ARM (Advanced Resource Managers)
Corsham, Wiltshire
Lead Mechanical Engineer (Assembly, Integration & Testing) Corsham 12-month contract Paying up to £45p/h (Umbrella) ARM have partnered with an Aerospace client who are looking for an experienced AIT engineer to work out of their manufacturing site based in Corsham. As the AIT Lead Engineer, you'll be responsible for leading the Mechanical team and ensuring all engineering concepts are delivered to the shop floor. Responsibilities: * Leading a team of AIT engineers on specific projects as well as planning the mechanical team's activities on a weekly basis. * Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A - E' * Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures, and test reports. * Control of all project MGSE, flight & support equipment * Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. * Alignment - producing test procedures and operating and maintaining optical alignment equipment. * Designing test equipment, overseeing its manufacture, and commissioning * Mechanical handling of spacecraft, instruments, payloads, solar arrays, antennas etc * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Install and validate test instrumentation. * Support propulsion testing * Handling and installation of thermal hardware * Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation associated with performing these tasks. * Pyrotechnic handling, installation, and safety * Plan and control the workload of the AIT team consisting of engineers and technicians. * Be able to travel overseas to work for short periods (typically 2-3 months, could be 6-7 months on occasions) * Be able to integrate quickly and easily into an AIT team. Experience required: * Appreciation of satellite integration processes and project phases * Use of SAP or other ERP System * Understanding of build documentation and the need for it * Driving build quality through review of processes and implementation of improvements * Managing a team during day-to-day activities ensuring work is completed on time and the correct standard. * Controlling and delivery of projects to budget and schedule * Face-to-face dealings with customers and suppliers * Worked in volatile, high-pressure environments to resolve technical and personnel conflicts. * Spacecraft Mechanical testing on prime projects is essential. * Leading other team members * Production of MGSE specs and operation of MGSE and flight HW * Production of high-quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
03/05/2024
Project-based
Lead Mechanical Engineer (Assembly, Integration & Testing) Corsham 12-month contract Paying up to £45p/h (Umbrella) ARM have partnered with an Aerospace client who are looking for an experienced AIT engineer to work out of their manufacturing site based in Corsham. As the AIT Lead Engineer, you'll be responsible for leading the Mechanical team and ensuring all engineering concepts are delivered to the shop floor. Responsibilities: * Leading a team of AIT engineers on specific projects as well as planning the mechanical team's activities on a weekly basis. * Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A - E' * Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures, and test reports. * Control of all project MGSE, flight & support equipment * Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. * Alignment - producing test procedures and operating and maintaining optical alignment equipment. * Designing test equipment, overseeing its manufacture, and commissioning * Mechanical handling of spacecraft, instruments, payloads, solar arrays, antennas etc * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Install and validate test instrumentation. * Support propulsion testing * Handling and installation of thermal hardware * Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation associated with performing these tasks. * Pyrotechnic handling, installation, and safety * Plan and control the workload of the AIT team consisting of engineers and technicians. * Be able to travel overseas to work for short periods (typically 2-3 months, could be 6-7 months on occasions) * Be able to integrate quickly and easily into an AIT team. Experience required: * Appreciation of satellite integration processes and project phases * Use of SAP or other ERP System * Understanding of build documentation and the need for it * Driving build quality through review of processes and implementation of improvements * Managing a team during day-to-day activities ensuring work is completed on time and the correct standard. * Controlling and delivery of projects to budget and schedule * Face-to-face dealings with customers and suppliers * Worked in volatile, high-pressure environments to resolve technical and personnel conflicts. * Spacecraft Mechanical testing on prime projects is essential. * Leading other team members * Production of MGSE specs and operation of MGSE and flight HW * Production of high-quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
ARM (Advanced Resource Managers)
Stevenage, Hertfordshire
Mechanical Engineer (Assembly, Integration & Testing) Stevenage 12-month contract Paying up to £35p/h (Umbrella) ARM has partnered with an Aerospace client who is looking for an experienced Mechanical Engineer (AIT) to work out of their manufacturing site based in Stevenage. As the AIT Mechanical Engineer, you'll be responsible for providing support on writing processes, plans, and procedures in 3D Experience for the production of Satellites and payloads. This includes supporting hardware assembly on the Satellites such as black boxes, Solar Array, and structure panels. Supporting Satellite environmental testing at the test facility. Responsibilities: * Support to the customization phase starting at the project kick-off. * Support project DMU (Digital mock-up/design for manufacture) sessions to ensure design for manufacture. * Lead the installation of Satellite appendages and applicable integration flows and preparation. * Oversee unit installation activities on the Satellite. * Support quality reviews, conduct PFMEA and Root Cause Analysis * Support in the creation of re-work instructions based on project requirements and identify parts and tooling required to carry them out. * Design of tooling/build aids for assembly execution * Support to R&D * Training module creation and maintenance. Experience required: * Minimum of HNC level in a Mechanical engineering discipline * Good planning skills and process competence, (MRP system experience an advantage) * Satellite Appendage installation process (Solar Array, reflectors, antennas, deployable systems). * Good understanding and detailed experience of complex mechanical systems. * Lean manufacturing techniques including 5S, root cause analysis, and continuous improvement. * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Handling and installation of thermal hardware (heaters, thermistors) * Mechanical integration of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation/process associated with performing these * Previous experience with payload builds is a distinct advantage. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
03/05/2024
Project-based
Mechanical Engineer (Assembly, Integration & Testing) Stevenage 12-month contract Paying up to £35p/h (Umbrella) ARM has partnered with an Aerospace client who is looking for an experienced Mechanical Engineer (AIT) to work out of their manufacturing site based in Stevenage. As the AIT Mechanical Engineer, you'll be responsible for providing support on writing processes, plans, and procedures in 3D Experience for the production of Satellites and payloads. This includes supporting hardware assembly on the Satellites such as black boxes, Solar Array, and structure panels. Supporting Satellite environmental testing at the test facility. Responsibilities: * Support to the customization phase starting at the project kick-off. * Support project DMU (Digital mock-up/design for manufacture) sessions to ensure design for manufacture. * Lead the installation of Satellite appendages and applicable integration flows and preparation. * Oversee unit installation activities on the Satellite. * Support quality reviews, conduct PFMEA and Root Cause Analysis * Support in the creation of re-work instructions based on project requirements and identify parts and tooling required to carry them out. * Design of tooling/build aids for assembly execution * Support to R&D * Training module creation and maintenance. Experience required: * Minimum of HNC level in a Mechanical engineering discipline * Good planning skills and process competence, (MRP system experience an advantage) * Satellite Appendage installation process (Solar Array, reflectors, antennas, deployable systems). * Good understanding and detailed experience of complex mechanical systems. * Lean manufacturing techniques including 5S, root cause analysis, and continuous improvement. * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Handling and installation of thermal hardware (heaters, thermistors) * Mechanical integration of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation/process associated with performing these * Previous experience with payload builds is a distinct advantage. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
ARM (Advanced Resource Managers)
Gloucester, Gloucestershire
A market-leading Aerospace client of ours is currently in the market for a Maintenance Fitter to join their team based in Gloucester. You will be part of a diverse multi skilled process and assemble maintenance team, working on equipment used in surface finish, heat treatment, Non-Destructive Testing (NDT), paint & OE Assembly. This role involves being responsible for the safe upkeep and reliability of production assets used in the manufacturing of aircraft parts. Your responsibilities will include: * Carrying out reactive and preventative maintenance. * Interoperation of engineering drawings to fault find & identify spare parts required. * Documenting & Prioritising work through a CMMS. * Operate within all HS&E standards and Policies. What they are looking for. Mandatory: * Time served engineering maintenance apprenticeship (NVQ Level 3) * Must be able to read mechanical drawings including assembly and schematics. * Ability to work as part of a team and work independently. * Ability to demonstrate fault-finding skills/abilities. * Fabrication and fitting skills (Core bench-fitting skills necessary). * Experience using a CMMS (Computerised Maintenance Management System). * Be able to work safely and adhere to HS&E standards and policies. Preferred: * Suitable experience working with furnaces, NDT equipment or surface finish equipment * Electrical experience/qualification. * HNC in mechanical engineering. * Knowledge of lean, 5s & 6 sigma methodologies. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
