Senior Hardware Design Engineer - Exciting Opportunity with Leading Tech Company Lynx is working with a renowned tech company to recruit a Senior Hardware Design Engineer. In this role you'll play a pivotal role in new product introduction as well as sustaining engineering for ground-breaking products. This is a hybrid role and also offers a bonus of 3-6%. Key Responsibilities: Design electronic circuits, subsystems, and systems covering analog, digital, and RF Schematic capture, layout, and library management Evaluate new systems and technologies for feasibility and product design Technical support for production, manufacturing, and troubleshooting Design verification, testing, and documentation Requirements: 4+ years of relevant hardware design experience Strong expertise in digital circuit design (microprocessors, FPGAs, high-speed peripherals) Solid skills in analog circuit design (power supplies, etc.) Familiarity with PCB layout, EMC/CE marking, and design for IPC Hands-on experience in PCB testing Desired: Proficiency with industry-standard design tools - Altium preferred Understanding of military/airborne design standards (MIL-STD, DO-160, etc.) Practical testing skills with scopes, analysers, JTAG boundary scan, etc. Hit apply to find out more information.
16/05/2024
Full time
Senior Hardware Design Engineer - Exciting Opportunity with Leading Tech Company Lynx is working with a renowned tech company to recruit a Senior Hardware Design Engineer. In this role you'll play a pivotal role in new product introduction as well as sustaining engineering for ground-breaking products. This is a hybrid role and also offers a bonus of 3-6%. Key Responsibilities: Design electronic circuits, subsystems, and systems covering analog, digital, and RF Schematic capture, layout, and library management Evaluate new systems and technologies for feasibility and product design Technical support for production, manufacturing, and troubleshooting Design verification, testing, and documentation Requirements: 4+ years of relevant hardware design experience Strong expertise in digital circuit design (microprocessors, FPGAs, high-speed peripherals) Solid skills in analog circuit design (power supplies, etc.) Familiarity with PCB layout, EMC/CE marking, and design for IPC Hands-on experience in PCB testing Desired: Proficiency with industry-standard design tools - Altium preferred Understanding of military/airborne design standards (MIL-STD, DO-160, etc.) Practical testing skills with scopes, analysers, JTAG boundary scan, etc. Hit apply to find out more information.
Technical Engineer - CTTV - Nottingham Onsite 5 days per week Salary - £28,000 - 34,000 Technical Engineer required for a leading client based in Nottingham. We're seeking an Engineer to join our technical support and development team. This multifaceted role includes testing and developing new CCTV, networking, and VMS software products, as well as overseeing helpdesk tickets, offering direct support to customers and internal teams, and crafting technical training materials. The ideal candidate will come from a technical background, ideally within the CCTV, Telematics, or IT sectors, and demonstrate exceptional analytical, problem-solving, and communication abilities. Key skills, Previous Technical Engineering experience Perform practical testing on CCTV, 4G Routers, and VMS software to detect and rectify issues, while also researching market trends and exploring emerging technologies/products. Assess, develop, and maintain Field Service guides to boost initial resolution rates and increase engineer proficiency Previous involvement in a technical capacity, preferably within the electronics or technology sector. While familiarity with CCTV or networking is advantageous, it's not mandatory. Proficiency and experience in the maintenance and installation of Routers, DVRs, CCTV equipment, or related technologies. Demonstrated aptitude for engaging in technical discussions, adept at challenging and probing to achieve optimal results. Exceptional communication skills, encompassing both written and verbal proficiency. Competency in Microsoft Office applications and the capacity to swiftly adapt to new software platforms. Self-driven with the capability to work autonomously, efficiently managing individual workload. Interested? Please submit your updated CV to Dean Parkes at Crimson for immediate consideration. Not interested? Do you know someone who might be a perfect fit for this role? Refer a friend and earn £250 worth of vouchers! Crimson is acting as an employment agency regarding this vacancy
16/05/2024
Full time
Technical Engineer - CTTV - Nottingham Onsite 5 days per week Salary - £28,000 - 34,000 Technical Engineer required for a leading client based in Nottingham. We're seeking an Engineer to join our technical support and development team. This multifaceted role includes testing and developing new CCTV, networking, and VMS software products, as well as overseeing helpdesk tickets, offering direct support to customers and internal teams, and crafting technical training materials. The ideal candidate will come from a technical background, ideally within the CCTV, Telematics, or IT sectors, and demonstrate exceptional analytical, problem-solving, and communication abilities. Key skills, Previous Technical Engineering experience Perform practical testing on CCTV, 4G Routers, and VMS software to detect and rectify issues, while also researching market trends and exploring emerging technologies/products. Assess, develop, and maintain Field Service guides to boost initial resolution rates and increase engineer proficiency Previous involvement in a technical capacity, preferably within the electronics or technology sector. While familiarity with CCTV or networking is advantageous, it's not mandatory. Proficiency and experience in the maintenance and installation of Routers, DVRs, CCTV equipment, or related technologies. Demonstrated aptitude for engaging in technical discussions, adept at challenging and probing to achieve optimal results. Exceptional communication skills, encompassing both written and verbal proficiency. Competency in Microsoft Office applications and the capacity to swiftly adapt to new software platforms. Self-driven with the capability to work autonomously, efficiently managing individual workload. Interested? Please submit your updated CV to Dean Parkes at Crimson for immediate consideration. Not interested? Do you know someone who might be a perfect fit for this role? Refer a friend and earn £250 worth of vouchers! Crimson is acting as an employment agency regarding this vacancy
We are IT Recruitment Specialists partnered with a prestigious Global Consultancy who required a Software Integration Manager (Automotive) - Gaydon location, 5 days working onsite, the balance of time will be remote for one of their public sector Clients based in the UK. IR35: This role is inside of IR35 Initial duration: 6 months Role and tasks Job Description: Our team develops software for safety related and critical applications in the Aerospace, Defence, Rail, Automotive and Energy sectors, often related to critical national infrastructure. Our industry award-winning projects make step changes in operational efficiency and safety in their domain and are highly respected by our customers. You will join a diverse team of excellent and experienced engineers who are committed to ensuring our projects meet our customers' high expectations. The Role As a Software Integration Manager, you will be responsible for the complete technical leadership of a given project as well as main point of contact for all technical issues and responsible for coordination and prioritization of issue resolution. You will also have accountability for technical concerns and ability to pass key gateway criteria. Responsibilities Lead Electrical Architecture, Module owner & Test Teams to implement new/existing features. Lead issue investigation and resolution of all technical issues Responsible for EE Integration status reporting in engineering technical reviews and escalation forums. Responsible for the co-ordinated investigation of complex feature implementation/debugging leading the work streams and ensuring timely closure of issue/implementation to achieve programme timing Prototype build, production line and fleet first line support and investigation. Manage delivery of change requests ensuring traceability of requirement and agreement with all key stakeholders (FuSA, Cyber Security, OBD etc) Your Profile Experience of working in a technical automotive electrical and software application role. Experience of complex hybrid vehicles is a benefit. Experience of automotive architectures and communication protocols like CAN, LIN, Flexray, Ethernet. In-depth knowledge of product development cycle from concept to launch (V Cycle) with a focus on software deployment and integration. Expert knowledge of automotive diagnostics standards (UDS, ISO 14229, DOIP) and diagnostic tools. Complex issue resolution leadership and experience across various functional commodities. Proven capability of vehicle analysis using Vector tools (CANalyzer, CANoe, CANape or equivalent). Hands on experience of diagnostic commissioning and manufacturing processes. Advanced experience in reading circuit diagrams across complex hybrid systems. Ability to interpret requirements documentation. Broad prototype build, production line and fleet support experience. Understanding of Functional Safety and Cyber Security. Strong written and verbal communication, including appropriate escalation and reporting where required. Knowledge of Scripting languages (such as CAPL, VBA, Python). Understanding of ODX (ISO 22901). Development of a wide range of test properties such as rigs and lab cars, including HV. Knowledge of automotive development systems eg releasing, concerns, containments, gateways and sign off documentation. In-depth expertise in more than one of the following commodities is preferred eg powertrain (including hybrid), chassis, infotainment, connectivity, audio, cluster & displays, tracker & e-call, antennas, switchgear, lighting, camera & PDCs, body electronics, power management, EDS. If you are interested in this position and would like to learn more, please send through your CV and we will get in touch with you as soon as possible. Please note, candidates are often Shortlisted within 48 hours.
