Job Title: Environmental Health & Safety (EHS) Manager Industry: Medical Device Manufacturing Location: Winsford Position Type: Permanent About The Company Join a pioneering team at a UK-based company specializing in advanced wound care and wound closure products. An organisation dedicated to developing and manufacturing world-leading solutions that enhance patient care. With a wealth of resources and specialized expertise, they offer a unique opportunity to be part of a team involved in every aspect of product design, development, and manufacture. Job Description Overview To ensure the Health & Safety of all employees across the businesses in the UK, with specific focus on the role holders assigned operational division. Key Responsibilities Drive a culture of "Safety First" and "Zero Harm" To ensure that activities within the appointed operational division do not pose any danger to the environment and promote sustainable practices and process. Developing a culture of "Safety First" and "Zero Harm". Coaching and developing of employees at all levels in relation to EHSS areas, by walking the shopfloor, coaching, and developing staff to be "Safety Ambassadors". Driving expected EHSS standards to reduce and mitigate risk of accident/incident/losses to meet business objectives, moving towards a "Zero Harm" environment. Maintain and develop following continual improvement environmental, health, safety and sustainable (EHSS) working conditions for all employees. Following EHS objectives and Group development plans. Working with the r leadership teams to ensure industry leading working practices are developed and become habitual. Drive Compliance with Appropriate Management systems and local/international legislation. Supporting and championing both internal and external audits and certifications (ISO 14001 & ISO 50001). Liaise with external enforcement agencies in allocated operational areas to ensure correct working practices are employed and no adverse risks and/or prosecutions are brought. Ensure reported EHSS events at all levels are reported, investigated, analysed for route cause and where appropriate corrective actions to prevent reoccurrence are instigated. Act as a Subject Matter Expert (SME) for all areas of EHSS, where required to develop working practices. Lead and manage both Group and divisional EHSS initiatives with site and divisional leadership teams. Lead internal and external site audits and visits where these relate to EHSS activity. Ensure compliance with both Local, National, and where appropriate international EHSS legislation, sharing information, knowledge, and good practice. Conduct regular planned and unplanned audits of sites/processes and projects within area of control. Project Management and/or support for Divisional and local EHSS projects. Oversight and supporting Management of key EHSS related activities at all divisional locations, including COSHH, Risk Assessment and Environmental matters. Production of monthly and other requested EHSS management reports, project updates. Determine and drive risk reduction activity. Ensuring training needs are EHSS activity are identified, and appropriate plans put in place were required. To develop divisional EHSS forecasts and support the wider Group EHSS forecast in the planning's, processes, and cost allocation of EHSS activities. Work with Directors of divisional area providing support, challenge, coaching and direction, whilst managing their own time and resource. Support in HR activities such as investigations, disciplinary and grievance processes in relation to EHSS matters. Ensure divisional locations have in place contractor, permits to work and visitor processes. Through auditing and review processes. Where required working Occupational Health providers. Understand and deliver change management processes. Able to make effective decisions to deliver corporate Objectives. Develop and responsible for controlling Divisional EHSS forecasts and budget. Company requirements to comply with any applicable legislation. Where serious or imminent danger is found or suspected the ability to stop process/production or location undertaking such activity until safety and environmental expectations/actions have been met. In the areas of EHSS to raise immediately to the Senior Manager any areas of immediate concern which could require the implementation of the Group Crisis Management Process. Feel comfortable raising concerns to the appropriate person, in areas outside of EHSS where these may have detrimental implications. Work with Directors, Managers, Supervisors, and local teams on day-to-day basis. No direct supervisory responsibility. Liaise with external legislative and insurance bodies as well as other EHSS related agencies. Excellent communicator both up and down with the organisation. Face to face in a coaching and developmental role, leading Shopfloor walks. Communicate with a variety of methods, including face-to-face, email/phone and teams/virtual meetings. Required to play an active role within Group, divisional and project meetings as needed. Devise, develop and present date to all levels of the business. Compile and circulate a monthly update/report to a divisional and to group level. Qualifications Qualified to appropriate diploma/NVQ/Trade or Technical level. Health, Safety and Environmental Knowledge in Manufacturing - Medical Device Environment (Preferred). Member of a recognised EHSS organisation (IOSH/IEMA) Pro-active in keeping up to date with both local and international EHSS developments, potential process changes and upcoming changes in applicable legislation. Good working knowledge of Microsoft and EHS software packages. Ability to communicate clearly and persuasively orally and in writing to a wide and varied audience. Ability to work autonomously and collaboratively relying on developed skills and knowledge to achieve EHSS objectives. Ability to analyse business needs and make recommendations based on sound business knowledge and commercial acumen. Ability to respond flexibly to change, sometime at short notice. Understanding of and ability to maintain confidentiality and proprietary data and systems. Salary & Benefits Up to £58,000 per annum Annual incentive bonus Life Cover Penson contribution up to 6% Dental Insurance Employee share scheme Other Information Exciting opportunity to lead a transformative project with significant organizational impact. Competitive salary package commensurate with experience. Opportunity to work with a dynamic and collaborative team focused on driving continuous improvement and excellence. How to Apply Apply now by submitting your CV below, alternatively you can send your CV to (see below) Please include "EHS Manager" in the subject line
01/05/2024
Full time
