The Armament supervisor is responsible to the Armament lead and should be an experienced and skilled technician undertaking a range of detailed maintenance activities on aircraft equipment and/or aircraft components. The post holder should have an excellent understanding of the construct of the approved Technical Information set and is competent to supervise personnel who are working on maintenance instructions and in accordance with the organisation's Regulatory Framework and should be able to demonstrate a distinct ability to analyse and diagnose faults to equipment & assemblies, follow diagnostic procedures and work effectively within a team providing guidance to less experienced team members in a diverse and dynamic operational environment. Responsible for maintaining airworthiness through appropriate task delegation and authorisation on an aircraft or aircraft component. Responsible for meeting agreed delivery targets at a tactical level. Demonstrates people management and leadership skills Demonstrates awareness of broader external dependencies and identifies areas for continuous improvement. In addition the Post Holder shall hold certain privileges delegated from the Maintenance Manager. RequirementsCore Activities: Undertake detailed maintenance, inspection and supervision activities of aircraft components. Assuring work carried out has been completed in accordance with the SOW/Work package using the relevant approved technical information. Resolving faults and maintenance issues, including an awareness of configuration management. Undertake and complete tasked maintenance & diagnostic activities on weapons systems/components which will include, as appropriate, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test. Will be responsible for the operational output of each Component MRO Workshop under their control in line with agreed customer requirements. Post holder will also have responsibilities for the cost and schedule adherence of the component maintenance activities. Supervise team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider programme. Responsible for meeting agreed delivery targets in the short to medium term through the supervision of others. Progress reporting against delivery targets to management. Undertake support tasks within the component maintenance facility which are required to maintain compliance with the MOE and AMC procedures (eg oversight checks, control of tooling/test equipment etc.) Undertake fault evaluation and raise ad hoc work cards and for found faults' during maintenance. Ability to scope and carry out independent and vital inspections. Maintain personal & teams task authorisation for working on components in accordance with AMC requirements. Required to provide support and guidance, including allocation of tasks to appropriately authorised maintenance technicians. Provide effective leadership and supervision to team members under your direct supervision. Key Activities: Performance indicators - Ensure the effective management of Part 145 activities by setting delivery targets, monitoring progress and developing performance improvement programmes. Prioritises activities within/across teams to maximise efficiency. Represents the Maintenance Manager at management reviews, where necessary. Responsible for the assessment of escalated issues for any impact on Continuing Airworthiness and generating effective resolution, or sponsoring escalation to management, as appropriate. Completion of activities - Ensure all Part 145 activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Ensure all Part 145 activities are performed by suitably qualified, experienced and authorised personnel. Ensure the integration of Part 145 activity within the business, including the engagement of key stakeholders at all stages of the process. Provide support and guidance to the team(s). Procedure/standards - Manage the Part 145 team(s) compliance with the Part 145 Exposition, its associated procedures and standards, and any other Company procedures and standards, as applicable. Identify, propose and implement change as required, whilst ensuring compliance. Safety Management System - Promote the application of Human Factors, Error Management, Risk Management and Safety Assurance within the Part 145 team(s), together with the proactive analysis, mitigation and management of Hazards. Management System Assurance - Ensure Part 145 team(s) activities are compliant with the AM&S Governance and Assurance framework. Ensure Process Confirmations and independent assurance audits are supported by Part 145 personnel and integrated within/across teams. Manage the response to audit findings in a timely and appropriate manner and provide information into the relevant reviews. Generate and implement effective improvements within/across teams to overcome any non-compliance and monitor effectiveness. Statutory/Regulatory & Legislative requirements - Able to demonstrate a good understanding and application of the relevant Continuing Airworthiness Regulatory framework, and ensure any Regulatory-driven changes are implemented within the Part 145 team(s) activities. Ensure compliance with all other requirements, eg ITAR, EaPW, ISO, etc. Contractual Requirements - Ensure compliance with all applicable contractual requirements, eg through support to contract reviews, and ensure any changes are implemented into the Part 145 activities, as appropriate. Requirements: Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship/qualifications. Academic qualification for this role is a minimum of City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Experienced and competent leader at this level. Typically 2+ years' experience including type, classed as fully competent with all required 'Authorities' in place. Demonstrating breadth of experience, currency & recency via a Log Book (electronic or paper) capturing skills, knowledge and authorities for working on Aircraft type or in bays. Practical experience and expertise in the application of aviation safety standards and safe operating practices. A comprehensive knowledge of the Acceptable Means of Compliance. Management training. Leadership- Foundation. Human Factors- Standard Course Specification. E&PW Awareness- Standard Course Specification. ITAR Awareness- Standard Course Specification. Benefits Competitive Basic Salary 25 Days Annual Leave Annual Bonus On site Parking Pension Scheme Life Assurance
29/04/2024
Full time
The Armament supervisor is responsible to the Armament lead and should be an experienced and skilled technician undertaking a range of detailed maintenance activities on aircraft equipment and/or aircraft components. The post holder should have an excellent understanding of the construct of the approved Technical Information set and is competent to supervise personnel who are working on maintenance instructions and in accordance with the organisation's Regulatory Framework and should be able to demonstrate a distinct ability to analyse and diagnose faults to equipment & assemblies, follow diagnostic procedures and work effectively within a team providing guidance to less experienced team members in a diverse and dynamic operational environment. Responsible for maintaining airworthiness through appropriate task delegation and authorisation on an aircraft or aircraft component. Responsible for meeting agreed delivery targets at a tactical level. Demonstrates people management and leadership skills Demonstrates awareness of broader external dependencies and identifies areas for continuous improvement. In addition the Post Holder shall hold certain privileges delegated from the Maintenance