We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
29/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
Overview: Our client is creating high performance precision machines able to print and label at high speed onto consumer goods. The Senior Software Engineer will be joining a global leader in product identification, that provides innovative coding and marking solutions that helps customers ensure product safety and improve their productivity. The successful Senior Software Engineer will be able to interpret customer specifications and provide technical solutions to engineering problems. Key responsibilities for the Senior Software Engineer: Analyse customer specifications and offer technical resolutions to engineering challenges. The Senior Software Engineer will devise designs and technical strategies for emerging technologies within the R&D Technology division. Develop, deploy, and sustain C++ software for both new and existing products. The Senior Software Engineer will work closely with electronic, mechanical, and fellow software engineers, overseeing technical reviews, conducting feasibility studies, and participating in project evaluations as needed. Key skills for the Senior Software Engineer: Proficiency in C++, particularly for Microprocessor (Embedded) applications. Substantial experience in software development for Windows, WinCE, or Real Time operating systems (RTOS). Understanding of Real Time and concurrent principles, with an awareness of networked devices, distributed processes, and packet-based protocols. Preferably, experience in electronics control and interfacing with motors, sensors, etc. Familiarity with Linux operating systems is advantageous.
29/04/2024
Full time
Overview: Our client is creating high performance precision machines able to print and label at high speed onto consumer goods. The Senior Software Engineer will be joining a global leader in product identification, that provides innovative coding and marking solutions that helps customers ensure product safety and improve their productivity. The successful Senior Software Engineer will be able to interpret customer specifications and provide technical solutions to engineering problems. Key responsibilities for the Senior Software Engineer: Analyse customer specifications and offer technical resolutions to engineering challenges. The Senior Software Engineer will devise designs and technical strategies for emerging technologies within the R&D Technology division. Develop, deploy, and sustain C++ software for both new and existing products. The Senior Software Engineer will work closely with electronic, mechanical, and fellow software engineers, overseeing technical reviews, conducting feasibility studies, and participating in project evaluations as needed. Key skills for the Senior Software Engineer: Proficiency in C++, particularly for Microprocessor (Embedded) applications. Substantial experience in software development for Windows, WinCE, or Real Time operating systems (RTOS). Understanding of Real Time and concurrent principles, with an awareness of networked devices, distributed processes, and packet-based protocols. Preferably, experience in electronics control and interfacing with motors, sensors, etc. Familiarity with Linux operating systems is advantageous.
Mechanical Engineer/Aerospace Engineer - Aerospace Testing Equipment, Wind Tunnels, Force Measurement & Positioning Systems; Bespoke Mechanical Engineering, Design, Hands-on Assembly, Installation; FEA, CAE from: Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc. Permanent, East Sussex, Onsite. C.£60k + Bonus. Specialist Engineering firm with 30 year trading history and a leading position within the Wind Tunnel/Airflow Testing Solutions marketplace seek Mechanical Engineer to join the business and play a lead role within the team. With the majority of their clients operating within the Aerospace, Motorsport and Defence sectors the company delivers bespoke engineering solutions to clients across the globe. A wide range of wind/air flow testing solutions are offered within their product range with each actual delivery being bespoke in nature. The Mechanical Engineer/Aerospace Engineer will work in a lead capacity and within the full life cycle. This will require the design of the solution using 3D CAE tools such as Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc, liaison with the fabricators and then the subsequent (hands-on) build and assembly of the systems either in the company's factory environment and/or onsite anywhere in the world. You will plan complex engineering projects, design solutions/oversee solutions designed by the team, play a key role in the assembly and installation but also solve problems as they arise and advise on appropriate methods and solutions to improve the end product. This will require both leadership of the team, engagement with senior management, project management capability as well as engagement with customers within some of the worlds' leading organisations within the Aerospace, Automotive, Motorsport and Defence sectors. We are searching for an experienced Mechanical Engineer/Aerospace Engineer who possesses many years' experience in the full life cycle of aeronautical/motion control/electromechanical engineering fields where you will have gained experience in in 2D and 3D CAE with either Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc. You will be a hands-on Engineer with experience of machined components to tight tolerances; large, welded fabrications. You will be comfortable with the concepts of FEA (Finite Element Analysis). Leadership, Project Management, Client Engagement and an overall keen eye for detail will all be expected and in return you will have the opportunity to deliver first class systems for some of the world's leading companies. Excellent communication skills will be required. SC clearance required/to be undertaken on appointment. This is an exceptional opportunity to join a well-established, leading specialist engineering company with exciting global prospects. Due to the hands-on nature of this role we require someone who can work Full Time, onsite at the company's facility in rural East Sussex. You will need to be in possession of a full driving license and car as the offices and assembly centre are not within walking distance of the mainline train station. The location is easily commutable (by car) from areas including Eastbourne, Hailsham, Hastings, Uckfield East Sussex; Tunbridge Wells, Sevenoaks, Kent; East Grinstead, Crawley West Sussex; Horley, Redhill, Surrey.
