Senior Integration, Verification & Validation Engineer with extensive experience in design and development of Maritime Radar applications required for a Full time onsite contract in Abu Dhabi. Experience working to MilStd 810 and MilStd 461, is a plus. Responsibilities: - Work with senior system engineer to create system-level test procedures and scenarios for verifying new mode capabilities. - Test Environment enabling (test requirements assessment, budget, commission, set up) - Perform system integration, testing, data analysis, tactical simulations, updating of test procedures and generation of test reports. - Knowledgeable in Radar systems engineering and IV&V engineering principles. - Utilizes knowledge of RF systems and radar in general to verify the requirements allocated in DOORS or similar requirement tool. - Ability to follow test procedures and generate data for test reports. - Requirements management (DOORS) and interactions with multiple project contributors. - Conduct verification and validation via testing/analysis for environmental requirement such as temperature, vibration, EMC etc. - Planning and arrangement of engineering integration and testing. - Provide input to design process and support system testing activities. - Write/review environmental and functional requirement integration and verification plans. Experience & Skills - Knowledge of signal processing techniques and use of MATLAB (desirable). - Knowledgeable in Radar systems engineering and IV&V engineering principles - Specific knowledge of and experience working with Radar systems and/or subsystems: antenna, microwave, DSP, digital and electronics designs, environmental requirements, software. - Experience collaborating with other team leads and responsible for specific activities and progress on those activities will be monitored and tracked. - Proven Experience in test and design input for equipment with MilStd 810 and MilStd 461 requirements is a merit - Experience originating Systems Test plans and procedures for I&T, V&V, and unit/module procedures for Special Test Equipment. - Demonstrated experience working under structured IPDT process (Integrated Product Development Team). - Minimum 10 years experience in IV&V for the related products To arrange a Teams-based interview, please email in the first instance, your CV to (see below) WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
08/05/2024
Project-based
Senior Integration, Verification & Validation Engineer with extensive experience in design and development of Maritime Radar applications required for a Full time onsite contract in Abu Dhabi. Experience working to MilStd 810 and MilStd 461, is a plus. Responsibilities: - Work with senior system engineer to create system-level test procedures and scenarios for verifying new mode capabilities. - Test Environment enabling (test requirements assessment, budget, commission, set up) - Perform system integration, testing, data analysis, tactical simulations, updating of test procedures and generation of test reports. - Knowledgeable in Radar systems engineering and IV&V engineering principles. - Utilizes knowledge of RF systems and radar in general to verify the requirements allocated in DOORS or similar requirement tool. - Ability to follow test procedures and generate data for test reports. - Requirements management (DOORS) and interactions with multiple project contributors. - Conduct verification and validation via testing/analysis for environmental requirement such as temperature, vibration, EMC etc. - Planning and arrangement of engineering integration and testing. - Provide input to design process and support system testing activities. - Write/review environmental and functional requirement integration and verification plans. Experience & Skills - Knowledge of signal processing techniques and use of MATLAB (desirable). - Knowledgeable in Radar systems engineering and IV&V engineering principles - Specific knowledge of and experience working with Radar systems and/or subsystems: antenna, microwave, DSP, digital and electronics designs, environmental requirements, software. - Experience collaborating with other team leads and responsible for specific activities and progress on those activities will be monitored and tracked. - Proven Experience in test and design input for equipment with MilStd 810 and MilStd 461 requirements is a merit - Experience originating Systems Test plans and procedures for I&T, V&V, and unit/module procedures for Special Test Equipment. - Demonstrated experience working under structured IPDT process (Integrated Product Development Team). - Minimum 10 years experience in IV&V for the related products To arrange a Teams-based interview, please email in the first instance, your CV to (see below) WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
