JOB: Working across an Assets and Connections Portfolio, the successful candidate will be responsible for producing and assuring high quality electrical and circuit designs to an agreed scope. Designs to be delivered to cost, time and quality targets. All designs must meet design and CDM standards. These designs could be for APP and/or Connections (non-contestable and contestable) work. The successful candidate will be expected to work as part of a multi-disciplinary team, delivering design technical excellence by ensuring compliance to design, CDM and relevant standards for the regulated network solutions for all APP and Connection schemes. ACCOUNTABILITIES: Production of Electrical Designs and circuit designs (below ground and in air) that can be constructed in compliance with standards and CDM requirements with no supervision and assure others designs. Deliver effective designs, which conform to all relevant Codes of Practice and company and industry standards, in conjunction with Electrical Design. Contribute to the production of technical, commercial and contractual documents for procurement of engineering products. Ensure compliance with all relevant legislation, regulations, and company procedures. Compliance with design assurance and audit processes Preparation of concept and developed design, from specifications and drawings within defined periods. Provide an excellent service to the customer. Work as a Team Player within larger multi-disciplinary teams. Liaise with the operational teams to ensure a smooth process from initial enquiry through to final energisation and project closure. Complying with the requirements of the designer/principal designer as determined by the 2015 CDM Regulations. Ensure design eliminates any hazards which may give rise to risks; and reduce risks from any remaining hazards (in conjunction with CDM). Ensure solutions provide sufficient information about aspects of the design of the network, its construction and maintenance as will adequately assist clients, the CDM team, other designers, and contractors. Supporting and mentoring other members of the team to enhance their technical knowledge and experience. SKILLS, QUALIFICATIONS AND EXPERIENCE: Strong Electrical engineering background and experience in electrical engineering. Knowledge of power system and protection design at 132KV, 33KV, 11KV, and intermediate voltages. Electrical/Circuit Engineering degree or STEM equivalent with proven relevant Electrical/Cable/OHL and substation design experience. Circuit engineering background and extensive experience in EHV circuit design and construction works, ideally within Utility sector. Competence in resolving circuit network issues and ability to provide a sound understanding of company standards and policies and their application to this role. Awareness of current and technological developments in circuit engineering. Extensive Knowledge of design processes and relevant DNO, ENA and International Design Standards including relevant operational aspects to successfully deliver designs. Ability to work with external engineering organisations and customers/stakeholders representing UKPN to best effect. Capable to sign off the designs. A good safety culture and sound understanding of Construction Design and Management (CDM) Regulations and their application in this role. Ability to work unsupervised, set and comply with own targets, and identify and implement innovative cost saving solutions. Good team working skills. A good level of business, environmental, safety, financial, and regulatory awareness. A general appreciation of financial reporting systems. Knowledge of the ISO 9001:2000 and ISO 14001 procedures relevant to the team's activities. Manage (not line manage) and communicate with the CAD team to produce design drawings suitable for construction. Experience of undertaking cable sizing/rating calculations for 11kV up to 132kV networks, for both solidly and cross bonded circuits (including de-rating aspects and short circuit loadings). Experience of undertaking cable pulling calculations for 11kV up to 132kV networks, in line with company standards. Experience in designing joint/pulling bays from 11kV up to 132kV. Experience in designing pilot/fibre cable routes, including splice chambers. Experience in terminations to indoor/outdoor switchgear/cable sealing ends. Experience in route proving, to determine the most cost effective and safest route install. Experience of directional drills and ability to advise/assure requirements accordingly. Excellent communication and organizational skills required, especially in relation to dealing with survey companies to obtain utility search information. Experience with producing Bills of Materials, particularly cable drum lengths, in coordination with pulling calculations. Liaise with Wayleaves and Consents to determine most feasible route. Knowledge of project management. Proficient in the use of Microsoft desktop applications, in particular: Word, Excel, and PowerPoint. Strong interpersonal skills and be competent in written and oral communications. Proficient in the use of AutoCAD and or Micro station. Awareness of current and technological developments in distribution plant and equipment. Input into innovative construction ideas and techniques, which feed into UK Power Networks Green Action Plan. Chartered Engineer or working towards achieving Chartership. PACKAGE: £70,000 - £78,132 - + car + London Allowance + bonus + benefit Annual Leave Personal Pension Plan - Personal contribution rates of 4% or 5% (UK Power Networks will make a corresponding contribution of 8% or 10%) Tenancy Loan Deposit scheme Tax efficient benefits: cycle to work scheme Season ticket loan Occupational Health support Switched On - scheme providing discount on hundreds of retailers products. Discounted access to sports and social clubs Employee Assistance Programme
03/05/2024
Full time
JOB: Working across an Assets and Connections Portfolio, the successful candidate will be responsible for producing and assuring high quality electrical and circuit designs to an agreed scope. Designs to be delivered to cost, time and quality targets. All designs must meet design and CDM standards. These designs could be for APP and/or Connections (non-contestable and contestable) work. The successful candidate will be expected to work as part of a multi-disciplinary team, delivering design technical excellence by ensuring compliance to design, CDM and relevant standards for the regulated network solutions for all APP and Connection schemes. ACCOUNTABILITIES: Production of Electrical Designs and circuit designs (below ground and in air) that can be constructed in compliance with standards and CDM requirements with no supervision and assure others designs. Deliver effective designs, which conform to all relevant Codes of Practice and company and industry standards, in conjunction with Electrical Design. Contribute to the production of technical, commercial and contractual documents for procurement of engineering products. Ensure compliance with all relevant legislation, regulations, and company procedures. Compliance with design assurance and audit processes Preparation of concept and developed design, from specifications and drawings within defined periods. Provide an excellent service to the customer. Work as a Team Player within