Manager. RequirementsCore Activities: Undertake detailed maintenance, inspection and supervision activities of aircraft components. Assuring work carried out has been completed in accordance with the SOW/Work package using the relevant approved technical information. Resolving faults and maintenance issues, including an awareness of configuration management. Undertake and complete tasked maintenance & diagnostic activities on weapons systems/components which will include, as appropriate, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test. Will be responsible for the operational output of each Component MRO Workshop under their control in line with agreed customer requirements. Post holder will also have responsibilities for the cost and schedule adherence of the component maintenance activities. Supervise team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider programme. Responsible for meeting agreed delivery targets in the short to medium term through the supervision of others. Progress reporting against delivery targets to management. Undertake support tasks within the component maintenance facility which are required to maintain compliance with the MOE and AMC procedures (eg oversight checks, control of tooling/test equipment etc.) Undertake fault evaluation and raise ad hoc work cards and for found faults' during maintenance. Ability to scope and carry out independent and vital inspections. Maintain personal & teams task authorisation for working on components in accordance with AMC requirements. Required to provide support and guidance, including allocation of tasks to appropriately authorised maintenance technicians. Provide effective leadership and supervision to team members under your direct supervision. Key Activities: Performance indicators - Ensure the effective management of Part 145 activities by setting delivery targets, monitoring progress and developing performance improvement programmes. Prioritises activities within/across teams to maximise efficiency. Represents the Maintenance Manager at management reviews, where necessary. Responsible for the assessment of escalated issues for any impact on Continuing Airworthiness and generating effective resolution, or sponsoring escalation to management, as appropriate. Completion of activities - Ensure all Part 145 activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Ensure all Part 145 activities are performed by suitably qualified, experienced and authorised personnel. Ensure the integration of Part 145 activity within the business, including the engagement of key stakeholders at all stages of the process. Provide support and guidance to the team(s). Procedure/standards - Manage the Part 145 team(s) compliance with the Part 145 Exposition, its associated procedures and standards, and any other Company procedures and standards, as applicable. Identify, propose and implement change as required, whilst ensuring compliance. Safety Management System - Promote the application of Human Factors, Error Management, Risk Management and Safety Assurance within the Part 145 team(s), together with the proactive analysis, mitigation and management of Hazards. Management System Assurance - Ensure Part 145 team(s) activities are compliant with the AM&S Governance and Assurance framework. Ensure Process Confirmations and independent assurance audits are supported by Part 145 personnel and integrated within/across teams. Manage the response to audit findings in a timely and appropriate manner and provide information into the relevant reviews. Generate and implement effective improvements within/across teams to overcome any non-compliance and monitor effectiveness. Statutory/Regulatory & Legislative requirements - Able to demonstrate a good understanding and application of the relevant Continuing Airworthiness Regulatory framework, and ensure any Regulatory-driven changes are implemented within the Part 145 team(s) activities. Ensure compliance with all other requirements, eg ITAR, EaPW, ISO, etc. Contractual Requirements - Ensure compliance with all applicable contractual requirements, eg through support to contract reviews, and ensure any changes are implemented into the Part 145 activities, as appropriate. Requirements: Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship/qualifications. Academic qualification for this role is a minimum of City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Experienced and competent leader at this level. Typically 2+ years' experience including type, classed as fully competent with all required 'Authorities' in place. Demonstrating breadth of experience, currency & recency via a Log Book (electronic or paper) capturing skills, knowledge and authorities for working on Aircraft type or in bays. Practical experience and expertise in the application of aviation safety standards and safe operating practices. A comprehensive knowledge of the Acceptable Means of Compliance. Management training. Leadership- Foundation. Human Factors- Standard Course Specification. E&PW Awareness- Standard Course Specification. ITAR Awareness- Standard Course Specification. Benefits Competitive Basic Salary 25 Days Annual Leave Annual Bonus On site Parking Pension Scheme Life Assurance
We are currently looking on behalf of one of our important clients for a Head of Laboratory Test Development & Validation (German Speaking). The role is a permanent position based in Bern Canton & comes with good home office allowance. Your Role: Oversee the personnel & technical management of a specialist group of 4 Engineers & 3 Laboratory Technicians. Develop & validate new physical measurement & testing methods. Provide technical support for Design Verification Laboratories. Hold responsibility for the operation & maintenance of a Development Laboratory. Plan, coordinate & execute measurement & testing orders in relation to Product Innovation & Product Development. Place, award & support contracts to external service providers if required. Your Skills: At least 5 years of relevant professional experience including experience within Development Laboratories. Skilled & experienced in Leading teams. Ideally experienced in Design Verification & the Medical Technology sector. Your Profile: Completed relevant Scientific or Technical University Degree. Communicative, strong leadership skills & solution-oriented. Fluent English & good German language skills (to at least B2 Level) are a mandatory requirement.
29/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Head of Laboratory Test Development & Validation (German Speaking). The role is a permanent position based in Bern Canton & comes with good home office allowance. Your Role: Oversee the personnel & technical management of a specialist group of 4 Engineers & 3 Laboratory Technicians. Develop & validate new physical measurement & testing methods. Provide technical support for Design Verification Laboratories. Hold responsibility for the operation & maintenance of a Development Laboratory. Plan, coordinate & execute measurement & testing orders in relation to Product Innovation & Product Development. Place, award & support contracts to external service providers if required. Your Skills: At least 5 years of relevant professional experience including experience within Development Laboratories. Skilled & experienced in Leading teams. Ideally experienced in Design Verification & the Medical Technology sector. Your Profile: Completed relevant Scientific or Technical University Degree. Communicative, strong leadership skills & solution-oriented. Fluent English & good German language skills (to at least B2 Level) are a mandatory requirement.
