Quality Engineer Coventry Full time Permanent Role Our client, a world-leading automotive engineering and manufacturing company based in Coventry, is looking to hire a Quality Engineer on a Full time permanent basis. This role presents an excellent opportunity to join the quality team of an innovative industry leader, which is equipped with state-of-the-art manufacturing technologies and processes. As the Quality Engineer, your core objective will be to ensure effective quality control throughout the manufacturing operations. Key duties and responsibilities include: Developing and implementing inspection plans, procedures, performance standards, and control methodologies to adhere to internal quality guidelines and industry regulations Conducting risk-based thinking assessments on operational processes to determine quality assurance requirements Performing process capability and analytical studies to identify areas for defect reduction and quality improvement Working closely with cross-functional teams including manufacturing, procurement, and suppliers to drive quality culture throughout the supply chain ecosystem Capturing, monitoring, and analysing quality data to identify trends and deviations from set targets Driving continuous improvement projects by employing methods like 8D problem-solving and Six Sigma Creating management reports and dashboards that communicate key quality metrics to senior leadership Staying current with advancements in quality engineering disciplines, inspection technologies, automation solutions etc. The ideal candidate will have hands-on experience working within quality-focused manufacturing operations, preferably in the automotive industry. You should also demonstrate sharp analytical abilities, communication skills, leadership qualities and a passion for devising quality assurance strategies. This is a fantastic opportunity to take on an important quality role within a pioneering mobility manufacturer. If you meet the above profile and are keen to apply, please send your CV to (see below)
16/05/2024
Full time
Quality Engineer Coventry Full time Permanent Role Our client, a world-leading automotive engineering and manufacturing company based in Coventry, is looking to hire a Quality Engineer on a Full time permanent basis. This role presents an excellent opportunity to join the quality team of an innovative industry leader, which is equipped with state-of-the-art manufacturing technologies and processes. As the Quality Engineer, your core objective will be to ensure effective quality control throughout the manufacturing operations. Key duties and responsibilities include: Developing and implementing inspection plans, procedures, performance standards, and control methodologies to adhere to internal quality guidelines and industry regulations Conducting risk-based thinking assessments on operational processes to determine quality assurance requirements Performing process capability and analytical studies to identify areas for defect reduction and quality improvement Working closely with cross-functional teams including manufacturing, procurement, and suppliers to drive quality culture throughout the supply chain ecosystem Capturing, monitoring, and analysing quality data to identify trends and deviations from set targets Driving continuous improvement projects by employing methods like 8D problem-solving and Six Sigma Creating management reports and dashboards that communicate key quality metrics to senior leadership Staying current with advancements in quality engineering disciplines, inspection technologies, automation solutions etc. The ideal candidate will have hands-on experience working within quality-focused manufacturing operations, preferably in the automotive industry. You should also demonstrate sharp analytical abilities, communication skills, leadership qualities and a passion for devising quality assurance strategies. This is a fantastic opportunity to take on an important quality role within a pioneering mobility manufacturer. If you meet the above profile and are keen to apply, please send your CV to (see below)
CNC MILLER SETTER OPERATOR REPORTING TO: PRODUCTION MANAGER Due to my client's continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Miller Setter Operator to support Production. My client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, my client can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. At my client, we believe that good customer service is every bit as important as a strong product. DUTIES AND RESPONSIBILITIES INCLUDE: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Setting and operating milling machines to required tolerance Use of manual measuring equipment Tool setting on CNC Machines Programme proving of new products as and when required. Actively provide details of changes to correct/improve programs that go towards improving machining performance Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Use of Fanuc controls Tapping and Deburring where required Help and assist other members of the milling cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the [COMPANY] Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required THE IDEAL CANDIDATE MUST HAVE/SKILLS REQUIRED: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player EXPERIENCE IN THE FOLLOWING AREAS WILL BE REQUIRED: 3-5 Years relevant production experience Experience of Milling Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs DESIRABLE: Experience of a high-quality Manufacturing environment Have previously run Matsuura 3-4-5 axis milling machines or similar Minor Fanuc programme editing Excellent communication skills Good time management
16/05/2024
Full time
