We are currently looking on behalf of one of our important clients for a Hardware Development Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with some home office allowance. Your Role: Actively drive concept generation, analysis & development of innovative electronics solutions & system architectures state of the art Medical Devices in accordance with design, development & control processes Deliver functionally safe solutions with significant elements of cross-functional design eg mechanical, software, firmware in compliance with ISO 13485 & FDA Medical Device Design Control processes. Contribute to requirements definition & create design documentation & verification test plans. Participate in peer reviewing hardware development artifacts. Support the verification team with HW related verifications including CB certifications for IEC 60601-1. Drive new component introduction & obsolescence management together with third party suppliers. Provide 3rd level product care HW improvements relating to an existing product range through continuous refinement & innovative technology solutions. Perform root cause analysis as part of 3rd level support for complaints/production issues & generate technical reports. Your Skills: At least 5 years of relevant professional experience in Hardware Development Engineering. Skilled & experienced in Developing Embedded Hardware Solutions, ideally including within the Medical Device Sector. A strong knowledge of Electronics Assembly Processes & Test Methodologies. Ideally experienced in Altium Designer & DOORS Next. Your Profile: Completed Higher Education/University Degree Electronic Engineering (or similar). Efficient, resilient, organized, communicative, customer-focused & team-oriented. Fluent in English (spoken & written), German language skills are considered highly advantageous.
06/09/2024
Full time
We are currently looking on behalf of one of our important clients for a Hardware Development Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with some home office allowance. Your Role: Actively drive concept generation, analysis & development of innovative electronics solutions & system architectures state of the art Medical Devices in accordance with design, development & control processes Deliver functionally safe solutions with significant elements of cross-functional design eg mechanical, software, firmware in compliance with ISO 13485 & FDA Medical Device Design Control processes. Contribute to requirements definition & create design documentation & verification test plans. Participate in peer reviewing hardware development artifacts. Support the verification team with HW related verifications including CB certifications for IEC 60601-1. Drive new component introduction & obsolescence management together with third party suppliers. Provide 3rd level product care HW improvements relating to an existing product range through continuous refinement & innovative technology solutions. Perform root cause analysis as part of 3rd level support for complaints/production issues & generate technical reports. Your Skills: At least 5 years of relevant professional experience in Hardware Development Engineering. Skilled & experienced in Developing Embedded Hardware Solutions, ideally including within the Medical Device Sector. A strong knowledge of Electronics Assembly Processes & Test Methodologies. Ideally experienced in Altium Designer & DOORS Next. Your Profile: Completed Higher Education/University Degree Electronic Engineering (or similar). Efficient, resilient, organized, communicative, customer-focused & team-oriented. Fluent in English (spoken & written), German language skills are considered highly advantageous.
Details: Inside IR35 9 month contract Onsite requirement 50% of the time ie 3 days one week, 2 days next week - Reason for this is due to nature of the work, you will be working closely with hardware and equipment, so need to be onsite to be productive. Title Senior Systems Software Development Engineer Overview This position is for a highly proficient software engineer who likes turning advanced research into working systems, and who will have the opportunity to impact the progress of an exciting new storage system. You would be responsible for working on the Embedded software controlling hardware within read systems. This role is for supporting the Product Development Team. Come and join an incredibly talented multi-disciplinary team of Laser scientists, optical physicists, electronics engineers, and computer scientists working together to build this storage technology of the future. Responsibilities Designing and implementing the Embedded software architecture and code base to support the Read and Writer Systems. Working closely with system designers, electronics engineers, FPGA developers, and mechanical engineers to understand their requirements and implement suitable software solutions. Maintaining and improving the existing Rust codebase. Diagnosing and troubleshooting interactions between the hardware and the software. Skillset Creation of Real Time Embedded code in a Linux environment to control custom electronic subsystems. Experience with Linux, down to the device