An Electrical/Electronic Engineer is required for a contract assignment with a multi-national leading defence company. Missile Architecture - Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support. It's an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: a) Specifying/determining * system electrical requirements * interface definitions and characteristics between subsystems/equipment * power architecture, including power budget and power profiles * data communication and processing architecture * requirements for EMC, bonding, grounding and screening * signal safety, including routing of safety related signals b) Supporting test and fault-finding activities during compatibility checks, risk reduction, system proving/qualification and integration c) Reviewing and authoring reports, guidelines and processes d) Design assessments and analysis e) Working to defence/industry standards f) Attending and supporting design reviews Alternatively, acting as the Equipment Manager (RMO) for specific electrical/electronic equipment(s) that are part of a missile or launcher system you will: a) Project manage the equipment(s) on behalf of the project during development, qualification and manufacture b) Own the requirements on behalf of the project for the equipment(s) c) Produce Statement(s) of Work for the associated design authority for the equipment(s) d) Create and update plans showing activities for the equipment(s) e) Manage internal & external design authorities for delivery of the equipment(s) hardware, software and deliverables to schedule, cost, quality and performance f) Hold regular progress reviews with the design authority for the equipment(s) g) Review qualification verification evidence h) Track and find resolution to equipment non-compliances i) Attend and support design reviews Skillset/experience required: Technical experience required: * electrical/electronics * interface definitions * knowledge of defence/industry standards, etc. * degree level qualification in a related subject * systems engineering * writing reports Ideally this would be within a defence related background, however, experience within other engineering industries will also be considered. Experience within these other areas are also of interest but not essential: * defence * weapon systems * power supplies * actuators * data communication * sensors * EMC * Health Usage Monitoring Systems (HUMS) * Model Based Engineering (MBE) Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
01/05/2024
Project-based
An Electrical/Electronic Engineer is required for a contract assignment with a multi-national leading defence company. Missile Architecture - Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support. It's an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: a) Specifying/determining * system electrical requirements * interface definitions and characteristics between subsystems/equipment * power architecture, including power budget and power profiles * data communication and processing architecture * requirements for EMC, bonding, grounding and screening * signal safety, including routing of safety related signals b) Supporting test and fault-finding activities during compatibility checks, risk reduction, system proving/qualification and integration c) Reviewing and authoring reports, guidelines and processes d) Design assessments and analysis e) Working to defence/industry standards f) Attending and supporting design reviews Alternatively, acting as the Equipment Manager (RMO) for specific electrical/electronic equipment(s) that are part of a missile or launcher system you will: a) Project manage the equipment(s) on behalf of the project during development, qualification and manufacture b) Own the requirements on behalf of the project for the equipment(s) c) Produce Statement(s) of Work for the associated design authority for the equipment(s) d) Create and update plans showing activities for the equipment(s) e) Manage internal & external design authorities for delivery of the equipment(s) hardware, software and deliverables to schedule, cost, quality and performance f) Hold regular progress reviews with the design authority for the equipment(s) g) Review qualification verification evidence h) Track and find resolution to equipment non-compliances i) Attend and support design reviews Skillset/experience required: Technical experience required: * electrical/electronics * interface definitions * knowledge of defence/industry standards, etc. * degree level qualification in a related subject * systems engineering * writing reports Ideally this would be within a defence related background, however, experience within other engineering industries will also be considered. Experience within these other areas are also of interest but not essential: * defence * weapon systems * power supplies * actuators * data communication * sensors * EMC * Health Usage Monitoring Systems (HUMS) * Model Based Engineering (MBE) Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
Calling All Tidal Power Pioneers! Are you electrified by innovation and powered by passion? Do you dream of designing systems that harness the mighty dance of the tides? If you're nodding your head like a buoy in high tide, then continue reading as this Electrical & Automation Manager may be your next destination. You would be the technical captain of our electrical and automation systems , steering the generator power circuit, auxiliary power circuit, instrumentation, and communication systems. You would champion product development initiatives that align with the technology development roadmap, like a true tidal trailblazer. You will be able to apply your d eep understanding of LV, MV, and HV systems . You enjoy articulating requirements and concept designs with the clarity of a calm sea, enabling our partners to bring your visions to life. You enjoy the c hallenge of navigating the selection and management of specialist partners and suppliers like a seasoned skipper. You can apply your technical lead experience in ensuring a smooth process leading the delivery team through all stages of the product life cycle, from the first sketch to the final wave of installation . You will be able to s et the course for tender pricing, budgeting, and cost control, keeping our ship on a steady financial keel. You will have the autonomy to develop and refine standards and processes, making sure our electrical and automation systems are as reliable as the tides. This role would s uit a senior level candidate with demonstrated success in managing electrical and automation system delivery both UK and Internationally. This role is based in Bristol, you can expect a salary package up to £80,000 per annum as well as hybrid working, excellent career progression opportunities and a great working culture. If being at the forefront of tidal power technology with a company that leads product development and offshore services sounds like your cup of tea then please apply with your CV and we can arrange an initial chat to discuss further. *Unfortunately candidates not residing in the UK or require sponsorship will not be eligible to apply* To find out more about Progressive Recruitment please visit the website. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
30/04/2024
Full time
Calling All Tidal Power Pioneers! Are you electrified by innovation and powered by passion? Do you dream of designing systems that harness the mighty dance of the tides? If you're nodding your head like a buoy in high tide, then continue reading as this Electrical & Automation Manager may be your next destination. You would be the technical captain of our electrical and automation systems , steering the generator power circuit, auxiliary power circuit, instrumentation, and communication systems. You would champion product development initiatives that align with the technology development roadmap, like a true tidal trailblazer. You will be able to apply your d eep understanding of LV, MV, and HV systems . You enjoy articulating requirements and concept designs with the clarity of a calm sea, enabling our partners to bring your visions to life. You enjoy the c hallenge of navigating the selection and management of specialist partners and suppliers like a seasoned skipper. You can apply your technical lead experience in ensuring a smooth process leading the delivery team through all stages of the product life cycle, from the first sketch to the final wave of installation . You will be able to s et the course for tender pricing, budgeting, and cost control, keeping our ship on a steady financial keel. You will have the autonomy to develop and refine standards and processes, making sure our electrical and automation systems are as reliable as the tides. This role would s uit a senior level candidate with demonstrated success in managing electrical and automation system delivery both UK and Internationally. This role is based in Bristol, you can expect a salary package up to £80,000 per annum as well as hybrid working, excellent career progression opportunities and a great working culture. If being at the forefront of tidal power technology with a company that leads product development and offshore services sounds like your cup of tea then please apply with your CV and we can arrange an initial chat to discuss further. *Unfortunately candidates not residing in the UK or require sponsorship will not be eligible to apply* To find out more about Progressive Recruitment please visit the website. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
29/04/2024
Full time
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
ENGINEERING MANAGER Up to £75 per hour Plymouth - Hybrid (2-3 days in office) Discovering unparalleled innovation and expertise with a global leader in engineering and technology solutions, looking for an ENGINEERING MANAGER . You will experience top-tier services designed to elevate your projects and exceed expectations working with them. You will be involved in supporting the Design and Safety Manager with day-to-day engineering decisions. Report directly to the Design and Safety Manager and provide support to them, ensuring the delivery of engineering outcomes and the assurance of technical documentation. Skills Required: Managed up to at least 40 engineers. Knowledge of Design and Nuclear Safety. Mechanical/Electrical/Civil experience. Background in Engineering systems and design. Preferred - extensive knowledge of design codes. Join a trusted industry leader committed to driving progress and success on a global scale. Unlock new possibilities for your ventures with their esteemed team in Defence, Nuclear, Marine, and more. *PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role.
29/04/2024
Project-based
ENGINEERING MANAGER Up to £75 per hour Plymouth - Hybrid (2-3 days in office) Discovering unparalleled innovation and expertise with a global leader in engineering and technology solutions, looking for an ENGINEERING MANAGER . You will experience top-tier services designed to elevate your projects and exceed expectations working with them. You will be involved in supporting the Design and Safety Manager with day-to-day engineering decisions. Report directly to the Design and Safety Manager and provide support to them, ensuring the delivery of engineering outcomes and the assurance of technical documentation. Skills Required: Managed up to at least 40 engineers. Knowledge of Design and Nuclear Safety. Mechanical/Electrical/Civil experience. Background in Engineering systems and design. Preferred - extensive knowledge of design codes. Join a trusted industry leader committed to driving progress and success on a global scale. Unlock new possibilities for your ventures with their esteemed team in Defence, Nuclear, Marine, and more. *PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role.
Commercial Electrician - EV Installation Glasgow £40,000-£45,000 + Vehicle + Bonus + Excellent training and progression program + Great benefits Excellent role for a commercial Electrician looking to work for a rapidly growing, industry leading business within the EV sector, where a training and progression route is mapped out for you to become an EV expert and to move up into supervisory and management roles. Do you want a role where you will be well rewarded financially and in terms of progression? Do you want to work for a business where you can have input on your own progression and that of the business? The company is a leading ICP and EV ChargePoint installer serving commercial clients across all of the UK. They offer a full turnkey service comprising connections to the grid, civil engineering services, and full installation of electric vehicle chargers. To date they have completed just under 1,000 projects in just under 3 years of business, currently have over 200 projects ongoing and cover across the UK. They do work on behalf of all the house hold names in the industry and are fast becoming one themselves, as well as the go to company in the industry to give projects to. They are also branching out in to Solar and Battery storage. In this role you will be trained, learning the ins and outs of the industry. You will travel to different customer sites on commercial installation projects. This can be anything from motorway services, to leisure parks, hotels, airports and more. The company are looking for someone who is either experienced in the EV market or someone from a commercial electrical background looking to get into the industry and then kick on with their careers. The role: *Excellent training and progression *Become a supervisor/manager, and then a regional manager and beyond *£40,000-£45,000 + Vehicle + Bonus + Excellent training and progression program + Great benefits The person: *Must have an EV or commercial electrical background *Must be happy to travel to sites By applying to this advert you are giving CPS Group (UK) Ltd authority to hold and process your data for this specific role and any other roles we may deem suitable to you over time. We will not pass your data to any third party without your verbal or written permission to do so. All incoming and outgoing calls are recorded for training and compliance purposes. CPS Group (UK) Ltd is acting as an Employment Agency in relation to this vacancy. Our new privacy policy can be found on our website
29/04/2024
Full time
Commercial Electrician - EV Installation Glasgow £40,000-£45,000 + Vehicle + Bonus + Excellent training and progression program + Great benefits Excellent role for a commercial Electrician looking to work for a rapidly growing, industry leading business within the EV sector, where a training and progression route is mapped out for you to become an EV expert and to move up into supervisory and management roles. Do you want a role where you will be well rewarded financially and in terms of progression? Do you want to work for a business where you can have input on your own progression and that of the business? The company is a leading ICP and EV ChargePoint installer serving commercial clients across all of the UK. They offer a full turnkey service comprising connections to the grid, civil engineering services, and full installation of electric vehicle chargers. To date they have completed just under 1,000 projects in just under 3 years of business, currently have over 200 projects ongoing and cover across the UK. They do work on behalf of all the house hold names in the industry and are fast becoming one themselves, as well as the go to company in the industry to give projects to. They are also branching out in to Solar and Battery storage. In this role you will be trained, learning the ins and outs of the industry. You will travel to different customer sites on commercial installation projects. This can be anything from motorway services, to leisure parks, hotels, airports and more. The company are looking for someone who is either experienced in the EV market or someone from a commercial electrical background looking to get into the industry and then kick on with their careers. The role: *Excellent training and progression *Become a supervisor/manager, and then a regional manager and beyond *£40,000-£45,000 + Vehicle + Bonus + Excellent training and progression program + Great benefits The person: *Must have an EV or commercial electrical background *Must be happy to travel to sites By applying to this advert you are giving CPS Group (UK) Ltd authority to hold and process your data for this specific role and any other roles we may deem suitable to you over time. We will not pass your data to any third party without your verbal or written permission to do so. All incoming and outgoing calls are recorded for training and compliance purposes. CPS Group (UK) Ltd is acting as an Employment Agency in relation to this vacancy. Our new privacy policy can be found on our website
Introduction: Our client stands as an approved Maintenance Repair Organisation accredited by both EASA and UK CAA, entrusted with delivering Line & Base Maintenance services for a range of aircraft including the B737 NG, B737 Max, B777, and B787. As part of their ongoing growth, we are seeking B1 Licensed Aircraft Engineers to join our esteemed organisation. Candidates should hold a valid UK CAA Category B1 Part-66 Licence, with type ratings on B737 NG, B777, and/or B787 aircraft. Responsibilities: The B1 Licensed Aircraft Engineer will take charge of supervising Mechanics and overseeing inspection and certification of scheduled maintenance tasks, defect rectification, modifications, structural repairs, and functional tests across Airframe, Engine, and Electrical systems. They will collaborate closely with the Aircraft Check Manager to ensure the completion of daily workload tasks and adherence to the production plan. These positions will be