29/04/2024
Full time
Mechanical Engineer/Aerospace Engineer - Aerospace Testing Equipment, Wind Tunnels, Force Measurement & Positioning Systems; Bespoke Mechanical Engineering, Design, Hands-on Assembly, Installation; FEA, CAE from: Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc. Permanent, East Sussex, Onsite. C.£60k + Bonus. Specialist Engineering firm with 30 year trading history and a leading position within the Wind Tunnel/Airflow Testing Solutions marketplace seek Mechanical Engineer to join the business and play a lead role within the team. With the majority of their clients operating within the Aerospace, Motorsport and Defence sectors the company delivers bespoke engineering solutions to clients across the globe. A wide range of wind/air flow testing solutions are offered within their product range with each actual delivery being bespoke in nature. The Mechanical Engineer/Aerospace Engineer will work in a lead capacity and within the full life cycle. This will require the design of the solution using 3D CAE tools such as Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc, liaison with the fabricators and then the subsequent (hands-on) build and assembly of the systems either in the company's factory environment and/or onsite anywhere in the world. You will plan complex engineering projects, design solutions/oversee solutions designed by the team, play a key role in the assembly and installation but also solve problems as they arise and advise on appropriate methods and solutions to improve the end product. This will require both leadership of the team, engagement with senior management, project management capability as well as engagement with customers within some of the worlds' leading organisations within the Aerospace, Automotive, Motorsport and Defence sectors. We are searching for an experienced Mechanical Engineer/Aerospace Engineer who possesses many years' experience in the full life cycle of aeronautical/motion control/electromechanical engineering fields where you will have gained experience in in 2D and 3D CAE with either Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc. You will be a hands-on Engineer with experience of machined components to tight tolerances; large, welded fabrications. You will be comfortable with the concepts of FEA (Finite Element Analysis). Leadership, Project Management, Client Engagement and an overall keen eye for detail will all be expected and in return you will have the opportunity to deliver first class systems for some of the world's leading companies. Excellent communication skills will be required. SC clearance required/to be undertaken on appointment. This is an exceptional opportunity to join a well-established, leading specialist engineering company with exciting global prospects. Due to the hands-on nature of this role we require someone who can work Full Time, onsite at the company's facility in rural East Sussex. You will need to be in possession of a full driving license and car as the offices and assembly centre are not within walking distance of the mainline train station. The location is easily commutable (by car) from areas including Eastbourne, Hailsham, Hastings, Uckfield East Sussex; Tunbridge Wells, Sevenoaks, Kent; East Grinstead, Crawley West Sussex; Horley, Redhill, Surrey.