16/05/2024
Project-based
We are IT Recruitment Specialists partnered with a prestigious Global Consultancy who required a Software Integration Manager (Automotive) - Gaydon location, 5 days working onsite, the balance of time will be remote for one of their public sector Clients based in the UK. IR35: This role is inside of IR35 Initial duration: 6 months Role and tasks Job Description: Our team develops software for safety related and critical applications in the Aerospace, Defence, Rail, Automotive and Energy sectors, often related to critical national infrastructure. Our industry award-winning projects make step changes in operational efficiency and safety in their domain and are highly respected by our customers. You will join a diverse team of excellent and experienced engineers who are committed to ensuring our projects meet our customers' high expectations. The Role As a Software Integration Manager, you will be responsible for the complete technical leadership of a given project as well as main point of contact for all technical issues and responsible for coordination and prioritization of issue resolution. You will also have accountability for technical concerns and ability to pass key gateway criteria. Responsibilities Lead Electrical Architecture, Module owner & Test Teams to implement new/existing features. Lead issue investigation and resolution of all technical issues Responsible for EE Integration status reporting in engineering technical reviews and escalation forums. Responsible for the co-ordinated investigation of complex feature implementation/debugging leading the work streams and ensuring timely closure of issue/implementation to achieve programme timing Prototype build, production line and fleet first line support and investigation. Manage delivery of change requests ensuring traceability of requirement and agreement with all key stakeholders (FuSA, Cyber Security, OBD etc) Your Profile Experience of working in a technical automotive electrical and software application role. Experience of complex hybrid vehicles is a benefit. Experience of automotive architectures and communication protocols like CAN, LIN, Flexray, Ethernet. In-depth knowledge of product development cycle from concept to launch (V Cycle) with a focus on software deployment and integration. Expert knowledge of automotive diagnostics standards (UDS, ISO 14229, DOIP) and diagnostic tools. Complex issue resolution leadership and experience across various functional commodities. Proven capability of vehicle analysis using Vector tools (CANalyzer, CANoe, CANape or equivalent). Hands on experience of diagnostic commissioning and manufacturing processes. Advanced experience in reading circuit diagrams across complex hybrid systems. Ability to interpret requirements documentation. Broad prototype build, production line and fleet support experience. Understanding of Functional Safety and Cyber Security. Strong written and verbal communication, including appropriate escalation and reporting where required. Knowledge of Scripting languages (such as CAPL, VBA, Python). Understanding of ODX (ISO 22901). Development of a wide range of test properties such as rigs and lab cars, including HV. Knowledge of automotive development systems eg releasing, concerns, containments, gateways and sign off documentation. In-depth expertise in more than one of the following commodities is preferred eg powertrain (including hybrid), chassis, infotainment, connectivity, audio, cluster & displays, tracker & e-call, antennas, switchgear, lighting, camera & PDCs, body electronics, power management, EDS. If you are interested in this position and would like to learn more, please send through your CV and we will get in touch with you as soon as possible. Please note, candidates are often Shortlisted within 48 hours.
Project Description and responsibilities: Full document management during various construction phases; permitting, engineering, commissioning, maintenance and commercial operation of the plant. Document Controller to provide general records management and document control services to ensure Umicore's information assets are managed in accordance with well-defined policies, procedures, processes and practices in order that records may be retrievable in the future to support departments requirements Primary Tasks and responsibilities: . Produce and modify procedures to facilitate the transfer of various documents into and out of the companies document management system. . Conduct quality verification on formal documents to ensure conformity with Information Management standard. . Modify and update documents and drawings when necessary and as per technical specifications and contract deliverables. . Maintain, gather and electronically log and distribute various engineering documents. . Create and maintain established files of drawings and correspondence. . Quality checks on documents being received and distribution for engineering modifications. . Review the quality of documents and drawings including metadata, template, eligibility, etc. . Build and maintain document templates, contact lists, distribution lists, presentation templates and tracking logs. . Work closely with contractors to track and update colleagues of information requiring approval and track status updates Technical Profile requirements: . Diploma or degree in business administration, records/information management or a related discipline. . Experience with data entry, compiling of files and distribution of project documentation is an asset. . 4-5 years' experience in a document control role, preferably in a construction or engineering setting. . Experience working in various document management systems. . Strong proficiency in various Microsoft Office applications. . Strong organizational skills and the ability to work well in a rapidly changing environment. . Fluent both in English and Spanish Non-Technical Profile Requirements : . Strong and effective communicator . Ability and willingness to work independently and in a team setting . Adaptabilit . Decisiveness . Organization skills . Critical thinking Location: . North of Spain, exact location remains confidential till at least early July . Until EOY 2024 remote work, afterwards consultants are expected to work onsite Business Travel: . Travel will be required and outside Spain reimbursed via expenses Contract: . Long term contract . Confirmation of the mission will take place before 1/7 . Official confirmation and contract creation scheduled for early July Start: . Objective +- 1st of August . Consultants can perform notice if 4-6 weeks, longer is to discuss with the manager . Consultants cannot take long holidays in July/August after start due to the high workload Languages: . Fluent In Spanish & English Rate: . Market-level Rates for Spain . All-in Rate for Remote and local presence at SPAIN . No expenses accepted Reason for Hire Specific Skills Required for Project Safety Equipment Not applicable (keep in mind that for Olen and Hoboken sites a neon vest is mandatory) Additional Safety Equipment to be provided by Supplier n.a. Travel Required? Yes Travel percentage 10%
16/05/2024
Project-based
Project Description and responsibilities: Full document management during various construction phases; permitting, engineering, commissioning, maintenance and commercial operation of the plant. Document Controller to provide general records management and document control services to ensure Umicore's information assets are managed in accordance with well-defined policies, procedures, processes and practices in order that records may be retrievable in the future to support departments requirements Primary Tasks and responsibilities: . Produce and modify procedures to facilitate the transfer of various documents into and out of the companies document management system. . Conduct quality verification on formal documents to ensure conformity with Information Management standard. . Modify and update documents and drawings when necessary and as per technical specifications and contract deliverables. . Maintain, gather and electronically log and distribute various engineering documents. . Create and maintain established files of drawings and correspondence. . Quality checks on documents being received and distribution for engineering modifications. . Review the quality of documents and drawings including metadata, template, eligibility, etc. . Build and maintain document templates, contact lists, distribution lists, presentation templates and tracking logs. . Work closely with contractors to track and update colleagues of information requiring approval and track status updates Technical Profile requirements: . Diploma or degree in business administration, records/information management or a related discipline. . Experience with data entry, compiling of files and distribution of project documentation is an asset. . 