Category Buyer Contract length: 2 years contract with high potential transitioning to permanent Working setting: Hybrid - 3 days/week on-site Working hours: Mon-Thu (full business hours), Friday (half day) Location: Peterlee (25% UK/EU travel) Role Responsibility: Sourcing strategy, cost management, contract negotiation, supplier relationships, assurance of supply, supplier risk sensing, audits processes, etc. Job Role Expectations | Functional/Technical Skills | Soft Skills: Sourcing - Responsible and accountable for directing the development, and/or communication and implementation of a site, regional, or worldwide sourcing strategy. Responsible for managing policies, agreements, source catalogs, and special purchasing programs, and supporting specific Product line(s) NPI programs. Accountable for the liaison with the corresponding Category/Platform based Buyers. Leadership - Provides leadership for sourcing, logistics and resource management decisions. Lead continuous improvement initiatives and purchasing new product introduction activities within Purchasing. Demonstrates leadership in recognizing the potential for cost and inventory reductions, and quality improvement; as well as responsibility for soundness of business proposals and risk assessment. Mentors and develops other Buyers, SQEs, and Purchasing Analysts (where assigned). Promotes the highest level of professionalism and business ethics. Strategy - Tools and Techniques of 6 Sigma will be required and may be attained by Black Belt, Green Belt, Project Sponsor, or other 6 Sigma related training programs. Develops and leads 6 Sigma Strategic Sourcing teams to fully understand the current performance of the supply base, evaluate strategic options, decide a course of action, and begin implementation. Must also have strong knowledge of the product, NPI, Manufacturing, Supply Chain and Category Strategies. Customers - Manages suppliers delivering into many company facilities. Typical internal customers include contacts at all organization levels, worldwide. Solves problems by determining the best course of action, within departmental guidelines, from many existing solutions. The role identifies and satisfies Critical Customer Requirements (CCR), managing Product expectations for Global Purchasing to deliver benefits required to sustain a competitive advantage. Supplier Development - Collaborates with Supplier Development Engineers to ensure continuous improvement in QCLDM with key suppliers. Builds and fosters mutually beneficial supplier relationships at all organizational levels. Analytical (descriptive), problem solving, and project leadership expertise. Effective communicator/ability to build effective relationships. Understanding of Lean Manufacturing principles as applied by the company and our suppliers. Negotiation skills, able to interpret, analyze and negotiate contractual cost elements. Business Acumen - P&L understanding/micro & macro economics. Growth/entrepreneur mindset Key Experiences : Purchasing, logistics, manufacturing, and/or engineering Category team or product team experience Project leadership experience Understanding of Lean Manufacturing principles and Continuous Process Improvement (CPI) Understanding of QCLDM Knowledge of purchasing strategy and supplier sourcing strategies Software experience using MS Office, SAP (nice to have),etc. Minimum 3 years of Procurement experience Future Experiences : Develop, communicate and implement worldwide sourcing strategy Deliver a lean, responsive and resilient material and services flow Meet defined response time, cost, quality and lean targets enabling optimal and efficient facility operations Set the vision for global supply network solutions to meet enterprise or business unit needs Collaborate with senior stakeholders Candidate must be based in UK, there is no relocation package or visa sponsorship offered. Job Title: Category Buyer Location: Peterlee, UK Job Type: Contract Trading as Aston Carter. Allegis Group Limited, Bracknell, RG12 1RT, United Kingdom. No Allegis Group Limited operates as an Employment Business and Employment Agency as set out in the Conduct of Employment Agencies and Employment Businesses Regulations 2003. Aston Carter is a company within the Allegis Group network of companies (collectively referred to as "Allegis Group"). Aerotek, Aston Carter, EASi, Talentis Solutions, TEKsystems, Stamford Consultants and The Stamford Group are Allegis Group brands. If you apply, your personal data will be processed as described in the Allegis Group Online Privacy Notice available on the website. To access our Online Privacy Notice, which explains what information we may collect, use, share, and store about you, and describes your rights and choices about this, please go to the website. We are part of a global network of companies and as a result, the personal data you provide will be shared within Allegis Group and transferred and processed outside the UK, Switzerland and European Economic Area subject to the protections described in the Allegis Group Online Privacy Notice. We store personal data in the UK, EEA, Switzerland and the USA. If you would like to exercise your privacy rights, please visit the "Contacting Us" section of our Online Privacy Notice for details on how to contact us. To protect your privacy and security, we may take steps to verify your identity, such as a password and user ID if there is an account associated with your request, or identifying information such as your address or date of birth, before proceeding with your request. If you are resident in the UK, EEA or Switzerland, we will process any access request you make in accordance with our commitments under the UK Data Protection Act, EU-U.S. Privacy Shield or the Swiss-U.S. Privacy Shield.
