Introduction: Our client stands as an approved Maintenance Repair Organisation accredited by both EASA and UK CAA, entrusted with delivering Line & Base Maintenance services for a range of aircraft including the B737 NG, B737 Max, B777, and B787. As part of their ongoing growth, we are seeking B1 Licensed Aircraft Engineers to join our esteemed organisation. Candidates should hold a valid UK CAA Category B1 Part-66 Licence, with type ratings on B737 NG, B777, and/or B787 aircraft. Responsibilities: The B1 Licensed Aircraft Engineer will take charge of supervising Mechanics and overseeing inspection and certification of scheduled maintenance tasks, defect rectification, modifications, structural repairs, and functional tests across Airframe, Engine, and Electrical systems. They will collaborate closely with the Aircraft Check Manager to ensure the completion of daily workload tasks and adherence to the production plan. These positions will be under the guidance of the Maintenance Manager - Production and are stationed at our London Gatwick Hangar facility, offering various shift patterns for flexibility. Key Responsibilities: Supervising Mechanics performing Base Maintenance on customer aircraft. Inspecting and certifying scheduled maintenance tasks, defect rectification, modifications, structural repairs, and functional tests on Airframe, Engine, and Electrical systems. Completing all assigned work promptly to minimise aircraft downtime. Ensuring accurate completion of aircraft technical log books, maintenance documentation, job cards, work packages, and zonal handovers within designated timelines. Maintaining high standards of cleanliness and organisation within assigned work areas. Adhering to regulatory requirements, company processes, and procedures. Fostering a culture of safety and reporting all incidents and occurrences in the Boeing Safety Management System. Highlighting technical issues, discrepancies, or other concerns to the Aircraft Check Manager. Actively contributing to continuous improvement initiatives and lean principles. Assisting the management team in the day-to-day operations of the London Gatwick Operation. Undertaking additional duties as required, including potential work away from London Gatwick. Required Qualifications and Experience: Hold a valid UK CAA Category B1 Part-66 Licence. Type rating on one or more of the following aircraft - B737 NG, B777, or B787. Minimum of 1 year exercising certification privileges in a Line or Base Maintenance environment. Demonstrate 6 months recent experience on type and ability to maintain appropriate company authorisations specific to the role. Thorough understanding of Part-145 regulations. Previous experience using AMOS or other Maintenance Management Systems. Strong communication skills and effective problem-solving abilities. Flexibility to adjust working hours to meet operational demands. Team-oriented mindset with a commitment to exceeding internal and external customer expectations. Proficiency in using Microsoft Office applications and willingness to learn in-house systems. Eligibility to hold a London Gatwick Airport airside pass. Candidates must have the right to live and work in the United Kingdom. Work Authorisation: This position is open to locally hired candidates in the United Kingdom who possess current legal authorisation to work in the country. Sadly, our client will not pursue immigration or labour sponsorship for applicants.