Job Title: Environmental Health & Safety (EHS) Manager Industry: Medical Device Manufacturing Location: Winsford Position Type: Permanent About The Company Join a pioneering team at a UK-based company specializing in advanced wound care and wound closure products. An organisation dedicated to developing and manufacturing world-leading solutions that enhance patient care. With a wealth of resources and specialized expertise, they offer a unique opportunity to be part of a team involved in every aspect of product design, development, and manufacture. Job Description Overview To ensure the Health & Safety of all employees across the businesses in the UK, with specific focus on the role holders assigned operational division. Key Responsibilities Drive a culture of "Safety First" and "Zero Harm" To ensure that activities within the appointed operational division do not pose any danger to the environment and promote sustainable practices and process. Developing a culture of "Safety First" and "Zero Harm". Coaching and developing of employees at all levels in relation to EHSS areas, by walking the shopfloor, coaching, and developing staff to be "Safety Ambassadors". Driving expected EHSS standards to reduce and mitigate risk of accident/incident/losses to meet business objectives, moving towards a "Zero Harm" environment. Maintain and develop following continual improvement environmental, health, safety and sustainable (EHSS) working conditions for all employees. Following EHS objectives and Group development plans. Working with the r leadership teams to ensure industry leading working practices are developed and become habitual. Drive Compliance with Appropriate Management systems and local/international legislation. Supporting and championing both internal and external audits and certifications (ISO 14001 & ISO 50001). Liaise with external enforcement agencies in allocated operational areas to ensure correct working practices are employed and no adverse risks and/or prosecutions are brought. Ensure reported EHSS events at all levels are reported, investigated, analysed for route cause and where appropriate corrective actions to prevent reoccurrence are instigated. Act as a Subject Matter Expert (SME) for all areas of EHSS, where required to develop working practices. Lead and manage both Group and divisional EHSS initiatives with site and divisional leadership teams. Lead internal and external site audits and visits where these relate to EHSS activity. Ensure compliance with both Local, National, and where appropriate international EHSS legislation, sharing information, knowledge, and good practice. Conduct regular planned and unplanned audits of sites/processes and projects within area of control. Project Management and/or support for Divisional and local EHSS projects. Oversight and supporting Management of key EHSS related activities at all divisional locations, including COSHH, Risk Assessment and Environmental matters. Production of monthly and other requested EHSS management reports, project updates. Determine and drive risk reduction activity. Ensuring training needs are EHSS activity are identified, and appropriate plans put in place were required. To develop divisional EHSS forecasts and support the wider Group EHSS forecast in the planning's, processes, and cost allocation of EHSS activities. Work with Directors of divisional area providing support, challenge, coaching and direction, whilst managing their own time and resource. Support in HR activities such as investigations, disciplinary and grievance processes in relation to EHSS matters. Ensure divisional locations have in place contractor, permits to work and visitor processes. Through auditing and review processes. Where required working Occupational Health providers. Understand and deliver change management processes. Able to make effective decisions to deliver corporate Objectives. Develop and responsible for controlling Divisional EHSS forecasts and budget. Company requirements to comply with any applicable legislation. Where serious or imminent danger is found or suspected the ability to stop process/production or location undertaking such activity until safety and environmental expectations/actions have been met. In the areas of EHSS to raise immediately to the Senior Manager any areas of immediate concern which could require the implementation of the Group Crisis Management Process. Feel comfortable raising concerns to the appropriate person, in areas outside of EHSS where these may have detrimental implications. Work with Directors, Managers, Supervisors, and local teams on day-to-day basis. No direct supervisory responsibility. Liaise with external legislative and insurance bodies as well as other EHSS related agencies. Excellent communicator both up and down with the organisation. Face to face in a coaching and developmental role, leading Shopfloor walks. Communicate with a variety of methods, including face-to-face, email/phone and teams/virtual meetings. Required to play an active role within Group, divisional and project meetings as needed. Devise, develop and present date to all levels of the business. Compile and circulate a monthly update/report to a divisional and to group level. Qualifications Qualified to appropriate diploma/NVQ/Trade or Technical level. Health, Safety and Environmental Knowledge in Manufacturing - Medical Device Environment (Preferred). Member of a recognised EHSS organisation (IOSH/IEMA) Pro-active in keeping up to date with both local and international EHSS developments, potential process changes and upcoming changes in applicable legislation. Good working knowledge of Microsoft and EHS software packages. Ability to communicate clearly and persuasively orally and in writing to a wide and varied audience. Ability to work autonomously and collaboratively relying on developed skills and knowledge to achieve EHSS objectives. Ability to analyse business needs and make recommendations based on sound business knowledge and commercial acumen. Ability to respond flexibly to change, sometime at short notice. Understanding of and ability to maintain confidentiality and proprietary data and systems. Salary & Benefits Up to £58,000 per annum Annual incentive bonus Life Cover Penson contribution up to 6% Dental Insurance Employee share scheme Other Information Exciting opportunity to lead a transformative project with significant organizational impact. Competitive salary package commensurate with experience. Opportunity to work with a dynamic and collaborative team focused on driving continuous improvement and excellence. How to Apply Apply now by submitting your CV below, alternatively you can send your CV to (see below) Please include "EHS Manager" in the subject line
Adecco are working with a Medical Device company focused on rapid growth over the next two years. Our client, a supplier of Class I Medical Devices, is looking for a permanent QARA Specialist to join the team. With a heavier focus on RA, this is a role that will allow you to work on a variety of tasks throughout your career. Based in Northampton, the client is happy to allow hybrid working with 2 days from home and 3 days in the office. There are two main projects to focus on initially: Creating technical files for the company's products, collaborating with external regulatory consultants for gap analysis and review. Managing and reporting on complaints, conducting thorough investigations, and ensuring timely resolution. Working for a smaller organisation like this, it's important you are used to a busy manufacturing environment, with the ability to explain complicated QARA processes in simple terms to the wider business. You will work closely with the QARA Manager, and your role will grow as the company continue to expand their product portfolio. Interested? Apply now with an up to date CV and I will be in touch.