under the guidance of the Maintenance Manager - Production and are stationed at our London Gatwick Hangar facility, offering various shift patterns for flexibility. Key Responsibilities: Supervising Mechanics performing Base Maintenance on customer aircraft. Inspecting and certifying scheduled maintenance tasks, defect rectification, modifications, structural repairs, and functional tests on Airframe, Engine, and Electrical systems. Completing all assigned work promptly to minimise aircraft downtime. Ensuring accurate completion of aircraft technical log books, maintenance documentation, job cards, work packages, and zonal handovers within designated timelines. Maintaining high standards of cleanliness and organisation within assigned work areas. Adhering to regulatory requirements, company processes, and procedures. Fostering a culture of safety and reporting all incidents and occurrences in the Boeing Safety Management System. Highlighting technical issues, discrepancies, or other concerns to the Aircraft Check Manager. Actively contributing to continuous improvement initiatives and lean principles. Assisting the management team in the day-to-day operations of the London Gatwick Operation. Undertaking additional duties as required, including potential work away from London Gatwick. Required Qualifications and Experience: Hold a valid UK CAA Category B1 Part-66 Licence. Type rating on one or more of the following aircraft - B737 NG, B777, or B787. Minimum of 1 year exercising certification privileges in a Line or Base Maintenance environment. Demonstrate 6 months recent experience on type and ability to maintain appropriate company authorisations specific to the role. Thorough understanding of Part-145 regulations. Previous experience using AMOS or other Maintenance Management Systems. Strong communication skills and effective problem-solving abilities. Flexibility to adjust working hours to meet operational demands. Team-oriented mindset with a commitment to exceeding internal and external customer expectations. Proficiency in using Microsoft Office applications and willingness to learn in-house systems. Eligibility to hold a London Gatwick Airport airside pass. Candidates must have the right to live and work in the United Kingdom. Work Authorisation: This position is open to locally hired candidates in the United Kingdom who possess current legal authorisation to work in the country. Sadly, our client will not pursue immigration or labour sponsorship for applicants.
26/04/2024
Project-based
Introduction: Our client stands as an approved Maintenance Repair Organisation accredited by both EASA and UK CAA, entrusted with delivering Line & Base Maintenance services for a range of aircraft including the B737 NG, B737 Max, B777, and B787. As part of their ongoing growth, we are seeking B1 Licensed Aircraft Engineers to join our esteemed organisation. Candidates should hold a valid UK CAA Category B1 Part-66 Licence, with type ratings on B737 NG, B777, and/or B787 aircraft. Responsibilities: The B1 Licensed Aircraft Engineer will take charge of supervising Mechanics and overseeing inspection and certification of scheduled maintenance tasks, defect rectification, modifications, structural repairs, and functional tests across Airframe, Engine, and Electrical systems. They will collaborate closely with the Aircraft Check Manager to ensure the completion of daily workload tasks and adherence to the production plan. These positions will be under the guidance of the Maintenance Manager - Production and are stationed at our London Gatwick Hangar facility, offering various shift patterns for flexibility. Key Responsibilities: Supervising Mechanics performing Base Maintenance on customer aircraft. Inspecting and certifying scheduled maintenance tasks, defect rectification, modifications, structural repairs, and functional tests on Airframe, Engine, and Electrical systems. Completing all assigned work promptly to minimise aircraft downtime. Ensuring accurate completion of aircraft technical log books, maintenance documentation, job cards, work packages, and zonal handovers within designated timelines. Maintaining high standards of cleanliness and organisation within assigned work areas. Adhering to regulatory requirements, company processes, and procedures. Fostering a culture of safety and reporting all incidents and occurrences in the Boeing Safety Management System. Highlighting technical issues, discrepancies, or other concerns to the Aircraft Check Manager. Actively contributing to continuous improvement initiatives and lean principles. Assisting the management team in the day-to-day operations of the London Gatwick Operation. Undertaking additional duties as required, including potential work away from London Gatwick. Required Qualifications and Experience: Hold a valid UK CAA Category B1 Part-66 Licence. Type rating on one or more of the following aircraft - B737 NG, B777, or B787. Minimum of 1 year exercising certification privileges in a Line or Base Maintenance environment. Demonstrate 6 months recent experience on type and ability to maintain appropriate company authorisations specific to the role. Thorough understanding of Part-145 regulations. Previous experience using AMOS or other Maintenance Management Systems. Strong communication skills and effective problem-solving abilities. Flexibility to adjust working hours to meet operational demands. Team-oriented mindset with a commitment to exceeding internal and external customer expectations. Proficiency in using Microsoft Office applications and willingness to learn in-house systems. Eligibility to hold a London Gatwick Airport airside pass. Candidates must have the right to live and work in the United Kingdom. Work Authorisation: This position is open to locally hired candidates in the United Kingdom who possess current legal authorisation to work in the country. Sadly, our client will not pursue immigration or labour sponsorship for applicants.