Senior Integration, Verification & Validation Engineer with extensive experience in design and development of Maritime Radar applications required for a Full time onsite contract in Abu Dhabi. Experience working to MilStd 810 and MilStd 461, is a plus. Responsibilities: - Work with senior system engineer to create system-level test procedures and scenarios for verifying new mode capabilities. - Test Environment enabling (test requirements assessment, budget, commission, set up) - Perform system integration, testing, data analysis, tactical simulations, updating of test procedures and generation of test reports. - Knowledgeable in Radar systems engineering and IV&V engineering principles. - Utilizes knowledge of RF systems and radar in general to verify the requirements allocated in DOORS or similar requirement tool. - Ability to follow test procedures and generate data for test reports. - Requirements management (DOORS) and interactions with multiple project contributors. - Conduct verification and validation via testing/analysis for environmental requirement such as temperature, vibration, EMC etc. - Planning and arrangement of engineering integration and testing. - Provide input to design process and support system testing activities. - Write/review environmental and functional requirement integration and verification plans. Experience & Skills - Knowledge of signal processing techniques and use of MATLAB (desirable). - Knowledgeable in Radar systems engineering and IV&V engineering principles - Specific knowledge of and experience working with Radar systems and/or subsystems: antenna, microwave, DSP, digital and electronics designs, environmental requirements, software. - Experience collaborating with other team leads and responsible for specific activities and progress on those activities will be monitored and tracked. - Proven Experience in test and design input for equipment with MilStd 810 and MilStd 461 requirements is a merit - Experience originating Systems Test plans and procedures for I&T, V&V, and unit/module procedures for Special Test Equipment. - Demonstrated experience working under structured IPDT process (Integrated Product Development Team). - Minimum 10 years experience in IV&V for the related products To arrange a Teams-based interview, please email in the first instance, your CV to (see below) WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
08/05/2024
Project-based
Senior Integration, Verification & Validation Engineer with extensive experience in design and development of Maritime Radar applications required for a Full time onsite contract in Abu Dhabi. Experience working to MilStd 810 and MilStd 461, is a plus. Responsibilities: - Work with senior system engineer to create system-level test procedures and scenarios for verifying new mode capabilities. - Test Environment enabling (test requirements assessment, budget, commission, set up) - Perform system integration, testing, data analysis, tactical simulations, updating of test procedures and generation of test reports. - Knowledgeable in Radar systems engineering and IV&V engineering principles. - Utilizes knowledge of RF systems and radar in general to verify the requirements allocated in DOORS or similar requirement tool. - Ability to follow test procedures and generate data for test reports. - Requirements management (DOORS) and interactions with multiple project contributors. - Conduct verification and validation via testing/analysis for environmental requirement such as temperature, vibration, EMC etc. - Planning and arrangement of engineering integration and testing. - Provide input to design process and support system testing activities. - Write/review environmental and functional requirement integration and verification plans. Experience & Skills - Knowledge of signal processing techniques and use of MATLAB (desirable). - Knowledgeable in Radar systems engineering and IV&V engineering principles - Specific knowledge of and experience working with Radar systems and/or subsystems: antenna, microwave, DSP, digital and electronics designs, environmental requirements, software. - Experience collaborating with other team leads and responsible for specific activities and progress on those activities will be monitored and tracked. - Proven Experience in test and design input for equipment with MilStd 810 and MilStd 461 requirements is a merit - Experience originating Systems Test plans and procedures for I&T, V&V, and unit/module procedures for Special Test Equipment. - Demonstrated experience working under structured IPDT process (Integrated Product Development Team). - Minimum 10 years experience in IV&V for the related products To arrange a Teams-based interview, please email in the first instance, your CV to (see below) WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
Flint are currently looking for a Network Coverage Planning Engineer for a long-term contract with one of the main Telco providers in the UK. 3 months rolling/Start date: ASAP/Bristol-Remote/£neg. based on experience Required skills & Experience: Strong experience with Antenna Design solution & Radio planning skills. Understanding of Network Coverage planning and the relation with Capacity. Understanding of Antenna Radio planning design and related deployment challenges. Understanding how to evaluate ICNIRP compliance and able to view/review a site Drawing. Ideally able to use ATOLL and QGIS tools.
08/05/2024
Project-based
Flint are currently looking for a Network Coverage Planning Engineer for a long-term contract with one of the main Telco providers in the UK. 3 months rolling/Start date: ASAP/Bristol-Remote/£neg. based on experience Required skills & Experience: Strong experience with Antenna Design solution & Radio planning skills. Understanding of Network Coverage planning and the relation with Capacity. Understanding of Antenna Radio planning design and related deployment challenges. Understanding how to evaluate ICNIRP compliance and able to view/review a site Drawing. Ideally able to use ATOLL and QGIS tools.