4-5 years' experience in a document control role, preferably in a construction or engineering setting. . Experience working in various document management systems. . Strong proficiency in various Microsoft Office applications. . Strong organizational skills and the ability to work well in a rapidly changing environment. . Fluent both in English and Spanish Non-Technical Profile Requirements : . Strong and effective communicator . Ability and willingness to work independently and in a team setting . Adaptabilit . Decisiveness . Organization skills . Critical thinking Location: . North of Spain, exact location remains confidential till at least early July . Until EOY 2024 remote work, afterwards consultants are expected to work onsite Business Travel: . Travel will be required and outside Spain reimbursed via expenses Contract: . Long term contract . Confirmation of the mission will take place before 1/7 . Official confirmation and contract creation scheduled for early July Start: . Objective +- 1st of August . Consultants can perform notice if 4-6 weeks, longer is to discuss with the manager . Consultants cannot take long holidays in July/August after start due to the high workload Languages: . Fluent In Spanish & English Rate: . Market-level Rates for Spain . All-in Rate for Remote and local presence at SPAIN . No expenses accepted Reason for Hire Specific Skills Required for Project Safety Equipment Not applicable (keep in mind that for Olen and Hoboken sites a neon vest is mandatory) Additional Safety Equipment to be provided by Supplier n.a. Travel Required? Yes Travel percentage 10%
Hardware Deign Engineer - Nottinghamshire Our client based in Nottinghamshire is looking to hire an experienced Hardware Design Engineer to join their team. In this newly created role (due to expansion) you will be joining an established team where the delivery of high quality, high performing solutions achieved in a right first-time environment is valued & rewarded. This role will see you: Design, implement, and optimise hardware design solutions. Monitor and revise delivery to achieve agreed KPIs. Ensure all designs meet relevant safety and industry standards. Deliver cost efficient, obsolescence tolerant designs. Participate in hardware/software co-design and system-level debugging. Support FAT, SAT & Commissioning activity. Leading smaller projects, collaborating on larger ones. Follow industry best practice and company quality standards whilst looking for opportunities for improvement The relevant skills for the role include: Electronics Engineering or related degree, or NVQ Level 5. Practical and relevant experience in a Hardware Electronics Design role. Required Experience Analogue audio. Micro controller/processor (STM32, Arm9, PIC). Reverse engineering analysis techniques. Desirable Experience Transformer design. Power supply design. FPGA/CPLD. CCTV/Networking. DFMEA. Railway environment & standards In return for your skills my client is offering a salary up to £60k, a 37h/Wk, with lunchtime finish Friday, 25 days holiday and option to buy additional 5 days, Pension, employee contribution +2%, capped at 12%., Bupa health care. This is a office based role so you will need to live in a commutable distance of Nottinghamshire IDEALLY Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
15/05/2024
Full time
Hardware Deign Engineer - Nottinghamshire Our client based in Nottinghamshire is looking to hire an experienced Hardware Design Engineer to join their team. In this newly created role (due to expansion) you will be joining an established team where the delivery of high quality, high performing solutions achieved in a right first-time environment is valued & rewarded. This role will see you: Design, implement, and optimise hardware design solutions. Monitor and revise delivery to achieve agreed KPIs. Ensure all designs meet relevant safety and industry standards. Deliver cost efficient, obsolescence tolerant designs. Participate in hardware/software co-design and system-level debugging. Support FAT, SAT & Commissioning activity. Leading smaller projects, collaborating on larger ones. Follow industry best practice and company quality standards whilst looking for opportunities for improvement The relevant skills for the role include: Electronics Engineering or related degree, or NVQ Level 5. Practical and relevant experience in a Hardware Electronics Design role. Required Experience Analogue audio. Micro controller/processor (STM32, Arm9, PIC). Reverse engineering analysis techniques. Desirable Experience Transformer design. Power supply design. FPGA/CPLD. CCTV/Networking. DFMEA. Railway environment & standards In return for your skills my client is offering a salary up to £60k, a 37h/Wk, with lunchtime finish Friday, 25 days holiday and option to buy additional 5 days, Pension, employee contribution +2%, capped at 12%., Bupa health care. This is a office based role so you will need to live in a commutable distance of Nottinghamshire IDEALLY Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
Senior Electronics Engineer wanted for an exciting new client of mine based in Cambridgeshire. Job Responsibilities Day to day, your responsibilities will include: Designing, implementing, and testing printed circuit boards to support the project, focusing on drive electronics for nano-precision actuators, image capture systems, and miniaturised computers to implement closed-loop control systems. Taking functional specifications and turning them into detailed designs. Simulating and producing detailed analogue, digital and mixed-signal circuit designs Developing schematics, designing PCB layouts and generating and managing BOMs for multi-PCBA product designs in Altium Designer Producing and implementing test plans to evaluate designs and verify product functionality against requirements. Debugging, testing and evaluating designs in the lab and supporting integration of electronics into the product alongside other team members Working and communicating with vendors Job Requirements 5+ years of industry experience working in multidisciplinary teams. A fundamental understanding of PCB layout techniques and standards, including experience in PCB prototyping and soldering. Solid experience creating and executing test and measurement benchtop experiments. Test and measurement experience with DMMs, oscilloscopes, logic analysers, and other lab equipment. Understanding of design for manufacture, test, cost and reliability Trustworthy colleague to meet agreed project timelines and goals.
15/05/2024
Full time
Senior Electronics Engineer wanted for an exciting new client of mine based in Cambridgeshire. Job Responsibilities Day to day, your responsibilities will include: Designing, implementing, and testing printed circuit boards to support the project, focusing on drive electronics for nano-precision actuators, image capture systems, and miniaturised computers to implement closed-loop control systems. Taking functional specifications and turning them into detailed designs. Simulating and producing detailed analogue, digital and mixed-signal circuit designs Developing schematics, designing PCB layouts and generating and managing BOMs for multi-PCBA product designs in Altium Designer Producing and implementing test plans to evaluate designs and verify product functionality against requirements. Debugging, testing and evaluating designs in the lab and supporting integration of electronics into the product alongside other team members Working and communicating with vendors Job Requirements 5+ years of industry experience working in multidisciplinary teams. A fundamental understanding of PCB layout techniques and standards, including experience in PCB prototyping and soldering. Solid experience creating and executing test and measurement benchtop experiments. Test and measurement experience with DMMs, oscilloscopes, logic analysers, and other lab equipment. Understanding of design for manufacture, test, cost and reliability Trustworthy colleague to meet agreed project timelines and goals.
