correct build of our product, supporting the manufacturing team with identifying the optimal test stages during production. * Responsible for specifying the in service test routines on our missiles. * Responsible for generating and managing compliance to the lower level test requirements placed upon design teams including test access needs, BIT coverage/timings and factory test functionality. * Responsible for analysing and modelling our system to understand the test coverage and generate diagnostic instructions. * Responsible for proposing and recommending, with the Chief Design Engineer, the cost vs test coverage trade-offs. * Responsible for producing and maintaining plans for activities within their sphere of responsibility. Skillset/experience required: Ideally educated to degree level with substantial experience of test, electrical or electronic engineering, ideally including at least one of the following: * Digital electronics and Microprocessor systems. * Analogue electronics. * Electronics testing. * Test equipment design. Good understanding of: * Experience in requirements capture. * Project management and planning. * Stakeholder management. Other Attributes * Ability to influence stakeholders across the company. * Determination and desire to succeed. * Strong interpersonal and well developed communication skills (written & verbal). * Willingness to travel when required. Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
17/10/2024
Project-based
A Test Architect with Electronic Engineering experience is required for a long term contract assignment based out of Stevenage (some hybrid working after initial settling in period) Overview of department: Looking for experienced test equipment engineers that want to use their knowledge in a system/sub system management role. The role includes determining the project test equipment needs, managing the requirements for test equipment and managing the development through delivery and into service. In this role, you will be responsible for the projects test equipment and reporting into the Chief Design Engineer The department is responsible for the test architecture of our missiles, specifying and analysing the missile built in test, specifying the production testing requirements and managing the specification and delivery of the missile test equipment. Responsibilities: * Responsible for defining and implementing the project test strategy * Responsible for defining and implementing the project BIT architecture including coverage requirements, BIT timings and system level BIT routines. * Responsible for specifying the missile factory pass out testing used to ensure correct build of our product, supporting the manufacturing team with identifying the optimal test stages during production. * Responsible for specifying the in service test routines on our missiles. * Responsible for generating and managing compliance to the lower level test requirements placed upon design teams including test access needs, BIT coverage/timings and factory test functionality. * Responsible for analysing and modelling our system to understand the test coverage and generate diagnostic instructions. * Responsible for proposing and recommending, with the Chief Design Engineer, the cost vs test coverage trade-offs. * Responsible for producing and maintaining plans for activities within their sphere of responsibility. Skillset/experience required: Ideally educated to degree level with substantial experience of test, electrical or electronic engineering, ideally including at least one of the following: * Digital electronics and Microprocessor systems. * Analogue electronics. * Electronics testing. * Test equipment design. Good understanding of: * Experience in requirements capture. * Project management and planning. * Stakeholder management. Other Attributes * Ability to influence stakeholders across the company. * Determination and desire to succeed. * Strong interpersonal and well developed communication skills (written & verbal). * Willingness to travel when required. Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
An Electrical/Electronic Architect is required for a long term contract assignment based in Stevenage. Some hybrid work possible. Overview of department: Missile Architecture - Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support within the company. It's an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: a) Specifying/determining * system electrical requirements * interface definitions and characteristics between subsystems/equipment * power architecture, including power budget and power profiles * data communication and processing architecture * requirements for EMC, bonding, grounding and screening * signal safety, including routing of safety related signals b) Supporting test and fault-finding activities during compatibility checks, risk reduction, system proving/qualification and integration c) Reviewing and authoring reports, guidelines and processes d) Design assessments and analysis e) Working to defence/industry standards f) Attending and supporting design reviews Alternatively, acting as the Equipment Manager (RMO) for specific electrical/electronic equipment(s) that are part of a missile or launcher system you will: a) Project manage the equipment(s) on behalf of the project during development, qualification and manufacture b) Own the requirements on behalf of the project for the equipment(s) c) Produce Statement(s) of Work for the associated design authority for the equipment(s) d) Create and update plans showing activities for the equipment(s) e) Manage internal & external design authorities for delivery of the equipment(s) hardware, software and deliverables to schedule, cost, quality and performance f) Hold regular progress reviews with the design authority for the equipment(s) g) Review qualification verification evidence h) Track and find resolution to equipment non-compliances i) Attend and support design reviews Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
17/10/2024
Project-based
An Electrical/Electronic Architect is required for a long term contract assignment based in Stevenage. Some hybrid work possible. Overview of department: Missile Architecture - Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support within the company. It's an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: a) Specifying/determining * system electrical requirements * interface definitions and characteristics between subsystems/equipment * power architecture, including power budget and power profiles * data communication and processing architecture * requirements for EMC, bonding, grounding and screening * signal safety, including routing of safety related signals b) Supporting test and fault-finding activities during compatibility checks, risk reduction, system proving/qualification and integration c) Reviewing and authoring reports, guidelines and processes d) Design assessments and analysis e) Working to defence/industry standards f) Attending and supporting design reviews Alternatively, acting as the Equipment Manager (RMO) for specific electrical/electronic equipment(s) that are part of a missile or launcher system you will: a) Project manage the equipment(s) on behalf of the project during development, qualification and manufacture b) Own the requirements on behalf of the project for the equipment(s) c) Produce Statement(s) of Work for the associated design authority for the equipment(s) d) Create and update plans showing activities for the equipment(s) e) Manage internal & external design authorities for delivery of the equipment(s) hardware, software and deliverables to schedule, cost, quality and performance f) Hold regular progress reviews with the design authority for the equipment(s) g) Review qualification verification evidence h) Track and find resolution to equipment non-compliances i) Attend and support design reviews Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
Principal Electrical Design Engineer (Defence) - Contract (Ongoing) £65- 75 per hour (DOE) - Inside IR35 Glasgow - Hybrid Our client are an international engineering consultancy with some excellent opportunities in the Defence industry for a Principal Electrical Engineer on a contract basis. The Principal Electrical Design Engineer will work as part of a multi-disciplinary engineering team within, supporting operations and future programs at client sites. Responsibilities Manage Infrastructure Design Substantiation documents. Handle design changes/concessions. Present Design substantiations to safety committees. Develop EIMT Schedule, procedures, and results. Produce Periodic Review of Safety reports. Advise internal and external stakeholders. Conduct Independent Technical Review. Apply engineering knowledge to nuclear/high-risk environments. Justify civil/structural design modifications. Review reports and safety submissions. Check and review calculations and technical documents. Key Experience/Qualifications Knowledge of current design standards and practices, including British & European Standards. Theoretical and practical skills across concept, detailed design, and construction stages for electrical engineering projects. Experience in assessing electrical plant and equipment for hazards. Specifying electrical systems/components for HV & LV networks at 50Hz & 60Hz. Authoring technical justifications for electrical design modifications in high hazard industries. Familiarity with industrial machinery like pumps, generators, HVAC, SCADA, PAVA Systems, etc. Experience in multi-discipline projects providing electrical engineering input, especially in industrial/maritime sectors. Experienced in high-risk environments. Familiarity with safety case development techniques like HAZID/HAZOP studies. Worked in the UK nuclear industry (energy or defense), especially in safety-related structures, systems, and components. Knowledge of UK and US nuclear industry regulations, and application of nuclear-specific codes and standards. This role will require security clearance, which the client are happy to provide. If you do not hold existing UK security clearance, please ensure you meet the criteria before applying. This is an excellent opportunity to join a dynamic a thriving company on a long term contract basis. Please call Ryan on / or apply without delay to be considered.
