Job Title: Continuous Improvement Lead Industry: Medical Device Manufacturing Location: Plymouth Position Type: Permanent About The Company Join a pioneering team at a UK-based company specializing in advanced wound care and wound closure products. An organisation dedicated to developing and manufacturing world-leading solutions that enhance patient care. With a wealth of resources and specialized expertise, they offer a unique opportunity to be part of a team involved in every aspect of product design, development, and manufacture. Job Description Overview Responsible for all manufacturing processes, lean improvements, cost reduction, technical capability enhancement, process development, new production introduction delivering outputs in line with the business objectives on safety, quality, delivery, and cost. To execute site support activities and provide maintenance of all relevant operational equipment to ensure longevity and availability. Key Responsibilities Working closely alongside production operations to ensure the startup/shut down and continual running of all manufacturing processes. Establish & maintain standard processes within the validated process window plus optimisation of the technical performance for all manufacturing elements. Investigate and resolve issues related to the technical performance Optimize and deliver continuous improvement on existing manufacturing processes. Assist R&D with the introduction of new products and processes into manufacturing. Development of new standard processes and ensure optimal implementation into manufacturing supported with initial procedures, training and coaching of manufacturing. Collaborate with Group Engineering to execute or support assigned capital expenditure projects. Maintain all production equipment to the defined schedule and provide maintenance of the whole site requirements including, fire system testing/training, legionella checks, calibration, and contractor control. Qualifications Current experience in production environment support role (or 5 years min). Experience of developing and/or testing a process within a clean room manufacturing environment. Good understanding of Lean Principles (5S/VSM/Kaizen). Minimum of HNC level qualification in mechanical, electronic, industrial, or manufacturing engineering, or similar. Experience in process and product validation (sterile packaging according to ISO 11607 would be advantageous). Understanding of a quality management system (ISO13485/FDA) and medical device manufacturing advantageous. Very good MS Office skills, especially Excel. Strong organizational skills with the ability to communicate at all levels of the organization. Effective time management with the ability to set priorities. Good written and spoken English. Salary & Benefits Up to £45,000 per annum (Depending on Experience) Annual incentive bonus Life Cover Penson contribution up to 6% Dental Insurance Employee share scheme Other Information Exciting opportunity to lead a transformative project with significant organizational impact. Competitive salary package commensurate with experience. Opportunity to work with a dynamic and collaborative team focused on driving continuous improvement and excellence. How to Apply Apply now by submitting your CV below, alternatively you can send your CV. Please include "Continuous Improvement Lead" in the subject line
25/04/2024
Full time
Job Title: Continuous Improvement Lead Industry: Medical Device Manufacturing Location: Plymouth Position Type: Permanent About The Company Join a pioneering team at a UK-based company specializing in advanced wound care and wound closure products. An organisation dedicated to developing and manufacturing world-leading solutions that enhance patient care. With a wealth of resources and specialized expertise, they offer a unique opportunity to be part of a team involved in every aspect of product design, development, and manufacture. Job Description Overview Responsible for all manufacturing processes, lean improvements, cost reduction, technical capability enhancement, process development, new production introduction delivering outputs in line with the business objectives on safety, quality, delivery, and cost. To execute site support activities and provide maintenance of all relevant operational equipment to ensure longevity and availability. Key Responsibilities Working closely alongside production operations to ensure the startup/shut down and continual running of all manufacturing processes. Establish & maintain standard processes within the validated process window plus optimisation of the technical performance for all manufacturing elements. Investigate and resolve issues related to the technical performance Optimize and deliver continuous improvement on existing manufacturing processes. Assist R&D with the introduction of new products and processes into manufacturing. Development of new standard processes and ensure optimal implementation into manufacturing supported with initial procedures, training and coaching of manufacturing. Collaborate with Group Engineering to execute or support assigned capital expenditure projects. Maintain all production equipment to the defined schedule and provide maintenance of the whole site requirements including, fire system testing/training, legionella checks, calibration, and contractor control. Qualifications Current experience in production environment support role (or 5 years min). Experience of developing and/or testing a process within