My client is looking to hire a C#/ASP.NET software engineer! Essential Skills: 2-5 years of relevant experience Strong C#/.NET/ASP skills Experience with JavaScript Good understanding of the software development life cycle and team development using git Strong analytical and problem-solving skills Excellent communication and interpersonal skills Ability to work independently and in a team Bachelor's degree in relevant field UK residency for the past 5 years due to security clearance requirements Desirable Skills: Experience with Android applications using the Ionic framework Exposure to SQL database development Exposure to sensor data acquisition Understanding of computer networking Understanding of web application security Experience with virtual machine environments Responsibilities: Design, develop, and maintain software solutions Analyze application specifications and document user requirements Write high-quality code, debug, and handle external dependencies Participate in implementation plans, including schedules and priorities Perform unit and technical testing of web applications Document tools and practices and actively participate in knowledge sharing Contribute to coding standards, best practices, and procedures Provide post-production support as needed Travel opportunities both within the UK and internationally Work closely with the software development and electronics systems teams
15/05/2024
Full time
My client is looking to hire a C#/ASP.NET software engineer! Essential Skills: 2-5 years of relevant experience Strong C#/.NET/ASP skills Experience with JavaScript Good understanding of the software development life cycle and team development using git Strong analytical and problem-solving skills Excellent communication and interpersonal skills Ability to work independently and in a team Bachelor's degree in relevant field UK residency for the past 5 years due to security clearance requirements Desirable Skills: Experience with Android applications using the Ionic framework Exposure to SQL database development Exposure to sensor data acquisition Understanding of computer networking Understanding of web application security Experience with virtual machine environments Responsibilities: Design, develop, and maintain software solutions Analyze application specifications and document user requirements Write high-quality code, debug, and handle external dependencies Participate in implementation plans, including schedules and priorities Perform unit and technical testing of web applications Document tools and practices and actively participate in knowledge sharing Contribute to coding standards, best practices, and procedures Provide post-production support as needed Travel opportunities both within the UK and internationally Work closely with the software development and electronics systems teams
Overview Reporting to the Process Engineering Manager, the Production Support Engineer is responsible for ensuring optimal OEE (Overall Equipment Effectiveness), through effective preventative maintenance and corrective actions to reduce equipment down time, in line with the expectations of Operations. Additionally, providing engineering support to Operations and ensuring continuous improvement. The successful candidate will join the Process Engineering team, reporting to the Process Engineering Manager. This team is comprised of 4 employees. Experience: Electronics: Candidate will have detailed knowledge of repair fault finding and minor design. Manufacturing: The candidate has previously worked in a high-precision electronics manufacturing environment supporting and repairing equipment and systems. IT skills: Computer literate; with experience of using Microsoft windows software to complete work done reports and monitor equipment usage (i.e. word, excel etc.) Continuous improvement and Problem- Solving: Candidates will be familiar with making improvements to equipment / systems and services to improve utilisation and operational/production productivity and throughput. You will be familiar of the creation and implementation of lean working processes and able to demonstrate a structured approach to problem-solving, root-cause analysis. Ability to construct an FMEA would be highly desirable Documentation: The candidate has the ability to interpret drawings, specifications, work instructions and create new ones if required. Maintenance of Equipment: You will be able to demonstrate their ability to support and repair equipment and systems. Mechanical Exposure: Have worked in an environment with some mechanical requirement (assembling items etc). ERP Systems: Exposure to ERP systems. Manufacturing: Experience in electronic instrumentation. Overall Equipment Effectiveness (OEE): Able to track and monitor equipment utilisation and reliability to identify preventative maintenance measures to improve reliability and up-time. Understand measuring equipment operation and ensuring optimal overall equipment effectiveness. H&S: Knowledge of Health and Safety at work. Education: HNC or above in electronics, we will consider candidates who are qualified by experience. Normal hours of work will be 08:00 - 16:15 Monday to Thursday, 08:00 - 15;00 on Friday with half an hour for lunch. This role is not hybrid Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
15/05/2024
Full time
Overview Reporting to the Process Engineering Manager, the Production Support Engineer is responsible for ensuring optimal OEE (Overall Equipment Effectiveness), through effective preventative maintenance and corrective actions to reduce equipment down time, in line with the expectations of Operations. Additionally, providing engineering support to Operations and ensuring continuous improvement. The successful candidate will join the Process Engineering team, reporting to the Process Engineering Manager. This team is comprised of 4 employees. Experience: Electronics: Candidate will have detailed knowledge of repair fault finding and minor design. Manufacturing: The candidate has previously worked in a high-precision electronics manufacturing environment supporting and repairing equipment and systems. IT skills: Computer literate; with experience of using Microsoft windows software to complete work done reports and monitor equipment usage (i.e. word, excel etc.) Continuous improvement and Problem- Solving: Candidates will be familiar with making improvements to equipment / systems and services to improve utilisation and operational/production productivity and throughput. You will be familiar of the creation and implementation of lean working processes and able to demonstrate a structured approach to problem-solving, root-cause analysis. Ability to construct an FMEA would be highly desirable Documentation: The candidate has the ability to interpret drawings, specifications, work instructions and create new ones if required. Maintenance of Equipment: You will be able to demonstrate their ability to support and repair equipment and systems. Mechanical Exposure: Have worked in an environment with some mechanical requirement (assembling items etc). ERP Systems: Exposure to ERP systems. Manufacturing: Experience in electronic instrumentation. Overall Equipment Effectiveness (OEE): Able to track and monitor equipment utilisation and reliability to identify preventative maintenance measures to improve reliability and up-time. Understand measuring equipment operation and ensuring optimal overall equipment effectiveness. H&S: Knowledge of Health and Safety at work. Education: HNC or above in electronics, we will consider candidates who are qualified by experience. Normal hours of work will be 08:00 - 16:15 Monday to Thursday, 08:00 - 15;00 on Friday with half an hour for lunch. This role is not hybrid Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
SC Cleared Assembly Technician £400 pd Inside IR35 Guildford (on site) * REQUIRES ACTIVE SC CLEARANCE* Overview: Here at Anson McCade we are working with the largest UK defence consultancy to recruit for an assembly technician to join on a contract basis. You will be involved with all aspects of the assembly and test of complex digital and analogue electronic products, working closely with a team of Manufacturing Engineers and Hardware Developers. You will work across all stages of the product life cycle including prototypes, productionisation, production and support, This role is 5 days a week on site. The skill set we are looking for: Any RF or DeBug experience Electronics background Experience with PCB's good Some soldering skills useful - IPC Qualification practical engineering experience working in a live electronics production environment Understanding of electronic principles, circuit diagrams, assembly drawings, BoMs and test specifications. Contract Details: Guildford 5 days on site £400 pd Inside IR35 3 month initial contract with view to extend. REQUIRES ACTIVE SC CLEARANCE
15/05/2024
Project-based
SC Cleared Assembly Technician £400 pd Inside IR35 Guildford (on site) * REQUIRES ACTIVE SC CLEARANCE* Overview: Here at Anson McCade we are working with the largest UK defence consultancy to recruit for an assembly technician to join on a contract basis. You will be involved with all aspects of the assembly and test of complex digital and analogue electronic products, working closely with a team of Manufacturing Engineers and Hardware Developers. You will work across all stages of the product life cycle including prototypes, productionisation, production and support, This role is 5 days a week on site. The skill set we are looking for: Any RF or DeBug experience Electronics background Experience with PCB's good Some soldering skills useful - IPC Qualification practical engineering experience working in a live electronics production environment Understanding of electronic principles, circuit diagrams, assembly drawings, BoMs and test specifications. Contract Details: Guildford 5 days on site £400 pd Inside IR35 3 month initial contract with view to extend. REQUIRES ACTIVE SC CLEARANCE
Spectrum IT Recruitment (South) Ltd
Guildford, Surrey
Graduate Software Engineers! C, C++, Java, Signal Processing, VHDL, Embedded, Electronics, Greenfield R&D. Surrey, South East UK (Must be eligible for SC/DV clearance) Are you a Graduate Software Engineer that craves innovation, greenfield projects, making an impact and having the autonomy to choose your own projects? Would you like to shape your learning and development? If so, please read on. We are seeking talented Graduate/Junior Software Engineers to join a fast-growing technical consultancy delivering software & hardware solutions to British MoD projects. The company take on complex projects that require deep problem solving. You get to choose from that range of projects and to set your own destiny in terms of learning and development, whilst being mentored and supported in your development by a fantastic team. What do you need? Candidates must have a strong academic background from a Russell Group university (Oxford, Imperial, Durham, Southampton), typically with a first-class degree or PhD in a numerate subject such as physics, engineering or maths. Along with top grade A-Level results in similar STEM categories. You will need a highly analytical mindset, strong technical skills, a natural flair for solving complex problems and knowledge of hardware, software, electronics and engineering principles. Although not a pre-requisite, capabilities in any of the following areas are of particular interest: RF system design and implementation Signal processing algorithm design Software development (eg C/C++/Java) VHDL implementation for FPGAs Analogue/digital electronics design and implementation PCB schematic capture and layout How to apply Hit apply to upload your CV or please contact Tom Rayner at Spectrum IT Recruitment for further information. (see below) Applicants must be based in the UK and be eligible for security clearance (SC, DV). Spectrum IT Recruitment (South) Limited is acting as an Employment Agency in relation to this vacancy.