26/04/2024
Project-based
Introduction: Our client stands as an approved Maintenance Repair Organisation accredited by both EASA and UK CAA, entrusted with delivering Line & Base Maintenance services for a range of aircraft including the B737 NG, B737 Max, B777, and B787. As part of their ongoing growth, we are seeking B1 Licensed Aircraft Engineers to join our esteemed organisation. Candidates should hold a valid UK CAA Category B1 Part-66 Licence, with type ratings on B737 NG, B777, and/or B787 aircraft. Responsibilities: The B1 Licensed Aircraft Engineer will take charge of supervising Mechanics and overseeing inspection and certification of scheduled maintenance tasks, defect rectification, modifications, structural repairs, and functional tests across Airframe, Engine, and Electrical systems. They will collaborate closely with the Aircraft Check Manager to ensure the completion of daily workload tasks and adherence to the production plan. These positions will be under the guidance of the Maintenance Manager - Production and are stationed at our London Gatwick Hangar facility, offering various shift patterns for flexibility. Key Responsibilities: Supervising Mechanics performing Base Maintenance on customer aircraft. Inspecting and certifying scheduled maintenance tasks, defect rectification, modifications, structural repairs, and functional tests on Airframe, Engine, and Electrical systems. Completing all assigned work promptly to minimise aircraft downtime. Ensuring accurate completion of aircraft technical log books, maintenance documentation, job cards, work packages, and zonal handovers within designated timelines. Maintaining high standards of cleanliness and organisation within assigned work areas. Adhering to regulatory requirements, company processes, and procedures. Fostering a culture of safety and reporting all incidents and occurrences in the Boeing Safety Management System. Highlighting technical issues, discrepancies, or other concerns to the Aircraft Check Manager. Actively contributing to continuous improvement initiatives and lean principles. Assisting the management team in the day-to-day operations of the London Gatwick Operation. Undertaking additional duties as required, including potential work away from London Gatwick. Required Qualifications and Experience: Hold a valid UK CAA Category B1 Part-66 Licence. Type rating on one or more of the following aircraft - B737 NG, B777, or B787. Minimum of 1 year exercising certification privileges in a Line or Base Maintenance environment. Demonstrate 6 months recent experience on type and ability to maintain appropriate company authorisations specific to the role. Thorough understanding of Part-145 regulations. Previous experience using AMOS or other Maintenance Management Systems. Strong communication skills and effective problem-solving abilities. Flexibility to adjust working hours to meet operational demands. Team-oriented mindset with a commitment to exceeding internal and external customer expectations. Proficiency in using Microsoft Office applications and willingness to learn in-house systems. Eligibility to hold a London Gatwick Airport airside pass. Candidates must have the right to live and work in the United Kingdom. Work Authorisation: This position is open to locally hired candidates in the United Kingdom who possess current legal authorisation to work in the country. Sadly, our client will not pursue immigration or labour sponsorship for applicants.
PRINCIPAL EC&I ELECTRICAL ENGINEER Up to £68 per hour. Warrington & Cumbria - Hybrid The company that specializes in providing nuclear engineering and technical services globally is currently looking for PRINCIPAL EC&I ELECTRICAL ENGINEER . With a focus on innovation and safety, it offers a range of solutions for nuclear power plants and facilities. Through collaboration with industry partners, it drives advancements in nuclear technology and safety practices. The engineer will be an expert in diverse engineering drawings, including Block Cable and Single Line Diagrams. You will be involved in Meticulous documentation, creating precise Termination Drawings and detailed instrument datasheets. Holistic capabilities in Electrical Power Distribution, Control Systems, and Instrumentation Design for effective contribution to multidisciplinary projects. Skills Required: EC&I Electrical designing experience. Electrical Power Distribution Design. Knowledge of 61508 (electrical safety mechs). Create control & instrumentation systems. If you are looking to collaborate with industry partners and continue to drive advancements in nuclear technology and safety practices, then this role is for you. * PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role.
26/04/2024
Project-based
PRINCIPAL EC&I ELECTRICAL ENGINEER Up to £68 per hour. Warrington & Cumbria - Hybrid The company that specializes in providing nuclear engineering and technical services globally is currently looking for PRINCIPAL EC&I ELECTRICAL ENGINEER . With a focus on innovation and safety, it offers a range of solutions for nuclear power plants and facilities. Through collaboration with industry partners, it drives advancements in nuclear technology and safety practices. The engineer will be an expert in diverse engineering drawings, including Block Cable and Single Line Diagrams. You will be involved in Meticulous documentation, creating precise Termination Drawings and detailed instrument datasheets. Holistic capabilities in Electrical Power Distribution, Control Systems, and Instrumentation Design for effective contribution to multidisciplinary projects. Skills Required: EC&I Electrical designing experience. Electrical Power Distribution Design. Knowledge of 61508 (electrical safety mechs). Create control & instrumentation systems. If you are looking to collaborate with industry partners and continue to drive advancements in nuclear technology and safety practices, then this role is for you. * PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role.
