We are currently looking on behalf of one of our important clients for a Head of Laboratory Test Development & Validation (German Speaking). The role is a permanent position based in Bern Canton & comes with good home office allowance. Your Role: Oversee the personnel & technical management of a specialist group of 4 Engineers & 3 Laboratory Technicians. Develop & validate new physical measurement & testing methods. Provide technical support for Design Verification Laboratories. Hold responsibility for the operation & maintenance of a Development Laboratory. Plan, coordinate & execute measurement & testing orders in relation to Product Innovation & Product Development. Place, award & support contracts to external service providers if required. Your Skills: At least 5 years of relevant professional experience including experience within Development Laboratories. Skilled & experienced in Leading teams. Ideally experienced in Design Verification & the Medical Technology sector. Your Profile: Completed relevant Scientific or Technical University Degree. Communicative, strong leadership skills & solution-oriented. Fluent English & good German language skills (to at least B2 Level) are a mandatory requirement.
20/05/2024
Full time
We are currently looking on behalf of one of our important clients for a Head of Laboratory Test Development & Validation (German Speaking). The role is a permanent position based in Bern Canton & comes with good home office allowance. Your Role: Oversee the personnel & technical management of a specialist group of 4 Engineers & 3 Laboratory Technicians. Develop & validate new physical measurement & testing methods. Provide technical support for Design Verification Laboratories. Hold responsibility for the operation & maintenance of a Development Laboratory. Plan, coordinate & execute measurement & testing orders in relation to Product Innovation & Product Development. Place, award & support contracts to external service providers if required. Your Skills: At least 5 years of relevant professional experience including experience within Development Laboratories. Skilled & experienced in Leading teams. Ideally experienced in Design Verification & the Medical Technology sector. Your Profile: Completed relevant Scientific or Technical University Degree. Communicative, strong leadership skills & solution-oriented. Fluent English & good German language skills (to at least B2 Level) are a mandatory requirement.
Are you eager to be part of a global, growing organisation that is leading the way in developing renewable alternatives to fossil-based materials? Our client, an industry leader in the manufacturing sector, is looking for a talented Engineering Compliance Technician to join their team in Irvine. This is an exciting opportunity to contribute to the maintenance and development of their plant and equipment, ensuring the highest standards of accuracy and reliability. As an Engineering Compliance Technician, you will play a vital role in meeting all statutory and legislative engineering testing and inspections, including the Pressure Systems Safety Regulations 2000 (PSSR), Lifting Operations and Lifting Equipment Regulations (LOLER), and Hand-Arm Vibration Syndrome (HAVS). Your responsibilities will also include supporting the Mechanical Technicians/Planners within the organisation, undertaking general maintenance tasks, mentoring apprentices, and planning/scheduling work. To be successful in this role, you must have completed a recognised mechanical apprenticeship and hold at least an HNC-level qualification. Safety-conscious, self-motivated, and detail-oriented, you possess excellent communication skills and are comfortable working both independently and as part of a team. Prior experience with PSSR, LOLER, or HAVS would be advantageous, but training will be provided. Additionally, you should be comfortable managing contractors and liaising with regulatory bodies. Key Requirements + Duties: Plan and schedule the test, inspection, and maintenance programme in accordance with legislative requirements. Ensure all test documentation is valid and traceable within the system. Deliver planned and corrective actions in a timely manner, adhering to legislative requirements. Produce and update safe systems of work, risk assessments, and interpret written schemes of examination. Commitment to all safety protocols and procedures. Ability to interpret technical drawings and specifications. Collaborate effectively with engineering and production personnel. Utilise the maintenance management system as required. Participate in an engineering call out rota. Core hours will be 37.5 hrs per week, Monday to Friday, with a flexible approach depending on operational needs. In return, our client offers an attractive benefits package, including a competitive salary, bonus, and pension scheme. You will also enjoy 25 days of annual leave plus statutory days, a free on-site gym, an Employee Assistance Programme, an employee retail discount scheme, and more. As part of a caring community, you will have opportunities for personal and professional growth within a responsible, sustainable organisation that values diversity and inclusivity. If this opportunity excites you, don't hesitate to submit your application Please note that our client is an industry-leading manufacturing organisation based in Irvine, Ayrshire, with a strong reputation for providing high-quality employment and development opportunities for over 35 years. Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you.