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
29/04/2024
Project-based
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
Electrical Design Engineer Location: Derby Salary: £40,000 to £55,000 plus bonus & benefits Are you an Electrical Design Engineer who enjoys the cut and thrust of working on a varied landscape? Have you worked in regulated industries? I am working with a well-regarded consultancy who have over 25 years in industry, working with the likes of Dyson, Rolls Royce and similar corporations. This role with give an Electrical Design Engineer the opportunity to not only work on specific Electrical design but be exposed to a multidisciplinary Design Team seeing all mechanical and electronic elements to the projects. They boast a strong order book and this role is an expansion to the Design Team, if you have 3 years or more in industry, we want to hear from you. In this role you will be involved from the start of the project right through to inception, working closely with production and testing. What our client needs: Educated to HNC/HND or Degree in Electrical Engineering Experience within industry of over 3 years in Electrical Design Worked ideally in a consultancy or able to demonstrate multi-project experience Solidworks Electrical or E Plan design packages used PLC knowledge is a bonus and not essential What's in it for you? An opportunity to work with a plethora of household names in Automotive, Aerospace, Consumer Product and many more Flexible Start and Finish times Private Medical Cover Competitive Salary and Company Pension Contributions Please apply with an up to date CV or contact me
26/04/2024
Full time
Electrical Design Engineer Location: Derby Salary: £40,000 to £55,000 plus bonus & benefits Are you an Electrical Design Engineer who enjoys the cut and thrust of working on a varied landscape? Have you worked in regulated industries? I am working with a well-regarded consultancy who have over 25 years in industry, working with the likes of Dyson, Rolls Royce and similar corporations. This role with give an Electrical Design Engineer the opportunity to not only work on specific Electrical design but be exposed to a multidisciplinary Design Team seeing all mechanical and electronic elements to the projects. They boast a strong order book and this role is an expansion to the Design Team, if you have 3 years or more in industry, we want to hear from you. In this role you will be involved from the start of the project right through to inception, working closely with production and testing. What our client needs: Educated to HNC/HND or Degree in Electrical Engineering Experience within industry of over 3 years in Electrical Design Worked ideally in a consultancy or able to demonstrate multi-project experience Solidworks Electrical or E Plan design packages used PLC knowledge is a bonus and not essential What's in it for you? An opportunity to work with a plethora of household names in Automotive, Aerospace, Consumer Product and many more Flexible Start and Finish times Private Medical Cover Competitive Salary and Company Pension Contributions Please apply with an up to date CV or contact me
Job Title: Continuous Improvement Lead Industry: Medical Device Manufacturing Location: Plymouth Position Type: Permanent About The Company Join a pioneering team at a UK-based company specializing in advanced wound care and wound closure products. An organisation dedicated to developing and manufacturing world-leading solutions that enhance patient care. With a wealth of resources and specialized expertise, they offer a unique opportunity to be part of a team involved in every aspect of product design, development, and manufacture. Job Description Overview Responsible for all manufacturing processes, lean improvements, cost reduction, technical capability enhancement, process development, new production introduction delivering outputs in line with the business objectives on safety, quality, delivery, and cost. To execute site support activities and provide maintenance of all relevant operational equipment to ensure longevity and availability. Key Responsibilities Working closely alongside production operations to ensure the startup/shut down and continual running of all manufacturing processes. Establish & maintain standard processes within the validated process window plus optimisation of the technical performance for all manufacturing elements. Investigate and resolve issues related to the technical performance Optimize and deliver continuous improvement on existing manufacturing processes. Assist R&D with the introduction of new products and processes into manufacturing. Development of new standard processes and ensure optimal implementation into manufacturing supported with initial procedures, training and coaching of manufacturing. Collaborate with Group Engineering to execute or support assigned capital expenditure projects. Maintain all production equipment to the defined schedule and provide maintenance of the whole site requirements including, fire system testing/training, legionella checks, calibration, and contractor control. Qualifications Current experience in production environment support role (or 5 years min). Experience of developing and/or testing a process within a clean room manufacturing environment. Good understanding of Lean Principles (5S/VSM/Kaizen). Minimum