Job Title: Continuous Improvement Lead Industry: Medical Device Manufacturing Location: Plymouth Position Type: Permanent About The Company Join a pioneering team at a UK-based company specializing in advanced wound care and wound closure products. An organisation dedicated to developing and manufacturing world-leading solutions that enhance patient care. With a wealth of resources and specialized expertise, they offer a unique opportunity to be part of a team involved in every aspect of product design, development, and manufacture. Job Description Overview Responsible for all manufacturing processes, lean improvements, cost reduction, technical capability enhancement, process development, new production introduction delivering outputs in line with the business objectives on safety, quality, delivery, and cost. To execute site support activities and provide maintenance of all relevant operational equipment to ensure longevity and availability. Key Responsibilities Working closely alongside production operations to ensure the startup/shut down and continual running of all manufacturing processes. Establish & maintain standard processes within the validated process window plus optimisation of the technical performance for all manufacturing elements. Investigate and resolve issues related to the technical performance Optimize and deliver continuous improvement on existing manufacturing processes. Assist R&D with the introduction of new products and processes into manufacturing. Development of new standard processes and ensure optimal implementation into manufacturing supported with initial procedures, training and coaching of manufacturing. Collaborate with Group Engineering to execute or support assigned capital expenditure projects. Maintain all production equipment to the defined schedule and provide maintenance of the whole site requirements including, fire system testing/training, legionella checks, calibration, and contractor control. Qualifications Current experience in production environment support role (or 5 years min). Experience of developing and/or testing a process within a clean room manufacturing environment. Good understanding of Lean Principles (5S/VSM/Kaizen). Minimum of HNC level qualification in mechanical, electronic, industrial, or manufacturing engineering, or similar. Experience in process and product validation (sterile packaging according to ISO 11607 would be advantageous). Understanding of a quality management system (ISO13485/FDA) and medical device manufacturing advantageous. Very good MS Office skills, especially Excel. Strong organizational skills with the ability to communicate at all levels of the organization. Effective time management with the ability to set priorities. Good written and spoken English. Salary & Benefits Up to £45,000 per annum (Depending on Experience) Annual incentive bonus Life Cover Penson contribution up to 6% Dental Insurance Employee share scheme Other Information Exciting opportunity to lead a transformative project with significant organizational impact. Competitive salary package commensurate with experience. Opportunity to work with a dynamic and collaborative team focused on driving continuous improvement and excellence. How to Apply Apply now by submitting your CV below, alternatively you can send your CV. Please include "Continuous Improvement Lead" in the subject line
25/04/2024
Full time
Job Title: Continuous Improvement Lead Industry: Medical Device Manufacturing Location: Plymouth Position Type: Permanent About The Company Join a pioneering team at a UK-based company specializing in advanced wound care and wound closure products. An organisation dedicated to developing and manufacturing world-leading solutions that enhance patient care. With a wealth of resources and specialized expertise, they offer a unique opportunity to be part of a team involved in every aspect of product design, development, and manufacture. Job Description Overview Responsible for all manufacturing processes, lean improvements, cost reduction, technical capability enhancement, process development, new production introduction delivering outputs in line with the business objectives on safety, quality, delivery, and cost. To execute site support activities and provide maintenance of all relevant operational equipment to ensure longevity and availability. Key Responsibilities Working closely alongside production operations to ensure the startup/shut down and continual running of all manufacturing processes. Establish & maintain standard processes within the validated process window plus optimisation of the technical performance for all manufacturing elements. Investigate and resolve issues related to the technical performance Optimize and deliver continuous improvement on existing manufacturing processes. Assist R&D with the introduction of new products and processes into manufacturing. Development of new standard processes and ensure optimal implementation into manufacturing supported with initial procedures, training and coaching of manufacturing. Collaborate with Group Engineering to execute or support assigned capital expenditure projects. Maintain all production equipment to the defined schedule and provide maintenance of the whole site requirements including, fire system testing/training, legionella checks, calibration, and contractor control. Qualifications Current experience in production environment support role (or 5 years min). Experience of developing and/or testing a process within a clean room manufacturing environment. Good understanding of Lean Principles (5S/VSM/Kaizen). Minimum of HNC level qualification in mechanical, electronic, industrial, or manufacturing engineering, or similar. Experience in process and product validation (sterile packaging according to ISO 11607 would be advantageous). Understanding of a quality management system (ISO13485/FDA) and medical device manufacturing advantageous. Very good MS Office skills, especially Excel. Strong organizational skills with the ability to communicate at all levels of the organization. Effective time management with the ability to set priorities. Good written and spoken English. Salary & Benefits Up to £45,000 per annum (Depending on Experience) Annual incentive bonus Life Cover Penson contribution up to 6% Dental Insurance Employee share scheme Other Information Exciting opportunity to lead a transformative project with significant organizational impact. Competitive salary package commensurate with experience. Opportunity to work with a dynamic and collaborative team focused on driving continuous improvement and excellence. How to Apply Apply now by submitting your CV below, alternatively you can send your CV. Please include "Continuous Improvement Lead" in the subject line
We are currently looking for a PriceFx Domain Consultant to work in the UK. We are looking for someone with PriceFx functional & technical experience & skills to deliver implementation & integration projects for oil & gas, manufacturing or other industry clients The Domain Consultant will Work closely with Business and IT to discuss business requirements, challenges & expectations, generate innovative approaches to existing Other duties include: problems or new opportunities Responsible for identifying and documenting the business needs of clients Work on assigned projects to bring valuable business domain, technical and application knowledge Set up & Configure PriceFx modules like price setting, quoting, analytics, price optimization, rebates based on business & functional requirements to deliver desired outcome Describe pricing module & technology in terms easily understood by business customers and set realistic customer expectations for the project outcome Capture business problems, value drivers, functional and non-functional requirements, including health, safety, security, usability, data, supportability considerations Assess and model processes, data flows, and technology to understand the current gaps and issues, opportunities for improvement, create clear documentation requirement, design documentations Keep updated to align with the solution over the project life cycle of implementation, integration, enhancement, managed services Ensure traceability of requirements from business needs and requirements, through testing and scope changes, to final solution Configure and document software and processes, using agreed standards and tools Create acceptance criteria and validate that solutions meet business needs through defining and coordinating testing Perform Unit, System Integration and E2E process testing for new enhancements, projects Perform or facilitate change management communication to the user community on future IT solution changes (ie raise change ticket) Guide business stakeholders to gain acceptance/sign-off What we're looking for Engg, Engg+MBA PriceFx Trained or certified Configuration Engineer PriceFx trained business user, data migration and integration engineer 5-10+ years of industry experience in PriceFx implementation, integration with at least 1-2 end to end implementation experience Excellent written and oral communication, stakeholder engagement
24/04/2024
Project-based
We are currently looking for a PriceFx Domain Consultant to work in the UK. We are looking for someone with PriceFx functional & technical experience & skills to deliver implementation & integration projects for oil & gas, manufacturing or other industry clients The Domain Consultant will Work closely with Business and IT to discuss business requirements, challenges & expectations, generate innovative approaches to existing Other duties include: problems or new opportunities Responsible for identifying and documenting the business needs of clients Work on assigned projects to bring valuable business domain, technical and application knowledge Set up & Configure PriceFx modules like price setting, quoting, analytics, price optimization, rebates based on business & functional requirements to deliver desired outcome Describe pricing module & technology in terms easily understood by business customers and set realistic customer expectations for the project outcome Capture business problems, value drivers, functional and non-functional requirements, including health, safety, security, usability, data, supportability considerations Assess and model processes, data flows, and technology to understand the current gaps and issues, opportunities for improvement, create clear documentation requirement, design documentations Keep updated to align with the solution over the project life cycle of implementation, integration, enhancement, managed services Ensure traceability of requirements from business needs and requirements, through testing and scope changes, to final solution Configure and document software and processes, using agreed standards and tools Create acceptance criteria and validate that solutions meet business needs through defining and coordinating testing Perform Unit, System Integration and E2E process testing for new enhancements, projects Perform or facilitate change management communication to the user community on future IT solution changes (ie raise change ticket) Guide business stakeholders to gain acceptance/sign-off What we're looking for Engg, Engg+MBA PriceFx Trained or certified Configuration Engineer PriceFx trained business user, data migration and integration engineer 5-10+ years of industry experience in PriceFx implementation, integration with at least 1-2 end to end implementation experience Excellent written and oral communication, stakeholder engagement
Lead Electrical Engineer - Inside IR35 - €750 per day! We are recruiting an Electrical Engineer for a project in County Clare, Ireland, which is expected to run until the end of February 2026. Our client is in the process of transitioning a power station's primary fuel from coal to heavy fuel oil. The works require the construction of two new heavy fuel oil tanks, new auxiliary boilers, new ash injection system, upgrade of the existing HFO Systems, ancillary systems and modifications to the existing site infrastructure. As an Electrical Engineer you will be tasked to manage the key responsibilities which are listed below: - Perform role of lead electrical engineer and be responsible for the electrical engineering works on site for the successful delivery of the emergency generation projects. Manage Site teams (as required), and liaison with Station Electrical and Instrumentation (E&I) teams. Liaise with Control & Instrumentation, Mechanical and Civil design teams to ensure delivery co-ordination on multi-disciplinary projects. Ensure that electrical systems are installed, tested, and operated safely and efficiently in accordance with regulations, standards, and guidelines. Co-ordinate electrical testing and commissioning activities on Low Voltage (LV), Medium Voltage (MV) and High Voltage (HV) systems and provide advice on testing and commissioning procedures and documentation. Support the management of projects from installation, commissioning, and handover. Support the team of electrical engineers delivering engineering design and support services for generating technologies. Support for the Safety Systems at site and apply a high level of safety standards in every aspect of the work. Skills and Experience Proven track record of significant experience in the power generation industry. A minimum of 7 years' relevant experience is required. Design, and Construction or Commissioning experience, is preferred. Extensive knowledge of electrical equipment utilised in power plant projects, preferably including LV and MV Proven ability to deliver on the key responsibilities outlined above. A proven track record in delivering complex engineering projects and ability to manage multiple projects. Experience of Project Management tools would be an advantage. Working knowledge of Health, Safety and Environment Standards, and Electrical Safety procedures An EU/British passport will be required for this role, as the role requires onsite working Monday to Friday. The daily rate on offer is €750 all-inclusive (no expenses). Further information is available upon request.
23/04/2024
Project-based
Lead Electrical Engineer - Inside IR35 - €750 per day! We are recruiting an Electrical Engineer for a project in County Clare, Ireland, which is expected to run until the end of February 2026. Our client is in the process of transitioning a power station's primary fuel from coal to heavy fuel oil. The works require the construction of two new heavy fuel oil tanks, new auxiliary boilers, new ash injection system, upgrade of the existing HFO Systems, ancillary systems and modifications to the existing site infrastructure. As an Electrical Engineer you will be tasked to manage the key responsibilities which are listed below: - Perform role of lead electrical engineer and be responsible for the electrical engineering works on site for the successful delivery of the emergency generation projects. Manage Site teams (as required), and liaison with Station Electrical and Instrumentation (E&I) teams. Liaise with Control & Instrumentation, Mechanical and Civil design teams to ensure delivery co-ordination on multi-disciplinary projects. Ensure that electrical systems are installed, tested, and operated safely and efficiently in accordance with regulations, standards, and guidelines. Co-ordinate electrical testing and commissioning activities on Low Voltage (LV), Medium Voltage (MV) and High Voltage (HV) systems and provide advice on testing and commissioning procedures and documentation. Support the management of projects from installation, commissioning, and handover. Support the team of electrical engineers delivering engineering design and support services for generating technologies. Support for the Safety Systems at site and apply a high level of safety standards in every aspect of the work. Skills and Experience Proven track record of significant experience in the power generation industry. A minimum of 7 years' relevant experience is required. Design, and Construction or Commissioning experience, is preferred. Extensive knowledge of electrical equipment utilised in power plant projects, preferably including LV and MV Proven ability to deliver on the key responsibilities outlined above. A proven track record in delivering complex engineering projects and ability to manage multiple projects. Experience of Project Management tools would be an advantage. Working knowledge of Health, Safety and Environment Standards, and Electrical Safety procedures An EU/British passport will be required for this role, as the role requires onsite working Monday to Friday. The daily rate on offer is €750 all-inclusive (no expenses). Further information is available upon request.