30/04/2024
Full time
Adecco are working with a Medical Device company focused on rapid growth over the next two years. Our client, a supplier of Class I Medical Devices, is looking for a permanent QARA Specialist to join the team. With a heavier focus on RA, this is a role that will allow you to work on a variety of tasks throughout your career. Based in Northampton, the client is happy to allow hybrid working with 2 days from home and 3 days in the office. There are two main projects to focus on initially: Creating technical files for the company's products, collaborating with external regulatory consultants for gap analysis and review. Managing and reporting on complaints, conducting thorough investigations, and ensuring timely resolution. Working for a smaller organisation like this, it's important you are used to a busy manufacturing environment, with the ability to explain complicated QARA processes in simple terms to the wider business. You will work closely with the QARA Manager, and your role will grow as the company continue to expand their product portfolio. Interested? Apply now with an up to date CV and I will be in touch.
Data Science - Business Manager/Data Science/Machine Learning Engineer/CRM/Data Science/Stafford/Stone/Stoke-on-Trent/Burton-on-Trent/Cannock - £45,000 - £55,000 My client is hiring for a new Data Science and Business Manager. Your role will be to lead profitable growth in the business of Materials Science. If you have experience working as a Business/Commercial Manager in a Materials Science position, then this role could be for you. Requirements: Ph.D. or Master's degree in Data Science, Materials Science, or a related field. Must have experience in Materials Science Proven track record in computational modelling & or statistical analysis, and Machine Learning Having a working knowledge of using Python or R would be Responsibilities: Lead on projects that involve computational modelling and data analytics with a focus on Materials Science Design and execute commercial vision driven by data for our Computational Modelling and Data Science Team. Build and maintain strong relationships with customers and collaborators Familiarity with materials manufacturing processes and characterisation techniques Collaborate with team members along with communicating to the relevant stakeholders on technical matters Data Scientist- Business Manager/Machine Learning Engineer/CRM/Data Science/Stafford/Stone/Stoke-on-Trent/Burton-on-Trent/Cannock - £45,000 - £55,000 Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
30/04/2024
Full time
Data Science - Business Manager/Data Science/Machine Learning Engineer/CRM/Data Science/Stafford/Stone/Stoke-on-Trent/Burton-on-Trent/Cannock - £45,000 - £55,000 My client is hiring for a new Data Science and Business Manager. Your role will be to lead profitable growth in the business of Materials Science. If you have experience working as a Business/Commercial Manager in a Materials Science position, then this role could be for you. Requirements: Ph.D. or Master's degree in Data Science, Materials Science, or a related field. Must have experience in Materials Science Proven track record in computational modelling & or statistical analysis, and Machine Learning Having a working knowledge of using Python or R would be Responsibilities: Lead on projects that involve computational modelling and data analytics with a focus on Materials Science Design and execute commercial vision driven by data for our Computational Modelling and Data Science Team. Build and maintain strong relationships with customers and collaborators Familiarity with materials manufacturing processes and characterisation techniques Collaborate with team members along with communicating to the relevant stakeholders on technical matters Data Scientist- Business Manager/Machine Learning Engineer/CRM/Data Science/Stafford/Stone/Stoke-on-Trent/Burton-on-Trent/Cannock - £45,000 - £55,000 Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
CNC MILLER SETTER OPERATOR REPORTING TO: PRODUCTION MANAGER Due to my client's continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Miller Setter Operator to support Production. My client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, my client can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. At my client, we believe that good customer service is every bit as important as a strong product. DUTIES AND RESPONSIBILITIES INCLUDE: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Setting and operating milling machines to required tolerance Use of manual measuring equipment Tool setting on CNC Machines Programme proving of new products as and when required. Actively provide details of changes to correct/improve programs that go towards improving machining performance Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Use of Fanuc controls Tapping and Deburring where required Help and assist other members of the milling cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the [COMPANY] Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required THE IDEAL CANDIDATE MUST HAVE/SKILLS REQUIRED: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player EXPERIENCE IN THE FOLLOWING AREAS WILL BE REQUIRED: 3-5 Years relevant production experience Experience of Milling Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs DESIRABLE: Experience of a high-quality Manufacturing environment Have previously run Matsuura 3-4-5 axis milling machines or similar Minor Fanuc programme editing Excellent communication skills Good time management
29/04/2024
Full time
