Position Available : Systems Engineer (Sensors & Navigation) Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £60,000 + Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices etc A basic understanding of project management is also needed for this role. Any experience with modelling tools such as MATLAB would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Monitoring technology advancements and areas for innovation Collaborating with suppliers and researchers for technology development Designing and conducting laboratory tests Supporting team trials Conducting research and design activities Investigating engineering problems Project management What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Appreciation of system design & integration challenges Basic understanding of project management processes Modelling skills, including proficiency with tools such as MATLAB, is a bonus to have Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
17/05/2024
Full time
Position Available : Systems Engineer (Sensors & Navigation) Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £60,000 + Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices etc A basic understanding of project management is also needed for this role. Any experience with modelling tools such as MATLAB would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Monitoring technology advancements and areas for innovation Collaborating with suppliers and researchers for technology development Designing and conducting laboratory tests Supporting team trials Conducting research and design activities Investigating engineering problems Project management What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Appreciation of system design & integration challenges Basic understanding of project management processes Modelling skills, including proficiency with tools such as MATLAB, is a bonus to have Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Mechanical Engineer/Aerospace Engineer - Aerospace Testing Equipment, Wind Tunnels, Force Measurement & Positioning Systems; Bespoke Mechanical Engineering, Design, Hands-on Assembly, Installation; FEA, CAE from: Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc. Permanent, East Sussex, Onsite. C.£60k + Bonus. Specialist Engineering firm with 30 year trading history and a leading position within the Wind Tunnel/Airflow Testing Solutions marketplace seek Mechanical Engineer to join the business and play a lead role within the team. With the majority of their clients operating within the Aerospace, Motorsport and Defence sectors the company delivers bespoke engineering solutions to clients across the globe. A wide range of wind/air flow testing solutions are offered within their product range with each actual delivery being bespoke in nature. The Mechanical Engineer/Aerospace Engineer will work in a lead capacity and within the full life cycle. This will require the design of the solution using 3D CAE tools such as Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc, liaison with the fabricators and then the subsequent (hands-on) build and assembly of the systems either in the company's factory environment and/or onsite anywhere in the world. You will plan complex engineering projects, design solutions/oversee solutions designed by the team, play a key role in the assembly and installation but also solve problems as they arise and advise on appropriate methods and solutions to improve the end product. This will require both leadership of the team, engagement with senior management, project management capability as well as engagement with customers within some of the worlds' leading organisations within the Aerospace, Automotive, Motorsport and Defence sectors. We are searching for an experienced Mechanical Engineer/Aerospace Engineer who possesses many years' experience in the full life cycle of aeronautical/motion control/electromechanical engineering fields where you will have gained experience in in 2D and 3D CAE with either Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc. You will be a hands-on Engineer with experience of machined components to tight tolerances; large, welded fabrications. You will be comfortable with the concepts of FEA (Finite Element Analysis). Leadership, Project Management, Client Engagement and an overall keen eye for detail will all be expected and in return you will have the opportunity to deliver first class systems for some of the world's leading companies. Excellent communication skills will be required. SC clearance required/to be undertaken on appointment. This is an exceptional opportunity to join a well-established, leading specialist engineering company with exciting global prospects. Due to the hands-on nature of this role we require someone who can work Full Time, onsite at the company's facility in rural East Sussex. You will need to be in possession of a full driving license and car as the offices and assembly centre are not within walking distance of the mainline train station. The location is easily commutable (by car) from areas including Eastbourne, Hailsham, Hastings, Uckfield East Sussex; Tunbridge Wells, Sevenoaks, Kent; East Grinstead, Crawley West Sussex; Horley, Redhill, Surrey.