Position: Mechanical Technician Pay rate: £23.82 p/h inside IR35. location: Stevenage, UK Role Type: 12 Month contract with extension Position: Onsite IO Associates seeks a Panels Surface Treatments Technician for the Stevenage site . Join a global aerospace leader specializing in commercial and military aircraft, helicopters, defense, and space sectors. This role offers a chance to contribute to innovative projects within a dynamic team shaping the future of aviation and space systems. Responsibilities Collaborating within an AIT Operations team to consistently meet quality standards and adhere to production plans. Following LDS guidelines for methods and procedures, while ensuring compliance with standard processes, area requirements, and safety protocols. Upholding Cleanroom Regulations, local safety guidelines, and the 5S policy within the work area. Providing progress updates to Lead Technicians or Team Leads as needed, participating in shop floor meetings, supporting trainees, and contributing to continuous improvement efforts. Skills required Proficient in interpreting detailed drawings and electronic work instructions within prescribed procedures. Skilled in following procedures with defined checkpoints and quality gates. Experienced in various industries such as Space, Aerospace, Automotive, Motorsport, etc. Capable of working at elevated heights. Competent in preparing paint compounds according to manufacturer specifications. This is an excellent opportunity to work for an international company that encourages and facilitates personal growth. Please apply or get in touch with Munish or Email
22/04/2024
Project-based
Position: Mechanical Technician Pay rate: £23.82 p/h inside IR35. location: Stevenage, UK Role Type: 12 Month contract with extension Position: Onsite IO Associates seeks a Panels Surface Treatments Technician for the Stevenage site . Join a global aerospace leader specializing in commercial and military aircraft, helicopters, defense, and space sectors. This role offers a chance to contribute to innovative projects within a dynamic team shaping the future of aviation and space systems. Responsibilities Collaborating within an AIT Operations team to consistently meet quality standards and adhere to production plans. Following LDS guidelines for methods and procedures, while ensuring compliance with standard processes, area requirements, and safety protocols. Upholding Cleanroom Regulations, local safety guidelines, and the 5S policy within the work area. Providing progress updates to Lead Technicians or Team Leads as needed, participating in shop floor meetings, supporting trainees, and contributing to continuous improvement efforts. Skills required Proficient in interpreting detailed drawings and electronic work instructions within prescribed procedures. Skilled in following procedures with defined checkpoints and quality gates. Experienced in various industries such as Space, Aerospace, Automotive, Motorsport, etc. Capable of working at elevated heights. Competent in preparing paint compounds according to manufacturer specifications. This is an excellent opportunity to work for an international company that encourages and facilitates personal growth. Please apply or get in touch with Munish or Email
Global Technology Solutions Ltd
Antrim, County Antrim
Ideal location - Belfast Salary - £27000 - 29000 Hours: Monday to Friday, pick up kit by 08:30 as local PUDO working on client site up till 17:30, overtime available Benefits: Car + Parking cards and Fuel cards + Pension + on call payment Start date - ASAP We have an exciting opportunity for a senior field service engineer to join a blue chip organisation on a permanent basis in Belfast . Senior Field Service Engineer will be required to fault find and repair a variety of IT equipment including Servers, PCs, Laptop, printer and point of sales systems (EPOS) at various Customer locations across the UK. Ensuring company processes, procedures and contractual requirements are followed whilst maintaining high levels of customer service. You must be an experienced time served "Field Service Engineer", a confident communicator at all levels and work well as part of a team. The position will report into Team Leader/Resource