MERITUS are recruiting for an Electronics Engineer to join our client's client's Calibration & Maintenance team on their site in Bolton for an initial period of 12 months. ELECTRONICS ENGINEER - INSIDE IR35 - £35 PER Hour client's - 12 MONTHS - MUST BE SC CLEARABLE - BOLTON - SINGLE STAGE INTERVIEW PROCESS We are seeking an Electronics Engineer to join our client's Calibration & Maintenance Team, to service Electrical and Electronic Test Equipment, including Special to Type Test Equipment (STTE). These tasks include fault finding and repair of test equipment, supporting routine calibrations, commissioning of Test Equipment and drift analysis. You will be working within an experienced team of Calibration & Maintenance Engineers supporting complex test platforms in the manufacture and test of complex missile systems. You will be trained to calibrate and support special to type factory test equipment using a range of technologies, DC to Microwave. What we're looking for from you: Minimum qualification: HNC/HND in Electrical & Electronics Engineering. Experience and knowledge in the calibration of test equipment and maintenance of test systems to component level. Able to utilise instructions, handbooks, drawings or specifications to provide technical advice/guidance. Able to use this information to conduct appropriate measurements and repairs down to component level. Good understanding of calibration principles and processes. Able to mentor other or more junior staff when requested by line manager. Able to deal with multiple issues, tasks and priorities concurrently. Analytical and problem solving skills. Good communication skills with the ability to tailor communication to the relevant audience. A good understanding of SAP would be desirable. Experience of working on Environmental Chambers an advantage.
27/09/2024
Project-based
MERITUS are recruiting for an Electronics Engineer to join our client's client's Calibration & Maintenance team on their site in Bolton for an initial period of 12 months. ELECTRONICS ENGINEER - INSIDE IR35 - £35 PER Hour client's - 12 MONTHS - MUST BE SC CLEARABLE - BOLTON - SINGLE STAGE INTERVIEW PROCESS We are seeking an Electronics Engineer to join our client's Calibration & Maintenance Team, to service Electrical and Electronic Test Equipment, including Special to Type Test Equipment (STTE). These tasks include fault finding and repair of test equipment, supporting routine calibrations, commissioning of Test Equipment and drift analysis. You will be working within an experienced team of Calibration & Maintenance Engineers supporting complex test platforms in the manufacture and test of complex missile systems. You will be trained to calibrate and support special to type factory test equipment using a range of technologies, DC to Microwave. What we're looking for from you: Minimum qualification: HNC/HND in Electrical & Electronics Engineering. Experience and knowledge in the calibration of test equipment and maintenance of test systems to component level. Able to utilise instructions, handbooks, drawings or specifications to provide technical advice/guidance. Able to use this information to conduct appropriate measurements and repairs down to component level. Good understanding of calibration principles and processes. Able to mentor other or more junior staff when requested by line manager. Able to deal with multiple issues, tasks and priorities concurrently. Analytical and problem solving skills. Good communication skills with the ability to tailor communication to the relevant audience. A good understanding of SAP would be desirable. Experience of working on Environmental Chambers an advantage.
Senior Electrical Engineer (m/f/d) - electrical Engineering/ECAD/C/Matlab/Python Project: For our client, a large pharmaceutical company in Basel, we are looking for an Senior Electrical Engineer (m/f/d). Background: The Customer Segment Molecular Lab within Roche Diagnostics Solutions develops innovative tests based on the Nobel Prize-winning discovery of the polymerase chain reaction (PCR) as well as Sequencing Solutions. The tests developed by this business area for oncology, virology, HPV, microbiology and for screening blood products are used around the world by researchers, doctors, patients, hospitals, laboratories and blood banks. The Chapter PCR Hardware Development within this Customer Segment develops and maintains the instrument hardware and its mechatronic units for the integration into the diagnostic systems. To strengthen our capabilities for the future, we are looking for an experienced electrical engineer. The perfect candidate has a Bachelor or master's degree in electrical engineering and at least 3 years of experience in similar a role in an R&D organization at Roche Diagnostics. Deep knowledge in electrical engineering is required as well as experience in ECAD Systems, programming language C and in Matlab or Python. Tasks & Responsibilities: * Collaborate in a diverse and interdisciplinary team of electronics, mechanics, optics and software experts participate in defining work packages, their effort estimation, planning and implementation within the development team * Execute work packages with respect to budget, timeline, scope and quality * Develop PCBAs, firmware, wirings and cables for diagnostic systems (eCAD, Microcontroller programming) based on technical requirements including