03/05/2024
Full time
A market-leading Aerospace client of ours is currently in the market for a Maintenance Fitter to join their team based in Gloucester. You will be part of a diverse multi skilled process and assemble maintenance team, working on equipment used in surface finish, heat treatment, Non-Destructive Testing (NDT), paint & OE Assembly. This role involves being responsible for the safe upkeep and reliability of production assets used in the manufacturing of aircraft parts. Your responsibilities will include: * Carrying out reactive and preventative maintenance. * Interoperation of engineering drawings to fault find & identify spare parts required. * Documenting & Prioritising work through a CMMS. * Operate within all HS&E standards and Policies. What they are looking for. Mandatory: * Time served engineering maintenance apprenticeship (NVQ Level 3) * Must be able to read mechanical drawings including assembly and schematics. * Ability to work as part of a team and work independently. * Ability to demonstrate fault-finding skills/abilities. * Fabrication and fitting skills (Core bench-fitting skills necessary). * Experience using a CMMS (Computerised Maintenance Management System). * Be able to work safely and adhere to HS&E standards and policies. Preferred: * Suitable experience working with furnaces, NDT equipment or surface finish equipment * Electrical experience/qualification. * HNC in mechanical engineering. * Knowledge of lean, 5s & 6 sigma methodologies. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
People Source Consulting Ltd
Warwick, Warwickshire
Role: Mechanical Engineer Location: Warwick + Hybrid working Salary: £40,000 - £60,000 (depending on experience and ability) The Role Power electronics requires collaborative working between electronics engineering and mechanical engineering to ensure thermal management, production feasibility, durability, and service life. As a Mechanical Engineer, reporting to the Mechanical Engineering Team Leader, you will take responsibility for the technical delivery of one or more projects and ensure that the tasks assigned to you are completed in a timely and conscientious fashion. Continued close communication with the relevant project leads is required. You will produce SolidWorks CAD models and associated drawings of complex cooling structures with an eye to manufacturability and cost effectiveness at all times. To assess the effectiveness of these designs you will be required to conduct mechanical and thermal analysis. You will have the opportunity to integrate your own methods and ideas in order to deliver the company's technical innovations. Responsibilities Simulate, Model, and Validate Cooling Structures: Conduct detailed simulations and modelling to design cooling structures that efficiently extract heat from power electronics devices. Validate these designs through rigorous testing, considering both liquid and air cooling methods SolidWorks CAD Design and Prototyping: Utilize SolidWorks to create innovative and efficient CAD designs. Develop associated drawings and guide designs from prototype build to volume manufacturing Sealing System Design and Testing: Design and rigorously test sealing systems for optimal environmental performance on housing component Advanced Manufacturing Processes: Spearhead the development of industry-leading manufacturing processes for machined, sheet metal, and polymer parts Mechanical-Electronics Integration: Specify mechanical connections and interfaces for seamless integration with electronic components. Collaborate with electronics engineers to optimize package size and functionality PCB Component Layout and Durability: Support PCB component layout design, ensuring durability under static, dynamic, and thermal loading conditions Comprehensive Documentation: Produce thorough product documentation, including design notes, bills of materials, and user manuals Quality and Safety Adherence: Apply rigorous quality and safety standards throughout project execution. In house prototyping we build and test our products in house. Mechanical dexterity and ability is required. Customer-Centric Approach: Interpret product requirements from customer specifications and ensure strict adherence. Effectively communicate design concepts to multiple stakeholders, including direct interaction with customers Company Values and Self-Driven Problem Solving: Adhere to company policies and procedures related to testing, quality, and documentation release. Demonstrate a proactive and self-motivated approach to solving engineering challenges. Benefits: You will enjoy working as part of a close-knit team where every individual's contribution matters and where you will have the freedom to interact directly with every member of the business. Hybrid Working Unlimited Leave 5% towards each staff members pension scheme contribution Group Life Insurance (4 times basic annual salary) Employee Assistance Programme Minimum educational qualifications: Degree level education in Mechanical Engineering or related subject. Applicants with equivalent alternative qualifications or experience will be considered. Previous Experience: You will have a minimum of 2 years working within a field of mechanical design or simulation. Other advantageous skills: Knowledge of the use of simulation software - both CFD and FEA. Interest in 3D printing technologies. Good mechanical ability, eg experience of machine shops, product assembly Experience of SolidWorks CAD software Working understanding of electronics Familiarity with high voltage (eg electric vehicle) working Design for manufacture and assembly How to apply? Please send a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
02/05/2024
Full time
Role: Mechanical Engineer Location: Warwick + Hybrid working Salary: £40,000 - £60,000 (depending on experience and ability) The Role Power electronics requires collaborative working between electronics engineering and mechanical engineering to ensure thermal management, production feasibility, durability, and service life. As a Mechanical Engineer, reporting to the Mechanical Engineering Team Leader, you will take responsibility for the technical delivery of one or more projects and ensure that the tasks assigned to you are completed in a timely and conscientious fashion. Continued close communication with the relevant project leads is required. You will produce SolidWorks CAD models and associated drawings of complex cooling structures with an eye to manufacturability and cost effectiveness at all times. To assess the effectiveness of these designs you will be required to conduct mechanical and thermal analysis. You will have the opportunity to integrate your own methods and ideas in order to deliver the company's technical innovations. Responsibilities Simulate, Model, and Validate Cooling Structures: Conduct detailed simulations and modelling to design cooling structures that efficiently extract heat from power electronics devices. Validate these designs through rigorous testing, considering both liquid and air cooling methods SolidWorks CAD Design and Prototyping: Utilize SolidWorks to create innovative and efficient CAD designs. Develop associated drawings and guide designs from prototype build to volume manufacturing Sealing System Design and Testing: Design and rigorously test sealing systems for optimal environmental performance on housing component Advanced Manufacturing Processes: Spearhead the development of industry-leading manufacturing processes for machined, sheet metal, and polymer parts Mechanical-Electronics Integration: Specify mechanical connections and interfaces for seamless integration with electronic components. Collaborate with electronics engineers to optimize package size and functionality PCB Component Layout and Durability: Support PCB component layout design, ensuring durability under static, dynamic, and thermal loading conditions Comprehensive Documentation: Produce thorough product documentation, including design notes, bills of materials, and user manuals Quality and Safety Adherence: Apply rigorous quality and safety standards throughout project execution. In house prototyping we build and test our products in house. Mechanical dexterity and ability is required. Customer-Centric Approach: Interpret product requirements from customer specifications and ensure strict adherence. Effectively communicate design concepts to multiple stakeholders, including direct interaction with customers Company Values and Self-Driven Problem Solving: Adhere to company policies and procedures related to testing, quality, and documentation release. Demonstrate a proactive and self-motivated approach to solving engineering challenges. Benefits: You will enjoy working as part of a close-knit team where every individual's contribution matters and where you will have the freedom to interact directly with every member of the business. Hybrid Working Unlimited Leave 5% towards each staff members pension scheme contribution Group Life Insurance (4 times basic annual salary) Employee Assistance Programme Minimum educational qualifications: Degree level education in Mechanical Engineering or related subject. Applicants with equivalent alternative qualifications or experience will be considered. Previous Experience: You will have a minimum of 2 years working within a field of mechanical design or simulation. Other advantageous skills: Knowledge of the use of simulation software - both CFD and FEA. Interest in 3D printing technologies. Good mechanical ability, eg experience of machine shops, product assembly Experience of SolidWorks CAD software Working understanding of electronics Familiarity with high voltage (eg electric vehicle) working Design for manufacture and assembly How to apply? Please send a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
People Source Consulting Ltd
Gloucester, Gloucestershire