17/05/2024
Full time
Mechanical Engineer/Aerospace Engineer - Aerospace Testing Equipment, Wind Tunnels, Force Measurement & Positioning Systems; Bespoke Mechanical Engineering, Design, Hands-on Assembly, Installation; FEA, CAE from: Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc. Permanent, East Sussex, Onsite. C.£60k + Bonus. Specialist Engineering firm with 30 year trading history and a leading position within the Wind Tunnel/Airflow Testing Solutions marketplace seek Mechanical Engineer to join the business and play a lead role within the team. With the majority of their clients operating within the Aerospace, Motorsport and Defence sectors the company delivers bespoke engineering solutions to clients across the globe. A wide range of wind/air flow testing solutions are offered within their product range with each actual delivery being bespoke in nature. The Mechanical Engineer/Aerospace Engineer will work in a lead capacity and within the full life cycle. This will require the design of the solution using 3D CAE tools such as Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc, liaison with the fabricators and then the subsequent (hands-on) build and assembly of the systems either in the company's factory environment and/or onsite anywhere in the world. You will plan complex engineering projects, design solutions/oversee solutions designed by the team, play a key role in the assembly and installation but also solve problems as they arise and advise on appropriate methods and solutions to improve the end product. This will require both leadership of the team, engagement with senior management, project management capability as well as engagement with customers within some of the worlds' leading organisations within the Aerospace, Automotive, Motorsport and Defence sectors. We are searching for an experienced Mechanical Engineer/Aerospace Engineer who possesses many years' experience in the full life cycle of aeronautical/motion control/electromechanical engineering fields where you will have gained experience in in 2D and 3D CAE with either Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc. You will be a hands-on Engineer with experience of machined components to tight tolerances; large, welded fabrications. You will be comfortable with the concepts of FEA (Finite Element Analysis). Leadership, Project Management, Client Engagement and an overall keen eye for detail will all be expected and in return you will have the opportunity to deliver first class systems for some of the world's leading companies. Excellent communication skills will be required. SC clearance required/to be undertaken on appointment. This is an exceptional opportunity to join a well-established, leading specialist engineering company with exciting global prospects. Due to the hands-on nature of this role we require someone who can work Full Time, onsite at the company's facility in rural East Sussex. You will need to be in possession of a full driving license and car as the offices and assembly centre are not within walking distance of the mainline train station. The location is easily commutable (by car) from areas including Eastbourne, Hailsham, Hastings, Uckfield East Sussex; Tunbridge Wells, Sevenoaks, Kent; East Grinstead, Crawley West Sussex; Horley, Redhill, Surrey.
An excellent 12-month contract for a Fluent French speaking Embedded Software Engineer. Onsite in Belgium, possibility of remote working in the future. Daily rate: 450 Euros The client specialises in the Defence, Security (including Cyber) and Aerospace. MISSION The client wants to reinforce its technical team and is looking for an engineer who wants to develop as an Embedded software engineer. As an Embedded Software Engineer, you will integrate a multidisciplinary team of development within the Engineering department. You will be required, in the context of on firing systems or smart ammunitions, to specify, design, develop, validate, and test Embedded software. You will have the opportunity to work with innovated systems and tools in a high-tech environment. You will be expected to support multiple projects and as such will require planning and organising skills. RESPONSIBILITY Based on upper system specifications, allocate performances, define a software solution Write low- and high-level software requirements using dedicated tools and ensure traceability between requirements. Develop software in C/C++ on Microprocessor, bare metal, or Linux RTOS architecture. Understand and solve the constraints of Real Time applications, low/high level communications, multi-tread management, memory concurrency, etc. Collaborate with hardware engineer to develop abstraction layer of the hardware. Use configuration managements tools (GIT, BitBucket, Jenkins, SonarQube) Ensure code quality by checking code coverage and verify the software using unit testing procedure. Debug low level software using oscilloscopes. Collaborate with V&V and DevOps team to setup a continuous integration system. Write Software Description Documents to capitalize knowledges. Participate to internal project reviews within the company, and external reviews with the customers. Participate in the development of FPGA (VHDL language) as a plus. PROFILE You graduated with a master's degree in software or Electronic Engineer with 3 to 10 years of experience. You are architect and senior developer in C, C++ on Embedded systems Real Time application. You understand the challenges of embedding Real Time solution in micro-controllers. You have an experience in development of FPGA using VHDL and communication systems (CAN, UART,SPI, I2C, Ethernet TCP/IP and Phy, MIL-STD-1553/1760, ARINC429 ) You are a good communicator; you can show pedagogy to support other developers. You are self-motivated and like to take initiatives. You can work with Agile culture. You like following the latest trends in innovation. An experience in aeronautical, spatial, defence or automotive industry, as well as a knowledge of the standards DO-178, ARP4754 or ISO26262, is a plus. English and French (spoken and written) Please get in touch for further details.