of HNC level qualification in mechanical, electronic, industrial, or manufacturing engineering, or similar. Experience in process and product validation (sterile packaging according to ISO 11607 would be advantageous). Understanding of a quality management system (ISO13485/FDA) and medical device manufacturing advantageous. Very good MS Office skills, especially Excel. Strong organizational skills with the ability to communicate at all levels of the organization. Effective time management with the ability to set priorities. Good written and spoken English. Salary & Benefits Up to £45,000 per annum (Depending on Experience) Annual incentive bonus Life Cover Penson contribution up to 6% Dental Insurance Employee share scheme Other Information Exciting opportunity to lead a transformative project with significant organizational impact. Competitive salary package commensurate with experience. Opportunity to work with a dynamic and collaborative team focused on driving continuous improvement and excellence. How to Apply Apply now by submitting your CV below, alternatively you can send your CV. Please include "Continuous Improvement Lead" in the subject line
25/04/2024
Full time
Job Title: Continuous Improvement Lead Industry: Medical Device Manufacturing Location: Plymouth Position Type: Permanent About The Company Join a pioneering team at a UK-based company specializing in advanced wound care and wound closure products. An organisation dedicated to developing and manufacturing world-leading solutions that enhance patient care. With a wealth of resources and specialized expertise, they offer a unique opportunity to be part of a team involved in every aspect of product design, development, and manufacture. Job Description Overview Responsible for all manufacturing processes, lean improvements, cost reduction, technical capability enhancement, process development, new production introduction delivering outputs in line with the business objectives on safety, quality, delivery, and cost. To execute site support activities and provide maintenance of all relevant operational equipment to ensure longevity and availability. Key Responsibilities Working closely alongside production operations to ensure the startup/shut down and continual running of all manufacturing processes. Establish & maintain standard processes within the validated process window plus optimisation of the technical performance for all manufacturing elements. Investigate and resolve issues related to the technical performance Optimize and deliver continuous improvement on existing manufacturing processes. Assist R&D with the introduction of new products and processes into manufacturing. Development of new standard processes and ensure optimal implementation into manufacturing supported with initial procedures, training and coaching of manufacturing. Collaborate with Group Engineering to execute or support assigned capital expenditure projects. Maintain all production equipment to the defined schedule and provide maintenance of the whole site requirements including, fire system testing/training, legionella checks, calibration, and contractor control. Qualifications Current experience in production environment support role (or 5 years min). Experience of developing and/or testing a process within a clean room manufacturing environment. Good understanding of Lean Principles (5S/VSM/Kaizen). Minimum of HNC level qualification in mechanical, electronic, industrial, or manufacturing engineering, or similar. Experience in process and product validation (sterile packaging according to ISO 11607 would be advantageous). Understanding of a quality management system (ISO13485/FDA) and medical device manufacturing advantageous. Very good MS Office skills, especially Excel. Strong organizational skills with the ability to communicate at all levels of the organization. Effective time management with the ability to set priorities. Good written and spoken English. Salary & Benefits Up to £45,000 per annum (Depending on Experience) Annual incentive bonus Life Cover Penson contribution up to 6% Dental Insurance Employee share scheme Other Information Exciting opportunity to lead a transformative project with significant organizational impact. Competitive salary package commensurate with experience. Opportunity to work with a dynamic and collaborative team focused on driving continuous improvement and excellence. How to Apply Apply now by submitting your CV below, alternatively you can send your CV. Please include "Continuous Improvement Lead" in the subject line
Senior Security Systems Design Engineer I am looking to hire an experienced (3-5 Years) Senior Security Systems Design Engineer on behalf of a prestigious client of mine, on a permanent basis. Our clients are looking for a motivated individual who will have experience of, and the continued desire to, see their designs through from Design to Construction, Commissioning and handover etc. Candidates wishing to apply for this position will be heavily experienced in the Technical Design Space (Electrical and Mechanical Requirements) and have the capabilities, of successfully grasping the fundamentals of a new development ie Hotel, Stadium, Airport - It goes without saying, it is imperative that the successful candidate has Practical experience! To be considered for this position you will be well versed