Managers (Field) but will also have critical relationships with Call Control and Technical vetting teams with Field Services. The role will involve: * Capable of working independently and remotely, required to perform on site troubleshooting on a wide range of products in a software or hardware environment. * Proficient in the installation, configuration and support of Server/Desktop/EPOS environment and in addition, be able to connect and install client software for various networking platforms at various customer locations in the UK. * Ability to follow documented procedures and adhere to safety and ESD precautions at all times. * Be able to demonstrate strong problem solving techniques with the ability to adapt and learn on the job. * Develop, grow and maintain professional working relationships with all internal stakeholders Call Control, Tech Vetting teams. * Ensure process, procedural and contractual agreements are being followed correctly. * Endeavour to provide all customers with the best level of customer service and support. * Complete documentation including Field Service Call reports and Customer Checksheets and ensure these are returned within SLA timescales. * Work proactively with call allocators to ensure SLA's are met in the most economic way. * Have a solid understanding of customers SLA requirement and use initiative to ensure the expectation is met and exceeded * Any additional activity as directed by Senior Management Key Experience * Have an excellent working knowledge of Server/PC architecture, knowledge of Windows Operating systems, break fix and troubleshooting of Servers, Desktops, EPOS, Laptops, and Printers. * Manufacturer recognised accreditations, ie HP/IBM/Dell. Both Server and Desktop. * At least 6 years customer facing IT industry experience. * Capable of working independently on a wide range of products. * Excellent communication skills. * Excellent proven organisational and customer service skills. * Able to work under pressure. * Able to maintain a consistent high standard of quality and professionalism. * Excellent Time management skills. * Team Player - ability to work as part of the team to deliver operational excellence. * Awareness of ITIL methodologies and best practice. * Previous employment in a similar role. * Ability to show flexibility to help the changing needs of the team. * Adhere to company standards and procedures at all times unless otherwise directed. * Maintain excellent customer relationships. * Maintain high levels of Punctuality, Communication, Attitude, Competence and Quality of Service * Maintain all appropriate Manufacturer Server Accreditations where app Senior Engineer main skills * MUST be able to obtain security clearances, BPSS & SC, (NPPV3 great to have but not essential) * X86 Server Hardware break fix Skills (can replace all components, upgrade Bios/firmware) * Laptop Hardware break fix skills (replace all components) * Must be able to hold Main vendor certifications on Servers & Laptops (Dell, HP, Lenovo) * Will form part of an on call rota covering 24*7*365 call outs Senior Engineer good to have experience/skills * Netapp - major advantage to hold this * Retail/Point of Sale (POS) Personal Attribute * Highly enthusiastic, approachable and self motivated to achieve targets. * Ability to prioritise workload effectively. * A Methodical and accurate approach to the job is critical. * Team focused - a genuine passion to deliver excellence through continuous development and improvement. * Be able to remain positive at all times and influence those around you. * Excellent communicator who can remain objective and focussed with Customers and Internal Agencies alike. * Good relationship management skills. * Previous Senior Field Engineer experience desirable. * Analytical, with exceptional attention to detail. * Innovative thinking, in terms of service quality and improvements * Full UK Driving Licence. In applying for this position, you consent to your personal data being shared with the specified employer and for your details to remain with GTS for as long as is necessary to process your application. See our Privacy Notice for full information Global Technology Solutions is acting as an Employment Agency in relation to this vacancy.