20/05/2024
Full time
Are you eager to be part of a global, growing organisation that is leading the way in developing renewable alternatives to fossil-based materials? Our client, an industry leader in the manufacturing sector, is looking for a talented Engineering Compliance Technician to join their team in Irvine. This is an exciting opportunity to contribute to the maintenance and development of their plant and equipment, ensuring the highest standards of accuracy and reliability. As an Engineering Compliance Technician, you will play a vital role in meeting all statutory and legislative engineering testing and inspections, including the Pressure Systems Safety Regulations 2000 (PSSR), Lifting Operations and Lifting Equipment Regulations (LOLER), and Hand-Arm Vibration Syndrome (HAVS). Your responsibilities will also include supporting the Mechanical Technicians/Planners within the organisation, undertaking general maintenance tasks, mentoring apprentices, and planning/scheduling work. To be successful in this role, you must have completed a recognised mechanical apprenticeship and hold at least an HNC-level qualification. Safety-conscious, self-motivated, and detail-oriented, you possess excellent communication skills and are comfortable working both independently and as part of a team. Prior experience with PSSR, LOLER, or HAVS would be advantageous, but training will be provided. Additionally, you should be comfortable managing contractors and liaising with regulatory bodies. Key Requirements + Duties: Plan and schedule the test, inspection, and maintenance programme in accordance with legislative requirements. Ensure all test documentation is valid and traceable within the system. Deliver planned and corrective actions in a timely manner, adhering to legislative requirements. Produce and update safe systems of work, risk assessments, and interpret written schemes of examination. Commitment to all safety protocols and procedures. Ability to interpret technical drawings and specifications. Collaborate effectively with engineering and production personnel. Utilise the maintenance management system as required. Participate in an engineering call out rota. Core hours will be 37.5 hrs per week, Monday to Friday, with a flexible approach depending on operational needs. In return, our client offers an attractive benefits package, including a competitive salary, bonus, and pension scheme. You will also enjoy 25 days of annual leave plus statutory days, a free on-site gym, an Employee Assistance Programme, an employee retail discount scheme, and more. As part of a caring community, you will have opportunities for personal and professional growth within a responsible, sustainable organisation that values diversity and inclusivity. If this opportunity excites you, don't hesitate to submit your application Please note that our client is an industry-leading manufacturing organisation based in Irvine, Ayrshire, with a strong reputation for providing high-quality employment and development opportunities for over 35 years. Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you.
Mechanical Technician, fitter - Aircraft, aerospace, aviation Contract, immediate with 6 monthly extensions £competitive hourly rate Fitter, technician, mechanical, aircraft, aviation, aerospace As an Aircraft Mechanical Technician, you will be build, commission and test aircraft and related sub-systems. You will also assist with the complete development of test rigs and supporting flight test programmes. Requirements: Proven experience within aircraft/aviation maintenance/overhaul educational background in aerospace or aviation/wider engineering accreditations Good knowledge of structural production techniques, repairs & composites. Knowledge of electrical systems (HV) & aircraft/maintenance documentation (beneficial). Commercial or military aircraft experience. For a full consultation and to be considered, please apply with your up to date CV and contact details.
20/05/2024
Project-based
Mechanical Technician, fitter - Aircraft, aerospace, aviation Contract, immediate with 6 monthly extensions £competitive hourly rate Fitter, technician, mechanical, aircraft, aviation, aerospace As an Aircraft Mechanical Technician, you will be build, commission and test aircraft and related sub-systems. You will also assist with the complete development of test rigs and supporting flight test programmes. Requirements: Proven experience within aircraft/aviation maintenance/overhaul educational background in aerospace or aviation/wider engineering accreditations Good knowledge of structural production techniques, repairs & composites. Knowledge of electrical systems (HV) & aircraft/maintenance documentation (beneficial). Commercial or military aircraft experience. For a full consultation and to be considered, please apply with your up to date CV and contact details.