with the RIBA process and the following Softwares ; AutoCAD, REVIT, Bluebeam Revu . You will be responsible for and able to demonstrate (not limited to), Project Planning, client briefing, developing design, task quality control procedures, resource planning and working within budgets. It is essential that you will have previously designed some or all of the following; Video Surveillance, Access Control, Intruder detection, Duress, Intercom, Control Rooms, Integrated Security Management Platforms, Gates/Barriers, Turnstiles, Car Parking Management, Key Management or Drone detection and will have previously monitored both on and off-site construction works and testing of electronic security systems. You will be a sleeves-rolled-up individual, with excellent attention to detail, who is able to deliver in various Architectural Projects. Salary: Up to £67,000 per annum Location: On site in London 3 days a week, the remainder working remotely. (Probation period fully on site)
25/04/2024
Full time
Senior Security Systems Design Engineer I am looking to hire an experienced (3-5 Years) Senior Security Systems Design Engineer on behalf of a prestigious client of mine, on a permanent basis. Our clients are looking for a motivated individual who will have experience of, and the continued desire to, see their designs through from Design to Construction, Commissioning and handover etc. Candidates wishing to apply for this position will be heavily experienced in the Technical Design Space (Electrical and Mechanical Requirements) and have the capabilities, of successfully grasping the fundamentals of a new development ie Hotel, Stadium, Airport - It goes without saying, it is imperative that the successful candidate has Practical experience! To be considered for this position you will be well versed with the RIBA process and the following Softwares ; AutoCAD, REVIT, Bluebeam Revu . You will be responsible for and able to demonstrate (not limited to), Project Planning, client briefing, developing design, task quality control procedures, resource planning and working within budgets. It is essential that you will have previously designed some or all of the following; Video Surveillance, Access Control, Intruder detection, Duress, Intercom, Control Rooms, Integrated Security Management Platforms, Gates/Barriers, Turnstiles, Car Parking Management, Key Management or Drone detection and will have previously monitored both on and off-site construction works and testing of electronic security systems. You will be a sleeves-rolled-up individual, with excellent attention to detail, who is able to deliver in various Architectural Projects. Salary: Up to £67,000 per annum Location: On site in London 3 days a week, the remainder working remotely. (Probation period fully on site)
Infoplus Technologies UK Ltd
Peterborough, Cambridgeshire
Role: Through this role, the successful candidate will have an excellent opportunity be involved in the design and development of controls and software for advanced diesel engine controls and/or hybrid systems controls. Responsibilities: Work with process partner teams (primarily Industrial Power Systems Division) to gather and develop requirements for the advanced diesel engines and hybrid power systems being developed for future, more sustainable, low carbon power systems. Create control algorithms/software models using Matlab, Simulink and Stateflow to meet diesel engine and/or hybrid power system software requirements. Conduct control system tuning/calibration activities on test bench and/or on test bed/machine to achieve desired system performance. Conduct sub-system FMEAs, documenting potential failure modes, identifying, and completing design and validation actions and managing subsequent updates. Plan and execute verification and validation testing for electronics/control system software in SiL, HiL or on-test bed or development machines. Troubleshoot and resolve electronics/control system issues encountered during engine or power system running. Competencies: Essential: Strong technical background (HNC or technical degree preferred in mechanical or electronic, electrical, control systems or automotive engineering) with 10+ Years of experience. Essential experience is working previously with Diesel Engines and having the Diesel Engine knowledge. Matlab, Simulink and Stateflow experience is essential, must've used it to create Control Algorithms. Significant, demonstrable experience of using Mathworks tools (Matlab, Simulink and Stateflow) for model-based software design and development to create Embedded software. This should have been gained in a diesel engine or hybrid power systems development environment. Ability to translate and develop customer requirements and objectives into production-ready software models. Knowledge of software FMEA and validation plan creation. Excellent communications skills & Teamwork Desirable: Good understanding of the off-highway industry, ideally gained through direct involvement in the development of powertrain, hydraulics, or other control systems. Experience of Caterpillar control software processes and tools. Experience of HiL test equipment and the ability to programme automated tests. Knowledge of software version control systems, ideally GiT or Clearcase. Knowledge of/prior experience of developing software to meet functional safety requirements.