Role: Product Support Engineer - industrial automation - PLC - SERVO DRIVES - MOTION CONTROL Location: Gloucester + some remote work Salary: £competitive - we just want the right people ! Occasional international travel to support distributors (2 to 4 weeks per year). *This Client are exclusive to People Source so you MUST apply via this advert.* My client based in Gloucester are looking at hiring Product Support Engineers, this is a hands on role! You will be front line with the clients and customers and running projects from concept to delivery. You must have a technical understanding and a engineering background industrial automation - PLC - SERVO DRIVES - MOTION CONTROL. The Role: You will be working as part of a team alongside our development engineers and customers. Products are centred around programmable motion controllers with PLC functionality used in a broad range of industrial machines ranging from 3D printing to assembly line systems and industrial robots. You will be working with our product hardware and software engineers based in the UK, Italy and Bulgaria to bring the latest automation technology to the market. Alongside this, the role includes active dialogue with our customers and branch offices abroad and will require some limited travel both within and outside the UK. The ability to think logically about problem solving and experience writing software in a high level structured language will be needed and some experience with electrical wiring is desirable. Some prior mechanical knowledge will be helpful but training will be given where appropriate. Specific Job Responsibilities: Work with customers to support their ability to create world-class technical solutions using products, software and programming tools. Assist the development department with testing and evaluating new software and hardware, giving clear feedback to development engineers. Advise customers on the integration and commissioning of automation products including motion co-ordinators, high performance servo drives/motors and industrial robots. Work with branch offices in USA, India and China and with ESTUN Automation in China to provide industry leading products and a world-class customer experience Required Qualifications & Experience Training will be given in areas which are new to the applicant. Degree or similar higher qualification in Software/Mechatronics/Electronics or related discipline. Worked on interfacing automation hardware; eg sensors, actuators, drives and motors. A background in communications using serial, Ethernet and similar media. Experienced in programming industrial automation/manufacturing machines Having a thorough working knowledge and experience of 3 or more of the following will be beneficial: Implementing and commissioning stand-alone automation computers; eg PLC or Motion Controller. Good knowledge of a high level programming language; for example C, BASIC, Python. PLC programming, preferably using the standard IEC61131-3 environment. Electrical interfacing between a controller and sensors/actuators in an automation system. Servo drives and brushless servo motors. Stepper motors and drives. Ethernet networks, protocols and topology. A working knowledge of PCs running Windows. Basic level of Windows/Linux application programming. Real Time deterministic networks, eg EtherCAT, Sercos, CanOpen, Profinet RT. Application and configuration of Industrial Robots. Programming and configuration of touch-screen HMIs Applicants should be a team player and be able to communicate effectively in English. They must be legally entitled to live and work in the UK. A full driving licence is required and applicants must be eligible to obtain business visas for USA/Canada, China and India as some foreign travel may be necessary. Benefits: Attractive salary, profit related pay and pension contribution 5% Some remote/hybrid working up to 25% of working time Group Life and Health Cashplan Insurance How to apply? Send a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
02/05/2024
Full time
Role: Product Support Engineer - industrial automation - PLC - SERVO DRIVES - MOTION CONTROL Location: Gloucester + some remote work Salary: £competitive - we just want the right people ! Occasional international travel to support distributors (2 to 4 weeks per year). *This Client are exclusive to People Source so you MUST apply via this advert.* My client based in Gloucester are looking at hiring Product Support Engineers, this is a hands on role! You will be front line with the clients and customers and running projects from concept to delivery. You must have a technical understanding and a engineering background industrial automation - PLC - SERVO DRIVES - MOTION CONTROL. The Role: You will be working as part of a team alongside our development engineers and customers. Products are centred around programmable motion controllers with PLC functionality used in a broad range of industrial machines ranging from 3D printing to assembly line systems and industrial robots. You will be working with our product hardware and software engineers based in the UK, Italy and Bulgaria to bring the latest automation technology to the market. Alongside this, the role includes active dialogue with our customers and branch offices abroad and will require some limited travel both within and outside the UK. The ability to think logically about problem solving and experience writing software in a high level structured language will be needed and some experience with electrical wiring is desirable. Some prior mechanical knowledge will be helpful but training will be given where appropriate. Specific Job Responsibilities: Work with customers to support their ability to create world-class technical solutions using products, software and programming tools. Assist the development department with testing and evaluating new software and hardware, giving clear feedback to development engineers. Advise customers on the integration and commissioning of automation products including motion co-ordinators, high performance servo drives/motors and industrial robots. Work with branch offices in USA, India and China and with ESTUN Automation in China to provide industry leading products and a world-class customer experience Required Qualifications & Experience Training will be given in areas which are new to the applicant. Degree or similar higher qualification in Software/Mechatronics/Electronics or related discipline. Worked on interfacing automation hardware; eg sensors, actuators, drives and motors. A background in communications using serial, Ethernet and similar media. Experienced in programming industrial automation/manufacturing machines Having a thorough working knowledge and experience of 3 or more of the following will be beneficial: Implementing and commissioning stand-alone automation computers; eg PLC or Motion Controller. Good knowledge of a high level programming language; for example C, BASIC, Python. PLC programming, preferably using the standard IEC61131-3 environment. Electrical interfacing between a controller and sensors/actuators in an automation system. Servo drives and brushless servo motors. Stepper motors and drives. Ethernet networks, protocols and topology. A working knowledge of PCs running Windows. Basic level of Windows/Linux application programming. Real Time deterministic networks, eg EtherCAT, Sercos, CanOpen, Profinet RT. Application and configuration of Industrial Robots. Programming and configuration of touch-screen HMIs Applicants should be a team player and be able to communicate effectively in English. They must be legally entitled to live and work in the UK. A full driving licence is required and applicants must be eligible to obtain business visas for USA/Canada, China and India as some foreign travel may be necessary. Benefits: Attractive salary, profit related pay and pension contribution 5% Some remote/hybrid working up to 25% of working time Group Life and Health Cashplan Insurance How to apply? Send a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
FIELD SERVICE ENGINEER MEDICAL IMAGING EQUIPMENT The Company An exciting new Service Engineering opportunity is now available within an industry leading provider of medical imaging systems. Training is provided and so this employer offers a rare opportunity for engineers with no medical experience to break into the much sought after medical field. Through organic growth along with the acquisition of other companies, you would be joining this organisation during an exciting period of expansion. The Role As a Field Service Engineer you would be part of the Service Engineering team carrying out installations, planned and reactive maintenance as well as break down repair work on a range of medical imaging systems such as MRIs, CTs, X-Rays and Ultrasounds. You would be responsible for managing customers assigned to you, hospitals, predominantly in the Southern part of Ireland, in and around the Cork area. However, as with any field based role, flexibility to travel further afield will be required on occasions should this be required by the wider team and business. You will be required to take part in an out of hours on call rota 1 in every 6 weeks, paid at 200EUR per week. The Location This role will predominantly involve travel in and around the Cork and so ideally applicants will live within 45mins of Cork. However, flexibility to travel is essential. Training Training is provided. This employer regularly hires engineers from non-medical industries who have transferable electro-mechanical repair and software installation/upgrade skills. Therefore, a comprehensive, "tried and tested" training plan is in place to ensure you are well supported and appropriately upskilled. The Package 40-55,000EUR per year basic salary 11EUR per day lunch allowance A choice of a company car or car allowance paid at 8,000EUR per year Minimum on call payment of 200EUR per week (1 in 6 weeks) Private pension Life assurance 33 days annual leave (including bank holidays) What experience is required to apply? Strong electro-mechanical service, fault finding and repair skills Experience with software installations or upgrades Excellent customer service and team work skills Positive attitude and willingness to learn An enjoyment of driving and flexibility to travel as part of a field based role Living within 34mins of Cork Next steps? Click APPLY NOW for a copy of your CV to be sent to CBSbutler. CVs will be reviewed from 2nd Jan and should you be suitable a CBSbutler representative will be in touch within 3 working days.