design verification and maintenance * Write or contribute to concepts and specifications, risk management, verification and validation as well as technical investigations. * Analyze technical problems and elaborate solution proposals * Support product hand-over from development to production towards launch and beyond * Co-author relevant documentation based on the development process Must Haves: * Bachelor or master's degree in electrical engineering or similar (FH/ETH/university) * Minimum 3 years of experience in similar role in an R&D organization at Roche Diagnostics * Deep knowledge in electrical engineering (analog and digital circuits, Microcontroller programming) * Experienced in ECAD Systems (eg Mentor Xpedition) and programming language C. * Experienced in Matlab or Python programming * Profound understanding of mechatronic systems and typical design trade-offs * Collaborative and efficient communicator as well as effective presentation skills * Proactive problem solver committed to continuous improvement and innovation * Team- and customer oriented mindset * Fluent in English, German is a strong asset Reference-Nr.: 923673SDA Role: Senior Electrical Engineer (m/w/d) Industry: Pharma Location: Rotkreuz Workload: 100% Start: 01.11.2024 Duration: 12 months (extension is possible) Deadline: 02.10.2024 If you are interested in this position, please send us your complete dossier via the link in this advertisement. About us: ITech Consult is an ISO 9001:2015 certified Swiss company with offices in Germany and Ireland. ITech Consult specialises in the placement of highly qualified candidates for recruitment in the fields of IT, Life Science & Engineering. We offer staff leasing & payroll services. For our candidates this is free of charge, also for Payroll we do not charge you any additional fees.
26/09/2024
Project-based
Senior Electrical Engineer (m/f/d) - electrical Engineering/ECAD/C/Matlab/Python Project: For our client, a large pharmaceutical company in Basel, we are looking for an Senior Electrical Engineer (m/f/d). Background: The Customer Segment Molecular Lab within Roche Diagnostics Solutions develops innovative tests based on the Nobel Prize-winning discovery of the polymerase chain reaction (PCR) as well as Sequencing Solutions. The tests developed by this business area for oncology, virology, HPV, microbiology and for screening blood products are used around the world by researchers, doctors, patients, hospitals, laboratories and blood banks. The Chapter PCR Hardware Development within this Customer Segment develops and maintains the instrument hardware and its mechatronic units for the integration into the diagnostic systems. To strengthen our capabilities for the future, we are looking for an experienced electrical engineer. The perfect candidate has a Bachelor or master's degree in electrical engineering and at least 3 years of experience in similar a role in an R&D organization at Roche Diagnostics. Deep knowledge in electrical engineering is required as well as experience in ECAD Systems, programming language C and in Matlab or Python. Tasks & Responsibilities: * Collaborate in a diverse and interdisciplinary team of electronics, mechanics, optics and software experts participate in defining work packages, their effort estimation, planning and implementation within the development team * Execute work packages with respect to budget, timeline, scope and quality * Develop PCBAs, firmware, wirings and cables for diagnostic systems (eCAD, Microcontroller programming) based on technical requirements including design verification and maintenance * Write or contribute to concepts and specifications, risk management, verification and validation as well as technical investigations. * Analyze technical problems and elaborate solution proposals * Support product hand-over from development to production towards launch and beyond * Co-author relevant documentation based on the development process Must Haves: * Bachelor or master's degree in electrical engineering or similar (FH/ETH/university) * Minimum 3 years of experience in similar role in an R&D organization at Roche Diagnostics * Deep knowledge in electrical engineering (analog and digital circuits, Microcontroller programming) * Experienced in ECAD Systems (eg Mentor Xpedition) and programming language C. * Experienced in Matlab or Python programming * Profound understanding of mechatronic systems and typical design trade-offs * Collaborative and efficient communicator as well as effective presentation skills * Proactive problem solver committed to continuous improvement and innovation * Team- and customer oriented mindset * Fluent in English, German is a strong asset Reference-Nr.: 923673SDA Role: Senior Electrical Engineer (m/w/d) Industry: Pharma Location: Rotkreuz Workload: 100% Start: 01.11.2024 Duration: 12 months (extension is possible) Deadline: 02.10.2024 If you are interested in this position, please send us your complete dossier via the link in this advertisement. About us: ITech Consult is an ISO 9001:2015 certified Swiss company with offices in Germany and Ireland. ITech Consult specialises in the placement of highly qualified candidates for recruitment in the fields of IT, Life Science & Engineering. We offer staff leasing & payroll services. For our candidates this is free of charge, also for Payroll we do not charge you any additional fees.
