Job Summary: Provide technical support in the Engineering Services department for the Salem Power Uprate Project. The successful candidate will perform the duties as a System/Commissioning Engineer for the power uprate for Salem Units 1 and 2. The engineer is responsible for sponsoring and implementing power uprate modifications. Job Responsibilities: • Assess the required scope of work and explore various alternative solutions for required modifications. • Sponsor and guide plant modifications through the approval process. • Fulfill the role of the system lead engineer for modifications. • Ensure proper systems integration and act as the subject matter expert for plant systems. • Support changes to the Preventive maintenance and Surveillance Program. • Identify Critical Spare parts. • Support Operations and Maintenance technical procedural changes. • Prepare and/or support factory and plant startup testing. • Collaborate with Project Manager to ensure that Engineering deliverables meet the overall project goals. • Provide field support during modification walkdowns, installation, testing and as-built verification. • Comply with regulatory requirements including 50.59, License Amendment Request preparation and any required supporting analysis. • Perform other assigned duties as determined by the Electrical Design Engineering Manager. • Participate in the Emergency Response Organization. Job Specific Qualifications Required: • BS Degree in Electrical, Mechanical, Civil, Controls or related Engineering or related technical degree. • 13 years of experience performing Engineering work in a nuclear power plant or related industry. • Minimum of 7 years of experience in controls system engineering. • Experience with power plant infrastructure facilities, power distribution. • Experience with level and flow systems. • Must have Westinghouse or Emerson controls systems experience. • Availability for shift work during installation. • Must meet Nuclear requirements for unescorted plant access. • Must possess a valid US driver's license and maintain a satisfactory driving record. Desired: • Power uprate experience at a pressurized water reactor (PWR) • Prior Design Engineering configuration control qualification • Professional Engineering license (NJ or other state)
20/09/2024
Full time
Job Summary: Provide technical support in the Engineering Services department for the Salem Power Uprate Project. The successful candidate will perform the duties as a System/Commissioning Engineer for the power uprate for Salem Units 1 and 2. The engineer is responsible for sponsoring and implementing power uprate modifications. Job Responsibilities: • Assess the required scope of work and explore various alternative solutions for required modifications. • Sponsor and guide plant modifications through the approval process. • Fulfill the role of the system lead engineer for modifications. • Ensure proper systems integration and act as the subject matter expert for plant systems. • Support changes to the Preventive maintenance and Surveillance Program. • Identify Critical Spare parts. • Support Operations and Maintenance technical procedural changes. • Prepare and/or support factory and plant startup testing. • Collaborate with Project Manager to ensure that Engineering deliverables meet the overall project goals. • Provide field support during modification walkdowns, installation, testing and as-built verification. • Comply with regulatory requirements including 50.59, License Amendment Request preparation and any required supporting analysis. • Perform other assigned duties as determined by the Electrical Design Engineering Manager. • Participate in the Emergency Response Organization. Job Specific Qualifications Required: • BS Degree in Electrical, Mechanical, Civil, Controls or related Engineering or related technical degree. • 13 years of experience performing Engineering work in a nuclear power plant or related industry. • Minimum of 7 years of experience in controls system engineering. • Experience with power plant infrastructure facilities, power distribution. • Experience with level and flow systems. • Must have Westinghouse or Emerson controls systems experience. • Availability for shift work during installation. • Must meet Nuclear requirements for unescorted plant access. • Must possess a valid US driver's license and maintain a satisfactory driving record. Desired: • Power uprate experience at a pressurized water reactor (PWR) • Prior Design Engineering configuration control qualification • Professional Engineering license (NJ or other state)
Role: Senior Project Engineer Digital/Non Digital: Non Digital Contract Length: 18-months Location: Annan - 4 day week. May consider 1 day working from home once fully trained. IR35: In Scope Client qualify for GIS: Yes - Disability Confident Scheme Description: Identify project functional requirements and stakeholder needs for assigned project. Manage engineering support to the project. Contribute to production of Project Execution Plans including design, safety case and commissioning strategies. Support project optioneering process. Develop concept design and fit for purpose engineering solution for projects. Produce and/or approve project technical specifications. Manage detailed design activities in accordance with design authority standards. Prepare modification proposals as required, acting as Nominated Responsible Engineer where appointed. Carry out technical assessment/approval of contractors work instruction/method statements/risk assessments. Provide technical supervision of construction/deconstruction activities to ensure compliance with design intent. Approve as built drawings. Specify and provide technical supervision of commissioning and/or decommissioning Manage hand over to systems/operations ensuring that all drawings, instructions and training have been supplied as required. Liaise and consult with system engineer and other stakeholders throughout project life cycle to ensure efficient and effective project delivery. Maintain site configuration control throughout project lifecycle. Comply with all Environment, Health, Safety, Security and Quality policies, procedures, work instructions and risk assessments and support the continuous improvement of Health, Safety, Environment and Quality on Site. As a customer-focused individual, the post holder will be expected to support delivery within his or her range of skills, knowledge, experience and competence. Review on-site and off-site events and root cause analysis to promote improved working practices. The post holder may be required to undertake delegated responsibility for the Design Authority and act as a site intelligent customer. Contribute to the effective development and delivery of training within own area of specialism. Deputise for Section Head when required. The post holder may be required to undertake emergency scheme duties You'll have relevant experience in: Electrical, Instrument and Control (EC&I) experience on industrial plants Significant experience of nuclear and/or conventional project engineering Fault finding Testing Our role in supporting diversity and inclusion As an international workforce business, we are committed to sourcing personnel that reflects the diversity and values of our client base but also that of Orion Group. We welcome the wide range of experiences and viewpoints that potential workers bring to our business and our clients, including those based on nationality, gender, culture, educational and professional backgrounds, race, ethnicity, sexual orientation, gender identity and expression, disability, and age differences, job classification and religion. In our inclusive workplace, regardless of your employment status as staff or contract, everyone is assured the right of equitable, fair and respectful treatment.
20/09/2024
Project-based
Role: Senior Project Engineer Digital/Non Digital: Non Digital Contract Length: 18-months Location: Annan - 4 day week. May consider 1 day working from home once fully trained. IR35: In Scope Client qualify for GIS: Yes - Disability Confident Scheme Description: Identify project functional requirements and stakeholder needs for assigned project. Manage engineering support to the project. Contribute to production of Project Execution Plans including design, safety case and commissioning strategies. Support project optioneering process. Develop concept design and fit for purpose engineering solution for projects. Produce and/or approve project technical specifications. Manage detailed design activities in accordance with design authority standards. Prepare modification proposals as required, acting as Nominated Responsible Engineer where appointed. Carry out technical assessment/approval of contractors work instruction/method statements/risk assessments. Provide technical supervision of construction/deconstruction activities to ensure compliance with design intent. Approve as built drawings. Specify and provide technical supervision of commissioning and/or decommissioning Manage hand over to systems/operations ensuring that all drawings, instructions and training have been supplied as required. Liaise and consult with system engineer and other stakeholders throughout project life cycle to ensure efficient and effective project delivery. Maintain site configuration control throughout project lifecycle. Comply with all Environment, Health, Safety, Security and Quality policies, procedures, work instructions and risk assessments and support the continuous improvement of Health, Safety, Environment and Quality on Site. As a customer-focused individual, the post holder will be expected to support delivery within his or her range of skills, knowledge, experience and competence. Review on-site and off-site events and root cause analysis to promote improved working practices. The post holder may be required to undertake delegated responsibility for the Design Authority and act as a site intelligent customer. Contribute to the effective development and delivery of training within own area of specialism. Deputise for Section Head when required. The post holder may be required to undertake emergency scheme duties You'll have relevant experience in: Electrical, Instrument and Control (EC&I) experience on industrial plants Significant experience of nuclear and/or conventional project engineering Fault finding Testing Our role in supporting diversity and inclusion As an international workforce business, we are committed to sourcing personnel that reflects the diversity and values of our client base but also that of Orion Group. We welcome the wide range of experiences and viewpoints that potential workers bring to our business and our clients, including those based on nationality, gender, culture, educational and professional backgrounds, race, ethnicity, sexual orientation, gender identity and expression, disability, and age differences, job classification and religion. In our inclusive workplace, regardless of your employment status as staff or contract, everyone is assured the right of equitable, fair and respectful treatment.