CNC MILLER SETTER OPERATOR REPORTING TO: PRODUCTION MANAGER Due to my client's continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Miller Setter Operator to support Production. My client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, my client can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. At my client, we believe that good customer service is every bit as important as a strong product. DUTIES AND RESPONSIBILITIES INCLUDE: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Setting and operating milling machines to required tolerance Use of manual measuring equipment Tool setting on CNC Machines Programme proving of new products as and when required. Actively provide details of changes to correct/improve programs that go towards improving machining performance Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Use of Fanuc controls Tapping and Deburring where required Help and assist other members of the milling cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the [COMPANY] Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required THE IDEAL CANDIDATE MUST HAVE/SKILLS REQUIRED: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player EXPERIENCE IN THE FOLLOWING AREAS WILL BE REQUIRED: 3-5 Years relevant production experience Experience of Milling Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs DESIRABLE: Experience of a high-quality Manufacturing environment Have previously run Matsuura 3-4-5 axis milling machines or similar Minor Fanuc programme editing Excellent communication skills Good time management
Project Design Engineer Chippenham Up to £55k Progressive Engineering and a Global Automotive Engineering Company, who work with Global Automotive OEM's, are looking to recruit a Project Design Engineer on a permanent basis for their Engineering HQ in the Chippenham area (Wiltshire), owing to succession planning, project pipeline and business forecast for 2024-27+. Reporting into the Engineering Manager, the Project Design Engineer will be working directly with Mechanical Systems Engineers at Automotive OEM's to design, develop, integrate & package my client's mechanical products onto new & existing Automotive On-Highway Platforms. Acting as the technical interface between Customer and internal Design/CAD, Build & Manufacturing Functions, the Project Design Engineer will be responsible for: Design study schedule, the design study budget and the consistency of the product design in relation to the specifications and customer expectations. Overseeing and validating the product design in compliance with the business rules. May manage one or several projects. Manages the functional analysis and product failure mode analysis (FMEA). Ensures the application of standards. Formalizes the design requirements to our suppliers. Presents internally and externally (customers) the adopted technical solutions. Contributes to maintain and develop the knowledge and expertise within the assigned area of responsibility. Takes an active role in technical meetings, project reviews. Manages plan developments and ensures the follow-up of existing products. For this Project Design Engineer role, my client is looking for a Project Design Engineer with the following Qualifications, Experience & Qualifications: Degree in Mechanical Engineering (or similar - Aerospace Engineering, Motorsport Engineering, Aeronautical Engineering etc) Experience as a Project Engineer within an Automotive Environment and/or for Automotive Applications/Automotive Customers Sound understanding of systems level design and translation down to components Experience working in a customer/client-facing environment Experience using 3D CAD Software (Inventor, Solidworks, ProE, Creo etc) to create concept Engineering Drawings Experience of using CAE Analysis & Simulation/FEA Package AND Hand/Engineering Calculations to validate and prove design concepts Experience & understanding of Engineering process tools (Functional Analysis/Product Failure Mode Analysis/FMEA, DVP&R, DMR etc) Understanding of production methods (injection moulding, aluminium extrusion etc) and material properties (metal, engineered plastic & rubber) Experience of GD&T/Geometric dimensioning and tolerancing/BS8888 For the successful Project Design Engineer, a salary up to £55,000 & package reflective of experience is on offer and this Project Design Engineer role is commutable from Bath, Corsham, Bristol, Lyneham, Royal Wootton Bassett, Trowbridge, Castle Combe, Malmesbury, Tetbury, Keynsham, Swindon, Cirencester, Stroud and Devizes. Some UK & International Travel is required to Customer & Manufacturing Sites for this Project Design Engineer role and my client does offer hybrid working after successful completion of the probation period. To be considered for this Project Design Engineer role, please apply via the link below. To find out more about Progressive Recruitment please visit our website Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
29/04/2024
Full time
Project Design Engineer Chippenham Up to £55k Progressive Engineering and a Global Automotive Engineering Company, who work with Global Automotive OEM's, are looking to recruit a Project Design Engineer on a permanent basis for their Engineering HQ in the Chippenham area (Wiltshire), owing to succession planning, project pipeline and business forecast for 2024-27+. Reporting into the Engineering Manager, the Project Design Engineer will be working directly with Mechanical Systems Engineers at Automotive OEM's to design, develop, integrate & package my client's mechanical products onto new & existing Automotive On-Highway Platforms. Acting as the technical interface between Customer and internal Design/CAD, Build & Manufacturing Functions, the Project Design Engineer will be responsible for: Design study schedule, the design study budget and the consistency of the product design in relation to the specifications and customer expectations. Overseeing and validating the product design in compliance with the business rules. May manage one or several projects. Manages the functional analysis and product failure mode analysis (FMEA). Ensures the application of standards. Formalizes the design requirements to our suppliers. Presents internally and externally (customers) the adopted technical solutions. Contributes to maintain and develop the knowledge and expertise within the assigned area of responsibility. Takes an active role in technical meetings, project reviews. Manages plan developments and ensures the follow-up of existing products. For this Project Design Engineer role, my