14/05/2024
Full time
Graduate Software Engineers! C, C++, Java, Signal Processing, VHDL, Embedded, Electronics, Greenfield R&D. Surrey, South East UK (Must be eligible for SC/DV clearance) Are you a Graduate Software Engineer that craves innovation, greenfield projects, making an impact and having the autonomy to choose your own projects? Would you like to shape your learning and development? If so, please read on. We are seeking talented Graduate/Junior Software Engineers to join a fast-growing technical consultancy delivering software & hardware solutions to British MoD projects. The company take on complex projects that require deep problem solving. You get to choose from that range of projects and to set your own destiny in terms of learning and development, whilst being mentored and supported in your development by a fantastic team. What do you need? Candidates must have a strong academic background from a Russell Group university (Oxford, Imperial, Durham, Southampton), typically with a first-class degree or PhD in a numerate subject such as physics, engineering or maths. Along with top grade A-Level results in similar STEM categories. You will need a highly analytical mindset, strong technical skills, a natural flair for solving complex problems and knowledge of hardware, software, electronics and engineering principles. Although not a pre-requisite, capabilities in any of the following areas are of particular interest: RF system design and implementation Signal processing algorithm design Software development (eg C/C++/Java) VHDL implementation for FPGAs Analogue/digital electronics design and implementation PCB schematic capture and layout How to apply Hit apply to upload your CV or please contact Tom Rayner at Spectrum IT Recruitment for further information. (see below) Applicants must be based in the UK and be eligible for security clearance (SC, DV). Spectrum IT Recruitment (South) Limited is acting as an Employment Agency in relation to this vacancy.
Seeking Sharp Minds to Innovate the Internet of Things Do you dream of pushing wireless tech to new heights? In this role, you'll bring ground-breaking IoT devices from concept to reality. Lynx is working with a company pioneering smart RF mesh networks to connect the world. They need hardware experts to evolve their sensor and module portfolio. You'll maximise next-gen performance, cost-efficiency and security. If you live on the bleeding edge of wireless hardware design with 5+ years under your belt, let's talk. An inclusive team fuels our culture of innovation - across both our Cambridge UK and India offices. In this varied role you'll: Architect reliable, scalable hardware integrating RF, digital and analog Perform compliance testing and optimise field performance Debug prototypes and drive improvements with internal stakeholders Shape requirements for cloud-based IoT infrastructure Mentor junior engineers to elevate our shared expertise On offer: opportunities to grow, competitive pay, stock options, full benefits and more. Flexible remote work available. Relocation assistance too. If you've pushed wireless hardware to the limits, this global launchpad awaits your talent. Let's connect game-changing networks.
14/05/2024
Full time
Seeking Sharp Minds to Innovate the Internet of Things Do you dream of pushing wireless tech to new heights? In this role, you'll bring ground-breaking IoT devices from concept to reality. Lynx is working with a company pioneering smart RF mesh networks to connect the world. They need hardware experts to evolve their sensor and module portfolio. You'll maximise next-gen performance, cost-efficiency and security. If you live on the bleeding edge of wireless hardware design with 5+ years under your belt, let's talk. An inclusive team fuels our culture of innovation - across both our Cambridge UK and India offices. In this varied role you'll: Architect reliable, scalable hardware integrating RF, digital and analog Perform compliance testing and optimise field performance Debug prototypes and drive improvements with internal stakeholders Shape requirements for cloud-based IoT infrastructure Mentor junior engineers to elevate our shared expertise On offer: opportunities to grow, competitive pay, stock options, full benefits and more. Flexible remote work available. Relocation assistance too. If you've pushed wireless hardware to the limits, this global launchpad awaits your talent. Let's connect game-changing networks.
Exciting Opportunity for Embedded Design Engineer Are you a talented Embedded Design Engineer looking for a challenging and rewarding permanent position? Our client, a leading technology company, is seeking a skilled professional to join their dynamic team and contribute to the design and development of world-beating products. In this role, you will play a crucial part in supporting the UK-based Embedded team through an extremely busy period, juggling both New Product Development and delivering customer-funded projects based around existing product ranges. While the primary focus will be on Datalink products, you may also be asked to support other product lines within the company. Key responsibilities include: Designing firmware/software for processors and microcontrollers using Embedded C Developing solutions using Linux Creating firmware for FPGAs using VHDL/DSP Supporting production and manufacturing teams Troubleshooting firmware, software, and system issues Testing and debugging new and existing designs Creating comprehensive documentation, including requirement specifications, test plans, user information, and API documents The ideal candidate will have a minimum of 3 years of experience in an equivalent role and possess a strong skill set in C/C++, Embedded Linux, and FPGA development. Experience with DVB-T, datalink/radio technologies, video, and broadcast is a plus. A degree in electronics, computer science, or a related subject is desirable. Our client offers a competitive salary, excellent benefits, and a supportive work environment that encourages professional growth and development. If you're a self-motivated, enthusiastic team player with strong interpersonal skills and a desire to make an impact, we'd love to hear from you. Apply now and take the first step towards an exciting new chapter in your career!
14/05/2024
Full time
Exciting Opportunity for Embedded Design Engineer Are you a talented Embedded Design Engineer looking for a challenging and rewarding permanent position? Our client, a leading technology company, is seeking a skilled professional to join their dynamic team and contribute to the design and development of world-beating products. In this role, you will play a crucial part in supporting the UK-based Embedded team through an extremely busy period, juggling both New Product Development and delivering customer-funded projects based around existing product ranges. While the primary focus will be on Datalink products, you may also be asked to support other product lines within the company. Key responsibilities include: Designing firmware/software for processors and microcontrollers using Embedded C Developing solutions using Linux Creating firmware for FPGAs using VHDL/DSP Supporting production and manufacturing teams Troubleshooting firmware, software, and system issues Testing and debugging new and existing designs Creating comprehensive documentation, including requirement specifications, test plans, user information, and API documents The ideal candidate will have a minimum of 3 years of experience in an equivalent role and possess a strong skill set in C/C++, Embedded Linux, and FPGA development. Experience with DVB-T, datalink/radio technologies, video, and broadcast is a plus. A degree in electronics, computer science, or a related subject is desirable. Our client offers a competitive salary, excellent benefits, and a supportive work environment that encourages professional growth and development. If you're a self-motivated, enthusiastic team player with strong interpersonal skills and a desire to make an impact, we'd love to hear from you. Apply now and take the first step towards an exciting new chapter in your career!