a clean room manufacturing environment. Good understanding of Lean Principles (5S/VSM/Kaizen). Minimum of HNC level qualification in mechanical, electronic, industrial, or manufacturing engineering, or similar. Experience in process and product validation (sterile packaging according to ISO 11607 would be advantageous). Understanding of a quality management system (ISO13485/FDA) and medical device manufacturing advantageous. Very good MS Office skills, especially Excel. Strong organizational skills with the ability to communicate at all levels of the organization. Effective time management with the ability to set priorities. Good written and spoken English. Salary & Benefits Up to £45,000 per annum (Depending on Experience) Annual incentive bonus Life Cover Penson contribution up to 6% Dental Insurance Employee share scheme Other Information Exciting opportunity to lead a transformative project with significant organizational impact. Competitive salary package commensurate with experience. Opportunity to work with a dynamic and collaborative team focused on driving continuous improvement and excellence. How to Apply Apply now by submitting your CV below, alternatively you can send your CV. Please include "Continuous Improvement Lead" in the subject line
We are currently looking on behalf of one of our important clients for a Team Lead Electrical Engineer (German Speaking). The role is a permanent position based in Bern Canton & comes with some home office flexibility. Your Role: Manage & support a team of six manufacturing technology specialists. Hold responsibility for the entire life cycle of high-voltage generators, including their development, production & adaptation to new requirements. Partake in the continuous improvement of manufacturing processes to ensure high quality & efficiency. Act as a point of contact for component management & finding solutions to problems with components & deliveries. Your Skills & Experience: At least 3 years of professional experience in Electrical Engineering within Industrial Environments. Skilled & experienced in Managing Projects. Ideally experienced in Leading Team (or very motivated to gain experience). Your Profile: Completed University Degree as an Electrical Engineer or similar & Training as an Electronics Technician, Automation Technician or Similar. Open, transparent & able to inspire others & work effectively within international environments. Fluent in English & German language skills to at least C1 Level is a mandatory requirement.
25/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Electrical Engineer (German Speaking). The role is a permanent position based in Bern Canton & comes with some home office flexibility. Your Role: Manage & support a team of six manufacturing technology specialists. Hold responsibility for the entire life cycle of high-voltage generators, including their development, production & adaptation to new requirements. Partake in the continuous improvement of manufacturing processes to ensure high quality & efficiency. Act as a point of contact for component management & finding solutions to problems with components & deliveries. Your Skills & Experience: At least 3 years of professional experience in Electrical Engineering within Industrial Environments. Skilled & experienced in Managing Projects. Ideally experienced in Leading Team (or very motivated to gain experience). Your Profile: Completed University Degree as an Electrical Engineer or similar & Training as an Electronics Technician, Automation Technician or Similar. Open, transparent & able to inspire others & work effectively within international environments. Fluent in English & German language skills to at least C1 Level is a mandatory requirement.
Coating Technician, Full-Time on-site in Leicestershire. Up to £29K Plus Shift Allowance (Shift Pattern: 06.00 - 14.00/14.00 - 22.00 - Monday - Friday). Possible weekend requirement. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Mission: To assist the coating department by using optical technological knowledge to help with production requirements to meet on-time-delivery requirements Yield expectations. To stay competitive within the current market and to assist in new product development. To make recommendations for continuous process improvements and may instigate relevant development activity. Key Responsibilities Ability to measure and assess work on the appropriate spectrophotometers. Ability to identify potential coating problems in process' and take appropriate corrective action. Ability to identify coating defects such as spatter, striae, delamination, lint marks, comet marks etc. and understand the possible causes and know the type of action to take to avoid their occurrence. Possesses a thorough understanding of relevant Surface Quality Specifications and how the above relates to them. Examine work prior to coating and be satisfied it is fit to coat. Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. Determines the appropriate test pieces to load into a run to maximise efficiencies and adherence to Quality schedules, is capable of measuring witness pieces to produce customer copies,' this will involve familiarity with quality plans, drawings, and sales orders. Capable of stripping optics safely, observing Local Health and Safety rules. Identify potential problems with the coating plant/measuring equipment and alert the appropriate support staff. Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002. Competent to train colleagues on various aspects of the coating department. Education, Skills Abilities: Qualifications in Mathematics and Physics at least to GCSE or A level Computer literacy, including familiarity with Excel and Word The ability to analyse situations and results A good understanding of optical manufacture A good engineering background Physical Demands: This will involve physical activities such as transporting optics to and from the coating department. SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