25/04/2024
Role: Through this role, the successful candidate will have an excellent opportunity be involved in the design and development of controls and software for advanced diesel engine controls and/or hybrid systems controls. Responsibilities: Work with process partner teams (primarily Industrial Power Systems Division) to gather and develop requirements for the advanced diesel engines and hybrid power systems being developed for future, more sustainable, low carbon power systems. Create control algorithms/software models using Matlab, Simulink and Stateflow to meet diesel engine and/or hybrid power system software requirements. Conduct control system tuning/calibration activities on test bench and/or on test bed/machine to achieve desired system performance. Conduct sub-system FMEAs, documenting potential failure modes, identifying, and completing design and validation actions and managing subsequent updates. Plan and execute verification and validation testing for electronics/control system software in SiL, HiL or on-test bed or development machines. Troubleshoot and resolve electronics/control system issues encountered during engine or power system running. Competencies: Essential: Strong technical background (HNC or technical degree preferred in mechanical or electronic, electrical, control systems or automotive engineering) with 10+ Years of experience. Essential experience is working previously with Diesel Engines and having the Diesel Engine knowledge. Matlab, Simulink and Stateflow experience is essential, must've used it to create Control Algorithms. Significant, demonstrable experience of using Mathworks tools (Matlab, Simulink and Stateflow) for model-based software design and development to create Embedded software. This should have been gained in a diesel engine or hybrid power systems development environment. Ability to translate and develop customer requirements and objectives into production-ready software models. Knowledge of software FMEA and validation plan creation. Excellent communications skills & Teamwork Desirable: Good understanding of the off-highway industry, ideally gained through direct involvement in the development of powertrain, hydraulics, or other control systems. Experience of Caterpillar control software processes and tools. Experience of HiL test equipment and the ability to programme automated tests. Knowledge of software version control systems, ideally GiT or Clearcase. Knowledge of/prior experience of developing software to meet functional safety requirements.
FIELD SERVICE ENGINEER Covering UK&IRE £40,000 - £50,000 + Excellent benefits Monday - Friday - door to door (44 hours) One of the UK's leading suppliers of highly complex process sterilisation and quality process equipment is now recruiting for a Field Service Engineer to join their busy and expanding field service engineering team to cover UK&IRE. As the field service engineer, you will be required to travel to customer sites in the pharmaceutical and life-sciences field, carrying out repair and maintenance on a diverse range of technologies including autoclaves/sterilisers, RO systems, steam generators etc. Key responsibilities as the Field Service Engineer: You will be required to travel across the UK and Ireland and will include nights away from home. Provide preventative maintenance, calibration and technical support, to a standard consistent with the high quality of the equipment and services the organisation supply and with the reasonable expectations of the customers. Undertake fault finding/rectification assignments as delegated by the management team Creating, preparing and managing servicing and calibration documentation as delegated by the management team Managing specific service spares Role specific administration such as reporting, expenses, and time sheets Proper management of the organisations equipment, including test equipment, computer equipment etc. Support the training of other Field Service Engineers Provide FAT support as required. Additional administrative duties as required, including but not limited to, protocol review, document creation as per QMS. Adhering to policies and procedures at all times Experience required - Field Service Engineer: ONC/HNC or equivalent in engineering (mechanical, electrical, electronic etc.) Multi-skilled engineer who has carried out service, repair and maintenance on industrial sized electro-mechanical machinery Industry background could be; FMCG, Ex-Military (Navy, REME, RAF etc.), Automation, Robotics, Pharmaceutical, Biotechnology, Semi-Conductor, Oil & Gas etc. Flexible to travel and stay away as and when required as a field service engineer Valid, UK driving licence Package/benefits: £40,000 - £50,000 depending on experience Company performance bonus Paid overtime x1.5 - Monday Friday any hours over 44 hrs (door to door travel) Overnight stay allowance - £20 for first night away raising an extra £10 per night for consecutive nights (Capped at £110/night). Once fully out on your own - Night 1-4 -£62 p/n, nights 5-7 - £80 p/n, nights 8 onwards is £100p/n. Lunch allowance Company vehicle included for personal use or the option for business use only Company Pension scheme 25 dyas holiday + bank Company phone & laptop Tools and uniform supplied Annual salary reviews (linked to inflation) plus continuously review salary in relation to performance. If you are and experienced multi-skilled field service engineer interested in making an application, please click APPLY NOW and a CBSbutler representative will be in touch to discuss this exciting opportunity.