tree level. Experience interfacing with hardware (device register access, cache coherency, memory-mapped IO). Rust coding experience . Proficient at communication and team working in a multi-disciplinary and highly agile environment. Able to work independently with minimal supervision towards only partly-defined tasks, interacting with others in the team to clarify needs and iterate quickly. Useful Experience Hard processor systems (HPS) running on FPGAs (ARM processors). Interaction with FPGAs/Firmware. Intel/Altera HPS ecosystem - exposure to VHDL, QSYS, and SignalTap. Control of Scientific or Industrial equipment. Qualifications Bachelor's in Computer Science/Scientific/Engineering disciplines + 5 years' experience . Typical Day in the Role Some time would be spent talking to FPGA, electronic, or mechanical engineers to understand their requirements. Some time would be spent designing and proposing ways to meet those requirements. The bulk of the time would be spent implementing and debugging/testing the new functionality. Many of these new features would be implemented in the context of an existing codebase, so there will also be adaptation and improvement of this. Candidate Value Proposition This is a chance to work with some amazing people in a cross-disciplinary team building real hardware and pushing the boundaries of science. Job Title: Senior Systems Software Development Engineer Location: Cambridge, UK Rate/Salary: .00 GBP Daily Job Type: Contract Trading as TEKsystems. Allegis Group Limited, Bracknell, RG12 1RT, United Kingdom. No Allegis Group Limited operates as an Employment Business and Employment Agency as set out in the Conduct of Employment Agencies and Employment Businesses Regulations 2003. TEKsystems is a company within the Allegis Group network of companies (collectively referred to as "Allegis Group"). Aerotek, Aston Carter, EASi, Talentis Solutions, TEKsystems, Stamford Consultants and The Stamford Group are Allegis Group brands. If you apply, your personal data will be processed as described in the Allegis Group Online Privacy Notice available at our website. To access our Online Privacy Notice, which explains what information we may collect, use, share, and store about you, and describes your rights and choices about this, please go our website. We are part of a global network of companies and as a result, the personal data you provide will be shared within Allegis Group and transferred and processed outside the UK, Switzerland and European Economic Area subject to the protections described in the Allegis Group Online Privacy Notice. We store personal data in the UK, EEA, Switzerland and the USA. If you would like to exercise your privacy rights, please visit the "Contacting Us" section of our Online Privacy Notice on our website for details on how to contact us. To protect your privacy and security, we may take steps to verify your identity, such as a password and user ID if there is an account associated with your request, or identifying information such as your address or date of birth, before proceeding with your request. commitments under the UK Data Protection Act, EU-U.S. Privacy Shield or the Swiss-U.S. Privacy Shield.
06/09/2024
Project-based
Details: Inside IR35 9 month contract Onsite requirement 50% of the time ie 3 days one week, 2 days next week - Reason for this is due to nature of the work, you will be working closely with hardware and equipment, so need to be onsite to be productive. Title Senior Systems Software Development Engineer Overview This position is for a highly proficient software engineer who likes turning advanced research into working systems, and who will have the opportunity to impact the progress of an exciting new storage system. You would be responsible for working on the Embedded software controlling hardware within read systems. This role is for supporting the Product Development Team. Come and join an incredibly talented multi-disciplinary team of Laser scientists, optical physicists, electronics engineers, and computer scientists working together to build this storage technology of the future. Responsibilities Designing and implementing the Embedded software architecture and code base to support the Read and Writer Systems. Working closely with system designers, electronics engineers, FPGA developers, and mechanical engineers to understand their requirements and implement suitable software solutions. Maintaining and improving the existing Rust codebase. Diagnosing and troubleshooting interactions between the hardware and the software. Skillset Creation of Real Time Embedded code in a Linux environment to control custom electronic subsystems. Experience with Linux, down to the device tree level. Experience interfacing with hardware (device register access, cache coherency, memory-mapped IO). Rust coding experience . Proficient at communication and team working in a multi-disciplinary and highly agile environment. Able to work independently with minimal supervision towards only partly-defined tasks, interacting with others in the team to clarify needs and iterate quickly. Useful Experience Hard processor systems (HPS) running on FPGAs (ARM processors). Interaction