24/04/2024
Full time
Coating Technician, Full-Time on-site in Leicestershire. Up to £29K Plus Shift Allowance (Shift Pattern: 06.00 - 14.00/14.00 - 22.00 - Monday - Friday). Possible weekend requirement. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Mission: To assist the coating department by using optical technological knowledge to help with production requirements to meet on-time-delivery requirements Yield expectations. To stay competitive within the current market and to assist in new product development. To make recommendations for continuous process improvements and may instigate relevant development activity. Key Responsibilities Ability to measure and assess work on the appropriate spectrophotometers. Ability to identify potential coating problems in process' and take appropriate corrective action. Ability to identify coating defects such as spatter, striae, delamination, lint marks, comet marks etc. and understand the possible causes and know the type of action to take to avoid their occurrence. Possesses a thorough understanding of relevant Surface Quality Specifications and how the above relates to them. Examine work prior to coating and be satisfied it is fit to coat. Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. Determines the appropriate test pieces to load into a run to maximise efficiencies and adherence to Quality schedules, is capable of measuring witness pieces to produce customer copies,' this will involve familiarity with quality plans, drawings, and sales orders. Capable of stripping optics safely, observing Local Health and Safety rules. Identify potential problems with the coating plant/measuring equipment and alert the appropriate support staff. Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002. Competent to train colleagues on various aspects of the coating department. Education, Skills Abilities: Qualifications in Mathematics and Physics at least to GCSE or A level Computer literacy, including familiarity with Excel and Word The ability to analyse situations and results A good understanding of optical manufacture A good engineering background Physical Demands: This will involve physical activities such as transporting optics to and from the coating department. SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
Quality Engineer Coventry Full time Permanent Role Our client, a world-leading automotive engineering and manufacturing company based in Coventry, is looking to hire a Quality Engineer on a Full time permanent basis. This role presents an excellent opportunity to join the quality team of an innovative industry leader, which is equipped with state-of-the-art manufacturing technologies and processes. As the Quality Engineer, your core objective will be to ensure effective quality control throughout the manufacturing operations. Key duties and responsibilities include: Developing and implementing inspection plans, procedures, performance standards, and control methodologies to adhere to internal quality guidelines and industry regulations Conducting risk-based thinking assessments on operational processes to determine quality assurance requirements Performing process capability and analytical studies to identify areas for defect reduction and quality improvement Working closely with cross-functional teams including manufacturing, procurement, and suppliers to drive quality culture throughout the supply chain ecosystem Capturing, monitoring, and analysing quality data to identify trends and deviations from set targets Driving continuous improvement projects by employing methods like 8D problem-solving and Six Sigma Creating management reports and dashboards that communicate key quality metrics to senior leadership Staying current with advancements in quality engineering disciplines, inspection technologies, automation solutions etc. The ideal candidate will have hands-on experience working within quality-focused manufacturing operations, preferably in the automotive industry. You should also demonstrate sharp analytical abilities, communication skills, leadership qualities and a passion for devising quality assurance strategies. This is a fantastic opportunity to take on an important quality role within a pioneering mobility manufacturer. If you meet the above profile and are keen to apply, please send your CV to (see below)
23/04/2024
Full time