Description: The perfect candidate has a Bachelor or master's degree in electrical engineering and at least 3 years of experience in similar a role in an R&D organization. Deep knowledge in electrical engineering is required as well as experience in ECAD Systems, programming language C and in Matlab or Python. Tasks & Responsibilities: Collaborate in a diverse and interdisciplinary team of electronics, mechanics, optics and software experts participate in defining work packages, their effort estimation, planning and implementation within the development team Execute work packages with respect to budget, timeline, scope and quality Develop PCBAs, firmware, wirings and cables for diagnostic systems (eCAD, Microcontroller programming) based on technical requirements including design verification and maintenance Write or contribute to concepts and specifications, risk management, verification and validation as well as technical investigations. Analyze technical problems and elaborate solution proposals Support product hand-over from development to production towards launch and beyond Co-author relevant documentation based on the development process Must Haves: * Bachelor or master's degree in electrical engineering or similar (FH/ETH/university) * Minimum 3 years of experience in similar role in an R&D organization at Roche Diagnostics. * Deep knowledge in electrical engineering (analog and digital circuits, Microcontroller programming). * Experienced in ECAD Systems (eg Mentor Xpedition) and programming language C. * Experienced in Matlab or Python programming. * Profound understanding of mechatronic systems and typical design trade-offs. * Collaborative and efficient communicator as well as effective presentation skills * Proactive problem solver committed to continuous improvement and innovation * Team- and customer oriented mindset * Fluent in English, German is a strong asset Skills: C Python software engineering ECAD Mentor xpedition Matlab electrical engineering analog circuit digital circuits Microcontroller regulated environment mechatronics German Employee Value Proposition: Excellent opportunity to join one of the worlds largest biotech companies, within a Customer Segment Molecular Lab working with Nobel Prize-winning teams on the discovery of the polymerase chain reaction (PCR). Job Title: Senior Electrical Engineer Location: Zug, Switzerland Job Type: Contract TEKsystems, an Allegis Group company. Allegis Group AG, Aeschengraben 20, CH-4051 Basel, Switzerland. Registration No. CHE-101.865.121. TEKsystems is a company within the Allegis Group network of companies (collectively referred to as "Allegis Group"). Aerotek, Aston Carter, EASi, TEKsystems, Stamford Consultants and The Stamford Group are Allegis Group brands. If you apply, your personal data will be processed as described in the Allegis Group Online Privacy Notice available at our website. To access our Online Privacy Notice, which explains what information we may collect, use, share, and store about you, and describes your rights and choices about this, please go our website. We are part of a global network of companies and as a result, the personal data you provide will be shared within Allegis Group and transferred and processed outside the UK, Switzerland and European Economic Area subject to the protections described in the Allegis Group Online Privacy Notice. We store personal data in the UK, EEA, Switzerland and the USA. If you would like to exercise your privacy rights, please visit the "Contacting Us" section of our Online Privacy Notice on our website for details on how to contact us. To protect your privacy and security, we may take steps to verify your identity, such as a password and user ID if there is an account associated with your request, or identifying information such as your address or date of birth, before proceeding with your request. commitments under the UK Data Protection Act, EU-U.S. Privacy Shield or the Swiss-U.S. Privacy Shield.