CNC MILLER SETTER OPERATOR REPORTING TO: PRODUCTION MANAGER Due to my client's continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Miller Setter Operator to support Production. My client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, my client can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. At my client, we believe that good customer service is every bit as important as a strong product. DUTIES AND RESPONSIBILITIES INCLUDE: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Setting and operating milling machines to required tolerance Use of manual measuring equipment Tool setting on CNC Machines Programme proving of new products as and when required. Actively provide details of changes to correct/improve programs that go towards improving machining performance Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Use of Fanuc controls Tapping and Deburring where required Help and assist other members of the milling cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the [COMPANY] Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required THE IDEAL CANDIDATE MUST HAVE/SKILLS REQUIRED: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player EXPERIENCE IN THE FOLLOWING AREAS WILL BE REQUIRED: 3-5 Years relevant production experience Experience of Milling Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs DESIRABLE: Experience of a high-quality Manufacturing environment Have previously run Matsuura 3-4-5 axis milling machines or similar Minor Fanuc programme editing Excellent communication skills Good time management
Job Title: CNC Grinder Setter Operator Department: Production Reporting to: Production Supervisor Due to their continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Grinder Setter Operator to support Production. Our client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, they can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. We believe that good customer service is every bit as important as a strong product. Duties and responsibilities include: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Use of manual measuring equipment Produce programmes on the machine as and when new products arrive Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Machines include: Jones & Shipman 1300X, Studer S40, Studer S145, Jones & Shipman Techmaster 634 surface grinder Actively provide details of changes to correct/improve production of parts towards improving machining performance Help and assist other members of the grinding cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required The ideal candidate must have/skills required: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player Experience in the following areas will be required: 3-5 Years relevant production experience Experience of Grinding Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs Desirable: Experience of a high-quality Manufacturing environment Writing & editing CNC Grinding programs. Excellent communication skills Good time management
16/05/2024
Full time
Job Title: CNC Grinder Setter Operator Department: Production Reporting to: Production Supervisor Due to their continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Grinder Setter Operator to support Production. Our client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, they can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. We believe that good customer service is every bit as important as a strong product. Duties and responsibilities include: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Use of manual measuring equipment Produce programmes on the machine as and when new products arrive Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Machines include: Jones & Shipman 1300X, Studer S40, Studer S145, Jones & Shipman Techmaster 634 surface grinder Actively provide details of changes to correct/improve production of parts towards improving machining performance Help and assist other members of the grinding cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required The ideal candidate must have/skills required: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player Experience in the following areas will be required: 3-5 Years relevant production experience Experience of Grinding Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs Desirable: Experience of a high-quality Manufacturing environment Writing & editing CNC Grinding programs. Excellent communication skills Good time management
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
16/05/2024
Full time
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
Overview Reporting to the Process Engineering Manager, the Production Support Engineer is responsible for ensuring optimal OEE (Overall Equipment Effectiveness), through effective preventative maintenance and corrective actions to reduce equipment down time, in line with the expectations of Operations. Additionally, providing engineering support to Operations and ensuring continuous improvement. The successful candidate will join the Process Engineering team, reporting to the Process Engineering Manager. This team is comprised of 4 employees. Experience: Electronics: Candidate will have detailed knowledge of repair fault finding and minor design. Manufacturing: The candidate has previously worked in a high-precision electronics manufacturing environment supporting and repairing equipment and systems. IT skills: Computer literate; with experience of using Microsoft windows software to complete work done reports and monitor equipment usage (i.e. word, excel etc.) Continuous improvement and Problem- Solving: Candidates will be familiar with making improvements to equipment / systems and services to improve utilisation and operational/production productivity and throughput. You