17/10/2024
Project-based
Principal Electrical Design Engineer (Defence) - Contract (Ongoing) £65- 75 per hour (DOE) - Inside IR35 Glasgow - Hybrid Our client are an international engineering consultancy with some excellent opportunities in the Defence industry for a Principal Electrical Engineer on a contract basis. The Principal Electrical Design Engineer will work as part of a multi-disciplinary engineering team within, supporting operations and future programs at client sites. Responsibilities Manage Infrastructure Design Substantiation documents. Handle design changes/concessions. Present Design substantiations to safety committees. Develop EIMT Schedule, procedures, and results. Produce Periodic Review of Safety reports. Advise internal and external stakeholders. Conduct Independent Technical Review. Apply engineering knowledge to nuclear/high-risk environments. Justify civil/structural design modifications. Review reports and safety submissions. Check and review calculations and technical documents. Key Experience/Qualifications Knowledge of current design standards and practices, including British & European Standards. Theoretical and practical skills across concept, detailed design, and construction stages for electrical engineering projects. Experience in assessing electrical plant and equipment for hazards. Specifying electrical systems/components for HV & LV networks at 50Hz & 60Hz. Authoring technical justifications for electrical design modifications in high hazard industries. Familiarity with industrial machinery like pumps, generators, HVAC, SCADA, PAVA Systems, etc. Experience in multi-discipline projects providing electrical engineering input, especially in industrial/maritime sectors. Experienced in high-risk environments. Familiarity with safety case development techniques like HAZID/HAZOP studies. Worked in the UK nuclear industry (energy or defense), especially in safety-related structures, systems, and components. Knowledge of UK and US nuclear industry regulations, and application of nuclear-specific codes and standards. This role will require security clearance, which the client are happy to provide. If you do not hold existing UK security clearance, please ensure you meet the criteria before applying. This is an excellent opportunity to join a dynamic a thriving company on a long term contract basis. Please call Ryan on / or apply without delay to be considered.
Senior Electrical Design Engineer (Defence) - Contract (Ongoing) £55 - 65 per hour (DOE) - Inside IR35 Helensburgh - Hybrid Our client are an international engineering consultancy with some excellent opportunities in the Defence industry for a Senior Electrical Engineer on a contract basis. The Senior Electrical Design Engineer will work as part of a multi-disciplinary engineering team within, supporting operations and future programs at client sites. Responsibilities Author, develop, assess, and manage Infrastructure Design Substantiation documents. Manage design changes/concessions and present design substantiations to safety committees. Develop Examination, Inspection, Maintenance & Testing schedules and safety reports. Provide guidance to internal and external stakeholders and conduct Independent Technical Reviews. Apply engineering knowledge to design, develop, and maintain engineering processes and systems. Key Experience/Qualifications Essentials Knowledge of design standards and practices. Theoretical and practical skills in design stages. Experience in assessing electrical equipment. Specification skills for HV and LV networks. Ability to justify design modifications. Familiarity with industrial machinery. Experience in multi-discipline projects. Desirables Experience in high-risk environments. Familiarity with safety case development. Knowledge of nuclear industry regulations. Relevant degree or equivalent. Chartered Engineer status. Safety case related training. This role will require security clearance, which the client are happy to provide. If you do not hold existing UK security clearance, please ensure you meet the criteria before applying. This is an excellent opportunity to join a dynamic a thriving company on a long term contract basis. Please call Ryan on / or apply without delay to be considered.
17/10/2024
Project-based
Senior Electrical Design Engineer (Defence) - Contract (Ongoing) £55 - 65 per hour (DOE) - Inside IR35 Helensburgh - Hybrid Our client are an international engineering consultancy with some excellent opportunities in the Defence industry for a Senior Electrical Engineer on a contract basis. The Senior Electrical Design Engineer will work as part of a multi-disciplinary engineering team within, supporting operations and future programs at client sites. Responsibilities Author, develop, assess, and manage Infrastructure Design Substantiation documents. Manage design changes/concessions and present design substantiations to safety committees. Develop Examination, Inspection, Maintenance & Testing schedules and safety reports. Provide guidance to internal and external stakeholders and conduct Independent Technical Reviews. Apply engineering knowledge to design, develop, and maintain engineering processes and systems. Key Experience/Qualifications Essentials Knowledge of design standards and practices. Theoretical and practical skills in design stages. Experience in assessing electrical equipment. Specification skills for HV and LV networks. Ability to justify design modifications. Familiarity with industrial machinery. Experience in multi-discipline projects. Desirables Experience in high-risk environments. Familiarity with safety case development. Knowledge of nuclear industry regulations. Relevant degree or equivalent. Chartered Engineer status. Safety case related training. This role will require security clearance, which the client are happy to provide. If you do not hold existing UK security clearance, please ensure you meet the criteria before applying. This is an excellent opportunity to join a dynamic a thriving company on a long term contract basis. Please call Ryan on / or apply without delay to be considered.
Electrician Our client has a fantastic opportunity for a skilled electrician who has worked extensively with steel containment to join our rapidly growing business and team of engineers installing automatic fire suppression systems . This opportunity is reserved for electricians with experience in forming and installing steel conduit and have significant experience working on industrial sites. This is a full-time, permanent role that will involve travel and staying away in the UK approx. 2 nights per week (all expenses covered when staying away.) Salary and Benefits Starting salary £30,000 - £40,000 dependent on experience plus overtime and travel time (approx. £7k per year) along with paid annual leave, pension, and company van (after probation is passed). Essential Skills: Must have the ability to understand and install from design drawings JIB Approved Electrician Minimum of 5 years' experience working on Industrial/Commercial installations. Good Time Management skills and the proficiency to work to strict deadlines. High level of Self-motivation since some jobs will only require a single operative. Good writing/language skills - be able to complete all required documentation in a neat and coherent manner. Adaptable and willing to learn new skills. Complete works to high standard following applicable British Standards. Full UK Driving licence. Ability to take initiative. Computer literate and experience on Windows. Good communicator, both with our clients and within the team. Nice To Have Skills: Knowledge of British Standards relating to Fire Systems. Any additional industrial related electrical qualifications. Experience working with Microsoft, Android tablets and phones. Experience with Pumps & Motors
16/10/2024
Full time
Electrician Our client has a fantastic opportunity for a skilled electrician who has worked extensively with steel containment to join our rapidly growing business and team of engineers installing automatic fire suppression systems . This opportunity is reserved for electricians with experience in forming and installing steel conduit and have significant experience working on industrial sites. This is a full-time, permanent role that will involve travel and staying away in the UK approx. 2 nights per week (all expenses covered when staying away.) Salary and Benefits Starting salary £30,000 - £40,000 dependent on experience plus overtime and travel time (approx. £7k per year) along with paid annual leave, pension, and company van (after probation is passed). Essential Skills: Must have the ability to understand and install from design drawings JIB Approved Electrician Minimum of 5 years' experience working on Industrial/Commercial installations. Good Time Management skills and the proficiency to work to strict deadlines. High level of Self-motivation since some jobs will only require a single operative. Good writing/language skills - be able to complete all required documentation in a neat and coherent manner. Adaptable and willing to learn new skills. Complete works to high standard following applicable British Standards. Full UK Driving licence. Ability to take initiative. Computer literate and experience on Windows. Good communicator, both with our clients and within the team. Nice To Have Skills: Knowledge of British Standards relating to Fire Systems. Any additional industrial related electrical qualifications. Experience working with Microsoft, Android tablets and phones. Experience with Pumps & Motors
Job Title: Design Engineer Salary: £40,000 Job Type: Permanent The Opportunity: We are seeking a talented Design Engineer to join a growing team within a leading power systems company. This is an exciting opportunity to work on high-quality design and engineering projects for a diverse, blue chip client base. The Role: As an Design Engineer, you will be responsible for designing mechanical systems for LV switchgear and critical power solutions. You'll work within an in-house design team, managing projects from initial concept to manufacturing, ensuring that the products meet client-specific requirements. Key responsibilities include: Designing sheet steel enclosures and component layouts for bespoke switchgear solutions. Conducting site surveys to support detailed project designs. Collaborating with clients and internal teams (sales, production) to ensure specifications are met and changes are incorporated as needed. Delivering high-quality designs in a timely manner, with a focus on customer satisfaction. Required Skills and Experience: Technical knowledge of electrical/mechanical equipment. Proficiency in CAD for sheet metal design. Experience using Autodesk software (Inventor experience preferred). Desirable Skills: Experience in low voltage switchgear design. Relevant electrical/engineering qualifications. Familiarity with 3D modelling, ideally using Autodesk Inventor. About You: You're a proactive and detail-oriented engineer with a strong technical background in design. You'll thrive in a fast-paced environment, balancing multiple priorities while ensuring that both internal and external stakeholders are satisfied with your work.