16/05/2024
Project-based
An excellent 12-month contract for a Fluent French speaking Embedded Software Engineer. Onsite in Belgium, possibility of remote working in the future. Daily rate: 450 Euros The client specialises in the Defence, Security (including Cyber) and Aerospace. MISSION The client wants to reinforce its technical team and is looking for an engineer who wants to develop as an Embedded software engineer. As an Embedded Software Engineer, you will integrate a multidisciplinary team of development within the Engineering department. You will be required, in the context of on firing systems or smart ammunitions, to specify, design, develop, validate, and test Embedded software. You will have the opportunity to work with innovated systems and tools in a high-tech environment. You will be expected to support multiple projects and as such will require planning and organising skills. RESPONSIBILITY Based on upper system specifications, allocate performances, define a software solution Write low- and high-level software requirements using dedicated tools and ensure traceability between requirements. Develop software in C/C++ on Microprocessor, bare metal, or Linux RTOS architecture. Understand and solve the constraints of Real Time applications, low/high level communications, multi-tread management, memory concurrency, etc. Collaborate with hardware engineer to develop abstraction layer of the hardware. Use configuration managements tools (GIT, BitBucket, Jenkins, SonarQube) Ensure code quality by checking code coverage and verify the software using unit testing procedure. Debug low level software using oscilloscopes. Collaborate with V&V and DevOps team to setup a continuous integration system. Write Software Description Documents to capitalize knowledges. Participate to internal project reviews within the company, and external reviews with the customers. Participate in the development of FPGA (VHDL language) as a plus. PROFILE You graduated with a master's degree in software or Electronic Engineer with 3 to 10 years of experience. You are architect and senior developer in C, C++ on Embedded systems Real Time application. You understand the challenges of embedding Real Time solution in micro-controllers. You have an experience in development of FPGA using VHDL and communication systems (CAN, UART,SPI, I2C, Ethernet TCP/IP and Phy, MIL-STD-1553/1760, ARINC429 ) You are a good communicator; you can show pedagogy to support other developers. You are self-motivated and like to take initiatives. You can work with Agile culture. You like following the latest trends in innovation. An experience in aeronautical, spatial, defence or automotive industry, as well as a knowledge of the standards DO-178, ARP4754 or ISO26262, is a plus. English and French (spoken and written) Please get in touch for further details.
Senior Electrical Design Engineer - Aviation/Aerospace Swindon, M4 corridor Contract, outside IR35 Electrical systems, electrical design, systems design, power distribution systems (PDS), Senior Electrical Design Engineer is required by buoyant aerospace/aviation company operating in the M4 Corridor. Key skills and specialism in electrical systems design for high power electrical systems, working experience within an aerospace/aviation industry setting is essential Key skills/experience: Main expertise will be focused on delivering electrical power systems design, performance & safety Design & Developer Power Distribution Systems (PDS) - repairs/mods using CAD - Siemens - software aviation/aerospace industry exposure 8+ years experience in relevant industry and skills specialism available within 0-2 weeks, max Key duties: Design, Analysis, test, inspect - electrical power systems What you'll get: Short, precise interview process Working with a key market player Cutting edge tech Apply directly here with your CV and up to date contacts details in order to be considered for this great contract opportunity.
15/05/2024
Project-based
Senior Electrical Design Engineer - Aviation/Aerospace Swindon, M4 corridor Contract, outside IR35 Electrical systems, electrical design, systems design, power distribution systems (PDS), Senior Electrical Design Engineer is required by buoyant aerospace/aviation company operating in the M4 Corridor. Key skills and specialism in electrical systems design for high power electrical systems, working experience within an aerospace/aviation industry setting is essential Key skills/experience: Main expertise will be focused on delivering electrical power systems design, performance & safety Design & Developer Power Distribution Systems (PDS) - repairs/mods using CAD - Siemens - software aviation/aerospace industry exposure 8+ years experience in relevant industry and skills specialism available within 0-2 weeks, max Key duties: Design, Analysis, test, inspect - electrical power systems What you'll get: Short, precise interview process Working with a key market player Cutting edge tech Apply directly here with your CV and up to date contacts details in order to be considered for this great contract opportunity.
