Chief Data Officer Up to £140,000 + Bonus + Car Allowance Hertfordshire - Hybrid, 2 days per week We are representing a market-leading UK Financial Services business who are looking for a Chief Data Officer to join their organisation. The role will report into the CTO and regularly face-off directly to the Executive Committee. You will inherit a team of circa 25 and will have full ownership of the end-to-end data life cycle within the organisation, from Data Governance to Data Science & Analytics. Our client are early in their Data maturity so the role will require a real evangelist who can generate excitement and relevant use cases for how Data can improve the business. There is an existing Data Strategy, but it is in need of a refresh. Expect some work to centralise BI and reporting, where disparate teams exist throughout the business units. Due to being in a regulated environment, Data Governance is well established and similarly, there is new cloud-based Data Platform that should lay good foundations for Data Engineering work. Data Science is a particular area of interest for this business, but the capability is still in its infancy. We are looking for: Experience as a CDO or in Director/Head-of level Data roles Experience owning the full Data remit within an organisation, both technical and organisational Exposure to the Financial Services industry and relevant regulatory requirements This is a highly confidential search so we cannot divulge client details until interview request, candidates will be asked to sign an NDA. If this sounds of interest, please make an application.
20/05/2024
Full time
Chief Data Officer Up to £140,000 + Bonus + Car Allowance Hertfordshire - Hybrid, 2 days per week We are representing a market-leading UK Financial Services business who are looking for a Chief Data Officer to join their organisation. The role will report into the CTO and regularly face-off directly to the Executive Committee. You will inherit a team of circa 25 and will have full ownership of the end-to-end data life cycle within the organisation, from Data Governance to Data Science & Analytics. Our client are early in their Data maturity so the role will require a real evangelist who can generate excitement and relevant use cases for how Data can improve the business. There is an existing Data Strategy, but it is in need of a refresh. Expect some work to centralise BI and reporting, where disparate teams exist throughout the business units. Due to being in a regulated environment, Data Governance is well established and similarly, there is new cloud-based Data Platform that should lay good foundations for Data Engineering work. Data Science is a particular area of interest for this business, but the capability is still in its infancy. We are looking for: Experience as a CDO or in Director/Head-of level Data roles Experience owning the full Data remit within an organisation, both technical and organisational Exposure to the Financial Services industry and relevant regulatory requirements This is a highly confidential search so we cannot divulge client details until interview request, candidates will be asked to sign an NDA. If this sounds of interest, please make an application.
We are currently looking on behalf of one of our important clients for a Head of Laboratory Test Development & Validation (German Speaking). The role is a permanent position based in Bern Canton & comes with good home office allowance. Your Role: Oversee the personnel & technical management of a specialist group of 4 Engineers & 3 Laboratory Technicians. Develop & validate new physical measurement & testing methods. Provide technical support for Design Verification Laboratories. Hold responsibility for the operation & maintenance of a Development Laboratory. Plan, coordinate & execute measurement & testing orders in relation to Product Innovation & Product Development. Place, award & support contracts to external service providers if required. Your Skills: At least 5 years of relevant professional experience including experience within Development Laboratories. Skilled & experienced in Leading teams. Ideally experienced in Design Verification & the Medical Technology sector. Your Profile: Completed relevant Scientific or Technical University Degree. Communicative, strong leadership skills & solution-oriented. Fluent English & good German language skills (to at least B2 Level) are a mandatory requirement.
20/05/2024
Full time
We are currently looking on behalf of one of our important clients for a Head of Laboratory Test Development & Validation (German Speaking). The role is a permanent position based in Bern Canton & comes with good home office allowance. Your Role: Oversee the personnel & technical management of a specialist group of 4 Engineers & 3 Laboratory Technicians. Develop & validate new physical measurement & testing methods. Provide technical support for Design Verification Laboratories. Hold responsibility for the operation & maintenance of a Development Laboratory. Plan, coordinate & execute measurement & testing orders in relation to Product Innovation & Product Development. Place, award & support contracts to external service providers if required. Your Skills: At least 5 years of relevant professional experience including experience within Development Laboratories. Skilled & experienced in Leading teams. Ideally experienced in Design Verification & the Medical Technology sector. Your Profile: Completed relevant Scientific or Technical University Degree. Communicative, strong leadership skills & solution-oriented. Fluent English & good German language skills (to at least B2 Level) are a mandatory requirement.
Role: Structural Engineering Manager Contract Length: 18 Months Location: Aldermaston - 3 days/week on site Security Clearance: Active SC Minimum Requirement: AWE are seeking an enthusiastic team player to lead technical aspects of a facility design for a conventional new build project with a background in Civil Engineering Design, working in a project team acting as an intelligent customer to effectively manage external supply chain partners through the full product life cycle across multiple engineering disciplines. Applicants are invited from all highly regulated industries such as precision manufacturing or pharmaceutical are encouraged to apply. Knowledge of explosives facility design is an advantage. As an Engineering Manager, your primary responsibilities will include: Acting as the lead engineering representative on the project, overseeing delivery in terms of quality, safety, value for money, and schedule adherence. Serving as the primary point of contact for all engineering-related matters, providing expert guidance and support throughout the project life cycle. Collaborating with the Senior Engineering Manager to ensure the suitability and appropriateness of Engineering Requirements, advising on budget and program recommendations for design delivery. Evaluating the competency of engineering design resources, both internal and external, and ensuring adequacy through competency records management. Driving the development and delivery of Facility Designs, prioritizing safety, quality, cost-effectiveness, and lifetime value. Maintaining ongoing oversight of facility design progress through routine reviews, ensuring alignment with business needs and regulatory requirements. Managing Design Intent and Configuration Information from inception to project handover, while providing functional support for change implementation and improvement initiatives. Assisting in the development of AWE's Facility Design capability, including skills enhancement and resource development under the guidance of the Head of Design Engineering. Essential Requirements: HNC/HND or Degree qualification, ideally Chartered. Knowledge of CDM regulations desirable SC Clearance (essential) Background in Civil/Structural engineering Multidisciplinary engineering experience preferred. Strong stakeholder management skills at all levels. Previous experience in highly regulated industries Ability to capture engineering requirements and produce technical documentation and specifications. Demonstrated project team leadership throughout product design life cycle in particular, concept and detailed design phases.
20/05/2024
Role: Structural Engineering Manager Contract Length: 18 Months Location: Aldermaston - 3 days/week on site Security Clearance: Active SC Minimum Requirement: AWE are seeking an enthusiastic team player to lead technical aspects of a facility design for a conventional new build project with a background in Civil Engineering Design, working in a project team acting as an intelligent customer to effectively manage external supply chain partners through the full product life cycle across multiple engineering disciplines. Applicants are invited from all highly regulated industries such as precision manufacturing or pharmaceutical are encouraged to apply. Knowledge of explosives facility design is an advantage. As an Engineering Manager, your primary responsibilities will include: Acting as the lead engineering representative on the project, overseeing delivery in terms of quality, safety, value for money, and schedule adherence. Serving as the primary point of contact for all engineering-related matters, providing expert guidance and support throughout the project life cycle. Collaborating with the Senior Engineering Manager to ensure the suitability and appropriateness of Engineering Requirements, advising on budget and program recommendations for design delivery. Evaluating the competency of engineering design resources, both internal and external, and ensuring adequacy through competency records management. Driving the development and delivery of Facility Designs, prioritizing safety, quality, cost-effectiveness, and lifetime value. Maintaining ongoing oversight of facility design progress through routine reviews, ensuring alignment with business needs and regulatory requirements. Managing Design Intent and Configuration Information from inception to project handover, while providing functional support for change implementation and improvement initiatives. Assisting in the development of AWE's Facility Design capability, including skills enhancement and resource development under the guidance of the Head of Design Engineering. Essential Requirements: HNC/HND or Degree qualification, ideally Chartered. Knowledge of CDM regulations desirable SC Clearance (essential) Background in Civil/Structural engineering Multidisciplinary engineering experience preferred. Strong stakeholder management skills at all levels. Previous experience in highly regulated industries Ability to capture engineering requirements and produce technical documentation and specifications. Demonstrated project team leadership throughout product design life cycle in particular, concept and detailed design phases.