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
29/04/2024
Project-based
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
HM Land Registry ("HMLR") and Inspire People are partnering together to bring you an exciting opportunity for a Lead Infrastructure Engineer to shape, provide oversight and manage the implementation and maintenance of Microsoft Power Platform solutions within a brand-new PowerApps team in IT Operations at HMLR. Starting salary of £54,388 to £61,850 dependent upon interview assessment plus excellent Civil Service benefits and 28% pension contribution. Flexible, hybrid working from Plymouth. HMLR's ambition is to become the world's leading land registry for speed, simplicity and an open approach to data. Their existing software systems and services form part of the critical national infrastructure, safeguarding land and property ownership valued at £7 trillion enabling over £1 trillion worth of personal and commercial lending to be secured against property across England and Wales. The Power Platform team sits within the IT Operations Practice, a new team to the organisation and will form part of a wider group of infrastructure engineering teams which design, deliver and support corporate services, for 6500 internal users with some exciting deliverables already rolled out for testing such as a new Desk Booking application. This role is to provide leadership to the team and engage with other Lead Infrastructure Engineers, Technical Leads, Delivery Leads, New Service Managers and Architects to deliver solutions to agreed designs. You will lead and manage the implementation, and maintenance of Infrastructure and Microsoft Power Platform solutions, provide guidance, mentorship, and oversight to the Power platform team, ensuring the reliability, scalability, development, and security of our Power Platform environment. The role holder will champion and lead on taking forward technical consolidation and/or improvement activities providing guidance and leadership to technicians throughout the IT Operations Practice and wider. Responsibilities include: Lead on the design, development and maintenance of Microsoft Power Apps solutions running on the Power Platform, using Power Fx low code programming. Use Power Apps, Power Automate, Power BI, and Microsoft Co-pilot Studio and other Power Platform related technologies to create low code solutions if and where necessary. Lead on engagement with stakeholders to understand business needs required for the development of Power Apps. Support end-users adoption of Power Platform technologies. Leading on the creation of Continuous Integration and Continuous Delivery pipelines for Power Platform and Azure Services Take a leading role in the technical development of staff within the practice helping understand technical skills and capability required now and in the future Task manage technical staff resource as required, setting them clear objectives and tracking them to completion whilst providing appropriate feedback to line managers. There will be line management responsibility, previous experience is desirable Essential skills: Strong knowledge of Power Platform components (Power Apps/Power Automate/Power BI/Microsoft Co-pilot Studio) Some Scripting or programming knowledge (eg C#, ASP.NET, Ruby, Java, Python, Power Fx, JavaScript) Experience of implementing and managing Power Platform components and infrastructure solutions and administration tasks within the Power Platform environment. Experience of optimising power apps to increase performance Evidence of planning and managing significant technical change. Effective communication skills, including the ability to interact and build working relationships with stakeholders. Location Expectation is to be working from the Plymouth office 60% of your time across the month (typically 3 days/week). Benefits Alongside your salary of circa £62,000 HM Land Registry contributes £9,881 towards you being a member of the Civil Service Defined Benefit Pension scheme and the following benefits: Annual leave of 28.5 days' paid holiday during each holiday year plus 8 days public holidays Personalised training and development plans including expensed accreditations with training days set aside Flexi-time scheme (You decide what working hours work best for you) Attractive pension options inc. 28% Civil Service Pension contribution Social and sports club Access to our employee assistance programme for counselling and support on a wide range of issues Interest-free loan for season tickets Cycle to work scheme (salary sacrifice). HMLR have a strong and positive culture, a commitment to inclusivity, an emphasis on continuous learning and development and flexible ways of working. Further information This role requires SC clearance, a condition of which is to have been present in the UK for 5 out of the past 5 years. This posy may include participation in an on-call rota, subject to additional pay.
26/04/2024
Full time
HM Land Registry ("HMLR") and Inspire People are partnering together to bring you an exciting opportunity for a Lead Infrastructure Engineer to shape, provide oversight and manage the implementation and maintenance of Microsoft Power Platform solutions within a brand-new PowerApps team in IT Operations at HMLR. Starting salary of £54,388 to £61,850 dependent upon interview assessment plus excellent Civil Service benefits and 28% pension contribution. Flexible, hybrid working from Plymouth. HMLR's ambition is to become the world's leading land registry for speed, simplicity and an open approach to data. Their existing software systems and services form part of the critical national infrastructure, safeguarding land and property ownership valued at £7 trillion enabling over £1 trillion worth of personal and commercial lending to be secured against property across England and Wales. The Power Platform team sits within the IT Operations Practice, a new team to the organisation and will form part of a wider group of infrastructure engineering teams which design, deliver and support corporate services, for 6500 internal users with some exciting deliverables already rolled out for testing such as a new Desk Booking application. This role is to provide leadership to the team and engage with other Lead Infrastructure Engineers, Technical Leads, Delivery Leads, New Service Managers and Architects to deliver solutions to agreed designs. You will lead and manage the implementation, and maintenance of Infrastructure and Microsoft Power Platform solutions, provide guidance, mentorship, and oversight to the Power platform team, ensuring the reliability, scalability, development, and security of our Power Platform environment. The role holder will champion and lead on taking forward technical consolidation and/or improvement activities providing guidance and leadership to technicians throughout the IT Operations Practice and wider. Responsibilities include: Lead on the design, development and maintenance of Microsoft Power Apps solutions running on the Power Platform, using Power Fx low code programming. Use Power Apps, Power Automate, Power BI, and Microsoft Co-pilot Studio and other Power Platform related technologies to create low code solutions if and where necessary. Lead on engagement with stakeholders to understand business needs required for the development of Power Apps. Support end-users adoption of Power Platform technologies. Leading on the creation of Continuous Integration and Continuous Delivery pipelines for Power Platform and Azure Services Take a leading role in the technical development of staff within the practice helping understand technical skills and capability required now and in the future Task manage technical staff resource as required, setting them clear objectives and tracking them to completion whilst providing appropriate feedback to line managers. There will be line management responsibility, previous experience is desirable Essential skills: Strong knowledge of Power Platform components (Power Apps/Power Automate/Power BI/Microsoft Co-pilot Studio) Some Scripting or programming knowledge (eg C#, ASP.NET, Ruby, Java, Python, Power Fx, JavaScript) Experience of implementing and managing Power Platform components and infrastructure solutions and administration tasks within the Power Platform environment. Experience of optimising power apps to increase performance Evidence of planning and managing significant technical change. Effective communication skills, including the ability to interact and build working relationships with stakeholders. Location Expectation is to be working from the Plymouth office 60% of your time across the month (typically 3 days/week). Benefits Alongside your salary of circa £62,000 HM Land Registry contributes £9,881 towards you being a member of the Civil Service Defined Benefit Pension scheme and the following benefits: Annual leave of 28.5 days' paid holiday during each holiday year plus 8 days public holidays Personalised training and development plans including expensed accreditations with training days set aside Flexi-time scheme (You decide what working hours work best for you) Attractive pension options inc. 28% Civil Service Pension contribution Social and sports club Access to our employee assistance programme for counselling and support on a wide range of issues Interest-free loan for season tickets Cycle to work scheme (salary sacrifice). HMLR have a strong and positive culture, a commitment to inclusivity, an emphasis on continuous learning and development and flexible ways of working. Further information This role requires SC clearance, a condition of which is to have been present in the UK for 5 out of the past 5 years. This posy may include participation in an on-call rota, subject to additional pay.