Electrical Design Specialist Permanent Theale/Hybrid The Electrical Specialist position is a key role within the Site Design Team, responsible for electrical design initiatives for our internal teams, construction partners and clientele. The specialist will create comprehensive electrical solutions that comply with current legislation and regulations that ensure build and operational effectiveness. A proactive approach is required to develop cost effective and energy efficient designs when working with suppliers, clients and internal or external teams, to establish robust guidelines, documentation, processes, and procedures. Responsibilities: Working within the multi-disciplined Design Team in the field of electrical engineering. Lead on the development of design standards and solutions that are in accordance with the appropriate regulations & legislation, and ensuring suppliers are aware and uphold these standards. Undertake site visits, investigate issues, audit electrical installations, test & inspection work completed by suppliers and build partners. Desktop reviews of site designs and test certification. Attend suppliers to develop relationships, product development and training. Be able to lead for incoming design queries related to electrical engineering, resolve with appropriate design guidance or to delegate to specialists within the design team. This includes queries in relation to deployment, sites out of service, operational and maintenance issues. Review, approve or reject electrical design concessions and provide responses to Electrical Design helpdesk queries. To Review, critic and provide feedback to suppliers on all matters related to electrical design, documentation, installation and test issues. Ensure all guidelines conform to current .GOV, HSE and BS/EN/IEC standards. Support and report on near misses/incident investigations for electrical and other cross party issues, create reports and trends. Drive a safety mindset through good design and working closely with our supply chain and clients to improve safety standards. What we are looking for? 5 years' experience in Electrical Design and Install of commercial & residential installations that are BS7671 compliant and certified. Experience of Test, Verification & Inspection to BS7671 on new and existing fixed installations. (EIC & EICR). Strong telecom or electrical trade experience Experience of building relationship with supply chain A firm understanding of electrical infrastructure, AC, DC, Earthing, LPS, SPD's, DC power supplies, DSO supplies. Good understanding of CDM legislation. Project People is acting as an Employment Agency in relation to this vacancy.
08/05/2024
Full time
Electrical Design Specialist Permanent Theale/Hybrid The Electrical Specialist position is a key role within the Site Design Team, responsible for electrical design initiatives for our internal teams, construction partners and clientele. The specialist will create comprehensive electrical solutions that comply with current legislation and regulations that ensure build and operational effectiveness. A proactive approach is required to develop cost effective and energy efficient designs when working with suppliers, clients and internal or external teams, to establish robust guidelines, documentation, processes, and procedures. Responsibilities: Working within the multi-disciplined Design Team in the field of electrical engineering. Lead on the development of design standards and solutions that are in accordance with the appropriate regulations & legislation, and ensuring suppliers are aware and uphold these standards. Undertake site visits, investigate issues, audit electrical installations, test & inspection work completed by suppliers and build partners. Desktop reviews of site designs and test certification. Attend suppliers to develop relationships, product development and training. Be able to lead for incoming design queries related to electrical engineering, resolve with appropriate design guidance or to delegate to specialists within the design team. This includes queries in relation to deployment, sites out of service, operational and maintenance issues. Review, approve or reject electrical design concessions and provide responses to Electrical Design helpdesk queries. To Review, critic and provide feedback to suppliers on all matters related to electrical design, documentation, installation and test issues. Ensure all guidelines conform to current .GOV, HSE and BS/EN/IEC standards. Support and report on near misses/incident investigations for electrical and other cross party issues, create reports and trends. Drive a safety mindset through good design and working closely with our supply chain and clients to improve safety standards. What we are looking for? 5 years' experience in Electrical Design and Install of commercial & residential installations that are BS7671 compliant and certified. Experience of Test, Verification & Inspection to BS7671 on new and existing fixed installations. (EIC & EICR). Strong telecom or electrical trade experience Experience of building relationship with supply chain A firm understanding of electrical infrastructure, AC, DC, Earthing, LPS, SPD's, DC power supplies, DSO supplies. Good understanding of CDM legislation. Project People is acting as an Employment Agency in relation to this vacancy.