Functional Safety Engineer (electronics) - £55 - 70 per hour - inside ir35 - 6 months (extensions likely) - Staffordshire - hybrid working (2 days onsite a week) - Sector: Energy Yolk recruitment a recruiting for a Functional Safety Engineer (electronics) to work with a world class engineering client in the energy and nuclear sector. This is an exciting opportunity to work with a leader in advanced systems integration with some of the largest energy projects the country has to offer. Responsibilities: Design and develop Safety Instrumented Systems (SIS) to meet Safety Integrity Level (SIL) requirements. Conduct risk assessments and hazard analysis to identify safety requirements. Collaborate with cross-functional teams to integrate safety features into Industrial Control Systems (ICS). Implement measures to protect safety-critical electronic systems. Perform verification and validation activities to ensure compliance with industry standards. Provide technical expertise and guidance on functional safety principles and best practices. Core Skills: Must be able to achieve SC security clearance. TUV certification in functional safety Knowledge of related safety and environmental legislation. Proven experience in designing and implementing Safety Instrumented Systems (SIS). Proficiency in relevant industry standards such as IEC 61508 and IEC 61511. Desirable Skills: Hold a current SC security clearance.
14/05/2024
Project-based
Functional Safety Engineer (electronics) - £55 - 70 per hour - inside ir35 - 6 months (extensions likely) - Staffordshire - hybrid working (2 days onsite a week) - Sector: Energy Yolk recruitment a recruiting for a Functional Safety Engineer (electronics) to work with a world class engineering client in the energy and nuclear sector. This is an exciting opportunity to work with a leader in advanced systems integration with some of the largest energy projects the country has to offer. Responsibilities: Design and develop Safety Instrumented Systems (SIS) to meet Safety Integrity Level (SIL) requirements. Conduct risk assessments and hazard analysis to identify safety requirements. Collaborate with cross-functional teams to integrate safety features into Industrial Control Systems (ICS). Implement measures to protect safety-critical electronic systems. Perform verification and validation activities to ensure compliance with industry standards. Provide technical expertise and guidance on functional safety principles and best practices. Core Skills: Must be able to achieve SC security clearance. TUV certification in functional safety Knowledge of related safety and environmental legislation. Proven experience in designing and implementing Safety Instrumented Systems (SIS). Proficiency in relevant industry standards such as IEC 61508 and IEC 61511. Desirable Skills: Hold a current SC security clearance.
Senior Electronics Engineer Lynx is representing a rapidly growing company in Bristol, seeking an innovative Senior Electronics Engineer to join a team developing next-generation detection and sensing systems. You will play a leading role evolving cutting-edge products from concept through production. You Will: Drive analog and mixed-signal circuit design, analysis, prototyping and testing Define and execute technology roadmaps, research, system architecture Lead projects and cross-functional engineering teams Collaborate with software, production and field teams Mentor and develop junior engineers Author documentation, interface with customers We Require: Degree in electronics engineering or equivalent 8+ years hands-on hardware development experience Specialization in analog IC design, instrumentation, test philosophy Leadership: strategising, directing projects, motivating teams Programming: Python, MATLAB preferred Creative problem-solving, fast learner, passion for innovation We Offer: Competitive salary up to £70k Hybrid remote/office work environment Flexible hours, parental leave, sabbatical options Chance to pioneer future of detection technologies Learning/development budget New, modern and accessible facilities Relocation assistance available If you want to create breakthrough engineered products that push boundaries, we would love to hear from you. Apply today!
14/05/2024
Full time
Senior Electronics Engineer Lynx is representing a rapidly growing company in Bristol, seeking an innovative Senior Electronics Engineer to join a team developing next-generation detection and sensing systems. You will play a leading role evolving cutting-edge products from concept through production. You Will: Drive analog and mixed-signal circuit design, analysis, prototyping and testing Define and execute technology roadmaps, research, system architecture Lead projects and cross-functional engineering teams Collaborate with software, production and field teams Mentor and develop junior engineers Author documentation, interface with customers We Require: Degree in electronics engineering or equivalent 8+ years hands-on hardware development experience Specialization in analog IC design, instrumentation, test philosophy Leadership: strategising, directing projects, motivating teams Programming: Python, MATLAB preferred Creative problem-solving, fast learner, passion for innovation We Offer: Competitive salary up to £70k Hybrid remote/office work environment Flexible hours, parental leave, sabbatical options Chance to pioneer future of detection technologies Learning/development budget New, modern and accessible facilities Relocation assistance available If you want to create breakthrough engineered products that push boundaries, we would love to hear from you. Apply today!
Summary: A world-leading test equipment company that helps utility companies install, protect, and maintain infrastructure networks is entering an exciting phase of hardware development. They are seeking a Senior Electronics Engineer to help shape the direction of the next generation of underground location products. This role sits within the New Product Development (NPD) team, responsible for executing the technology and product roadmaps. You will lead technical research to increase maturity and decrease risk in upcoming projects. As landscapes continuously evolve, you'll ensure roadmaps align and research feeds into robust products. Responsibilities Include: Leading and owning work packages from inception through completion Mentoring junior engineers and leading technical/cross-functional teams Providing technical interface to product management, developing concepts aligned to roadmaps Applying electronics engineering knowledge to plan, lead, and execute design tasks Developing technical solutions requiring ingenuity and creativity Requirements: Engineering degree in Electronic Engineering or similar Skilled all-round electronics designer Strong analog design, test, PSU, EMC/regulatory, simulation, manufacturing test experience Debugging of processor-based hardware Board documentation and software team liaison Extensive product development background Ability to lead and mentor technical teams Benefits Include: Competitive salary Home/office hybrid working opportunities 25 days annual leave plus option to buy 3 more Pension scheme with employer contributions Private medical cover options Cycle to work scheme Free parking Annual bonus This is an opportunity to shape cutting-edge underground utility location products for a world-leading company with an excellent work-life balance. If you have the required electronics engineering skills, apply today!
14/05/2024
Full time
Summary: A world-leading test equipment company that helps utility companies install, protect, and maintain infrastructure networks is entering an exciting phase of hardware development. They are seeking a Senior Electronics Engineer to help shape the direction of the next generation of underground location products. This role sits within the New Product Development (NPD) team, responsible for executing the technology and product roadmaps. You will lead technical research to increase maturity and decrease risk in upcoming projects. As landscapes continuously evolve, you'll ensure roadmaps align and research feeds into robust products. Responsibilities Include: Leading and owning work packages from inception through completion Mentoring junior engineers and leading technical/cross-functional teams Providing technical interface to product management, developing concepts aligned to roadmaps Applying electronics engineering knowledge to plan, lead, and execute design tasks Developing technical solutions requiring ingenuity and creativity Requirements: Engineering degree in Electronic Engineering or similar Skilled all-round electronics designer Strong analog design, test, PSU, EMC/regulatory, simulation, manufacturing test experience Debugging of processor-based hardware Board documentation and software team liaison Extensive product development background Ability to lead and mentor technical teams Benefits Include: Competitive salary Home/office hybrid working opportunities 25 days annual leave plus option to buy 3 more Pension scheme with employer contributions Private medical cover options Cycle to work scheme Free parking Annual bonus This is an opportunity to shape cutting-edge underground utility location products for a world-leading company with an excellent work-life balance. If you have the required electronics engineering skills, apply today!