02/05/2024
Project-based
Category Buyer Contract length: 2 years contract with high potential transitioning to permanent Working setting: Hybrid - 3 days/week on-site Working hours: Mon-Thu (full business hours), Friday (half day) Location: Peterlee (25% UK/EU travel) Role Responsibility: Sourcing strategy, cost management, contract negotiation, supplier relationships, assurance of supply, supplier risk sensing, audits processes, etc. Job Role Expectations | Functional/Technical Skills | Soft Skills: Sourcing - Responsible and accountable for directing the development, and/or communication and implementation of a site, regional, or worldwide sourcing strategy. Responsible for managing policies, agreements, source catalogs, and special purchasing programs, and supporting specific Product line(s) NPI programs. Accountable for the liaison with the corresponding Category/Platform based Buyers. Leadership - Provides leadership for sourcing, logistics and resource management decisions. Lead continuous improvement initiatives and purchasing new product introduction activities within Purchasing. Demonstrates leadership in recognizing the potential for cost and inventory reductions, and quality improvement; as well as responsibility for soundness of business proposals and risk assessment. Mentors and develops other Buyers, SQEs, and Purchasing Analysts (where assigned). Promotes the highest level of professionalism and business ethics. Strategy - Tools and Techniques of 6 Sigma will be required and may be attained by Black Belt, Green Belt, Project Sponsor, or other 6 Sigma related training programs. Develops and leads 6 Sigma Strategic Sourcing teams to fully understand the current performance of the supply base, evaluate strategic options, decide a course of action, and begin implementation. Must also have strong knowledge of the product, NPI, Manufacturing, Supply Chain and Category Strategies. Customers - Manages suppliers delivering into many company facilities. Typical internal customers include contacts at all organization levels, worldwide. Solves problems by determining the best course of action, within departmental guidelines, from many existing solutions. The role identifies and satisfies Critical Customer Requirements (CCR), managing Product expectations for Global Purchasing to deliver benefits required to sustain a competitive advantage. Supplier Development - Collaborates with Supplier Development Engineers to ensure continuous improvement in QCLDM with key suppliers. Builds and fosters mutually beneficial supplier relationships at all organizational levels. Analytical (descriptive), problem solving, and project leadership expertise. Effective communicator/ability to build effective relationships. Understanding of Lean Manufacturing principles as applied by the company and our suppliers. Negotiation skills, able to interpret, analyze and negotiate contractual cost elements. Business Acumen - P&L understanding/micro & macro economics. Growth/entrepreneur mindset Key Experiences : Purchasing, logistics, manufacturing, and/or engineering Category team or product team experience Project leadership experience Understanding of Lean Manufacturing principles and Continuous Process Improvement (CPI) Understanding of QCLDM Knowledge of purchasing strategy and supplier sourcing strategies Software experience using MS Office, SAP (nice to have),etc. Minimum 3 years of Procurement experience Future Experiences : Develop, communicate and implement worldwide sourcing strategy Deliver a lean, responsive and resilient material and services flow Meet defined response time, cost, quality and lean targets enabling optimal and efficient facility operations Set the vision for global supply network solutions to meet enterprise or business unit needs Collaborate with senior stakeholders Candidate must be based in UK, there is no relocation package or visa sponsorship offered. Job Title: Category Buyer Location: Peterlee, UK Job Type: Contract Trading as Aston Carter. Allegis Group Limited, Bracknell, RG12 1RT, United Kingdom. No Allegis Group Limited operates as an Employment Business and Employment Agency as set out in the Conduct of Employment Agencies and Employment Businesses Regulations 2003. Aston Carter is a company within the Allegis Group network of companies (collectively referred to as "Allegis