client is looking for a Project Design Engineer with the following Qualifications, Experience & Qualifications: Degree in Mechanical Engineering (or similar - Aerospace Engineering, Motorsport Engineering, Aeronautical Engineering etc) Experience as a Project Engineer within an Automotive Environment and/or for Automotive Applications/Automotive Customers Sound understanding of systems level design and translation down to components Experience working in a customer/client-facing environment Experience using 3D CAD Software (Inventor, Solidworks, ProE, Creo etc) to create concept Engineering Drawings Experience of using CAE Analysis & Simulation/FEA Package AND Hand/Engineering Calculations to validate and prove design concepts Experience & understanding of Engineering process tools (Functional Analysis/Product Failure Mode Analysis/FMEA, DVP&R, DMR etc) Understanding of production methods (injection moulding, aluminium extrusion etc) and material properties (metal, engineered plastic & rubber) Experience of GD&T/Geometric dimensioning and tolerancing/BS8888 For the successful Project Design Engineer, a salary up to £55,000 & package reflective of experience is on offer and this Project Design Engineer role is commutable from Bath, Corsham, Bristol, Lyneham, Royal Wootton Bassett, Trowbridge, Castle Combe, Malmesbury, Tetbury, Keynsham, Swindon, Cirencester, Stroud and Devizes. Some UK & International Travel is required to Customer & Manufacturing Sites for this Project Design Engineer role and my client does offer hybrid working after successful completion of the probation period. To be considered for this Project Design Engineer role, please apply via the link below. To find out more about Progressive Recruitment please visit our website Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
A Design and Transition Manager is being sought at the start of a journey as our customer continue to transition to a Group IT function. This is a newly created position to be moulded by successful applicant. The successful candidate will be responsible for overseeing technology transitions and managing design projects. Client Details Our client is a well-established industrial and manufacturing company based in Gloucestershire. They are a large, international organisation with a workforce of over 7,500 employees globally. The company is known for its commitment to innovation and its state-of-the-art technology solutions. Description Accountable for establishing, documenting, and publicising the Service Design & Transition processes and strategy, which will include the Service Design Package & Service Level packages. Ensure the proposed solutions fit within the IT Operating model and IT Strategy. Guarantee all acceptance criteria and Go Live requirements have been met ensuring a seamless delivery into live operations. Provide Service Designs in the form of high to low-level Service Designs documenting and discussing with the relevant Service Owners or delegates what is required to deliver, operate, and manage the services to be consumed by the customer. Design and document how services and solutions will be monitored, maintained, and reported against, including what Service Levels the service will deliver (including contractual obligations, service level agreements, 3rd party service measurements and engagement approaches and any further metrics and KPIs). Assist in the development of existing ITIL processes (Incident, Request, Problem, Change, Capacity, Risk, etc) to ensure consistent application and delivery across all services and support teams. Manage the Service Design of a portfolio of projects - being responsible for the relevant documentation throughout the Project and Service Lifecycles. Manage the transition of new or changes to services into live, ensuring that they meet the standards and criteria for implementation into the production environment, including communicating to relevant stakeholders/customers on these changes. Collaborate with Project Managers, Finance, Procurement, Service Owners and technical individuals to ensure services, and non-functional requirements are documented, commercialised, and invoiced. Engage with a wide variety of stakeholders across a globally federated business across all levels, setting expectations and confirming requirements on the appropriate Design and Transition plans. Profile The successful Design and Transition Manager should have: Degree or relevant equivalent experience. ITILv4 Foundation required ITIL Service Design best practises Excellent interpersonal skills and a friendly and helpful attitude Ability to organise yourself and initiate work actions proactively. Ability to support others in driving actions to a completion. The confidence to challenge constructively and support others in doing the same. Outstanding communication skills, both written and verbal. Creative problem solver with the ability to deliver pragmatic solutions. Able to and encourage collaboration across teams and able to manage complex stakeholders. Demonstrable evidence of working effectively as part of a team. A strong sense of financial and commercial awareness. Understanding of Project Management methodologies Proven track record in Incident, Problem, Change, Release desired. The ability to communicate effectively with all levels of the business, up to director level. Job Offer On offer for the Design and Transition Manager is: A competitive salary in the range of £50,000 - £55,000 per annum. Hybrid working is welcomed, will be requirement to travel to Gloucestershire. An excellent benefits package including: Private Medical, Dental insurance, up to 10% company contribution toward pension, 27 days annual leave + much more The opportunity to work in an innovative, international company. A supportive work culture with a focus on employee development. We encourage all suitable candidates to apply for this exciting opportunity. This is a fantastic chance to join a leading company in the industrial and manufacturing industry and to further develop your career in technology management.