Senior Spacecraft Systems Engineer - Security Clearance Eligible - Oxfordshire UK (Hybrid) Lynx is working with a leading space technology company is seeking an experienced and motivated Senior Spacecraft Systems Engineer to join their dynamic and rapidly growing team at their state-of-the-art facility in Oxfordshire UK. Responsibilities: Develop spacecraft mission and system design, including requirements derivation and CONOPS definition Perform mission analysis and modelling of spacecraft missions Trade-off and control platform systems budgets (mass, power, data, fuel) Produce mission-level test and verification plans, FMECA, FTA, and FDIR Perform rapid feasibility studies into different scenarios and architectures Assist with bid work, providing technical solutions and documentation Maintain configuration control of systems work and documentation Work with and guide a multi-disciplined team in the delivery of projects Requirements: Right to Work in UK and Eligible for a Security Clearance application (Mandatory) Diploma, bachelor's, or master's degree in systems engineering, electrical engineering, or another relevant discipline At least 10+ years of commercial experience in a Systems Engineering role for satellite platform architecture Knowledge of the systems and project engineering life cycle from requirements definition through to verification Experience in mission and systems architecture definition and CONOPS Good knowledge of various subsystems & engineering teams Experience in the development of systems engineering documentation Awareness of the AIT process: manufacture, assembly, functional and environmental testing Basic knowledge in areas such as debris removal, end-of-life, in-orbit maintenance or servicing Offer: Competitive base salary up to £85,000 Hybrid working available (Dependent on individual role requirements) Opportunity to work with a highly talented international team on cutting-edge technology Flexible working around core hours 25 days holiday (increasing yearly up to a maximum of 28 days) + 8 days Bank Holiday per year Life insurance and long-term sick pay Private healthcare (taxable benefit) Relocation allowance (within the UK) Regular social events If you are a senior engineer with hands-on experience working on spacecraft systems and can contribute to projects straight away, this is an excellent opportunity to join a pioneering company in the space industry. Apply now to shape the future of space sustainability!
07/05/2024
Full time
Senior Spacecraft Systems Engineer - Security Clearance Eligible - Oxfordshire UK (Hybrid) Lynx is working with a leading space technology company is seeking an experienced and motivated Senior Spacecraft Systems Engineer to join their dynamic and rapidly growing team at their state-of-the-art facility in Oxfordshire UK. Responsibilities: Develop spacecraft mission and system design, including requirements derivation and CONOPS definition Perform mission analysis and modelling of spacecraft missions Trade-off and control platform systems budgets (mass, power, data, fuel) Produce mission-level test and verification plans, FMECA, FTA, and FDIR Perform rapid feasibility studies into different scenarios and architectures Assist with bid work, providing technical solutions and documentation Maintain configuration control of systems work and documentation Work with and guide a multi-disciplined team in the delivery of projects Requirements: Right to Work in UK and Eligible for a Security Clearance application (Mandatory) Diploma, bachelor's, or master's degree in systems engineering, electrical engineering, or another relevant discipline At least 10+ years of commercial experience in a Systems Engineering role for satellite platform architecture Knowledge of the systems and project engineering life cycle from requirements definition through to verification Experience in mission and systems architecture definition and CONOPS Good knowledge of various subsystems & engineering teams Experience in the development of systems engineering documentation Awareness of the AIT process: manufacture, assembly, functional and environmental testing Basic knowledge in areas such as debris removal, end-of-life, in-orbit maintenance or servicing Offer: Competitive base salary up to £85,000 Hybrid working available (Dependent on individual role requirements) Opportunity to work with a highly talented international team on cutting-edge technology Flexible working around core hours 25 days holiday (increasing yearly up to a maximum of 28 days) + 8 days Bank Holiday per year Life insurance and long-term sick pay Private healthcare (taxable benefit) Relocation allowance (within the UK) Regular social events If you are a senior engineer with hands-on experience working on spacecraft systems and can contribute to projects straight away, this is an excellent opportunity to join a pioneering company in the space industry. Apply now to shape the future of space sustainability!
Senior Spacecraft Systems Engineer Spacecraft Systems Oxfordshire UK, Lynx is working with an innovative space technology company to recruit for a an experienced and motivated Senior Spacecraft Systems Engineer to join the dynamic and rapidly growing team at our state-of-the-art facility in Oxford, UK. Responsibilities: Develop spacecraft mission and system design, including requirements derivation and CONOPS definition Perform mission analysis and modelling of spacecraft missions Manage platform systems budgets (mass, power, data, fuel) Produce mission-level test, verification plans, FMECA, FTA, and FDIR Conduct rapid feasibility studies into different scenarios and architectures Assist with bid work, providing technical solutions and documentation Maintain configuration control of systems work and documentation Guide a multi-disciplined team in project delivery Requirements: Diploma, bachelor's, or master's degree in systems engineering, electrical engineering, or relevant discipline 10+ years of experience in Systems Engineering for satellite platform architecture Knowledge of systems and project engineering life cycle, including leading project review gates Experience in mission and systems architecture definition and CONOPS Good knowledge of subsystems & engineering teams (GNC, astrodynamics, C&DH, EPS, RCS, COM, software, ground segment & operations) Experience developing systems engineering documentation Awareness of the AIT process (manufacture, assembly, functional and environmental testing) Basic knowledge of debris removal, end-of-life, in-orbit maintenance or servicing Offer: Competitive salary up to £85,000 Flexible and hybrid working options 25 days holiday (increasing to 28 days) + 8 bank holidays per year Life insurance, long term sick pay, and private healthcare Relocation allowance and visa sponsorship Regular social events If you are a senior engineer with hands-on experience working on spacecraft systems and can contribute to projects immediately, we'd love to hear from you. Apply today and join in shaping solutions for a sustainable future in space!