Sanderson Government & Defence
Gateshead, Tyne And Wear
Principal Engineer Gateshead (Onsite) £50k - £65k DOE Role details: We are working with a Defence Consultancy who provide innovative and complex defence solutions for land, sea and air. They design and build ruggedised electronic solutions for a wide range of applications and purposes. They are looking for a Principal Engineer to lead on all technical and engineering matters. Providing design, development, delivery and in-service support on a range of systems including Communications Information Services, Fighting Vehicles and Electronic Warfare. Responsibilities: Providing day to day technical and engineering consultancy. Liaison with clients, suppliers, Project Managers, senior managers, and other product & project stakeholders. Line Management of designated staff. Providing authorisation of documents and drawings pertinent to the designated field/product/project. Preparation of, and leading of various Reviews Requirements: Technical capability and an awareness of new developments in the associated field of engineering Ability to attend and lead client meetings and present visual presentations. Ability to breakdown tasks into a SOW and delegate tasks accordingly Competent to use a configuration management application to approve and direct document production. Eligibility: To be considered for the role, you must be eligible for UK Security Clearance.
20/05/2024
Full time
Principal Engineer Gateshead (Onsite) £50k - £65k DOE Role details: We are working with a Defence Consultancy who provide innovative and complex defence solutions for land, sea and air. They design and build ruggedised electronic solutions for a wide range of applications and purposes. They are looking for a Principal Engineer to lead on all technical and engineering matters. Providing design, development, delivery and in-service support on a range of systems including Communications Information Services, Fighting Vehicles and Electronic Warfare. Responsibilities: Providing day to day technical and engineering consultancy. Liaison with clients, suppliers, Project Managers, senior managers, and other product & project stakeholders. Line Management of designated staff. Providing authorisation of documents and drawings pertinent to the designated field/product/project. Preparation of, and leading of various Reviews Requirements: Technical capability and an awareness of new developments in the associated field of engineering Ability to attend and lead client meetings and present visual presentations. Ability to breakdown tasks into a SOW and delegate tasks accordingly Competent to use a configuration management application to approve and direct document production. Eligibility: To be considered for the role, you must be eligible for UK Security Clearance.
Job Advertisement: Azure Consultant Position: Azure Consultant Salary: £60k + £10-15k OTE Location: Flexible (Hybrid - 3 days in office, 2 days remote) Reports To: Head of Cloud - Technical About the Role: We are seeking an experienced Azure Consultant to join our pre-sales team, specializing in designing and architecting cloud solutions that leverage Microsoft Azure technologies. The ideal candidate will have a blend of technical expertise, customer-facing skills, and a deep understanding of Azure services. This position involves engaging with potential clients, understanding their business requirements, and presenting scalable, secure, and cost-effective Azure solutions. Key Responsibilities: Engage with potential clients to understand their business requirements, challenges, and technology landscape. Design and architect Azure solutions that meet clients' business and technical needs. Present and explain proposed solutions to clients, outlining technical details, value propositions, and implementation roadmaps. Collaborate with the sales team to align technical solutions with the client's business objectives. Conduct technical workshops and proof-of-concepts to demonstrate Azure solutions' feasibility and benefits. Stay updated with the latest Azure services, technologies, and industry trends. Act as a liaison between the sales and technical teams to ensure clear communication and alignment on solution design. Provide feedback to sales and product teams on client needs and market trends. Develop and maintain technical documentation related to solution architecture and design. Support the Professional Services team with project delivery and implementation when required. Qualifications and Experience: Bachelor's degree in Computer Science, Engineering, Information Technology, or related field is desirable. Certifications in Microsoft Azure, such as Azure Solutions Architect Expert or Azure Developer Associate, are highly desirable. Experience in customer-facing roles, preferably in pre-sales, consulting, or technical sales. Proficiency in designing and implementing cloud-based solutions, with a strong understanding of cloud architecture principles. Deep technical knowledge and hands-on experience with Microsoft Azure, including Azure Compute, Azure Storage, Azure Networking, Azure Security, and Azure Virtual Desktop. Excellent communication and presentation skills, with the ability to articulate complex technical concepts to non-technical audiences. Strong problem-solving skills and a strategic mindset. Ability to work in a fast-paced, team-oriented environment. What We Offer: Competitive salary starting at £60k + OTE. Flexible hybrid working arrangement (3 days in office, 2 days remote). Generous annual leave (25-30 days, plus public holidays, with optional 2 weeks unpaid leave). Subsidized healthcare/medical benefits. Progression and training programs, including mentoring and career development. Incentives and perks such as holidays, vouchers, lunches, and spot prizes. Top-of-the-range technology for office and remote work (laptops, screens, latest iPhone, etc.). Social events, supportive culture, and a fun, hardworking environment.
20/05/2024
Full time
Job Advertisement: Azure Consultant Position: Azure Consultant Salary: £60k + £10-15k OTE Location: Flexible (Hybrid - 3 days in office, 2 days remote) Reports To: Head of Cloud - Technical About the Role: We are seeking an experienced Azure Consultant to join our pre-sales team, specializing in designing and architecting cloud solutions that leverage Microsoft Azure technologies. The ideal candidate will have a blend of technical expertise, customer-facing skills, and a deep understanding of Azure services. This position involves engaging with potential clients, understanding their business requirements, and presenting scalable, secure, and cost-effective Azure solutions. Key Responsibilities: Engage with potential clients to understand their business requirements, challenges, and technology landscape. Design and architect Azure solutions that meet clients' business and technical needs. Present and explain proposed solutions to clients, outlining technical details, value propositions, and implementation roadmaps. Collaborate with the sales team to align technical solutions with the client's business objectives. Conduct technical workshops and proof-of-concepts to demonstrate Azure solutions' feasibility and benefits. Stay updated with the latest Azure services, technologies, and industry trends. Act as a liaison between the sales and technical teams to ensure clear communication and alignment on solution design. Provide feedback to sales and product teams on client needs and market trends. Develop and maintain technical documentation related to solution architecture and design. Support the Professional Services team with project delivery and implementation when required. Qualifications and Experience: Bachelor's degree in Computer Science, Engineering, Information Technology, or related field is desirable. Certifications in Microsoft Azure, such as Azure Solutions Architect Expert or Azure Developer Associate, are highly desirable. Experience in customer-facing roles, preferably in pre-sales, consulting, or technical sales. Proficiency in designing and implementing cloud-based solutions, with a strong understanding of cloud architecture principles. Deep technical knowledge and hands-on experience with Microsoft Azure, including Azure Compute, Azure Storage, Azure Networking, Azure Security, and Azure Virtual Desktop. Excellent communication and presentation skills, with the ability to articulate complex technical concepts to non-technical audiences. Strong problem-solving skills and a strategic mindset. Ability to work in a fast-paced, team-oriented environment. What We Offer: Competitive salary starting at £60k + OTE. Flexible hybrid working arrangement (3 days in office, 2 days remote). Generous annual leave (25-30 days, plus public holidays, with optional 2 weeks unpaid leave). Subsidized healthcare/medical benefits. Progression and training programs, including mentoring and career development. Incentives and perks such as holidays, vouchers, lunches, and spot prizes. Top-of-the-range technology for office and remote work (laptops, screens, latest iPhone, etc.). Social events, supportive culture, and a fun, hardworking environment.