Soldering Technician Hedge End, Southampton (Onsite working) £30,000 to £35,000 per year (plus company benefits) The Opportunity: ISR are recruiting for an international technology company who are currently looking for a Soldering Technician to join their Southampton based team. The ideal candidate will have experience working with surface mount technology (SMT) and through-hole components, as well as having used multimeters and oscilloscopes in a production environment. This role offers a long term career opportunity for someone who is looking for a stable and supportive environment, as well as the opportunity to gain training in fault finding PCBs to component level. Role and Responsibilities: Work with surface mount technology (SMT) and through-hole components Use electrical and hand tools to solder electronic components. Follow technical drawings and instructions to complete soldering tasks. Test and inspect finished products to ensure they meet quality standards. Troubleshoot and repair defective products as needed. Cutting, stripping and soldering cables into PCB's This position requires a candidate who has strong attention to detail, good hand-eye coordination and a methodical approach to work. If you have a passion for electronics and possess the required soldering skills we'd be keen to discuss the role and your suitability in more detail. Applications: To hear more about our client and this opportunity working as a Soldering Technician based in Hedge End, Southampton: please call James Sample at ISR Recruitment or please send me your latest CV or online profile for an immediate call back.
26/04/2024
Full time
Soldering Technician Hedge End, Southampton (Onsite working) £30,000 to £35,000 per year (plus company benefits) The Opportunity: ISR are recruiting for an international technology company who are currently looking for a Soldering Technician to join their Southampton based team. The ideal candidate will have experience working with surface mount technology (SMT) and through-hole components, as well as having used multimeters and oscilloscopes in a production environment. This role offers a long term career opportunity for someone who is looking for a stable and supportive environment, as well as the opportunity to gain training in fault finding PCBs to component level. Role and Responsibilities: Work with surface mount technology (SMT) and through-hole components Use electrical and hand tools to solder electronic components. Follow technical drawings and instructions to complete soldering tasks. Test and inspect finished products to ensure they meet quality standards. Troubleshoot and repair defective products as needed. Cutting, stripping and soldering cables into PCB's This position requires a candidate who has strong attention to detail, good hand-eye coordination and a methodical approach to work. If you have a passion for electronics and possess the required soldering skills we'd be keen to discuss the role and your suitability in more detail. Applications: To hear more about our client and this opportunity working as a Soldering Technician based in Hedge End, Southampton: please call James Sample at ISR Recruitment or please send me your latest CV or online profile for an immediate call back.
Field Engineer- English Speaking location Littau,Switzerland General aim of the position - Install/integrate and maintain telecommunication and infrastructure equipments in the wireless and Wireline networks within the assigned geographical area; - Daily travel to customers' network sites to perform tasks in the areas fulfilment, assurance and preventive maintenance; - Participate in oncall service rota. Main tasks Assurance - Follow troubleshooting procedures with the support from NOC and restore network services within the defined SLA; - Use the available tools and perform measurements to isolate and fix the faults; - Replace faulty equipment parts and perform functional tests to validate the troubleshooting results; - Implement temporary solutions whenever appropriate to help faster service restoration; - Log all actions and update the current status into the trouble ticketing tools; - Follow the spare part handling processes; - Support risk assessment activities when required; - Participate in 24x7 oncall rota. Fulfilment - Implement work orders, perform equipment installation, activation, site integration and testing within the defined SLA; - Record the implementation results into the corresponding tools, fill in service reports; - Activate the services and changes in the network together with NOC and/or customer DSS; - Notify and update NOC and/or customer DSS with the status of the changes during implementation; Preventive Maintenance - Perform preventive maintenance activities within the defined SLA; - Follow the preventive maintenance guidelines; - Perform site audits; - Resolve any issues and deficiencies found on site, including the ones discovered during site visits. - Support the Field Technician for complex tasks; - Member of project teams within Field Services. Required competencies - willingness to travel on a daily basis; - solid understanding of security and safety rules and standards; - not afraid to climb on masts and towers; - Education: recognised apprenticeship in the electrical or telecom area (eg electrician, electronician, multimedia technician, ) advanced education in telecom technologies (eg. telematician) is an advantage. Please send your CVS to: (see below)
26/04/2024
Full time
Field Engineer- English Speaking location Littau,Switzerland General aim of the position - Install/integrate and maintain telecommunication and infrastructure equipments in the wireless and Wireline networks within the assigned geographical area; - Daily travel to customers' network sites to perform tasks in the areas fulfilment, assurance and preventive maintenance; - Participate in oncall service rota. Main tasks Assurance - Follow troubleshooting procedures with the support from NOC and restore network services within the defined SLA; - Use the available tools and perform measurements to isolate and fix the faults; - Replace faulty equipment parts and perform functional tests to validate the troubleshooting results; - Implement temporary solutions whenever appropriate to help faster service restoration; - Log all actions and update the current status into the trouble ticketing tools; - Follow the spare part handling processes; - Support risk assessment activities when required; - Participate in 24x7 oncall rota. Fulfilment - Implement work orders, perform equipment installation, activation, site integration and testing within the defined SLA; - Record the implementation results into the corresponding tools, fill in service reports; - Activate the services and changes in the network together with NOC and/or customer DSS; - Notify and update NOC and/or customer DSS with the status of the changes during implementation; Preventive Maintenance - Perform preventive maintenance activities within the defined SLA; - Follow the preventive maintenance guidelines; - Perform site audits; - Resolve any issues and deficiencies found on site, including the ones discovered during site visits. - Support the Field Technician for complex tasks; - Member of project teams within Field Services. Required competencies - willingness to travel on a daily basis; - solid understanding of security and safety rules and standards; - not afraid to climb on masts and towers; - Education: recognised apprenticeship in the electrical or telecom area (eg electrician, electronician, multimedia technician, ) advanced education in telecom technologies (eg. telematician) is an advantage. Please send your CVS to: (see below)