07/05/2024
Full time
Senior Spacecraft Systems Engineer Spacecraft Systems Oxfordshire UK, Lynx is working with an innovative space technology company to recruit for a an experienced and motivated Senior Spacecraft Systems Engineer to join the dynamic and rapidly growing team at our state-of-the-art facility in Oxford, UK. Responsibilities: Develop spacecraft mission and system design, including requirements derivation and CONOPS definition Perform mission analysis and modelling of spacecraft missions Manage platform systems budgets (mass, power, data, fuel) Produce mission-level test, verification plans, FMECA, FTA, and FDIR Conduct rapid feasibility studies into different scenarios and architectures Assist with bid work, providing technical solutions and documentation Maintain configuration control of systems work and documentation Guide a multi-disciplined team in project delivery Requirements: Diploma, bachelor's, or master's degree in systems engineering, electrical engineering, or relevant discipline 10+ years of experience in Systems Engineering for satellite platform architecture Knowledge of systems and project engineering life cycle, including leading project review gates Experience in mission and systems architecture definition and CONOPS Good knowledge of subsystems & engineering teams (GNC, astrodynamics, C&DH, EPS, RCS, COM, software, ground segment & operations) Experience developing systems engineering documentation Awareness of the AIT process (manufacture, assembly, functional and environmental testing) Basic knowledge of debris removal, end-of-life, in-orbit maintenance or servicing Offer: Competitive salary up to £85,000 Flexible and hybrid working options 25 days holiday (increasing to 28 days) + 8 bank holidays per year Life insurance, long term sick pay, and private healthcare Relocation allowance and visa sponsorship Regular social events If you are a senior engineer with hands-on experience working on spacecraft systems and can contribute to projects immediately, we'd love to hear from you. Apply today and join in shaping solutions for a sustainable future in space!
Senior Hardware Design Engineer - Exciting Opportunity with Leading Tech Company Lynx is working with a renowned tech company to recruit a Senior Hardware Design Engineer. In this role you'll play a pivotal role in new product introduction as well as sustaining engineering for ground-breaking products. This is a hybrid role and also offers a bonus of 3-6%. Key Responsibilities: Design electronic circuits, subsystems, and systems covering analog, digital, and RF Schematic capture, layout, and library management Evaluate new systems and technologies for feasibility and product design Technical support for production, manufacturing, and troubleshooting Design verification, testing, and documentation Requirements: 4+ years of relevant hardware design experience Strong expertise in digital circuit design (microprocessors, FPGAs, high-speed peripherals) Solid skills in analog circuit design (power supplies, etc.) Familiarity with PCB layout, EMC/CE marking, and design for IPC Hands-on experience in PCB testing Desired: Proficiency with industry-standard design tools - Altium preferred Understanding of military/airborne design standards (MIL-STD, DO-160, etc.) Practical testing skills with scopes, analysers, JTAG boundary scan, etc. Hit apply to find out more information.
07/05/2024
Full time
Senior Hardware Design Engineer - Exciting Opportunity with Leading Tech Company Lynx is working with a renowned tech company to recruit a Senior Hardware Design Engineer. In this role you'll play a pivotal role in new product introduction as well as sustaining engineering for ground-breaking products. This is a hybrid role and also offers a bonus of 3-6%. Key Responsibilities: Design electronic circuits, subsystems, and systems covering analog, digital, and RF Schematic capture, layout, and library management Evaluate new systems and technologies for feasibility and product design Technical support for production, manufacturing, and troubleshooting Design verification, testing, and documentation Requirements: 4+ years of relevant hardware design experience Strong expertise in digital circuit design (microprocessors, FPGAs, high-speed peripherals) Solid skills in analog circuit design (power supplies, etc.) Familiarity with PCB layout, EMC/CE marking, and design for IPC Hands-on experience in PCB testing Desired: Proficiency with industry-standard design tools - Altium preferred Understanding of military/airborne design standards (MIL-STD, DO-160, etc.) Practical testing skills with scopes, analysers, JTAG boundary scan, etc. Hit apply to find out more information.