Position: Stress Engineer (Repairs) Pay rate: £44 p/h inside IR35. location: Filton, UK Role Type: 12-Month Contract with extension Position: Hybrid (60% Onsite, 40% Remote) IO Associates seeks a Stress Engineer for the Filton site. Join a global aerospace leader specializing in commercial and military aircraft, helicopters, defense, and space sectors . This role offers a chance to contribute to innovative projects within a dynamic team shaping the future of aviation and space systems. Responsibilities Utilizing Company-sanctioned methods and tools for conducting structural static strength analysis of repairs. Generating and consolidating justification reports alongside relevant engineering documentation. Collaborating closely with proficient designers to devise optimal repair solutions. Skills Required Aerospace Engineering degree (or equivalent) with relevant experience. Skilled in static analysis of aircraft structures using diverse methods. Proficient in fundamental static stress analysis methods and capable of enhancement. Familiarity with static strength analysis tools like ISAMI and Mathcad. Experienced in compiling static strength justification reports to Company standards. This is an excellent opportunity to work for an international company that encourages and facilitates personal growth. PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role. Please apply or share your updated CV at email:
15/05/2024
Project-based
Position: Stress Engineer (Repairs) Pay rate: £44 p/h inside IR35. location: Filton, UK Role Type: 12-Month Contract with extension Position: Hybrid (60% Onsite, 40% Remote) IO Associates seeks a Stress Engineer for the Filton site. Join a global aerospace leader specializing in commercial and military aircraft, helicopters, defense, and space sectors . This role offers a chance to contribute to innovative projects within a dynamic team shaping the future of aviation and space systems. Responsibilities Utilizing Company-sanctioned methods and tools for conducting structural static strength analysis of repairs. Generating and consolidating justification reports alongside relevant engineering documentation. Collaborating closely with proficient designers to devise optimal repair solutions. Skills Required Aerospace Engineering degree (or equivalent) with relevant experience. Skilled in static analysis of aircraft structures using diverse methods. Proficient in fundamental static stress analysis methods and capable of enhancement. Familiarity with static strength analysis tools like ISAMI and Mathcad. Experienced in compiling static strength justification reports to Company standards. This is an excellent opportunity to work for an international company that encourages and facilitates personal growth. PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role. Please apply or share your updated CV at email:
World Class Defence Organisation based in Portsmouth is currently looking to recruit a C++ Embedded Software Engineer subcontractor on an initial 6 month contract. Hourly Rate: £70.00 (Umbrella) Contract Duration: 6 months initially and then ongoing thereafter C++ Embedded Software Engineer Job Description: The team is undertaking the design and implementation of a satellite communications Software Defined Radio (SDR) modem. You will be part of a small multi-disciplinary team containing software, system, firmware and infrastructure engineers. There will be scope in the future to work on further developments as project needs arise. You will research and develop aspects of modem products and associated communications systems, using your experience in software within complex systems. Skills/Experience Required Essential experience with - Modern C++ software engineering for target Linux platforms to a high standard Developing using Eclipse CDT running on a Linux based operating system Device management interfaces (eg SNMP, Web) for design, implementation and test Git for version control Inter-process communication and techniques Unit and integration test tools (eg Google Test, Robot Framework) Atlassian toolset (eg Jira, Confluence, BitBucket) Desirable skills - Agile or Scrum working environment experience would be very beneficial System and software modelling tools such as Enterprise Architect (SysML/UML) User interface design, implementation and test using HTML, CSS and JavaScript Similar industries you could come from: Space Aerospace Communications Radar
15/05/2024
Project-based
World Class Defence Organisation based in Portsmouth is currently looking to recruit a C++ Embedded Software Engineer subcontractor on an initial 6 month contract. Hourly Rate: £70.00 (Umbrella) Contract Duration: 6 months initially and then ongoing thereafter C++ Embedded Software Engineer Job Description: The team is undertaking the design and implementation of a satellite communications Software Defined Radio (SDR) modem. You will be part of a small multi-disciplinary team containing software, system, firmware and infrastructure engineers. There will be scope in the future to work on further developments as project needs arise. You will research and develop aspects of modem products and associated communications systems, using your experience in software within complex systems. Skills/Experience Required Essential experience with - Modern C++ software engineering for target Linux platforms to a high standard Developing using Eclipse CDT running on a Linux based operating system Device management interfaces (eg SNMP, Web) for design, implementation and test Git for version control Inter-process communication and techniques Unit and integration test tools (eg Google Test, Robot Framework) Atlassian toolset (eg Jira, Confluence, BitBucket) Desirable skills - Agile or Scrum working environment experience would be very beneficial System and software modelling tools such as Enterprise Architect (SysML/UML) User interface design, implementation and test using HTML, CSS and JavaScript Similar industries you could come from: Space Aerospace Communications Radar