Group"). Aerotek, Aston Carter, EASi, Talentis Solutions, TEKsystems, Stamford Consultants and The Stamford Group are Allegis Group brands. If you apply, your personal data will be processed as described in the Allegis Group Online Privacy Notice available on the website. To access our Online Privacy Notice, which explains what information we may collect, use, share, and store about you, and describes your rights and choices about this, please go to the website. We are part of a global network of companies and as a result, the personal data you provide will be shared within Allegis Group and transferred and processed outside the UK, Switzerland and European Economic Area subject to the protections described in the Allegis Group Online Privacy Notice. We store personal data in the UK, EEA, Switzerland and the USA. If you would like to exercise your privacy rights, please visit the "Contacting Us" section of our Online Privacy Notice for details on how to contact us. To protect your privacy and security, we may take steps to verify your identity, such as a password and user ID if there is an account associated with your request, or identifying information such as your address or date of birth, before proceeding with your request. If you are resident in the UK, EEA or Switzerland, we will process any access request you make in accordance with our commitments under the UK Data Protection Act, EU-U.S. Privacy Shield or the Swiss-U.S. Privacy Shield.
Job Title : Configuration Project Leader Location : Broughton, UK Type of role : 12 months Contract (possible extension) Pay Rate: £35.00 umbrella per hour. iO Associates is seeking a skilled Configuration Project Leader to oversee satellite supply projects. You will be in charge of implementing adjustments to the product by use of the Aircraft Change Process (ACP). Working with a broad network of cross-functional and international stakeholders, such as Chief Engineering, Program Management, Engineering, ME, Procurement, Supply Chain, Operations, and so on, will provide you the chance to be responsible for the delivery of work on schedule, within budget, and with high quality. Company based out in Broughton , UK. They are the industry leader in the design, production, and delivery of aeronautical goods and services. Required: Understanding of configuration management combined with an understanding of the aircraft change process. Technical degree holders (BEng/BSc) and/or prior experience in Manufacturing Engineering, Design Engineering, or Quality Management are preferred. Required an existing ACC2 and/or ICC_ACP user. Preferable past delegations inside the "CAIR," "RFF," and/or "CA reallocation" processes. Technical understanding of the Wing's design and production procedures. If you are looking to work for a company that gives you a career framework with a clear development path, please reply with your CV and references.
01/05/2024
Project-based
Job Title : Configuration Project Leader Location : Broughton, UK Type of role : 12 months Contract (possible extension) Pay Rate: £35.00 umbrella per hour. iO Associates is seeking a skilled Configuration Project Leader to oversee satellite supply projects. You will be in charge of implementing adjustments to the product by use of the Aircraft Change Process (ACP). Working with a broad network of cross-functional and international stakeholders, such as Chief Engineering, Program Management, Engineering, ME, Procurement, Supply Chain, Operations, and so on, will provide you the chance to be responsible for the delivery of work on schedule, within budget, and with high quality. Company based out in Broughton , UK. They are the industry leader in the design, production, and delivery of aeronautical goods and services. Required: Understanding of configuration management combined with an understanding of the aircraft change process. Technical degree holders (BEng/BSc) and/or prior experience in Manufacturing Engineering, Design Engineering, or Quality Management are preferred. Required an existing ACC2 and/or ICC_ACP user. Preferable past delegations inside the "CAIR," "RFF," and/or "CA reallocation" processes. Technical understanding of the Wing's design and production procedures. If you are looking to work for a company that gives you a career framework with a clear development path, please reply with your CV and references.