26/04/2024
Full time
A Design and Transition Manager is being sought at the start of a journey as our customer continue to transition to a Group IT function. This is a newly created position to be moulded by successful applicant. The successful candidate will be responsible for overseeing technology transitions and managing design projects. Client Details Our client is a well-established industrial and manufacturing company based in Gloucestershire. They are a large, international organisation with a workforce of over 7,500 employees globally. The company is known for its commitment to innovation and its state-of-the-art technology solutions. Description Accountable for establishing, documenting, and publicising the Service Design & Transition processes and strategy, which will include the Service Design Package & Service Level packages. Ensure the proposed solutions fit within the IT Operating model and IT Strategy. Guarantee all acceptance criteria and Go Live requirements have been met ensuring a seamless delivery into live operations. Provide Service Designs in the form of high to low-level Service Designs documenting and discussing with the relevant Service Owners or delegates what is required to deliver, operate, and manage the services to be consumed by the customer. Design and document how services and solutions will be monitored, maintained, and reported against, including what Service Levels the service will deliver (including contractual obligations, service level agreements, 3rd party service measurements and engagement approaches and any further metrics and KPIs). Assist in the development of existing ITIL processes (Incident, Request, Problem, Change, Capacity, Risk, etc) to ensure consistent application and delivery across all services and support teams. Manage the Service Design of a portfolio of projects - being responsible for the relevant documentation throughout the Project and Service Lifecycles. Manage the transition of new or changes to services into live, ensuring that they meet the standards and criteria for implementation into the production environment, including communicating to relevant stakeholders/customers on these changes. Collaborate with Project Managers, Finance, Procurement, Service Owners and technical individuals to ensure services, and non-functional requirements are documented, commercialised, and invoiced. Engage with a wide variety of stakeholders across a globally federated business across all levels, setting expectations and confirming requirements on the appropriate Design and Transition plans. Profile The successful Design and Transition Manager should have: Degree or relevant equivalent experience. ITILv4 Foundation required ITIL Service Design best practises Excellent interpersonal skills and a friendly and helpful attitude Ability to organise yourself and initiate work actions proactively. Ability to support others in driving actions to a completion. The confidence to challenge constructively and support others in doing the same. Outstanding communication skills, both written and verbal. Creative problem solver with the ability to deliver pragmatic solutions. Able to and encourage collaboration across teams and able to manage complex stakeholders. Demonstrable evidence of working effectively as part of a team. A strong sense of financial and commercial awareness. Understanding of Project Management methodologies Proven track record in Incident, Problem, Change, Release desired. The ability to communicate effectively with all levels of the business, up to director level. Job Offer On offer for the Design and Transition Manager is: A competitive salary in the range of £50,000 - £55,000 per annum. Hybrid working is welcomed, will be requirement to travel to Gloucestershire. An excellent benefits package including: Private Medical, Dental insurance, up to 10% company contribution toward pension, 27 days annual leave + much more The opportunity to work in an innovative, international company. A supportive work culture with a focus on employee development. We encourage all suitable candidates to apply for this exciting opportunity. This is a fantastic chance to join a leading company in the industrial and manufacturing industry and to further develop your career in technology management.
Site Contract & Commercial Officer Day Rate: £510 Inside IR35 Duration: 6 months Location: Hinkley Point C - Bridgwater, Somerset Hours: Full time on site/possibility to work 1 day a week from home Job Description: The Site Contract & Commercial Officer will take responsibility for commercial discussions regarding site activities with the customer, in close coordination with Paris C&C team. Responsible for contractual activities linked to site matters, among other coordinating Early Warnings and General communications, in close coordination with Paris C&C team. Facilitating daily interfaces between HPC (the Client) on site and Framatome Project Team. Main Responsibilities . Commercial topics . Coordinate with HPC to clarify Variation Requests (VAR) and Variation Proposals (VP) . Ensure communication with HPC (respectively Framatome) . When required, setup dedicated data room . Prepare and attend the Change & Opportunity Meetings Coordinate the Early Warnings management . Set-up and attend the Risk Reduction Meetings (RRM), and draft the related Minutes of Meeting . Follow-up the overall progress (from Early Warning's creation to closing, including actions resulting from Risks Mitigation Meetings) . Liaise with HPC to progress and clarify actions expected by HPC, and communicate to Framatome . Respectively, liaise with Framatome to progress and clarify actions expected by Framatome, and communicate to HPC . Prepare and lead the weekly meetings within Framatome . Prepare and lead the weekly meetings between HPC and Framatome . Prepare the monthly monitoring and related analyses General Communications (GCs) issued by HPC Where relevant, draft answers for Framatome Pilots' validation . Attend the weekly progress meetings with HPC Support the Contract Team based in La Défense . Manage any specific work delegated by the Framatome