I am looking for an experienced Infrastructure Support Technician who wants to work 37.5 hours a week in fantastic business that really supports learning and development for a salary up to £40k and a host of fantastic benefits Client Details A Leading Financial Services Business Description You'll be joining a leading Financial Services company in providing solutions and improvements to their systems. This role will involve overseeing the businesses Infrastructure, as well as the testing of systems and maintenance. To be successful in this role you will be able to demonstrate the following: Acting as an escalation point you will provide 3rd line support and maintenance for all IT Systems. You will have a strong understanding of Hyper-V, ESXI, and Azure. Exposure to Networking & Security - TCP/IP, DNS, DHCP, IPsec, VoIP, Firewall's, Switches and Routers. In this role you will have responsibility for leading Infrastructure projects so exposure of this would be highly advantageous. Having a basic understanding of SQL would be desirable. You will have experience with backup methodologies ideally using Veeam. Profile This role would suit an individual that has a passion for working within Technology, and wants to learn and develop within Infrastructure. Job Offer This company has a track record of really looking after its employees by continually investing in longer term career and skills development on an individual basis. If this sounds like your ideal next move and you're able to work in the Glasgow office 5 days per week then please apply NOW as this role will definitely not be around for long.
17/05/2024
Full time
I am looking for an experienced Infrastructure Support Technician who wants to work 37.5 hours a week in fantastic business that really supports learning and development for a salary up to £40k and a host of fantastic benefits Client Details A Leading Financial Services Business Description You'll be joining a leading Financial Services company in providing solutions and improvements to their systems. This role will involve overseeing the businesses Infrastructure, as well as the testing of systems and maintenance. To be successful in this role you will be able to demonstrate the following: Acting as an escalation point you will provide 3rd line support and maintenance for all IT Systems. You will have a strong understanding of Hyper-V, ESXI, and Azure. Exposure to Networking & Security - TCP/IP, DNS, DHCP, IPsec, VoIP, Firewall's, Switches and Routers. In this role you will have responsibility for leading Infrastructure projects so exposure of this would be highly advantageous. Having a basic understanding of SQL would be desirable. You will have experience with backup methodologies ideally using Veeam. Profile This role would suit an individual that has a passion for working within Technology, and wants to learn and develop within Infrastructure. Job Offer This company has a track record of really looking after its employees by continually investing in longer term career and skills development on an individual basis. If this sounds like your ideal next move and you're able to work in the Glasgow office 5 days per week then please apply NOW as this role will definitely not be around for long.
Wireperson | Stone (Staffordshire) | £27,000 pa | Fully on-site | NVQ 1 + Level Needed Yolk Recruitment are working with a market leader in advanced system integration within the energy sector. They're investing heavily in their Stone site and are looking for an experienced Wireperson to join their energy division. If successful you will join an experienced team working within the Electrical control wire assembly and test team working across a variety of small and large scale projects for clients within the energy industry. Due to the industry you will need to be eligible for BPSS clearance. This is what you will be doing: The assembly and wiring of electrical components, of varying size and complexity using drawings, parts lists and specifications Mechanical assembly of cubicles and framework Bench assembly of electrical sub-assemblies Quality of own work and rework identified during inspection and test Working to agreed on company standards and procedures Completion of assembly record cards to ensure traceability and identification of serial numbered components Updating electronic issues log and communicating directly with responsible design engineers The experience you will bring to the team: At least 2 years experience Ability to read and understand electrical schematic drawings Ability to manage your time to successfully complete all assigned tasks within agreed timescales Experience leading a production Bay to ensure everyone within that Bay is working to the correct standards Experience completing assembly record cards. What you will receive in return: Private medical insurance Attractive pension package 25 days holiday (bank holidays on top) Flexible working options
17/05/2024
Full time
Wireperson | Stone (Staffordshire) | £27,000 pa | Fully on-site | NVQ 1 + Level Needed Yolk Recruitment are working with a market leader in advanced system integration within the energy sector. They're investing heavily in their Stone site and are looking for an experienced Wireperson to join their energy division. If successful you will join an experienced team working within the Electrical control wire assembly and test team working across a variety of small and large scale projects for clients within the energy industry. Due to the industry you will need to be eligible for BPSS clearance. This is what you will be doing: The assembly and wiring of electrical components, of varying size and complexity using drawings, parts lists and specifications Mechanical assembly of cubicles and framework Bench assembly of electrical sub-assemblies Quality of own work and rework identified during inspection and test Working to agreed on company standards and procedures Completion of assembly record cards to ensure traceability and identification of serial numbered components Updating electronic issues log and communicating directly with responsible design engineers The experience you will bring to the team: At least 2 years experience Ability to read and understand electrical schematic drawings Ability to manage your time to successfully complete all assigned tasks within agreed timescales Experience leading a production Bay to ensure everyone within that Bay is working to the correct standards Experience completing assembly record cards. What you will receive in return: Private medical insurance Attractive pension package 25 days holiday (bank holidays on top) Flexible working options
Datacenter Network Technician 6 month initial contract Onsite (driver's license required for travel to different DC sites) IT Consultancy and MSP require on onsite Datacenter Engineer for basic racking and stacking support. Perform simple pre-tests Depending on the size of the cabinet, either rack equipment in parallel or remove old kit first Rack and stack network equipment Patch required ports Document installed equipment, including serial numbers and asset tags Remove old equipment from racks and note its serial numbers and asset tags Perform repeat tests Engage with the onsite contact for testing (a plan will be provided) Ensure the rack is left tidy and old equipment is stacked in an agreed location Place rubbish/recycling in an agreed location Take a photo of the cabinet with the new equipment Submit CI information and photos to the remote engineer for service acceptance In the event of any issues, the resources may need to provide intelligent hands-on support with guidance from a remote network consultant or technical advisor.