Configuration & Product Development Project Leader months + +Hybrid working on site in Broughton +Inside IR35 +up to £30 ph Skills: +Aircraft change process +Configuration Management +Project Management As the successful candidate, the core of your role will be to drive product changes (modifications/mods) through the Aircraft Change Process (ACP). You will directly represent the SA Wing VSM mods management team (OSWX1 siglum) and more broadly the SA Wing VSM (OSW siglum). You will have the opportunity to work with a wide network of cross-functional and transnational stakeholders, including; Configuration management, Chief Engineering, Programme Management, Engineering, ME, Procurement, Supply chain, Operations, etc. As CPD Project Leader - also referred to as Product Change Leader (PCL) - you will be responsible for the end to end management of the mods you're allocated (ie from idea generation to the point of embodiment on the aircraft). You will be accountable for their on Time, Cost and Quality delivery. This role focuses mostly on "Flow" mods (ie mods of <300k€) that impact Wing production, including our major assembly suppliers, Broughton Plant and China Wing. You will also have opportunities to work on; Major Modifications (MaMos; mods of >300k€), Major Industrial Problems (MIPs), Major In-Service Problems (MISPs), mods that impact Final Assembly Line (FAL), as well as mods driven by safety, regulatory compliance and ramp up projects; such as Rate , A321 Wing transfer to China, etc. Given the varied and far reaching nature of the role, this is a fantastic opportunity for personal and career development. Skills/experience: Strong project management skills/experience; PMP certification would be highly desirable. Understanding of the aircraft change process with a general appreciation for configuration management. Thus, an existing ACC2 and/or ICC_ACP user would be highly desirable. And/or existing or previous delegations within 'CAIR', 'RFF' and/or 'CA reallocation' process(es) would be desirable. A technical understanding of the Wing design and manufacturing processes would be desirable. Thus, candidates with a technical degree (BEng/BSc) and or past experience in Manufacturing Engineering, Design Engineering, Quality are desirable. An appreciation for material requirements planning (creation and cascade of demand) and/or master production scheduling would be beneficial, but not mandatory. Thus, an existing SAP-APD user would be beneficial. If you'd like to discuss this role in more detail, please send your updated CV to (see below) and I'll get in touch.
01/05/2024
Project-based
Configuration & Product Development Project Leader months + +Hybrid working on site in Broughton +Inside IR35 +up to £30 ph Skills: +Aircraft change process +Configuration Management +Project Management As the successful candidate, the core of your role will be to drive product changes (modifications/mods) through the Aircraft Change Process (ACP). You will directly represent the SA Wing VSM mods management team (OSWX1 siglum) and more broadly the SA Wing VSM (OSW siglum). You will have the opportunity to work with a wide network of cross-functional and transnational stakeholders, including; Configuration management, Chief Engineering, Programme Management, Engineering, ME, Procurement, Supply chain, Operations, etc. As CPD Project Leader - also referred to as Product Change Leader (PCL) - you will be responsible for the end to end management of the mods you're allocated (ie from idea generation to the point of embodiment on the aircraft). You will be accountable for their on Time, Cost and Quality delivery. This role focuses mostly on "Flow" mods (ie mods of <300k€) that impact Wing production, including our major assembly suppliers, Broughton Plant and China Wing. You will also have opportunities to work on; Major Modifications (MaMos; mods of >300k€), Major Industrial Problems (MIPs), Major In-Service Problems (MISPs), mods that impact Final Assembly Line (FAL), as well as mods driven by safety, regulatory compliance and ramp up projects; such as Rate , A321 Wing transfer to China, etc. Given the varied and far reaching nature of the role, this is a fantastic opportunity for personal and career development. Skills/experience: Strong project management skills/experience; PMP certification would be highly desirable. Understanding of the aircraft change process with a general appreciation for configuration management. Thus, an existing ACC2 and/or ICC_ACP user would be highly desirable. And/or existing or previous delegations within 'CAIR', 'RFF' and/or 'CA reallocation' process(es) would be desirable. A technical understanding of the Wing design and manufacturing processes would be desirable. Thus, candidates with a technical degree (BEng/BSc) and or past experience in Manufacturing Engineering, Design Engineering, Quality are desirable. An appreciation for material requirements planning (creation and cascade of demand) and/or master production scheduling would be beneficial, but not mandatory. Thus, an existing SAP-APD user would be beneficial. If you'd like to discuss this role in more detail, please send your updated CV to (see below) and I'll get in touch.