24/04/2024
Full time
FIELD SERVICE ENGINEER Covering UK&IRE £40,000 - £50,000 + Excellent benefits Monday - Friday - door to door (44 hours) One of the UK's leading suppliers of highly complex process sterilisation and quality process equipment is now recruiting for a Field Service Engineer to join their busy and expanding field service engineering team to cover UK&IRE. As the field service engineer, you will be required to travel to customer sites in the pharmaceutical and life-sciences field, carrying out repair and maintenance on a diverse range of technologies including autoclaves/sterilisers, RO systems, steam generators etc. Key responsibilities as the Field Service Engineer: You will be required to travel across the UK and Ireland and will include nights away from home. Provide preventative maintenance, calibration and technical support, to a standard consistent with the high quality of the equipment and services the organisation supply and with the reasonable expectations of the customers. Undertake fault finding/rectification assignments as delegated by the management team Creating, preparing and managing servicing and calibration documentation as delegated by the management team Managing specific service spares Role specific administration such as reporting, expenses, and time sheets Proper management of the organisations equipment, including test equipment, computer equipment etc. Support the training of other Field Service Engineers Provide FAT support as required. Additional administrative duties as required, including but not limited to, protocol review, document creation as per QMS. Adhering to policies and procedures at all times Experience required - Field Service Engineer: ONC/HNC or equivalent in engineering (mechanical, electrical, electronic etc.) Multi-skilled engineer who has carried out service, repair and maintenance on industrial sized electro-mechanical machinery Industry background could be; FMCG, Ex-Military (Navy, REME, RAF etc.), Automation, Robotics, Pharmaceutical, Biotechnology, Semi-Conductor, Oil & Gas etc. Flexible to travel and stay away as and when required as a field service engineer Valid, UK driving licence Package/benefits: £40,000 - £50,000 depending on experience Company performance bonus Paid overtime x1.5 - Monday Friday any hours over 44 hrs (door to door travel) Overnight stay allowance - £20 for first night away raising an extra £10 per night for consecutive nights (Capped at £110/night). Once fully out on your own - Night 1-4 -£62 p/n, nights 5-7 - £80 p/n, nights 8 onwards is £100p/n. Lunch allowance Company vehicle included for personal use or the option for business use only Company Pension scheme 25 dyas holiday + bank Company phone & laptop Tools and uniform supplied Annual salary reviews (linked to inflation) plus continuously review salary in relation to performance. If you are and experienced multi-skilled field service engineer interested in making an application, please click APPLY NOW and a CBSbutler representative will be in touch to discuss this exciting opportunity.
Location: Cambridge We're seeking an experienced Lead Mechatronic Engineer to spearhead the development of our autonomous harvesting robot. In this role, you'll design, build, and test prototypes, ensuring the system's robustness and manufacturability for market readiness. Responsibilities: Lead the design and development of the robotic platform for precision harvesting. Integrate sensors, electronics, software, and electromechanical devices into cost-effective designs. Collaborate with cross-functional teams on system integration and manufacturing processes. Conduct field trials and validation at grower sites. Manage projects, partnerships, and suppliers to meet timelines and budgets. Present technical reports and updates to senior leadership. Oversee CAD and PDM infrastructure, providing training and support. Qualifications/Experience: Degree in Mechatronic Engineering or equivalent. 5+ years of product development experience in robotics or manufacturing. Expertise in SolidWorks, Altium, and the full product development life cycle. Proficient in 3D CAD modelling, tolerance analysis, and design for manufacturability. Ability to lead projects, interpret customer needs, and translate requirements. Skilled in managing multiple projects, deadlines, and priorities. Experience with design for manufacturing principles and FEA (preferred). Familiarity with robot arm actuators, end-effectors/grippers, and soft robotics. Strong problem-solving, analytical, and organizational skills. Excellent team player with the ability to work autonomously. Proficient in MS Office tools Job Types: Full-time, Permanent
23/04/2024
Full time