will be familiar of the creation and implementation of lean working processes and able to demonstrate a structured approach to problem-solving, root-cause analysis. Ability to construct an FMEA would be highly desirable Documentation: The candidate has the ability to interpret drawings, specifications, work instructions and create new ones if required. Maintenance of Equipment: You will be able to demonstrate their ability to support and repair equipment and systems. Mechanical Exposure: Have worked in an environment with some mechanical requirement (assembling items etc). ERP Systems: Exposure to ERP systems. Manufacturing: Experience in electronic instrumentation. Overall Equipment Effectiveness (OEE): Able to track and monitor equipment utilisation and reliability to identify preventative maintenance measures to improve reliability and up-time. Understand measuring equipment operation and ensuring optimal overall equipment effectiveness. H&S: Knowledge of Health and Safety at work. Education: HNC or above in electronics, we will consider candidates who are qualified by experience. Normal hours of work will be 08:00 - 16:15 Monday to Thursday, 08:00 - 15;00 on Friday with half an hour for lunch. This role is not hybrid Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
15/05/2024
Full time
Overview Reporting to the Process Engineering Manager, the Production Support Engineer is responsible for ensuring optimal OEE (Overall Equipment Effectiveness), through effective preventative maintenance and corrective actions to reduce equipment down time, in line with the expectations of Operations. Additionally, providing engineering support to Operations and ensuring continuous improvement. The successful candidate will join the Process Engineering team, reporting to the Process Engineering Manager. This team is comprised of 4 employees. Experience: Electronics: Candidate will have detailed knowledge of repair fault finding and minor design. Manufacturing: The candidate has previously worked in a high-precision electronics manufacturing environment supporting and repairing equipment and systems. IT skills: Computer literate; with experience of using Microsoft windows software to complete work done reports and monitor equipment usage (i.e. word, excel etc.) Continuous improvement and Problem- Solving: Candidates will be familiar with making improvements to equipment / systems and services to improve utilisation and operational/production productivity and throughput. You will be familiar of the creation and implementation of lean working processes and able to demonstrate a structured approach to problem-solving, root-cause analysis. Ability to construct an FMEA would be highly desirable Documentation: The candidate has the ability to interpret drawings, specifications, work instructions and create new ones if required. Maintenance of Equipment: You will be able to demonstrate their ability to support and repair equipment and systems. Mechanical Exposure: Have worked in an environment with some mechanical requirement (assembling items etc). ERP Systems: Exposure to ERP systems. Manufacturing: Experience in electronic instrumentation. Overall Equipment Effectiveness (OEE): Able to track and monitor equipment utilisation and reliability to identify preventative maintenance measures to improve reliability and up-time. Understand measuring equipment operation and ensuring optimal overall equipment effectiveness. H&S: Knowledge of Health and Safety at work. Education: HNC or above in electronics, we will consider candidates who are qualified by experience. Normal hours of work will be 08:00 - 16:15 Monday to Thursday, 08:00 - 15;00 on Friday with half an hour for lunch. This role is not hybrid Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
Process Engineer £33 per hour. Umbrella. Certain Advantage is hiring for a Process Engineer based in Filton. This role is on a 6-month contract basis and is office based. We're working with a business that's currently working on the embodiment of providing ME support to a wide range of projects that could include A400M, A350, Additive Manufacturing and R&T Programs. Does this sound like your next career move? If you're ambitious to grow, this may be your next role. The role: This role is for a dynamic Process Engineer who has awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation, and sustainable growth. Wing integration through work order planning, from design through to operations Lineside support for failures with MFT (Multi-functional team) Support wider team with respect to Capex projects. Technical and Balancing Critical path and station. Identify and share best practices across stations/CDTs/BME (Business Methods Engineer to Plants/FALs) to improve efficiency. Manage performance: Propose improvement based on analysis of manufacturing performance and disruptions PARETO and Improve Process and Serial Allocated time via VA/NVA analysis and shop floor process observation. The individual We are looking for people who can show: Understanding of aircraft product design, assembly and procedural processes Good Written, verbal and communication skills Good level of computer skills, preferably Google "G Suite", SAP etc. Good level of SAP experience. Experience in application of Export Control, Cyber Security and Health/Safety legislation into manufacture. Does this sound like your next career move? Apply today! (Reference: 72955) Working with Certain Advantage We go the extra mile to find the best people for the job. If you're hunting for a role where you can make an impact and grow your career, we'll work with you to find it. We work with businesses across the UK to find the best people in Finance, Marketing, IT and Engineering.