Configuration Engineer £43ph (Umbrella, Inside IR35) Lincoln (Regular home working available) Initial 6 months An experienced Configuration Engineer is required for our Lincoln site, preferably within the Defence and Aerospace Sector; you will be required to discharge the 5 key Configuration activities into IPT's across all life cycle phases of a Programme. Within this role, you shall give clear direction into the IPT on C&DM process and tools be that at System Requirements, System level, Software, or hardware. In doing so, you must be prepared to 'challenge the norm' and support the IPT's in process tailoring to fit the life cycle phase and/or context of a Programme As a Configuration Engineer, you are expected to: Drive a pro-active approach to C&DM into IPT's Support the Head of Configuration and Data Management in encouraging new ideas and innovative solutions into the IPT and the Line of Business. (LoB) As an individual, you are expected: To resolve C&DM issues within an IPT by making proposals and driving through solutions To build and manage Customer and Supplier relationships To develop and promote knowledge and use of PLM Key Responsibility Areas Configuration Management Planning including generation and review of CM Plan Configuration Identification Change Control - Must have had experience in operating Change Control Boards including Configuration status input to the Board Configuration Status Accounting with emphasis on the generation of Configuration Baselines Verification and Audit (led FCA/PCA) Working hand-in-hand with our engineering delivery teams to ensure the Project dataset is maintained and configuration controlled Skills, Qualifications & Knowledge Required A good understanding of Configuration Management in accordance with DEF STAN 05-57. Excellent practical understanding of the five key elements of Configuration Management: Planning, Identification, Change Management, Status Accounting and Audit/Verification Document management experience including delivery and receipt within the bounds of ITAR and Export controls Software Configuration Management at the point of release into the Product structure Provided C&DM input to Design Reviews and Certification (Configuration Baseline Management) Strong Administration Skills with an attention to detail - you are required to have a logical mind-set
17/05/2024
Project-based
Configuration Engineer £43ph (Umbrella, Inside IR35) Lincoln (Regular home working available) Initial 6 months An experienced Configuration Engineer is required for our Lincoln site, preferably within the Defence and Aerospace Sector; you will be required to discharge the 5 key Configuration activities into IPT's across all life cycle phases of a Programme. Within this role, you shall give clear direction into the IPT on C&DM process and tools be that at System Requirements, System level, Software, or hardware. In doing so, you must be prepared to 'challenge the norm' and support the IPT's in process tailoring to fit the life cycle phase and/or context of a Programme As a Configuration Engineer, you are expected to: Drive a pro-active approach to C&DM into IPT's Support the Head of Configuration and Data Management in encouraging new ideas and innovative solutions into the IPT and the Line of Business. (LoB) As an individual, you are expected: To resolve C&DM issues within an IPT by making proposals and driving through solutions To build and manage Customer and Supplier relationships To develop and promote knowledge and use of PLM Key Responsibility Areas Configuration Management Planning including generation and review of CM Plan Configuration Identification Change Control - Must have had experience in operating Change Control Boards including Configuration status input to the Board Configuration Status Accounting with emphasis on the generation of Configuration Baselines Verification and Audit (led FCA/PCA) Working hand-in-hand with our engineering delivery teams to ensure the Project dataset is maintained and configuration controlled Skills, Qualifications & Knowledge Required A good understanding of Configuration Management in accordance with DEF STAN 05-57. Excellent practical understanding of the five key elements of Configuration Management: Planning, Identification, Change Management, Status Accounting and Audit/Verification Document management experience including delivery and receipt within the bounds of ITAR and Export controls Software Configuration Management at the point of release into the Product structure Provided C&DM input to Design Reviews and Certification (Configuration Baseline Management) Strong Administration Skills with an attention to detail - you are required to have a logical mind-set
Principal Mechanical Engineer - Cutting-Edge Engineering Firm Lynx is working with a global engineering company, to recruit a talented Principal Mechanical Engineer to join the team in Hampshire. This is a hybrid role that offers flexibility, competitive pay, and the opportunity to work on innovative projects in the energy sector. Key responsibilities: Spearhead the analysis and design of complex steel structures and storage tanks Utilise advanced software tools, including FEA, to develop cutting-edge designs Collaborate with clients, identify project risks, ensure compliance with quality standards Lead and mentor a team of skilled engineers and CAD technicians Drive continuous improvement in designs, workflows, and company standards Requirements: Degree in a relevant engineering discipline (Masters or PhD preferred)/Chartered Engineer status Minimum 6 years of experience in mechanical or structural engineering, including team leadership Strong knowledge of design codes (Eurocodes, API 620, EN 14620) and proficiency in analysis software (STAAD, ANSYS, CAESAR II, or similar) Excellent problem-solving, communication, and project management skills Ability to thrive in a multi-disciplinary, international team environment Offer Competitive salary up to £60,000 per annum, depending on experience Hybrid working model, providing flexibility and work-life balance Opportunities to lead projects and drive innovation in the industry Supportive, collaborative team environment with opportunities for career growth Comprehensive benefits package Don't miss this chance to join a world-class engineering firm. Apply now!
17/05/2024
Full time
Principal Mechanical Engineer - Cutting-Edge Engineering Firm Lynx is working with a global engineering company, to recruit a talented Principal Mechanical Engineer to join the team in Hampshire. This is a hybrid role that offers flexibility, competitive pay, and the opportunity to work on innovative projects in the energy sector. Key responsibilities: Spearhead the analysis and design of complex steel structures and storage tanks Utilise advanced software tools, including FEA, to develop cutting-edge designs Collaborate with clients, identify project risks, ensure compliance with quality standards Lead and mentor a team of skilled engineers and CAD technicians Drive continuous improvement in designs, workflows, and company standards Requirements: Degree in a relevant engineering discipline (Masters or PhD preferred)/Chartered Engineer status Minimum 6 years of experience in mechanical or structural engineering, including team leadership Strong knowledge of design codes (Eurocodes, API 620, EN 14620) and proficiency in analysis software (STAAD, ANSYS, CAESAR II, or similar) Excellent problem-solving, communication, and project management skills Ability to thrive in a multi-disciplinary, international team environment Offer Competitive salary up to £60,000 per annum, depending on experience Hybrid working model, providing flexibility and work-life balance Opportunities to lead projects and drive innovation in the industry Supportive, collaborative team environment with opportunities for career growth Comprehensive benefits package Don't miss this chance to join a world-class engineering firm. Apply now!