The UK's nuclear sector is looking to bring on a skilled Senior Project Engineer who has vast knowledge in the nuclear sector and wants to join one of the best projects in the UK. Job Title - Senior Project Engineer Location - Annan (4 day a week role) Contract Length - 18 Months Pay Rates - £46.85 per hour Umbrella Key Skills: Identify the projects functional requirements and needs of the stakeholders Work with the team to produce project execution plans including design, safety case and commissioning strategies Support all project optioneering process Develop fit for purpose engineering conceptual designs Carry out technical assessment/approval of contractors work instruction/method Manage hand over to systems/operations ensuring that all drawings, instructions and training have been supplied as required Prepare modification proposals as required, acting as Nominated Responsible Engineer where Provide technical supervision of construction/deconstruction activities to ensure compliance with design intent Key Qualifications Experiences: Electrical, Instrument and Control (EC&I) experience on industrial plants Significant experience of nuclear and/or conventional project engineering Fault finding Testing
20/09/2024
Project-based
The UK's nuclear sector is looking to bring on a skilled Senior Project Engineer who has vast knowledge in the nuclear sector and wants to join one of the best projects in the UK. Job Title - Senior Project Engineer Location - Annan (4 day a week role) Contract Length - 18 Months Pay Rates - £46.85 per hour Umbrella Key Skills: Identify the projects functional requirements and needs of the stakeholders Work with the team to produce project execution plans including design, safety case and commissioning strategies Support all project optioneering process Develop fit for purpose engineering conceptual designs Carry out technical assessment/approval of contractors work instruction/method Manage hand over to systems/operations ensuring that all drawings, instructions and training have been supplied as required Prepare modification proposals as required, acting as Nominated Responsible Engineer where Provide technical supervision of construction/deconstruction activities to ensure compliance with design intent Key Qualifications Experiences: Electrical, Instrument and Control (EC&I) experience on industrial plants Significant experience of nuclear and/or conventional project engineering Fault finding Testing
A top UK nuclear company is looking to bring on an experienced E&I Craftsperson to work on some fantastic and exciting opportunities in the nuclear sector. This is a great opportunity to broaden your knowledge and work with some of the best engineers on the best projects in the UK Job Title - E&I Craftsperson Location - Cumbria Contract Length - 12 Months Pay Rates - Up To £35 per hour Key Skills: Work to maintenance instructions and record information accurately Repair, maintain, calibrate and test Radiation Protection Instruments to ensure customer work demands are met Conform to local procedures, rules and working practices to ensure compliance with specified regulatory and customer requirements Identify improvements and innovations in service provision to enhance the efficiency and quality of service provision. Timely implementation of agreed improvements To work safely in accordance with all safety, quality, security, environmental and site instructions and requirements Key Qualifications: Apprenticeship or equivalent training in relevant discipline (e.g. Electronic, Electrical, Instrumentation, Technology fields) 5 GCSE or equivalent (at Grade C or above) including English, a Science subject and Maths at a minimum of Grade B Knowledge and understanding of conventional and nuclear safety (Desirable) Proven experience of servicing electronic instrument systems
20/09/2024
Project-based
A top UK nuclear company is looking to bring on an experienced E&I Craftsperson to work on some fantastic and exciting opportunities in the nuclear sector. This is a great opportunity to broaden your knowledge and work with some of the best engineers on the best projects in the UK Job Title - E&I Craftsperson Location - Cumbria Contract Length - 12 Months Pay Rates - Up To £35 per hour Key Skills: Work to maintenance instructions and record information accurately Repair, maintain, calibrate and test Radiation Protection Instruments to ensure customer work demands are met Conform to local procedures, rules and working practices to ensure compliance with specified regulatory and customer requirements Identify improvements and innovations in service provision to enhance the efficiency and quality of service provision. Timely implementation of agreed improvements To work safely in accordance with all safety, quality, security, environmental and site instructions and requirements Key Qualifications: Apprenticeship or equivalent training in relevant discipline (e.g. Electronic, Electrical, Instrumentation, Technology fields) 5 GCSE or equivalent (at Grade C or above) including English, a Science subject and Maths at a minimum of Grade B Knowledge and understanding of conventional and nuclear safety (Desirable) Proven experience of servicing electronic instrument systems
Senior Electronic Design Engineer Lynx Recruitment is working with a leading optics and photonics company, to recruit a Senior Electronics Design Engineer to join their team in Torquay. Key Responsibilities: Electronic design engineering from concept to manufacture and test Lead the design of electronic sub-systems, including requirements analysis and specification development Design of Laser drivers, optical detection circuits, and digital control electronics Produce and maintain Embedded firmware/software for digital control of opto-electronic sub-systems Perform reliability and parts stress analysis, and manage obsolescence Support new business opportunities and generate solutions for customers Assist with the gate review and handover process from design to production Requirements: Industrial experience in an electronics design and development function Strong analog/digital/mixed signal circuit design skills Experience in firmware/software development for ARM-based microcontrollers Proficient in schematic capture and PCB layout (eg, Altium) Experience with prototyping and laboratory test equipment Bachelor's degree in Electrical and/or Electronics Engineering Benefits: Hybrid work model - 2 days WFH each week 25 days holiday plus bank holidays Company pension (6% contribution) Company bonus scheme Health Cash Plan SAYE Scheme
20/09/2024
Full time
Senior Electronic Design Engineer Lynx Recruitment is working with a leading optics and photonics company, to recruit a Senior Electronics Design Engineer to join their team in Torquay. Key Responsibilities: Electronic design engineering from concept to manufacture and test Lead the design of electronic sub-systems, including requirements analysis and specification development Design of Laser drivers, optical detection circuits, and digital control electronics Produce and maintain Embedded firmware/software for digital control of opto-electronic sub-systems Perform reliability and parts stress analysis, and manage obsolescence Support new business opportunities and generate solutions for customers Assist with the gate review and handover process from design to production Requirements: Industrial experience in an electronics design and development function Strong analog/digital/mixed signal circuit design skills Experience in firmware/software development for ARM-based microcontrollers Proficient in schematic capture and PCB layout (eg, Altium) Experience with prototyping and laboratory test equipment Bachelor's degree in Electrical and/or Electronics Engineering Benefits: Hybrid work model - 2 days WFH each week 25 days holiday plus bank holidays Company pension (6% contribution) Company bonus scheme Health Cash Plan SAYE Scheme
Senior Electronics Design Engineer Lynx Recruitment is working with a leading optics and photonics company, to recruit a Senior Electronic Systems Engineer to join their team in St Asaph, North Wales. Key Responsibilities: Lead the design of electronic sub-systems, including requirements analysis and specification development Design of Laser drivers, optical detection circuits, and digital control electronics Produce and maintain Embedded firmware/software for digital control of opto-electronic sub-systems Perform reliability and parts stress analysis, and manage obsolescence Support new business opportunities and generate solutions for customers Assist with the gate review and handover process from design to production Requirements: Industrial experience in an electronics design and development function Strong analog/digital/mixed signal circuit design skills Experience in firmware/software development for ARM-based microcontrollers Proficient in schematic capture and PCB layout (eg, Altium) Experience with prototyping and laboratory test equipment Bachelor's degree in Electrical and/or Electronics Engineering Benefits: Competitive salary up to £70k Hybrid work model - 2 days WFH 25 days holiday plus bank holidays Company pension (6% contribution) Company bonus scheme Health Cash Plan SAYE Scheme
20/09/2024
Full time
Senior Electronics Design Engineer Lynx Recruitment is working with a leading optics and photonics company, to recruit a Senior Electronic Systems Engineer to join their team in St Asaph, North Wales. Key Responsibilities: Lead the design of electronic sub-systems, including requirements analysis and specification development Design of Laser drivers, optical detection circuits, and digital control electronics Produce and maintain Embedded firmware/software for digital control of opto-electronic sub-systems Perform reliability and parts stress analysis, and manage obsolescence Support new business opportunities and generate solutions for customers Assist with the gate review and handover process from design to production Requirements: Industrial experience in an electronics design and development function Strong analog/digital/mixed signal circuit design skills Experience in firmware/software development for ARM-based microcontrollers Proficient in schematic capture and PCB layout (eg, Altium) Experience with prototyping and laboratory test equipment Bachelor's degree in Electrical and/or Electronics Engineering Benefits: Competitive salary up to £70k Hybrid work model - 2 days WFH 25 days holiday plus bank holidays Company pension (6% contribution) Company bonus scheme Health Cash Plan SAYE Scheme
RF Design Engineer (Power Amplification and Power Supply Units) Location: Bristol, UK (Hybrid) Salary: £60,000 - £90,000 DOE Summary Lynx Recruitment is working with an electronics client in Bristol to recruit a skilled RF Design Engineer to join the team. The successful candidate will focus on the design and development of solid-state power amplification and power supply units for our cutting-edge microwave systems. Key Responsibilities: Design, simulate, and test RF power amplifiers and power supply units using Microwave Office software Optimise designs for performance, efficiency, and reliability Collaborate with cross-functional teams to integrate designs into larger systems Conduct rigorous testing and troubleshoot issues to ensure product quality Stay up-to-date with the latest advancements in RF technology and incorporate them into designs Document design processes, test results, and technical specifications Required Qualifications: Bachelor's or Master's degree in Electrical Engineering, Physics, or a related field (or relevant experience) Minimum of 5 years of experience in RF design, with a focus on power amplification and power supply units Strong proficiency in Microwave Office software Solid understanding of RF theory, microwave circuits, and power electronics Experience with solid-state power amplification design Familiarity with power supply unit design is highly desirable Excellent problem-solving and analytical skills Strong communication and teamwork abilities The company offers a wide salary range of £60,000 - £90,000, depending on experience, and a hybrid work model that balances in-office collaboration with remote work flexibility, alongside an impressive benefits package. If you'd like the opportunity to work on ground-breaking projects and advance your career in a dynamic, innovative environment, please apply now!