Optical Technician - Leicestershire (up to 30k) Hours: 07.30 - 16.00 Monday to Friday (15.00 finish on a Friday). In the near future, the rota will be changing to: 06.00 - 14.00/14.00 - 22.00. You must be happy to work to the new shift pattern. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Key Responsibilities Ability to measure and assess work on the appropriate spectrophotometers. Ability to identify coating problems and defects such as spatter, striae, delamination, lint marks, comet marks etcand understand the possible causes and know the type of action to take to avoid their occurrence. Examine work prior to coating and be satisfied it is fit to coat. Be able to load optics safely and maintain their cleanliness. Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. Determines the appropriate test pieces to load into a run to maximise efficiencies and adherence to Quality schedules, is capable of measuring witness pieces to produce customer copies, this will involve familiarity with quality plans, drawings, and sales orders. Possess the ability to identify and carry out routine preventative maintenance of critical process control features. The Engineer would have developed/will develop; sufficient experience and expertise to minimise and gauge the necessity for test runs Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002 Read and understands all prints and specifications for optical coatings and checks desired specification. Education/Qualifications Skills: Qualifications in Mathematics and Physics at least to GCSE or A level A good understanding of optical manufacture A good engineering backgrounds Able to perform simple arithmetic tasks with calculator Computer literacy, including familiarity with Excel and Word Physical Demands: This will involve physical activities such as transporting optics to and from the coating department. SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
25/04/2024
Full time
Optical Technician - Leicestershire (up to 30k) Hours: 07.30 - 16.00 Monday to Friday (15.00 finish on a Friday). In the near future, the rota will be changing to: 06.00 - 14.00/14.00 - 22.00. You must be happy to work to the new shift pattern. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Key Responsibilities Ability to measure and assess work on the appropriate spectrophotometers. Ability to identify coating problems and defects such as spatter, striae, delamination, lint marks, comet marks etcand understand the possible causes and know the type of action to take to avoid their occurrence. Examine work prior to coating and be satisfied it is fit to coat. Be able to load optics safely and maintain their cleanliness. Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. Determines the appropriate test pieces to load into a run to maximise efficiencies and adherence to Quality schedules, is capable of measuring witness pieces to produce customer copies, this will involve familiarity with quality plans, drawings, and sales orders. Possess the ability to identify and carry out routine preventative maintenance of critical process control features. The Engineer would have developed/will develop; sufficient experience and expertise to minimise and gauge the necessity for test runs Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002 Read and understands all prints and specifications for optical coatings and checks desired specification. Education/Qualifications Skills: Qualifications in Mathematics and Physics at least to GCSE or A level A good understanding of optical manufacture A good engineering backgrounds Able to perform simple arithmetic tasks with calculator Computer literacy, including familiarity with Excel and Word Physical Demands: This will involve physical activities such as transporting optics to and from the coating department. SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
Service Desk Manager - German Speaker - Permanent - Prague Robson Bale are looking for a German Speaking Service Desk Manager to come on board for a permanent opportunity in Prague. Permanent, Excellent salary Key Responsibilities: Lead and oversee the day-to-day operations of the service desk organization, including the enablement and coaching of service coordinators. Support the development and implementation of strategies to scale the service desk organization in line with the increasing volume of mandates and customer requirements. Collaborate with stakeholders to define service desk structure, processes, and service level agreements (SLAs) tailored to the needs of different customers. Manage and mentor a diverse, partly decentralized team of IT support technicians in multiple countries, fostering a culture of continuous improvement and process orientation. Monitor and manage performance metrics for the service desk organization, identifying areas for improvement and implementing corrective actions as necessary. Coordinate with other IT teams and departments to ensure seamless integration of service desk operations with broader IT service delivery. Stay up-to-date of emerging technologies and industry trends related to IT service desk and in IT service management, incorporating relevant innovations into service desk operations. Actively participate in hiring process of new team members and help evolve the evaluation and testing process for new hires Schedule shift rotations for different service desk services including 24/7 Requirements Proven experience in managing service desk operations, with a focus on structuring organizations for growth and scalability. Experience with leading a large 20+ shared service desk team Demonstrated ability to lead teams in a dynamic and fast-paced environment. Solid understanding of regulatory environments, eg in the pharmaceutical sector, to ensure compliance in IT service delivery. Strong understanding of IT service management principles and frameworks, with ITIL certification preferred. Excellent communication and stakeholder management skills, with fluency in English and German, Czech is a bonus. Experience with service desk tools and technologies for ticket management, service desk telephony and shift planning (eg ServiceDesk Plus, ServiceNow, Inopla). Proven track record of driving process improvements and delivering measurable results in service desk operations. Permanent, Excellent salary Service Desk Manager - German Speaker - Permanent - Prague
25/04/2024
Full time
Service Desk Manager - German Speaker - Permanent - Prague Robson Bale are looking for a German Speaking Service Desk Manager to come on board for a permanent opportunity in Prague. Permanent, Excellent salary Key Responsibilities: Lead and oversee the day-to-day operations of the service desk organization, including the enablement and coaching of service coordinators. Support the development and implementation of strategies to scale the service desk organization in line with the increasing volume of mandates and customer requirements. Collaborate with stakeholders to define service desk structure, processes, and service level agreements (SLAs) tailored to the needs of different customers. Manage and mentor a diverse, partly decentralized team of IT support technicians in multiple countries, fostering a culture of continuous improvement and process orientation. Monitor and manage performance metrics for the service desk organization, identifying areas for improvement and implementing corrective actions as necessary. Coordinate with other IT teams and departments to ensure seamless integration of service desk operations with broader IT service delivery. Stay up-to-date of emerging technologies and industry trends related to IT service desk and in IT service management, incorporating relevant innovations into service desk operations. Actively participate in hiring process of new team members and help evolve the evaluation and testing process for new hires Schedule shift rotations for different service desk services including 24/7 Requirements Proven experience in managing service desk operations, with a focus on structuring organizations for growth and scalability. Experience with leading a large 20+ shared service desk team Demonstrated ability to lead teams in a dynamic and fast-paced environment. Solid understanding of regulatory environments, eg in the pharmaceutical sector, to ensure compliance in IT service delivery. Strong understanding of IT service management principles and frameworks, with ITIL certification preferred. Excellent communication and stakeholder management skills, with fluency in English and German, Czech is a bonus. Experience with service desk tools and technologies for ticket management, service desk telephony and shift planning (eg ServiceDesk Plus, ServiceNow, Inopla). Proven track record of driving process improvements and delivering measurable results in service desk operations. Permanent, Excellent salary Service Desk Manager - German Speaker - Permanent - Prague