Senior Analog Electronics Engineer - Unleash Your Creativity and Innovation Are you a passionate and skilled analog electronics engineer looking for an opportunity to make a real impact? Lynx is representing a leading technology company seeking a Senior Analog Electronics Engineer to join the team and drive the development of cutting-edge products. In this pivotal role, you will have the freedom to apply your expertise in analog electronics engineering to plan, lead, and execute design tasks with a high degree of independence. Our client encourages creativity and ingenuity in developing technical solutions to complex problems, and you will have the opportunity to work on a wide range of exciting projects. As a Senior Analog Electronics Engineer, you will: Be recognised as an expert in the field of analog electronics Independently formulate technically innovative ideas and approaches Advise and coach less senior engineers, reviewing work for technical accuracy and adequacy Plan and execute work packages, either individually or as a work package owner Collaborate with cross-functional teams and oversee work with development partners To excel in this role, you should possess: Strong expertise in analog design, including low noise amplifiers, op-amp selection, loop stability, discrete transistor circuits, power amplifiers, and filter design Experience with switch mode power supplies, focusing on low noise/EMI, high efficiency, and low power Proficiency in measurement and testing using oscilloscopes, spectrum analysers, vector network analysers, and thermal cameras Knowledge of EMC, radio, and safety regulations (eg, EN 300220, EN61000, EN55011, EN55022) Extensive experience in product development and schematic capture & circuit simulation Additional advantageous skills include: Processor interfacing (USB, I2C, SPI, RS232/485) Digital Signal Processing and mathematical modelling Understanding of ADC/DAC types, usage, and design Experience with battery-powered devices and chargers PCB layout skills and the ability to lead technical teams Qualifications: BSc, BEng, or HND (or equivalent) in analog electronics engineering or a related field MSc, CEng, MIET (or equivalent) is preferred To apply, please submit your CV highlighting your relevant experience and accomplishments. Our client offers competitive compensation, comprehensive benefits, and opportunities for growth and development. Don't miss this exciting opportunity to make your mark in the world of analog electronics engineering Apply now!
14/05/2024
Full time
Senior Analog Electronics Engineer - Unleash Your Creativity and Innovation Are you a passionate and skilled analog electronics engineer looking for an opportunity to make a real impact? Lynx is representing a leading technology company seeking a Senior Analog Electronics Engineer to join the team and drive the development of cutting-edge products. In this pivotal role, you will have the freedom to apply your expertise in analog electronics engineering to plan, lead, and execute design tasks with a high degree of independence. Our client encourages creativity and ingenuity in developing technical solutions to complex problems, and you will have the opportunity to work on a wide range of exciting projects. As a Senior Analog Electronics Engineer, you will: Be recognised as an expert in the field of analog electronics Independently formulate technically innovative ideas and approaches Advise and coach less senior engineers, reviewing work for technical accuracy and adequacy Plan and execute work packages, either individually or as a work package owner Collaborate with cross-functional teams and oversee work with development partners To excel in this role, you should possess: Strong expertise in analog design, including low noise amplifiers, op-amp selection, loop stability, discrete transistor circuits, power amplifiers, and filter design Experience with switch mode power supplies, focusing on low noise/EMI, high efficiency, and low power Proficiency in measurement and testing using oscilloscopes, spectrum analysers, vector network analysers, and thermal cameras Knowledge of EMC, radio, and safety regulations (eg, EN 300220, EN61000, EN55011, EN55022) Extensive experience in product development and schematic capture & circuit simulation Additional advantageous skills include: Processor interfacing (USB, I2C, SPI, RS232/485) Digital Signal Processing and mathematical modelling Understanding of ADC/DAC types, usage, and design Experience with battery-powered devices and chargers PCB layout skills and the ability to lead technical teams Qualifications: BSc, BEng, or HND (or equivalent) in analog electronics engineering or a related field MSc, CEng, MIET (or equivalent) is preferred To apply, please submit your CV highlighting your relevant experience and accomplishments. Our client offers competitive compensation, comprehensive benefits, and opportunities for growth and development. Don't miss this exciting opportunity to make your mark in the world of analog electronics engineering Apply now!
Electronics Engineer Alton, Hampshire £50k - £70K DOE Role details: We are working with an innovative Space company with world class expertise in Spacecraft. They design, build and operate space missions for global customers. They are looking for an Electronics Engineer to support on a range of activities from detailed design, development, documentation and test through to wider spacecraft support. Responsibilities: Derivation and management of technical requirements from Mission and System Level to subsystem and equipment level Design, development, prototyping, build and test of electronic circuits and systems from initial requirements through to launch and in-orbit operations Detailed design activities including Schematic production; Selection and procurement of relevant components and assemblies to support design and development activities; ECAD design either directly or managing a specialist Produce electronics documentation, eg SoW, Design Document, Interface Control Document, Test Plans Requirements: Educated to at least degree - level or equivalent in a relevant scientific or engineering discipline Technical delivery of complex electrical/electronic systems, ideally on a satellite programme (or in the Aerospace or automotive sector) Proficient in use of appropriate technical tools (eg Altium, OrCAD, PSpice) Experience in documentation for space/aerospace projects (highly desirable) Experience in testing and test automation Benefits: 37.5 hour working week, Flexible working, 30 days holiday 10% Pension, Bonus Life insurance, Private medical, Income protection Eligibility: To be considered for the role, you must have permanent UK residency status.
14/05/2024
Full time
Electronics Engineer Alton, Hampshire £50k - £70K DOE Role details: We are working with an innovative Space company with world class expertise in Spacecraft. They design, build and operate space missions for global customers. They are looking for an Electronics Engineer to support on a range of activities from detailed design, development, documentation and test through to wider spacecraft support. Responsibilities: Derivation and management of technical requirements from Mission and System Level to subsystem and equipment level Design, development, prototyping, build and test of electronic circuits and systems from initial requirements through to launch and in-orbit operations Detailed design activities including Schematic production; Selection and procurement of relevant components and assemblies to support design and development activities; ECAD design either directly or managing a specialist Produce electronics documentation, eg SoW, Design Document, Interface Control Document, Test Plans Requirements: Educated to at least degree - level or equivalent in a relevant scientific or engineering discipline Technical delivery of complex electrical/electronic systems, ideally on a satellite programme (or in the Aerospace or automotive sector) Proficient in use of appropriate technical tools (eg Altium, OrCAD, PSpice) Experience in documentation for space/aerospace projects (highly desirable) Experience in testing and test automation Benefits: 37.5 hour working week, Flexible working, 30 days holiday 10% Pension, Bonus Life insurance, Private medical, Income protection Eligibility: To be considered for the role, you must have permanent UK residency status.