20/09/2024
Full time
RF Design Engineer (Power Amplification and Power Supply Units) Location: Bristol, UK (Hybrid) Salary: £60,000 - £90,000 DOE Summary Lynx Recruitment is working with an electronics client in Bristol to recruit a skilled RF Design Engineer to join the team. The successful candidate will focus on the design and development of solid-state power amplification and power supply units for our cutting-edge microwave systems. Key Responsibilities: Design, simulate, and test RF power amplifiers and power supply units using Microwave Office software Optimise designs for performance, efficiency, and reliability Collaborate with cross-functional teams to integrate designs into larger systems Conduct rigorous testing and troubleshoot issues to ensure product quality Stay up-to-date with the latest advancements in RF technology and incorporate them into designs Document design processes, test results, and technical specifications Required Qualifications: Bachelor's or Master's degree in Electrical Engineering, Physics, or a related field (or relevant experience) Minimum of 5 years of experience in RF design, with a focus on power amplification and power supply units Strong proficiency in Microwave Office software Solid understanding of RF theory, microwave circuits, and power electronics Experience with solid-state power amplification design Familiarity with power supply unit design is highly desirable Excellent problem-solving and analytical skills Strong communication and teamwork abilities The company offers a wide salary range of £60,000 - £90,000, depending on experience, and a hybrid work model that balances in-office collaboration with remote work flexibility, alongside an impressive benefits package. If you'd like the opportunity to work on ground-breaking projects and advance your career in a dynamic, innovative environment, please apply now!
We are recruiting for a Satellite AIT Electrical Systems Engineer for a leading Defence & Space organisation based in Stevenage. Role Overview Preparation of test procedures and test sequences for Satellite systems and instrument testing during ambient and environmental test campaigns. Preparing, debugging and executing complex test sequences on flight spacecraft. Writing test reports and supporting test and non-conformance reviews. Responsibilities Designing and performing electrical and functional tests on a variety of subsystems (power, comms, data handling, AOCS, system control and FDIR) on test benches and spacecraft. Writing and executing electrical integration procedures to electrically verify and connect the equipment during the build of the spacecraft. Interpretation of electrical, functional and system test requirements from test specifications Provide test solutions to meet the test specification requirements, from planning and kick-off meeting, through test sequence coding, procedure preparation and debug to execution. Close out tests with Post Test Review and Test Report To provide technical inputs to project test reviews (Test Readiness Reviews, Post Test Reviews, Test Review Boards and Non-Conformance Review Boards) Development and debug of Automatic Test procedures (ATP) Preparing and executing spacecraft system investigations in line with actions from Non-Conformance Review Boards (NRBs). Support Spacecraft systems functional and performance tests during environmental test (Reference test, TVAC, Magnetic, EMC, functional and performance tests). Work to company and departmental procedures including quality and security. Use Digital Design and Manufacturing Systems (DDMS) to prepare and execute work instructions to support the testing. Skill Set Minimum of a degree in an Electrical Engineering related discipline or relevant experience in a similar role >5 years Current hands-on experience of writing test sequences/scripts for execution of spacecraft tests from the Central Checkout System (CCS). Test sequence writing and debugging in a bespoke language (C and Java knowledge would be an advantage) Competent in the use of various test equipment used for electrical measurements, eg DMM, oscilloscope, current probes, Data acquisition unit, data bus monitors (1553 MilBus probes/analysers) would be an advantage. Knowledge of the operation of a variety of spacecraft subsystems and overall system (power, comms, data handling, AOCS, system control and FDIR) Knowledge and experience of spacecraft systems and subsystem testing is essential, eg Data Handling, Packet Utilisation Standard, Data Bus Communications - 1553, SpaceWire, CAN bus, Power systems, FDIR. Working knowledge of Satellite TMTC Databases. Familiar with the Windows and Linux operating systems. Awareness of cleanroom' disciplines. Willing to support shifts and travel on test campaigns essential. Desirable Programming and Scripting languages, particularly writing, and debugging Linux/Unix bash scripts is an advantage. Knowledge of a programming language such as C, Java, python, TCL, VBA would be useful but not essential. Spacecraft electrical and harness knowledge would be an advantage but not essential. This is an umbrella contract, the role is Inside IR35
20/09/2024
Project-based
We are recruiting for a Satellite AIT Electrical Systems Engineer for a leading Defence & Space organisation based in Stevenage. Role Overview Preparation of test procedures and test sequences for Satellite systems and instrument testing during ambient and environmental test campaigns. Preparing, debugging and executing complex test sequences on flight spacecraft. Writing test reports and supporting test and non-conformance reviews. Responsibilities Designing and performing electrical and functional tests on a variety of subsystems (power, comms, data handling, AOCS, system control and FDIR) on test benches and spacecraft. Writing and executing electrical integration procedures to electrically verify and connect the equipment during the build of the spacecraft. Interpretation of electrical, functional and system test requirements from test specifications Provide test solutions to meet the test specification requirements, from planning and kick-off meeting, through test sequence coding, procedure preparation and debug to execution. Close out tests with Post Test Review and Test Report To provide technical inputs to project test reviews (Test Readiness Reviews, Post Test Reviews, Test Review Boards and Non-Conformance Review Boards) Development and debug of Automatic Test procedures (ATP) Preparing and executing spacecraft system investigations in line with actions from Non-Conformance Review Boards (NRBs). Support Spacecraft systems functional and performance tests during environmental test (Reference test, TVAC, Magnetic, EMC, functional and performance tests). Work to company and departmental procedures including quality and security. Use Digital Design and Manufacturing Systems (DDMS) to prepare and execute work instructions to support the testing. Skill Set Minimum of a degree in an Electrical Engineering related discipline or relevant experience in a similar role >5 years Current hands-on experience of writing test sequences/scripts for execution of spacecraft tests from the Central Checkout System (CCS). Test sequence writing and debugging in a bespoke language (C and Java knowledge would be an advantage) Competent in the use of various test equipment used for electrical measurements, eg DMM, oscilloscope, current probes, Data acquisition unit, data bus monitors (1553 MilBus probes/analysers) would be an advantage. Knowledge of the operation of a variety of spacecraft subsystems and overall system (power, comms, data handling, AOCS, system control and FDIR) Knowledge and experience of spacecraft systems and subsystem testing is essential, eg Data Handling, Packet Utilisation Standard, Data Bus Communications - 1553, SpaceWire, CAN bus, Power systems, FDIR. Working knowledge of Satellite TMTC Databases. Familiar with the Windows and Linux operating systems. Awareness of cleanroom' disciplines. Willing to support shifts and travel on test campaigns essential. Desirable Programming and Scripting languages, particularly writing, and debugging Linux/Unix bash scripts is an advantage. Knowledge of a programming language such as C, Java, python, TCL, VBA would be useful but not essential. Spacecraft electrical and harness knowledge would be an advantage but not essential. This is an umbrella contract, the role is Inside IR35
Position: Satellite AIT Electrical Systems Engineer Pay rate: £50.00 p/h inside IR35. location: Stevenage Role Type: 12 Month contract with extension Position: Hybrid role IO Associates seeks a Satellite AIT Electrical Systems Engineer for the Stevange site. Join a global aerospace leader specializing in commercial and military aircraft, helicopters, defense, and space sectors. This role offers a chance to contribute to innovative projects within a dynamic team shaping the future of aviation and space systems. Responsibilities Design and perform electrical/functional tests on spacecraft subsystems (power, comms, data handling, AOCS). Write and execute electrical integration procedures and Automatic Test Procedures (ATP). Support environmental testing (TVAC, magnetic, EMC) and provide technical inputs during test reviews. Conduct spacecraft system investigations and ensure compliance with quality and security standards using DDMS. Skills Electrical Engineering degree or 5+ years in spacecraft testing with hands-on experience writing/debugging test sequences (CCS) and knowledge of C/Java. Proficient in electrical measurement tools (DMM, oscilloscope, 1553 MilBus) and spacecraft subsystems (power, comms, FDIR). Familiar with Satellite TMTC databases and Windows/Linux OS. This is an excellent opportunity to work for an international company that encourages and facilitates personal growth Please apply or share your updated CV at:
20/09/2024
Project-based
Position: Satellite AIT Electrical Systems Engineer Pay rate: £50.00 p/h inside IR35. location: Stevenage Role Type: 12 Month contract with extension Position: Hybrid role IO Associates seeks a Satellite AIT Electrical Systems Engineer for the Stevange site. Join a global aerospace leader specializing in commercial and military aircraft, helicopters, defense, and space sectors. This role offers a chance to contribute to innovative projects within a dynamic team shaping the future of aviation and space systems. Responsibilities Design and perform electrical/functional tests on spacecraft subsystems (power, comms, data handling, AOCS). Write and execute electrical integration procedures and Automatic Test Procedures (ATP). Support environmental testing (TVAC, magnetic, EMC) and provide technical inputs during test reviews. Conduct spacecraft system investigations and ensure compliance with quality and security standards using DDMS. Skills Electrical Engineering degree or 5+ years in spacecraft testing with hands-on experience writing/debugging test sequences (CCS) and knowledge of C/Java. Proficient in electrical measurement tools (DMM, oscilloscope, 1553 MilBus) and spacecraft subsystems (power, comms, FDIR). Familiar with Satellite TMTC databases and Windows/Linux OS. This is an excellent opportunity to work for an international company that encourages and facilitates personal growth Please apply or share your updated CV at:
Senior Electrical Design Engineer - IEC 62368/61010 - Low Voltage DC Power - Low & Medium Voltage AC Power Systems Very hands on role, looking for a decision maker and someone who has done complex cable/electrical design. 3 days per week on-site in Fareham. BPSS clearance required. Experience: An established electrical design engineer, who has extensive experience across a range of projects in accordance with a variety of compliance standards. Experience of designing AC and DC systems for a variety of markets including complex markets with strict standard such as defence. Has previous been a design authority on as significant project and actively works to develop organisational capability. Desirable experience: Low voltage DC power and communication circuits. Low and Medium voltage AC power systems. Electrical safety assessment against IEC 62368. Skill set: Use of best practices for the design of electrical hardware solutions from concept to production. Including: Ability to translate customers' requirements from a statement of work into designs that satisfy the requirements specification. Experience in design for manufacture and testing. Ability to simulate, prototype, conduct experiments, analyse and interpret test data. Ability to generate and review relevant design documentation. Component selection and bill of material creation. Experience with electrical drawing software, preferably SolidWorks Electrical or similar. Desirable experience of working with: BS EN Standards such as 62368 and 61010 (Safety) and Military specs (Def-Stan). EMC and regulatory requirements (CE/UKCA). ISO 9001 standard or a professional and process driven methodology. RF design. Computing infrastructure
20/09/2024
Full time
Senior Electrical Design Engineer - IEC 62368/61010 - Low Voltage DC Power - Low & Medium Voltage AC Power Systems Very hands on role, looking for a decision maker and someone who has done complex cable/electrical design. 3 days per week on-site in Fareham. BPSS clearance required. Experience: An established electrical design engineer, who has extensive experience across a range of projects in accordance with a variety of compliance standards. Experience of designing AC and DC systems for a variety of markets including complex markets with strict standard such as defence. Has previous been a design authority on as significant project and actively works to develop organisational capability. Desirable experience: Low voltage DC power and communication circuits. Low and Medium voltage AC power systems. Electrical safety assessment against IEC 62368. Skill set: Use of best practices for the design of electrical hardware solutions from concept to production. Including: Ability to translate customers' requirements from a statement of work into designs that satisfy the requirements specification. Experience in design for manufacture and testing. Ability to simulate, prototype, conduct experiments, analyse and interpret test data. Ability to generate and review relevant design documentation. Component selection and bill of material creation. Experience with electrical drawing software, preferably SolidWorks Electrical or similar. Desirable experience of working with: BS EN Standards such as 62368 and 61010 (Safety) and Military specs (Def-Stan). EMC and regulatory requirements (CE/UKCA). ISO 9001 standard or a professional and process driven methodology. RF design. Computing infrastructure
Commercial Electrician Macclesfield £35,000-£40,000 + Bonus + Overtime + Vehicle/Fuel + Training + Progression Excellent role for a commercial Electrician looking to work for a rapidly growing, industry leading business within M&E Solutions, where a training and progression is available. Do you want a role where you will be rewarded financially and in terms of progression? Do you want to work for a business where you can have input on your own progression and that of the business? The company is a operates across building services, sustainability solutions and project offerings as a full turkey M&E solutions provider. They have grown year on year, and are the go to company in the north west. As an electrician for this business you will be integral to delivering outstanding projects from niche local businesses to blue chip multi nationals, with projects ranging from £50,000 to millions. In this role you will execute electrical installations, maintenance, and repairs to the highest standards, along with inspections and testing of electrical systems, ensuring compliance with industry standards. The company are looking for someone who has 18th edition, 2391 and NVQ L3. The role: *Excellent training and progression *Become a lead, team manager, project engineer/manager, and multiple other opportunities *£35,000-£45,000 + Vehicle + Bonus + Excellent training and progression program + Great benefits The person: *Must have 18th edition, 2391 and have NVQ L3 or equivalent *Must be happy to travel to sites - North west based By applying to this advert you are giving CPS Group (UK) Ltd authority to hold and process your data for this specific role and any other roles we may deem suitable to you over time. We will not pass your data to any third party without your verbal or written permission to do so. All incoming and outgoing calls are recorded for training and compliance purposes. CPS Group (UK) Ltd is acting as an Employment Agency in relation to this vacancy. Our new privacy policy can be found on our website
20/09/2024
Full time
Commercial Electrician Macclesfield £35,000-£40,000 + Bonus + Overtime + Vehicle/Fuel + Training + Progression Excellent role for a commercial Electrician looking to work for a rapidly growing, industry leading business within M&E Solutions, where a training and progression is available. Do you want a role where you will be rewarded financially and in terms of progression? Do you want to work for a business where you can have input on your own progression and that of the business? The company is a operates across building services, sustainability solutions and project offerings as a full turkey M&E solutions provider. They have grown year on year, and are the go to company in the north west. As an electrician for this business you will be integral to delivering outstanding projects from niche local businesses to blue chip multi nationals, with projects ranging from £50,000 to millions. In this role you will execute electrical installations, maintenance, and repairs to the highest standards, along with inspections and testing of electrical systems, ensuring compliance with industry standards. The company are looking for someone who has 18th edition, 2391 and NVQ L3. The role: *Excellent training and progression *Become a lead, team manager, project engineer/manager, and multiple other opportunities *£35,000-£45,000 + Vehicle + Bonus + Excellent training and progression program + Great benefits The person: *Must have 18th edition, 2391 and have NVQ L3 or equivalent *Must be happy to travel to sites - North west based By applying to this advert you are giving CPS Group (UK) Ltd authority to hold and process your data for this specific role and any other roles we may deem suitable to you over time. We will not pass your data to any third party without your verbal or written permission to do so. All incoming and outgoing calls are recorded for training and compliance purposes. CPS Group (UK) Ltd is acting as an Employment Agency in relation to this vacancy. Our new privacy policy can be found on our website