CNC MILLER SETTER OPERATOR REPORTING TO: PRODUCTION MANAGER Due to my client's continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Miller Setter Operator to support Production. My client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, my client can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. At my client, we believe that good customer service is every bit as important as a strong product. DUTIES AND RESPONSIBILITIES INCLUDE: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Setting and operating milling machines to required tolerance Use of manual measuring equipment Tool setting on CNC Machines Programme proving of new products as and when required. Actively provide details of changes to correct/improve programs that go towards improving machining performance Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Use of Fanuc controls Tapping and Deburring where required Help and assist other members of the milling cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the [COMPANY] Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required THE IDEAL CANDIDATE MUST HAVE/SKILLS REQUIRED: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player EXPERIENCE IN THE FOLLOWING AREAS WILL BE REQUIRED: 3-5 Years relevant production experience Experience of Milling Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs DESIRABLE: Experience of a high-quality Manufacturing environment Have previously run Matsuura 3-4-5 axis milling machines or similar Minor Fanuc programme editing Excellent communication skills Good time management
29/04/2024
Full time
CNC MILLER SETTER OPERATOR REPORTING TO: PRODUCTION MANAGER Due to my client's continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Miller Setter Operator to support Production. My client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, my client can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. At my client, we believe that good customer service is every bit as important as a strong product. DUTIES AND RESPONSIBILITIES INCLUDE: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Setting and operating milling machines to required tolerance Use of manual measuring equipment Tool setting on CNC Machines Programme proving of new products as and when required. Actively provide details of changes to correct/improve programs that go towards improving machining performance Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Use of Fanuc controls Tapping and Deburring where required Help and assist other members of the milling cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the [COMPANY] Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required THE IDEAL CANDIDATE MUST HAVE/SKILLS REQUIRED: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player EXPERIENCE IN THE FOLLOWING AREAS WILL BE REQUIRED: 3-5 Years relevant production experience Experience of Milling Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs DESIRABLE: Experience of a high-quality Manufacturing environment Have previously run Matsuura 3-4-5 axis milling machines or similar Minor Fanuc programme editing Excellent communication skills Good time management
Job Title: CNC Grinder Setter Operator Department: Production Reporting to: Production Supervisor Due to their continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Grinder Setter Operator to support Production. Our client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, they can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. We believe that good customer service is every bit as important as a strong product. Duties and responsibilities include: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Use of manual measuring equipment Produce programmes on the machine as and when new products arrive Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Machines include: Jones & Shipman 1300X, Studer S40, Studer S145, Jones & Shipman Techmaster 634 surface grinder Actively provide details of changes to correct/improve production of parts towards improving machining performance Help and assist other members of the grinding cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required The ideal candidate must have/skills required: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player Experience in the following areas will be required: 3-5 Years relevant production experience Experience of Grinding Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs Desirable: Experience of a high-quality Manufacturing environment Writing & editing CNC Grinding programs. Excellent communication skills Good time management
29/04/2024
Full time