26/09/2024
Project-based
Description: The perfect candidate has a Bachelor or master's degree in electrical engineering and at least 3 years of experience in similar a role in an R&D organization. Deep knowledge in electrical engineering is required as well as experience in ECAD Systems, programming language C and in Matlab or Python. Tasks & Responsibilities: Collaborate in a diverse and interdisciplinary team of electronics, mechanics, optics and software experts participate in defining work packages, their effort estimation, planning and implementation within the development team Execute work packages with respect to budget, timeline, scope and quality Develop PCBAs, firmware, wirings and cables for diagnostic systems (eCAD, Microcontroller programming) based on technical requirements including design verification and maintenance Write or contribute to concepts and specifications, risk management, verification and validation as well as technical investigations. Analyze technical problems and elaborate solution proposals Support product hand-over from development to production towards launch and beyond Co-author relevant documentation based on the development process Must Haves: * Bachelor or master's degree in electrical engineering or similar (FH/ETH/university) * Minimum 3 years of experience in similar role in an R&D organization at Roche Diagnostics. * Deep knowledge in electrical engineering (analog and digital circuits, Microcontroller programming). * Experienced in ECAD Systems (eg Mentor Xpedition) and programming language C. * Experienced in Matlab or Python programming. * Profound understanding of mechatronic systems and typical design trade-offs. * Collaborative and efficient communicator as well as effective presentation skills * Proactive problem solver committed to continuous improvement and innovation * Team- and customer oriented mindset * Fluent in English, German is a strong asset Skills: C Python software engineering ECAD Mentor xpedition Matlab electrical engineering analog circuit digital circuits Microcontroller regulated environment mechatronics German Employee Value Proposition: Excellent opportunity to join one of the worlds largest biotech companies, within a Customer Segment Molecular Lab working with Nobel Prize-winning teams on the discovery of the polymerase chain reaction (PCR). Job Title: Senior Electrical Engineer Location: Zug, Switzerland Job Type: Contract TEKsystems, an Allegis Group company. Allegis Group AG, Aeschengraben 20, CH-4051 Basel, Switzerland. Registration No. CHE-101.865.121. TEKsystems is a company within the Allegis Group network of companies (collectively referred to as "Allegis Group"). Aerotek, Aston Carter, EASi, TEKsystems, Stamford Consultants and The Stamford Group are Allegis Group brands. If you apply, your personal data will be processed as described in the Allegis Group Online Privacy Notice available at our website. To access our Online Privacy Notice, which explains what information we may collect, use, share, and store about you, and describes your rights and choices about this, please go our website. We are part of a global network of companies and as a result, the personal data you provide will be shared within Allegis Group and transferred and processed outside the UK, Switzerland and European Economic Area subject to the protections described in the Allegis Group Online Privacy Notice. We store personal data in the UK, EEA, Switzerland and the USA. If you would like to exercise your privacy rights, please visit the "Contacting Us" section of our Online Privacy Notice on our website for details on how to contact us. To protect your privacy and security, we may take steps to verify your identity, such as a password and user ID if there is an account associated with your request, or identifying information such as your address or date of birth, before proceeding with your request. commitments under the UK Data Protection Act, EU-U.S. Privacy Shield or the Swiss-U.S. Privacy Shield.
Senior Electronics Design Engineer Lynx Recruitment is working with a leading optics and photonics company, to recruit a Senior Electronic Systems Engineer to join their team in St Asaph, North Wales. Key Responsibilities: Lead the design of electronic sub-systems, including requirements analysis and specification development Design of Laser drivers, optical detection circuits, and digital control electronics Produce and maintain Embedded firmware/software for digital control of opto-electronic sub-systems Perform reliability and parts stress analysis, and manage obsolescence Support new business opportunities and generate solutions for customers Assist with the gate review and handover process from design to production Requirements: Industrial experience in an electronics design and development function Strong analog/digital/mixed signal circuit design skills Experience in firmware/software development for ARM-based microcontrollers Proficient in schematic capture and PCB layout (eg, Altium) Experience with prototyping and laboratory test equipment Bachelor's degree in Electrical and/or Electronics Engineering Benefits: Competitive salary up to £70k Hybrid work model - 2 days WFH 25 days holiday plus bank holidays Company pension (6% contribution) Company bonus scheme Health Cash Plan SAYE Scheme
25/09/2024
Full time
Senior Electronics Design Engineer Lynx Recruitment is working with a leading optics and photonics company, to recruit a Senior Electronic Systems Engineer to join their team in St Asaph, North Wales. Key Responsibilities: Lead the design of electronic sub-systems, including requirements analysis and specification development Design of Laser drivers, optical detection circuits, and digital control electronics Produce and maintain Embedded firmware/software for digital control of opto-electronic sub-systems Perform reliability and parts stress analysis, and manage obsolescence Support new business opportunities and generate solutions for customers Assist with the gate review and handover process from design to production Requirements: Industrial experience in an electronics design and development function Strong analog/digital/mixed signal circuit design skills Experience in firmware/software development for ARM-based microcontrollers Proficient in schematic capture and PCB layout (eg, Altium) Experience with prototyping and laboratory test equipment Bachelor's degree in Electrical and/or Electronics Engineering Benefits: Competitive salary up to £70k Hybrid work model - 2 days WFH 25 days holiday plus bank holidays Company pension (6% contribution) Company bonus scheme Health Cash Plan SAYE Scheme