22/04/2024
Full time
Ideal location - Belfast Salary - £27000 - 29000 Hours: Monday to Friday, pick up kit by 08:30 as local PUDO working on client site up till 17:30, overtime available Benefits: Car + Parking cards and Fuel cards + Pension + on call payment Start date - ASAP We have an exciting opportunity for a senior field service engineer to join a blue chip organisation on a permanent basis in Belfast . Senior Field Service Engineer will be required to fault find and repair a variety of IT equipment including Servers, PCs, Laptop, printer and point of sales systems (EPOS) at various Customer locations across the UK. Ensuring company processes, procedures and contractual requirements are followed whilst maintaining high levels of customer service. You must be an experienced time served "Field Service Engineer", a confident communicator at all levels and work well as part of a team. The position will report into Team Leader/Resource Managers (Field) but will also have critical relationships with Call Control and Technical vetting teams with Field Services. The role will involve: * Capable of working independently and remotely, required to perform on site troubleshooting on a wide range of products in a software or hardware environment. * Proficient in the installation, configuration and support of Server/Desktop/EPOS environment and in addition, be able to connect and install client software for various networking platforms at various customer locations in the UK. * Ability to follow documented procedures and adhere to safety and ESD precautions at all times. * Be able to demonstrate strong problem solving techniques with the ability to adapt and learn on the job. * Develop, grow and maintain professional working relationships with all internal stakeholders Call Control, Tech Vetting teams. * Ensure process, procedural and contractual agreements are being followed correctly. * Endeavour to provide all customers with the best level of customer service and support. * Complete documentation including Field Service Call reports and Customer Checksheets and ensure these are returned within SLA timescales. * Work proactively with call allocators to ensure SLA's are met in the most economic way. * Have a solid understanding of customers SLA requirement and use initiative to ensure the expectation is met and exceeded * Any additional activity as directed by Senior Management Key Experience * Have an excellent working knowledge of Server/PC architecture, knowledge of Windows Operating systems, break fix and troubleshooting of Servers, Desktops, EPOS, Laptops, and Printers. * Manufacturer recognised accreditations, ie HP/IBM/Dell. Both Server and Desktop. * At least 6 years customer facing IT industry experience. * Capable of working independently on a wide range of products. * Excellent communication skills. * Excellent proven organisational and customer service skills. * Able to work under pressure. * Able to maintain a consistent high standard of quality and professionalism. * Excellent Time management skills. * Team Player - ability to work as part of the team to deliver operational excellence. * Awareness of ITIL methodologies and best practice. * Previous employment in a similar role. * Ability to show flexibility to help the changing needs of the team. * Adhere to company standards and procedures at all times unless otherwise directed. * Maintain excellent customer relationships. * Maintain high levels of Punctuality, Communication, Attitude, Competence and Quality of Service * Maintain all appropriate Manufacturer Server Accreditations where app Senior Engineer main skills * MUST be able to obtain security clearances, BPSS & SC, (NPPV3 great to have but not essential) * X86 Server Hardware break fix Skills (can replace all components, upgrade Bios/firmware) * Laptop Hardware break fix skills (replace all components) * Must be able to hold Main vendor certifications on Servers & Laptops (Dell, HP, Lenovo) * Will form part of an on call rota covering 24*7*365 call outs Senior Engineer good to have experience/skills * Netapp - major advantage to hold this * Retail/Point of Sale (POS) Personal Attribute * Highly enthusiastic, approachable and self motivated to achieve targets. * Ability to prioritise workload effectively. * A Methodical and accurate approach to the job is critical. * Team focused - a genuine passion to deliver excellence through continuous development and improvement. * Be able to remain positive at all times and influence those around you. * Excellent communicator who can remain objective and focussed with Customers and Internal Agencies alike. * Good relationship management skills. * Previous Senior Field Engineer experience desirable. * Analytical, with exceptional attention to detail. * Innovative thinking, in terms of service quality and improvements * Full UK Driving Licence. In applying for this position, you consent to your personal data being shared with the specified employer and for your details to remain with GTS for as long as is necessary to process your application. See our Privacy Notice for full information Global Technology Solutions is acting as an Employment Agency in relation to this vacancy.
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
22/04/2024
Project-based
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.