Job Title: CNC Grinder Setter Operator Department: Production Reporting to: Production Supervisor Due to their continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Grinder Setter Operator to support Production. Our client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, they can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. We believe that good customer service is every bit as important as a strong product. Duties and responsibilities include: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Use of manual measuring equipment Produce programmes on the machine as and when new products arrive Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Machines include: Jones & Shipman 1300X, Studer S40, Studer S145, Jones & Shipman Techmaster 634 surface grinder Actively provide details of changes to correct/improve production of parts towards improving machining performance Help and assist other members of the grinding cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required The ideal candidate must have/skills required: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player Experience in the following areas will be required: 3-5 Years relevant production experience Experience of Grinding Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs Desirable: Experience of a high-quality Manufacturing environment Writing & editing CNC Grinding programs. Excellent communication skills Good time management
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
29/04/2024
Full time
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
Job Title: Continuous Improvement Lead Industry: Medical Device Manufacturing Location: Plymouth Position Type: Permanent About The Company Join a pioneering team at a UK-based company specializing in advanced wound care and wound closure products. An organisation dedicated to developing and manufacturing world-leading solutions that enhance patient care. With a wealth of resources and specialized expertise, they offer a unique opportunity to be part of a team involved in every aspect of product design, development, and manufacture. Job Description Overview Responsible for all manufacturing processes, lean improvements, cost reduction, technical capability enhancement, process development, new production introduction delivering outputs in line with the business objectives on safety, quality, delivery, and cost. To execute site support activities and provide maintenance of all relevant operational equipment to ensure longevity and availability. Key Responsibilities Working closely alongside production operations to ensure the startup/shut down and continual running of all manufacturing processes. Establish & maintain standard processes within the validated process window plus optimisation of the technical performance for all manufacturing elements. Investigate and resolve issues related to the technical performance Optimize and deliver continuous improvement on existing manufacturing processes. Assist R&D with the introduction of new products and processes into manufacturing. Development of new standard processes and ensure optimal implementation into manufacturing supported with initial procedures, training and coaching of manufacturing. Collaborate with Group Engineering to execute or support assigned capital expenditure projects. Maintain all production equipment to the defined schedule and provide maintenance of the whole site requirements including, fire system testing/training, legionella checks, calibration, and contractor control. Qualifications Current experience in production environment support role (or 5 years min). Experience of developing and/or testing a process within a clean room manufacturing environment. Good understanding of Lean Principles (5S/VSM/Kaizen). Minimum of HNC level qualification in mechanical, electronic, industrial, or manufacturing engineering, or similar. Experience in process and product validation (sterile packaging according to ISO 11607 would be advantageous). Understanding of a quality management system (ISO13485/FDA) and medical device manufacturing advantageous. Very good MS Office skills, especially Excel. Strong organizational skills with the ability to communicate at all levels of the organization. Effective time management with the ability to set priorities. Good written and spoken English. Salary & Benefits Up to £45,000 per annum (Depending on Experience) Annual incentive bonus Life Cover Penson contribution up to 6% Dental Insurance Employee share scheme Other Information Exciting opportunity to lead a transformative project with significant organizational impact. Competitive salary package commensurate with experience. Opportunity to work with a dynamic and collaborative team focused on driving continuous improvement and excellence. How to Apply Apply now by submitting your CV below, alternatively you can send your CV. Please include "Continuous Improvement Lead" in the subject line
25/04/2024
Full time
Job Title: Continuous Improvement Lead Industry: Medical Device Manufacturing Location: Plymouth Position Type: Permanent About The Company Join a pioneering team at a UK-based company specializing in advanced wound care and wound closure products. An organisation dedicated to developing and manufacturing world-leading solutions that enhance patient care. With a wealth of resources and specialized expertise, they offer a unique opportunity to be part of a team involved in every aspect of product design, development, and manufacture. Job Description Overview Responsible for all manufacturing processes, lean improvements, cost reduction, technical capability enhancement, process development, new production introduction delivering outputs in line with the business objectives on safety, quality, delivery, and cost. To execute site support activities and provide maintenance of all relevant operational equipment to ensure longevity and availability. Key Responsibilities