I am working with a well-known software consultancy in Edinburgh who are looking to recruit a Digital Transformation Consultant for their Edinburgh or Bristol office . The company: They are a thriving software company, focused on Digital Transformation and cloud consultancy. Their head office is in Edinburgh, and they have a wide-ranging list of clients from private, to government to public sector. They focus on designing and building software cloud solutions and digital transformation across some huge organisations and this is a pivotal role for them. They are hiring due to an internal restructure and this role will be reporting directly into the company's Managing Director. In relation to where you will work, this will be a combination of home based (majority) and some office working. Ideally, you could get into the Edinburgh office at the Gyle roughly twice a week, as you will be a senior figure and your presence will be of great benefit to the team. However, this role is working with a client down in Bristol, so you will likely visit them once a month. The role could also be based near Bristol, working remotely and close to the client. The role: In this role, you will lead the delivery of complex clients and programmes and will be a key member of the business. You will lead large-scale delivery with a focus on achieving client outcomes, developing senior client relationships (at the C-suite level) and doing this through effective delivery leadership. Your key responsibilities will include but are not limited to: * Leading a multi-disciplined team to drive highest levels of customer satisfaction * Leading on the implementation of the company strategy across one main client * Representing the business across the organisation, in front of clients and prospective clients * Maximising the return on sales and identifying opportunities * Lead on the development of the capability across Project Management, Architecture, Cloud and Software Development This is a client-facing role which combines strong leadership attributes working across all dimensions of the consultancy life cycle, including pre-sales, commercial, relationships, technology, delivery and people. Your background: * Previous experience working in a software/technology consultancy or large end-user * Background in a Senior Software Delivery role, working with large-scale clients and organisations * Strong appreciation of modern software engineering and associated development technologies and the full software development life cycle * Background in leading the delivery of large-scale, complex technology projects for clients, or lead a portfolio of client engagements * Ability to develop and maintain senior client/partner relationships * Contribute to the development of innovative propositions, ways of working and other thought leadership collateral This is an opportunity to work with a thriving and employee-first organisation. You will get to work with some huge organisations whilst leading and working alongside some very bright minds. If you are interested, please apply or call Hamish at Cathcart Technology for a chat.
17/05/2024
Full time
I am working with a well-known software consultancy in Edinburgh who are looking to recruit a Digital Transformation Consultant for their Edinburgh or Bristol office . The company: They are a thriving software company, focused on Digital Transformation and cloud consultancy. Their head office is in Edinburgh, and they have a wide-ranging list of clients from private, to government to public sector. They focus on designing and building software cloud solutions and digital transformation across some huge organisations and this is a pivotal role for them. They are hiring due to an internal restructure and this role will be reporting directly into the company's Managing Director. In relation to where you will work, this will be a combination of home based (majority) and some office working. Ideally, you could get into the Edinburgh office at the Gyle roughly twice a week, as you will be a senior figure and your presence will be of great benefit to the team. However, this role is working with a client down in Bristol, so you will likely visit them once a month. The role could also be based near Bristol, working remotely and close to the client. The role: In this role, you will lead the delivery of complex clients and programmes and will be a key member of the business. You will lead large-scale delivery with a focus on achieving client outcomes, developing senior client relationships (at the C-suite level) and doing this through effective delivery leadership. Your key responsibilities will include but are not limited to: * Leading a multi-disciplined team to drive highest levels of customer satisfaction * Leading on the implementation of the company strategy across one main client * Representing the business across the organisation, in front of clients and prospective clients * Maximising the return on sales and identifying opportunities * Lead on the development of the capability across Project Management, Architecture, Cloud and Software Development This is a client-facing role which combines strong leadership attributes working across all dimensions of the consultancy life cycle, including pre-sales, commercial, relationships, technology, delivery and people. Your background: * Previous experience working in a software/technology consultancy or large end-user * Background in a Senior Software Delivery role, working with large-scale clients and organisations * Strong appreciation of modern software engineering and associated development technologies and the full software development life cycle * Background in leading the delivery of large-scale, complex technology projects for clients, or lead a portfolio of client engagements * Ability to develop and maintain senior client/partner relationships * Contribute to the development of innovative propositions, ways of working and other thought leadership collateral This is an opportunity to work with a thriving and employee-first organisation. You will get to work with some huge organisations whilst leading and working alongside some very bright minds. If you are interested, please apply or call Hamish at Cathcart Technology for a chat.
Senior Document Controller Initial 12 month contract Leatherhead (Hybrid) £30 per hour. Umbrella. Advantage Resourcing are working in partnership with a large engineering organisation who are currently seeking a Document Controller to work on an offshore project Your responsibilities will include: Under broad direction, oversees and performs the full range of activities with associated with document management work on a Project. Coordinate execution of the document management plan and procedures. Collaborates within the department, and the Client and customer, to ensure work processes are aligned with project processes and contractual requirements. Ensure document management deliverables are understood and delivered to contract, quality, and schedule requirements. Ensures the correct implementation, utilization, maintenance and use of the Document Management processes, systems, tools eg, IPMS, Documentum, SharePoint etc. This role is to support client with their document management system and processes and to interface with engineering contractors. Skills Required: Communicate/liaison with Project Management & Team, Client and Sub-Contractors effectively and resolve problems & issues relating to documentation, information and associated data. Proficient in Engineering & Supplier Document distribution management. Define and develop Project Document reports and statistics. Work within an integrated, multi-location, Document Management team. Communicates regularly with Document Management employees in various global offices by use of briefing sessions to share knowledge, best practices and lessons learned. Production and update of Master Document Register. Manage development and update of Distribution Matrix Production and update of Supplier SDRL/SDLs within Project EDMS Operate Document Request for Release process. If you are a Senior Document Controller seeking a new opportunity, please apply now. Reference: 72884 Hafsa Akram
17/05/2024
Project-based
Senior Document Controller Initial 12 month contract Leatherhead (Hybrid) £30 per hour. Umbrella. Advantage Resourcing are working in partnership with a large engineering organisation who are currently seeking a Document Controller to work on an offshore project Your responsibilities will include: Under broad direction, oversees and performs the full range of activities with associated with document management work on a Project. Coordinate execution of the document management plan and procedures. Collaborates within the department, and the Client and customer, to ensure work processes are aligned with project processes and contractual requirements. Ensure document management deliverables are understood and delivered to contract, quality, and schedule requirements. Ensures the correct implementation, utilization, maintenance and use of the Document Management processes, systems, tools eg, IPMS, Documentum, SharePoint etc. This role is to support client with their document management system and processes and to interface with engineering contractors. Skills Required: Communicate/liaison with Project Management & Team, Client and Sub-Contractors effectively and resolve problems & issues relating to documentation, information and associated data. Proficient in Engineering & Supplier Document distribution management. Define and develop Project Document reports and statistics. Work within an integrated, multi-location, Document Management team. Communicates regularly with Document Management employees in various global offices by use of briefing sessions to share knowledge, best practices and lessons learned. Production and update of Master Document Register. Manage development and update of Distribution Matrix Production and update of Supplier SDRL/SDLs within Project EDMS Operate Document Request for Release process. If you are a Senior Document Controller seeking a new opportunity, please apply now. Reference: 72884 Hafsa Akram
Location: Cambridge We're seeking an experienced Lead Mechatronic Engineer to spearhead the development of our autonomous harvesting robot. In this role, you'll design, build, and test prototypes, ensuring the system's robustness and manufacturability for market readiness. Responsibilities: Lead the design and development of the robotic platform for precision harvesting. Integrate sensors, electronics, software, and electromechanical devices into cost-effective designs. Collaborate with cross-functional teams on system integration and manufacturing processes. Conduct field trials and validation at grower sites. Manage projects, partnerships, and suppliers to meet timelines and budgets. Present technical reports and updates to senior leadership. Oversee CAD and PDM infrastructure, providing training and support. Qualifications/Experience: Degree in Mechatronic Engineering or equivalent. 5+ years of product development experience in robotics or manufacturing. Expertise in SolidWorks, Altium, and the full product development life cycle. Proficient in 3D CAD modelling, tolerance analysis, and design for manufacturability. Ability to lead projects, interpret customer needs, and translate requirements. Skilled in managing multiple projects, deadlines, and priorities. Experience with design for manufacturing principles and FEA (preferred). Familiarity with robot arm actuators, end-effectors/grippers, and soft robotics. Strong problem-solving, analytical, and organizational skills. Excellent team player with the ability to work autonomously. Proficient in MS Office tools Job Types: Full-time, Permanent