Electronic Design Engineer We are a global leader in specialised components and subsystems for innovative solutions in medical, science, aerospace, defence and industrial applications. Our products are everywhere, hospitals, planes, ships and even outer space, but you will only see them if you know where to look. This role includes the design of compact high reliability high voltage (5-10kV) systems for airborne military applications, specification of design requirements to meet system specifications and provision of support technical documentation - Key drivers are design for ultra small volume, versatility, and high reliability. General Accountabilities: Electronic Design Engineer Design of circuits and sub-systems to meet customer requirements and ensure a reliable, manufacturable product that meets the cost targets Provides fast, accurate, and technically competent resolution of technical issues during the development, production and in service Verification of the circuit and systems design through design simulation, practical test, and appropriate environmental test Considers regulatory, legislative, environmental and safety standards in design Underwrites changes to product build standard post the product launch as might be driven by continuous improvement activities, obsolescence, legislative or regulatory changes Identifies IPR/patent issues and opportunities ensuring these are assessed and drives raising of claims as required Regular review of the product market and technology advances to identify opportunities to develop new products and/or upgrades. Work with the business leadership to develop these into future development as appropriate Skills and Experience: Electronic Design Engineer Expert knowledge in design of power electronic systems: Switch Mode PSU design PCB Design High frequency digital and analogue circuits in MILSPEC applications High frequency magnetic components (transformers). High Voltage and high power experience ideal - 3 to 10kV, 500W to 2kW Experienced in design for Reliability (MTBF) in electronic systems Appreciation of electronics encapsulation in demanding environments Experienced in analysis of design failure mechanisms using DfMEA/FMECA. Demonstrates clear understanding of the demands of electrical safety and models safe working practices Knowledge of PCB layout tools and manufacturing techniques or similar for schematic capture & Mathcad
19/09/2024
Full time
Electronic Design Engineer We are a global leader in specialised components and subsystems for innovative solutions in medical, science, aerospace, defence and industrial applications. Our products are everywhere, hospitals, planes, ships and even outer space, but you will only see them if you know where to look. This role includes the design of compact high reliability high voltage (5-10kV) systems for airborne military applications, specification of design requirements to meet system specifications and provision of support technical documentation - Key drivers are design for ultra small volume, versatility, and high reliability. General Accountabilities: Electronic Design Engineer Design of circuits and sub-systems to meet customer requirements and ensure a reliable, manufacturable product that meets the cost targets Provides fast, accurate, and technically competent resolution of technical issues during the development, production and in service Verification of the circuit and systems design through design simulation, practical test, and appropriate environmental test Considers regulatory, legislative, environmental and safety standards in design Underwrites changes to product build standard post the product launch as might be driven by continuous improvement activities, obsolescence, legislative or regulatory changes Identifies IPR/patent issues and opportunities ensuring these are assessed and drives raising of claims as required Regular review of the product market and technology advances to identify opportunities to develop new products and/or upgrades. Work with the business leadership to develop these into future development as appropriate Skills and Experience: Electronic Design Engineer Expert knowledge in design of power electronic systems: Switch Mode PSU design PCB Design High frequency digital and analogue circuits in MILSPEC applications High frequency magnetic components (transformers). High Voltage and high power experience ideal - 3 to 10kV, 500W to 2kW Experienced in design for Reliability (MTBF) in electronic systems Appreciation of electronics encapsulation in demanding environments Experienced in analysis of design failure mechanisms using DfMEA/FMECA. Demonstrates clear understanding of the demands of electrical safety and models safe working practices Knowledge of PCB layout tools and manufacturing techniques or similar for schematic capture & Mathcad
Commissioning Technician - Power Engineering/Switchgear Commissioning/Power Engineering/Switchgear/HV/MV/LV/Electrical Distribution The company Independent Power Engineering firm based in Cheshire. Proven track record of delivering HV/MV/LV Switchgear projects on time and within budget. The role As Commissioning Technician you will work closely with the Management Team to maintain the smooth running of all projects involving all aspects of the position include the following, but not excluding activities not listed below: o Management of all Site activities. o Assisting Commissioning Engineers with the duties; o All Testing, Commissioning, Maintenance and Installation activities both on site project specific/location regardless of site location and project duration; o Completion of test/commissioning documentation; o Organisation and control of Method Statements, Risk Assessments and associated Health and Safety documentation; o Organisation of site equipment/tools are fit for purpose and in calibration and tested to complete specific job requirements; o General site work Management Health and Safety; o Ensuring that the working environment is clean, tidy and safe for access & egress; o Control of site time scales to meet contract deadlines; o Reporting to management on a daily basis for all site activities as required; o General site labour management; o Ensure compliance with the health & safety and environmental policies of the firm and its customers; o Customer liaison The requirements You should have a minimum of 2 years' experience within a Commissioning Technician or related role. Power Engineering/HV/MV/LV Switchgear experience is essential and your focus should be developing a career within Commissioning Engineering. You should possess HNC/ONC Engineering Certificate or similar qualification or valid experience, including a good understanding of electrical distribution systems (415V and above) and proven knowledge of Switchgear and Control. Enthusiastic and motivated, you will have good organisation and communication skills, with the ability to work within a team or alone. Experienced with Microsoft Office applications, you will hold a full valid UK driving licence and be prepared to travel throughout the UK, and from time to time, abroad. PLEASE NOTE: WE ARE INTERESTED IN CANDIDATES WITH DIFFERING LEVELS OF COMMISSIONING ENGINEERING EXPERIENCE
19/09/2024
Full time
Commissioning Technician - Power Engineering/Switchgear Commissioning/Power Engineering/Switchgear/HV/MV/LV/Electrical Distribution The company Independent Power Engineering firm based in Cheshire. Proven track record of delivering HV/MV/LV Switchgear projects on time and within budget. The role As Commissioning Technician you will work closely with the Management Team to maintain the smooth running of all projects involving all aspects of the position include the following, but not excluding activities not listed below: o Management of all Site activities. o Assisting Commissioning Engineers with the duties; o All Testing, Commissioning, Maintenance and Installation activities both on site project specific/location regardless of site location and project duration; o Completion of test/commissioning documentation; o Organisation and control of Method Statements, Risk Assessments and associated Health and Safety documentation; o Organisation of site equipment/tools are fit for purpose and in calibration and tested to complete specific job requirements; o General site work Management Health and Safety; o Ensuring that the working environment is clean, tidy and safe for access & egress; o Control of site time scales to meet contract deadlines; o Reporting to management on a daily basis for all site activities as required; o General site labour management; o Ensure compliance with the health & safety and environmental policies of the firm and its customers; o Customer liaison The requirements You should have a minimum of 2 years' experience within a Commissioning Technician or related role. Power Engineering/HV/MV/LV Switchgear experience is essential and your focus should be developing a career within Commissioning Engineering. You should possess HNC/ONC Engineering Certificate or similar qualification or valid experience, including a good understanding of electrical distribution systems (415V and above) and proven knowledge of Switchgear and Control. Enthusiastic and motivated, you will have good organisation and communication skills, with the ability to work within a team or alone. Experienced with Microsoft Office applications, you will hold a full valid UK driving licence and be prepared to travel throughout the UK, and from time to time, abroad. PLEASE NOTE: WE ARE INTERESTED IN CANDIDATES WITH DIFFERING LEVELS OF COMMISSIONING ENGINEERING EXPERIENCE