17/05/2024
Project-based
Datacenter Network Technician 6 month initial contract Onsite (driver's license required for travel to different DC sites) IT Consultancy and MSP require on onsite Datacenter Engineer for basic racking and stacking support. Perform simple pre-tests Depending on the size of the cabinet, either rack equipment in parallel or remove old kit first Rack and stack network equipment Patch required ports Document installed equipment, including serial numbers and asset tags Remove old equipment from racks and note its serial numbers and asset tags Perform repeat tests Engage with the onsite contact for testing (a plan will be provided) Ensure the rack is left tidy and old equipment is stacked in an agreed location Place rubbish/recycling in an agreed location Take a photo of the cabinet with the new equipment Submit CI information and photos to the remote engineer for service acceptance In the event of any issues, the resources may need to provide intelligent hands-on support with guidance from a remote network consultant or technical advisor.
The Armament supervisor is responsible to the Armament lead and should be an experienced and skilled technician undertaking a range of detailed maintenance activities on aircraft equipment and/or aircraft components. The post holder should have an excellent understanding of the construct of the approved Technical Information set and is competent to supervise personnel who are working on maintenance instructions and in accordance with the organisation's Regulatory Framework and should be able to demonstrate a distinct ability to analyse and diagnose faults to equipment & assemblies, follow diagnostic procedures and work effectively within a team providing guidance to less experienced team members in a diverse and dynamic operational environment. Responsible for maintaining airworthiness through appropriate task delegation and authorisation on an aircraft or aircraft component. Responsible for meeting agreed delivery targets at a tactical level. Demonstrates people management and leadership skills Demonstrates awareness of broader external dependencies and identifies areas for continuous improvement. In addition the Post Holder shall hold certain privileges delegated from the Maintenance Manager. RequirementsCore Activities: Undertake detailed maintenance, inspection and supervision activities of aircraft components. Assuring work carried out has been completed in accordance with the SOW/Work package using the relevant approved technical information. Resolving faults and maintenance issues, including an awareness of configuration management. Undertake and complete tasked maintenance & diagnostic activities on weapons systems/components which will include, as appropriate, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test. Will be responsible for the operational output of each Component MRO Workshop under their control in line with agreed customer requirements. Post holder will also have responsibilities for the cost and schedule adherence of the component maintenance activities. Supervise team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider programme. Responsible for meeting agreed delivery targets in the short to medium term through the supervision of others. Progress reporting against delivery targets to management. Undertake support tasks within the component maintenance facility which are required to maintain compliance with the MOE and AMC procedures (eg oversight checks, control of tooling/test equipment etc.) Undertake fault evaluation and raise ad hoc work cards and for found faults' during maintenance. Ability to scope and carry out independent and vital inspections. Maintain personal & teams task authorisation for working on components in accordance with AMC requirements. Required to provide support and guidance, including allocation of tasks to appropriately authorised maintenance technicians. Provide effective leadership and supervision to team members under your direct supervision. Key Activities: Performance indicators - Ensure the effective management of Part 145 activities by setting delivery targets, monitoring progress and developing performance improvement programmes. Prioritises activities within/across teams to maximise efficiency. Represents the Maintenance Manager at management reviews, where necessary. Responsible for the assessment of escalated issues for any impact on Continuing Airworthiness and generating effective resolution, or sponsoring escalation to management, as appropriate. Completion of activities - Ensure all Part 145 activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Ensure all Part 145 activities are performed by suitably qualified, experienced and authorised personnel. Ensure the integration of Part 145 activity within the business, including the engagement of key stakeholders at all stages of the process. Provide support and guidance to the team(s). Procedure/standards - Manage the Part 145 team(s) compliance with the Part 145 Exposition, its associated procedures and standards, and any other Company procedures and standards, as applicable. Identify, propose and implement change as required, whilst ensuring compliance. Safety Management System - Promote the application of Human Factors, Error Management, Risk Management and Safety Assurance within the Part 145 team(s), together with the proactive