16/05/2024
Full time
Location: Cambridge We're seeking an experienced Lead Mechatronic Engineer to spearhead the development of our autonomous harvesting robot. In this role, you'll design, build, and test prototypes, ensuring the system's robustness and manufacturability for market readiness. Responsibilities: Lead the design and development of the robotic platform for precision harvesting. Integrate sensors, electronics, software, and electromechanical devices into cost-effective designs. Collaborate with cross-functional teams on system integration and manufacturing processes. Conduct field trials and validation at grower sites. Manage projects, partnerships, and suppliers to meet timelines and budgets. Present technical reports and updates to senior leadership. Oversee CAD and PDM infrastructure, providing training and support. Qualifications/Experience: Degree in Mechatronic Engineering or equivalent. 5+ years of product development experience in robotics or manufacturing. Expertise in SolidWorks, Altium, and the full product development life cycle. Proficient in 3D CAD modelling, tolerance analysis, and design for manufacturability. Ability to lead projects, interpret customer needs, and translate requirements. Skilled in managing multiple projects, deadlines, and priorities. Experience with design for manufacturing principles and FEA (preferred). Familiarity with robot arm actuators, end-effectors/grippers, and soft robotics. Strong problem-solving, analytical, and organizational skills. Excellent team player with the ability to work autonomously. Proficient in MS Office tools Job Types: Full-time, Permanent
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
16/05/2024
Full time
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
Strategic: By supporting the project in the areas of team organization, documentation control and cost allocation in SAP/WBS, the project liaison team leader will see their role and responsibility increase with the development of the project through the design phases. Every new design phase will bring additional needs and workload, driven by the implementation and closure phases requiring a higher contribution of this function, thus a higher need of good coordination. This function provides an important assistance to the design engineers by allowing them to focus mainly in the engineering design and removing from them the workload of project organization tasks. The project liaison team leader has a key role in expansion projects to guarantee that all purchase orders of the project are correctly allocated to the correspondent WBS, hence guaranteeing a good knowledge and control of the project budget, as well as, the documentation generated by the project is correctly logged, distributed and archived Scope of the mission Integrating the project team, the project liaison team leader is responsible to lead the team which coordinates project documentation flows and archive, establishes systems to manage/track purchase orders and goods receipts, responsible management of miscellaneous non-PO purchases, establish and maintain systems for allocation of project costs in SAP/WBS, and all aspects related with the organization of the engineering team: welcoming new team members, developing individualized onboarding plans, support their needs, organize the project gate reviews and monthly review meetings Primary Tasks and responsibilities: . Onboarding of new employees: o Lead, with support from the Regional Program Director, in onboarding of new employees to the engineering organization o Work with new employees' direct supervisors to develop individual training plans tailored to the needs of their role, along with base knowledge/expectations of the engineering organization o Plan and prepare the logistic needs for new team members, including system/security access, supplies/equipment, travel arrangements, and other business support. * Cost control: o Establish and maintain systems to issue and track purchase orders in SAP, guaranteeing correct WBS allocation o Coach and Support Project Liaison to issue and track Shopping Carts (SCs), Purchase Orders (POs) and goods receipts (GRs) in SAP in a timely manner o Coach and Support Project Controls to Actively manage SAP/WBS cost allocation and highlight variations o Provide actuals per WBS to support forecasting by Project Managers o Stewardship of Engineering procurement card (ProCard) for all non-travel related miscellaneous purchases, ensuring appropriate use of Procard vs Purchase Order, leadership approval according to Local Approval Matrix (LAM) o Consolidate quarterly and monthly project cost forecast reported by PM o Update forecasts in Planisware o Oversee updating of SAP/ARIBA files o Monthly Headcount allocation to appropriate WBS accounts for all active projects & waves within the region/site o Report actual costs of the yearly Engineering department budgets * Leadership of the Liaison Team o Manage of daily miscellaneous requirements and admin tasks o Manage and delegate administrative tasks and project priorities o Manage and delegate department administrative work such as organizing the monthly department meetings, annual outing, travel, visitors, teambuilding activities, etc o Maintain and manage a healthy and motivating work environment o Improve and formalize monthly departmental reports/meeting * Leadership of the Document Control Team: o Organize, distribute and archive all project documents, guaranteeing proper archiving rules to support claims to contractors and EPCm partners o Manage the project folder access Matrix, maintain project transmittals, archiving engineering deliverables and permitting docs on project Servers * Department Communication: o Responsible for all aspect of internal and external communication within local Engineering department o Manage visual branding display in department o Work closely with HR/GSS/EHS team * Facilities management: o Responsible for facilities operations within the department o Liaise with facilities contractors, responsible to maintain engineering facilities o Managing repairs, maintenance and replacement in the engineering facilities o Working together with EHS regarding fire safety procedures in the engineering facilities * General duties: o Carry out assigned tasks and duties in a safe manner, in accordance with instructions, and to comply with environmental, health & safety rules/procedures, regulations and codes of practice. o Perform engineering and technical support to the projects when needed, undertaking any additional tasks commensurate with the role as and when required. o rules and procedures set down: Technical Profile requirements: . University degree or College diploma specializing in business administration or a technical field . Experience and/or background in industrial companies, preferably linked to engineering or . operations . Competent and fluent (written and verbal) in Spanish and English . Computer literacy with good working knowledge of the MS Office package . Experience with SAP and Ariba software . Knowledge of EHS standards and industry good practices . Must have the Knowledge, Experience and Skills to conduct their tasks in accordance with the Non-Technical Profile Requirements : . Organized . Team worker . Result oriented and timely delivery . Positive mindset . Capable to work in Matrix organizations . Problem and conflict solver . Flexible and resilient to work in ambiguous situations with limited supervision . Coaching skills . Good communication Location: . North of Spain, exact location remains confidential till at least early July . Until EOY 2024 remote work, afterwards consultants are expected to work onsite Business Travel: . Travel will be required and outside Spain reimbursed via expenses Contract: . Long term contract . Confirmation of the mission will take place before 1/7 . Official confirmation and contract creation scheduled for early July Start: . Objective +- 1st of August . Consultants can perform notice if 4-6 weeks, longer is to discuss with the manager . Consultants cannot take long holidays in July/August after start due to the high workload Languages: . Fluent In Spanish & English Rate: . Market-level Rates for Spain . All-in Rate for Remote and local presence at SPAIN . No expenses accepted Reason for Hire Specific Skills Required for Project Safety Equipment Not applicable (keep in mind that for Olen and Hoboken sites a neon vest is mandatory) Additional Safety Equipment to be provided by Supplier n.a. Travel Required? Yes Travel percentage- 10%
16/05/2024
Full time
Strategic: By supporting the project in the areas of team organization, documentation control and cost allocation in SAP/WBS, the project liaison team leader will see their role and responsibility increase with the development of the project through the design phases. Every new design phase will bring additional needs and workload, driven by the implementation and closure phases requiring a higher contribution of this function, thus a higher need of good coordination. This function provides an important assistance to the design engineers by allowing them to focus mainly in the engineering design and removing from them the workload of project organization tasks. The project liaison team leader has a key role in expansion projects to guarantee that all purchase orders of the project are correctly allocated to the correspondent WBS, hence guaranteeing a good knowledge and control of the project budget, as well as, the documentation generated by the project is correctly logged, distributed and archived Scope of the mission Integrating the project team, the project liaison team leader is responsible to lead the team which coordinates project documentation flows and archive, establishes systems to manage/track purchase orders and goods receipts, responsible management of miscellaneous non-PO purchases, establish and maintain systems for allocation of project costs in SAP/WBS, and all aspects related with the organization of the engineering team: welcoming new team members, developing individualized onboarding plans, support their needs, organize the project gate reviews and monthly review meetings Primary Tasks and responsibilities: . Onboarding of new employees: o Lead, with support from the Regional Program Director, in onboarding of new employees to the engineering organization o Work with new employees' direct supervisors to develop individual training plans tailored to the needs of their role, along with base knowledge/expectations of the engineering organization o Plan and prepare the logistic needs for new team members, including system/security access, supplies/equipment, travel