Senior System Engineer Permanent Sheffield, United Kingdom Upto £50,000 Experis is proud to have partnered with a leading system integrator in the north of England. A small but punchy team that often is found at the forefront of creating complete systems for their clients who are active in several different industries. They seek a dynamically minded person who has the want and desire to work on multiple projects both software and hardware and also has a customer-focused mindset. Our clients can often be found working in a number of industries such as EV, Aerospace & Defence alongside more emerging markets of Radio Frequency. They consider themselves to be a test and measurement business and as stated already create bespoke solutions for their clients. These are dotted all around the UK so frequent travel is an absolute requirement for this role which could be up to 4 nights a week, although a super rare case! Core Competencies: A results-focused, action-oriented mentality is essential with the ability to deal effectively with customers to deliver successful project outcomes. Must be able to multitask, manage time and prioritise effectively. Problem-solving skills to analyse the problem following a logical and methodical approach, whilst also thinking creatively to provide a solution. Excellent written, oral and presentation skills. Enjoy working as a team player as well as working autonomously. technical Skills: A degree in engineering, such as electrical/electronic engineering, mechatronics, mechanical, computer science or equivalent. Knowledge of instrumentation, control and industrial automation. Demonstrable experience in measurement & instrumentation design. Proven experience in requirements capture and writing technical proposals. Ability to debug and solve problems a range of systems in an efficient manner. Experience with mainstream PLC brands (Siemens, Allen Bradley, etc) Desire and ability to learn new skills/programming languages/applications. PLC or NI instrumentation and control panel experience. Legal right to live and work in the UK. Valid passport for global travel. Must hold a full clean valid UK driving licence and own vehicle to use for work travel. People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
18/09/2024
Full time
Senior System Engineer Permanent Sheffield, United Kingdom Upto £50,000 Experis is proud to have partnered with a leading system integrator in the north of England. A small but punchy team that often is found at the forefront of creating complete systems for their clients who are active in several different industries. They seek a dynamically minded person who has the want and desire to work on multiple projects both software and hardware and also has a customer-focused mindset. Our clients can often be found working in a number of industries such as EV, Aerospace & Defence alongside more emerging markets of Radio Frequency. They consider themselves to be a test and measurement business and as stated already create bespoke solutions for their clients. These are dotted all around the UK so frequent travel is an absolute requirement for this role which could be up to 4 nights a week, although a super rare case! Core Competencies: A results-focused, action-oriented mentality is essential with the ability to deal effectively with customers to deliver successful project outcomes. Must be able to multitask, manage time and prioritise effectively. Problem-solving skills to analyse the problem following a logical and methodical approach, whilst also thinking creatively to provide a solution. Excellent written, oral and presentation skills. Enjoy working as a team player as well as working autonomously. technical Skills: A degree in engineering, such as electrical/electronic engineering, mechatronics, mechanical, computer science or equivalent. Knowledge of instrumentation, control and industrial automation. Demonstrable experience in measurement & instrumentation design. Proven experience in requirements capture and writing technical proposals. Ability to debug and solve problems a range of systems in an efficient manner. Experience with mainstream PLC brands (Siemens, Allen Bradley, etc) Desire and ability to learn new skills/programming languages/applications. PLC or NI instrumentation and control panel experience. Legal right to live and work in the UK. Valid passport for global travel. Must hold a full clean valid UK driving licence and own vehicle to use for work travel. People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
PLC Engineer | Manufacturing | North Derbyshire I have just taken a brief for an exciting hands-on PLC Engineer position, based 5 days per week at our client's North Derbyshire manufacturing site. This global business is expanding rapidly and needs someone to support their cutting-edge manufacturing plant, with a focus on PLC systems. In this role, you'll be responsible for the setup, programming, and maintenance of PLC systems, ensuring that production lines run seamlessly. You will troubleshoot, optimize, and implement new PLC logic and automation controls, playing a key part in the continuous improvement of manufacturing processes. A strong focus on Siemens S7 experience is essential, and you'll also contribute to maintaining high standards of system reliability and cyber security. Technical expertise in Siemens PLCs is preferable, but knowledge of other automation platforms like Allen Bradley or Mitsubishi would be advantageous. You'll work with networking protocols (Ethernet, Profibus, Profinet), HMIs, and related manufacturing technologies. Any experience with SCADA systems and industrial communication standards will be beneficial. Our client is looking for someone with a solid background in manufacturing environments, where you've played a key role in PLC programming, maintenance, and troubleshooting. Experience with robotics integration, automation projects, and electrical schematics will be highly valued. You'll need strong knowledge of Siemens S7 programming and have experience working in environments using HMI systems, network protocols, and control panel wiring. A good understanding of industrial automation standards and troubleshooting skills are key to success in this role. In return, you'll be joining a dynamic company in a period of exciting growth, with opportunities for career advancement. You'll have access to one of the best pension schemes in the industry, an annual bonus, regular social events, and much more! If this could be of interest, please get in touch ASAP for immediate consideration. Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
18/09/2024
Full time
PLC Engineer | Manufacturing | North Derbyshire I have just taken a brief for an exciting hands-on PLC Engineer position, based 5 days per week at our client's North Derbyshire manufacturing site. This global business is expanding rapidly and needs someone to support their cutting-edge manufacturing plant, with a focus on PLC systems. In this role, you'll be responsible for the setup, programming, and maintenance of PLC systems, ensuring that production lines run seamlessly. You will troubleshoot, optimize, and implement new PLC logic and automation controls, playing a key part in the continuous improvement of manufacturing processes. A strong focus on Siemens S7 experience is essential, and you'll also contribute to maintaining high standards of system reliability and cyber security. Technical expertise in Siemens PLCs is preferable, but knowledge of other automation platforms like Allen Bradley or Mitsubishi would be advantageous. You'll work with networking protocols (Ethernet, Profibus, Profinet), HMIs, and related manufacturing technologies. Any experience with SCADA systems and industrial communication standards will be beneficial. Our client is looking for someone with a solid background in manufacturing environments, where you've played a key role in PLC programming, maintenance, and troubleshooting. Experience with robotics integration, automation projects, and electrical schematics will be highly valued. You'll need strong knowledge of Siemens S7 programming and have experience working in environments using HMI systems, network protocols, and control panel wiring. A good understanding of industrial automation standards and troubleshooting skills are key to success in this role. In return, you'll be joining a dynamic company in a period of exciting growth, with opportunities for career advancement. You'll have access to one of the best pension schemes in the industry, an annual bonus, regular social events, and much more! If this could be of interest, please get in touch ASAP for immediate consideration. Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
I am working with a close client of mine looking to bring on board a Mechanical Design Engineer to join their dynamic team in Derby. In this role, you will be responsible for designing, developing, and optimizing mechanical systems and components for our innovative products. Benefits: Hybrid/remote working Free parking Company pension On-site parking Private medical insurance Key Responsibilities: Conceptualize, design, and develop mechanical systems and components using CAD software (eg, SolidWorks, AutoCAD) Perform engineering calculations and analysis to ensure designs meet specifications and performance requirements Create and maintain technical documentation, including design drawings, specifications, and test reports Collaborate with cross-functional teams, including electrical engineers, materials scientists, and manufacturing engineers Conduct feasibility studies and research on new technologies and materials Qualifications: Bachelor's degree in Mechanical Engineering or related field (Master's degree preferred) 3+ years of experience in mechanical design engineering Proficiency in 3D CAD software (preferably SolidWorks) Strong understanding of engineering principles, materials science, and manufacturing processes Excellent problem-solving and analytical skills Strong communication and teamwork abilities
18/09/2024
Full time
I am working with a close client of mine looking to bring on board a Mechanical Design Engineer to join their dynamic team in Derby. In this role, you will be responsible for designing, developing, and optimizing mechanical systems and components for our innovative products. Benefits: Hybrid/remote working Free parking Company pension On-site parking Private medical insurance Key Responsibilities: Conceptualize, design, and develop mechanical systems and components using CAD software (eg, SolidWorks, AutoCAD) Perform engineering calculations and analysis to ensure designs meet specifications and performance requirements Create and maintain technical documentation, including design drawings, specifications, and test reports Collaborate with cross-functional teams, including electrical engineers, materials scientists, and manufacturing engineers Conduct feasibility studies and research on new technologies and materials Qualifications: Bachelor's degree in Mechanical Engineering or related field (Master's degree preferred) 3+ years of experience in mechanical design engineering Proficiency in 3D CAD software (preferably SolidWorks) Strong understanding of engineering principles, materials science, and manufacturing processes Excellent problem-solving and analytical skills Strong communication and teamwork abilities