16/10/2024
Full time
Job Title: Design Engineer Salary: £40,000 Job Type: Permanent The Opportunity: We are seeking a talented Design Engineer to join a growing team within a leading power systems company. This is an exciting opportunity to work on high-quality design and engineering projects for a diverse, blue chip client base. The Role: As an Design Engineer, you will be responsible for designing mechanical systems for LV switchgear and critical power solutions. You'll work within an in-house design team, managing projects from initial concept to manufacturing, ensuring that the products meet client-specific requirements. Key responsibilities include: Designing sheet steel enclosures and component layouts for bespoke switchgear solutions. Conducting site surveys to support detailed project designs. Collaborating with clients and internal teams (sales, production) to ensure specifications are met and changes are incorporated as needed. Delivering high-quality designs in a timely manner, with a focus on customer satisfaction. Required Skills and Experience: Technical knowledge of electrical/mechanical equipment. Proficiency in CAD for sheet metal design. Experience using Autodesk software (Inventor experience preferred). Desirable Skills: Experience in low voltage switchgear design. Relevant electrical/engineering qualifications. Familiarity with 3D modelling, ideally using Autodesk Inventor. About You: You're a proactive and detail-oriented engineer with a strong technical background in design. You'll thrive in a fast-paced environment, balancing multiple priorities while ensuring that both internal and external stakeholders are satisfied with your work.
Computer Futures - London & S.E(Permanent and Contract)
Wokingham, Berkshire
Our client is an esteemed engineering firm based in Berkshire, are looking to hire a Senior Electrical Design Engineer with mission critical project experience. The ideal candidate should have at least 5 years of relevant working experience and be adept at designing HV, MV, and major LV power distribution systems. The successful candidate will be required to design complex electrical systems that are reliable, efficient and meet all safety standards while adhering strictly to the client's needs. They must also ensure proper integration into building management or automation control system as per customer specifications. The engineer shall provide technical support during installation activities including testing commissioning & maintenance services whilst ensuring compliance with applicable regulations, national codes & industry best practices. Skills: - Electrical systems designs (Minimum 5 years) - Design of HV, MV and Major LV Power Distribution Systems - Mission critical project experience, preferably Data Centres - Project leadership Experience within data centers/mission-critical projects would prove invaluable. Exposure to EHV, HV, MV to Low Voltage incorporating high voltage equipment, generation equipment, UPS plant, low voltage switchgear and power control and monitoring systems is key, as this job requires someone to can hit the ground running without extensive training on modern techniques used by their team but still offer innovative solutions where necessary. This role offers a competitive salary of £60,000 to £70,000 along with other benefits such as hybrid working. If you believe you fit these requirements please apply with your latest CV! To find out more about Computer Futures please visit our website Computer Futures, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy | Registered office | 8 Bishopsgate, London, EC2N 4BQ, United Kingdom | Partnership Number | OC387148 England and Wales
16/10/2024
Full time
Our client is an esteemed engineering firm based in Berkshire, are looking to hire a Senior Electrical Design Engineer with mission critical project experience. The ideal candidate should have at least 5 years of relevant working experience and be adept at designing HV, MV, and major LV power distribution systems. The successful candidate will be required to design complex electrical systems that are reliable, efficient and meet all safety standards while adhering strictly to the client's needs. They must also ensure proper integration into building management or automation control system as per customer specifications. The engineer shall provide technical support during installation activities including testing commissioning & maintenance services whilst ensuring compliance with applicable regulations, national codes & industry best practices. Skills: - Electrical systems designs (Minimum 5 years) - Design of HV, MV and Major LV Power Distribution Systems - Mission critical project experience, preferably Data Centres - Project leadership Experience within data centers/mission-critical projects would prove invaluable. Exposure to EHV, HV, MV to Low Voltage incorporating high voltage equipment, generation equipment, UPS plant, low voltage switchgear and power control and monitoring systems is key, as this job requires someone to can hit the ground running without extensive training on modern techniques used by their team but still offer innovative solutions where necessary. This role offers a competitive salary of £60,000 to £70,000 along with other benefits such as hybrid working. If you believe you fit these requirements please apply with your latest CV! To find out more about Computer Futures please visit our website Computer Futures, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy | Registered office | 8 Bishopsgate, London, EC2N 4BQ, United Kingdom | Partnership Number | OC387148 England and Wales
Senior Software Engineer (C++) C++ development experience requirements: Proficient Modern C++ experience (minimum 11, ideally 14 and later). Experience in developing multi-threaded applications. Experience of debugging on target hardware. Experience in platform development and a good understanding of Linux. Job Description: Design, develop and test software programs. Analyse and contribute to system and subsystem requirements specifications and design definitions. Complete high- and low-level detailed software design specifications, storyboards and interface specifications. Provide support of products from conception through to product delivery including problem solving and defect maintenance. Prepare reports, manuals, procedures and status reports. Provide training and guidance to other team members. Education and Qualifications: Bachelor of Science degree in computer science, electrical engineering, or related field or equivalent professional experience or combination of both. Skills, Knowledge and Experience: Experience in Software Engineering with a proven track record of specification, design and development. Demonstrable experience of defining test plans and test data requirements. An effective problem solver with the ability to understand and resolve complex issues. Experience in troubleshooting and debugging applications. Experience of Object-Oriented Design and implementation, along with Software Design patterns. Ability to contribute to the development of the architecture for applications. Experience of maintaining and improving coding standards. Experience of software best practices such as Automated Testing (Google Test), Continuous Integration, Test Driven Development, SOLID and Clean Code principles. Scrum or Kanban experience in Agile teams. GIT, Jenkins, Bitbucket (or similar) and Conan experience. Experience using DOORS, Test Rail and Jira. Experience working with test teams to optimise application performance.