02/05/2024
Full time
FIELD SERVICE ENGINEER MEDICAL IMAGING EQUIPMENT The Company An exciting new Service Engineering opportunity is now available within an industry leading provider of medical imaging systems. Training is provided and so this employer offers a rare opportunity for engineers with no medical experience to break into the much sought after medical field. Through organic growth along with the acquisition of other companies, you would be joining this organisation during an exciting period of expansion. The Role As a Field Service Engineer you would be part of the Service Engineering team carrying out installations, planned and reactive maintenance as well as break down repair work on a range of medical imaging systems such as MRIs, CTs, X-Rays and Ultrasounds. You would be responsible for managing customers assigned to you, hospitals, predominantly in the Southern part of Ireland, in and around the Cork area. However, as with any field based role, flexibility to travel further afield will be required on occasions should this be required by the wider team and business. You will be required to take part in an out of hours on call rota 1 in every 6 weeks, paid at 200EUR per week. The Location This role will predominantly involve travel in and around the Cork and so ideally applicants will live within 45mins of Cork. However, flexibility to travel is essential. Training Training is provided. This employer regularly hires engineers from non-medical industries who have transferable electro-mechanical repair and software installation/upgrade skills. Therefore, a comprehensive, "tried and tested" training plan is in place to ensure you are well supported and appropriately upskilled. The Package 40-55,000EUR per year basic salary 11EUR per day lunch allowance A choice of a company car or car allowance paid at 8,000EUR per year Minimum on call payment of 200EUR per week (1 in 6 weeks) Private pension Life assurance 33 days annual leave (including bank holidays) What experience is required to apply? Strong electro-mechanical service, fault finding and repair skills Experience with software installations or upgrades Excellent customer service and team work skills Positive attitude and willingness to learn An enjoyment of driving and flexibility to travel as part of a field based role Living within 34mins of Cork Next steps? Click APPLY NOW for a copy of your CV to be sent to CBSbutler. CVs will be reviewed from 2nd Jan and should you be suitable a CBSbutler representative will be in touch within 3 working days.
I am now working closely with an organisation who supplies packaging machinery to the corrugated industry. Role involves installing, commissioning and removing machinery at customer sites across the country and internationally. Requires frequent travel and staying away from home, occasionally including weekends. Preferred skills: Experience in the corrugated industry Control panel building, wiring & testing HMI and PLC programming Job benefits include: Competitive pay with overtime rates PPE and workwear provided Allowances for food and accommodation while travelling Company vehicle and credits cards Health insurance, gym membership and pension after qualifying period
02/05/2024
Full time
I am now working closely with an organisation who supplies packaging machinery to the corrugated industry. Role involves installing, commissioning and removing machinery at customer sites across the country and internationally. Requires frequent travel and staying away from home, occasionally including weekends. Preferred skills: Experience in the corrugated industry Control panel building, wiring & testing HMI and PLC programming Job benefits include: Competitive pay with overtime rates PPE and workwear provided Allowances for food and accommodation while travelling Company vehicle and credits cards Health insurance, gym membership and pension after qualifying period
FIELD SERVICE ENGINEER Covering UK&IRE £40,000 - £50,000 + Excellent benefits Monday - Friday - door to door (44 hours) One of the UK's leading suppliers of highly complex process sterilisation and quality process equipment is now recruiting for a Field Service Engineer to join their busy and expanding field service engineering team to cover UK&IRE. As the field service engineer, you will be required to travel to customer sites in the pharmaceutical and life-sciences field, carrying out repair and maintenance on a diverse range of technologies including autoclaves/sterilisers, RO systems, steam generators etc. Key responsibilities as the Field Service Engineer: You will be required to travel across the UK and Ireland and will include nights away from home. Provide preventative maintenance, calibration and technical support, to a standard consistent with the high quality of the equipment and services the organisation supply and with the reasonable expectations of the customers. Undertake fault finding/rectification assignments as delegated by the management team Creating, preparing and managing servicing and calibration documentation as delegated by the management team Managing specific service spares Role specific administration such as reporting, expenses, and time sheets Proper management of the organisations equipment, including test equipment, computer equipment etc. Support the training of other Field Service Engineers Provide FAT support as required. Additional administrative duties as required, including but not limited to, protocol review, document creation as per QMS. Adhering to policies and procedures at all times Experience required - Field Service Engineer: ONC/HNC or equivalent in engineering (mechanical, electrical, electronic etc.) Multi-skilled engineer who has carried out service, repair and maintenance on industrial sized electro-mechanical machinery Industry background could be; FMCG, Ex-Military (Navy, REME, RAF etc.), Automation, Robotics, Pharmaceutical, Biotechnology, Semi-Conductor, Oil & Gas etc. Flexible to travel and stay away as and when required as a field service engineer Valid, UK driving licence Package/benefits: £40,000 - £50,000 depending on experience Company performance bonus Paid overtime x1.5 - Monday Friday any hours over 44 hrs (door to door travel) Overnight stay allowance - £20 for first night away raising an extra £10 per night for consecutive nights (Capped at £110/night). Once fully out on your own - Night 1-4 -£62 p/n, nights 5-7 - £80 p/n, nights 8 onwards is £100p/n. Lunch allowance Company vehicle included for personal use or the option for business use only Company Pension scheme 25 dyas holiday + bank Company phone & laptop Tools and uniform supplied Annual salary reviews (linked to inflation) plus continuously review salary in relation to performance. If you are and experienced multi-skilled field service engineer interested in making an application, please click APPLY NOW and a CBSbutler representative will be in touch to discuss this exciting opportunity.
02/05/2024
Full time
FIELD SERVICE ENGINEER Covering UK&IRE £40,000 - £50,000 + Excellent benefits Monday - Friday - door to door (44 hours) One of the UK's leading suppliers of highly complex process sterilisation and quality process equipment is now recruiting for a Field Service Engineer to join their busy and expanding field service engineering team to cover UK&IRE. As the field service engineer, you will be required to travel to customer sites in the pharmaceutical and life-sciences field, carrying out repair and maintenance on a diverse range of technologies including autoclaves/sterilisers, RO systems, steam generators etc. Key responsibilities as the Field Service Engineer: You will be required to travel across the UK and Ireland and will include nights away from home. Provide preventative maintenance, calibration and technical support, to a standard consistent with the high quality of the equipment and services the organisation supply and with the reasonable expectations of the customers. Undertake fault finding/rectification assignments as delegated by the management team Creating, preparing and managing servicing and calibration documentation as delegated by the management team Managing specific service spares Role specific administration such as reporting, expenses, and time sheets Proper management of the organisations equipment, including test equipment, computer equipment etc. Support the training of other Field Service Engineers Provide FAT support as required. Additional administrative duties as required, including but not limited to, protocol review, document creation as per QMS. Adhering to policies and procedures at all times Experience required - Field Service Engineer: ONC/HNC or equivalent in engineering (mechanical, electrical, electronic etc.) Multi-skilled engineer who has carried out service, repair and maintenance on industrial sized electro-mechanical machinery Industry background could be; FMCG, Ex-Military (Navy, REME, RAF etc.), Automation, Robotics, Pharmaceutical, Biotechnology, Semi-Conductor, Oil & Gas etc. Flexible to travel and stay away as and when required as a field service engineer Valid, UK driving licence Package/benefits: £40,000 - £50,000 depending on experience Company performance bonus Paid overtime x1.5 - Monday Friday any hours over 44 hrs (door to door travel) Overnight stay allowance - £20 for first night away raising an extra £10 per night for consecutive nights (Capped at £110/night). Once fully out on your own - Night 1-4 -£62 p/n, nights 5-7 - £80 p/n, nights 8 onwards is £100p/n. Lunch allowance Company vehicle included for personal use or the option for business use only Company Pension scheme 25 dyas holiday + bank Company phone & laptop Tools and uniform supplied Annual salary reviews (linked to inflation) plus continuously review salary in relation to performance. If you are and experienced multi-skilled field service engineer interested in making an application, please click APPLY NOW and a CBSbutler representative will be in touch to discuss this exciting opportunity.
A global medical device company are looking for a Mechanical Engineer to join their Engineering team on a contract basis. Your role will be to help design and develop their products. Understanding everything that is required to build prints, put in specifications, tolerances and best practices. More focus will be around how you design the system that is going to work. Have a system design but the role is all about optimisation. A combination of devising tests, revising, analysis of the tests and providing further direction. Essential skills: Designing experience Testing experience Data analysis experience Writing design specifications Desirable skills: Medical device or other regulated industry experience Microfluidics experience The start date is for ASAP. The initial contract length is for 6 months (with extension options after). The role is based in County Tipperary and will require 3 days onsite per week, the rest of the time you can work remotely. The rate is €60 per hour, depending on experience, if you have any expenses please let me know and I can factor that into the rate for you. If you are interested in the role please send me your latest CV and I will call you to discuss the further details. Please visit our website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Real Staffing, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy| Registered office | London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
01/05/2024
Project-based
A global medical device company are looking for a Mechanical Engineer to join their Engineering team on a contract basis. Your role will be to help design and develop their products. Understanding everything that is required to build prints, put in specifications, tolerances and best practices. More focus will be around how you design the system that is going to work. Have a system design but the role is all about optimisation. A combination of devising tests, revising, analysis of the tests and providing further direction. Essential skills: Designing experience Testing experience Data analysis experience Writing design specifications Desirable skills: Medical device or other regulated industry experience Microfluidics experience The start date is for ASAP. The initial contract length is for 6 months (with extension options after). The role is based in County Tipperary and will require 3 days onsite per week, the rest of the time you can work remotely. The rate is €60 per hour, depending on experience, if you have any expenses please let me know and I can factor that into the rate for you. If you are interested in the role please send me your latest CV and I will call you to discuss the further details. Please visit our website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Real Staffing, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy| Registered office | London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
The Company An exciting new Service Engineering opportunity is now available within an industry leading provider of medical imaging systems. Training is provided and so this employer offers a rare opportunity for engineers with no medical experience to break into the much sought after medical field. Through organic growth along with the acquisition of other companies, you would be joining this organisation during an exciting period of expansion. The Role As a Field Service Engineer you would be part of the Service Engineering team carrying out installations, planned and reactive maintenance as well as break down repair work on a range of dental, head and neck medical imaging systems. The Location This role will predominantly involve travel to hospitals and other customer sites in and around the Bristol, Bath and Yeovil ares and so ideally applicants will live local to these areas. However, flexibility to travel further afield when necessary will be required. Training Training is provided. This employer regularly hires engineers from non-medical industries who have transferable electro-mechanical repair and software installation/upgrade skills. Therefore, a comprehensive, "tried and tested" training plan is in place to ensure you are well supported and appropriately upskilled. The Package £33,000 - £40,000 £5/d per day lunch allowance A choice of a company car or car allowance paid at £5,400 Statutory pension Life assurance 33 days annual leave (including bank holidays) Training on medical imaging equipment What experience is required to apply? Strong electro-mechanical service, fault finding and repair skills Experience with networking or software installations or upgrades Excellent customer service and team work skills Positive attitude and willingness to learn An enjoyment of driving and flexibility to travel as part of a field based role Living in or near to Bristol, Bath or Yeovil areas Next steps? Click APPLY NOW for a copy of your CV to be sent to CBSbutler. Should you be suitable a CBSbutler representative will be in touch within 3 working days.
01/05/2024
Full time
The Company An exciting new Service Engineering opportunity is now available within an industry leading provider of medical imaging systems. Training is provided and so this employer offers a rare opportunity for engineers with no medical experience to break into the much sought after medical field. Through organic growth along with the acquisition of other companies, you would be joining this organisation during an exciting period of expansion. The Role As a Field Service Engineer you would be part of the Service Engineering team carrying out installations, planned and reactive maintenance as well as break down repair work on a range of dental, head and neck medical imaging systems. The Location This role will predominantly involve travel to hospitals and other customer sites in and around the Bristol, Bath and Yeovil ares and so ideally applicants will live local to these areas. However, flexibility to travel further afield when necessary will be required. Training Training is provided. This employer regularly hires engineers from non-medical industries who have transferable electro-mechanical repair and software installation/upgrade skills. Therefore, a comprehensive, "tried and tested" training plan is in place to ensure you are well supported and appropriately upskilled. The Package £33,000 - £40,000 £5/d per day lunch allowance A choice of a company car or car allowance paid at £5,400 Statutory pension Life assurance 33 days annual leave (including bank holidays) Training on medical imaging equipment What experience is required to apply? Strong electro-mechanical service, fault finding and repair skills Experience with networking or software installations or upgrades Excellent customer service and team work skills Positive attitude and willingness to learn An enjoyment of driving and flexibility to travel as part of a field based role Living in or near to Bristol, Bath or Yeovil areas Next steps? Click APPLY NOW for a copy of your CV to be sent to CBSbutler. Should you be suitable a CBSbutler representative will be in touch within 3 working days.