Coating Technician, Full-Time on-site in Leicestershire. Up to £29K Plus Shift Allowance (Shift Pattern: 06.00 - 14.00/14.00 - 22.00 - Monday - Friday). Possible weekend requirement. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Mission: To assist the coating department by using optical technological knowledge to help with production requirements to meet on-time-delivery requirements Yield expectations. To stay competitive within the current market and to assist in new product development. To make recommendations for continuous process improvements and may instigate relevant development activity. Key Responsibilities Ability to measure and assess work on the appropriate spectrophotometers. Ability to identify potential coating problems in process' and take appropriate corrective action. Ability to identify coating defects such as spatter, striae, delamination, lint marks, comet marks etc. and understand the possible causes and know the type of action to take to avoid their occurrence. Possesses a thorough understanding of relevant Surface Quality Specifications and how the above relates to them. Examine work prior to coating and be satisfied it is fit to coat. Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. Determines the appropriate test pieces to load into a run to maximise efficiencies and adherence to Quality schedules, is capable of measuring witness pieces to produce customer copies,' this will involve familiarity with quality plans, drawings, and sales orders. Capable of stripping optics safely, observing Local Health and Safety rules. Identify potential problems with the coating plant/measuring equipment and alert the appropriate support staff. Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002. Competent to train colleagues on various aspects of the coating department. Education, Skills Abilities: Qualifications in Mathematics and Physics at least to GCSE or A level Computer literacy, including familiarity with Excel and Word The ability to analyse situations and results A good understanding of optical manufacture A good engineering background Physical Demands: This will involve physical activities such as transporting optics to and from the coating department. SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
24/04/2024
Full time
Coating Technician, Full-Time on-site in Leicestershire. Up to £29K Plus Shift Allowance (Shift Pattern: 06.00 - 14.00/14.00 - 22.00 - Monday - Friday). Possible weekend requirement. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Mission: To assist the coating department by using optical technological knowledge to help with production requirements to meet on-time-delivery requirements Yield expectations. To stay competitive within the current market and to assist in new product development. To make recommendations for continuous process improvements and may instigate relevant development activity. Key Responsibilities Ability to measure and assess work on the appropriate spectrophotometers. Ability to identify potential coating problems in process' and take appropriate corrective action. Ability to identify coating defects such as spatter, striae, delamination, lint marks, comet marks etc. and understand the possible causes and know the type of action to take to avoid their occurrence. Possesses a thorough understanding of relevant Surface Quality Specifications and how the above relates to them. Examine work prior to coating and be satisfied it is fit to coat. Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. Determines the appropriate test pieces to load into a run to maximise efficiencies and adherence to Quality schedules, is capable of measuring witness pieces to produce customer copies,' this will involve familiarity with quality plans, drawings, and sales orders. Capable of stripping optics safely, observing Local Health and Safety rules. Identify potential problems with the coating plant/measuring equipment and alert the appropriate support staff. Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002. Competent to train colleagues on various aspects of the coating department. Education, Skills Abilities: Qualifications in Mathematics and Physics at least to GCSE or A level Computer literacy, including familiarity with Excel and Word The ability to analyse situations and results A good understanding of optical manufacture A good engineering background Physical Demands: This will involve physical activities such as transporting optics to and from the coating department. SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
Engineering Lab Technician - Up to £32,000 per year with Bonus and 6% Pension Contributions. Flexible start finish times. As a Lab Technician you will work in our Test Laboratory which is located at our UK manufacturing plant in Parham, Suffolk. You will support the Research and Development team, working alongside the Product Designers, Application Engineers and Quality team, taking responsibility and ownership for the care and maintenance of the equipment in the test lab, as well as maintaining a clean and tidy work environment, preparing samples for mechanical and environmental testing, undertaking the tests and recording the results. To periodically audit and inspect the performance and attributes of finished products, both made by us and competing products. The role will report into the Director of Research and Development. In return we offer a salary in the range of £25,000 to £32,000 p.a., a discretionary bonus scheme as well as 25 days holiday (plus bank holidays). You will also receive a generous pension scheme, life assurance as well as the chance to take up other benefits including Health Insurance, cycle to work scheme, an employee assistance program, paid time off for volunteer work, plus many others. You will make an impact in the following way: You will be planning, setting up and undertaking controlled tests and trials in accordance with internal Belden Broadband Solutions and international standards. As well as development and management of test procedures and standards. To ensure that all tests and trials are recorded and reported accurately by documenting and presenting results and conclusions of all trials and experience to cross functional teams across Belden. Provide technical support on New Product Development projects. Manage or liaise with 3rd party test houses during outsourced testing. To carry out investigations in a methodical and controlled manner using root-cause investigation into quality issues. Including workmanship, assembly methods, mechanical design and non-conforming material. What you will bring: Experience of working in a manufacturing industry for +3 years is an advantage Experience working in a Test Lab environment within a team English, Mathematics and Sciences GCSEs or equivalent Preferably HNC or BEng Degree in a related discipline. Some physics as a minimum, to understand energy/force/mechanical/environmental aspects of testing. Need to have experience following set instructions/processes and be able to produce reports and collate information/data.