Working closely alongside production operations to ensure the startup/shut down and continual running of all manufacturing processes. Establish & maintain standard processes within the validated process window plus optimisation of the technical performance for all manufacturing elements. Investigate and resolve issues related to the technical performance Optimize and deliver continuous improvement on existing manufacturing processes. Assist R&D with the introduction of new products and processes into manufacturing. Development of new standard processes and ensure optimal implementation into manufacturing supported with initial procedures, training and coaching of manufacturing. Collaborate with Group Engineering to execute or support assigned capital expenditure projects. Maintain all production equipment to the defined schedule and provide maintenance of the whole site requirements including, fire system testing/training, legionella checks, calibration, and contractor control. Qualifications Current experience in production environment support role (or 5 years min). Experience of developing and/or testing a process within a clean room manufacturing environment. Good understanding of Lean Principles (5S/VSM/Kaizen). Minimum of HNC level qualification in mechanical, electronic, industrial, or manufacturing engineering, or similar. Experience in process and product validation (sterile packaging according to ISO 11607 would be advantageous). Understanding of a quality management system (ISO13485/FDA) and medical device manufacturing advantageous. Very good MS Office skills, especially Excel. Strong organizational skills with the ability to communicate at all levels of the organization. Effective time management with the ability to set priorities. Good written and spoken English. Salary & Benefits Up to £45,000 per annum (Depending on Experience) Annual incentive bonus Life Cover Penson contribution up to 6% Dental Insurance Employee share scheme Other Information Exciting opportunity to lead a transformative project with significant organizational impact. Competitive salary package commensurate with experience. Opportunity to work with a dynamic and collaborative team focused on driving continuous improvement and excellence. How to Apply Apply now by submitting your CV below, alternatively you can send your CV. Please include "Continuous Improvement Lead" in the subject line
Production Engineering defines how the product will be manufactured by the production teams including the design packaging enabling the right quantity of components/product are delivered to support the speed of the production process. The department also reviews efficiencies and eliminates waste within the manufacturing process ensuring delivery of high quality products to clearly defined standards. Key areas of responsibility for the role includes: Responsible for increasing manufacturing productivity by an agreed % per annum in line with Site targets Responsible for supporting operations on daily issues Responsible for leading Capex projects from justification through specification, procurement and validation Lead/attend engineering/technical review meetings and present work status and provide feedback where required To work closely with the Quality Engineers to improve equipment capability in line with site specific targets Assess the manufacturing requirements associated with a product, compare to existing capabilities and make recommendations for development The successful candidate will be able to demonstrate the following: A HNC or HND qualification or higher in a relevant Engineering discipline or equivalent Previous proven experience in a production manufacturing environment Previous experience within a production environment in a Manufacturing Engineering role Previous experience in lean manufacturing tools and techniques, including, but not limited to; value stream mapping, 6S, KanBan, Kaizen, MRL, PFMEA and SPC Experience in Manufacturing Engineering in an ISO 9001 environment Experience in project delivery and problem solving Experience of operating within a strong H&S Culture
25/04/2024
Full time
Production Engineering defines how the product will be manufactured by the production teams including the design packaging enabling the right quantity of components/product are delivered to support the speed of the production process. The department also reviews efficiencies and eliminates waste within the manufacturing process ensuring delivery of high quality products to clearly defined standards. Key areas of responsibility for the role includes: Responsible for increasing manufacturing productivity by an agreed % per annum in line with Site targets Responsible for supporting operations on daily issues Responsible for leading Capex projects from justification through specification, procurement and validation Lead/attend engineering/technical review meetings and present work status and provide feedback where required To work closely with the Quality Engineers to improve equipment capability in line with site specific targets Assess the manufacturing requirements associated with a product, compare to existing capabilities and make recommendations for development The successful candidate will be able to demonstrate the following: A HNC or HND qualification or higher in a relevant Engineering discipline or equivalent Previous proven experience in a production manufacturing environment Previous experience within a production environment in a Manufacturing Engineering role Previous experience in lean manufacturing tools and techniques, including, but not limited to; value stream mapping, 6S, KanBan, Kaizen, MRL, PFMEA and SPC Experience in Manufacturing Engineering in an ISO 9001 environment Experience in project delivery and problem solving Experience of operating within a strong H&S Culture