A leading Defence client of ours is currently looking for a Principal Systems Engineer within their Defence team to work on a variety of safety/mission critical projects. The right candidate will be responsible for understanding the customers complex needs and developing, validating & managing Systems requirements at all levels. What you'll be doing: * Developing complex system architectures and sub-systems using a Model Based Systems Engineering approach * Integration, analysis and test of Real Time systems containing multiple technical disciplines such as electronic, mechanical, optical and software sub-systems. * Taking accountability for collaborative technical work package execution and associated outcomes * Providing guidance, coaching and nurturing talent in other engineers * Verifying that customer needs are satisfied * Steering new and improved systems development through implementation whilst making use of best practice systems life cycle processes alongside techniques such as Learn First and Agile Your skills and experiences: Essential: * Proven experience developing systems in relevant product markets and/or domains, such as control systems, Real Time displays or other safety related systems * Proven experience in requirements management, design analyses, modelling and simulation, using tools such as DOORS, Siemens Polarion, Enterprise Architect, MATLAB and/or Simulink and design methodologies such as SysML * A degree or equivalent qualification in a relevant Scientific/Engineering subject (eg Systems Engineering, Electronic Engineering, Physics or Mathematics) Desirable: * Experience in integration, test, and/or verification of Real Time and/or safety related systems * Understanding of safety assessment processes including how these processes influence the design * Customer and/or supplier liaison experience for technical aspects, verifying and obtaining agreement that customer needs are satisfied * An understanding of information assurance, cyber security and environmental impact aspects relating to Real Time Embedded engineering products Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
30/04/2024
Full time
A leading Defence client of ours is currently looking for a Principal Systems Engineer within their Defence team to work on a variety of safety/mission critical projects. The right candidate will be responsible for understanding the customers complex needs and developing, validating & managing Systems requirements at all levels. What you'll be doing: * Developing complex system architectures and sub-systems using a Model Based Systems Engineering approach * Integration, analysis and test of Real Time systems containing multiple technical disciplines such as electronic, mechanical, optical and software sub-systems. * Taking accountability for collaborative technical work package execution and associated outcomes * Providing guidance, coaching and nurturing talent in other engineers * Verifying that customer needs are satisfied * Steering new and improved systems development through implementation whilst making use of best practice systems life cycle processes alongside techniques such as Learn First and Agile Your skills and experiences: Essential: * Proven experience developing systems in relevant product markets and/or domains, such as control systems, Real Time displays or other safety related systems * Proven experience in requirements management, design analyses, modelling and simulation, using tools such as DOORS, Siemens Polarion, Enterprise Architect, MATLAB and/or Simulink and design methodologies such as SysML * A degree or equivalent qualification in a relevant Scientific/Engineering subject (eg Systems Engineering, Electronic Engineering, Physics or Mathematics) Desirable: * Experience in integration, test, and/or verification of Real Time and/or safety related systems * Understanding of safety assessment processes including how these processes influence the design * Customer and/or supplier liaison experience for technical aspects, verifying and obtaining agreement that customer needs are satisfied * An understanding of information assurance, cyber security and environmental impact aspects relating to Real Time Embedded engineering products Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Lead Electrical Engineer - Inside IR35 - €750 per day! We are recruiting an Electrical Engineer for a project in County Clare, Ireland, which is expected to run until the end of February 2026. Our client is in the process of transitioning a power station's primary fuel from coal to heavy fuel oil. The works require the construction of two new heavy fuel oil tanks, new auxiliary boilers, new ash injection system, upgrade of the existing HFO Systems, ancillary systems and modifications to the existing site infrastructure. As an Electrical Engineer you will be tasked to manage the key responsibilities which are listed below: - Perform role of lead electrical engineer and be responsible for the electrical engineering works on site for the successful delivery of the emergency generation projects. Manage Site teams (as required), and liaison with Station Electrical and Instrumentation (E&I) teams. Liaise with Control & Instrumentation, Mechanical and Civil design teams to ensure delivery co-ordination on multi-disciplinary projects. Ensure that electrical systems are installed, tested, and operated safely and efficiently in accordance with regulations, standards, and guidelines. Co-ordinate electrical testing and commissioning activities on Low Voltage (LV), Medium Voltage (MV) and High Voltage (HV) systems and provide advice on testing and commissioning procedures and documentation. Support the management of projects from installation, commissioning, and handover. Support the team of electrical engineers delivering engineering design and support services for generating technologies. Support for the Safety Systems at site and apply a high level of safety standards in every aspect of the work. Skills and Experience Proven track record of significant experience in the power generation industry. A minimum of 7 years' relevant experience is required. Design, and Construction or Commissioning experience, is preferred. Extensive knowledge of electrical equipment utilised in power plant projects, preferably including LV and MV Proven ability to deliver on the key responsibilities outlined above. A proven track record in delivering complex engineering projects and ability to manage multiple projects. Experience of Project Management tools would be an advantage. Working knowledge of Health, Safety and Environment Standards, and Electrical Safety procedures An EU/British passport will be required for this role, as the role requires onsite working Monday to Friday. The daily rate on offer is €750 all-inclusive (no expenses). Further information is available upon request.
30/04/2024
Project-based
Lead Electrical Engineer - Inside IR35 - €750 per day! We are recruiting an Electrical Engineer for a project in County Clare, Ireland, which is expected to run until the end of February 2026. Our client is in the process of transitioning a power station's primary fuel from coal to heavy fuel oil. The works require the construction of two new heavy fuel oil tanks, new auxiliary boilers, new ash injection system, upgrade of the existing HFO Systems, ancillary systems and modifications to the existing site infrastructure. As an Electrical Engineer you will be tasked to manage the key responsibilities which are listed below: - Perform role of lead electrical engineer and be responsible for the electrical engineering works on site for the successful delivery of the emergency generation projects. Manage Site teams (as required), and liaison with Station Electrical and Instrumentation (E&I) teams. Liaise with Control & Instrumentation, Mechanical and Civil design teams to ensure delivery co-ordination on multi-disciplinary projects. Ensure that electrical systems are installed, tested, and operated safely and efficiently in accordance with regulations, standards, and guidelines. Co-ordinate electrical testing and commissioning activities on Low Voltage (LV), Medium Voltage (MV) and High Voltage (HV) systems and provide advice on testing and commissioning procedures and documentation. Support the management of projects from installation, commissioning, and handover. Support the team of electrical engineers delivering engineering design and support services for generating technologies. Support for the Safety Systems at site and apply a high level of safety standards in every aspect of the work. Skills and Experience Proven track record of significant experience in the power generation industry. A minimum of 7 years' relevant experience is required. Design, and Construction or Commissioning experience, is preferred. Extensive knowledge of electrical equipment utilised in power plant projects, preferably including LV and MV Proven ability to deliver on the key responsibilities outlined above. A proven track record in delivering complex engineering projects and ability to manage multiple projects. Experience of Project Management tools would be an advantage. Working knowledge of Health, Safety and Environment Standards, and Electrical Safety procedures An EU/British passport will be required for this role, as the role requires onsite working Monday to Friday. The daily rate on offer is €750 all-inclusive (no expenses). Further information is available upon request.
Mechanical Design Engineer Portsmouth Up to £40k Progressive GE and an Engineering Innovator in Mechanical Systems & Products for Defence, Rail, Aerospace, Marine & Medical Sectors are looking to recruit a Mechanical Design Engineer on a Staff basis, for their Engineering & Manufacturing HQ based near Portsmouth, due to significant business growth and project pipeline for onwards. Reporting in the Chief Mechanical Engineer, the Mechanical Design Engineer will be responsible for the full life cycle design (from concept) of complex Mechanical Systems & Products for safety-critical & regulated industries, including Defence, Rail, Aerospace, Marine & Medical applications. Working within a multi-disciplinary engineering team, the Mechanical Design Engineer will be responsible for: Producing concept & detailed designs using CAD Software, including design schemes, detailed design & manufacturing drawings, reports & associated documentation Conduct and/or support Stress & Safety Analysis (though calculations & analysis software) Contribute to qualification test schedules (test definitions) and witness testing Provide support for failure investigations. Experience, Qualifications & Experience Required for Mechanical Design Engineer Role: HND or Degree in Mechanical Engineering or similar (Automotive Engineering, Aerospace Engineering, Aeronautical Engineering etc) 3D CAD Design experience (Concept & Detailed) & ability to use FEA software/create hand and software-based calculations Industrial experience designing complex mechanical systems and/or products for regulated industries/safety-critical environments, working to industry standards, codes & regulations. GA & Detailed Design experience, as well as DFM, including fabrication, welding & machining processes Knowledge of metallic materials (incl. mechanical, static & fatigue properties) Ability to write reports and specifications. For the successful Mechanical Design Engineer, a salary of up to £40k + Benefits is on offer and my client work a 37 hour working week (0730 - 1600 Monday to Thursday, Friday) and this Mechanical Design Engineer role is 5 days on-site and commutable from Southampton, Hamble, Fareham, Eastleigh, Waterlooville, Chichester, Winchester, Bognor Regis & Havant. PLEASE NOTE THAT THIS MECHANICAL DESIGN ENGINEER ROLE IS A STAFF/PERMANENT POSITION AND THE SUCCESSFUL CANDIDATE WILL NEED TO BE ELIGIBLE TO BE SECURITY CLEARED. To be considered for this Mechanical Design Engineer role, please apply via the link below To find out more about Progressive Recruitment please visit our website Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
30/04/2024
Full time
Mechanical Design Engineer Portsmouth Up to £40k Progressive GE and an Engineering Innovator in Mechanical Systems & Products for Defence, Rail, Aerospace, Marine & Medical Sectors are looking to recruit a Mechanical Design Engineer on a Staff basis, for their Engineering & Manufacturing HQ based near Portsmouth, due to significant business growth and project pipeline for onwards. Reporting in the Chief Mechanical Engineer, the Mechanical Design Engineer will be responsible for the full life cycle design (from concept) of complex Mechanical Systems & Products for safety-critical & regulated industries, including Defence, Rail, Aerospace, Marine & Medical applications. Working within a multi-disciplinary engineering team, the Mechanical Design Engineer will be responsible for: Producing concept & detailed designs using CAD Software, including design schemes, detailed design & manufacturing drawings, reports & associated documentation Conduct and/or support Stress & Safety Analysis (though calculations & analysis software) Contribute to qualification test schedules (test definitions) and witness testing Provide support for failure investigations. Experience, Qualifications & Experience Required for Mechanical Design Engineer Role: HND or Degree in Mechanical Engineering or similar (Automotive Engineering, Aerospace Engineering, Aeronautical Engineering etc) 3D CAD Design experience (Concept & Detailed) & ability to use FEA software/create hand and software-based calculations Industrial experience designing complex mechanical systems and/or products for regulated industries/safety-critical environments, working to industry standards, codes & regulations. GA & Detailed Design experience, as well as DFM, including fabrication, welding & machining processes Knowledge of metallic materials (incl. mechanical, static & fatigue properties) Ability to write reports and specifications. For the successful Mechanical Design Engineer, a salary of up to £40k + Benefits is on offer and my client work a 37 hour working week (0730 - 1600 Monday to Thursday, Friday) and this Mechanical Design Engineer role is 5 days on-site and commutable from Southampton, Hamble, Fareham, Eastleigh, Waterlooville, Chichester, Winchester, Bognor Regis & Havant. PLEASE NOTE THAT THIS MECHANICAL DESIGN ENGINEER ROLE IS A STAFF/PERMANENT POSITION AND THE SUCCESSFUL CANDIDATE WILL NEED TO BE ELIGIBLE TO BE SECURITY CLEARED. To be considered for this Mechanical Design Engineer role, please apply via the link below To find out more about Progressive Recruitment please visit our website Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
FIELD SERVICE ENGINEER Medical Imaging Equipment The Company An exciting new Service Engineering opportunity is now available within an industry leading provider of medical imaging systems. Training is provided and so this employer offers a rare opportunity for engineers with no medical experience to break into the much sought after medical field. Through organic growth along with the acquisition of other companies, you would be joining this organisation during an exciting period of expansion. The Role As a Field Service Engineer you would be part of the Service Engineering team carrying out installations, planned and reactive maintenance as well as break down repair work on a range of medical imaging systems such as MRIs, CTs, X-Rays and Ultrasounds. You would be responsible for managing customers assigned to you, hospitals, predominantly in the South West of England. However, as with any field based role, flexibility to travel further afield will be required on occasions should this be required by the wider team and business. The Location This role will predominantly involve travel in and around the South West of England, ideally living in and around the Bristol/Bath/Yeovil areas. However, flexibility to travel is essential. Training Training is provided. This employer regularly hires engineers from non-medical industries who have transferable electro-mechanical repair and software installation/upgrade skills. Therefore, a comprehensive, "tried and tested" training plan is in place to ensure you are well supported and appropriately upskilled. The Package £37,000 - £40,000 per year basic salary Company car or £5,400 car allowance Paid overtime (x1.5 Mon- Fri, x2 Sun/BH) Private pension Group income protection 25 days' holiday + bank Hours are Monday - Friday 43.5 hrs including travel What experience is required to apply? Strong electro-mechanical service, fault finding and repair skills Experience with software installations or upgrades Excellent customer service and team work skills Positive attitude and willingness to learn An enjoyment of driving and flexibility to travel as part of a field based role Living within a reasonable distance of Bristol/Bath/Yeovil If you are an engineer wanting to break into a highly sought after industry working complex medical imaging equipment, then click APPLY NOW to begin your application!
30/04/2024
Full time
FIELD SERVICE ENGINEER Medical Imaging Equipment The Company An exciting new Service Engineering opportunity is now available within an industry leading provider of medical imaging systems. Training is provided and so this employer offers a rare opportunity for engineers with no medical experience to break into the much sought after medical field. Through organic growth along with the acquisition of other companies, you would be joining this organisation during an exciting period of expansion. The Role As a Field Service Engineer you would be part of the Service Engineering team carrying out installations, planned and reactive maintenance as well as break down repair work on a range of medical imaging systems such as MRIs, CTs, X-Rays and Ultrasounds. You would be responsible for managing customers assigned to you, hospitals, predominantly in the South West of England. However, as with any field based role, flexibility to travel further afield will be required on occasions should this be required by the wider team and business. The Location This role will predominantly involve travel in and around the South West of England, ideally living in and around the Bristol/Bath/Yeovil areas. However, flexibility to travel is essential. Training Training is provided. This employer regularly hires engineers from non-medical industries who have transferable electro-mechanical repair and software installation/upgrade skills. Therefore, a comprehensive, "tried and tested" training plan is in place to ensure you are well supported and appropriately upskilled. The Package £37,000 - £40,000 per year basic salary Company car or £5,400 car allowance Paid overtime (x1.5 Mon- Fri, x2 Sun/BH) Private pension Group income protection 25 days' holiday + bank Hours are Monday - Friday 43.5 hrs including travel What experience is required to apply? Strong electro-mechanical service, fault finding and repair skills Experience with software installations or upgrades Excellent customer service and team work skills Positive attitude and willingness to learn An enjoyment of driving and flexibility to travel as part of a field based role Living within a reasonable distance of Bristol/Bath/Yeovil If you are an engineer wanting to break into a highly sought after industry working complex medical imaging equipment, then click APPLY NOW to begin your application!