Senior Electronic Design Engineer Lynx Recruitment is working with a leading optics and photonics company, to recruit a Senior Electronics Design Engineer to join their team in Torquay. Key Responsibilities: Electronic design engineering from concept to manufacture and test Lead the design of electronic sub-systems, including requirements analysis and specification development Design of Laser drivers, optical detection circuits, and digital control electronics Produce and maintain Embedded firmware/software for digital control of opto-electronic sub-systems Perform reliability and parts stress analysis, and manage obsolescence Support new business opportunities and generate solutions for customers Assist with the gate review and handover process from design to production Requirements: Industrial experience in an electronics design and development function Strong analog/digital/mixed signal circuit design skills Experience in firmware/software development for ARM-based microcontrollers Proficient in schematic capture and PCB layout (eg, Altium) Experience with prototyping and laboratory test equipment Bachelor's degree in Electrical and/or Electronics Engineering Benefits: Hybrid work model - 2 days WFH each week 25 days holiday plus bank holidays Company pension (6% contribution) Company bonus scheme Health Cash Plan SAYE Scheme
25/09/2024
Full time
Senior Electronic Design Engineer Lynx Recruitment is working with a leading optics and photonics company, to recruit a Senior Electronics Design Engineer to join their team in Torquay. Key Responsibilities: Electronic design engineering from concept to manufacture and test Lead the design of electronic sub-systems, including requirements analysis and specification development Design of Laser drivers, optical detection circuits, and digital control electronics Produce and maintain Embedded firmware/software for digital control of opto-electronic sub-systems Perform reliability and parts stress analysis, and manage obsolescence Support new business opportunities and generate solutions for customers Assist with the gate review and handover process from design to production Requirements: Industrial experience in an electronics design and development function Strong analog/digital/mixed signal circuit design skills Experience in firmware/software development for ARM-based microcontrollers Proficient in schematic capture and PCB layout (eg, Altium) Experience with prototyping and laboratory test equipment Bachelor's degree in Electrical and/or Electronics Engineering Benefits: Hybrid work model - 2 days WFH each week 25 days holiday plus bank holidays Company pension (6% contribution) Company bonus scheme Health Cash Plan SAYE Scheme
Senior Hardware Engineer - Ashford, Kent Join our client as a Senior Hardware Engineer and contribute to the development of cutting-edge life science and medical products that will have a positive impact on the world. Based at their offices in Ashford, Kent, this is an exceptional opportunity. Key Responsibilities: Digital/analogue electronics and firmware design of products from concept through to production, with a focus on FPGA and VHDL System architectural design and concepts Schematic and board layout using Altium Designer CAD tool Prototype build, test, and fault-finding Specification and requirements capture EMC and electrical safety compliance support Cost model generation, RoHS analysis, and compilation Possible oversight of junior engineers Ideal Candidate Profile: Demonstrable experience in digital and analogue design Embedded programming expertise in C, FPGA VHDL, and advantageous experience in C++, .NET, C#, Java, or Python Familiarity with CAD tools, such as Altium, for schematic capture and PCB layout Some exposure to EMC compliance design techniques and knowledge of safety and EMC standards Clear and concise report writing with good attention to detail Competency with Microsoft Office products Willing to take on tasks as deemed necessary for the project Good presentation and communication skills Ideally 8+ years of design experience, though exceptional candidates with lower experience will be considered Benefits: Remote work, 2 days per week 8% non-contributory pension (You contribute £0) 25 days annual leave, plus 8 bank holidays Simply Health medical cover Life insurance Early finish Fridays SAYE scheme Cycle to work scheme Apply now for immediate consideration!
25/09/2024
Full time
Senior Hardware Engineer - Ashford, Kent Join our client as a Senior Hardware Engineer and contribute to the development of cutting-edge life science and medical products that will have a positive impact on the world. Based at their offices in Ashford, Kent, this is an exceptional opportunity. Key Responsibilities: Digital/analogue electronics and firmware design of products from concept through to production, with a focus on FPGA and VHDL System architectural design and concepts Schematic and board layout using Altium Designer CAD tool Prototype build, test, and fault-finding Specification and requirements capture EMC and electrical safety compliance support Cost model generation, RoHS analysis, and compilation Possible oversight of junior engineers Ideal Candidate Profile: Demonstrable experience in digital and analogue design Embedded programming expertise in C, FPGA VHDL, and advantageous experience in C++, .NET, C#, Java, or Python Familiarity with CAD tools, such as Altium, for schematic capture and PCB layout Some exposure to EMC compliance design techniques and knowledge of safety and EMC standards Clear and concise report writing with good attention to detail Competency with Microsoft Office products Willing to take on tasks as deemed necessary for the project Good presentation and communication skills Ideally 8+ years of design experience, though exceptional candidates with lower experience will be considered Benefits: Remote work, 2 days per week 8% non-contributory pension (You contribute £0) 25 days annual leave, plus 8 bank holidays Simply Health medical cover Life insurance Early finish Fridays SAYE scheme Cycle to work scheme Apply now for immediate consideration!