with FPGAs/Firmware. Intel/Altera HPS ecosystem - exposure to VHDL, QSYS, and SignalTap. Control of Scientific or Industrial equipment. Qualifications Bachelor's in Computer Science/Scientific/Engineering disciplines + 5 years' experience . Typical Day in the Role Some time would be spent talking to FPGA, electronic, or mechanical engineers to understand their requirements. Some time would be spent designing and proposing ways to meet those requirements. The bulk of the time would be spent implementing and debugging/testing the new functionality. Many of these new features would be implemented in the context of an existing codebase, so there will also be adaptation and improvement of this. Candidate Value Proposition This is a chance to work with some amazing people in a cross-disciplinary team building real hardware and pushing the boundaries of science. Job Title: Senior Systems Software Development Engineer Location: Cambridge, UK Rate/Salary: .00 GBP Daily Job Type: Contract Trading as TEKsystems. Allegis Group Limited, Bracknell, RG12 1RT, United Kingdom. No Allegis Group Limited operates as an Employment Business and Employment Agency as set out in the Conduct of Employment Agencies and Employment Businesses Regulations 2003. TEKsystems is a company within the Allegis Group network of companies (collectively referred to as "Allegis Group"). Aerotek, Aston Carter, EASi, Talentis Solutions, TEKsystems, Stamford Consultants and The Stamford Group are Allegis Group brands. If you apply, your personal data will be processed as described in the Allegis Group Online Privacy Notice available at our website. To access our Online Privacy Notice, which explains what information we may collect, use, share, and store about you, and describes your rights and choices about this, please go our website. We are part of a global network of companies and as a result, the personal data you provide will be shared within Allegis Group and transferred and processed outside the UK, Switzerland and European Economic Area subject to the protections described in the Allegis Group Online Privacy Notice. We store personal data in the UK, EEA, Switzerland and the USA. If you would like to exercise your privacy rights, please visit the "Contacting Us" section of our Online Privacy Notice on our website for details on how to contact us. To protect your privacy and security, we may take steps to verify your identity, such as a password and user ID if there is an account associated with your request, or identifying information such as your address or date of birth, before proceeding with your request. commitments under the UK Data Protection Act, EU-U.S. Privacy Shield or the Swiss-U.S. Privacy Shield.
ePlan Architect Initial 6 month freelance contract + extensions Barneveld, Netherlands 2 days remote per week For our R&D department we are looking for a ePlan Architect for a minimum expected duration of 6 months with an option to extend. You will be part of our eCAD team and work as a technical lead on our ePlan strategy and design for our egg sorting and packaging machines. YOUR FUNCTION Our client is the global market leader in innovative machines for sorting, packaging, and processing eggs. From design, development, production, and installation to service, all of this can be found in Barneveld. As an ePlan Architect you are primarily responsible for setting up an eCAD strategy and you will then implement it according to the detailed step-by-step plan. What kind of activities can you specifically think of? . Understand and improve our company-wide CTO process flow from a hardware perspective; . In collaboration with the other disciplines, set up our client's eCad vision and strategy for both our existing and new portfolio and also propagate this in the rest of the organization; . Standardize and roll out ePlan (drawings and articles) processes and methods; . Setting up mechatronic, modular, and configurable ePlan project templates; . Prepare automation (tooling) advice and implement roadmap; WHAT DO WE ASK FROM YOU? . Proven experience in a similar position is a must; . Analytical thinking and persuasiveness; . Involvement and passion in the development of the chosen solution; . Knowledge and experience of mechanical engineering standards and guidelines is a must; . A good command of the Dutch and English language, spoken and written. WHO ARE YOU? . You represent our client's core values: You show ownership in your work, are innovative and work together with your team; . You are driven and have great analytical skills, where you approach a situation from a broad perspective, recognize important information and then logically organize it into main and secondary issues; . You are flexible, able to adapt to changes and open to new ideas; . You act results-oriented, so that you tailor decisions to achieving the intended objectives; . You actively contribute to achieving shared goals through coordination, support and collaboration; . You have persuasive power, allowing you to influence the attitude and opinion of others through your expertise, communication skills and personal presentation to gain approval for proposals, plans and ideas.