arrangements, and other business support. * Cost control: o Establish and maintain systems to issue and track purchase orders in SAP, guaranteeing correct WBS allocation o Coach and Support Project Liaison to issue and track Shopping Carts (SCs), Purchase Orders (POs) and goods receipts (GRs) in SAP in a timely manner o Coach and Support Project Controls to Actively manage SAP/WBS cost allocation and highlight variations o Provide actuals per WBS to support forecasting by Project Managers o Stewardship of Engineering procurement card (ProCard) for all non-travel related miscellaneous purchases, ensuring appropriate use of Procard vs Purchase Order, leadership approval according to Local Approval Matrix (LAM) o Consolidate quarterly and monthly project cost forecast reported by PM o Update forecasts in Planisware o Oversee updating of SAP/ARIBA files o Monthly Headcount allocation to appropriate WBS accounts for all active projects & waves within the region/site o Report actual costs of the yearly Engineering department budgets * Leadership of the Liaison Team o Manage of daily miscellaneous requirements and admin tasks o Manage and delegate administrative tasks and project priorities o Manage and delegate department administrative work such as organizing the monthly department meetings, annual outing, travel, visitors, teambuilding activities, etc o Maintain and manage a healthy and motivating work environment o Improve and formalize monthly departmental reports/meeting * Leadership of the Document Control Team: o Organize, distribute and archive all project documents, guaranteeing proper archiving rules to support claims to contractors and EPCm partners o Manage the project folder access Matrix, maintain project transmittals, archiving engineering deliverables and permitting docs on project Servers * Department Communication: o Responsible for all aspect of internal and external communication within local Engineering department o Manage visual branding display in department o Work closely with HR/GSS/EHS team * Facilities management: o Responsible for facilities operations within the department o Liaise with facilities contractors, responsible to maintain engineering facilities o Managing repairs, maintenance and replacement in the engineering facilities o Working together with EHS regarding fire safety procedures in the engineering facilities * General duties: o Carry out assigned tasks and duties in a safe manner, in accordance with instructions, and to comply with environmental, health & safety rules/procedures, regulations and codes of practice. o Perform engineering and technical support to the projects when needed, undertaking any additional tasks commensurate with the role as and when required. o rules and procedures set down: Technical Profile requirements: . University degree or College diploma specializing in business administration or a technical field . Experience and/or background in industrial companies, preferably linked to engineering or . operations . Competent and fluent (written and verbal) in Spanish and English . Computer literacy with good working knowledge of the MS Office package . Experience with SAP and Ariba software . Knowledge of EHS standards and industry good practices . Must have the Knowledge, Experience and Skills to conduct their tasks in accordance with the Non-Technical Profile Requirements : . Organized . Team worker . Result oriented and timely delivery . Positive mindset . Capable to work in Matrix organizations . Problem and conflict solver . Flexible and resilient to work in ambiguous situations with limited supervision . Coaching skills . Good communication Location: . North of Spain, exact location remains confidential till at least early July . Until EOY 2024 remote work, afterwards consultants are expected to work onsite Business Travel: . Travel will be required and outside Spain reimbursed via expenses Contract: . Long term contract . Confirmation of the mission will take place before 1/7 . Official confirmation and contract creation scheduled for early July Start: . Objective +- 1st of August . Consultants can perform notice if 4-6 weeks, longer is to discuss with the manager . Consultants cannot take long holidays in July/August after start due to the high workload Languages: . Fluent In Spanish & English Rate: . Market-level Rates for Spain . All-in Rate for Remote and local presence at SPAIN . No expenses accepted Reason for Hire Specific Skills Required for Project Safety Equipment Not applicable (keep in mind that for Olen and Hoboken sites a neon vest is mandatory) Additional Safety Equipment to be provided by Supplier n.a. Travel Required? Yes Travel percentage- 10%
Python Back End engineers are required by this leading Product company as they look to bring their development back in-house and build out the functionality on an already-successful platform operating in a niche space with a fantastic client base.You will be spearheading the creation and deployment of ground-breaking software solutions Key Responsibilities: Work as part of a cross-functional team to help drive the development of new features Lead change, innovation, and drive transformation within our teams: your expertise will identify opportunities for improvement in our Front End applications, tooling, and architecture. Ensure best practices and patterns: you will advocate and enforce best standards, and patterns. Your deep understanding of Front End technologies will help you to guide your peers - ensuring that our code is of high quality. Work on automation and process improvement: you will increase efficiency, reliability, and scalability, by creating automated processes that improve development workflows. Promote engineering ways of working: by taking the lead in establishing the importance of engineering first principles in your team and ensuring they are followed. Collaborate and share knowledge: you will engage with the engineering community, using your expertise to contribute to events and knowledge-sharing initiatives. You will inspire and motivate your peers to learn - improving their capabilities. Participate in hiring new engineers: you will be part of the interview and hiring process, using your experience and insights to identify top talent. You will help build the engineering team. Required Skills and Qualifications: Significant experience in API and web application development using Python with Flask and/or FastAPI Experience with creating REST APIs Experience with Cloud Functions, ideally in Google Cloud/Terraform Experience with containerisation - Docker/Kubernetes Ability to design architectures to meet scalability, reliability and security targets Good problem-solving skills with an emphasis on product development In-depth understanding of best practices, coding standards, and architectural patterns in Back End development. Experience in automating builds, code checks, and releases using industry-standard tools. Knowledge and experience of Agile methodologies and practices Experience of B2B2C SaaS products would be an advantage The role requires 2 days a week in the London office
15/05/2024
Full time
Python Back End engineers are required by this leading Product company as they look to bring their development back in-house and build out the functionality on an already-successful platform operating in a niche space with a fantastic client base.You will be spearheading the creation and deployment of ground-breaking software solutions Key Responsibilities: Work as part of a cross-functional team to help drive the development of new features Lead change, innovation, and drive transformation within our teams: your expertise will identify opportunities for improvement in our Front End applications, tooling, and architecture. Ensure best practices and patterns: you will advocate and enforce best standards, and patterns. Your deep understanding of Front End technologies will help you to guide your peers - ensuring that our code is of high quality. Work on automation and process improvement: you will increase efficiency, reliability, and scalability, by creating automated processes that improve development workflows. Promote engineering ways of working: by taking the lead in establishing the importance of engineering first principles in your team and ensuring they are followed. Collaborate and share knowledge: you will engage with the engineering community, using your expertise to contribute to events and knowledge-sharing initiatives. You will inspire and motivate your peers to learn - improving their capabilities. Participate in hiring new engineers: you will be part of the interview and hiring process, using your experience and insights to identify top talent. You will help build the engineering team. Required Skills and Qualifications: Significant experience in API and web application development using Python with Flask and/or FastAPI Experience with creating REST APIs Experience with Cloud Functions, ideally in Google Cloud/Terraform Experience with containerisation - Docker/Kubernetes Ability to design architectures to meet scalability, reliability and security targets Good problem-solving skills with an emphasis on product development In-depth understanding of best practices, coding standards, and architectural patterns in Back End development. Experience in automating builds, code checks, and releases using industry-standard tools. Knowledge and experience of Agile methodologies and practices Experience of B2B2C SaaS products would be an advantage The role requires 2 days a week in the London office
iO Associates are looking for Mechanical Fitter to develop manufacturing technology and realize new products and systems. Set up, monitor and operate various piece of equipment associated with the manufacturing facility requirements to undertake the Assembly and Test Surface Pressure Control equipment. Their cutting-edge solutions and services are advancing the energy industry and making it safer, cleaner, and more effective for people and the environment. They are based on a century of experience and do business in over 120 countries. Job Title: Mechanical Fitter Location: Aberdeen, Aberdeenshire Duration: 12 months contract to permanent. Hours: Dayshift (07:00 - 15:30) Backshift (15:30 - 00:00) (shift pattern is on a rotational basis from week to week) Responsibilities: Carrying out Test & Assembly of Surface Wellhead Products. New build manufacture & repair work scopes. Strip, inspection, assembly & repair. Pressure Testing Surface Wellhead equipment. Assembling Surface Wellhead equipment and components from specifications and drawings for customer requirements. Recording defects and errors in line with company procedures. Engaging with safety initiatives on site, especially HRO councils eg pressure safety/lifting. To be successful in this role you will: Hold a relevant qualification or demonstrate substantial experience in lieu of qualification. Have experience working on Surface Wellhead equipment. Have good knowledge of HSE requirements and be able to follow safety policies and procedures. If you are looking to work for a company that gives you a career framework with a clear development path, please reply with your CV and references.