Contract Team in La Défense . Attend the monthly CCM (Contract and Commercial Meetings) between HPC and Framatome . Expedite, coordinate or lead actions raised in the monthly CCM Coordinate transverse topics . Ensure a smooth and effective communication between the respective CCM Teams (HPC and Framatome) . Collect any request from HPC related to Contract/Commercial, clarifies them where required and systematically transmits the requests to the corresponding Framatome Manager in France or in UK . Define with point(s) of contract in France or in UK the way and the timeframe to respond to HPC: preparation of the answer, internal validation before sending to HPC, presentation to HPC, additional clarifications (in any) . Collect any request from Framatome related to Contract/Commercial, clarifies them where required, transmits and explains the requests to the appropriate HPC members Key Skills and experiences: . Extensive experience in a similar role, ideally in Large Projects . Ideally worked on HPC more than 5 years experience in a similar role . Excellent communication skills . Results orientation, reliable, analytical capabilities, sense of synthesis . Customer orientation . English level: High-Elementary (Bright Test reference) at minimum . Computer literate: standard Microsoft package Qualifications . Bachelors degree is mandatory, Masters degree is desirable . Legal or Business School Degree Background: . Nuclear, Construction, Engineering, Large projects Additional information . Working hours - full time on site at Hinkley Point C
26/04/2024
Project-based
Site Contract & Commercial Officer Day Rate: £510 Inside IR35 Duration: 6 months Location: Hinkley Point C - Bridgwater, Somerset Hours: Full time on site/possibility to work 1 day a week from home Job Description: The Site Contract & Commercial Officer will take responsibility for commercial discussions regarding site activities with the customer, in close coordination with Paris C&C team. Responsible for contractual activities linked to site matters, among other coordinating Early Warnings and General communications, in close coordination with Paris C&C team. Facilitating daily interfaces between HPC (the Client) on site and Framatome Project Team. Main Responsibilities . Commercial topics . Coordinate with HPC to clarify Variation Requests (VAR) and Variation Proposals (VP) . Ensure communication with HPC (respectively Framatome) . When required, setup dedicated data room . Prepare and attend the Change & Opportunity Meetings Coordinate the Early Warnings management . Set-up and attend the Risk Reduction Meetings (RRM), and draft the related Minutes of Meeting . Follow-up the overall progress (from Early Warning's creation to closing, including actions resulting from Risks Mitigation Meetings) . Liaise with HPC to progress and clarify actions expected by HPC, and communicate to Framatome . Respectively, liaise with Framatome to progress and clarify actions expected by Framatome, and communicate to HPC . Prepare and lead the weekly meetings within Framatome . Prepare and lead the weekly meetings between HPC and Framatome . Prepare the monthly monitoring and related analyses General Communications (GCs) issued by HPC Where relevant, draft answers for Framatome Pilots' validation . Attend the weekly progress meetings with HPC Support the Contract Team based in La Défense . Manage any specific work delegated by the Framatome Contract Team in La Défense . Attend the monthly CCM (Contract and Commercial Meetings) between HPC and Framatome . Expedite, coordinate or lead actions raised in the monthly CCM Coordinate transverse topics . Ensure a smooth and effective communication between the respective CCM Teams (HPC and Framatome) . Collect any request from HPC related to Contract/Commercial, clarifies them where required and systematically transmits the requests to the corresponding Framatome Manager in France or in UK . Define with point(s) of contract in France or in UK the way and the timeframe to respond to HPC: preparation of the answer, internal validation before sending to HPC, presentation to HPC, additional clarifications (in any) . Collect any request from Framatome related to Contract/Commercial, clarifies them where required, transmits and explains the requests to the appropriate HPC members Key Skills and experiences: . Extensive experience in a similar role, ideally in Large Projects . Ideally worked on HPC more than 5 years experience in a similar role . Excellent communication skills . Results orientation, reliable, analytical capabilities, sense of synthesis . Customer orientation . English level: High-Elementary (Bright Test reference) at minimum . Computer literate: standard Microsoft package Qualifications . Bachelors degree is mandatory, Masters degree is desirable . Legal or Business School Degree Background: . Nuclear, Construction, Engineering, Large projects Additional information . Working hours - full time on site at Hinkley Point C
Job Title: Senior BIM Manager Location: Birmingham, UK Business Unit: Scruffy Dog UK Reports to: Director of Project Management Key Purpose of the Job (Position Summary) A Senior BIM Manager is responsible for overseeing all aspects of the BIM process throughout the project lifecycle, ensuring compliance with ISO 19650 standards as well as UK BIM Standards. And to work collaboratively with architects, engineers, sub consultants, Manufacturing, Production and other project stakeholders to achieve optimal project outcomes through effective BIM implementation. The role involves utilizing BIM software and methodologies to enhance project collaboration, efficiency, and accuracy. Key Responsibilities Develop and implement BIM execution plans BEP for projects and empower the team throughout implementation phase. Develop, implement, and maintain BIM standards, protocols, and workflows aligned with ISO 19650 requirements. Lead the creation and management of 3D models and associated BIM data. Foster collaboration and communication among project stakeholders to ensure accurate, timely, and coordinated BIM deliverables. Conduct and oversee BIM quality control and