13/05/2024
Project-based
Process Engineer £33 per hour. Umbrella. Certain Advantage is hiring for a Process Engineer based in Filton. This role is on a 6-month contract basis and is office based. We're working with a business that's currently working on the embodiment of providing ME support to a wide range of projects that could include A400M, A350, Additive Manufacturing and R&T Programs. Does this sound like your next career move? If you're ambitious to grow, this may be your next role. The role: This role is for a dynamic Process Engineer who has awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation, and sustainable growth. Wing integration through work order planning, from design through to operations Lineside support for failures with MFT (Multi-functional team) Support wider team with respect to Capex projects. Technical and Balancing Critical path and station. Identify and share best practices across stations/CDTs/BME (Business Methods Engineer to Plants/FALs) to improve efficiency. Manage performance: Propose improvement based on analysis of manufacturing performance and disruptions PARETO and Improve Process and Serial Allocated time via VA/NVA analysis and shop floor process observation. The individual We are looking for people who can show: Understanding of aircraft product design, assembly and procedural processes Good Written, verbal and communication skills Good level of computer skills, preferably Google "G Suite", SAP etc. Good level of SAP experience. Experience in application of Export Control, Cyber Security and Health/Safety legislation into manufacture. Does this sound like your next career move? Apply today! (Reference: 72955) Working with Certain Advantage We go the extra mile to find the best people for the job. If you're hunting for a role where you can make an impact and grow your career, we'll work with you to find it. We work with businesses across the UK to find the best people in Finance, Marketing, IT and Engineering.
Microsoft Dynamics 365 - Finance & Supply Chain Management Hybrid/Remote Roles and Responsibilities: As a D365 F&SCM Solutions Architect specialising in Microsoft Business Application Technology, you will lead the development of all aspects of the technical/functional architecture and design for complex change projects/programmes. This will involve developing high-level designs/solution blueprints and managing their translation into low-level designs. As a Solution Architect, you will be expected to work concurrently on a portfolio of programmes, projects, and consultancy engagements. Work alongside technical architects and integration leads to craft power App solutions for interactions within D365 applications. Keep Senior Developers/Integration Leads/Technical Architects/Project Managers in the loop with regular progress updates and insights into any risks or challenges. Dive into technical design documents and integration design documents to ensure developments align with requirements. Contribute to development activities within assigned project teams, addressing known integrations and technical gaps. Adhere to best practices and guidelines, ensuring all code undergoes peer review and is thoroughly documented. Support regular quality audits for Implementation Programmers related to D365 F&SCM. Participate in routine meetings with technical team leads to share updates on workload and performance. Understand the performance implications of development techniques to be employed. Raise any risks or concerns promptly to senior team members. Preferred Qualifications: Microsoft Dynamics 365 Certifications Bachelor's Degree in Computer Science, Computer Engineering, or a related field. Required Skills and Experience. Experience in business processes including Finance, Manufacturing, Retail and Supply Chain. Dynamics 365 F&SCM/Finance and Operations. Proficiency in Power Automate. Enterprise Architecture principles and standards. Proficiency in T SQL Scripting/development. Ability to write detailed technical documentation clearly and concisely. Understanding of security design principles for D365 F&SCM and Azure components, including authorisation mechanisms. Desirable Skills: Microsoft Certifications Familiarity with Azure Data Factory. knowledge of TFVC/Git and development control rules/processes. Familiarity with C# code. Proficient in related technologies such as Microsoft Stack, Office 365, SSRS, SSIS, SharePoint, Microsoft Azure and Power BI Requirement: You must have the following visas/right to work to be eligible for this position: British Citizen, ILR, Dependant Visa, Pre-settled status etc. You must be UK-based to apply for this role. *If you don't have the right to work in the UK or are not located in the UK, you will be automatically rejected from the process due to client requirements. Apply Today!
13/05/2024
Full time
Microsoft Dynamics 365 - Finance & Supply Chain Management Hybrid/Remote Roles and Responsibilities: As a D365 F&SCM Solutions Architect specialising in Microsoft Business Application Technology, you will lead the development of all aspects of the technical/functional architecture and design for complex change projects/programmes. This will involve developing high-level designs/solution blueprints and managing their translation into low-level designs. As a Solution Architect, you will be expected to work concurrently on a portfolio of programmes, projects, and consultancy engagements. Work alongside technical architects and integration leads to craft power App solutions for interactions within D365 applications. Keep Senior Developers/Integration Leads/Technical Architects/Project Managers in the loop with regular progress updates and insights into any risks or challenges. Dive into technical design documents and integration design documents to ensure developments align with requirements. Contribute to development activities within assigned project teams, addressing known integrations and technical gaps. Adhere to best practices and guidelines, ensuring all code undergoes peer review and is thoroughly documented. Support regular quality audits for Implementation Programmers related to D365 F&SCM. Participate in routine meetings with technical team leads to share updates on workload and performance. Understand the performance implications of development techniques to be employed. Raise any risks or concerns promptly to senior team members. Preferred Qualifications: Microsoft Dynamics 365 Certifications Bachelor's Degree in Computer Science, Computer Engineering, or a related field. Required Skills and Experience. Experience in business processes including Finance, Manufacturing, Retail and Supply Chain. Dynamics 365 F&SCM/Finance and Operations. Proficiency in Power Automate. Enterprise Architecture principles and standards. Proficiency in T SQL Scripting/development. Ability to write detailed technical documentation clearly and concisely. Understanding of security design principles for D365 F&SCM and Azure components, including authorisation mechanisms. Desirable Skills: Microsoft Certifications Familiarity with Azure Data Factory. knowledge of TFVC/Git and development control rules/processes. Familiarity with C# code. Proficient in related technologies such as Microsoft Stack, Office 365, SSRS, SSIS, SharePoint, Microsoft Azure and Power BI Requirement: You must have the following visas/right to work to be eligible for this position: British Citizen, ILR, Dependant Visa, Pre-settled status etc. You must be UK-based to apply for this role. *If you don't have the right to work in the UK or are not located in the UK, you will be automatically rejected from the process due to client requirements. Apply Today!