analysis, mitigation and management of Hazards. Management System Assurance - Ensure Part 145 team(s) activities are compliant with the AM&S Governance and Assurance framework. Ensure Process Confirmations and independent assurance audits are supported by Part 145 personnel and integrated within/across teams. Manage the response to audit findings in a timely and appropriate manner and provide information into the relevant reviews. Generate and implement effective improvements within/across teams to overcome any non-compliance and monitor effectiveness. Statutory/Regulatory & Legislative requirements - Able to demonstrate a good understanding and application of the relevant Continuing Airworthiness Regulatory framework, and ensure any Regulatory-driven changes are implemented within the Part 145 team(s) activities. Ensure compliance with all other requirements, eg ITAR, EaPW, ISO, etc. Contractual Requirements - Ensure compliance with all applicable contractual requirements, eg through support to contract reviews, and ensure any changes are implemented into the Part 145 activities, as appropriate. Requirements: Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship/qualifications. Academic qualification for this role is a minimum of City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Experienced and competent leader at this level. Typically 2+ years' experience including type, classed as fully competent with all required 'Authorities' in place. Demonstrating breadth of experience, currency & recency via a Log Book (electronic or paper) capturing skills, knowledge and authorities for working on Aircraft type or in bays. Practical experience and expertise in the application of aviation safety standards and safe operating practices. A comprehensive knowledge of the Acceptable Means of Compliance. Management training. Leadership- Foundation. Human Factors- Standard Course Specification. E&PW Awareness- Standard Course Specification. ITAR Awareness- Standard Course Specification. Benefits Competitive Basic Salary 25 Days Annual Leave Annual Bonus On site Parking Pension Scheme Life Assurance
16/05/2024
Full time
The Armament supervisor is responsible to the Armament lead and should be an experienced and skilled technician undertaking a range of detailed maintenance activities on aircraft equipment and/or aircraft components. The post holder should have an excellent understanding of the construct of the approved Technical Information set and is competent to supervise personnel who are working on maintenance instructions and in accordance with the organisation's Regulatory Framework and should be able to demonstrate a distinct ability to analyse and diagnose faults to equipment & assemblies, follow diagnostic procedures and work effectively within a team providing guidance to less experienced team members in a diverse and dynamic operational environment. Responsible for maintaining airworthiness through appropriate task delegation and authorisation on an aircraft or aircraft component. Responsible for meeting agreed delivery targets at a tactical level. Demonstrates people management and leadership skills Demonstrates awareness of broader external dependencies and identifies areas for continuous improvement. In addition the Post Holder shall hold certain privileges delegated from the Maintenance Manager. RequirementsCore Activities: Undertake detailed maintenance, inspection and supervision activities of aircraft components. Assuring work carried out has been completed in accordance with the SOW/Work package using the relevant approved technical information. Resolving faults and maintenance issues, including an awareness of configuration management. Undertake and complete tasked maintenance & diagnostic activities on weapons systems/components which will include, as appropriate, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test. Will be responsible for the operational output of each Component MRO Workshop under their control in line with agreed customer requirements. Post holder will also have responsibilities for the cost and schedule adherence of the component maintenance activities. Supervise team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider programme. Responsible for meeting agreed delivery targets in the short to medium term through the supervision of others. Progress reporting against delivery targets to management. Undertake support tasks within the component maintenance facility which are required to maintain compliance with the MOE and AMC procedures (eg oversight checks, control of tooling/test equipment etc.) Undertake fault evaluation and raise ad hoc work cards and for found faults' during maintenance. Ability to scope and carry out independent and vital inspections. Maintain personal & teams task authorisation for working on components in accordance with AMC requirements. Required to provide support and guidance, including allocation of tasks to appropriately authorised maintenance technicians. Provide effective leadership and supervision to team members under your direct supervision. Key Activities: Performance indicators - Ensure the effective management of Part 145 activities by setting delivery targets, monitoring progress and developing performance improvement programmes. Prioritises activities within/across teams to maximise efficiency. Represents the Maintenance Manager at management reviews, where necessary. Responsible for the assessment of escalated issues for any impact on Continuing Airworthiness and generating effective resolution, or sponsoring escalation to management, as appropriate. Completion of activities - Ensure all Part 145 activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Ensure all Part 145 activities are performed by suitably qualified, experienced and authorised personnel. Ensure the integration of Part 145 activity within the business, including the engagement of key stakeholders at all stages of the process. Provide support and guidance to the team(s). Procedure/standards - Manage the Part 145 team(s) compliance with the Part 145 Exposition, its associated procedures and standards, and any other Company procedures and standards, as applicable. Identify, propose and implement change as required, whilst ensuring compliance. Safety Management System - Promote the application of Human Factors, Error Management, Risk Management and Safety Assurance within the Part 145 team(s), together with the proactive analysis, mitigation and management of Hazards. Management System Assurance - Ensure Part 145 team(s) activities are compliant with the AM&S Governance and Assurance framework. Ensure Process Confirmations and independent assurance audits are supported by Part 145 personnel and integrated within/across teams. Manage the response to audit findings in a timely and appropriate manner and provide information into the relevant reviews. Generate and implement effective improvements within/across teams to overcome any non-compliance and monitor effectiveness. Statutory/Regulatory & Legislative requirements - Able to demonstrate a good understanding and application of the relevant Continuing Airworthiness Regulatory framework, and ensure any Regulatory-driven changes are implemented within the Part 145 team(s) activities. Ensure compliance with all other requirements, eg ITAR, EaPW, ISO, etc. Contractual Requirements - Ensure compliance with all applicable contractual requirements, eg through support to contract reviews, and ensure any changes are implemented into the Part 145 activities, as appropriate. Requirements: Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship/qualifications. Academic qualification for this role is a minimum of City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Experienced and competent leader at this level. Typically 2+ years' experience including type, classed as fully competent with all required 'Authorities' in place. Demonstrating breadth of experience, currency & recency via a Log Book (electronic or paper) capturing skills, knowledge and authorities for working on Aircraft type or in bays. Practical experience and expertise in the application of aviation safety standards and safe operating practices. A comprehensive knowledge of the Acceptable Means of Compliance. Management training. Leadership- Foundation. Human Factors- Standard Course Specification. E&PW Awareness- Standard Course Specification. ITAR Awareness- Standard Course Specification. Benefits Competitive Basic Salary 25 Days Annual Leave Annual Bonus On site Parking Pension Scheme Life Assurance
SC Cleared Assembly Technician £400 pd Inside IR35 Guildford (on site) * REQUIRES ACTIVE SC CLEARANCE* Overview: Here at Anson McCade we are working with the largest UK defence consultancy to recruit for an assembly technician to join on a contract basis. You will be involved with all aspects of the assembly and test of complex digital and analogue electronic products, working closely with a team of Manufacturing Engineers and Hardware Developers. You will work across all stages of the product life cycle including prototypes, productionisation, production and support, This role is 5 days a week on site. The skill set we are looking for: Any RF or DeBug experience Electronics background Experience with PCB's good Some soldering skills useful - IPC Qualification practical engineering experience working in a live electronics production environment Understanding of electronic principles, circuit diagrams, assembly drawings, BoMs and test specifications. Contract Details: Guildford 5 days on site £400 pd Inside IR35 3 month initial contract with view to extend. REQUIRES ACTIVE SC CLEARANCE
15/05/2024
Project-based
SC Cleared Assembly Technician £400 pd Inside IR35 Guildford (on site) * REQUIRES ACTIVE SC CLEARANCE* Overview: Here at Anson McCade we are working with the largest UK defence consultancy to recruit for an assembly technician to join on a contract basis. You will be involved with all aspects of the assembly and test of complex digital and analogue electronic products, working closely with a team of Manufacturing Engineers and Hardware Developers. You will work across all stages of the product life cycle including prototypes, productionisation, production and support, This role is 5 days a week on site. The skill set we are looking for: Any RF or DeBug experience Electronics background Experience with PCB's good Some soldering skills useful - IPC Qualification practical engineering experience working in a live electronics production environment Understanding of electronic principles, circuit diagrams, assembly drawings, BoMs and test specifications. Contract Details: Guildford 5 days on site £400 pd Inside IR35 3 month initial contract with view to extend. REQUIRES ACTIVE SC CLEARANCE