03/09/2024
Project-based
ePlan Architect Initial 6 month freelance contract + extensions Barneveld, Netherlands 2 days remote per week For our R&D department we are looking for a ePlan Architect for a minimum expected duration of 6 months with an option to extend. You will be part of our eCAD team and work as a technical lead on our ePlan strategy and design for our egg sorting and packaging machines. YOUR FUNCTION Our client is the global market leader in innovative machines for sorting, packaging, and processing eggs. From design, development, production, and installation to service, all of this can be found in Barneveld. As an ePlan Architect you are primarily responsible for setting up an eCAD strategy and you will then implement it according to the detailed step-by-step plan. What kind of activities can you specifically think of? . Understand and improve our company-wide CTO process flow from a hardware perspective; . In collaboration with the other disciplines, set up our client's eCad vision and strategy for both our existing and new portfolio and also propagate this in the rest of the organization; . Standardize and roll out ePlan (drawings and articles) processes and methods; . Setting up mechatronic, modular, and configurable ePlan project templates; . Prepare automation (tooling) advice and implement roadmap; WHAT DO WE ASK FROM YOU? . Proven experience in a similar position is a must; . Analytical thinking and persuasiveness; . Involvement and passion in the development of the chosen solution; . Knowledge and experience of mechanical engineering standards and guidelines is a must; . A good command of the Dutch and English language, spoken and written. WHO ARE YOU? . You represent our client's core values: You show ownership in your work, are innovative and work together with your team; . You are driven and have great analytical skills, where you approach a situation from a broad perspective, recognize important information and then logically organize it into main and secondary issues; . You are flexible, able to adapt to changes and open to new ideas; . You act results-oriented, so that you tailor decisions to achieving the intended objectives; . You actively contribute to achieving shared goals through coordination, support and collaboration; . You have persuasive power, allowing you to influence the attitude and opinion of others through your expertise, communication skills and personal presentation to gain approval for proposals, plans and ideas.
Title: Electronics Engineer Robotics Start Date: ASAP Contract Length: initial 6 months contract (with option of multiple extensions) Remote/Home Office: Yes, but onsite tasks no full remote possible Industry: Biotech, Medical Device On behalf of our client, one of the world's largest biotech companies, we are looking for an Electronics Engineer Robotics. The perfect candidate should have experience with robotic solutions (preferably OMRON robots) and would have a broad interest in multi-disciplinary areas like electronics, robotics, mechanical engineering as well as experience . The perfect candidate: Team player with excellent communication skills Broad interest in multi-disciplinary areas like electronics, robotics, lab workflows, mechanical engineering, physics etc. Willingness to challenge and assess ideas, results and solutions, ability to compromise combined with persuasiveness Autonomous working style, open-minded towards new methods and topics and act as a mentor to emerging engineers Tasks & Responsibilities Be the subject matter expert for the assigned area of responsibility that requires understanding of workflows in a laboratory environment to solve challenges, increase effectiveness and quality. Bring in your ideas and experience in electronics from mixed/analogue and digital circuit design and layout up to system level in a multidisciplinary team Create, adapt, and optimize electrical/electronic architectures and technical specifications for modules and components in diagnostic laboratory automation systems or experimental breadboards. Conduct analyses, technical calculations and simulations of electrical circuits and work according to quality standards and safety guidelines in medical engineering. Compile, document and present findings, insights and proposals linked to technical and business impact(s) Must Haves: Master from an Applied Science or Technical University in the fields of Electrical Engineering or similar with professional experience Experience with robotic solutions (eg OMRON robots) Experience in electronics design, using EDA software and programming of Embedded systems Experience in programming (eg C, C++, Python,), data processing and system simulation Skills: C C++ Python OMRON Robotics Job Title: Electronics Engineer Robotics Location: Zug, Switzerland Job Type: Contract TEKsystems, an Allegis Group company. Allegis Group AG, Aeschengraben 20, CH-4051 Basel, Switzerland. Registration No. CHE-101.865.121. TEKsystems is a company within the Allegis Group network of companies (collectively referred to as "Allegis Group"). Aerotek, Aston Carter, EASi, TEKsystems, Stamford Consultants and The Stamford Group are Allegis Group brands. If you apply, your personal data will be processed as described in the Allegis Group Online Privacy Notice available at our website. To access our Online Privacy Notice, which explains what information we may collect, use, share, and store about you, and describes your rights and choices about this, please go our website. We are part of a global network of companies and as a result, the personal data you provide will be shared within Allegis Group and transferred and processed outside the UK, Switzerland and European Economic Area subject to the protections described in the Allegis Group Online Privacy Notice. We store personal data in the UK, EEA, Switzerland and the USA. If you would like to exercise your privacy rights, please visit the "Contacting Us" section of our Online Privacy Notice on our website for details on how to contact us. To protect your privacy and security, we may take steps to verify your identity, such as a password and user ID if there is an account associated with your request, or identifying information such as your address or date of birth, before proceeding with your request. commitments under the UK Data Protection Act, EU-U.S. Privacy Shield or the Swiss-U.S. Privacy Shield.