Senior Manufacturing Engineer Rochester, Kent (100% on-site role) £40,000 - £50,000 depending on skills and experience As a Manufacturing Engineer, you will play a pivotal role in supporting the manufacture of current and future products across our entire product range and the full programme life cycle. Working closely with stakeholders across Manufacturing and Engineering you will use your knowledge and experiences to support our manufacturing systems and processes during initial bid, new product introduction, production and repair to ultimately ensure product quality is met within schedule and budget targets. What you'll be doing: Working within our Manufacturing Engineering team to support programmes across the full life cycle Creating and improving processes and procedures to ensure efficient and effective manufacture of our products, including the use of PDM, ERP & MES tools to create assembly build instructions Designing and implementing jigs, tools and fixtures to ease the assembly of product by our Technician Developing and maintaining shop floor manufacturing lines, cells and equipment to provide a safe and lean manufacturing environment Process mapping, cell layouts, TAKT time calculations, lean thinking, visual management, business case justifications and working with key stakeholders to support a new factory setup Reviewing build times & support activity durations, estimating future targets and working to improve processes to achieve production goals according to product specifications and business requirements Working to establish a strong Lean culture and leading continuous improvement initiatives to support strategic objectives such as the adoption of Industry 4.0 digital manufacturing Your skills and experiences: Essential: Qualification in a relevant engineering discipline or time served in a similar role (HNC/Degree) Knowledge and understanding of modern Manufacturing Engineering practices, tools and technology gained from experience working in a manufacturing environment Experience in interpreting engineering drawings to create manufacturing assembly instructions/standard operating procedures Desirable: Demonstrable success in utilising Lean manufacturing tools and techniques in the context of process improvement, cost savings or waste elimination Experience in the application of Continuous Improvement and Root Cause & Corrective Action tools and techniques such as 5Y, 8D, PDCA, FMEA, fish bone and TPM Experience gained within an electronics or electro-mechanical environment would be highly advantageous
25/09/2024
Full time
Senior Manufacturing Engineer Rochester, Kent (100% on-site role) £40,000 - £50,000 depending on skills and experience As a Manufacturing Engineer, you will play a pivotal role in supporting the manufacture of current and future products across our entire product range and the full programme life cycle. Working closely with stakeholders across Manufacturing and Engineering you will use your knowledge and experiences to support our manufacturing systems and processes during initial bid, new product introduction, production and repair to ultimately ensure product quality is met within schedule and budget targets. What you'll be doing: Working within our Manufacturing Engineering team to support programmes across the full life cycle Creating and improving processes and procedures to ensure efficient and effective manufacture of our products, including the use of PDM, ERP & MES tools to create assembly build instructions Designing and implementing jigs, tools and fixtures to ease the assembly of product by our Technician Developing and maintaining shop floor manufacturing lines, cells and equipment to provide a safe and lean manufacturing environment Process mapping, cell layouts, TAKT time calculations, lean thinking, visual management, business case justifications and working with key stakeholders to support a new factory setup Reviewing build times & support activity durations, estimating future targets and working to improve processes to achieve production goals according to product specifications and business requirements Working to establish a strong Lean culture and leading continuous improvement initiatives to support strategic objectives such as the adoption of Industry 4.0 digital manufacturing Your skills and experiences: Essential: Qualification in a relevant engineering discipline or time served in a similar role (HNC/Degree) Knowledge and understanding of modern Manufacturing Engineering practices, tools and technology gained from experience working in a manufacturing environment Experience in interpreting engineering drawings to create manufacturing assembly instructions/standard operating procedures Desirable: Demonstrable success in utilising Lean manufacturing tools and techniques in the context of process improvement, cost savings or waste elimination Experience in the application of Continuous Improvement and Root Cause & Corrective Action tools and techniques such as 5Y, 8D, PDCA, FMEA, fish bone and TPM Experience gained within an electronics or electro-mechanical environment would be highly advantageous