24/04/2024
Full time
Engineering Lab Technician - Up to £32,000 per year with Bonus and 6% Pension Contributions. Flexible start finish times. As a Lab Technician you will work in our Test Laboratory which is located at our UK manufacturing plant in Parham, Suffolk. You will support the Research and Development team, working alongside the Product Designers, Application Engineers and Quality team, taking responsibility and ownership for the care and maintenance of the equipment in the test lab, as well as maintaining a clean and tidy work environment, preparing samples for mechanical and environmental testing, undertaking the tests and recording the results. To periodically audit and inspect the performance and attributes of finished products, both made by us and competing products. The role will report into the Director of Research and Development. In return we offer a salary in the range of £25,000 to £32,000 p.a., a discretionary bonus scheme as well as 25 days holiday (plus bank holidays). You will also receive a generous pension scheme, life assurance as well as the chance to take up other benefits including Health Insurance, cycle to work scheme, an employee assistance program, paid time off for volunteer work, plus many others. You will make an impact in the following way: You will be planning, setting up and undertaking controlled tests and trials in accordance with internal Belden Broadband Solutions and international standards. As well as development and management of test procedures and standards. To ensure that all tests and trials are recorded and reported accurately by documenting and presenting results and conclusions of all trials and experience to cross functional teams across Belden. Provide technical support on New Product Development projects. Manage or liaise with 3rd party test houses during outsourced testing. To carry out investigations in a methodical and controlled manner using root-cause investigation into quality issues. Including workmanship, assembly methods, mechanical design and non-conforming material. What you will bring: Experience of working in a manufacturing industry for +3 years is an advantage Experience working in a Test Lab environment within a team English, Mathematics and Sciences GCSEs or equivalent Preferably HNC or BEng Degree in a related discipline. Some physics as a minimum, to understand energy/force/mechanical/environmental aspects of testing. Need to have experience following set instructions/processes and be able to produce reports and collate information/data.
Optical Technician Hours: Monday to Friday - 07.30 - 16.00 (15.00 on a Friday). In the near future, the shift pattern will be changing to: 06.00 - 14.00/14.00 - 22.00. You must be happy to work to the new shift pattern. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Mission : To assist the coating department by using optical technological knowledge to help with production requirements to meet on-time-delivery requirements Yield expectations. To stay competitive within the current market and to assist in new product development. Key Responsibilities Ability to measure and assess work on the appropriate spectrophotometers. Ability to identify coating problems and defects such as spatter, striae, delamination, lint marks, comet marks etcand understand the possible causes and know the type of action to take to avoid their occurrence. Examine work prior to coating and be satisfied it is fit to coat. Be able to load optics safely and maintain their cleanliness. Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. Determines the appropriate test pieces to load into a run to maximise efficiencies and adherence to Quality schedules, is capable of measuring witness pieces to produce customer copies, this will involve familiarity with quality plans, drawings, and sales orders. Possess the ability to identify and carry out routine preventative maintenance of critical process control features. The Engineer would have developed/will develop; sufficient experience and expertise to minimise and gauge the necessity for test runs Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002 Read and understands all prints and specifications for optical coatings and checks desired specification. Education/Qualifications Skills: Qualifications in Mathematics and Physics at least to GCSE or A level A good understanding of optical manufacture A good engineering backgrounds Able to perform simple arithmetic tasks with calculator Computer literacy, including familiarity with Excel and Word Physical Demands: This will involve physical activities such as transporting optics to and from the coating department. SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
23/04/2024
Full time
Optical Technician Hours: Monday to Friday - 07.30 - 16.00 (15.00 on a Friday). In the near future, the shift pattern will be changing to: 06.00 - 14.00/14.00 - 22.00. You must be happy to work to the new shift pattern. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Mission : To assist the coating department by using optical technological knowledge to help with production requirements to meet on-time-delivery requirements Yield expectations. To stay competitive within the current market and to assist in new product development. Key Responsibilities Ability to measure and assess work on the appropriate spectrophotometers. Ability to identify coating problems and defects such as spatter, striae, delamination, lint marks, comet marks etcand understand the possible causes and know the type of action to take to avoid their occurrence. Examine work prior to coating and be satisfied it is fit to coat. Be able to load optics safely and maintain their cleanliness. Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. Determines the appropriate test pieces to load into a run to maximise efficiencies and adherence to Quality schedules, is capable of measuring witness pieces to produce customer copies, this will involve familiarity with quality plans, drawings, and sales orders. Possess the ability to identify and carry out routine preventative maintenance of critical process control features. The Engineer would have developed/will develop; sufficient experience and expertise to minimise and gauge the necessity for test runs Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002 Read and understands all prints and specifications for optical coatings and checks desired specification. Education/Qualifications Skills: Qualifications in Mathematics and Physics at least to GCSE or A level A good understanding of optical manufacture A good engineering backgrounds Able to perform simple arithmetic tasks with calculator Computer literacy, including familiarity with Excel and Word Physical Demands: This will involve physical activities such as transporting optics to and from the coating department. SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
Lead AV Engineer We're seeking a proactive AV Engineer to join a engaging team and ensure seamless on-site installations and client satisfaction. If you're passionate about delivering top-quality service and have a knack for technical intricacies, this role is for you. Key Responsibilities: Execute on-site installations, ensuring impeccable integration of Company-deployed equipment and other manufacturer products when necessary. Perform comprehensive commissioning of all equipment at client sites. Conduct client training sessions to ensure smooth operation and understanding of installed systems. Duties: Oversee on-site installations to ensure they meet the highest quality standards and exceed client expectations. Manage tasks on-site, coordinating with the Project Manager to ensure timely completion of projects. Adhere to quality control procedures during equipment testing, delivery, installation, and commissioning. Develop a deep understanding of deployed systems and client environments to facilitate efficient site visits. Verify equipment against delivery notes and conduct commissioning tests to ensure proper functionality. Provide user training sessions as needed. Offer technical support services, including helpdesk assistance and on-site troubleshooting. Maintain strict adherence to safety protocols and best practices. Stay updated on the Company's solutions and services portfolio. Obtain relevant qualifications and certifications required by the Company, including health and safety certifications, AVIXA CTS, and manufacturer product certifications. Assist the sales team with technical advice and activities. Perform additional duties as directed by management. This is an excellent opportunity for a positive engaging Audio Visual Engineer who is seeking skill and role development. If you're ready to contribute to a dynamic team and play a crucial role in ensuring client satisfaction, apply now to join our team as an Installation and Commissioning Technician