Mes Author to work for a Pharmaceutical company The role is as follows Mes Author role Remote - There is a chance of 2 weeks onsite anywhere in the world (this will be fully expensed) Outside ir35 Rate - TBC 1 stage interview process next week Start - Late June/Early July 6 months contract Purpose: -To maintain the POMSnet environment; to author & maintain recipes & worksheets for API & DP manufacturing; and also author and maintain the recipes & BOMs in SAP. - To operate as a team member within the MES team in the implementation and maintenance of the MES & SAP system for the API & DP buildings. Responsibilities: Liaise with Manufacturing and Quality to close out MES execution exceptions. Troubleshoot and provide solutions for all MES & SAP problems in recipe execution and recipe authoring. Liaise with quality to provide approved documentation for all MES system changes. Design, create, write and execute system and test documentation to a high quality standard. Design, create, write and/or make all required changes to MES & SAP Recipes, worksheets, equipment and material spec's including phase transition logic to a high quality standard. Design, create, write and/or make all required changes to ensure cleaning, equipment and product procedures (CIs, CIRs, MIs, MIRs and SOPs) are aligned to MES processes and vice versa. Design, create, write and provide training for all other site personnel on their related MES roles. Participate in MES knowledge exchanges, MES Governance meetings, GMES Technical Review Board (TRB) Meetings, and manage issues, work-around and fixes identified. Work closely with IT regarding upgrades, patching, hardware support, security and system access. Liaise with GMES on Sligo required system improvements. Provide support to other MES system users as required to ensure business continuity. Participate in NPI projects from initiation to ensure MES system or hardware requirements are taken into consideration. Keep other recipe authors up to date on MES changes. Documentation of all activities in line with cGMP requirements. Cross training within the team and training of new team members. Participation in continuous improvement programs to implement improvements in the quality, safety, environmental and production systems. Adheres to and supports all EHS & E standards, procedures and policies. Supervision Received -The position will report directly to the Global process owner, - Goals are reviewed on a regular basis and formal performance reviews are carried out once per year. Supervision Provided - No direct reports. - Maintains regular contact with support functions on site. Qualifications: Diploma qualification in suitable science/engineering course and/or suitable experience. Job/Technical Skills A minimum of 5 years' experience in Batch processing operations in an FDA/HPRA regulated industry. Strong knowledge of cGMP and regulatory requirements relating to the pharmaceutical industry is required. Experience in the operating in a highly automated environment and safe handling of dangerous chemicals is required for this role. A good knowledge of IT systems/MES is required for this role. Cognitive/Business Skills The position requires a high level of attention to detail and mental concentration, to ensure total compliance with procedures at all times. The position requires proven problem solving skills, and the ability to adapt to new manufacturing process on a regular basis. The position requires proven technical skills, to ensure the person can cope with the technical demands of the position at all times. Requires innovative thinking, where new and untested solutions are proposed, demonstrated and implemented on a regular basis. Must be results driven striving to meet all targets and metric standards as set by site/department and division leaders. Requires total commitment to quality and maintaining a high standard of work at all times. Demonstrates the highest levels of integrity and a strong work ethic at all times. Strong communication skills both verbal and written are required for the execution of this role. Strong interpersonal skills are required. Understands and Supports the principles of Perfect Performance. Ownership/Accountability This position is responsible for ensuring the smooth running of the MES system and ensuring availability to manufacturing at all times. The position has a high level of autonomy and individuals are expected to work on their own initiative. Shows a high level of tenacity to ensure closure of issues. This position is crucial in maintaining the compliance of validated systems ensuring that any changes or modifications are documented and actioned. Demonstrates an ethos of Right First Time at all times. Adheres to and follows all procedures policies and guidelines ensuring compliance with cGMP and HPRA/FDA regulations and company policies, procedures and guidelines.