CAD Engineer Initial freelance contract until end of 2024 + option to extend Eindhoven, Netherlands (1 day remote per week possible) Our client: Provides High Performance Mixed Signal and Standard Product solutions that leverage its leading RF, Analog, Power Management, Interface, Security and Digital Processing expertise. These innovations are used in a wide range of automotive, identification, wireless infrastructure, lighting, industrial, mobile, consumer and computing applications. A global semiconductor company with operations in more than 45 countries, over 45,000 employees and a revenue of over $10 billion. Department: Design Enablement is a central technology development organization within our client which defines and supports their hardware design methodologies and EDA tools enabling differentiation for their IP/SOC development. Deployment and support of IC design flow and tools used inside our client. DFT design teams support in order to proactively understand their needs, to implement solutions to address new technical challenges or recurring problems impacting the development of new products. The mission will consist in: . Develop our client's proprietary tools, flows and methodologies to address DFT related challenges . Develop/Design/Implement/Test/Document reliable and maintainable software . Develop specifications in a good interaction with product managers, peer engineers, support engineers . Develop/maintain a broad knowledge of technical developments in software application domain . Support the development and/or execution of test specifications developed by application engineers . Support the maintenance of department products/solutions Job Qualifications: . Bachelor or Master Degree in Computer Science, Electronic, Electrical Engineering or equivalent . Around 2 - 6+ years of working experience in semiconductor industry, preferably diagnostics in CAD/EDA space. . Practical knowledge of object-oriented programming and clean code principles . Solid hands-on experience in developing tools, automation flows using Python, modern C++ (C++ 11 and up), TCL, Linux and bash script along with hands on exposure to SQL or NoSQL databases Preferred competencies: . Has experience with automated tests and unit tests . Acumen in Software development life cycle. Hand-On experience in agile techniques using git and JIRA . Experience with DfT methodologies, design and test automation on diagnostics and a working understanding of fault models with scan test is considered a pro . Has affinity for all aspects of DfT architecture and Design Methodology . Experience to work in a multicultural environment Soft skills: . Persistent in problem solving, never give up mentality in a dynamic environment . Frugal, result oriented, KPI driven and customer obsession . Willingness to improve internal processes and way of working. . Good communication skills . An enthusiastic team worker . Fluent in English language, verbal and written. Command of the Dutch language is a plus, but no prerequisite
14/05/2024
Project-based
CAD Engineer Initial freelance contract until end of 2024 + option to extend Eindhoven, Netherlands (1 day remote per week possible) Our client: Provides High Performance Mixed Signal and Standard Product solutions that leverage its leading RF, Analog, Power Management, Interface, Security and Digital Processing expertise. These innovations are used in a wide range of automotive, identification, wireless infrastructure, lighting, industrial, mobile, consumer and computing applications. A global semiconductor company with operations in more than 45 countries, over 45,000 employees and a revenue of over $10 billion. Department: Design Enablement is a central technology development organization within our client which defines and supports their hardware design methodologies and EDA tools enabling differentiation for their IP/SOC development. Deployment and support of IC design flow and tools used inside our client. DFT design teams support in order to proactively understand their needs, to implement solutions to address new technical challenges or recurring problems impacting the development of new products. The mission will consist in: . Develop our client's proprietary tools, flows and methodologies to address DFT related challenges . Develop/Design/Implement/Test/Document reliable and maintainable software . Develop specifications in a good interaction with product managers, peer engineers, support engineers . Develop/maintain a broad knowledge of technical developments in software application domain . Support the development and/or execution of test specifications developed by application engineers . Support the maintenance of department products/solutions Job Qualifications: . Bachelor or Master Degree in Computer Science, Electronic, Electrical Engineering or equivalent . Around 2 - 6+ years of working experience in semiconductor industry, preferably diagnostics in CAD/EDA space. . Practical knowledge of object-oriented programming and clean code principles . Solid hands-on experience in developing tools, automation flows using Python, modern C++ (C++ 11 and up), TCL, Linux and bash script along with hands on exposure to SQL or NoSQL databases Preferred competencies: . Has experience with automated tests and unit tests . Acumen in Software development life cycle. Hand-On experience in agile techniques using git and JIRA . Experience with DfT methodologies, design and test automation on diagnostics and a working understanding of fault models with scan test is considered a pro . Has affinity for all aspects of DfT architecture and Design Methodology . Experience to work in a multicultural environment Soft skills: . Persistent in problem solving, never give up mentality in a dynamic environment . Frugal, result oriented, KPI driven and customer obsession . Willingness to improve internal processes and way of working. . Good communication skills . An enthusiastic team worker . Fluent in English language, verbal and written. Command of the Dutch language is a plus, but no prerequisite
Safety Engineer (Multi-Disciplinary within defence industry including Aviation, Land, Submarine) Length: 6 months initially Location : Across the UK, once per week travel to local site Salary: £Competitive Candidates must be eligible for SC Clearance or hold active SC Clearance. Role Overview: As a Safety Engineer, you will be responsible for ensuring the safety of various systems across different disciplines. The main duties of the role include conducting safety analysis, producing hazard reports and safety assessment reports, maintaining hazard logs, and supporting the documentation and records management related to safety management systems. Key Responsibilities: Conduct safety analysis on a range of mission support systems across multiple disciplines. Produce hazard analysis reports and safety assessment reports for different systems. Maintain hazard logs and produce related reports. Support the maintenance, control, and configuration management of documentation and records for safety management systems of various mission systems. Qualifications and Experience: A degree in a relevant engineering discipline or a minimum of 3 years' experience in a safety-related role within a relevant sector. Essential Skills: Experience with software- and safety-related standards. Demonstrated experience in functional safety of complex systems. Proficiency in safety engineering tools and techniques, such as developing safety assurance cases, conducting failure analysis, and managing hazard logs. Desirable Skills: Knowledge of relevant regulatory publications. Experience in demonstrating functional safety within different sectors. Familiarity with aviation mission planning systems and electronic flight bag applications/standards. Understanding of aircraft integration requirements and challenges. Experience in stakeholder management within relevant environments. Additional Requirements: The role may require occasional travel within the UK. A Full UK Driver's License or the ability to travel independently within the UK is essential. Adaptive working arrangements are available.
13/05/2024
Full time
Safety Engineer (Multi-Disciplinary within defence industry including Aviation, Land, Submarine) Length: 6 months initially Location : Across the UK, once per week travel to local site Salary: £Competitive Candidates must be eligible for SC Clearance or hold active SC Clearance. Role Overview: As a Safety Engineer, you will be responsible for ensuring the safety of various systems across different disciplines. The main duties of the role include conducting safety analysis, producing hazard reports and safety assessment reports, maintaining hazard logs, and supporting the documentation and records management related to safety management systems. Key Responsibilities: Conduct safety analysis on a range of mission support systems across multiple disciplines. Produce hazard analysis reports and safety assessment reports for different systems. Maintain hazard logs and produce related reports. Support the maintenance, control, and configuration management of documentation and records for safety management systems of various mission systems. Qualifications and Experience: A degree in a relevant engineering discipline or a minimum of 3 years' experience in a safety-related role within a relevant sector. Essential Skills: Experience with software- and safety-related standards. Demonstrated experience in functional safety of complex systems. Proficiency in safety engineering tools and techniques, such as developing safety assurance cases, conducting failure analysis, and managing hazard logs. Desirable Skills: Knowledge of relevant regulatory publications. Experience in demonstrating functional safety within different sectors. Familiarity with aviation mission planning systems and electronic flight bag applications/standards. Understanding of aircraft integration requirements and challenges. Experience in stakeholder management within relevant environments. Additional Requirements: The role may require occasional travel within the UK. A Full UK Driver's License or the ability to travel independently within the UK is essential. Adaptive working arrangements are available.
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
13/05/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.