23/04/2024
Full time
Lead AV Engineer We're seeking a proactive AV Engineer to join a engaging team and ensure seamless on-site installations and client satisfaction. If you're passionate about delivering top-quality service and have a knack for technical intricacies, this role is for you. Key Responsibilities: Execute on-site installations, ensuring impeccable integration of Company-deployed equipment and other manufacturer products when necessary. Perform comprehensive commissioning of all equipment at client sites. Conduct client training sessions to ensure smooth operation and understanding of installed systems. Duties: Oversee on-site installations to ensure they meet the highest quality standards and exceed client expectations. Manage tasks on-site, coordinating with the Project Manager to ensure timely completion of projects. Adhere to quality control procedures during equipment testing, delivery, installation, and commissioning. Develop a deep understanding of deployed systems and client environments to facilitate efficient site visits. Verify equipment against delivery notes and conduct commissioning tests to ensure proper functionality. Provide user training sessions as needed. Offer technical support services, including helpdesk assistance and on-site troubleshooting. Maintain strict adherence to safety protocols and best practices. Stay updated on the Company's solutions and services portfolio. Obtain relevant qualifications and certifications required by the Company, including health and safety certifications, AVIXA CTS, and manufacturer product certifications. Assist the sales team with technical advice and activities. Perform additional duties as directed by management. This is an excellent opportunity for a positive engaging Audio Visual Engineer who is seeking skill and role development. If you're ready to contribute to a dynamic team and play a crucial role in ensuring client satisfaction, apply now to join our team as an Installation and Commissioning Technician
Calling all BMS Engineer roles, based in London! (Looking for both a Service and/or Commissioning engineer) BMS Engineer Responsibilities: Testing and Commissioning: Conducting system tests, troubleshooting issues, and commissioning BMS systems to ensure proper functionality and performance. Maintenance and Upgrades: Performing regular maintenance, upgrades, and modifications to existing systems to improve efficiency and address issues. Documentation: Creating and maintaining documentation such as system diagrams, user manuals, and technical specifications. Collaboration: Working closely with other engineers, technicians, and stakeholders to ensure seamless integration of BMS with other building systems. Skills and Qualifications: Experience with building automation systems, BMS software, and control system design. Strong problem-solving skills and the ability to troubleshoot complex systems. Familiarity with HVAC, lighting, security, and other building systems. Attention to detail and ability to work independently and in a team. Certifications: Manufacturer-specific certifications for BMS systems (eg, Trend, Tridium, Siemens, Johnson Controls, Schneider). PACKAGE: £45,000 - £55,000 Company car/Allowance Pension Contribution
23/04/2024
Full time
Calling all BMS Engineer roles, based in London! (Looking for both a Service and/or Commissioning engineer) BMS Engineer Responsibilities: Testing and Commissioning: Conducting system tests, troubleshooting issues, and commissioning BMS systems to ensure proper functionality and performance. Maintenance and Upgrades: Performing regular maintenance, upgrades, and modifications to existing systems to improve efficiency and address issues. Documentation: Creating and maintaining documentation such as system diagrams, user manuals, and technical specifications. Collaboration: Working closely with other engineers, technicians, and stakeholders to ensure seamless integration of BMS with other building systems. Skills and Qualifications: Experience with building automation systems, BMS software, and control system design. Strong problem-solving skills and the ability to troubleshoot complex systems. Familiarity with HVAC, lighting, security, and other building systems. Attention to detail and ability to work independently and in a team. Certifications: Manufacturer-specific certifications for BMS systems (eg, Trend, Tridium, Siemens, Johnson Controls, Schneider). PACKAGE: £45,000 - £55,000 Company car/Allowance Pension Contribution
Mechanical Technician - up to £28 per hour Inside IR35 - 12 Months (extensions highly likely) Herefordshire - standard 37 hours - Fully Onsite Working (Free Parking).Apprenticeship and NVQ needed* One stage F2F interview with skills test - Sector: Aerospace and Defence Are you a skilled production professional seeking a challenging opportunity with a leading company in the manufacturing sector? We are currently looking for dedicated individuals to join the Operations team of Our client who is a renowned Aerospace company at the forefront of space exploration and travel. Daily tasks will include assembly and final assembly processes of aluminium composite panel manufacture. Responsibilities: * Able to insert panels with the correct type of mechanical fasteners. * Potting of inserts * Bonding of various brackets and equipment * Bonding of inserts, using various adhesives * Bonding components and sub-assemblies using adhesives to drawing specifications * Produce work to drawing specification * Ability to read and understand Detailed engineering drawings and procedures. * Awareness and adherence to all the company Health & Safety procedures * High tolerance requirements (typically better than 0.05mm in various areas). Essential: Previous experience in a Manual Handling Role Previous experience within a production/manufacturing environment with regular use of hand tools Ability to follow procedures and work instructions/manuals. Relevant experience in carbon fibre A relevant Apprenticeship or NVQ Desirable: Clean room environment experience Previous experience of laminating Aluminium Ability to read and interpret engineering drawings preferred
23/04/2024
Project-based
Mechanical Technician - up to £28 per hour Inside IR35 - 12 Months (extensions highly likely) Herefordshire - standard 37 hours - Fully Onsite Working (Free Parking).Apprenticeship and NVQ needed* One stage F2F interview with skills test - Sector: Aerospace and Defence Are you a skilled production professional seeking a challenging opportunity with a leading company in the manufacturing sector? We are currently looking for dedicated individuals to join the Operations team of Our client who is a renowned Aerospace company at the forefront of space exploration and travel. Daily tasks will include assembly and final assembly processes of aluminium composite panel manufacture. Responsibilities: * Able to insert panels with the correct type of mechanical fasteners. * Potting of inserts * Bonding of various brackets and equipment * Bonding of inserts, using various adhesives * Bonding components and sub-assemblies using adhesives to drawing specifications * Produce work to drawing specification * Ability to read and understand Detailed engineering drawings and procedures. * Awareness and adherence to all the company Health & Safety procedures * High tolerance requirements (typically better than 0.05mm in various areas). Essential: Previous experience in a Manual Handling Role Previous experience within a production/manufacturing environment with regular use of hand tools Ability to follow procedures and work instructions/manuals. Relevant experience in carbon fibre A relevant Apprenticeship or NVQ Desirable: Clean room environment experience Previous experience of laminating Aluminium Ability to read and interpret engineering drawings preferred