We are currently looking on behalf of one of our important clients for a Head of Laboratory Test Development & Validation (German Speaking). The role is a permanent position based in Bern Canton & comes with good home office allowance. Your Role: Oversee the personnel & technical management of a specialist group of 4 Engineers & 3 Laboratory Technicians. Develop & validate new physical measurement & testing methods. Provide technical support for Design Verification Laboratories. Hold responsibility for the operation & maintenance of a Development Laboratory. Plan, coordinate & execute measurement & testing orders in relation to Product Innovation & Product Development. Place, award & support contracts to external service providers if required. Your Skills: At least 5 years of relevant professional experience including experience within Development Laboratories. Skilled & experienced in Leading teams. Ideally experienced in Design Verification & the Medical Technology sector. Your Profile: Completed relevant Scientific or Technical University Degree. Communicative, strong leadership skills & solution-oriented. Fluent English & good German language skills (to at least B2 Level) are a mandatory requirement.
06/05/2024
Full time
We are currently looking on behalf of one of our important clients for a Head of Laboratory Test Development & Validation (German Speaking). The role is a permanent position based in Bern Canton & comes with good home office allowance. Your Role: Oversee the personnel & technical management of a specialist group of 4 Engineers & 3 Laboratory Technicians. Develop & validate new physical measurement & testing methods. Provide technical support for Design Verification Laboratories. Hold responsibility for the operation & maintenance of a Development Laboratory. Plan, coordinate & execute measurement & testing orders in relation to Product Innovation & Product Development. Place, award & support contracts to external service providers if required. Your Skills: At least 5 years of relevant professional experience including experience within Development Laboratories. Skilled & experienced in Leading teams. Ideally experienced in Design Verification & the Medical Technology sector. Your Profile: Completed relevant Scientific or Technical University Degree. Communicative, strong leadership skills & solution-oriented. Fluent English & good German language skills (to at least B2 Level) are a mandatory requirement.
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
06/05/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
Position Available : RF Systems Engineer Location : Bristol - Dynamic Working Hours Salary : Up to £63,000 + Paid Overtime, Company Bonus & Very Good Pension Package Experience needed : Experience in RF, DSP, Antenna & Modelling and experience being involved with the full product life cycle from research and concept development to system design, integration, verification and validation. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Supplier Development Manager to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Designing and developing RF systems Participating in, or leading design reviews across the product life cycle. Coordinating the transition of development hardware into production, including environmental testing, qualification testing and design certification. System level functionality proving, Software/Firmware integration and proving. What we need from you: RF/Microwave systems knowledge Understanding of waveform design and implementation Requirements management and systems design Technical leadership of junior engineers System level RF modelling Antenna design and/or EM modelling Familiarity of Real Time Digital Signal Processing for high data bandwidth systems Systems modelling and Autocode generation experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
03/05/2024
Full time
Position Available : RF Systems Engineer Location : Bristol - Dynamic Working Hours Salary : Up to £63,000 + Paid Overtime, Company Bonus & Very Good Pension Package Experience needed : Experience in RF, DSP, Antenna & Modelling and experience being involved with the full product life cycle from research and concept development to system design, integration, verification and validation. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Supplier Development Manager to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Designing and developing RF systems Participating in, or leading design reviews across the product life cycle. Coordinating the transition of development hardware into production, including environmental testing, qualification testing and design certification. System level functionality proving, Software/Firmware integration and proving. What we need from you: RF/Microwave systems knowledge Understanding of waveform design and implementation Requirements management and systems design Technical leadership of junior engineers System level RF modelling Antenna design and/or EM modelling Familiarity of Real Time Digital Signal Processing for high data bandwidth systems Systems modelling and Autocode generation experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