Location: Cambridge We're seeking an experienced Lead Mechatronic Engineer to spearhead the development of our autonomous harvesting robot. In this role, you'll design, build, and test prototypes, ensuring the system's robustness and manufacturability for market readiness. Responsibilities: Lead the design and development of the robotic platform for precision harvesting. Integrate sensors, electronics, software, and electromechanical devices into cost-effective designs. Collaborate with cross-functional teams on system integration and manufacturing processes. Conduct field trials and validation at grower sites. Manage projects, partnerships, and suppliers to meet timelines and budgets. Present technical reports and updates to senior leadership. Oversee CAD and PDM infrastructure, providing training and support. Qualifications/Experience: Degree in Mechatronic Engineering or equivalent. 5+ years of product development experience in robotics or manufacturing. Expertise in SolidWorks, Altium, and the full product development life cycle. Proficient in 3D CAD modelling, tolerance analysis, and design for manufacturability. Ability to lead projects, interpret customer needs, and translate requirements. Skilled in managing multiple projects, deadlines, and priorities. Experience with design for manufacturing principles and FEA (preferred). Familiarity with robot arm actuators, end-effectors/grippers, and soft robotics. Strong problem-solving, analytical, and organizational skills. Excellent team player with the ability to work autonomously. Proficient in MS Office tools Job Types: Full-time, Permanent
MP Recruitment Group
Sutton Courtenay, Oxfordshire
Main Purpose of Role: To be main point of contact to UK customers providing customer service, technical advice, and sales requirements to each customer s individual needs. To provide technical and commercial back-up to support external sales team Key Duties/Main Responsibilities: To help develop and grow sales to existing and new customers through offering technically sound and cost-effective drive solutions matching their needs. Dealing with telephone enquiries from customers. Based on information supplied by customer, select appropriate product. Prepare quotations and reports for customers as required. Use Business systems and procedures to maintain customer interaction history using CRM system. Support external sales team with technical and commercial support. Essential Skills A good telephone manner Capable of working in a close dynamic team Educated to ONC/HNC/Apprenticeship or equivalent experience in Mechanical or Electrical/Electronic Engineering Computer literate with Microsoft products, Outlook, Dynamics CRM, Excel, Word, PowerPoint Working use of SAP would be beneficial but not essential Technical sales experience would be beneficial. Full driving license and living 45 minutes commuting from Abingdon Training A training program will be put in place to cover both sales and product training; the program will be based on individual requirements. Performance Measures on Value of sales orders raised and On-time delivery to customers Use of CRM Software and internal business systems and procedures Benefits Bonus up to £3k per annum Holiday: starting on 22 days, rising by 1 day per completed year of service to a max of 25 days plus BH Hours : 8.30am 5pm Monday Thursday and Friday 8.30am 4pm (39 hour working week) 1 day per week WFH (only after passing 3 months probation) Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
23/04/2024
Full time
Main Purpose of Role: To be main point of contact to UK customers providing customer service, technical advice, and sales requirements to each customer s individual needs. To provide technical and commercial back-up to support external sales team Key Duties/Main Responsibilities: To help develop and grow sales to existing and new customers through offering technically sound and cost-effective drive solutions matching their needs. Dealing with telephone enquiries from customers. Based on information supplied by customer, select appropriate product. Prepare quotations and reports for customers as required. Use Business systems and procedures to maintain customer interaction history using CRM system. Support external sales team with technical and commercial support. Essential Skills A good telephone manner Capable of working in a close dynamic team Educated to ONC/HNC/Apprenticeship or equivalent experience in Mechanical or Electrical/Electronic Engineering Computer literate with Microsoft products, Outlook, Dynamics CRM, Excel, Word, PowerPoint Working use of SAP would be beneficial but not essential Technical sales experience would be beneficial. Full driving license and living 45 minutes commuting from Abingdon Training A training program will be put in place to cover both sales and product training; the program will be based on individual requirements. Performance Measures on Value of sales orders raised and On-time delivery to customers Use of CRM Software and internal business systems and procedures Benefits Bonus up to £3k per annum Holiday: starting on 22 days, rising by 1 day per completed year of service to a max of 25 days plus BH Hours : 8.30am 5pm Monday Thursday and Friday 8.30am 4pm (39 hour working week) 1 day per week WFH (only after passing 3 months probation) Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.