Electronics Engineer Alton, Hampshire £50k - £70K DOE Role details: We are working with an innovative Space company with world class expertise in Spacecraft. They design, build and operate space missions for global customers. They are looking for an Electronics Engineer to support on a range of activities from detailed design, development, documentation and test through to wider spacecraft support. Responsibilities: Derivation and management of technical requirements from Mission and System Level to subsystem and equipment level Design, development, prototyping, build and test of electronic circuits and systems from initial requirements through to launch and in-orbit operations Detailed design activities including Schematic production; Selection and procurement of relevant components and assemblies to support design and development activities; ECAD design either directly or managing a specialist Produce electronics documentation, eg SoW, Design Document, Interface Control Document, Test Plans Requirements: Educated to at least degree - level or equivalent in a relevant scientific or engineering discipline Technical delivery of complex electrical/electronic systems, ideally on a satellite programme (or in the Aerospace or automotive sector) Proficient in use of appropriate technical tools (eg Altium, OrCAD, PSpice) Experience in documentation for space/aerospace projects (highly desirable) Experience in testing and test automation Benefits: 37.5 hour working week, Flexible working, 30 days holiday 10% Pension, Bonus Life insurance, Private medical, Income protection Eligibility: To be considered for the role, you must have permanent UK residency status.
14/05/2024
Full time
Electronics Engineer Alton, Hampshire £50k - £70K DOE Role details: We are working with an innovative Space company with world class expertise in Spacecraft. They design, build and operate space missions for global customers. They are looking for an Electronics Engineer to support on a range of activities from detailed design, development, documentation and test through to wider spacecraft support. Responsibilities: Derivation and management of technical requirements from Mission and System Level to subsystem and equipment level Design, development, prototyping, build and test of electronic circuits and systems from initial requirements through to launch and in-orbit operations Detailed design activities including Schematic production; Selection and procurement of relevant components and assemblies to support design and development activities; ECAD design either directly or managing a specialist Produce electronics documentation, eg SoW, Design Document, Interface Control Document, Test Plans Requirements: Educated to at least degree - level or equivalent in a relevant scientific or engineering discipline Technical delivery of complex electrical/electronic systems, ideally on a satellite programme (or in the Aerospace or automotive sector) Proficient in use of appropriate technical tools (eg Altium, OrCAD, PSpice) Experience in documentation for space/aerospace projects (highly desirable) Experience in testing and test automation Benefits: 37.5 hour working week, Flexible working, 30 days holiday 10% Pension, Bonus Life insurance, Private medical, Income protection Eligibility: To be considered for the role, you must have permanent UK residency status.
NEW CONTRACT OPPORTUNITY AVAILABLE FOR A MODELLING AND SIMULATION ENGINEER IN FARNBOROUGH Searchability NS&D has a contract opportunity for an Modelling and Simulation Engineer with a weapons background to work across an exciting range of projects Must have active SC Clearance or be eligible to attain SC Clearance Competitive market rate - Inside IR35 For more details please call me or email (see below) WHAT WILL THE MODELLING AND SIMULATION ENGINEER BE DOING? The role will be to undertake M&S tasks in order to provide expertise in developing Threat Models. You will develop fit-for-purpose threat data & models in support of the programme through to Integrated Test, Evaluation and Acceptance activities. SKILLS & EXPERIENCE REQUIRED: Weapons Background Parametric/Analytical modelling Defence related systems engineering Defence related systems analysis Experience and proven history of CAD related activity Demonstrable understanding of engineering tools such MATLAB/Simulink Experience in QA processes Defence/Aerospace background Degree qualified in a Physics/Engineering based subject Successful applicant must have active SC Clearance or be eligible to attain SC Clearance TO BE CONSIDERED . Please either apply by clicking online or emailing me directly to (see below) - I can make myself available outside of normal working hours to suit from 7am until 10pm. If unavailable, please leave a message and either myself or one of my colleagues will respond. By applying for this role, you express consent for us to process & submit (subject to required skills) your application to our client in conjunction with this vacancy only. I look forward to hearing from you. MODELLING AND SIMULATION ENGINEER KEY SKILLS: MODELLING AND SIMULATION ENGINEER/MODELLING/SIMULATION/SIMULINK/MATLAB/AEROSPACE/NATIONAL SECURITY/DEFENCE/GOVERNMENT/ SECURITY CLEARED/SECURITY CLEARANCE/SECURITY CHECK/SC CLEARED/SC CLEARANCE