NO SPONSORSHIP Company is located in Chicago - Can be hybrid or remote if needed Contract to Hire role Data Quality Test Engineer This can be a straight contract role or a contract to hire role. The Test Engineer will be responsible for ensuring the successful implementation of new features as well as improvement of existing functionality for data architecture projects. This includes Integration testing, Customer Data Quality testing, Data verification testing, Regression testing etc. This is a hands-on testing position which requires deep knowledge and understanding of all aspects of developing and executing Back End testing. The Test Engineer must be an advocate for all things Testing and Quality Assurance while driving and implementing best practices. The ideal candidate must possess strong analytical and critical thinking abilities. Data testing skills are required. Position Requirements Bachelor's degree At least 3-5 years of testing experience in data Strong experience with writing queries in relational databases like Oracle and SQL server. Familiar with SQL server queries including calling stored procedures by passing parameters, functions, views, and indexes to be used during ETL process. Possess extensive and in-depth knowledge of developing SQL scripts using SQL functions, grouping operations, sub queries, analytical function and joins to test ETL projects. ETL testing using SQL server Integration Services (SSIS) and SSRS. Experience in testing database applications to validate source to destination data movement and transformation. Knowledge of automated data testing is preferred. Hands-on experience in Planning and Manual test execution. Experience in Regression Test Strategies, Regression suite maintenance and execution. Hands-on experience with Jira, ALM, TFS/ADO or similar systems of record. Understanding of Development and Test cycles, including respective best practices. Hands-on experience in Agile and Waterfall methodologies. Ability to troubleshoot issues, identifying root causes and support development team in development of resolutions. Strong communication and Client/Business interfacing and interpersonal skills are a must.
02/05/2024
NO SPONSORSHIP Company is located in Chicago - Can be hybrid or remote if needed Contract to Hire role Data Quality Test Engineer This can be a straight contract role or a contract to hire role. The Test Engineer will be responsible for ensuring the successful implementation of new features as well as improvement of existing functionality for data architecture projects. This includes Integration testing, Customer Data Quality testing, Data verification testing, Regression testing etc. This is a hands-on testing position which requires deep knowledge and understanding of all aspects of developing and executing Back End testing. The Test Engineer must be an advocate for all things Testing and Quality Assurance while driving and implementing best practices. The ideal candidate must possess strong analytical and critical thinking abilities. Data testing skills are required. Position Requirements Bachelor's degree At least 3-5 years of testing experience in data Strong experience with writing queries in relational databases like Oracle and SQL server. Familiar with SQL server queries including calling stored procedures by passing parameters, functions, views, and indexes to be used during ETL process. Possess extensive and in-depth knowledge of developing SQL scripts using SQL functions, grouping operations, sub queries, analytical function and joins to test ETL projects. ETL testing using SQL server Integration Services (SSIS) and SSRS. Experience in testing database applications to validate source to destination data movement and transformation. Knowledge of automated data testing is preferred. Hands-on experience in Planning and Manual test execution. Experience in Regression Test Strategies, Regression suite maintenance and execution. Hands-on experience with Jira, ALM, TFS/ADO or similar systems of record. Understanding of Development and Test cycles, including respective best practices. Hands-on experience in Agile and Waterfall methodologies. Ability to troubleshoot issues, identifying root causes and support development team in development of resolutions. Strong communication and Client/Business interfacing and interpersonal skills are a must.
Senior Hardware Design Engineer - Exciting Opportunity with Leading Tech Company Lynx is working with a renowned tech company to recruit a Senior Hardware Design Engineer. In this role you'll play a pivotal role in new product introduction as well as sustaining engineering for ground-breaking products. This is a hybrid role and also offers a bonus of 3-6%. Key Responsibilities: Design electronic circuits, subsystems, and systems covering analog, digital, and RF Schematic capture, layout, and library management Evaluate new systems and technologies for feasibility and product design Technical support for production, manufacturing, and troubleshooting Design verification, testing, and documentation Requirements: 4+ years of relevant hardware design experience Strong expertise in digital circuit design (microprocessors, FPGAs, high-speed peripherals) Solid skills in analog circuit design (power supplies, etc.) Familiarity with PCB layout, EMC/CE marking, and design for IPC Hands-on experience in PCB testing Desired: Proficiency with industry-standard design tools - Altium preferred Understanding of military/airborne design standards (MIL-STD, DO-160, etc.) Practical testing skills with scopes, analysers, JTAG boundary scan, etc. Hit apply to find out more information.