Infoplus Technologies UK Ltd
Durham, County Durham
Responsibilities: Developing, analysing and managing Manufacturing/Fabrication/Paint/Assembly Projects. Assisting in developing department capital and expense budgets as well as maintaining the department capital forecast. - Administering the New Product Introduction (NPI) process to ensure that Engineering drawings are released and processed on time for NPI build. Leading, developing and supporting timely Design for Manufacture Best Practices, Operation Excellence Process Validation Best Practices and Lean Operation Excellence and Manufacturing Best Practices. Engaging in creative problem solving to address operational issues including: ergonomic/safety, efficiency improvements, process bottlenecks, quality concerns. Working with internal and external suppliers to develop and manage projects to ensure efficient and cost- effective systems and processes to produce quality products. Providing the application, procurement, processing, installation and capability of new fabrication, material handling, test, heat treat, welding, painting and/or chemical processes and equipment. Designing, developing and implementing the integration of manufacturing systems including factory control software, scheduling techniques, simulation and systems application. Coordinating, planning, monitoring and reporting the activities associated with the flow analysis, design, financial modelling and implementation of complex manufacturing group technology cells in an assigned area. Coordinating the purchase and application of machine tools, controls and related equipment corporate wide to ensure the latest technology is being used to increase efficiency and economy of operations. Supporting designing complex or intricate jigs and fixtures. Desirable: University technical master's degree in a manufacturing engineering-related discipline Familiar with company policies and procedures with a strong department background. Able to build strong relationships and collaborate with various stakeholders. Lean manufacturing training and qualifications CE/PUWER Qualifications Safety/Ergonomic Qualifications Safety NEBOSH/IOSH Qualification and/or be able to demonstrate through previous experience, a positive attitude and commitment towards Safety Leadership Experience and Qualifications APQP/PPAP Experience and Qualifications
25/04/2024
Full time
Responsibilities: Developing, analysing and managing Manufacturing/Fabrication/Paint/Assembly Projects. Assisting in developing department capital and expense budgets as well as maintaining the department capital forecast. - Administering the New Product Introduction (NPI) process to ensure that Engineering drawings are released and processed on time for NPI build. Leading, developing and supporting timely Design for Manufacture Best Practices, Operation Excellence Process Validation Best Practices and Lean Operation Excellence and Manufacturing Best Practices. Engaging in creative problem solving to address operational issues including: ergonomic/safety, efficiency improvements, process bottlenecks, quality concerns. Working with internal and external suppliers to develop and manage projects to ensure efficient and cost- effective systems and processes to produce quality products. Providing the application, procurement, processing, installation and capability of new fabrication, material handling, test, heat treat, welding, painting and/or chemical processes and equipment. Designing, developing and implementing the integration of manufacturing systems including factory control software, scheduling techniques, simulation and systems application. Coordinating, planning, monitoring and reporting the activities associated with the flow analysis, design, financial modelling and implementation of complex manufacturing group technology cells in an assigned area. Coordinating the purchase and application of machine tools, controls and related equipment corporate wide to ensure the latest technology is being used to increase efficiency and economy of operations. Supporting designing complex or intricate jigs and fixtures. Desirable: University technical master's degree in a manufacturing engineering-related discipline Familiar with company policies and procedures with a strong department background. Able to build strong relationships and collaborate with various stakeholders. Lean manufacturing training and qualifications CE/PUWER Qualifications Safety/Ergonomic Qualifications Safety NEBOSH/IOSH Qualification and/or be able to demonstrate through previous experience, a positive attitude and commitment towards Safety Leadership Experience and Qualifications APQP/PPAP Experience and Qualifications