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
06/05/2024
Project-based
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
Position Available : RF Systems Engineer Location : Bristol - Dynamic Working Hours Salary : Up to £63,000 + Paid Overtime, Company Bonus & Very Good Pension Package Experience needed : Experience in RF, DSP, Antenna & Modelling and experience being involved with the full product life cycle from research and concept development to system design, integration, verification and validation. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Supplier Development Manager to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Designing and developing RF systems Participating in, or leading design reviews across the product life cycle. Coordinating the transition of development hardware into production, including environmental testing, qualification testing and design certification. System level functionality proving, Software/Firmware integration and proving. What we need from you: RF/Microwave systems knowledge Understanding of waveform design and implementation Requirements management and systems design Technical leadership of junior engineers System level RF modelling Antenna design and/or EM modelling Familiarity of Real Time Digital Signal Processing for high data bandwidth systems Systems modelling and Autocode generation experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
03/05/2024
Full time
Position Available : RF Systems Engineer Location : Bristol - Dynamic Working Hours Salary : Up to £63,000 + Paid Overtime, Company Bonus & Very Good Pension Package Experience needed : Experience in RF, DSP, Antenna & Modelling and experience being involved with the full product life cycle from research and concept development to system design, integration, verification and validation. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Supplier Development Manager to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Designing and developing RF systems Participating in, or leading design reviews across the product life cycle. Coordinating the transition of development hardware into production, including environmental testing, qualification testing and design certification. System level functionality proving, Software/Firmware integration and proving. What we need from you: RF/Microwave systems knowledge Understanding of waveform design and implementation Requirements management and systems design Technical leadership of junior engineers System level RF modelling Antenna design and/or EM modelling Familiarity of Real Time Digital Signal Processing for high data bandwidth systems Systems modelling and Autocode generation experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
ARM (Advanced Resource Managers)
Corsham, Wiltshire
Lead Mechanical Engineer (Assembly, Integration & Testing) Corsham 12-month contract Paying up to £45p/h (Umbrella) ARM have partnered with an Aerospace client who are looking for an experienced AIT engineer to work out of their manufacturing site based in Corsham. As the AIT Lead Engineer, you'll be responsible for leading the Mechanical team and ensuring all engineering concepts are delivered to the shop floor. Responsibilities: * Leading a team of AIT engineers on specific projects as well as planning the mechanical team's activities on a weekly basis. * Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A - E' * Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures, and test reports. * Control of all project MGSE, flight & support equipment * Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. * Alignment - producing test procedures and operating and maintaining optical alignment equipment. * Designing test equipment, overseeing its manufacture, and commissioning * Mechanical handling of spacecraft, instruments, payloads, solar arrays, antennas etc * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Install and validate test instrumentation. * Support propulsion testing * Handling and installation of thermal hardware * Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation associated with performing these tasks. * Pyrotechnic handling, installation, and safety * Plan and control the workload of the AIT team consisting of engineers and technicians. * Be able to travel overseas to work for short periods (typically 2-3 months, could be 6-7 months on occasions) * Be able to integrate quickly and easily into an AIT team. Experience required: * Appreciation of satellite integration processes and project phases * Use of SAP or other ERP System * Understanding of build documentation and the need for it * Driving build quality through review of processes and implementation of improvements * Managing a team during day-to-day activities ensuring work is completed on time and the correct standard. * Controlling and delivery of projects to budget and schedule * Face-to-face dealings with customers and suppliers * Worked in volatile, high-pressure environments to resolve technical and personnel conflicts. * Spacecraft Mechanical testing on prime projects is essential. * Leading other team members * Production of MGSE specs and operation of MGSE and flight HW * Production of high-quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
03/05/2024
Project-based