Quality Engineer Coventry Full time Permanent Role Our client, a world-leading automotive engineering and manufacturing company based in Coventry, is looking to hire a Quality Engineer on a Full time permanent basis. This role presents an excellent opportunity to join the quality team of an innovative industry leader, which is equipped with state-of-the-art manufacturing technologies and processes. As the Quality Engineer, your core objective will be to ensure effective quality control throughout the manufacturing operations. Key duties and responsibilities include: Developing and implementing inspection plans, procedures, performance standards, and control methodologies to adhere to internal quality guidelines and industry regulations Conducting risk-based thinking assessments on operational processes to determine quality assurance requirements Performing process capability and analytical studies to identify areas for defect reduction and quality improvement Working closely with cross-functional teams including manufacturing, procurement, and suppliers to drive quality culture throughout the supply chain ecosystem Capturing, monitoring, and analysing quality data to identify trends and deviations from set targets Driving continuous improvement projects by employing methods like 8D problem-solving and Six Sigma Creating management reports and dashboards that communicate key quality metrics to senior leadership Staying current with advancements in quality engineering disciplines, inspection technologies, automation solutions etc. The ideal candidate will have hands-on experience working within quality-focused manufacturing operations, preferably in the automotive industry. You should also demonstrate sharp analytical abilities, communication skills, leadership qualities and a passion for devising quality assurance strategies. This is a fantastic opportunity to take on an important quality role within a pioneering mobility manufacturer. If you meet the above profile and are keen to apply, please send your CV to (see below)
A new position of 'Production Engineer' has been created for a manufacturing business in Rhyl. There is significant untapped potential for improvement in the business and they want you to help them. As a forward-thinking Production Engineer, you will play a pivotal role in leading transformational efforts in New Product Introduction (NPI), Existing Product Development (EPD), and Lean Manufacturing. Key Focus Areas Include: 1. Lean Manufacturing: Implement lean manufacturing principles and practices. Establish a lean way of working for the site. Utilise lean tools and techniques such as Six Sigma, Kaizen, 5S, Value stream mapping to achieve operational excellence. 2. New Product Introduction (NPI): Collaborate closely with R&D throughout the entire NPI process. Proactively engage with R&D early in the development cycle to address potential manufacturing challenges. Bring modern thinking to the NPI process. 3. Existing Product Development (EPD): Optimise production processes for efficiency. Explore opportunities for automation. Drive continuous improvement in product development. Qualifications: Alongside the above, it's important you have experience using CAD ideally SolidWorks to support improvements in products where necessary. Manufacturing sector experience with a diverse range of manufacturing processes. Familiarity with Lean methodologies and certifications (eg, Six Sigma, process optimisation techniques). Background in multi-process manufacturing, with a focus on product development and improvement. If the role sounds like it could be a fit, please apply with an up to date CV and we will be in touch.
22/04/2024
Full time
A new position of 'Production Engineer' has been created for a manufacturing business in Rhyl. There is significant untapped potential for improvement in the business and they want you to help them. As a forward-thinking Production Engineer, you will play a pivotal role in leading transformational efforts in New Product Introduction (NPI), Existing Product Development (EPD), and Lean Manufacturing. Key Focus Areas Include: 1. Lean Manufacturing: Implement lean manufacturing principles and practices. Establish a lean way of working for the site. Utilise lean tools and techniques such as Six Sigma, Kaizen, 5S, Value stream mapping to achieve operational excellence. 2. New Product Introduction (NPI): Collaborate closely with R&D throughout the entire NPI process. Proactively engage with R&D early in the development cycle to address potential manufacturing challenges. Bring modern thinking to the NPI process. 3. Existing Product Development (EPD): Optimise production processes for efficiency. Explore opportunities for automation. Drive continuous improvement in product development. Qualifications: Alongside the above, it's important you have experience using CAD ideally SolidWorks to support improvements in products where necessary. Manufacturing sector experience with a diverse range of manufacturing processes. Familiarity with Lean methodologies and certifications (eg, Six Sigma, process optimisation techniques). Background in multi-process manufacturing, with a focus on product development and improvement. If the role sounds like it could be a fit, please apply with an up to date CV and we will be in touch.
Quality System Specialist (m/f/d) - systems administration/support of laboratory systems/Windows Server/Active Directory/Client operating systems/Computerized System Validation/Network topology/English & German Project : For our customer a big pharmaceutical company in Basel we are looking for a highly qualified Quality System Specialist (m/f/d). Background : Are you passionate about Information (IT) and Automation Technology (OT) and aspiring to make a meaningful impact? You are a customer focused individual with aspiration to deliver high quality support in a GMP Lab environment. We Make Medicines! Behind every product sold by Roche is Pharma Global Technical Operations (PT). Starting with Phase I of the development process and continuing through to product maturity, PT makes lifesaving medicines at 11 locations, with the support of partners from around the world. Information (IT) and Automation Technology (OT) teams are key in producing and delivering medicine to patients. The organization is currently undergoing a transformation towards digitalization, advancing fundamental elements to meet future needs, such as leveraging new technologies. You as a System Process Specialist (SPS) will be acting in the 1-Stop-Shop and are part of the support and continuous improvement structure. The System Process Specialist has a profound process understanding and is collaborating with the Business Community to continuously improve business processes and underlying IT Assess & Release applications. By this, he/she acts as a trusted adviser of the end-user/key-user as well as a bridge between the end user and other roles in the Informatics support layers. The SPS can raise incidents on behalf of the user area or work with Process Owner & other local business roles to train (key-)users. In projects, the System Process Specialist can also represent the interests of the systems user group and has the responsibility of coordinating and bringing input from the area of responsibility to the project and communicating project goals, information and progress back to the business areas. The perfect candidate: The perfect candidate is familiar with ITSM processes and support tools for incident and change management. Also we are looking for someone who works independently within guidelines while receiving minimal guidance. Tasks & Responsibilities: * End-User-Support Laboratory Systems * End to End accountability for Assess & Release System support * Responsible for Assess & Release System support * Responsible for 24/7 on-call, nights and weekends on a rotational basis * Personal contact person for Key and End User out of the business department * Log incident/requests into a ticket system for further processing * Triages, prioritizes incidents/requests and performs root cause analysis in problem management (handling issue, data issue, authorization issue, IT issue). * Resolves or forwards incidents/requests based on individual knowledge or knowledge articles * Coordination of End User groups and escalation management as required * Distributes application issues and non-application issues that cannot be solved by him/her, or based on catalog to the 2nd level support * Supports issue clarification on request of 2nd level support * Validate the resolution proposals and performs the necessary test in case tests are required on request of the 2nd level support * Cooperate with 2nd level support team during analysis of reported incidents * Communicating and coordination of End User activities if there is a major incident. Interface Monitoring (Business Errors) * Support Execution of system actions * Support Implementation of new Systems and Equipment * Continuous Improvement of Laboratory Systems * Regular exchange with the Support network and or Business Process Experts (BPE) on support cases, best practices and process improvement proposals with network relevance * Helps the End User to submit new ideas for process improvements, allowing a comprehensive approach for assessing both the process interdependencies as well impact to all underlying * systems. * Describes the full life cycle of an integrated Change process to Business Process with System impact. This Framework combines the Assessment of the requirement, build and test work as well as deployment and possibly delivery of the added value to the End User. * Support Processes & Tools for Laboratory Systems * Local Labsystem and Lab Equipment Bundle, Application Support for eg Cedex Bio, Cedex HiRes, SoloVPE, Cary WinUV * Local Support of Informatics Products eg Central Label Management Software, Nextlab, Labx, Labware, Smartline Data Cockpit, Unicorn * Use of Service Now for incident, problem, request and change management Must Haves: * Relevant completed apprenticeship in IT area or equivalent and/or ideally an advanced degree in the IT or automation field * 3+ years professional experience in complex business environments * Knowledge and experience in systems administration and support of laboratory systems * Knowledge and experience in Windows Server, Active Directory and Client operating systems * Knowledge and experience in Computerized System Validation * Knowledge and experience in Network topology * Fluency German and English is a must (spoken and written) * Good communication skills * Service oriented attitude, being able to communicate with our customers, also in emergency situations * Teamplayer Nice to Have: * Knowledge and experience in systems administration in the manufacturing area (eg MES, PI, SCADA, PCS) * Trainer skills, methodology skills to perform trainings for end-users in specific area (refresh and new) Reference Nr. : 923283SDA Role : Quality System Specialist (m/f/d) Industrie : Pharma Workplace : Basel Pensum : 100% onsite Start: 01.05.2024 (latest Start Date: 1.6.2024) Duration : 12 Deadline : 25.04.2024 If you are interested in this position, please send us your complete dossier via the link in this advertisement. About us: ITech Consult is an ISO 9001:2015 certified Swiss company with offices in Germany and Ireland. ITech Consult specialises in the placement of highly qualified candidates for recruitment in the fields of IT, Life Science & Engineering. We offer staff leasing & payroll services. For our candidates this is free of charge, also for Payroll we do not charge you any additional fees.