15/05/2024
iO Associates are looking for Mechanical Fitter to develop manufacturing technology and realize new products and systems. Set up, monitor and operate various piece of equipment associated with the manufacturing facility requirements to undertake the Assembly and Test Surface Pressure Control equipment. Their cutting-edge solutions and services are advancing the energy industry and making it safer, cleaner, and more effective for people and the environment. They are based on a century of experience and do business in over 120 countries. Job Title: Mechanical Fitter Location: Aberdeen, Aberdeenshire Duration: 12 months contract to permanent. Hours: Dayshift (07:00 - 15:30) Backshift (15:30 - 00:00) (shift pattern is on a rotational basis from week to week) Responsibilities: Carrying out Test & Assembly of Surface Wellhead Products. New build manufacture & repair work scopes. Strip, inspection, assembly & repair. Pressure Testing Surface Wellhead equipment. Assembling Surface Wellhead equipment and components from specifications and drawings for customer requirements. Recording defects and errors in line with company procedures. Engaging with safety initiatives on site, especially HRO councils eg pressure safety/lifting. To be successful in this role you will: Hold a relevant qualification or demonstrate substantial experience in lieu of qualification. Have experience working on Surface Wellhead equipment. Have good knowledge of HSE requirements and be able to follow safety policies and procedures. If you are looking to work for a company that gives you a career framework with a clear development path, please reply with your CV and references.
Position Available: Manufacturing Technician Location: Henlow & Dynamic Working Hours Salary: Up to £39,000 + Paid Overtime & Company Bonus & Very Good Pension Package + Subsidised Canteen About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Mechanical Manufacturing Technician to work in our team. In this role you will support the team in: Ensuring manufacturing build times are met. Maintaining a safe working environment and a good housekeeping policy. Ensuring compliance across all stages of the manufacturing process. Communicating best practice to other team members. Maintaining product certification and approval via regular audits. Certifying products in line with product certification procedures. What we need from you: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 is essential for this role. Formal further education certificate to HNC or equivalent certificate is a plus. Ideally have manual handling training but not essential, training can be provided. Ideally training (Including overhead cranes) but not essential, training can be provided. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable. If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
15/05/2024
Full time
Position Available: Manufacturing Technician Location: Henlow & Dynamic Working Hours Salary: Up to £39,000 + Paid Overtime & Company Bonus & Very Good Pension Package + Subsidised Canteen About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Mechanical Manufacturing Technician to work in our team. In this role you will support the team in: Ensuring manufacturing build times are met. Maintaining a safe working environment and a good housekeeping policy. Ensuring compliance across all stages of the manufacturing process. Communicating best practice to other team members. Maintaining product certification and approval via regular audits. Certifying products in line with product certification procedures. What we need from you: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 is essential for this role. Formal further education certificate to HNC or equivalent certificate is a plus. Ideally have manual handling training but not essential, training can be provided. Ideally training (Including overhead cranes) but not essential, training can be provided. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable. If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Project Leader months + +On site in Broughton - Chester +Inside IR35 Skills: +Project Management tools +Understanding of Wing Operational processes Accountabilities include: Provide Industrial assessments (MOD) at all project milestone gates ensuring that all Broughton Plant requirements are included. Define & monitor an industrial top level project plan for each modification and/or new development project Ensure the alignment of all plans with central programme requirements and individual functional stakeholders Contribute to resource planning workload and funding requirements Ensure all plans are produced and managed to a level of detail to ensure the accurate delivery of time, cost, quality and safety requirements Ensure regular engagement and communication with programme work package managers/MFT leaders to enable the management and appropriate escalation of project risks and opportunities. Apply a risk & opportunity review process including the maintenance of a local risk & opportunities register and reporting chart. Exploit opportunities to introduce improvements to the product industrial system and identify potential design improvements, without introducing risk to the programme. Chair the weekly governance process inclusive of project leaders and key stakeholders. Lead and develop a team of Local Representatives Develop and deploy, with Operational support, communication and awareness training into the Operations team (including line-side support functions) and engagement of the operational stakeholders Provide Local Representative support and leadership of issue resolution during development builds and regular progress reports. Support the OSWX team governance process inclusive of improving the ways of working through Project Management principles Deputise for Single Aisle HO Industrialization Main Activities Drive a "Safety First" culture in the team Chairing Project reviews Manage Project plans Project Industrial Assessments Chair Risk & Opportunity reviews Project governance review participant Project milestone review contributor. Design review participant. Coordinate & manage industrial trials Support Flight Test A/C refurbishment programmes Managing Local Representative (BC) resource Monitoring Balance Scorecard performance Deputising for Head Of Industrialisation. Outputs Successful industrialization of all new developments, modifications and flight test A/Crefurbishment via:- Project review action tracker Project Plan Risk & opportunities register. Project issue tracker. Stakeholder Engagement and Management Operational Communication packs. Project closure documentation. Lessons learned and continuous improvement Blue collar development plan. Skillset and Experience: Essential: Understanding of Wing Operational processes Good communication and negotiating skills. Experience and successful demonstration of managing similar MFT projects. Application of project management tools and techniques
14/05/2024
Full time
Project Leader months + +On site in Broughton - Chester +Inside IR35 Skills: +Project Management tools +Understanding of Wing Operational processes Accountabilities include: Provide Industrial assessments (MOD) at all project milestone gates ensuring that all Broughton Plant requirements are included. Define & monitor an industrial top level project plan for each modification and/or new development project Ensure the alignment of all plans with central programme requirements and individual functional stakeholders Contribute to resource planning workload and funding requirements Ensure all plans are produced and managed to a level of detail to ensure the accurate delivery of time, cost, quality and safety requirements Ensure regular engagement and communication with programme work package managers/MFT leaders to enable the management and appropriate escalation of project risks and opportunities. Apply a risk & opportunity review process including the maintenance of a local risk & opportunities register and reporting chart. Exploit opportunities to introduce improvements to the product industrial system and identify potential design improvements, without introducing risk to the programme. Chair the weekly governance process inclusive of project leaders and key stakeholders. Lead and develop a team of Local Representatives Develop and deploy, with Operational support, communication and awareness training into the Operations team (including line-side support functions) and engagement of the operational stakeholders Provide Local Representative support and leadership of issue resolution during development builds and regular progress reports. Support the OSWX team governance process inclusive of improving the ways of working through Project Management principles Deputise for Single Aisle HO Industrialization Main Activities Drive a "Safety First" culture in the team Chairing Project reviews Manage Project plans Project Industrial Assessments Chair Risk & Opportunity reviews Project governance review participant Project milestone review contributor. Design review participant. Coordinate & manage industrial trials Support Flight Test A/C refurbishment programmes Managing Local Representative (BC) resource Monitoring Balance Scorecard performance Deputising for Head Of Industrialisation. Outputs Successful industrialization of all new developments, modifications and flight test A/Crefurbishment via:- Project review action tracker Project Plan Risk & opportunities register. Project issue tracker. Stakeholder Engagement and Management Operational Communication packs. Project closure documentation. Lessons learned and continuous improvement Blue collar development plan. Skillset and Experience: Essential: Understanding of Wing Operational processes Good communication and negotiating skills. Experience and successful demonstration of managing similar MFT projects. Application of project management tools and techniques