03/09/2024
Project-based
Title: Electronics Engineer Robotics Start Date: ASAP Contract Length: initial 6 months contract (with option of multiple extensions) Remote/Home Office: Yes, but onsite tasks no full remote possible Industry: Biotech, Medical Device On behalf of our client, one of the world's largest biotech companies, we are looking for an Electronics Engineer Robotics. The perfect candidate should have experience with robotic solutions (preferably OMRON robots) and would have a broad interest in multi-disciplinary areas like electronics, robotics, mechanical engineering as well as experience . The perfect candidate: Team player with excellent communication skills Broad interest in multi-disciplinary areas like electronics, robotics, lab workflows, mechanical engineering, physics etc. Willingness to challenge and assess ideas, results and solutions, ability to compromise combined with persuasiveness Autonomous working style, open-minded towards new methods and topics and act as a mentor to emerging engineers Tasks & Responsibilities Be the subject matter expert for the assigned area of responsibility that requires understanding of workflows in a laboratory environment to solve challenges, increase effectiveness and quality. Bring in your ideas and experience in electronics from mixed/analogue and digital circuit design and layout up to system level in a multidisciplinary team Create, adapt, and optimize electrical/electronic architectures and technical specifications for modules and components in diagnostic laboratory automation systems or experimental breadboards. Conduct analyses, technical calculations and simulations of electrical circuits and work according to quality standards and safety guidelines in medical engineering. Compile, document and present findings, insights and proposals linked to technical and business impact(s) Must Haves: Master from an Applied Science or Technical University in the fields of Electrical Engineering or similar with professional experience Experience with robotic solutions (eg OMRON robots) Experience in electronics design, using EDA software and programming of Embedded systems Experience in programming (eg C, C++, Python,), data processing and system simulation Skills: C C++ Python OMRON Robotics Job Title: Electronics Engineer Robotics Location: Zug, Switzerland Job Type: Contract TEKsystems, an Allegis Group company. Allegis Group AG, Aeschengraben 20, CH-4051 Basel, Switzerland. Registration No. CHE-101.865.121. TEKsystems is a company within the Allegis Group network of companies (collectively referred to as "Allegis Group"). Aerotek, Aston Carter, EASi, TEKsystems, Stamford Consultants and The Stamford Group are Allegis Group brands. If you apply, your personal data will be processed as described in the Allegis Group Online Privacy Notice available at our website. To access our Online Privacy Notice, which explains what information we may collect, use, share, and store about you, and describes your rights and choices about this, please go our website. We are part of a global network of companies and as a result, the personal data you provide will be shared within Allegis Group and transferred and processed outside the UK, Switzerland and European Economic Area subject to the protections described in the Allegis Group Online Privacy Notice. We store personal data in the UK, EEA, Switzerland and the USA. If you would like to exercise your privacy rights, please visit the "Contacting Us" section of our Online Privacy Notice on our website for details on how to contact us. To protect your privacy and security, we may take steps to verify your identity, such as a password and user ID if there is an account associated with your request, or identifying information such as your address or date of birth, before proceeding with your request. commitments under the UK Data Protection Act, EU-U.S. Privacy Shield or the Swiss-U.S. Privacy Shield.