13/05/2024
Project-based
Mes Author to work for a Pharmaceutical company The role is as follows Mes Author role Remote - There is a chance of 2 weeks onsite anywhere in the world (this will be fully expensed) Outside ir35 Rate - TBC 1 stage interview process next week Start - Late June/Early July 6 months contract Purpose: -To maintain the POMSnet environment; to author & maintain recipes & worksheets for API & DP manufacturing; and also author and maintain the recipes & BOMs in SAP. - To operate as a team member within the MES team in the implementation and maintenance of the MES & SAP system for the API & DP buildings. Responsibilities: Liaise with Manufacturing and Quality to close out MES execution exceptions. Troubleshoot and provide solutions for all MES & SAP problems in recipe execution and recipe authoring. Liaise with quality to provide approved documentation for all MES system changes. Design, create, write and execute system and test documentation to a high quality standard. Design, create, write and/or make all required changes to MES & SAP Recipes, worksheets, equipment and material spec's including phase transition logic to a high quality standard. Design, create, write and/or make all required changes to ensure cleaning, equipment and product procedures (CIs, CIRs, MIs, MIRs and SOPs) are aligned to MES processes and vice versa. Design, create, write and provide training for all other site personnel on their related MES roles. Participate in MES knowledge exchanges, MES Governance meetings, GMES Technical Review Board (TRB) Meetings, and manage issues, work-around and fixes identified. Work closely with IT regarding upgrades, patching, hardware support, security and system access. Liaise with GMES on Sligo required system improvements. Provide support to other MES system users as required to ensure business continuity. Participate in NPI projects from initiation to ensure MES system or hardware requirements are taken into consideration. Keep other recipe authors up to date on MES changes. Documentation of all activities in line with cGMP requirements. Cross training within the team and training of new team members. Participation in continuous improvement programs to implement improvements in the quality, safety, environmental and production systems. Adheres to and supports all EHS & E standards, procedures and policies. Supervision Received -The position will report directly to the Global process owner, - Goals are reviewed on a regular basis and formal performance reviews are carried out once per year. Supervision Provided - No direct reports. - Maintains regular contact with support functions on site. Qualifications: Diploma qualification in suitable science/engineering course and/or suitable experience. Job/Technical Skills A minimum of 5 years' experience in Batch processing operations in an FDA/HPRA regulated industry. Strong knowledge of cGMP and regulatory requirements relating to the pharmaceutical industry is required. Experience in the operating in a highly automated environment and safe handling of dangerous chemicals is required for this role. A good knowledge of IT systems/MES is required for this role. Cognitive/Business Skills The position requires a high level of attention to detail and mental concentration, to ensure total compliance with procedures at all times. The position requires proven problem solving skills, and the ability to adapt to new manufacturing process on a regular basis. The position requires proven technical skills, to ensure the person can cope with the technical demands of the position at all times. Requires innovative thinking, where new and untested solutions are proposed, demonstrated and implemented on a regular basis. Must be results driven striving to meet all targets and metric standards as set by site/department and division leaders. Requires total commitment to quality and maintaining a high standard of work at all times. Demonstrates the highest levels of integrity and a strong work ethic at all times. Strong communication skills both verbal and written are required for the execution of this role. Strong interpersonal skills are required. Understands and Supports the principles of Perfect Performance. Ownership/Accountability This position is responsible for ensuring the smooth running of the MES system and ensuring availability to manufacturing at all times. The position has a high level of autonomy and individuals are expected to work on their own initiative. Shows a high level of tenacity to ensure closure of issues. This position is crucial in maintaining the compliance of validated systems ensuring that any changes or modifications are documented and actioned. Demonstrates an ethos of Right First Time at all times. Adheres to and follows all procedures policies and guidelines ensuring compliance with cGMP and HPRA/FDA regulations and company policies, procedures and guidelines.