Job Title: Project Supervisor (Electrical) Initial 6-month contract (potential for long term extensions) UK wide travel required for approx. 80% of the role £30 per hour Pontoon is an employment consultancy. We put expertise, energy, and enthusiasm into improving everyone's chance of being part of the workplace. We respect and appreciate people of all ethnicities, generations, religious beliefs, sexual orientations, gender identities, and more. We do this by showcasing their talents, skills, and unique experience in an inclusive environment that helps them thrive. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. About the Role We have exciting opportunities for a Project Supervisor (Electrical) specializing in electrical engineering projects on hazardous area installations across the UK. This is a home-start position. Our client owns and operates the National Transmission System (NTS), which consists of 7600km of large diameter high-pressure natural gas pipelines, gas terminals, compressor stations, and above-ground installations (AGIs). The primary role is to deliver capital projects to time, cost, and quality within project governance requirements, ensuring health, safety, and environmental issues are managed throughout the project life cycle. This role will have end-to-end accountability for the definition, development, delivery, and closure of investment projects for Gas Transmission, ensuring the delivery of projects that meet all safety, environmental, functional performance, financial performance, and regulatory requirements. Key Accountabilities Provide first-line assurance, supervision, and leadership on site. Oversee and manage health & safety, as well as sub-contractors. Collate and review Risk Assessment and Method Statements and Construction pack. Lead and/or participate in task briefings, inductions, and toolbox talks as required. Ensure sensible monitoring is implemented. Drive a team culture of safe working and safety compliance associated with all activities. Manage the programme and progress reporting to the Project Manager. Liaise with all members of the project team (including contractors) to complete works in line with the programme. Manage and maintain daily allocation sheets for contractors. Manage own workload and productivity on site. Solve issues that arise on site. Undertake incident investigations and safety/technical inspections on site. Conduct regular on-site audits to evaluate and assess safety and environmental protection measures implemented throughout the construction and commissioning phases. Inspect the quality of installation, testing, and commissioning, and identify defects that need rectification before completion. Undertake quality assessment of electrical and instrumentation test records. Collate and verify the Operational and Maintenance Manual of newly installed assets. Collate and verify Explosion Protection Document pack (EPD). Review and sign off red-line drawings and operational drawings to ensure accuracy of records of newly installed assets. Review and verify Cyber Register and Asset Records. Develop relationships with internal and external stakeholders to foster a collaborative team environment. Test and challenge design, installation, test, and maintenance requirements as appropriate and highlight areas for improvement to ensure the implementation of robust solutions. About You Experience in electrical installations, both industrial and commercial. Understanding of power distribution systems/standby power systems including diesel generators, Ex rated equipment, lighting motors, etc. Experience and understanding of potentially explosive atmospheres and COMPEX. Detailed understanding of the Safe Control of Operations procedures (SCO/91 & SCO/94) and has undertaken the role of Competent Person. Detailed understanding of EL/96 for all work types. Good understanding of health & safety regulations. Experience of successful project delivery and project team working. Experience in project management and risk management skills for delivery of projects to scope, time, cost, quality, safety, and security of supply. Experience with different contract management types, including NEC Option A, C, and E. Understanding and experience of safety and environmental legislation and practices and policies. Understanding and experience of CDM, design management, and safety management. If this is of interest, please respond with an up to date CV. If you have not received a response within a 48 hour period, please assume that you have been unsuccessful on this occasion.
18/09/2024
Project-based
Job Title: Project Supervisor (Electrical) Initial 6-month contract (potential for long term extensions) UK wide travel required for approx. 80% of the role £30 per hour Pontoon is an employment consultancy. We put expertise, energy, and enthusiasm into improving everyone's chance of being part of the workplace. We respect and appreciate people of all ethnicities, generations, religious beliefs, sexual orientations, gender identities, and more. We do this by showcasing their talents, skills, and unique experience in an inclusive environment that helps them thrive. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. About the Role We have exciting opportunities for a Project Supervisor (Electrical) specializing in electrical engineering projects on hazardous area installations across the UK. This is a home-start position. Our client owns and operates the National Transmission System (NTS), which consists of 7600km of large diameter high-pressure natural gas pipelines, gas terminals, compressor stations, and above-ground installations (AGIs). The primary role is to deliver capital projects to time, cost, and quality within project governance requirements, ensuring health, safety, and environmental issues are managed throughout the project life cycle. This role will have end-to-end accountability for the definition, development, delivery, and closure of investment projects for Gas Transmission, ensuring the delivery of projects that meet all safety, environmental, functional performance, financial performance, and regulatory requirements. Key Accountabilities Provide first-line assurance, supervision, and leadership on site. Oversee and manage health & safety, as well as sub-contractors. Collate and review Risk Assessment and Method Statements and Construction pack. Lead and/or participate in task briefings, inductions, and toolbox talks as required. Ensure sensible monitoring is implemented. Drive a team culture of safe working and safety compliance associated with all activities. Manage the programme and progress reporting to the Project Manager. Liaise with all members of the project team (including contractors) to complete works in line with the programme. Manage and maintain daily allocation sheets for contractors. Manage own workload and productivity on site. Solve issues that arise on site. Undertake incident investigations and safety/technical inspections on site. Conduct regular on-site audits to evaluate and assess safety and environmental protection measures implemented throughout the construction and commissioning phases. Inspect the quality of installation, testing, and commissioning, and identify defects that need rectification before completion. Undertake quality assessment of electrical and instrumentation test records. Collate and verify the Operational and Maintenance Manual of newly installed assets. Collate and verify Explosion Protection Document pack (EPD). Review and sign off red-line drawings and operational drawings to ensure accuracy of records of newly installed assets. Review and verify Cyber Register and Asset Records. Develop relationships with internal and external stakeholders to foster a collaborative team environment. Test and challenge design, installation, test, and maintenance requirements as appropriate and highlight areas for improvement to ensure the implementation of robust solutions. About You Experience in electrical installations, both industrial and commercial. Understanding of power distribution systems/standby power systems including diesel generators, Ex rated equipment, lighting motors, etc. Experience and understanding of potentially explosive atmospheres and COMPEX. Detailed understanding of the Safe Control of Operations procedures (SCO/91 & SCO/94) and has undertaken the role of Competent Person. Detailed understanding of EL/96 for all work types. Good understanding of health & safety regulations. Experience of successful project delivery and project team working. Experience in project management and risk management skills for delivery of projects to scope, time, cost, quality, safety, and security of supply. Experience with different contract management types, including NEC Option A, C, and E. Understanding and experience of safety and environmental legislation and practices and policies. Understanding and experience of CDM, design management, and safety management. If this is of interest, please respond with an up to date CV. If you have not received a response within a 48 hour period, please assume that you have been unsuccessful on this occasion.