quality assurance (QC/QA) processes. Stay current with the latest BIM technologies and best practices. Define BIM standards, protocols, and workflows for the project team. Collaborate with project stakeholders to ensure BIM requirements are understood and met. Select, configure, and manage BIM software tools that align with project goals. Provide technical support and training to project team members on BIM software. Coordinate multidisciplinary design and construction teams through BIM collaboration. Manage and maintain the integrity of the project's BIM models and data. Oversee the integration of BIM data with other project management and analysis tools. Manage the flow of information between various project stakeholders through BIM. Ensure accurate and consistent data exchange between different phases of the project lifecycle. Perform regular reviews of BIM models to ensure compliance with project standards. Verify that models accurately represent the design intent and meet project requirements. Implement quality control processes to maintain data accuracy and consistency. Monitor project performance metrics related to BIM implementation and efficiency. Identify potential BIM-related risks and develop mitigation strategies. Ensure compliance with industry standards, codes, and regulations in BIM processes. Problem-solving skills and a proactive approach. Ability to manage multiple tasks and prioritize effectively. Strong communication, interpersonal, and collaboration skills. Excellent understanding of construction processes and building information modeling principles. Key Skills / Experience Required Educational Qualification Bachelor's or Master's degree in Architecture, Engineering, BIM or related Fields. Additional Qualifications / certifications RIBA Certification Computer skills ( Revit, Navisworks dynamo , Excel, Word, Outlook, Photoshop). Prior experience A minimum of 10 years experience in in the construction industry, Experience in the themed entertainment industry In-depth knowledge of ISO 19650 standards and their application in BIM workflows. Proven past experience in Mega BIM Project. Other skills (preferred) BEP creation BIM Software Information Management Industry Standards ISO 19650 Clash Detection Technical Drafting Autodesk Revit Autodesk AutoCAD BIM 360 / Autodesk Construction Cloud Navisworks Project Management SketchUp Enscape Rhinoceros Bluebeam Microsoft Office Suite Theme Parks Building and Structures Thematic Facade
08/04/2024
Full time
Job Title: Senior BIM Manager Location: Birmingham, UK Business Unit: Scruffy Dog UK Reports to: Director of Project Management Key Purpose of the Job (Position Summary) A Senior BIM Manager is responsible for overseeing all aspects of the BIM process throughout the project lifecycle, ensuring compliance with ISO 19650 standards as well as UK BIM Standards. And to work collaboratively with architects, engineers, sub consultants, Manufacturing, Production and other project stakeholders to achieve optimal project outcomes through effective BIM implementation. The role involves utilizing BIM software and methodologies to enhance project collaboration, efficiency, and accuracy. Key Responsibilities Develop and implement BIM execution plans BEP for projects and empower the team throughout implementation phase. Develop, implement, and maintain BIM standards, protocols, and workflows aligned with ISO 19650 requirements. Lead the creation and management of 3D models and associated BIM data. Foster collaboration and communication among project stakeholders to ensure accurate, timely, and coordinated BIM deliverables. Conduct and oversee BIM quality control and quality assurance (QC/QA) processes. Stay current with the latest BIM technologies and best practices. Define BIM standards, protocols, and workflows for the project team. Collaborate with project stakeholders to ensure BIM requirements are understood and met. Select, configure, and manage BIM software tools that align with project goals. Provide technical support and training to project team members on BIM software. Coordinate multidisciplinary design and construction teams through BIM collaboration. Manage and maintain the integrity of the project's BIM models and data. Oversee the integration of BIM data with other project management and analysis tools. Manage the flow of information between various project stakeholders through BIM. Ensure accurate and consistent data exchange between different phases of the project lifecycle. Perform regular reviews of BIM models to ensure compliance with project standards. Verify that models accurately represent the design intent and meet project requirements. Implement quality control processes to maintain data accuracy and consistency. Monitor project performance metrics related to BIM implementation and efficiency. Identify potential BIM-related risks and develop mitigation strategies. Ensure compliance with industry standards, codes, and regulations in BIM processes. Problem-solving skills and a proactive approach. Ability to manage multiple tasks and prioritize effectively. Strong communication, interpersonal, and collaboration skills. Excellent understanding of construction processes and building information modeling principles. Key Skills / Experience Required Educational Qualification Bachelor's or Master's degree in Architecture, Engineering, BIM or related Fields. Additional Qualifications / certifications RIBA Certification Computer skills ( Revit, Navisworks dynamo , Excel, Word, Outlook, Photoshop). Prior experience A minimum of 10 years experience in in the construction industry, Experience in the themed entertainment industry In-depth knowledge of ISO 19650 standards and their application in BIM workflows. Proven past experience in Mega BIM Project. Other skills (preferred) BEP creation BIM Software Information Management Industry Standards ISO 19650 Clash Detection Technical Drafting Autodesk Revit Autodesk AutoCAD BIM 360 / Autodesk Construction Cloud Navisworks Project Management SketchUp Enscape Rhinoceros Bluebeam Microsoft Office Suite Theme Parks Building and Structures Thematic Facade