15/10/2024
Project-based
Senior Software Engineer (C++) C++ development experience requirements: Proficient Modern C++ experience (minimum 11, ideally 14 and later). Experience in developing multi-threaded applications. Experience of debugging on target hardware. Experience in platform development and a good understanding of Linux. Job Description: Design, develop and test software programs. Analyse and contribute to system and subsystem requirements specifications and design definitions. Complete high- and low-level detailed software design specifications, storyboards and interface specifications. Provide support of products from conception through to product delivery including problem solving and defect maintenance. Prepare reports, manuals, procedures and status reports. Provide training and guidance to other team members. Education and Qualifications: Bachelor of Science degree in computer science, electrical engineering, or related field or equivalent professional experience or combination of both. Skills, Knowledge and Experience: Experience in Software Engineering with a proven track record of specification, design and development. Demonstrable experience of defining test plans and test data requirements. An effective problem solver with the ability to understand and resolve complex issues. Experience in troubleshooting and debugging applications. Experience of Object-Oriented Design and implementation, along with Software Design patterns. Ability to contribute to the development of the architecture for applications. Experience of maintaining and improving coding standards. Experience of software best practices such as Automated Testing (Google Test), Continuous Integration, Test Driven Development, SOLID and Clean Code principles. Scrum or Kanban experience in Agile teams. GIT, Jenkins, Bitbucket (or similar) and Conan experience. Experience using DOORS, Test Rail and Jira. Experience working with test teams to optimise application performance.
SECURITY CLEARED - SENIOR ELECTRICAL ENGINEER EC&I Up to £70 per hour. Plymouth - Remote (couple of times in a month in office) Join the global leading team where talent thrives and innovation flourishes in Defense, Nuclear, Marine, Civil and more. They are seeking a Security Cleared - Senior Electrical Engineer EC&I to support project delivery under the guidance of the Design Manager. This role would be responsible for managing technical deliverables for electrical services engineering packages according to agreed-upon plans set by the Electrical Services Engineering Lead. You will support Electrical Services Engineering Lead in delivering of the electrical services related engineering work. Skills Required: Active Security Clearance (SC). EC&I Electrical designing experience. Design of electrical building services. Create control & instrumentation systems. Design of control & instrumentation systems With a Legacy of impactful contributions, it remains a pivotal force in engineering and support services on an international scale. If you are looking for to be a part of such a pioneering company, then this role is for you. * PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role.
15/10/2024
Project-based
SECURITY CLEARED - SENIOR ELECTRICAL ENGINEER EC&I Up to £70 per hour. Plymouth - Remote (couple of times in a month in office) Join the global leading team where talent thrives and innovation flourishes in Defense, Nuclear, Marine, Civil and more. They are seeking a Security Cleared - Senior Electrical Engineer EC&I to support project delivery under the guidance of the Design Manager. This role would be responsible for managing technical deliverables for electrical services engineering packages according to agreed-upon plans set by the Electrical Services Engineering Lead. You will support Electrical Services Engineering Lead in delivering of the electrical services related engineering work. Skills Required: Active Security Clearance (SC). EC&I Electrical designing experience. Design of electrical building services. Create control & instrumentation systems. Design of control & instrumentation systems With a Legacy of impactful contributions, it remains a pivotal force in engineering and support services on an international scale. If you are looking for to be a part of such a pioneering company, then this role is for you. * PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role.
Job Title: Senior Electrical Design Engineer Location: New Hythe or New Milton Job Type: Permanent A leader in power, monitoring, and control systems with over 30 years of experience in the marine, vehicle, and off-grid sectors. Focused on sustainability, developing hybrid renewable energy systems for a resilient energy future. As part of our growth, we're looking for a Senior Electrical Design Engineer to join the marine division. The Role You will lead the design and development of complex hybrid systems, working with mechanical and control system engineers on large-scale land and marine projects. You'll also mentor junior engineers, driving improvements and technical excellence within the team. Key Responsibilities Design and develop hybrid systems, using Danfoss drive technology. Manage large projects across land and marine sectors. Collaborate with engineers to deliver advanced solutions. Occasionally travel within the UK and Europe for system troubleshooting and commissioning. Provide mentorship to junior engineers. Requirements Degree in Electrical Engineering (Master's or PhD is a plus). Strong experience in electrical design, hybrid systems, and marine/yachting systems. Proficient in E-Plan (AutoCAD is beneficial). Experience with control panels, switchgear, and battery systems (300-700V). Strong attention to detail and collaboration skills. Benefits Private healthcare. Career development and training opportunities. Inclusive and sustainable work environment. If this sounds like it matches your skill set, apply with your latest CV or call for more information. Note: Must be eligible to work in the UK.
15/10/2024
Full time
Job Title: Senior Electrical Design Engineer Location: New Hythe or New Milton Job Type: Permanent A leader in power, monitoring, and control systems with over 30 years of experience in the marine, vehicle, and off-grid sectors. Focused on sustainability, developing hybrid renewable energy systems for a resilient energy future. As part of our growth, we're looking for a Senior Electrical Design Engineer to join the marine division. The Role You will lead the design and development of complex hybrid systems, working with mechanical and control system engineers on large-scale land and marine projects. You'll also mentor junior engineers, driving improvements and technical excellence within the team. Key Responsibilities Design and develop hybrid systems, using Danfoss drive technology. Manage large projects across land and marine sectors. Collaborate with engineers to deliver advanced solutions. Occasionally travel within the UK and Europe for system troubleshooting and commissioning. Provide mentorship to junior engineers. Requirements Degree in Electrical Engineering (Master's or PhD is a plus). Strong experience in electrical design, hybrid systems, and marine/yachting systems. Proficient in E-Plan (AutoCAD is beneficial). Experience with control panels, switchgear, and battery systems (300-700V). Strong attention to detail and collaboration skills. Benefits Private healthcare. Career development and training opportunities. Inclusive and sustainable work environment. If this sounds like it matches your skill set, apply with your latest CV or call for more information. Note: Must be eligible to work in the UK.
Electrical Design Engineer - EPLAN, Electrical Schematics, Electrical Panel Layouts Salary negotiable Our new Electrical Design Engineer will design and develop electrical solutions for robot-based, electromechanical systems for use in factory and process automation. Working collaboratively across departments, the Company will rely on your electrical knowledge and expertise to design safe and effective solutions for our clients. You will ideally have used EPLAN electrical design software and have experience designing industrial control cabinets. Whilst you will be predominantly designing, you may be required to join our workshop team on occasion to get stuck in, fault-find, and identify solutions. Therefore, having previous experience of electrical building would be highly advantageous. You will need to be an effective communicator, able to build strong relationships with internal and external stakeholders, whilst also being able to provide technical detail in both written and verbal English. This will be particularly important when generating and managing technical documentation in line with the Company's product development process. The role will involve travel to client sites in the UK, within the defence and aerospace sectors. As a result, the successful candidate will need to be a UK citizen. About you Degree/HND/HNC in electrical engineering or equivalent qualifications and/or experience Previous experience within an electrical design role, or a role that has required a reasonable degree of electrical design Proficient in the creation of Electrical Schematics EPLAN Demonstrable ability to create 2D electrical panel layouts Able to manage your own time and prioritise tasks based on high-level project milestones and objectives Willing and interested in learning new technology Knowledge and ability to work to the required standards Proficient with MC Office applications (Word, Excel, PowerPoint) Natural problem-solving abilities Willing to get hands-on and stuck in if required. Must be able to drive in the UK.
15/10/2024
Full time
Electrical Design Engineer - EPLAN, Electrical Schematics, Electrical Panel Layouts Salary negotiable Our new Electrical Design Engineer will design and develop electrical solutions for robot-based, electromechanical systems for use in factory and process automation. Working collaboratively across departments, the Company will rely on your electrical knowledge and expertise to design safe and effective solutions for our clients. You will ideally have used EPLAN electrical design software and have experience designing industrial control cabinets. Whilst you will be predominantly designing, you may be required to join our workshop team on occasion to get stuck in, fault-find, and identify solutions. Therefore, having previous experience of electrical building would be highly advantageous. You will need to be an effective communicator, able to build strong relationships with internal and external stakeholders, whilst also being able to provide technical detail in both written and verbal English. This will be particularly important when generating and managing technical documentation in line with the Company's product development process. The role will involve travel to client sites in the UK, within the defence and aerospace sectors. As a result, the successful candidate will need to be a UK citizen. About you Degree/HND/HNC in electrical engineering or equivalent qualifications and/or experience Previous experience within an electrical design role, or a role that has required a reasonable degree of electrical design Proficient in the creation of Electrical Schematics EPLAN Demonstrable ability to create 2D electrical panel layouts Able to manage your own time and prioritise tasks based on high-level project milestones and objectives Willing and interested in learning new technology Knowledge and ability to work to the required standards Proficient with MC Office applications (Word, Excel, PowerPoint) Natural problem-solving abilities Willing to get hands-on and stuck in if required. Must be able to drive in the UK.
Job Title: Experienced Electronic Design Engineer Location: Reading, UK Salary: £45,000 - £60,000 Dependent on skills Key Responsibilities: PCB Design: Expert in Altium design software for creating and modifying PCB layouts. AC Voltage: Experience working with AC level voltages. BOM Management: Ability to manage Bill of Materials (BOM) efficiently. Value Engineering: Demonstrable experience in value engineering to optimise cost and performance. AC/DC Conversion: In-depth knowledge of AC/DC conversion principles. Signal Routing: Proficient in routing SPI, I2C, and ADC signals. Circuit Debugging: Experience in debugging and analysing circuits using test equipment. Testing: Design and run suitable tests for hardware validation and performance. Qualifications: Proven experience in electronic design and PCB layout. Strong understanding of electrical engineering principles. Excellent problem-solving skills and attention to detail. Ability to work collaboratively in a team environment. Experience in energy metering and/or IOT space is advantageous What We Offer: Competitive salary and benefits package. Opportunity to work on cutting-edge projects in the sustainable energy sector. Collaborative and innovative work environment. Professional development and growth opportunities. If you are passionate about electronic design and sustainability. How to apply? Please email a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
14/10/2024
Full time
Job Title: Experienced Electronic Design Engineer Location: Reading, UK Salary: £45,000 - £60,000 Dependent on skills Key Responsibilities: PCB Design: Expert in Altium design software for creating and modifying PCB layouts. AC Voltage: Experience working with AC level voltages. BOM Management: Ability to manage Bill of Materials (BOM) efficiently. Value Engineering: Demonstrable experience in value engineering to optimise cost and performance. AC/DC Conversion: In-depth knowledge of AC/DC conversion principles. Signal Routing: Proficient in routing SPI, I2C, and ADC signals. Circuit Debugging: Experience in debugging and analysing circuits using test equipment. Testing: Design and run suitable tests for hardware validation and performance. Qualifications: Proven experience in electronic design and PCB layout. Strong understanding of electrical engineering principles. Excellent problem-solving skills and attention to detail. Ability to work collaboratively in a team environment. Experience in energy metering and/or IOT space is advantageous What We Offer: Competitive salary and benefits package. Opportunity to work on cutting-edge projects in the sustainable energy sector. Collaborative and innovative work environment. Professional development and growth opportunities. If you are passionate about electronic design and sustainability. How to apply? Please email a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
Senior Simulation Engineer - Automotive, Hydraulic, ANSYS, AMESIM Location: Gillingham, UK About the Company: A global leader in developing cutting-edge technologies, particularly in fuel systems, electrical systems, and aftermarket parts for internal combustion engines and industrial applications. The company is focused on creating clean, efficient, and high-value products to promote sustainability and aims to achieve carbon-free combustion. Their century-long Legacy of innovation and technological advancement underpins their commitment to building a brighter, more sustainable future. Job Purpose: Working within the Simulation Department on design assessment and optimisation of fuel injection systems using simulation techniques and physical test data. Key Responsibilities: Conduct appropriate simulations (with a particular focus on tribology and structural analysis ) to support design, development, validation, and manufacturing activities of diesel fuel injection system components. Work closely with product team members (Design and Development Engineers), following the project and proposing design and testing recommendations based on simulation results. Liaise with other functional groups (Materials, Validation) and customer teams to obtain and share information to improve the accuracy and value of simulation activities. Report to the Simulation Manager, documenting methods, assumptions, results, and conclusions. Prepare and present summaries of work to a diverse audience in-person and in conference calls. Support the development and implementation of new analysis techniques to improve simulation capabilities and product performance. Plan work activities effectively, support project planning, and complete work packages on time. Assist in arranging meetings and compiling agendas and minutes. What We're Looking For: Skills Mandatory: Application of simulation methodology and fundamental physical principles to the design of hydraulic components. Thorough knowledge of commercial simulation software like Ansys , AMESIM , and GT Suite . Desirable: Good understanding of tribology , ideally having worked on elasto-hydrodynamic analysis . Able to perform simulation with fluid-structural interaction . Attributes: Proven understanding of the principles of physics and mechanical engineering . Familiarity with fluid dynamics and metal fatigue principles. The ability to study a problem and identify the most appropriate analysis techniques (hand calculations, 1D/2D/3D, testing actual components). Understanding of the nature of models and the consequences of the assumptions used. Ability to work as part of a team whilst showing self-motivation and initiative. Some experience of following analysis procedures. Good communication and interpersonal skills, including the ability to communicate via reports, emails, and presentations. Be able to work, present, and communicate within all areas of the organisation, from shop floor to management. Knowledge of MS Word, Excel, PowerPoint, and SharePoint. Good written and spoken fluency in English. Ability to work under pressure and meet deadlines. Ability to prioritise and organise own workload. Ability to support problem-solving with structured methodologies. Willingness to travel for training, work with customers, and resolve problems with suppliers. Experience & Qualifications: Mandatory: Bachelor's degree or equivalent experience in a suitable engineering or business discipline. At least 5 years' experience using the above-mentioned simulation tools in an industrial setting. Desirable: At least 5 years' experience in analysis of high-pressure fuel injection systems and a detailed understanding of associated hydraulic components and advanced simulation methods applied to these. Understanding of drivetrain tribology . Experience with coding in Python . Experience with CAD/Solid Modelling , preferably with SolidWorks or NX . Understanding of detail drawing and geometric tolerancing. Familiarity with manufacturing processes such as grinding , heat treatment , and injection moulding . Benefits: 27 days of holiday + bank holidays. Long service holiday (if applicable). Working hours: 37 hours per week. Pension Scheme. Dental plan. Onsite parking. Staff discounts with selected retailers + wellbeing platforms. Discounted gym membership at Roko. On-site gym (£10 per month). Subsidised canteen. Friendly working environment. Relocation package of up to £6,000 (subject to criteria).
14/10/2024
Full time
Senior Simulation Engineer - Automotive, Hydraulic, ANSYS, AMESIM Location: Gillingham, UK About the Company: A global leader in developing cutting-edge technologies, particularly in fuel systems, electrical systems, and aftermarket parts for internal combustion engines and industrial applications. The company is focused on creating clean, efficient, and high-value products to promote sustainability and aims to achieve carbon-free combustion. Their century-long Legacy of innovation and technological advancement underpins their commitment to building a brighter, more sustainable future. Job Purpose: Working within the Simulation Department on design assessment and optimisation of fuel injection systems using simulation techniques and physical test data. Key Responsibilities: Conduct appropriate simulations (with a particular focus on tribology and structural analysis ) to support design, development, validation, and manufacturing activities of diesel fuel injection system components. Work closely with product team members (Design and Development Engineers), following the project and proposing design and testing recommendations based on simulation results. Liaise with other functional groups (Materials, Validation) and customer teams to obtain and share information to improve the accuracy and value of simulation activities. Report to the Simulation Manager, documenting methods, assumptions, results, and conclusions. Prepare and present summaries of work to a diverse audience in-person and in conference calls. Support the development and implementation of new analysis techniques to improve simulation capabilities and product performance. Plan work activities effectively, support project planning, and complete work packages on time. Assist in arranging meetings and compiling agendas and minutes. What We're Looking For: Skills Mandatory: Application of simulation methodology and fundamental physical principles to the design of hydraulic components. Thorough knowledge of commercial simulation software like Ansys , AMESIM , and GT Suite . Desirable: Good understanding of tribology , ideally having worked on elasto-hydrodynamic analysis . Able to perform simulation with fluid-structural interaction . Attributes: Proven understanding of the principles of physics and mechanical engineering . Familiarity with fluid dynamics and metal fatigue principles. The ability to study a problem and identify the most appropriate analysis techniques (hand calculations, 1D/2D/3D, testing actual components). Understanding of the nature of models and the consequences of the assumptions used. Ability to work as part of a team whilst showing self-motivation and initiative. Some experience of following analysis procedures. Good communication and interpersonal skills, including the ability to communicate via reports, emails, and presentations. Be able to work, present, and communicate within all areas of the organisation, from shop floor to management. Knowledge of MS Word, Excel, PowerPoint, and SharePoint. Good written and spoken fluency in English. Ability to work under pressure and meet deadlines. Ability to prioritise and organise own workload. Ability to support problem-solving with structured methodologies. Willingness to travel for training, work with customers, and resolve problems with suppliers. Experience & Qualifications: Mandatory: Bachelor's degree or equivalent experience in a suitable engineering or business discipline. At least 5 years' experience using the above-mentioned simulation tools in an industrial setting. Desirable: At least 5 years' experience in analysis of high-pressure fuel injection systems and a detailed understanding of associated hydraulic components and advanced simulation methods applied to these. Understanding of drivetrain tribology . Experience with coding in Python . Experience with CAD/Solid Modelling , preferably with SolidWorks or NX . Understanding of detail drawing and geometric tolerancing. Familiarity with manufacturing processes such as grinding , heat treatment , and injection moulding . Benefits: 27 days of holiday + bank holidays. Long service holiday (if applicable). Working hours: 37 hours per week. Pension Scheme. Dental plan. Onsite parking. Staff discounts with selected retailers + wellbeing platforms. Discounted gym membership at Roko. On-site gym (£10 per month). Subsidised canteen. Friendly working environment. Relocation package of up to £6,000 (subject to criteria).
Electrical & Instrumentation Designer - £52 per hour - Inside IR35 Lancashire - Hybrid (3 days onsite a week) - 6 months rolling Yolk recruitment is recruiting for an Electrical & Instrumentation Designer to work with a world leader in manufacturing and scientific research. You will be responsible for the creation and development of electrical and instrumentation design drawings, construction and demolition requirements, identification of testing requirements and to assist with troubleshooting of modifications and new installations. This role supports the sites continuous improvement activities as well as supporting new Capital Project developments to meet business and site needs. Responsibilities: Estimation of costings for E/I design and installation Design and modification of schematic diagrams, single line diagrams, loop drawings, cable routing drawings, panel layout drawings, block cable diagrams, motor control centres Drafting of scopes of work, bill of materials, termination schedules, equipment data sheets, cable schedules, labelling schedules, proof testing documents, cable transfer documents Supporting the installation supervisor by providing design packs and technical support as required. Conducting FAT's on site and at supplier locations Reporting of work status to management in regular briefings Self-manage and progress design office requests to an agreed priority list Experience Required: HNC in Electrical Design or equivalent A good understanding of P&ID's, line diagrams, process data sheets and mechanical drawings Competent in the use of AutoCAD 2019 A working knowledge in low voltage power system design A good knowledge in instrumentation and control loop design Desirable Experience: A working knowledge of DCS/PLC systems (Emerson Delta V, Hima Sella Safety Systems and Mitsubishi PLC's) A working knowledge of motor control systems (Variable Speed Drives, Soft start, DOL) A working knowledge of safety systems and equipment including Safety Instrumented Systems IOSH or NEBOSH Are you up to the challenge? If you feel you have the skills, experience, and passion to be successful in this role, apply now. Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive, we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying, then unfortunately you have been unsuccessful. Please keep an eye on our website for more opportunities.
14/10/2024
Project-based
Electrical & Instrumentation Designer - £52 per hour - Inside IR35 Lancashire - Hybrid (3 days onsite a week) - 6 months rolling Yolk recruitment is recruiting for an Electrical & Instrumentation Designer to work with a world leader in manufacturing and scientific research. You will be responsible for the creation and development of electrical and instrumentation design drawings, construction and demolition requirements, identification of testing requirements and to assist with troubleshooting of modifications and new installations. This role supports the sites continuous improvement activities as well as supporting new Capital Project developments to meet business and site needs. Responsibilities: Estimation of costings for E/I design and installation Design and modification of schematic diagrams, single line diagrams, loop drawings, cable routing drawings, panel layout drawings, block cable diagrams, motor control centres Drafting of scopes of work, bill of materials, termination schedules, equipment data sheets, cable schedules, labelling schedules, proof testing documents, cable transfer documents Supporting the installation supervisor by providing design packs and technical support as required. Conducting FAT's on site and at supplier locations Reporting of work status to management in regular briefings Self-manage and progress design office requests to an agreed priority list Experience Required: HNC in Electrical Design or equivalent A good understanding of P&ID's, line diagrams, process data sheets and mechanical drawings Competent in the use of AutoCAD 2019 A working knowledge in low voltage power system design A good knowledge in instrumentation and control loop design Desirable Experience: A working knowledge of DCS/PLC systems (Emerson Delta V, Hima Sella Safety Systems and Mitsubishi PLC's) A working knowledge of motor control systems (Variable Speed Drives, Soft start, DOL) A working knowledge of safety systems and equipment including Safety Instrumented Systems IOSH or NEBOSH Are you up to the challenge? If you feel you have the skills, experience, and passion to be successful in this role, apply now. Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive, we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying, then unfortunately you have been unsuccessful. Please keep an eye on our website for more opportunities.
Technical Support Engineer - Field Service, Electronics, Electrical, Repairing, Maintenance Location: Lewes, East Sussex Salary: Competitive, with benefits including pension, private medical insurance, and a company van. A leading global manufacturer of passenger information systems for public transport is seeking a skilled Technical Support Engineer to join their expanding team. Specialising in innovative solutions for the transport industry, this company designs, develops, and manufactures cutting-edge technology at their headquarters in Lewes, East Sussex, while also operating internationally with offices and partners around the world. This role is an exciting opportunity to work in a company at the forefront of technological change, where you will be involved in everything from on-site installations and repairs to remote troubleshooting and customer support. Responsibilities: Attend various customer sites across the UK to perform installations, repairs, surveys, and upgrades of equipment. Answer technical queries via email, phone, and video conferencing platforms such as Teams. Configure equipment and prepare media content using bespoke software tools. Collaborate with sales, R&D, and production teams to resolve issues and improve product performance. Provide first-line support on products, troubleshooting hardware and software issues. Carry out site evaluations and offer suggestions for improvements. Deliver training to customers on in-house software and hardware solutions. Participate in team meetings and occasional travel to the head office in Lewes. Requirements: Ability to work independently or as part of a team, demonstrating flexibility in problem-solving. Experience in repairing electrical and electronic devices (soldering, cable repairs, crimping). Full UK driving license and willingness to travel within the UK and occasionally abroad. Excellent written and verbal communication skills. Proficient with Windows operating systems and Microsoft Office packages. Familiar with networking and serial protocols. A organised approach to tasks, with the ability to manage multiple projects simultaneously. Comfortable with overnight stays away from home when required. Desirable Skills: Experience with serial communication standards and protocols. Familiarity with Linux operating systems. Understanding of electrical and electronic system design (circuit diagrams, wiring). Previous technical support experience, especially in the public transport or manufacturing sectors.
14/10/2024
Full time
Technical Support Engineer - Field Service, Electronics, Electrical, Repairing, Maintenance Location: Lewes, East Sussex Salary: Competitive, with benefits including pension, private medical insurance, and a company van. A leading global manufacturer of passenger information systems for public transport is seeking a skilled Technical Support Engineer to join their expanding team. Specialising in innovative solutions for the transport industry, this company designs, develops, and manufactures cutting-edge technology at their headquarters in Lewes, East Sussex, while also operating internationally with offices and partners around the world. This role is an exciting opportunity to work in a company at the forefront of technological change, where you will be involved in everything from on-site installations and repairs to remote troubleshooting and customer support. Responsibilities: Attend various customer sites across the UK to perform installations, repairs, surveys, and upgrades of equipment. Answer technical queries via email, phone, and video conferencing platforms such as Teams. Configure equipment and prepare media content using bespoke software tools. Collaborate with sales, R&D, and production teams to resolve issues and improve product performance. Provide first-line support on products, troubleshooting hardware and software issues. Carry out site evaluations and offer suggestions for improvements. Deliver training to customers on in-house software and hardware solutions. Participate in team meetings and occasional travel to the head office in Lewes. Requirements: Ability to work independently or as part of a team, demonstrating flexibility in problem-solving. Experience in repairing electrical and electronic devices (soldering, cable repairs, crimping). Full UK driving license and willingness to travel within the UK and occasionally abroad. Excellent written and verbal communication skills. Proficient with Windows operating systems and Microsoft Office packages. Familiar with networking and serial protocols. A organised approach to tasks, with the ability to manage multiple projects simultaneously. Comfortable with overnight stays away from home when required. Desirable Skills: Experience with serial communication standards and protocols. Familiarity with Linux operating systems. Understanding of electrical and electronic system design (circuit diagrams, wiring). Previous technical support experience, especially in the public transport or manufacturing sectors.
We are currently looking on behalf of one of our important clients for a Java Software Developer (Embedded Systems) - Medical Device Sector. The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Design, setup & support of test systems, test tools & software test frameworks for Medical Devices. Collaborate with development teams of different products to establish a common approach for test systems across these products. Support the validation of test systems, test tools & software test frameworks. Maintain & document test systems. Your Skills: At least 5 years of professional experience in Software Development including strong experience & expertise in Java Solid skills & experience in Embedded Systems is a must. Ideally experienced in C & Python. Any expertise in CI/CD pipelines, MS Azure, Git & DOORS is advantageous. Experienced within Highly Regulated Environments (eg the Medical Technology, Automotive or Aerospace Industries). Your Profile: Completed University Degree in Computer Science or Electrical Engineering (or similar). Ideally an ISTQB Certified Tester. Fluent in English (spoken & written). Any German language skills are considered a plus.
11/10/2024
Full time
We are currently looking on behalf of one of our important clients for a Java Software Developer (Embedded Systems) - Medical Device Sector. The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Design, setup & support of test systems, test tools & software test frameworks for Medical Devices. Collaborate with development teams of different products to establish a common approach for test systems across these products. Support the validation of test systems, test tools & software test frameworks. Maintain & document test systems. Your Skills: At least 5 years of professional experience in Software Development including strong experience & expertise in Java Solid skills & experience in Embedded Systems is a must. Ideally experienced in C & Python. Any expertise in CI/CD pipelines, MS Azure, Git & DOORS is advantageous. Experienced within Highly Regulated Environments (eg the Medical Technology, Automotive or Aerospace Industries). Your Profile: Completed University Degree in Computer Science or Electrical Engineering (or similar). Ideally an ISTQB Certified Tester. Fluent in English (spoken & written). Any German language skills are considered a plus.
Electronics Design Engineer Lynx Recruitment is working with a leading optics and photonics company, is seeking an Electronics Design Engineer to join their team in Torquay. This is an exciting opportunity to contribute to the development of cutting-edge optoelectronic products and sub-systems. Key Responsibilities: Electronic design engineering from concept to prototype, including schematics, PCB layout, and testing Design of analog and digital circuits for applications such as Laser drivers, optical detection, and control electronics Develop Embedded firmware/software for microcontroller-based opto-electronic systems Support design verification, reliability analysis, and obsolescence management Collaborate with optical, mechanical, and systems engineering teams Help generate solutions to meet customer requirements and support new business opportunities Requirements: 3-5 years of experience in an electronics design and development role, preferably in the optics/photonics industry Strong working knowledge of analog and digital circuit design principles Proficient in firmware/software development for ARM-based microcontrollers, with experience in C/C++ Skilled in schematic capture, PCB layout, and prototyping using tools like Altium Familiarity with laboratory test equipment and validation procedures Bachelor's degree in Electrical or Electronics Engineering Ability to work collaboratively in a multidisciplinary team environment Good problem-solving skills and attention to detail Benefits: Hybrid work model - 2 days WFH per week 25 days holiday plus bank holidays Company pension (6% contribution) Company bonus scheme Health Cash Plan SAYE Scheme If you have a passion for electronics and optoelectronics, and want to contribute to the development of innovative products, we encourage you to apply for this role.
11/10/2024
Full time
Electronics Design Engineer Lynx Recruitment is working with a leading optics and photonics company, is seeking an Electronics Design Engineer to join their team in Torquay. This is an exciting opportunity to contribute to the development of cutting-edge optoelectronic products and sub-systems. Key Responsibilities: Electronic design engineering from concept to prototype, including schematics, PCB layout, and testing Design of analog and digital circuits for applications such as Laser drivers, optical detection, and control electronics Develop Embedded firmware/software for microcontroller-based opto-electronic systems Support design verification, reliability analysis, and obsolescence management Collaborate with optical, mechanical, and systems engineering teams Help generate solutions to meet customer requirements and support new business opportunities Requirements: 3-5 years of experience in an electronics design and development role, preferably in the optics/photonics industry Strong working knowledge of analog and digital circuit design principles Proficient in firmware/software development for ARM-based microcontrollers, with experience in C/C++ Skilled in schematic capture, PCB layout, and prototyping using tools like Altium Familiarity with laboratory test equipment and validation procedures Bachelor's degree in Electrical or Electronics Engineering Ability to work collaboratively in a multidisciplinary team environment Good problem-solving skills and attention to detail Benefits: Hybrid work model - 2 days WFH per week 25 days holiday plus bank holidays Company pension (6% contribution) Company bonus scheme Health Cash Plan SAYE Scheme If you have a passion for electronics and optoelectronics, and want to contribute to the development of innovative products, we encourage you to apply for this role.
Hardware Design Engineer Cambridge, UK | Up to £60,000 per annum Summary Our client, a global leader in narrowband RF Smart Mesh Networks, is seeking a talented Hardware Design Engineer to join their innovative team in Cambridge, UK. As a Hardware Design Engineer, you'll be at the forefront of developing next-generation IoT and wireless communication products. You'll work on challenging projects, collaborating with cross-functional teams to bring innovative ideas to life. Key Responsibilities: Design and develop hardware for RF Smart Mesh Network products Create schematics and PCB layouts for complex multi-layer boards Work on sub-1GHz RF designs and cellular technology-based products Perform hardware validation and testing Ensure designs meet manufacturing and testing requirements Participate in compliance and certification processes Requirements: 5-7 years of experience in hardware design, focusing on RF and wireless communications Proficiency in PCB design software, preferably Altium Designer Strong experience in sub-GHz RF design for IoT devices Knowledge of cellular modem integration (2G/3G/4G/5G) Familiarity with power supply design and high-speed interfaces Experience with DFM/DFT for medium to high-volume manufacturing Hands-on experience with RF test equipment Bachelor's or Master's degree in Electrical Engineering, Electronics, or related field Desirables: Experience with PCB antenna design for sub-1GHz RF modules Knowledge of EMC/EMI testing and debugging Familiarity with international product certification processes Benefits: Share options Generous annual leave Private health insurance Pension scheme Life cover Opportunity to work with cutting-edge technology Professional development and growth opportunities If you're ready to take your career to the next level and contribute to ground-breaking RF and wireless technologies, we want to hear from you! Our client is an equal opportunity employer and value diversity in their company. They do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.
11/10/2024
Full time
Hardware Design Engineer Cambridge, UK | Up to £60,000 per annum Summary Our client, a global leader in narrowband RF Smart Mesh Networks, is seeking a talented Hardware Design Engineer to join their innovative team in Cambridge, UK. As a Hardware Design Engineer, you'll be at the forefront of developing next-generation IoT and wireless communication products. You'll work on challenging projects, collaborating with cross-functional teams to bring innovative ideas to life. Key Responsibilities: Design and develop hardware for RF Smart Mesh Network products Create schematics and PCB layouts for complex multi-layer boards Work on sub-1GHz RF designs and cellular technology-based products Perform hardware validation and testing Ensure designs meet manufacturing and testing requirements Participate in compliance and certification processes Requirements: 5-7 years of experience in hardware design, focusing on RF and wireless communications Proficiency in PCB design software, preferably Altium Designer Strong experience in sub-GHz RF design for IoT devices Knowledge of cellular modem integration (2G/3G/4G/5G) Familiarity with power supply design and high-speed interfaces Experience with DFM/DFT for medium to high-volume manufacturing Hands-on experience with RF test equipment Bachelor's or Master's degree in Electrical Engineering, Electronics, or related field Desirables: Experience with PCB antenna design for sub-1GHz RF modules Knowledge of EMC/EMI testing and debugging Familiarity with international product certification processes Benefits: Share options Generous annual leave Private health insurance Pension scheme Life cover Opportunity to work with cutting-edge technology Professional development and growth opportunities If you're ready to take your career to the next level and contribute to ground-breaking RF and wireless technologies, we want to hear from you! Our client is an equal opportunity employer and value diversity in their company. They do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.
Senior Electronics Design Engineer Lynx Recruitment is working with a leading optics and photonics company, to recruit a Senior Electronic Systems Engineer to join their team in St Asaph, North Wales. Key Responsibilities: Lead the design of electronic sub-systems, including requirements analysis and specification development Design of Laser drivers, optical detection circuits, and digital control electronics Produce and maintain Embedded firmware/software for digital control of opto-electronic sub-systems Perform reliability and parts stress analysis, and manage obsolescence Support new business opportunities and generate solutions for customers Assist with the gate review and handover process from design to production Requirements: Industrial experience in an electronics design and development function Strong analog/digital/mixed signal circuit design skills Experience in firmware/software development for ARM-based microcontrollers Proficient in schematic capture and PCB layout (eg, Altium) Experience with prototyping and laboratory test equipment Bachelor's degree in Electrical and/or Electronics Engineering Benefits: Competitive salary up to £70k Hybrid work model - 2 days WFH 25 days holiday plus bank holidays Company pension (6% contribution) Company bonus scheme Health Cash Plan SAYE Scheme
11/10/2024
Full time
Senior Electronics Design Engineer Lynx Recruitment is working with a leading optics and photonics company, to recruit a Senior Electronic Systems Engineer to join their team in St Asaph, North Wales. Key Responsibilities: Lead the design of electronic sub-systems, including requirements analysis and specification development Design of Laser drivers, optical detection circuits, and digital control electronics Produce and maintain Embedded firmware/software for digital control of opto-electronic sub-systems Perform reliability and parts stress analysis, and manage obsolescence Support new business opportunities and generate solutions for customers Assist with the gate review and handover process from design to production Requirements: Industrial experience in an electronics design and development function Strong analog/digital/mixed signal circuit design skills Experience in firmware/software development for ARM-based microcontrollers Proficient in schematic capture and PCB layout (eg, Altium) Experience with prototyping and laboratory test equipment Bachelor's degree in Electrical and/or Electronics Engineering Benefits: Competitive salary up to £70k Hybrid work model - 2 days WFH 25 days holiday plus bank holidays Company pension (6% contribution) Company bonus scheme Health Cash Plan SAYE Scheme
Senior Electronic Design Engineer Lynx Recruitment is working with a leading optics and photonics company, to recruit a Senior Electronics Design Engineer to join their team in Torquay. Key Responsibilities: Electronic design engineering from concept to manufacture and test Lead the design of electronic sub-systems, including requirements analysis and specification development Design of Laser drivers, optical detection circuits, and digital control electronics Produce and maintain Embedded firmware/software for digital control of opto-electronic sub-systems Perform reliability and parts stress analysis, and manage obsolescence Support new business opportunities and generate solutions for customers Assist with the gate review and handover process from design to production Requirements: Industrial experience in an electronics design and development function Strong analog/digital/mixed signal circuit design skills Experience in firmware/software development for ARM-based microcontrollers Proficient in schematic capture and PCB layout (eg, Altium) Experience with prototyping and laboratory test equipment Bachelor's degree in Electrical and/or Electronics Engineering Benefits: Hybrid work model - 2 days WFH each week 25 days holiday plus bank holidays Company pension (6% contribution) Company bonus scheme Health Cash Plan SAYE Scheme
11/10/2024
Full time
Senior Electronic Design Engineer Lynx Recruitment is working with a leading optics and photonics company, to recruit a Senior Electronics Design Engineer to join their team in Torquay. Key Responsibilities: Electronic design engineering from concept to manufacture and test Lead the design of electronic sub-systems, including requirements analysis and specification development Design of Laser drivers, optical detection circuits, and digital control electronics Produce and maintain Embedded firmware/software for digital control of opto-electronic sub-systems Perform reliability and parts stress analysis, and manage obsolescence Support new business opportunities and generate solutions for customers Assist with the gate review and handover process from design to production Requirements: Industrial experience in an electronics design and development function Strong analog/digital/mixed signal circuit design skills Experience in firmware/software development for ARM-based microcontrollers Proficient in schematic capture and PCB layout (eg, Altium) Experience with prototyping and laboratory test equipment Bachelor's degree in Electrical and/or Electronics Engineering Benefits: Hybrid work model - 2 days WFH each week 25 days holiday plus bank holidays Company pension (6% contribution) Company bonus scheme Health Cash Plan SAYE Scheme