Our customers are at the forefront of everything that we do. It is our aim to raise the consistent standard of quality, efficiency and professionalism within the recycling industry. To deliver this, we focus on developing products and services that save time and money. Our recycling balers, conveyors, fire suppression systems and waste extraction systems are all designed to more than this to meet customers recycling requirements. As a popular choice in the industry we are now recruiting for a Field Service Engineer. In this role you will be responsible for the routine maintenance and repairs of customer equipment. In addition to this you will be expected to maintain business relationships with customers as well as performing necessary administrative tasks and other duties within the scope of your job role. Responsible to: Head Engineer Main Duties and Responsibilities Servicing & Maintenance: Basic troubleshooting, diagnostics and fault finding Service, maintain, refurbish and repair of customer s equipment Commissioning and Installation of customer equipment Use of hand/power tools ratchets, spanner, hammers, etc. Maintenance and repair of company equipment and tools Manufacture, assembly and refurbishment of machinery/parts in the workshop or at customers premises Responding to call outs/breakdowns in a prompt manner at short notice Adhering to Health & Safety at all times Customer Service: Always provide a professional and courteous service to all customers and suppliers Build and maintain excellent relationships with new and existing customers, identifying their requirements where possible Reporting to customer any defects or issues with equipment that could cause harm to their staff or members of the public Provide help and advice to customers regarding the maintenance and repair of equipment Removal of all scrap/waste from customers site and ensuring area is safe and clean before leaving Company Vehicle: Check fluid levels of company service vehicles on a weekly basis and replenish as necessary Maintain cleanliness of the interior/exterior of company service vehicle Stock-take of service vehicles when requested Reporting any issues or damage with company vehicle to your line manager Administrative Tasks: Completion of service reports immediately after every job and ensure documentation is forwarded on to the relevant personnel Completion of timesheets, expense forms and request forms as required Mentoring: Assist and mentor new engineers/apprentices and give honest feedback on their performance to your line manager when requested Person Specification: Previous experience working in mechanical or electrical engineering Ideally experienced as a field service engineer Excellent customer service with strong communication skills Ability to work on own initiative Comfortable mentoring an apprentice/junior engineer Comfortable with travelling and overnight stays (where required) Qualifications & Certification Diploma, City & Guilds or similar qualification in Mechanical/Electrical engineering or similar discipline Full Clean Driving License In the absence of formal qualifications, relevant previous experience will be considered Benefits: Accommodation paid (for overnight stays) with meals provided Fuel Card and Hotel Card Use of company vehicle (work use only) Company pension contributions Extra holiday entitlement following 2 years of service Work uniform Schedule : Day shift Monday to Friday Weekend available with on call rota Job Types : Full-time, Permanent Additional Information: Hours: Monday to Friday (Full time) + Overtime Location: Bridgwater Remuneration: £35,000 to £40,000 (Basic on 48 hours Monday to Friday) Probation period: 6 months Overtime rate paid on additional hours & Saturday, Sunday and Bank Holidays Candidates can easily achieve £40,000 + per annum with overtime/callouts
10/05/2024
Full time
Our customers are at the forefront of everything that we do. It is our aim to raise the consistent standard of quality, efficiency and professionalism within the recycling industry. To deliver this, we focus on developing products and services that save time and money. Our recycling balers, conveyors, fire suppression systems and waste extraction systems are all designed to more than this to meet customers recycling requirements. As a popular choice in the industry we are now recruiting for a Field Service Engineer. In this role you will be responsible for the routine maintenance and repairs of customer equipment. In addition to this you will be expected to maintain business relationships with customers as well as performing necessary administrative tasks and other duties within the scope of your job role. Responsible to: Head Engineer Main Duties and Responsibilities Servicing & Maintenance: Basic troubleshooting, diagnostics and fault finding Service, maintain, refurbish and repair of customer s equipment Commissioning and Installation of customer equipment Use of hand/power tools ratchets, spanner, hammers, etc. Maintenance and repair of company equipment and tools Manufacture, assembly and refurbishment of machinery/parts in the workshop or at customers premises Responding to call outs/breakdowns in a prompt manner at short notice Adhering to Health & Safety at all times Customer Service: Always provide a professional and courteous service to all customers and suppliers Build and maintain excellent relationships with new and existing customers, identifying their requirements where possible Reporting to customer any defects or issues with equipment that could cause harm to their staff or members of the public Provide help and advice to customers regarding the maintenance and repair of equipment Removal of all scrap/waste from customers site and ensuring area is safe and clean before leaving Company Vehicle: Check fluid levels of company service vehicles on a weekly basis and replenish as necessary Maintain cleanliness of the interior/exterior of company service vehicle Stock-take of service vehicles when requested Reporting any issues or damage with company vehicle to your line manager Administrative Tasks: Completion of service reports immediately after every job and ensure documentation is forwarded on to the relevant personnel Completion of timesheets, expense forms and request forms as required Mentoring: Assist and mentor new engineers/apprentices and give honest feedback on their performance to your line manager when requested Person Specification: Previous experience working in mechanical or electrical engineering Ideally experienced as a field service engineer Excellent customer service with strong communication skills Ability to work on own initiative Comfortable mentoring an apprentice/junior engineer Comfortable with travelling and overnight stays (where required) Qualifications & Certification Diploma, City & Guilds or similar qualification in Mechanical/Electrical engineering or similar discipline Full Clean Driving License In the absence of formal qualifications, relevant previous experience will be considered Benefits: Accommodation paid (for overnight stays) with meals provided Fuel Card and Hotel Card Use of company vehicle (work use only) Company pension contributions Extra holiday entitlement following 2 years of service Work uniform Schedule : Day shift Monday to Friday Weekend available with on call rota Job Types : Full-time, Permanent Additional Information: Hours: Monday to Friday (Full time) + Overtime Location: Bridgwater Remuneration: £35,000 to £40,000 (Basic on 48 hours Monday to Friday) Probation period: 6 months Overtime rate paid on additional hours & Saturday, Sunday and Bank Holidays Candidates can easily achieve £40,000 + per annum with overtime/callouts