22/04/2024
Project-based
Quality System Specialist (m/f/d) - systems administration/support of laboratory systems/Windows Server/Active Directory/Client operating systems/Computerized System Validation/Network topology/English & German Project : For our customer a big pharmaceutical company in Basel we are looking for a highly qualified Quality System Specialist (m/f/d). Background : Are you passionate about Information (IT) and Automation Technology (OT) and aspiring to make a meaningful impact? You are a customer focused individual with aspiration to deliver high quality support in a GMP Lab environment. We Make Medicines! Behind every product sold by Roche is Pharma Global Technical Operations (PT). Starting with Phase I of the development process and continuing through to product maturity, PT makes lifesaving medicines at 11 locations, with the support of partners from around the world. Information (IT) and Automation Technology (OT) teams are key in producing and delivering medicine to patients. The organization is currently undergoing a transformation towards digitalization, advancing fundamental elements to meet future needs, such as leveraging new technologies. You as a System Process Specialist (SPS) will be acting in the 1-Stop-Shop and are part of the support and continuous improvement structure. The System Process Specialist has a profound process understanding and is collaborating with the Business Community to continuously improve business processes and underlying IT Assess & Release applications. By this, he/she acts as a trusted adviser of the end-user/key-user as well as a bridge between the end user and other roles in the Informatics support layers. The SPS can raise incidents on behalf of the user area or work with Process Owner & other local business roles to train (key-)users. In projects, the System Process Specialist can also represent the interests of the systems user group and has the responsibility of coordinating and bringing input from the area of responsibility to the project and communicating project goals, information and progress back to the business areas. The perfect candidate: The perfect candidate is familiar with ITSM processes and support tools for incident and change management. Also we are looking for someone who works independently within guidelines while receiving minimal guidance. Tasks & Responsibilities: * End-User-Support Laboratory Systems * End to End accountability for Assess & Release System support * Responsible for Assess & Release System support * Responsible for 24/7 on-call, nights and weekends on a rotational basis * Personal contact person for Key and End User out of the business department * Log incident/requests into a ticket system for further processing * Triages, prioritizes incidents/requests and performs root cause analysis in problem management (handling issue, data issue, authorization issue, IT issue). * Resolves or forwards incidents/requests based on individual knowledge or knowledge articles * Coordination of End User groups and escalation management as required * Distributes application issues and non-application issues that cannot be solved by him/her, or based on catalog to the 2nd level support * Supports issue clarification on request of 2nd level support * Validate the resolution proposals and performs the necessary test in case tests are required on request of the 2nd level support * Cooperate with 2nd level support team during analysis of reported incidents * Communicating and coordination of End User activities if there is a major incident. Interface Monitoring (Business Errors) * Support Execution of system actions * Support Implementation of new Systems and Equipment * Continuous Improvement of Laboratory Systems * Regular exchange with the Support network and or Business Process Experts (BPE) on support cases, best practices and process improvement proposals with network relevance * Helps the End User to submit new ideas for process improvements, allowing a comprehensive approach for assessing both the process interdependencies as well impact to all underlying * systems. * Describes the full life cycle of an integrated Change process to Business Process with System impact. This Framework combines the Assessment of the requirement, build and test work as well as deployment and possibly delivery of the added value to the End User. * Support Processes & Tools for Laboratory Systems * Local Labsystem and Lab Equipment Bundle, Application Support for eg Cedex Bio, Cedex HiRes, SoloVPE, Cary WinUV * Local Support of Informatics Products eg Central Label Management Software, Nextlab, Labx, Labware, Smartline Data Cockpit, Unicorn * Use of Service Now for incident, problem, request and change management Must Haves: * Relevant completed apprenticeship in IT area or equivalent and/or ideally an advanced degree in the IT or automation field * 3+ years professional experience in complex business environments * Knowledge and experience in systems administration and support of laboratory systems * Knowledge and experience in Windows Server, Active Directory and Client operating systems * Knowledge and experience in Computerized System Validation * Knowledge and experience in Network topology * Fluency German and English is a must (spoken and written) * Good communication skills * Service oriented attitude, being able to communicate with our customers, also in emergency situations * Teamplayer Nice to Have: * Knowledge and experience in systems administration in the manufacturing area (eg MES, PI, SCADA, PCS) * Trainer skills, methodology skills to perform trainings for end-users in specific area (refresh and new) Reference Nr. : 923283SDA Role : Quality System Specialist (m/f/d) Industrie : Pharma Workplace : Basel Pensum : 100% onsite Start: 01.05.2024 (latest Start Date: 1.6.2024) Duration : 12 Deadline : 25.04.2024 If you are interested in this position, please send us your complete dossier via the link in this advertisement. About us: ITech Consult is an ISO 9001:2015 certified Swiss company with offices in Germany and Ireland. ITech Consult specialises in the placement of highly qualified candidates for recruitment in the fields of IT, Life Science & Engineering. We offer staff leasing & payroll services. For our candidates this is free of charge, also for Payroll we do not charge you any additional fees.