13/05/2024
Project-based
NEW CONTRACT OPPORTUNITY AVAILABLE FOR A MODELLING AND SIMULATION ENGINEER IN FARNBOROUGH Searchability NS&D has a contract opportunity for an Modelling and Simulation Engineer with a weapons background to work across an exciting range of projects Must have active SC Clearance or be eligible to attain SC Clearance Competitive market rate - Inside IR35 For more details please call me or email (see below) WHAT WILL THE MODELLING AND SIMULATION ENGINEER BE DOING? The role will be to undertake M&S tasks in order to provide expertise in developing Threat Models. You will develop fit-for-purpose threat data & models in support of the programme through to Integrated Test, Evaluation and Acceptance activities. SKILLS & EXPERIENCE REQUIRED: Weapons Background Parametric/Analytical modelling Defence related systems engineering Defence related systems analysis Experience and proven history of CAD related activity Demonstrable understanding of engineering tools such MATLAB/Simulink Experience in QA processes Defence/Aerospace background Degree qualified in a Physics/Engineering based subject Successful applicant must have active SC Clearance or be eligible to attain SC Clearance TO BE CONSIDERED . Please either apply by clicking online or emailing me directly to (see below) - I can make myself available outside of normal working hours to suit from 7am until 10pm. If unavailable, please leave a message and either myself or one of my colleagues will respond. By applying for this role, you express consent for us to process & submit (subject to required skills) your application to our client in conjunction with this vacancy only. I look forward to hearing from you. MODELLING AND SIMULATION ENGINEER KEY SKILLS: MODELLING AND SIMULATION ENGINEER/MODELLING/SIMULATION/SIMULINK/MATLAB/AEROSPACE/NATIONAL SECURITY/DEFENCE/GOVERNMENT/ SECURITY CLEARED/SECURITY CLEARANCE/SECURITY CHECK/SC CLEARED/SC CLEARANCE
Position: Process Engineer Pay rate: £33.00 p/h inside IR35. location: Filton, UK Role Type: Contract until Dec 2024 with extension Position: Hybrid (60% Onsite, 40% Remote) IO Associates seeks a Process Engineer for the Filton site. Join a global aerospace leader specializing in commercial and military aircraft, helicopters, defense, and space sectors. This role offers a chance to contribute to innovative projects within a dynamic team shaping the future of aviation and space systems. Responsibilities Oversee wing integration across design and operational phases through meticulous work order planning. Collaborate with a multi-functional team (MFT) to provide lineside support for failures. Support Capex projects within the wider team. Strategically balance critical paths and stations while focusing on technical aspects. Skills Required Proficient in aircraft product design, assembly, and procedural processes. Strong written, verbal, and communication skills. Competent in computer skills, including familiarity with Google G Suite and SAP. Experienced in working with SAP at a proficient level. This is an excellent opportunity to work for an international company that encourages and facilitates personal growth. PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role. Please apply or share your updated CV at email:
13/05/2024
Project-based
Position: Process Engineer Pay rate: £33.00 p/h inside IR35. location: Filton, UK Role Type: Contract until Dec 2024 with extension Position: Hybrid (60% Onsite, 40% Remote) IO Associates seeks a Process Engineer for the Filton site. Join a global aerospace leader specializing in commercial and military aircraft, helicopters, defense, and space sectors. This role offers a chance to contribute to innovative projects within a dynamic team shaping the future of aviation and space systems. Responsibilities Oversee wing integration across design and operational phases through meticulous work order planning. Collaborate with a multi-functional team (MFT) to provide lineside support for failures. Support Capex projects within the wider team. Strategically balance critical paths and stations while focusing on technical aspects. Skills Required Proficient in aircraft product design, assembly, and procedural processes. Strong written, verbal, and communication skills. Competent in computer skills, including familiarity with Google G Suite and SAP. Experienced in working with SAP at a proficient level. This is an excellent opportunity to work for an international company that encourages and facilitates personal growth. PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role. Please apply or share your updated CV at email:
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
13/05/2024
Project-based
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.