Lead Mechanical Engineer (Assembly, Integration & Testing) Corsham 12-month contract Paying up to £45p/h (Umbrella) ARM have partnered with an Aerospace client who are looking for an experienced AIT engineer to work out of their manufacturing site based in Corsham. As the AIT Lead Engineer, you'll be responsible for leading the Mechanical team and ensuring all engineering concepts are delivered to the shop floor. Responsibilities: * Leading a team of AIT engineers on specific projects as well as planning the mechanical team's activities on a weekly basis. * Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A - E' * Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures, and test reports. * Control of all project MGSE, flight & support equipment * Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. * Alignment - producing test procedures and operating and maintaining optical alignment equipment. * Designing test equipment, overseeing its manufacture, and commissioning * Mechanical handling of spacecraft, instruments, payloads, solar arrays, antennas etc * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Install and validate test instrumentation. * Support propulsion testing * Handling and installation of thermal hardware * Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation associated with performing these tasks. * Pyrotechnic handling, installation, and safety * Plan and control the workload of the AIT team consisting of engineers and technicians. * Be able to travel overseas to work for short periods (typically 2-3 months, could be 6-7 months on occasions) * Be able to integrate quickly and easily into an AIT team. Experience required: * Appreciation of satellite integration processes and project phases * Use of SAP or other ERP System * Understanding of build documentation and the need for it * Driving build quality through review of processes and implementation of improvements * Managing a team during day-to-day activities ensuring work is completed on time and the correct standard. * Controlling and delivery of projects to budget and schedule * Face-to-face dealings with customers and suppliers * Worked in volatile, high-pressure environments to resolve technical and personnel conflicts. * Spacecraft Mechanical testing on prime projects is essential. * Leading other team members * Production of MGSE specs and operation of MGSE and flight HW * Production of high-quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
ARM (Advanced Resource Managers)
Stevenage, Hertfordshire
Mechanical Engineer (Assembly, Integration & Testing) Stevenage 12-month contract Paying up to £35p/h (Umbrella) ARM has partnered with an Aerospace client who is looking for an experienced Mechanical Engineer (AIT) to work out of their manufacturing site based in Stevenage. As the AIT Mechanical Engineer, you'll be responsible for providing support on writing processes, plans, and procedures in 3D Experience for the production of Satellites and payloads. This includes supporting hardware assembly on the Satellites such as black boxes, Solar Array, and structure panels. Supporting Satellite environmental testing at the test facility. Responsibilities: * Support to the customization phase starting at the project kick-off. * Support project DMU (Digital mock-up/design for manufacture) sessions to ensure design for manufacture. * Lead the installation of Satellite appendages and applicable integration flows and preparation. * Oversee unit installation activities on the Satellite. * Support quality reviews, conduct PFMEA and Root Cause Analysis * Support in the creation of re-work instructions based on project requirements and identify parts and tooling required to carry them out. * Design of tooling/build aids for assembly execution * Support to R&D * Training module creation and maintenance. Experience required: * Minimum of HNC level in a Mechanical engineering discipline * Good planning skills and process competence, (MRP system experience an advantage) * Satellite Appendage installation process (Solar Array, reflectors, antennas, deployable systems). * Good understanding and detailed experience of complex mechanical systems. * Lean manufacturing techniques including 5S, root cause analysis, and continuous improvement. * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Handling and installation of thermal hardware (heaters, thermistors) * Mechanical integration of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation/process associated with performing these * Previous experience with payload builds is a distinct advantage. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
03/05/2024
Project-based
Mechanical Engineer (Assembly, Integration & Testing) Stevenage 12-month contract Paying up to £35p/h (Umbrella) ARM has partnered with an Aerospace client who is looking for an experienced Mechanical Engineer (AIT) to work out of their manufacturing site based in Stevenage. As the AIT Mechanical Engineer, you'll be responsible for providing support on writing processes, plans, and procedures in 3D Experience for the production of Satellites and payloads. This includes supporting hardware assembly on the Satellites such as black boxes, Solar Array, and structure panels. Supporting Satellite environmental testing at the test facility. Responsibilities: * Support to the customization phase starting at the project kick-off. * Support project DMU (Digital mock-up/design for manufacture) sessions to ensure design for manufacture. * Lead the installation of Satellite appendages and applicable integration flows and preparation. * Oversee unit installation activities on the Satellite. * Support quality reviews, conduct PFMEA and Root Cause Analysis * Support in the creation of re-work instructions based on project requirements and identify parts and tooling required to carry them out. * Design of tooling/build aids for assembly execution * Support to R&D * Training module creation and maintenance. Experience required: * Minimum of HNC level in a Mechanical engineering discipline * Good planning skills and process competence, (MRP system experience an advantage) * Satellite Appendage installation process (Solar Array, reflectors, antennas, deployable systems). * Good understanding and detailed experience of complex mechanical systems. * Lean manufacturing techniques including 5S, root cause analysis, and continuous improvement. * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Handling and installation of thermal hardware (heaters, thermistors) * Mechanical integration of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation/process associated with performing these * Previous experience with payload builds is a distinct advantage. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.