Mechanical Design Engineer Portsmouth Up to £40k Are you a Mechanical Design Engineer/Design Engineer/CAE Engineer and a problem solver when it comes to Engineering challenges? Do you have concept design experience, designing complex mechanical systems & products for safety-critical & regulated industries, including Defence, Aerospace, Marine & Medical? Do you have DFM experience, inc. Welding, Machining & Fabrication Processes? If so, then please see below Mechanical Design Engineer Portsmouth Up to £40k Progressive GE and an Engineering Innovator in Mechanical Systems & Products for Defence, Aerospace, Marine & Medical Sectors are looking to recruit a Mechanical Design Engineer on a Staff basis, for their Engineering & Manufacturing HQ based near Portsmouth, due to significant business growth and project pipeline for onwards. Reporting in the Chief Mechanical Engineer, the Mechanical Design Engineer will be responsible for the full life cycle design (from concept) of complex Mechanical Systems & Products for safety-critical & regulated industries, including Defence, Rail, Aerospace, Marine & Medical applications. Working within a multi-disciplinary engineering team, the Mechanical Design Engineer will be responsible for: Producing concept & detailed designs using CAD Software, including design schemes, detailed design & manufacturing drawings, reports & associated documentation Conduct and/or support Stress & Safety Analysis (though calculations & analysis software) Contribute to qualification test schedules (test definitions) and witness testing Provide support for failure investigations. Experience, Qualifications & Experience Required for Mechanical Design Engineer Role: HND or Degree in Mechanical Engineering or similar (Automotive Engineering, Aerospace Engineering, Aeronautical Engineering etc) 3D CAD Design experience (Concept & Detailed) & ability to use FEA software/create hand and software-based calculations Industrial experience designing complex mechanical systems and/or products for regulated industries/safety-critical environments, working to industry standards, codes & regulations. GA & Detailed Design experience, as well as DFM, including fabrication, welding & machining processes Knowledge of metallic materials (incl. mechanical, static & fatigue properties) Ability to write reports and specifications. For the successful Mechanical Design Engineer, a salary of up to £40k + Benefits is on offer and my client work a 37 hour working week (0730 - 1600 Monday to Thursday, Friday) and this Mechanical Design Engineer role is 5 days on-site and commutable from Southampton, Hamble, Fareham, Eastleigh, Waterlooville, Chichester, Winchester, Bognor Regis & Havant. PLEASE NOTE THAT THIS MECHANICAL DESIGN ENGINEER ROLE IS A STAFF/PERMANENT POSITION AND THE SUCCESSFUL CANDIDATE WILL NEED TO BE ELIGIBLE TO BE SECURITY CLEARED. To be considered for this Mechanical Design Engineer role, please apply via the link below To find out more about Progressive Recruitment please visit our website Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
30/04/2024
Full time
Mechanical Design Engineer Portsmouth Up to £40k Are you a Mechanical Design Engineer/Design Engineer/CAE Engineer and a problem solver when it comes to Engineering challenges? Do you have concept design experience, designing complex mechanical systems & products for safety-critical & regulated industries, including Defence, Aerospace, Marine & Medical? Do you have DFM experience, inc. Welding, Machining & Fabrication Processes? If so, then please see below Mechanical Design Engineer Portsmouth Up to £40k Progressive GE and an Engineering Innovator in Mechanical Systems & Products for Defence, Aerospace, Marine & Medical Sectors are looking to recruit a Mechanical Design Engineer on a Staff basis, for their Engineering & Manufacturing HQ based near Portsmouth, due to significant business growth and project pipeline for onwards. Reporting in the Chief Mechanical Engineer, the Mechanical Design Engineer will be responsible for the full life cycle design (from concept) of complex Mechanical Systems & Products for safety-critical & regulated industries, including Defence, Rail, Aerospace, Marine & Medical applications. Working within a multi-disciplinary engineering team, the Mechanical Design Engineer will be responsible for: Producing concept & detailed designs using CAD Software, including design schemes, detailed design & manufacturing drawings, reports & associated documentation Conduct and/or support Stress & Safety Analysis (though calculations & analysis software) Contribute to qualification test schedules (test definitions) and witness testing Provide support for failure investigations. Experience, Qualifications & Experience Required for Mechanical Design Engineer Role: HND or Degree in Mechanical Engineering or similar (Automotive Engineering, Aerospace Engineering, Aeronautical Engineering etc) 3D CAD Design experience (Concept & Detailed) & ability to use FEA software/create hand and software-based calculations Industrial experience designing complex mechanical systems and/or products for regulated industries/safety-critical environments, working to industry standards, codes & regulations. GA & Detailed Design experience, as well as DFM, including fabrication, welding & machining processes Knowledge of metallic materials (incl. mechanical, static & fatigue properties) Ability to write reports and specifications. For the successful Mechanical Design Engineer, a salary of up to £40k + Benefits is on offer and my client work a 37 hour working week (0730 - 1600 Monday to Thursday, Friday) and this Mechanical Design Engineer role is 5 days on-site and commutable from Southampton, Hamble, Fareham, Eastleigh, Waterlooville, Chichester, Winchester, Bognor Regis & Havant. PLEASE NOTE THAT THIS MECHANICAL DESIGN ENGINEER ROLE IS A STAFF/PERMANENT POSITION AND THE SUCCESSFUL CANDIDATE WILL NEED TO BE ELIGIBLE TO BE SECURITY CLEARED. To be considered for this Mechanical Design Engineer role, please apply via the link below To find out more about Progressive Recruitment please visit our website Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
29/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
Clearwater People Solutions
Manchester, Lancashire
ATTENTION! Plumbers/Mechanical Engineers Wanted! Build your experience further with this fantastic opportunity as a Plumber/Mechanical Engineer, installing, servicing and testing various appliances within a specific location. This vacancy is a 3-6 month contract, with a possibility to go permanent. Key Responsibilities for the Plumber/Mechanical Engineer: Complete all statutory and non-statutory maintenance in accordance with set maintenance schedules and contract SLA's. Complete reactive works in line with contract SLA's/ Sound awareness of risk assessment and working safely with equipment. Ability to measure, work to plans, reach technical diagrams and communicate, present and report technical information as appropriate to trade/skill Skills Required for the Plumber/Mechanical Engineer: NVQ Level 3 in plumbing/heating/air conditioning/mechanical engineering (Essential) Sound knowledge of Health & Safety including ISO9001 & 14,001. Experience of working on Commercial Hot & Cold water systems is essential. Approved and formal apprenticeship served in plumbing/mechanical skills area required or relevant and practical experience within a similar industry Experience in the maintenance of: Heating and domestic water services, TMV's, Air handling units, Manage Plant Rooms, including Steam Pipes If this role is of interest, please apply for additional information or contact Thomas Edevane.
29/04/2024
ATTENTION! Plumbers/Mechanical Engineers Wanted! Build your experience further with this fantastic opportunity as a Plumber/Mechanical Engineer, installing, servicing and testing various appliances within a specific location. This vacancy is a 3-6 month contract, with a possibility to go permanent. Key Responsibilities for the Plumber/Mechanical Engineer: Complete all statutory and non-statutory maintenance in accordance with set maintenance schedules and contract SLA's. Complete reactive works in line with contract SLA's/ Sound awareness of risk assessment and working safely with equipment. Ability to measure, work to plans, reach technical diagrams and communicate, present and report technical information as appropriate to trade/skill Skills Required for the Plumber/Mechanical Engineer: NVQ Level 3 in plumbing/heating/air conditioning/mechanical engineering (Essential) Sound knowledge of Health & Safety including ISO9001 & 14,001. Experience of working on Commercial Hot & Cold water systems is essential. Approved and formal apprenticeship served in plumbing/mechanical skills area required or relevant and practical experience within a similar industry Experience in the maintenance of: Heating and domestic water services, TMV's, Air handling units, Manage Plant Rooms, including Steam Pipes If this role is of interest, please apply for additional information or contact Thomas Edevane.
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
29/04/2024
Project-based
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.