We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
13/05/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
Candidate need to have below pointers in their CVs. Exp. with Hardware validation/Embedded. Somone who have tested HP server hardware/components Job Description Lead a team of engineers to support validation of Server and Storage devices Work with cross functional team to set priorities and handle escalations Identify areas for test coverage improvement, implement solutions Improve product quality and reliability of automated testing infrastructure Communicate with project stakeholders Team will be responsible for the following Automation of tests in Python Validating Servers and Storage devices/components in a large data center environment with 1000s of DUTs Build tools and automation to make testing and integration faster, simpler, and more effective in a Linux environment Develop and maintain unit tests for test automation Requirements 8+ years of industry experience in Server/Storage domain leading platform/component qualification in a Linux environment Hands on experience in troubleshooting failures in Linux to diagnose and root cause failures Excellent communication skills and proactive leadership Experience with test-driven software development Knowledge of test automation in Python and conduct code reviews and bug fixes Proactively create experiments and tooling to detect and diagnose hardware/firmware/software health issues and isolate the components/failure scenarios
09/05/2024
Project-based
Candidate need to have below pointers in their CVs. Exp. with Hardware validation/Embedded. Somone who have tested HP server hardware/components Job Description Lead a team of engineers to support validation of Server and Storage devices Work with cross functional team to set priorities and handle escalations Identify areas for test coverage improvement, implement solutions Improve product quality and reliability of automated testing infrastructure Communicate with project stakeholders Team will be responsible for the following Automation of tests in Python Validating Servers and Storage devices/components in a large data center environment with 1000s of DUTs Build tools and automation to make testing and integration faster, simpler, and more effective in a Linux environment Develop and maintain unit tests for test automation Requirements 8+ years of industry experience in Server/Storage domain leading platform/component qualification in a Linux environment Hands on experience in troubleshooting failures in Linux to diagnose and root cause failures Excellent communication skills and proactive leadership Experience with test-driven software development Knowledge of test automation in Python and conduct code reviews and bug fixes Proactively create experiments and tooling to detect and diagnose hardware/firmware/software health issues and isolate the components/failure scenarios
World Class Defence Organisation based in Portsmouth is currently looking to recruit a C++ Embedded Software Engineer subcontractor on an initial 6 month contract. Hourly Rate: £70.00 (Umbrella) Contract Duration: 6 months initially and then ongoing thereafter C++ Embedded Software Engineer Job Description: The team is undertaking the design and implementation of a satellite communications Software Defined Radio (SDR) modem. You will be part of a small multi-disciplinary team containing software, system, firmware and infrastructure engineers. There will be scope in the future to work on further developments as project needs arise. You will research and develop aspects of modem products and associated communications systems, using your experience in software within complex systems. Skills/Experience Required Essential experience with - Modern C++ software engineering for target Linux platforms to a high standard Developing using Eclipse CDT running on a Linux based operating system Device management interfaces (eg SNMP, Web) for design, implementation and test Git for version control Inter-process communication and techniques Unit and integration test tools (eg Google Test, Robot Framework) Atlassian toolset (eg Jira, Confluence, BitBucket) Desirable skills - Agile or Scrum working environment experience would be very beneficial System and software modelling tools such as Enterprise Architect (SysML/UML) User interface design, implementation and test using HTML, CSS and JavaScript Similar industries you could come from: Space Aerospace Communications Radar
08/05/2024
Project-based
World Class Defence Organisation based in Portsmouth is currently looking to recruit a C++ Embedded Software Engineer subcontractor on an initial 6 month contract. Hourly Rate: £70.00 (Umbrella) Contract Duration: 6 months initially and then ongoing thereafter C++ Embedded Software Engineer Job Description: The team is undertaking the design and implementation of a satellite communications Software Defined Radio (SDR) modem. You will be part of a small multi-disciplinary team containing software, system, firmware and infrastructure engineers. There will be scope in the future to work on further developments as project needs arise. You will research and develop aspects of modem products and associated communications systems, using your experience in software within complex systems. Skills/Experience Required Essential experience with - Modern C++ software engineering for target Linux platforms to a high standard Developing using Eclipse CDT running on a Linux based operating system Device management interfaces (eg SNMP, Web) for design, implementation and test Git for version control Inter-process communication and techniques Unit and integration test tools (eg Google Test, Robot Framework) Atlassian toolset (eg Jira, Confluence, BitBucket) Desirable skills - Agile or Scrum working environment experience would be very beneficial System and software modelling tools such as Enterprise Architect (SysML/UML) User interface design, implementation and test using HTML, CSS and JavaScript Similar industries you could come from: Space Aerospace Communications Radar
Senior Connectivity Firmware/Test Engineer 1 year freelance contract + extensions after Leuven, Belgium (2 days remote per week) Within our Personal Health R&D group, we want to capture the strong market growth in ICs for hearing aids and implants, hearables, wearables, and personal health monitoring applications, health IoT. Owing to our success, our department of 40+ engineers is growing, and we have challenging opportunities for software engineers. Our System-on-Chip products employ the latest Bluetooth Smart (BLE) or NFC with our experience in ultra-low power design. We develop the full software stack from driver-level all to way to turnkey applications, enabling our customers to build their products with minimum effort. Description of services: Unconditionally technically responsible for a subsystem, application Estimate the effort for your work and contribute to reviewing the estimates of peers Execute feasibility studies to underpin the estimations Create a design for the software Organize or contribute to (mutual) reviews of designs with colleagues and Software Architect Plan your assignments and report on progress Contribute to specifying and developing automated regression test frameworks. Document functional and performance specifications, test design documentation and develop the test strategy and test specifications. Work with the development team to develop and guide the implementation of module, systems and end to end tests (functional + performance testing) to fit in the test framework. Develop test automations using Python, Jenkins. Experience: Master's degree in Software Engineering or Electronics or, have reached this level through another form of training or experience. 3-5 years Embedded software/firmware development experience, in either the mobile industry or in semiconductors. Proud software craftsman with solid BLE 5.X experience, preferably in both Link Layer and Host stack Natural team player and obsessive to learn and gain experience Spoken and written English Knowledge of design methods and software engineering processes, Microcontroller architectures and peripherals, Embedded programming in C. Strong Python programming skills Building Real Time systems on bare metal or using an RTOS, structured debugging, interpretation of PCB schematics. Practical experience using the Scrum framework Experience in technical coaching of junior team members Additional context of the role: Idea is to find a candidate with a strong BLE knowledge. The work to be done is to develop the upper level (application level) of the BLE communication protocol stack which are not yet existing. To do this, knowledge/understanding/experience of the lower levels is absolutely necessary ( Link Layer and Host stack). The testing part of the job will be relatively limited to the beginning of the assignment. At that time 50% of the time should be spend within the R&D team which is currently struggling with the validation testing. Helping on this aspect will serve as an introduction to the product for the candidate. Finally, we want a senior profile as one of the tasks will be to lead the team in the "go to market strategy". The product till now is developed for use cases of specific customers but idea is to make it a mass product. The senior engineer should help here to identify what may be missing in the product to reach a broader audience, for example by comparison with competitors. This part will require again to interact with the R&D team.
07/05/2024
Project-based
Senior Connectivity Firmware/Test Engineer 1 year freelance contract + extensions after Leuven, Belgium (2 days remote per week) Within our Personal Health R&D group, we want to capture the strong market growth in ICs for hearing aids and implants, hearables, wearables, and personal health monitoring applications, health IoT. Owing to our success, our department of 40+ engineers is growing, and we have challenging opportunities for software engineers. Our System-on-Chip products employ the latest Bluetooth Smart (BLE) or NFC with our experience in ultra-low power design. We develop the full software stack from driver-level all to way to turnkey applications, enabling our customers to build their products with minimum effort. Description of services: Unconditionally technically responsible for a subsystem, application Estimate the effort for your work and contribute to reviewing the estimates of peers Execute feasibility studies to underpin the estimations Create a design for the software Organize or contribute to (mutual) reviews of designs with colleagues and Software Architect Plan your assignments and report on progress Contribute to specifying and developing automated regression test frameworks. Document functional and performance specifications, test design documentation and develop the test strategy and test specifications. Work with the development team to develop and guide the implementation of module, systems and end to end tests (functional + performance testing) to fit in the test framework. Develop test automations using Python, Jenkins. Experience: Master's degree in Software Engineering or Electronics or, have reached this level through another form of training or experience. 3-5 years Embedded software/firmware development experience, in either the mobile industry or in semiconductors. Proud software craftsman with solid BLE 5.X experience, preferably in both Link Layer and Host stack Natural team player and obsessive to learn and gain experience Spoken and written English Knowledge of design methods and software engineering processes, Microcontroller architectures and peripherals, Embedded programming in C. Strong Python programming skills Building Real Time systems on bare metal or using an RTOS, structured debugging, interpretation of PCB schematics. Practical experience using the Scrum framework Experience in technical coaching of junior team members Additional context of the role: Idea is to find a candidate with a strong BLE knowledge. The work to be done is to develop the upper level (application level) of the BLE communication protocol stack which are not yet existing. To do this, knowledge/understanding/experience of the lower levels is absolutely necessary ( Link Layer and Host stack). The testing part of the job will be relatively limited to the beginning of the assignment. At that time 50% of the time should be spend within the R&D team which is currently struggling with the validation testing. Helping on this aspect will serve as an introduction to the product for the candidate. Finally, we want a senior profile as one of the tasks will be to lead the team in the "go to market strategy". The product till now is developed for use cases of specific customers but idea is to make it a mass product. The senior engineer should help here to identify what may be missing in the product to reach a broader audience, for example by comparison with competitors. This part will require again to interact with the R&D team.
Exciting Opportunity for Embedded Design Engineer Are you a talented Embedded Design Engineer looking for a challenging and rewarding permanent position? Our client, a leading technology company, is seeking a skilled professional to join their dynamic team and contribute to the design and development of world-beating products. In this role, you will play a crucial part in supporting the UK-based Embedded team through an extremely busy period, juggling both New Product Development and delivering customer-funded projects based around existing product ranges. While the primary focus will be on Datalink products, you may also be asked to support other product lines within the company. Key responsibilities include: Designing firmware/software for processors and microcontrollers using Embedded C Developing solutions using Linux Creating firmware for FPGAs using VHDL/DSP Supporting production and manufacturing teams Troubleshooting firmware, software, and system issues Testing and debugging new and existing designs Creating comprehensive documentation, including requirement specifications, test plans, user information, and API documents The ideal candidate will have a minimum of 3 years of experience in an equivalent role and possess a strong skill set in C/C++, Embedded Linux, and FPGA development. Experience with DVB-T, datalink/radio technologies, video, and broadcast is a plus. A degree in electronics, computer science, or a related subject is desirable. Our client offers a competitive salary, excellent benefits, and a supportive work environment that encourages professional growth and development. If you're a self-motivated, enthusiastic team player with strong interpersonal skills and a desire to make an impact, we'd love to hear from you. Apply now and take the first step towards an exciting new chapter in your career!
07/05/2024
Full time
Exciting Opportunity for Embedded Design Engineer Are you a talented Embedded Design Engineer looking for a challenging and rewarding permanent position? Our client, a leading technology company, is seeking a skilled professional to join their dynamic team and contribute to the design and development of world-beating products. In this role, you will play a crucial part in supporting the UK-based Embedded team through an extremely busy period, juggling both New Product Development and delivering customer-funded projects based around existing product ranges. While the primary focus will be on Datalink products, you may also be asked to support other product lines within the company. Key responsibilities include: Designing firmware/software for processors and microcontrollers using Embedded C Developing solutions using Linux Creating firmware for FPGAs using VHDL/DSP Supporting production and manufacturing teams Troubleshooting firmware, software, and system issues Testing and debugging new and existing designs Creating comprehensive documentation, including requirement specifications, test plans, user information, and API documents The ideal candidate will have a minimum of 3 years of experience in an equivalent role and possess a strong skill set in C/C++, Embedded Linux, and FPGA development. Experience with DVB-T, datalink/radio technologies, video, and broadcast is a plus. A degree in electronics, computer science, or a related subject is desirable. Our client offers a competitive salary, excellent benefits, and a supportive work environment that encourages professional growth and development. If you're a self-motivated, enthusiastic team player with strong interpersonal skills and a desire to make an impact, we'd love to hear from you. Apply now and take the first step towards an exciting new chapter in your career!
Overview The role of Application Engineer is to develop engineering solutions using company products or board sets to meet customer needs. The role involves all aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires in-depth understanding of the functionality and use of the company's products and board sets and how to adapt them for new applications. It requires international travel. Duties and responsibilities Investigate requests for the development of solutions to meet customer applications, originating from customers or internally from Product Management. Undertake investigative / feasibility work to develop solutions. Plan and cost projects; provide information to Sales for quotation. Develop application solutions through developing new hardware and software, configuring products, and integrating 3rd party products. Test and maintain hardware and software, including release process, version control, and bug management. Write and maintain documentation for designs to describe functionality, use and reasons for design decisions. Perform acceptance testing of application solutions to verify correct operation, prior to release to the market. Resolve any issues found before providing to customers. Manage projects and work as a team member on projects; plan, track and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with people inside and outside the company, and coordinate other departments involved (such as R&D) to successfully achieve outcomes and results. Use company procedures, processes, and consistent styles. Write, issue and update hardware and software documentation; adhere to coding standards when developing software. Maintain traceability, update documentation, use version control for all document changes. Provide expert help for the Support team to help address customer problems with the use of solutions developed by Application Engineering. Capture and communicate ideas and technical information on solutions, their performance and application, verbally and in written technical documentation, and provide internally (Marketing, Sales) and externally to customers and Representatives. Write technical articles and application notes for customers and for publication. Support promotion of company application engineering capability at industry exhibitions. Manage customer relationship for application engineering projects: Build and maintain a strong working relationship with the customer to understand their needs and communicate that within the company. Experience: Embedded Firmware Development : Can develop real-time embedded firmware in C/C++ covering the full design life cycle; Has working experience with firmware release process, version control, and bug management. Hardware Development: Working experience with schematic capture, building and debugging circuits; Can use standard electronics principles to prove robustness of designs. Electronics Knowledge: Good design knowledge of digital and analogue electronics, and software design using C/C++. Project Management: Able to demonstrate successful outcomes on working on a project either autonomously or as part of a larger team; Experience working within an agile, continuous delivery environment. Procedures and Processes : Appreciates the benefits of working to defined processes; Prior contact using systems for software version control, issue tracking, planning would be a benefit, with an emphasis on using these tools to collaborate in a smooth fashion. Tools and Technologies: Able to specify, install, use and maintain tools and technologies (e.g. development environments) needed for software development. Education: Minimum of a 2:1 degree in a relevant field (for example, but not limited to, mechatronics, electronics, AI, robotics). This would ideally suit someone looking to move into their second job, but graduates would be considered. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
04/05/2024
Full time
Overview The role of Application Engineer is to develop engineering solutions using company products or board sets to meet customer needs. The role involves all aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires in-depth understanding of the functionality and use of the company's products and board sets and how to adapt them for new applications. It requires international travel. Duties and responsibilities Investigate requests for the development of solutions to meet customer applications, originating from customers or internally from Product Management. Undertake investigative / feasibility work to develop solutions. Plan and cost projects; provide information to Sales for quotation. Develop application solutions through developing new hardware and software, configuring products, and integrating 3rd party products. Test and maintain hardware and software, including release process, version control, and bug management. Write and maintain documentation for designs to describe functionality, use and reasons for design decisions. Perform acceptance testing of application solutions to verify correct operation, prior to release to the market. Resolve any issues found before providing to customers. Manage projects and work as a team member on projects; plan, track and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with people inside and outside the company, and coordinate other departments involved (such as R&D) to successfully achieve outcomes and results. Use company procedures, processes, and consistent styles. Write, issue and update hardware and software documentation; adhere to coding standards when developing software. Maintain traceability, update documentation, use version control for all document changes. Provide expert help for the Support team to help address customer problems with the use of solutions developed by Application Engineering. Capture and communicate ideas and technical information on solutions, their performance and application, verbally and in written technical documentation, and provide internally (Marketing, Sales) and externally to customers and Representatives. Write technical articles and application notes for customers and for publication. Support promotion of company application engineering capability at industry exhibitions. Manage customer relationship for application engineering projects: Build and maintain a strong working relationship with the customer to understand their needs and communicate that within the company. Experience: Embedded Firmware Development : Can develop real-time embedded firmware in C/C++ covering the full design life cycle; Has working experience with firmware release process, version control, and bug management. Hardware Development: Working experience with schematic capture, building and debugging circuits; Can use standard electronics principles to prove robustness of designs. Electronics Knowledge: Good design knowledge of digital and analogue electronics, and software design using C/C++. Project Management: Able to demonstrate successful outcomes on working on a project either autonomously or as part of a larger team; Experience working within an agile, continuous delivery environment. Procedures and Processes : Appreciates the benefits of working to defined processes; Prior contact using systems for software version control, issue tracking, planning would be a benefit, with an emphasis on using these tools to collaborate in a smooth fashion. Tools and Technologies: Able to specify, install, use and maintain tools and technologies (e.g. development environments) needed for software development. Education: Minimum of a 2:1 degree in a relevant field (for example, but not limited to, mechatronics, electronics, AI, robotics). This would ideally suit someone looking to move into their second job, but graduates would be considered. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.