In this role you will be responsible for carrying out maintenance, commissioning of small works and reactive call outs on various District Heating, Energy Centre and BMS systems. The ideal candidate would have a strong bias towards mechanical engineering and be proficient with a variety of experience, including but not limited to any of the following: CHP, heat pumps & boiler systems. You will be expected to work well as part of a team but also work efficiently on your own as required. You may be responsible for supervising junior engineer's ensuring they work effectively and safely whilst on site. You will be part of the service/small works commissioning team therefore the sharing of technical knowledge with other engineers is encouraged whilst obtaining support from the team when necessary. RESPONSIBILITIES: Check emails daily for instructions Responsible for making backups of software and strategy files as required for all sites visited under a service agreement Update the server on a regular basis with backup Responsible for taking electrical LAN maps of site architecture (if applicable) for all sites visited under a service Responsible for designing and implementing PPM planners for all sites visited under a service agreement Responsible for the care and maintenance of all controls equipment as per company policy, for all sites visited under a service agreement Responsible for attending callouts and breakdowns as and when required, according to company SLA's Provide daily updates to line manager Complete site reports for each visit performed, detailing work carried out and recommendations Responsible for building and maintaining strong client relations Carry out conditional site surveys as required and produce fully detailed reports complete with recommendations Technical Mechanical engineering experience Ideal experience from a design or engineering background Electrically competent Ability to correctly interpret and alter existing control strategy/panel drawings/plant schematics Understanding of HVAC principles
17/09/2024
Full time
In this role you will be responsible for carrying out maintenance, commissioning of small works and reactive call outs on various District Heating, Energy Centre and BMS systems. The ideal candidate would have a strong bias towards mechanical engineering and be proficient with a variety of experience, including but not limited to any of the following: CHP, heat pumps & boiler systems. You will be expected to work well as part of a team but also work efficiently on your own as required. You may be responsible for supervising junior engineer's ensuring they work effectively and safely whilst on site. You will be part of the service/small works commissioning team therefore the sharing of technical knowledge with other engineers is encouraged whilst obtaining support from the team when necessary. RESPONSIBILITIES: Check emails daily for instructions Responsible for making backups of software and strategy files as required for all sites visited under a service agreement Update the server on a regular basis with backup Responsible for taking electrical LAN maps of site architecture (if applicable) for all sites visited under a service Responsible for designing and implementing PPM planners for all sites visited under a service agreement Responsible for the care and maintenance of all controls equipment as per company policy, for all sites visited under a service agreement Responsible for attending callouts and breakdowns as and when required, according to company SLA's Provide daily updates to line manager Complete site reports for each visit performed, detailing work carried out and recommendations Responsible for building and maintaining strong client relations Carry out conditional site surveys as required and produce fully detailed reports complete with recommendations Technical Mechanical engineering experience Ideal experience from a design or engineering background Electrically competent Ability to correctly interpret and alter existing control strategy/panel drawings/plant schematics Understanding of HVAC principles
Title: Principal Electrical Design Engineer (SC Cleared) Location: Burlington House, New Malden, Kingston-Upon-Thames, London, UK. Length: 6 months with scope to extend Note: This Opportunity will be 5 days a week on site due to SC clearance required. At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Role Summary: A key member of the Hardware Engineering team, this role will work to provide electrical design engineering expertise for maritime control and instrumentation systems throughout the full project life cycle, from requirements and concept design through to validation and qualification. This will involve the selection, design, development and analysis of electrical systems and components to deliver a Platform Management System (PMS) on a variety of Defence programmes. Your Responsibilities: Electrical design engineering Subject Matter Expert (SME) or technical lead for Platform Management Systems (PMS) Design and develop electrical panel/enclosure/cabinet design in accordance with customer requirements and first principles where required. Create, modify, maintain and manage electrical designs for power and control systems Analyse and justify electrical based designs and component selection Review electrical schematics in accordance with relevant standards and internal Computer Aided Design (CAD) processes. Produce, modify, maintain and manage technical documents to support contractual deliverables (eg specifications, design documents, Bill of Materials (BOMs) etc.) Resolve electrical issues during hardware design, development, manufacture, integration and qualification Provide electrical engineering expertise to derive, define, decompose and manage requirements Your Experience: Strong experience in an Electrical Design Engineering position Previous experience as a Hardware lead, Electrical lead or similar Engineering Degree in related discipline (experienced Electrical Design Engineers without a degree will also be considered Understanding and working knowledge of electrical related Defence Standards, including Lloyds Register and other Military Standards (eg Def Stan 59-411) Ability to work under pressure in a complex and rapidly changing environment. Mandatory Background: Active SC Clearance If you meet the above requirements, please contact Experis to be considered for this opportunity.
17/09/2024
Project-based
Title: Principal Electrical Design Engineer (SC Cleared) Location: Burlington House, New Malden, Kingston-Upon-Thames, London, UK. Length: 6 months with scope to extend Note: This Opportunity will be 5 days a week on site due to SC clearance required. At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Role Summary: A key member of the Hardware Engineering team, this role will work to provide electrical design engineering expertise for maritime control and instrumentation systems throughout the full project life cycle, from requirements and concept design through to validation and qualification. This will involve the selection, design, development and analysis of electrical systems and components to deliver a Platform Management System (PMS) on a variety of Defence programmes. Your Responsibilities: Electrical design engineering Subject Matter Expert (SME) or technical lead for Platform Management Systems (PMS) Design and develop electrical panel/enclosure/cabinet design in accordance with customer requirements and first principles where required. Create, modify, maintain and manage electrical designs for power and control systems Analyse and justify electrical based designs and component selection Review electrical schematics in accordance with relevant standards and internal Computer Aided Design (CAD) processes. Produce, modify, maintain and manage technical documents to support contractual deliverables (eg specifications, design documents, Bill of Materials (BOMs) etc.) Resolve electrical issues during hardware design, development, manufacture, integration and qualification Provide electrical engineering expertise to derive, define, decompose and manage requirements Your Experience: Strong experience in an Electrical Design Engineering position Previous experience as a Hardware lead, Electrical lead or similar Engineering Degree in related discipline (experienced Electrical Design Engineers without a degree will also be considered Understanding and working knowledge of electrical related Defence Standards, including Lloyds Register and other Military Standards (eg Def Stan 59-411) Ability to work under pressure in a complex and rapidly changing environment. Mandatory Background: Active SC Clearance If you meet the above requirements, please contact Experis to be considered for this opportunity.
Hardware Engineer - Reading - Comptetive Salary VIQU have partnered with an organisation who specialises in digital transformations and operational technology who have been ahead of the game with their advanced systems for years. The business who are going from strength to strength, are looking to hire a Hardware Engineer to be part of the business's world class team ahead of their expanding project opportunities. The Hardware Engineer will be primary based in Reading and will be designing hardware systems using various hardware components for a key focus on MCCs, PLCs, Switchgear and Drives & Controls. Essential requirements for the Hardware Engineer - - Must be a British citizen. - Strong understanding of designing electrical panels containing PLC's and LV distribution systems. - Design of containment systems and electrical cabling - Proven experience of AutoCAD Electrical, Microsoft office products. - Working with production to see the design through to completion. - Mentoring experience with junior engineers. - Experience overseeing and quality checking drawings of junior engineers. - Understanding of IEC BS EN 61439-1,Low-voltage switchgear and control gear assemblies - Ability to develop technical solutions to meet customer and project expectations Benefits of the Hardware Engineer - - 25 days holiday plus bank holidays Tailored pension planning scheme - Life assurance policy and private health care - Support in achieving professional engineer status (IEng, CEng) and professional memberships fees covered. Hardware Engineer - Reading - Comptetive Salary To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Jack McManus emailing (see below) If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply).
16/09/2024
Full time
Hardware Engineer - Reading - Comptetive Salary VIQU have partnered with an organisation who specialises in digital transformations and operational technology who have been ahead of the game with their advanced systems for years. The business who are going from strength to strength, are looking to hire a Hardware Engineer to be part of the business's world class team ahead of their expanding project opportunities. The Hardware Engineer will be primary based in Reading and will be designing hardware systems using various hardware components for a key focus on MCCs, PLCs, Switchgear and Drives & Controls. Essential requirements for the Hardware Engineer - - Must be a British citizen. - Strong understanding of designing electrical panels containing PLC's and LV distribution systems. - Design of containment systems and electrical cabling - Proven experience of AutoCAD Electrical, Microsoft office products. - Working with production to see the design through to completion. - Mentoring experience with junior engineers. - Experience overseeing and quality checking drawings of junior engineers. - Understanding of IEC BS EN 61439-1,Low-voltage switchgear and control gear assemblies - Ability to develop technical solutions to meet customer and project expectations Benefits of the Hardware Engineer - - 25 days holiday plus bank holidays Tailored pension planning scheme - Life assurance policy and private health care - Support in achieving professional engineer status (IEng, CEng) and professional memberships fees covered. Hardware Engineer - Reading - Comptetive Salary To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Jack McManus emailing (see below) If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply).