We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
29/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
We are currently looking on behalf of one of our important clients for an Electronic Hardware Design Engineer. The role is a permanent position based Bern Canton & comes with some home office allowance. Your Role: Develop Electronics Solutions for customers, projects & a new product portfolio. Design, implement, document & verify Electronic HW for new & existing control systems. Work on international projects & participate in risk & safety assessments within interdisciplinary teams. Design prototypes & test infrastructure & automation solutions, implement them, take over technical product support across the entire product life cycle & support with production, assembly & commissioning work. Plan & carry out standard tests in-house, in external test laboratories & on customer premises. Your Skills: At least 3 years of relevant professional experience in Electronic Hardware Engineering & very proficient Electronic Development skills. Skilled & experienced in the Development of Industrial Control Electronics (CAN, BLDC, ACDC, EMC). Good Soldering skills. A knowledge of one or more PCB design tools (OrCAD, Altium, Mentor) is considered advantageous. Any experience in Python, C/C++ or similar programming languages is a plus. Ideally experienced in Motor Control. Experience in Obsolescence Management is desirable. Preferably experienced in the Transportation Industry, Industrial Environments, Safety-Critical Industries & Series Production. Your Profile: Completed University Degree in the field of Electronics, Electrical Engineering, Computer Science or similar. Enthusiastic to cooperate within Interdisciplinary Project Teams. Fluent in English (spoken & written). Any additional language skills in German or French are considered very advantageous.
29/04/2024
Full time
We are currently looking on behalf of one of our important clients for an Electronic Hardware Design Engineer. The role is a permanent position based Bern Canton & comes with some home office allowance. Your Role: Develop Electronics Solutions for customers, projects & a new product portfolio. Design, implement, document & verify Electronic HW for new & existing control systems. Work on international projects & participate in risk & safety assessments within interdisciplinary teams. Design prototypes & test infrastructure & automation solutions, implement them, take over technical product support across the entire product life cycle & support with production, assembly & commissioning work. Plan & carry out standard tests in-house, in external test laboratories & on customer premises. Your Skills: At least 3 years of relevant professional experience in Electronic Hardware Engineering & very proficient Electronic Development skills. Skilled & experienced in the Development of Industrial Control Electronics (CAN, BLDC, ACDC, EMC). Good Soldering skills. A knowledge of one or more PCB design tools (OrCAD, Altium, Mentor) is considered advantageous. Any experience in Python, C/C++ or similar programming languages is a plus. Ideally experienced in Motor Control. Experience in Obsolescence Management is desirable. Preferably experienced in the Transportation Industry, Industrial Environments, Safety-Critical Industries & Series Production. Your Profile: Completed University Degree in the field of Electronics, Electrical Engineering, Computer Science or similar. Enthusiastic to cooperate within Interdisciplinary Project Teams. Fluent in English (spoken & written). Any additional language skills in German or French are considered very advantageous.
Senior Systems Engineer - DOORS - Naval/Maritime - Radar OUTSIDE IR35 AVAILABLE Job Functions Activities will include all aspects of the Systems Engineering life cycle from System Concept through to Delivery and Acceptance, including Bid Support, System Design, Integration, Verification and Customer Acceptance. You will be responsible for the specification, development, integration, verification and acceptance of systems for both Internal and External Customers. You will have the ability to deal with a variety of people from different disciplines, organisations and nationalities on a daily basis to deliver the systems engineering aspects of projects, as required. You will take an active role in the definition, realisation and proving of new products which build upon reputation for innovation and leading edge technology. You will manage stakeholders throughout the system life cycle through a pro-active approach and effective communication. You will create a variety of technical documentation for both technical and non-technical readership. Travel within the UK and overseas is required and is considered a regular feature of this role. Requests could be made at short notice. Any other task associated with this role Requirements Essential Experience of systems design, integration & test. An understanding of Systems and Product life cycles from concept through to delivery. An understanding of a range of Engineering disciplines (Software, Mechanical, and Electrical). Good inter-personal skills with the ability to communicate to all levels within the organisation and externally. The flexibility to apply skills and knowledge across a number of different projects and products across the organisation. Computer literate with a good standard of written English, capable of compiling accurate, detailed and well-presented technical proposals, specifications and reports. A willingness to travel. (NB whilst this role is based at our Enfield premises, a certain amount of business travel will be required depending upon project requirements). Degree (or equivalent) qualified in an engineering or science discipline. Desirable (Not Essential) An understanding of Radar Systems is desirable, although not essential if other complementary skills demonstrate a capacity to understand new technologies quickly and effectively. Experience of the whole product life cycle (concept generation, concept demonstration, development, production and in-service support). Experience of working with and developing systems using communications protocols. (eg, RS485, RS232, TCP/IP, Canbus etc.) Experience of working on product development for Naval Platforms. Experience of working on or with Navigation equipment. The ability to lead multi-skilled engineering teams. The ability to deliver engineering packages of work to time, cost, and quality. Member of a Professional Engineering Institution (eg, IMechE, IET, INCOSE). UK Security clearance. UK Driving License.
29/04/2024
Project-based
Senior Systems Engineer - DOORS - Naval/Maritime - Radar OUTSIDE IR35 AVAILABLE Job Functions Activities will include all aspects of the Systems Engineering life cycle from System Concept through to Delivery and Acceptance, including Bid Support, System Design, Integration, Verification and Customer Acceptance. You will be responsible for the specification, development, integration, verification and acceptance of systems for both Internal and External Customers. You will have the ability to deal with a variety of people from different disciplines, organisations and nationalities on a daily basis to deliver the systems engineering aspects of projects, as required. You will take an active role in the definition, realisation and proving of new products which build upon reputation for innovation and leading edge technology. You will manage stakeholders throughout the system life cycle through a pro-active approach and effective communication. You will create a variety of technical documentation for both technical and non-technical readership. Travel within the UK and overseas is required and is considered a regular feature of this role. Requests could be made at short notice. Any other task associated with this role Requirements Essential Experience of systems design, integration & test. An understanding of Systems and Product life cycles from concept through to delivery. An understanding of a range of Engineering disciplines (Software, Mechanical, and Electrical). Good inter-personal skills with the ability to communicate to all levels within the organisation and externally. The flexibility to apply skills and knowledge across a number of different projects and products across the organisation. Computer literate with a good standard of written English, capable of compiling accurate, detailed and well-presented technical proposals, specifications and reports. A willingness to travel. (NB whilst this role is based at our Enfield premises, a certain amount of business travel will be required depending upon project requirements). Degree (or equivalent) qualified in an engineering or science discipline. Desirable (Not Essential) An understanding of Radar Systems is desirable, although not essential if other complementary skills demonstrate a capacity to understand new technologies quickly and effectively. Experience of the whole product life cycle (concept generation, concept demonstration, development, production and in-service support). Experience of working with and developing systems using communications protocols. (eg, RS485, RS232, TCP/IP, Canbus etc.) Experience of working on product development for Naval Platforms. Experience of working on or with Navigation equipment. The ability to lead multi-skilled engineering teams. The ability to deliver engineering packages of work to time, cost, and quality. Member of a Professional Engineering Institution (eg, IMechE, IET, INCOSE). UK Security clearance. UK Driving License.
Job Title: Mobile Packet Core & RAN Optimisation Expert Location: Reading & Remote Job Type: Contract Duration: 6 month initially Start Date: 1st May 2024 Pay Rate: TBC Flint UK Technology Services is looking for a Mobile Packet Core & RAN Optimisation Expert to join one of our telecommunications clients. We are looking for someone with a deep understanding of 3G, 4G and 5G packet Core Network architecture & operation as well as good understanding of RAN performance and demonstrable E2E optimization expertise in improving data customer experience via suggesting Network tuning & design changes as well interfacing with the packet core operations team to resolve ongoing systematic issues. Responsibilities: Monitor network performance through RAN and Core network OSS KPIs as well as crowdsource data. Work as Part of the network performance improvement team to deliver analysis for 4G and 5G Network performance through Drive test, network traces, crowd data and KPI analysis to improve the overall network performance focused on these technologies. Propose and pursue the required Packet Data Performance Improvement Design recommendation and changes. Suggest different features & parameter improvements to support the End-to-End Performance objectives related to Packet Data Performance Drive continuous improvements in Network Performance by focusing on Customer experience KPIs. Work in conjunction with team of E2E RAN, IMS Core & Transmission Design teams to ensure appropriate End to End solutions are delivered & ensure Packet Core Network Performance & Customer experience KPI Targets are maintained/exceeded. Skills, Experience and Qualifications Be an expert in Evolved Packet Core Network (MME, Packet Gateway, PCRF,) & preferably IMS Core (CSCF, MTAS - Multimedia Telephony Application Server, SBG, BGF/MRF). Good working knowledge of 3G MPC elements (GGSN, SGSN, DNS) and associated interfaces including key protocols including GTP, Radius, Diameter, RANAP and MAP. Deep Understanding of End-to-End VoLTE Solution and understanding of enriched communication services solutions Must have deep knowledge of Packet Troubleshooting and trace analysis. You will have experience using network statistics, network traces and drive trialling logs to analyse and improve network performance. Tracing tools eg Wireshark, NetScout, Empirix Must have wide experience in troubleshooting HW, SW & Signalling flow problems. Ability to provide technical solutions for network performance & optimisation of 4G and 5G networks. Five or more years of experience in an Established Mobile Network Operator or Vendor/Consultancy with genuine experience in technical projects with LTE/VoLTE/5G technology. Demonstrate the ability to communicate with multiple stakeholders within the organisation and ability to convert business requirements into a technical solution. You will have strong communication and presentation skills including presenting complex technical information in simple terms. BA/BS degree in computer science, telecommunication, electrical engineer or equivalent Excellent working knowledge of MS Office tools including Word, Powerpoint & Excel.
29/04/2024
Project-based
Job Title: Mobile Packet Core & RAN Optimisation Expert Location: Reading & Remote Job Type: Contract Duration: 6 month initially Start Date: 1st May 2024 Pay Rate: TBC Flint UK Technology Services is looking for a Mobile Packet Core & RAN Optimisation Expert to join one of our telecommunications clients. We are looking for someone with a deep understanding of 3G, 4G and 5G packet Core Network architecture & operation as well as good understanding of RAN performance and demonstrable E2E optimization expertise in improving data customer experience via suggesting Network tuning & design changes as well interfacing with the packet core operations team to resolve ongoing systematic issues. Responsibilities: Monitor network performance through RAN and Core network OSS KPIs as well as crowdsource data. Work as Part of the network performance improvement team to deliver analysis for 4G and 5G Network performance through Drive test, network traces, crowd data and KPI analysis to improve the overall network performance focused on these technologies. Propose and pursue the required Packet Data Performance Improvement Design recommendation and changes. Suggest different features & parameter improvements to support the End-to-End Performance objectives related to Packet Data Performance Drive continuous improvements in Network Performance by focusing on Customer experience KPIs. Work in conjunction with team of E2E RAN, IMS Core & Transmission Design teams to ensure appropriate End to End solutions are delivered & ensure Packet Core Network Performance & Customer experience KPI Targets are maintained/exceeded. Skills, Experience and Qualifications Be an expert in Evolved Packet Core Network (MME, Packet Gateway, PCRF,) & preferably IMS Core (CSCF, MTAS - Multimedia Telephony Application Server, SBG, BGF/MRF). Good working knowledge of 3G MPC elements (GGSN, SGSN, DNS) and associated interfaces including key protocols including GTP, Radius, Diameter, RANAP and MAP. Deep Understanding of End-to-End VoLTE Solution and understanding of enriched communication services solutions Must have deep knowledge of Packet Troubleshooting and trace analysis. You will have experience using network statistics, network traces and drive trialling logs to analyse and improve network performance. Tracing tools eg Wireshark, NetScout, Empirix Must have wide experience in troubleshooting HW, SW & Signalling flow problems. Ability to provide technical solutions for network performance & optimisation of 4G and 5G networks. Five or more years of experience in an Established Mobile Network Operator or Vendor/Consultancy with genuine experience in technical projects with LTE/VoLTE/5G technology. Demonstrate the ability to communicate with multiple stakeholders within the organisation and ability to convert business requirements into a technical solution. You will have strong communication and presentation skills including presenting complex technical information in simple terms. BA/BS degree in computer science, telecommunication, electrical engineer or equivalent Excellent working knowledge of MS Office tools including Word, Powerpoint & Excel.
Position Available: Electrical Fitter Location: Bolton - Dynamic Working Hours Salary: Up to £39,000 + Paid Overtime & Company Bonus & Very Good Pension Package, Subsidised Canteen onsite Experience needed: Experience in manufacturing and testing within the electrical department. Experience working to a high level of workmanship standards and following product certification procedures, as well as keeping within allocated budgets and timescales. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for an Electrical Fitter to work in our team. In this role you will support the team in: Ensuring manufacturing build times are met. Maintaining a safe working environment and a good housekeeping policy. Ensuring compliance across all stages of the manufacturing process. Maintaining product certification and approval via regular audits. Certifying products in line with product certification procedures. What we need from you: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 is essential for this role. Formal further education certificate to HNC or equivalent certificate is a plus. Ideally have manual handling training but not essential, training can be provided. Ideally training (Including overhead cranes) but not essential, training can be provided. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable. If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
26/04/2024
Full time
Position Available: Electrical Fitter Location: Bolton - Dynamic Working Hours Salary: Up to £39,000 + Paid Overtime & Company Bonus & Very Good Pension Package, Subsidised Canteen onsite Experience needed: Experience in manufacturing and testing within the electrical department. Experience working to a high level of workmanship standards and following product certification procedures, as well as keeping within allocated budgets and timescales. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for an Electrical Fitter to work in our team. In this role you will support the team in: Ensuring manufacturing build times are met. Maintaining a safe working environment and a good housekeeping policy. Ensuring compliance across all stages of the manufacturing process. Maintaining product certification and approval via regular audits. Certifying products in line with product certification procedures. What we need from you: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 is essential for this role. Formal further education certificate to HNC or equivalent certificate is a plus. Ideally have manual handling training but not essential, training can be provided. Ideally training (Including overhead cranes) but not essential, training can be provided. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable. If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Introduction: Our client stands as an approved Maintenance Repair Organisation accredited by both EASA and UK CAA, entrusted with delivering Line & Base Maintenance services for a range of aircraft including the B737 NG, B737 Max, B777, and B787. As part of their ongoing growth, we are seeking B1 Licensed Aircraft Engineers to join our esteemed organisation. Candidates should hold a valid UK CAA Category B1 Part-66 Licence, with type ratings on B737 NG, B777, and/or B787 aircraft. Responsibilities: The B1 Licensed Aircraft Engineer will take charge of supervising Mechanics and overseeing inspection and certification of scheduled maintenance tasks, defect rectification, modifications, structural repairs, and functional tests across Airframe, Engine, and Electrical systems. They will collaborate closely with the Aircraft Check Manager to ensure the completion of daily workload tasks and adherence to the production plan. These positions will be under the guidance of the Maintenance Manager - Production and are stationed at our London Gatwick Hangar facility, offering various shift patterns for flexibility. Key Responsibilities: Supervising Mechanics performing Base Maintenance on customer aircraft. Inspecting and certifying scheduled maintenance tasks, defect rectification, modifications, structural repairs, and functional tests on Airframe, Engine, and Electrical systems. Completing all assigned work promptly to minimise aircraft downtime. Ensuring accurate completion of aircraft technical log books, maintenance documentation, job cards, work packages, and zonal handovers within designated timelines. Maintaining high standards of cleanliness and organisation within assigned work areas. Adhering to regulatory requirements, company processes, and procedures. Fostering a culture of safety and reporting all incidents and occurrences in the Boeing Safety Management System. Highlighting technical issues, discrepancies, or other concerns to the Aircraft Check Manager. Actively contributing to continuous improvement initiatives and lean principles. Assisting the management team in the day-to-day operations of the London Gatwick Operation. Undertaking additional duties as required, including potential work away from London Gatwick. Required Qualifications and Experience: Hold a valid UK CAA Category B1 Part-66 Licence. Type rating on one or more of the following aircraft - B737 NG, B777, or B787. Minimum of 1 year exercising certification privileges in a Line or Base Maintenance environment. Demonstrate 6 months recent experience on type and ability to maintain appropriate company authorisations specific to the role. Thorough understanding of Part-145 regulations. Previous experience using AMOS or other Maintenance Management Systems. Strong communication skills and effective problem-solving abilities. Flexibility to adjust working hours to meet operational demands. Team-oriented mindset with a commitment to exceeding internal and external customer expectations. Proficiency in using Microsoft Office applications and willingness to learn in-house systems. Eligibility to hold a London Gatwick Airport airside pass. Candidates must have the right to live and work in the United Kingdom. Work Authorisation: This position is open to locally hired candidates in the United Kingdom who possess current legal authorisation to work in the country. Sadly, our client will not pursue immigration or labour sponsorship for applicants.
26/04/2024
Project-based
Introduction: Our client stands as an approved Maintenance Repair Organisation accredited by both EASA and UK CAA, entrusted with delivering Line & Base Maintenance services for a range of aircraft including the B737 NG, B737 Max, B777, and B787. As part of their ongoing growth, we are seeking B1 Licensed Aircraft Engineers to join our esteemed organisation. Candidates should hold a valid UK CAA Category B1 Part-66 Licence, with type ratings on B737 NG, B777, and/or B787 aircraft. Responsibilities: The B1 Licensed Aircraft Engineer will take charge of supervising Mechanics and overseeing inspection and certification of scheduled maintenance tasks, defect rectification, modifications, structural repairs, and functional tests across Airframe, Engine, and Electrical systems. They will collaborate closely with the Aircraft Check Manager to ensure the completion of daily workload tasks and adherence to the production plan. These positions will be under the guidance of the Maintenance Manager - Production and are stationed at our London Gatwick Hangar facility, offering various shift patterns for flexibility. Key Responsibilities: Supervising Mechanics performing Base Maintenance on customer aircraft. Inspecting and certifying scheduled maintenance tasks, defect rectification, modifications, structural repairs, and functional tests on Airframe, Engine, and Electrical systems. Completing all assigned work promptly to minimise aircraft downtime. Ensuring accurate completion of aircraft technical log books, maintenance documentation, job cards, work packages, and zonal handovers within designated timelines. Maintaining high standards of cleanliness and organisation within assigned work areas. Adhering to regulatory requirements, company processes, and procedures. Fostering a culture of safety and reporting all incidents and occurrences in the Boeing Safety Management System. Highlighting technical issues, discrepancies, or other concerns to the Aircraft Check Manager. Actively contributing to continuous improvement initiatives and lean principles. Assisting the management team in the day-to-day operations of the London Gatwick Operation. Undertaking additional duties as required, including potential work away from London Gatwick. Required Qualifications and Experience: Hold a valid UK CAA Category B1 Part-66 Licence. Type rating on one or more of the following aircraft - B737 NG, B777, or B787. Minimum of 1 year exercising certification privileges in a Line or Base Maintenance environment. Demonstrate 6 months recent experience on type and ability to maintain appropriate company authorisations specific to the role. Thorough understanding of Part-145 regulations. Previous experience using AMOS or other Maintenance Management Systems. Strong communication skills and effective problem-solving abilities. Flexibility to adjust working hours to meet operational demands. Team-oriented mindset with a commitment to exceeding internal and external customer expectations. Proficiency in using Microsoft Office applications and willingness to learn in-house systems. Eligibility to hold a London Gatwick Airport airside pass. Candidates must have the right to live and work in the United Kingdom. Work Authorisation: This position is open to locally hired candidates in the United Kingdom who possess current legal authorisation to work in the country. Sadly, our client will not pursue immigration or labour sponsorship for applicants.
Electrical Design Engineer Location: Derby Salary: £40,000 to £55,000 plus bonus & benefits Are you an Electrical Design Engineer who enjoys the cut and thrust of working on a varied landscape? Have you worked in regulated industries? I am working with a well-regarded consultancy who have over 25 years in industry, working with the likes of Dyson, Rolls Royce and similar corporations. This role with give an Electrical Design Engineer the opportunity to not only work on specific Electrical design but be exposed to a multidisciplinary Design Team seeing all mechanical and electronic elements to the projects. They boast a strong order book and this role is an expansion to the Design Team, if you have 3 years or more in industry, we want to hear from you. In this role you will be involved from the start of the project right through to inception, working closely with production and testing. What our client needs: Educated to HNC/HND or Degree in Electrical Engineering Experience within industry of over 3 years in Electrical Design Worked ideally in a consultancy or able to demonstrate multi-project experience Solidworks Electrical or E Plan design packages used PLC knowledge is a bonus and not essential What's in it for you? An opportunity to work with a plethora of household names in Automotive, Aerospace, Consumer Product and many more Flexible Start and Finish times Private Medical Cover Competitive Salary and Company Pension Contributions Please apply with an up to date CV or contact me
26/04/2024
Full time
Electrical Design Engineer Location: Derby Salary: £40,000 to £55,000 plus bonus & benefits Are you an Electrical Design Engineer who enjoys the cut and thrust of working on a varied landscape? Have you worked in regulated industries? I am working with a well-regarded consultancy who have over 25 years in industry, working with the likes of Dyson, Rolls Royce and similar corporations. This role with give an Electrical Design Engineer the opportunity to not only work on specific Electrical design but be exposed to a multidisciplinary Design Team seeing all mechanical and electronic elements to the projects. They boast a strong order book and this role is an expansion to the Design Team, if you have 3 years or more in industry, we want to hear from you. In this role you will be involved from the start of the project right through to inception, working closely with production and testing. What our client needs: Educated to HNC/HND or Degree in Electrical Engineering Experience within industry of over 3 years in Electrical Design Worked ideally in a consultancy or able to demonstrate multi-project experience Solidworks Electrical or E Plan design packages used PLC knowledge is a bonus and not essential What's in it for you? An opportunity to work with a plethora of household names in Automotive, Aerospace, Consumer Product and many more Flexible Start and Finish times Private Medical Cover Competitive Salary and Company Pension Contributions Please apply with an up to date CV or contact me
Soldering Technician Hedge End, Southampton (Onsite working) £30,000 to £35,000 per year (plus company benefits) The Opportunity: ISR are recruiting for an international technology company who are currently looking for a Soldering Technician to join their Southampton based team. The ideal candidate will have experience working with surface mount technology (SMT) and through-hole components, as well as having used multimeters and oscilloscopes in a production environment. This role offers a long term career opportunity for someone who is looking for a stable and supportive environment, as well as the opportunity to gain training in fault finding PCBs to component level. Role and Responsibilities: Work with surface mount technology (SMT) and through-hole components Use electrical and hand tools to solder electronic components. Follow technical drawings and instructions to complete soldering tasks. Test and inspect finished products to ensure they meet quality standards. Troubleshoot and repair defective products as needed. Cutting, stripping and soldering cables into PCB's This position requires a candidate who has strong attention to detail, good hand-eye coordination and a methodical approach to work. If you have a passion for electronics and possess the required soldering skills we'd be keen to discuss the role and your suitability in more detail. Applications: To hear more about our client and this opportunity working as a Soldering Technician based in Hedge End, Southampton: please call James Sample at ISR Recruitment or please send me your latest CV or online profile for an immediate call back.
26/04/2024
Full time
Soldering Technician Hedge End, Southampton (Onsite working) £30,000 to £35,000 per year (plus company benefits) The Opportunity: ISR are recruiting for an international technology company who are currently looking for a Soldering Technician to join their Southampton based team. The ideal candidate will have experience working with surface mount technology (SMT) and through-hole components, as well as having used multimeters and oscilloscopes in a production environment. This role offers a long term career opportunity for someone who is looking for a stable and supportive environment, as well as the opportunity to gain training in fault finding PCBs to component level. Role and Responsibilities: Work with surface mount technology (SMT) and through-hole components Use electrical and hand tools to solder electronic components. Follow technical drawings and instructions to complete soldering tasks. Test and inspect finished products to ensure they meet quality standards. Troubleshoot and repair defective products as needed. Cutting, stripping and soldering cables into PCB's This position requires a candidate who has strong attention to detail, good hand-eye coordination and a methodical approach to work. If you have a passion for electronics and possess the required soldering skills we'd be keen to discuss the role and your suitability in more detail. Applications: To hear more about our client and this opportunity working as a Soldering Technician based in Hedge End, Southampton: please call James Sample at ISR Recruitment or please send me your latest CV or online profile for an immediate call back.
A global medical device company are looking for an Electrical Engineer to join their Engineering team on a contract basis. Your role will be to design and build test systems. The role will include wide breadth of activities within. From understanding product stand point to testing the product with the sub assembly to building an automated production system. Working knowledge of piezos is essential. Essential skills: Broad understanding of electrical or electronic systems Understanding of components and sensors Working knowledge piezos Adaptability Desirable skills: Medical device or other regulated industry experience The start date is for ASAP. The initial contract length is for 6 months (with extension options after). The role is based in County Tipperary and will require 3 days onsite per week, the rest of the time you can work remotely. The rate is €60 per hour, depending on experience, if you have any expenses please let me know and I can factor that into the rate for you. If you are interested in the role please send me your latest CV and I will call you to discuss the further details. Please visit our website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Real Staffing, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy| Registered office | London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
26/04/2024
Project-based
A global medical device company are looking for an Electrical Engineer to join their Engineering team on a contract basis. Your role will be to design and build test systems. The role will include wide breadth of activities within. From understanding product stand point to testing the product with the sub assembly to building an automated production system. Working knowledge of piezos is essential. Essential skills: Broad understanding of electrical or electronic systems Understanding of components and sensors Working knowledge piezos Adaptability Desirable skills: Medical device or other regulated industry experience The start date is for ASAP. The initial contract length is for 6 months (with extension options after). The role is based in County Tipperary and will require 3 days onsite per week, the rest of the time you can work remotely. The rate is €60 per hour, depending on experience, if you have any expenses please let me know and I can factor that into the rate for you. If you are interested in the role please send me your latest CV and I will call you to discuss the further details. Please visit our website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Real Staffing, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy| Registered office | London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
Field Engineer- English Speaking location Littau,Switzerland General aim of the position - Install/integrate and maintain telecommunication and infrastructure equipments in the wireless and Wireline networks within the assigned geographical area; - Daily travel to customers' network sites to perform tasks in the areas fulfilment, assurance and preventive maintenance; - Participate in oncall service rota. Main tasks Assurance - Follow troubleshooting procedures with the support from NOC and restore network services within the defined SLA; - Use the available tools and perform measurements to isolate and fix the faults; - Replace faulty equipment parts and perform functional tests to validate the troubleshooting results; - Implement temporary solutions whenever appropriate to help faster service restoration; - Log all actions and update the current status into the trouble ticketing tools; - Follow the spare part handling processes; - Support risk assessment activities when required; - Participate in 24x7 oncall rota. Fulfilment - Implement work orders, perform equipment installation, activation, site integration and testing within the defined SLA; - Record the implementation results into the corresponding tools, fill in service reports; - Activate the services and changes in the network together with NOC and/or customer DSS; - Notify and update NOC and/or customer DSS with the status of the changes during implementation; Preventive Maintenance - Perform preventive maintenance activities within the defined SLA; - Follow the preventive maintenance guidelines; - Perform site audits; - Resolve any issues and deficiencies found on site, including the ones discovered during site visits. - Support the Field Technician for complex tasks; - Member of project teams within Field Services. Required competencies - willingness to travel on a daily basis; - solid understanding of security and safety rules and standards; - not afraid to climb on masts and towers; - Education: recognised apprenticeship in the electrical or telecom area (eg electrician, electronician, multimedia technician, ) advanced education in telecom technologies (eg. telematician) is an advantage. Please send your CVS to: (see below)
26/04/2024
Full time
Field Engineer- English Speaking location Littau,Switzerland General aim of the position - Install/integrate and maintain telecommunication and infrastructure equipments in the wireless and Wireline networks within the assigned geographical area; - Daily travel to customers' network sites to perform tasks in the areas fulfilment, assurance and preventive maintenance; - Participate in oncall service rota. Main tasks Assurance - Follow troubleshooting procedures with the support from NOC and restore network services within the defined SLA; - Use the available tools and perform measurements to isolate and fix the faults; - Replace faulty equipment parts and perform functional tests to validate the troubleshooting results; - Implement temporary solutions whenever appropriate to help faster service restoration; - Log all actions and update the current status into the trouble ticketing tools; - Follow the spare part handling processes; - Support risk assessment activities when required; - Participate in 24x7 oncall rota. Fulfilment - Implement work orders, perform equipment installation, activation, site integration and testing within the defined SLA; - Record the implementation results into the corresponding tools, fill in service reports; - Activate the services and changes in the network together with NOC and/or customer DSS; - Notify and update NOC and/or customer DSS with the status of the changes during implementation; Preventive Maintenance - Perform preventive maintenance activities within the defined SLA; - Follow the preventive maintenance guidelines; - Perform site audits; - Resolve any issues and deficiencies found on site, including the ones discovered during site visits. - Support the Field Technician for complex tasks; - Member of project teams within Field Services. Required competencies - willingness to travel on a daily basis; - solid understanding of security and safety rules and standards; - not afraid to climb on masts and towers; - Education: recognised apprenticeship in the electrical or telecom area (eg electrician, electronician, multimedia technician, ) advanced education in telecom technologies (eg. telematician) is an advantage. Please send your CVS to: (see below)
Senior Security Systems Design Engineer I am looking to hire an experienced (3-5 Years) Senior Security Systems Design Engineer on behalf of a prestigious client of mine, on a permanent basis. Our clients are looking for a motivated individual who will have experience of, and the continued desire to, see their designs through from Design to Construction, Commissioning and handover etc. Candidates wishing to apply for this position will be heavily experienced in the Technical Design Space (Electrical and Mechanical Requirements) and have the capabilities, of successfully grasping the fundamentals of a new development ie Hotel, Stadium, Airport - It goes without saying, it is imperative that the successful candidate has Practical experience! To be considered for this position you will be well versed with the RIBA process and the following Softwares ; AutoCAD, REVIT, Bluebeam Revu . You will be responsible for and able to demonstrate (not limited to), Project Planning, client briefing, developing design, task quality control procedures, resource planning and working within budgets. It is essential that you will have previously designed some or all of the following; Video Surveillance, Access Control, Intruder detection, Duress, Intercom, Control Rooms, Integrated Security Management Platforms, Gates/Barriers, Turnstiles, Car Parking Management, Key Management or Drone detection and will have previously monitored both on and off-site construction works and testing of electronic security systems. You will be a sleeves-rolled-up individual, with excellent attention to detail, who is able to deliver in various Architectural Projects. Salary: Up to £67,000 per annum Location: On site in London 3 days a week, the remainder working remotely. (Probation period fully on site)
25/04/2024
Full time
Senior Security Systems Design Engineer I am looking to hire an experienced (3-5 Years) Senior Security Systems Design Engineer on behalf of a prestigious client of mine, on a permanent basis. Our clients are looking for a motivated individual who will have experience of, and the continued desire to, see their designs through from Design to Construction, Commissioning and handover etc. Candidates wishing to apply for this position will be heavily experienced in the Technical Design Space (Electrical and Mechanical Requirements) and have the capabilities, of successfully grasping the fundamentals of a new development ie Hotel, Stadium, Airport - It goes without saying, it is imperative that the successful candidate has Practical experience! To be considered for this position you will be well versed with the RIBA process and the following Softwares ; AutoCAD, REVIT, Bluebeam Revu . You will be responsible for and able to demonstrate (not limited to), Project Planning, client briefing, developing design, task quality control procedures, resource planning and working within budgets. It is essential that you will have previously designed some or all of the following; Video Surveillance, Access Control, Intruder detection, Duress, Intercom, Control Rooms, Integrated Security Management Platforms, Gates/Barriers, Turnstiles, Car Parking Management, Key Management or Drone detection and will have previously monitored both on and off-site construction works and testing of electronic security systems. You will be a sleeves-rolled-up individual, with excellent attention to detail, who is able to deliver in various Architectural Projects. Salary: Up to £67,000 per annum Location: On site in London 3 days a week, the remainder working remotely. (Probation period fully on site)
Infoplus Technologies UK Ltd
Peterborough, Cambridgeshire
Role: Through this role, the successful candidate will have an excellent opportunity be involved in the design and development of controls and software for advanced diesel engine controls and/or hybrid systems controls. Responsibilities: Work with process partner teams (primarily Industrial Power Systems Division) to gather and develop requirements for the advanced diesel engines and hybrid power systems being developed for future, more sustainable, low carbon power systems. Create control algorithms/software models using Matlab, Simulink and Stateflow to meet diesel engine and/or hybrid power system software requirements. Conduct control system tuning/calibration activities on test bench and/or on test bed/machine to achieve desired system performance. Conduct sub-system FMEAs, documenting potential failure modes, identifying, and completing design and validation actions and managing subsequent updates. Plan and execute verification and validation testing for electronics/control system software in SiL, HiL or on-test bed or development machines. Troubleshoot and resolve electronics/control system issues encountered during engine or power system running. Competencies: Essential: Strong technical background (HNC or technical degree preferred in mechanical or electronic, electrical, control systems or automotive engineering) with 10+ Years of experience. Essential experience is working previously with Diesel Engines and having the Diesel Engine knowledge. Matlab, Simulink and Stateflow experience is essential, must've used it to create Control Algorithms. Significant, demonstrable experience of using Mathworks tools (Matlab, Simulink and Stateflow) for model-based software design and development to create Embedded software. This should have been gained in a diesel engine or hybrid power systems development environment. Ability to translate and develop customer requirements and objectives into production-ready software models. Knowledge of software FMEA and validation plan creation. Excellent communications skills & Teamwork Desirable: Good understanding of the off-highway industry, ideally gained through direct involvement in the development of powertrain, hydraulics, or other control systems. Experience of Caterpillar control software processes and tools. Experience of HiL test equipment and the ability to programme automated tests. Knowledge of software version control systems, ideally GiT or Clearcase. Knowledge of/prior experience of developing software to meet functional safety requirements.
25/04/2024
Role: Through this role, the successful candidate will have an excellent opportunity be involved in the design and development of controls and software for advanced diesel engine controls and/or hybrid systems controls. Responsibilities: Work with process partner teams (primarily Industrial Power Systems Division) to gather and develop requirements for the advanced diesel engines and hybrid power systems being developed for future, more sustainable, low carbon power systems. Create control algorithms/software models using Matlab, Simulink and Stateflow to meet diesel engine and/or hybrid power system software requirements. Conduct control system tuning/calibration activities on test bench and/or on test bed/machine to achieve desired system performance. Conduct sub-system FMEAs, documenting potential failure modes, identifying, and completing design and validation actions and managing subsequent updates. Plan and execute verification and validation testing for electronics/control system software in SiL, HiL or on-test bed or development machines. Troubleshoot and resolve electronics/control system issues encountered during engine or power system running. Competencies: Essential: Strong technical background (HNC or technical degree preferred in mechanical or electronic, electrical, control systems or automotive engineering) with 10+ Years of experience. Essential experience is working previously with Diesel Engines and having the Diesel Engine knowledge. Matlab, Simulink and Stateflow experience is essential, must've used it to create Control Algorithms. Significant, demonstrable experience of using Mathworks tools (Matlab, Simulink and Stateflow) for model-based software design and development to create Embedded software. This should have been gained in a diesel engine or hybrid power systems development environment. Ability to translate and develop customer requirements and objectives into production-ready software models. Knowledge of software FMEA and validation plan creation. Excellent communications skills & Teamwork Desirable: Good understanding of the off-highway industry, ideally gained through direct involvement in the development of powertrain, hydraulics, or other control systems. Experience of Caterpillar control software processes and tools. Experience of HiL test equipment and the ability to programme automated tests. Knowledge of software version control systems, ideally GiT or Clearcase. Knowledge of/prior experience of developing software to meet functional safety requirements.
Inspection & Test Engineer - Staffordshire - up to £35,000 I am currently working with one of the UK's leading technology and digital transformation companies, who have ben operating for over 50 years. We are recruiting for a talented and driven Wire person to join the growing Electrical Testing team, who would be responsible for ensuring that products or processes meet specified standards and requirements. This role involves developing and implementing quality control procedures, including meticulous point-to-point testing, to verify the continuity and correctness of individual connections in electrical circuits. They conduct inspections and tests, identify defects or deviations from standards, and review/check technical specifications to ensure adherence to design requirements. The successful candidate will be collaborating with various teams, Quality Assurance Engineers address and resolve quality issues, contributing to the continuous improvement of processes and systems. Requirements of the Test Engineer role: Nationally recognized technical qualification in Electrical/Electronic discipline (Examples: HNC/HND, 17th Edition C&G2382 & Inspection & Test, completed modern apprenticeship) Full driving license and car Eligibility for SC Clearance Reading and interpreting circuit diagrams, assembly prints, wiring schedules, and parts lists. Ability to conduct point-to-point testing, interpret circuit diagrams, and review technical specifications. Strong documentation skills to maintain accurate records of inspections, tests, and deviations. Ability to review and check technical specifications to ensure alignment with design requirements. About/Benefits of the Test Engineer role: The two-stage interview process is conducted over MS Teams, with working hours from 8 am to 5 pm (half day on Fridays). The position includes benefits such as 25 days holiday, life assurance, private health care, and a strong pension plan. To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Erin-Mae McDonagh , by exploring the VIQU IT Recruitment website . If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply).
25/04/2024
Full time
Inspection & Test Engineer - Staffordshire - up to £35,000 I am currently working with one of the UK's leading technology and digital transformation companies, who have ben operating for over 50 years. We are recruiting for a talented and driven Wire person to join the growing Electrical Testing team, who would be responsible for ensuring that products or processes meet specified standards and requirements. This role involves developing and implementing quality control procedures, including meticulous point-to-point testing, to verify the continuity and correctness of individual connections in electrical circuits. They conduct inspections and tests, identify defects or deviations from standards, and review/check technical specifications to ensure adherence to design requirements. The successful candidate will be collaborating with various teams, Quality Assurance Engineers address and resolve quality issues, contributing to the continuous improvement of processes and systems. Requirements of the Test Engineer role: Nationally recognized technical qualification in Electrical/Electronic discipline (Examples: HNC/HND, 17th Edition C&G2382 & Inspection & Test, completed modern apprenticeship) Full driving license and car Eligibility for SC Clearance Reading and interpreting circuit diagrams, assembly prints, wiring schedules, and parts lists. Ability to conduct point-to-point testing, interpret circuit diagrams, and review technical specifications. Strong documentation skills to maintain accurate records of inspections, tests, and deviations. Ability to review and check technical specifications to ensure alignment with design requirements. About/Benefits of the Test Engineer role: The two-stage interview process is conducted over MS Teams, with working hours from 8 am to 5 pm (half day on Fridays). The position includes benefits such as 25 days holiday, life assurance, private health care, and a strong pension plan. To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Erin-Mae McDonagh , by exploring the VIQU IT Recruitment website . If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply).
Senior Applications Engineer (Automotive & Defence) - RL7365 Salary Competitive Benefits Excellent Benefits Location Paris The Client Curo are partnering with a Global Company who deliver their B2B Customers cutting-edge technology. Their automated test and assurance solutions accelerate technology development in the lab, and ensure new products and services perform in the real world. Their innovative portfolio of products and services address the test, assurance, and automation challenges of a new generation of technologies: 5G, SD-WAN, Cloud, Autonomous Vehicles and beyond. The company designs, manufactures, and supplies advanced satellite navigation test and simulation systems, many of which comprise radio frequency signal generators and computer systems running complex application software; all designed in-house. The Candidate The successful candidate will have industry experience with Positioning, Navigation & Timing (PNT)/Global navigation satellite systems (GNSS), or similar wireless technologies including test methodology and analysis skills. The role requires a confident communicator, who has the ability to explain and present technical solutions and the benefits they provide to the organisations clients in the Defence and Automotive space. We are looking for a driver, to facilitate client visits. The Role As an Applications Engineer, you would be focusing predominantly on the military and automotive market. Reporting into the professional services team based in the UK, you will be responsible for assisting the BD teams in providing technical pre-sales and apps support in a timely fashion based on the opportunity and complexity at hand. Whilst working closely with customers it would be expected of you to build a relationship with the customer, develop deep understanding of their use case and provide feedback back to the Professional Services team and wider Business Unit. Some elements of delivering Professional Services mostly in EMEA could also be part of the role. You will have a close working relationship with peers in Sales, Global Services, and Business Development. In addition, the role will be hybrid with occasional visits to the organisations UK office in Devon and customer site locations, particularly across the EMEA sector as needed. Key Duties Provide technical and applications support primarily in pre-sales but also in post-sales situations. Engage in complex technical discussions with customers to understand their needs. Utilize deep knowledge of the companys products and services to align appropriate solutions based on client needs. Help design solutions and formulate responses to RFx, deliver POC/demos, and present solutions to customers. Liaise closely with engineering, professional services and tailored solutions teams to address complex customer requests. Grow depth of relationships with customers in the Defence and Automotive markets. Staying abreast of developments in GNSS/PNT technologies and test methodologies. Provide customer feedback on products, services, and process improvements as needed. Work closely with Sales Enablement team to generate application-specific materials. Requirements Bachelors degree in electrical engineering, Computer Science, or another technical field from an accredited university; or equivalent work experience. Significant experience of relevant industry experience with GNSS, PNT or similar technologies. Familiarity with test automation programming environments including LabView,Matlab desirable. Self-motivated team player with proven problem-solving skills. Experience in a customer-facing role is preferred. Ability to communicate technical material clearly, both verbally and in writing. Ability to work closely with other people to solve challenging problems. Experience using GNSS Test Equipment and/or GNSS receivers is a plus. Travel may be required up to 25% To apply for this Senior Applications Engineer permanent job, please click the button below and submit your latest CV. Curo Services endeavours to respond to all applications, however this may not always be possible during periods of high volume. Thank you for your patience. Curo Services is a trading name of Curo Resourcing Ltd and acts as an Employment Business for contract and temporary recruitment as well as an Employment Agency in relation to permanent vacancies.
25/04/2024
Full time
Senior Applications Engineer (Automotive & Defence) - RL7365 Salary Competitive Benefits Excellent Benefits Location Paris The Client Curo are partnering with a Global Company who deliver their B2B Customers cutting-edge technology. Their automated test and assurance solutions accelerate technology development in the lab, and ensure new products and services perform in the real world. Their innovative portfolio of products and services address the test, assurance, and automation challenges of a new generation of technologies: 5G, SD-WAN, Cloud, Autonomous Vehicles and beyond. The company designs, manufactures, and supplies advanced satellite navigation test and simulation systems, many of which comprise radio frequency signal generators and computer systems running complex application software; all designed in-house. The Candidate The successful candidate will have industry experience with Positioning, Navigation & Timing (PNT)/Global navigation satellite systems (GNSS), or similar wireless technologies including test methodology and analysis skills. The role requires a confident communicator, who has the ability to explain and present technical solutions and the benefits they provide to the organisations clients in the Defence and Automotive space. We are looking for a driver, to facilitate client visits. The Role As an Applications Engineer, you would be focusing predominantly on the military and automotive market. Reporting into the professional services team based in the UK, you will be responsible for assisting the BD teams in providing technical pre-sales and apps support in a timely fashion based on the opportunity and complexity at hand. Whilst working closely with customers it would be expected of you to build a relationship with the customer, develop deep understanding of their use case and provide feedback back to the Professional Services team and wider Business Unit. Some elements of delivering Professional Services mostly in EMEA could also be part of the role. You will have a close working relationship with peers in Sales, Global Services, and Business Development. In addition, the role will be hybrid with occasional visits to the organisations UK office in Devon and customer site locations, particularly across the EMEA sector as needed. Key Duties Provide technical and applications support primarily in pre-sales but also in post-sales situations. Engage in complex technical discussions with customers to understand their needs. Utilize deep knowledge of the companys products and services to align appropriate solutions based on client needs. Help design solutions and formulate responses to RFx, deliver POC/demos, and present solutions to customers. Liaise closely with engineering, professional services and tailored solutions teams to address complex customer requests. Grow depth of relationships with customers in the Defence and Automotive markets. Staying abreast of developments in GNSS/PNT technologies and test methodologies. Provide customer feedback on products, services, and process improvements as needed. Work closely with Sales Enablement team to generate application-specific materials. Requirements Bachelors degree in electrical engineering, Computer Science, or another technical field from an accredited university; or equivalent work experience. Significant experience of relevant industry experience with GNSS, PNT or similar technologies. Familiarity with test automation programming environments including LabView,Matlab desirable. Self-motivated team player with proven problem-solving skills. Experience in a customer-facing role is preferred. Ability to communicate technical material clearly, both verbally and in writing. Ability to work closely with other people to solve challenging problems. Experience using GNSS Test Equipment and/or GNSS receivers is a plus. Travel may be required up to 25% To apply for this Senior Applications Engineer permanent job, please click the button below and submit your latest CV. Curo Services endeavours to respond to all applications, however this may not always be possible during periods of high volume. Thank you for your patience. Curo Services is a trading name of Curo Resourcing Ltd and acts as an Employment Business for contract and temporary recruitment as well as an Employment Agency in relation to permanent vacancies.
Annual Salary offered like £50K-55K GBP per annum maximum We are seeking an experienced and detail-oriented Electrical Systems Engineer to join our team. The successful candidate will be responsible for designing, developing, and maintaining electrical systems for our engineering projects. The ideal candidate will have a passion for electronic system design, excellent communication skills, and a solutions-focused mindset. Key Responsibilities: Design, develop, and test electrical systems. Collaborate with cross-functional teams to ensure seamless integration of electrical systems with other components. Conduct thorough analysis and troubleshooting of electrical systems to identify and resolve issues. Present complex technical concepts to a broad stakeholder audience in a clear and concise manner. Work effectively under pressure to meet project deadlines and deliverables. Maintain a solutions-focused approach, actively seeking opportunities for innovation and improvement. Document all design specifications, processes, and test results to ensure compliance with regulatory standards and project requirements. Requirements: Bachelor's degree in Electronic Systems Engineering, Electrical Engineering, or a related field. Minimum of 2 years of experience in a relevant industry, with a demonstrated track record of designing and implementing electrical systems. Aptitude for electronic system design with a keen eye for detail. Excellent communication skills, including the ability to convey complex technical concepts to diverse stakeholders. Resilient and able to work effectively under pressure to meet tight deadlines. Solutions-focused mindset with a drive for discovery and innovation. Familiarity with regulatory standards and requirements relevant to electrical system design and implementation. Advantageous should the candidates have any of the following Proficiency in electrical design software and tools (eg, CAD, MATLAB, LabVIEW). Benefits: 5.5 weeks holiday with a Buy & Sell holiday scheme. Competitive pension scheme. Cycle to work scheme. Death in service benefit. An opportunity for personal development and promotion. Occupational Health/Annual Medicals.
24/04/2024
Full time
Annual Salary offered like £50K-55K GBP per annum maximum We are seeking an experienced and detail-oriented Electrical Systems Engineer to join our team. The successful candidate will be responsible for designing, developing, and maintaining electrical systems for our engineering projects. The ideal candidate will have a passion for electronic system design, excellent communication skills, and a solutions-focused mindset. Key Responsibilities: Design, develop, and test electrical systems. Collaborate with cross-functional teams to ensure seamless integration of electrical systems with other components. Conduct thorough analysis and troubleshooting of electrical systems to identify and resolve issues. Present complex technical concepts to a broad stakeholder audience in a clear and concise manner. Work effectively under pressure to meet project deadlines and deliverables. Maintain a solutions-focused approach, actively seeking opportunities for innovation and improvement. Document all design specifications, processes, and test results to ensure compliance with regulatory standards and project requirements. Requirements: Bachelor's degree in Electronic Systems Engineering, Electrical Engineering, or a related field. Minimum of 2 years of experience in a relevant industry, with a demonstrated track record of designing and implementing electrical systems. Aptitude for electronic system design with a keen eye for detail. Excellent communication skills, including the ability to convey complex technical concepts to diverse stakeholders. Resilient and able to work effectively under pressure to meet tight deadlines. Solutions-focused mindset with a drive for discovery and innovation. Familiarity with regulatory standards and requirements relevant to electrical system design and implementation. Advantageous should the candidates have any of the following Proficiency in electrical design software and tools (eg, CAD, MATLAB, LabVIEW). Benefits: 5.5 weeks holiday with a Buy & Sell holiday scheme. Competitive pension scheme. Cycle to work scheme. Death in service benefit. An opportunity for personal development and promotion. Occupational Health/Annual Medicals.
Annual Salary Maximum £50k-55k GBP per annum We are seeking an experienced and detail-oriented Electrical Systems Engineer to join our team. The successful candidate will be responsible for designing, developing, and maintaining electrical systems for our engineering projects. The ideal candidate will have a passion for electronic system design, excellent communication skills, and a solutions-focused mindset. Key Responsibilities: Design, develop, and test electrical systems. Collaborate with cross-functional teams to ensure seamless integration of electrical systems with other components. Conduct thorough analysis and troubleshooting of electrical systems to identify and resolve issues. Present complex technical concepts to a broad stakeholder audience in a clear and concise manner. Work effectively under pressure to meet project deadlines and deliverables. Maintain a solutions-focused approach, actively seeking opportunities for innovation and improvement. Document all design specifications, processes, and test results to ensure compliance with regulatory standards and project requirements. Requirements: Bachelor's degree in Electronic Systems Engineering, Electrical Engineering, or a related field. Minimum of 2 years of experience in a relevant industry, with a demonstrated track record of designing and implementing electrical systems. Aptitude for electronic system design with a keen eye for detail. Excellent communication skills, including the ability to convey complex technical concepts to diverse stakeholders. Resilient and able to work effectively under pressure to meet tight deadlines. Solutions-focused mindset with a drive for discovery and innovation. Familiarity with regulatory standards and requirements relevant to electrical system design and implementation. Advantageous should the candidates have any of the following Proficiency in electrical design software and tools (eg, CAD, MATLAB, LabVIEW). Benefits: 5.5 weeks holiday with a Buy & Sell holiday scheme. Competitive pension scheme. Cycle to work scheme. Death in service benefit. An opportunity for personal development and promotion. Occupational Health/Annual Medicals.
24/04/2024
Full time
Annual Salary Maximum £50k-55k GBP per annum We are seeking an experienced and detail-oriented Electrical Systems Engineer to join our team. The successful candidate will be responsible for designing, developing, and maintaining electrical systems for our engineering projects. The ideal candidate will have a passion for electronic system design, excellent communication skills, and a solutions-focused mindset. Key Responsibilities: Design, develop, and test electrical systems. Collaborate with cross-functional teams to ensure seamless integration of electrical systems with other components. Conduct thorough analysis and troubleshooting of electrical systems to identify and resolve issues. Present complex technical concepts to a broad stakeholder audience in a clear and concise manner. Work effectively under pressure to meet project deadlines and deliverables. Maintain a solutions-focused approach, actively seeking opportunities for innovation and improvement. Document all design specifications, processes, and test results to ensure compliance with regulatory standards and project requirements. Requirements: Bachelor's degree in Electronic Systems Engineering, Electrical Engineering, or a related field. Minimum of 2 years of experience in a relevant industry, with a demonstrated track record of designing and implementing electrical systems. Aptitude for electronic system design with a keen eye for detail. Excellent communication skills, including the ability to convey complex technical concepts to diverse stakeholders. Resilient and able to work effectively under pressure to meet tight deadlines. Solutions-focused mindset with a drive for discovery and innovation. Familiarity with regulatory standards and requirements relevant to electrical system design and implementation. Advantageous should the candidates have any of the following Proficiency in electrical design software and tools (eg, CAD, MATLAB, LabVIEW). Benefits: 5.5 weeks holiday with a Buy & Sell holiday scheme. Competitive pension scheme. Cycle to work scheme. Death in service benefit. An opportunity for personal development and promotion. Occupational Health/Annual Medicals.
Radar Engineer - Algorithm Development Salary: £40,000 to £80,000 Dependent on experience We are currently seeking a skilled and experienced Radar Engineer to join the team at a leading defence engineering consultancy. You will have a strong background in algorithm development, with proficiency in MATLAB and Python. As a Radar Engineer, you will be responsible for designing, developing, and testing radar systems and algorithms for a range of applications. You will work closely with our multidisciplinary team of engineers to deliver innovative solutions to complex problems. Please note - Security clearance will be required for this role. Location: Greater Southampton area. Work Pattern: Flexible/Hybrid (A combination of home and office working) Key Responsibilities: Design, develop, and test radar algorithms using MATLAB and Python Collaborate with cross-functional teams to integrate algorithms into radar systems Conduct research to identify new radar technologies and techniques Analyze system performance and recommend improvements Prepare technical reports and presentations for clients and stakeholders Stay up-to-date with the latest developments in radar engineering and related fields Essential Skills and Experience: Degree in Electrical Engineering, Physics, or a related field Proven experience in algorithm development for radar systems Strong proficiency in MATLAB and Python Experience with radar system design and analysis Excellent problem-solving skills and attention to detail Strong communication and teamwork skills Desirable Skills and Experience: Experience with other programming languages such as C++ or Java Familiarity with machine learning and artificial intelligence techniques Experience with simulation tools such as Simulink or Xilinx System Generator Knowledge of radar signal processing techniques Benefits: This blue chip employer offers a supportive and cooperative work environment, where you will have the opportunity to work on exciting and challenging projects. Benefits include: Hybrid working pattern (a combination of home and office working) Competitive salary and benefits package Comprehensive training and development opportunities Access to cutting-edge technology and resources Opportunities to work with leading experts in the field If you are a motivated and experienced Radar Engineer looking for a new challenge, we would love to hear from you.
24/04/2024
Full time
Radar Engineer - Algorithm Development Salary: £40,000 to £80,000 Dependent on experience We are currently seeking a skilled and experienced Radar Engineer to join the team at a leading defence engineering consultancy. You will have a strong background in algorithm development, with proficiency in MATLAB and Python. As a Radar Engineer, you will be responsible for designing, developing, and testing radar systems and algorithms for a range of applications. You will work closely with our multidisciplinary team of engineers to deliver innovative solutions to complex problems. Please note - Security clearance will be required for this role. Location: Greater Southampton area. Work Pattern: Flexible/Hybrid (A combination of home and office working) Key Responsibilities: Design, develop, and test radar algorithms using MATLAB and Python Collaborate with cross-functional teams to integrate algorithms into radar systems Conduct research to identify new radar technologies and techniques Analyze system performance and recommend improvements Prepare technical reports and presentations for clients and stakeholders Stay up-to-date with the latest developments in radar engineering and related fields Essential Skills and Experience: Degree in Electrical Engineering, Physics, or a related field Proven experience in algorithm development for radar systems Strong proficiency in MATLAB and Python Experience with radar system design and analysis Excellent problem-solving skills and attention to detail Strong communication and teamwork skills Desirable Skills and Experience: Experience with other programming languages such as C++ or Java Familiarity with machine learning and artificial intelligence techniques Experience with simulation tools such as Simulink or Xilinx System Generator Knowledge of radar signal processing techniques Benefits: This blue chip employer offers a supportive and cooperative work environment, where you will have the opportunity to work on exciting and challenging projects. Benefits include: Hybrid working pattern (a combination of home and office working) Competitive salary and benefits package Comprehensive training and development opportunities Access to cutting-edge technology and resources Opportunities to work with leading experts in the field If you are a motivated and experienced Radar Engineer looking for a new challenge, we would love to hear from you.
FIELD SERVICE ENGINEER Covering UK&IRE £40,000 - £50,000 + Excellent benefits Monday - Friday - door to door (44 hours) One of the UK's leading suppliers of highly complex process sterilisation and quality process equipment is now recruiting for a Field Service Engineer to join their busy and expanding field service engineering team to cover UK&IRE. As the field service engineer, you will be required to travel to customer sites in the pharmaceutical and life-sciences field, carrying out repair and maintenance on a diverse range of technologies including autoclaves/sterilisers, RO systems, steam generators etc. Key responsibilities as the Field Service Engineer: You will be required to travel across the UK and Ireland and will include nights away from home. Provide preventative maintenance, calibration and technical support, to a standard consistent with the high quality of the equipment and services the organisation supply and with the reasonable expectations of the customers. Undertake fault finding/rectification assignments as delegated by the management team Creating, preparing and managing servicing and calibration documentation as delegated by the management team Managing specific service spares Role specific administration such as reporting, expenses, and time sheets Proper management of the organisations equipment, including test equipment, computer equipment etc. Support the training of other Field Service Engineers Provide FAT support as required. Additional administrative duties as required, including but not limited to, protocol review, document creation as per QMS. Adhering to policies and procedures at all times Experience required - Field Service Engineer: ONC/HNC or equivalent in engineering (mechanical, electrical, electronic etc.) Multi-skilled engineer who has carried out service, repair and maintenance on industrial sized electro-mechanical machinery Industry background could be; FMCG, Ex-Military (Navy, REME, RAF etc.), Automation, Robotics, Pharmaceutical, Biotechnology, Semi-Conductor, Oil & Gas etc. Flexible to travel and stay away as and when required as a field service engineer Valid, UK driving licence Package/benefits: £40,000 - £50,000 depending on experience Company performance bonus Paid overtime x1.5 - Monday Friday any hours over 44 hrs (door to door travel) Overnight stay allowance - £20 for first night away raising an extra £10 per night for consecutive nights (Capped at £110/night). Once fully out on your own - Night 1-4 -£62 p/n, nights 5-7 - £80 p/n, nights 8 onwards is £100p/n. Lunch allowance Company vehicle included for personal use or the option for business use only Company Pension scheme 25 dyas holiday + bank Company phone & laptop Tools and uniform supplied Annual salary reviews (linked to inflation) plus continuously review salary in relation to performance. If you are and experienced multi-skilled field service engineer interested in making an application, please click APPLY NOW and a CBSbutler representative will be in touch to discuss this exciting opportunity.
24/04/2024
Full time
FIELD SERVICE ENGINEER Covering UK&IRE £40,000 - £50,000 + Excellent benefits Monday - Friday - door to door (44 hours) One of the UK's leading suppliers of highly complex process sterilisation and quality process equipment is now recruiting for a Field Service Engineer to join their busy and expanding field service engineering team to cover UK&IRE. As the field service engineer, you will be required to travel to customer sites in the pharmaceutical and life-sciences field, carrying out repair and maintenance on a diverse range of technologies including autoclaves/sterilisers, RO systems, steam generators etc. Key responsibilities as the Field Service Engineer: You will be required to travel across the UK and Ireland and will include nights away from home. Provide preventative maintenance, calibration and technical support, to a standard consistent with the high quality of the equipment and services the organisation supply and with the reasonable expectations of the customers. Undertake fault finding/rectification assignments as delegated by the management team Creating, preparing and managing servicing and calibration documentation as delegated by the management team Managing specific service spares Role specific administration such as reporting, expenses, and time sheets Proper management of the organisations equipment, including test equipment, computer equipment etc. Support the training of other Field Service Engineers Provide FAT support as required. Additional administrative duties as required, including but not limited to, protocol review, document creation as per QMS. Adhering to policies and procedures at all times Experience required - Field Service Engineer: ONC/HNC or equivalent in engineering (mechanical, electrical, electronic etc.) Multi-skilled engineer who has carried out service, repair and maintenance on industrial sized electro-mechanical machinery Industry background could be; FMCG, Ex-Military (Navy, REME, RAF etc.), Automation, Robotics, Pharmaceutical, Biotechnology, Semi-Conductor, Oil & Gas etc. Flexible to travel and stay away as and when required as a field service engineer Valid, UK driving licence Package/benefits: £40,000 - £50,000 depending on experience Company performance bonus Paid overtime x1.5 - Monday Friday any hours over 44 hrs (door to door travel) Overnight stay allowance - £20 for first night away raising an extra £10 per night for consecutive nights (Capped at £110/night). Once fully out on your own - Night 1-4 -£62 p/n, nights 5-7 - £80 p/n, nights 8 onwards is £100p/n. Lunch allowance Company vehicle included for personal use or the option for business use only Company Pension scheme 25 dyas holiday + bank Company phone & laptop Tools and uniform supplied Annual salary reviews (linked to inflation) plus continuously review salary in relation to performance. If you are and experienced multi-skilled field service engineer interested in making an application, please click APPLY NOW and a CBSbutler representative will be in touch to discuss this exciting opportunity.
Digital IC Design Engineer | Contract | Cambridge | Up to £70ph DOE | Outside IR35 | Hybrid Are you looking for a new opportunity within the Digital IC Design space? Are you looking to offer your expertise to help scale a growing team? Are you looking to join a fast-growing company working on industry leading technologies in Smartphones, AR/VR & Wearables? Then this might just be the role for you. We are working with an industry leading electronics company that operate in the precision motion solutions space with their work being applied in the Smartphone, AR/VR and Wearables sectors. They are looking to bring in a selection of IC Design Engineers with a digital bias to deliver industry leading IC RTL Design and technical mentoring to a highly skilled, close-knit team. Key Responsibilities: Digital design development for custom IC Integration including the writing of IP design specifications, coding Verilog and SystemVerilog models for simulation, synthesis and static timing analysis and writing automated simulation and verification build scripts. Building automated pre-silicon verification environment whilst supporting early development of Embedded firmware throughout start of project. Integrate and partition in-house designs and IP from third parties and wrap with modelling logic to represent mixed signal design element. Asist with the validation of new silicon chips with a mix between CI/CD automation and manual tests through electrical test equipment. Qualifications and Experience: Strong experience in digital custom IC design. Strong experience in digital IC verification (UVM, SVA, VIP, and UPF), for ASIC implementation. Strong RTL coding with Verilog and System Verilog. Strong knowledge of interface technology (I2C, SPI, UART, SWD, JTAG, etc). Strong knowledge of on-chip bus protocol (AMBA AHB, APB, AXI-Stream, etc). Experience with Linux OS, revision control (Git) and Scripting languages (Bash, Tcl, and Python). Experience with EDA tools for simulation (Siemens Quest), Synthesis (DesignCompiler). Pay rate: Up to £70 ph D.O.E outside IR35
23/04/2024
Project-based
Digital IC Design Engineer | Contract | Cambridge | Up to £70ph DOE | Outside IR35 | Hybrid Are you looking for a new opportunity within the Digital IC Design space? Are you looking to offer your expertise to help scale a growing team? Are you looking to join a fast-growing company working on industry leading technologies in Smartphones, AR/VR & Wearables? Then this might just be the role for you. We are working with an industry leading electronics company that operate in the precision motion solutions space with their work being applied in the Smartphone, AR/VR and Wearables sectors. They are looking to bring in a selection of IC Design Engineers with a digital bias to deliver industry leading IC RTL Design and technical mentoring to a highly skilled, close-knit team. Key Responsibilities: Digital design development for custom IC Integration including the writing of IP design specifications, coding Verilog and SystemVerilog models for simulation, synthesis and static timing analysis and writing automated simulation and verification build scripts. Building automated pre-silicon verification environment whilst supporting early development of Embedded firmware throughout start of project. Integrate and partition in-house designs and IP from third parties and wrap with modelling logic to represent mixed signal design element. Asist with the validation of new silicon chips with a mix between CI/CD automation and manual tests through electrical test equipment. Qualifications and Experience: Strong experience in digital custom IC design. Strong experience in digital IC verification (UVM, SVA, VIP, and UPF), for ASIC implementation. Strong RTL coding with Verilog and System Verilog. Strong knowledge of interface technology (I2C, SPI, UART, SWD, JTAG, etc). Strong knowledge of on-chip bus protocol (AMBA AHB, APB, AXI-Stream, etc). Experience with Linux OS, revision control (Git) and Scripting languages (Bash, Tcl, and Python). Experience with EDA tools for simulation (Siemens Quest), Synthesis (DesignCompiler). Pay rate: Up to £70 ph D.O.E outside IR35
We are currently looking on behalf of one of our important clients for an Application Engineer for Computational Electromagnetics (CEM). The role is a permanent position based in Zürich. Your Role: Support a development team during all software release activities (eg, testing of software, writing of application notes & manuals & training sessions). Provide technical support for global users. Collect feedback from users & partners & collaborate with research & development teams to improve a simulation platform. Develop showcases for various applications that demonstrate the features & capabilities of a simulation platform. Carry out technical presentations at seminars & workshops. Participation in scientific conferences & exhibitions. Research & observe market trends & competitor products. Your Skills & Experience: From 2 to 7 years of professional experience as an Application Engineer (or similar) OR a PhD Graduate with acquired associated skills. A Knowledge of & practical experience in the areas of Computational Modelling & Simulation, Computational Electromagnetics (CEM) & EM simulation software (eg, COMSOL, ANSYS) OR in Medical Device Engineering. A solid background in & understanding of Electromagnetic (EM) Theory. Any additional experience in the areas of Antenna Design, Software Development, Scripting or Web Applications is considered a plus. A good understanding of Software Development Processes. Ideally experienced in FDTD simulation tools such as CST. Your Profile: University Degree in Electrical Engineering or Physics Motivated to take on responsibilities & highly quality & team-oriented. Collaborative, good communication skills & sensitive to customer needs. Fluent in English (spoken & written), German language skills are considered a plus.
23/04/2024
Full time
We are currently looking on behalf of one of our important clients for an Application Engineer for Computational Electromagnetics (CEM). The role is a permanent position based in Zürich. Your Role: Support a development team during all software release activities (eg, testing of software, writing of application notes & manuals & training sessions). Provide technical support for global users. Collect feedback from users & partners & collaborate with research & development teams to improve a simulation platform. Develop showcases for various applications that demonstrate the features & capabilities of a simulation platform. Carry out technical presentations at seminars & workshops. Participation in scientific conferences & exhibitions. Research & observe market trends & competitor products. Your Skills & Experience: From 2 to 7 years of professional experience as an Application Engineer (or similar) OR a PhD Graduate with acquired associated skills. A Knowledge of & practical experience in the areas of Computational Modelling & Simulation, Computational Electromagnetics (CEM) & EM simulation software (eg, COMSOL, ANSYS) OR in Medical Device Engineering. A solid background in & understanding of Electromagnetic (EM) Theory. Any additional experience in the areas of Antenna Design, Software Development, Scripting or Web Applications is considered a plus. A good understanding of Software Development Processes. Ideally experienced in FDTD simulation tools such as CST. Your Profile: University Degree in Electrical Engineering or Physics Motivated to take on responsibilities & highly quality & team-oriented. Collaborative, good communication skills & sensitive to customer needs. Fluent in English (spoken & written), German language skills are considered a plus.