02/05/2024
Full time
Senior Hardware Design Engineer - Exciting Opportunity with Leading Tech Company Lynx is working with a renowned tech company to recruit a Senior Hardware Design Engineer. In this role you'll play a pivotal role in new product introduction as well as sustaining engineering for ground-breaking products. This is a hybrid role and also offers a bonus of 3-6%. Key Responsibilities: Design electronic circuits, subsystems, and systems covering analog, digital, and RF Schematic capture, layout, and library management Evaluate new systems and technologies for feasibility and product design Technical support for production, manufacturing, and troubleshooting Design verification, testing, and documentation Requirements: 4+ years of relevant hardware design experience Strong expertise in digital circuit design (microprocessors, FPGAs, high-speed peripherals) Solid skills in analog circuit design (power supplies, etc.) Familiarity with PCB layout, EMC/CE marking, and design for IPC Hands-on experience in PCB testing Desired: Proficiency with industry-standard design tools - Altium preferred Understanding of military/airborne design standards (MIL-STD, DO-160, etc.) Practical testing skills with scopes, analysers, JTAG boundary scan, etc. Hit apply to find out more information.
Position: FPGA Designer Are you passionate about cutting-edge technology and innovation? Do you thrive in a dynamic environment where creativity meets engineering excellence? If so, we have an exciting opportunity for you! Location: Hertfordshire About Us: Our team is dedicated to pushing the boundaries of technology to create solutions that make a difference in the world. As we continue to grow, we are seeking talented FPGA Designers to join our team and contribute to our mission of innovation and excellence. Responsibilities: Design and develop FPGA architectures and implementations for advanced signal processing systems, core Embedded processing systems, and safety-critical applications. Collaborate with multidisciplinary teams to define requirements, develop solutions, and integrate FPGA designs into larger systems. Utilize cutting-edge tools and technologies to optimize FPGA performance and functionality. Perform verification and validation testing to ensure the reliability and accuracy of FPGA designs. Provide support and guidance throughout the development life cycle, from concept to production. Requirements: Bachelor's degree in Electrical Engineering, Computer Engineering, or related field. Demonstrated experience in FPGA design, including VHDL or Verilog development. Excellent problem-solving skills and attention to detail. Effective communication and teamwork abilities. Benefits: £60,000 - £80,000 Salary and comprehensive benefits package Opportunity to work on cutting-edge projects with leading-edge technology. Professional development and growth opportunities. Collaborative and supportive work environment. Flexible work arrangements and work-life balance initiatives. Join Us: If you are ready to take your FPGA design career to the next level and make a meaningful impact, we want to hear from you! Apply now to join our dynamic team and help shape the future. Please apply if you're interested or even curious about these opportunities!
02/05/2024
Full time
Position: FPGA Designer Are you passionate about cutting-edge technology and innovation? Do you thrive in a dynamic environment where creativity meets engineering excellence? If so, we have an exciting opportunity for you! Location: Hertfordshire About Us: Our team is dedicated to pushing the boundaries of technology to create solutions that make a difference in the world. As we continue to grow, we are seeking talented FPGA Designers to join our team and contribute to our mission of innovation and excellence. Responsibilities: Design and develop FPGA architectures and implementations for advanced signal processing systems, core Embedded processing systems, and safety-critical applications. Collaborate with multidisciplinary teams to define requirements, develop solutions, and integrate FPGA designs into larger systems. Utilize cutting-edge tools and technologies to optimize FPGA performance and functionality. Perform verification and validation testing to ensure the reliability and accuracy of FPGA designs. Provide support and guidance throughout the development life cycle, from concept to production. Requirements: Bachelor's degree in Electrical Engineering, Computer Engineering, or related field. Demonstrated experience in FPGA design, including VHDL or Verilog development. Excellent problem-solving skills and attention to detail. Effective communication and teamwork abilities. Benefits: £60,000 - £80,000 Salary and comprehensive benefits package Opportunity to work on cutting-edge projects with leading-edge technology. Professional development and growth opportunities. Collaborative and supportive work environment. Flexible work arrangements and work-life balance initiatives. Join Us: If you are ready to take your FPGA design career to the next level and make a meaningful impact, we want to hear from you! Apply now to join our dynamic team and help shape the future. Please apply if you're interested or even curious about these opportunities!