larger multi-disciplinary teams. Liaise with the operational teams to ensure a smooth process from initial enquiry through to final energisation and project closure. Complying with the requirements of the designer/principal designer as determined by the 2015 CDM Regulations. Ensure design eliminates any hazards which may give rise to risks; and reduce risks from any remaining hazards (in conjunction with CDM). Ensure solutions provide sufficient information about aspects of the design of the network, its construction and maintenance as will adequately assist clients, the CDM team, other designers, and contractors. Supporting and mentoring other members of the team to enhance their technical knowledge and experience. SKILLS, QUALIFICATIONS AND EXPERIENCE: Strong Electrical engineering background and experience in electrical engineering. Knowledge of power system and protection design at 132KV, 33KV, 11KV, and intermediate voltages. Electrical/Circuit Engineering degree or STEM equivalent with proven relevant Electrical/Cable/OHL and substation design experience. Circuit engineering background and extensive experience in EHV circuit design and construction works, ideally within Utility sector. Competence in resolving circuit network issues and ability to provide a sound understanding of company standards and policies and their application to this role. Awareness of current and technological developments in circuit engineering. Extensive Knowledge of design processes and relevant DNO, ENA and International Design Standards including relevant operational aspects to successfully deliver designs. Ability to work with external engineering organisations and customers/stakeholders representing UKPN to best effect. Capable to sign off the designs. A good safety culture and sound understanding of Construction Design and Management (CDM) Regulations and their application in this role. Ability to work unsupervised, set and comply with own targets, and identify and implement innovative cost saving solutions. Good team working skills. A good level of business, environmental, safety, financial, and regulatory awareness. A general appreciation of financial reporting systems. Knowledge of the ISO 9001:2000 and ISO 14001 procedures relevant to the team's activities. Manage (not line manage) and communicate with the CAD team to produce design drawings suitable for construction. Experience of undertaking cable sizing/rating calculations for 11kV up to 132kV networks, for both solidly and cross bonded circuits (including de-rating aspects and short circuit loadings). Experience of undertaking cable pulling calculations for 11kV up to 132kV networks, in line with company standards. Experience in designing joint/pulling bays from 11kV up to 132kV. Experience in designing pilot/fibre cable routes, including splice chambers. Experience in terminations to indoor/outdoor switchgear/cable sealing ends. Experience in route proving, to determine the most cost effective and safest route install. Experience of directional drills and ability to advise/assure requirements accordingly. Excellent communication and organizational skills required, especially in relation to dealing with survey companies to obtain utility search information. Experience with producing Bills of Materials, particularly cable drum lengths, in coordination with pulling calculations. Liaise with Wayleaves and Consents to determine most feasible route. Knowledge of project management. Proficient in the use of Microsoft desktop applications, in particular: Word, Excel, and PowerPoint. Strong interpersonal skills and be competent in written and oral communications. Proficient in the use of AutoCAD and or Micro station. Awareness of current and technological developments in distribution plant and equipment. Input into innovative construction ideas and techniques, which feed into UK Power Networks Green Action Plan. Chartered Engineer or working towards achieving Chartership. PACKAGE: £70,000 - £78,132 - + car + London Allowance + bonus + benefit Annual Leave Personal Pension Plan - Personal contribution rates of 4% or 5% (UK Power Networks will make a corresponding contribution of 8% or 10%) Tenancy Loan Deposit scheme Tax efficient benefits: cycle to work scheme Season ticket loan Occupational Health support Switched On - scheme providing discount on hundreds of retailers products. Discounted access to sports and social clubs Employee Assistance Programme
People Source Consulting Ltd
Warwick, Warwickshire
Role: Mechanical Engineer Location: Warwick + Hybrid working Salary: £40,000 - £60,000 (depending on experience and ability) The Role Power electronics requires collaborative working between electronics engineering and mechanical engineering to ensure thermal management, production feasibility, durability, and service life. As a Mechanical Engineer, reporting to the Mechanical Engineering Team Leader, you will take responsibility for the technical delivery of one or more projects and ensure that the tasks assigned to you are completed in a timely and conscientious fashion. Continued close communication with the relevant project leads is required. You will produce SolidWorks CAD models and associated drawings of complex cooling structures with an eye to manufacturability and cost effectiveness at all times. To assess the effectiveness of these designs you will be required to conduct mechanical and thermal analysis. You will have the opportunity to integrate your own methods and ideas in order to deliver the company's technical innovations. Responsibilities Simulate, Model, and Validate Cooling Structures: Conduct detailed simulations and modelling to design cooling structures that efficiently extract heat from power electronics devices. Validate these designs through rigorous testing, considering both liquid and air cooling methods SolidWorks CAD Design and Prototyping: Utilize SolidWorks to create innovative and efficient CAD designs. Develop associated drawings and guide designs from prototype build to volume manufacturing Sealing System Design and Testing: Design and rigorously test sealing systems for optimal environmental performance on housing component Advanced Manufacturing Processes: Spearhead the development of industry-leading manufacturing processes for machined, sheet metal, and polymer parts Mechanical-Electronics Integration: Specify mechanical connections and interfaces for seamless integration with electronic components. Collaborate with electronics engineers to optimize package size and functionality PCB Component Layout and Durability: Support PCB component layout design, ensuring durability under static, dynamic, and thermal loading conditions Comprehensive Documentation: Produce thorough product documentation, including design notes, bills of materials, and user manuals Quality and Safety Adherence: Apply rigorous quality and safety standards throughout project execution. In house prototyping we build and test our products in house. Mechanical dexterity and ability is required. Customer-Centric Approach: Interpret product requirements from customer specifications and ensure strict adherence. Effectively communicate design concepts to multiple stakeholders, including direct interaction with customers Company Values and Self-Driven Problem Solving: Adhere to company policies and procedures related to testing, quality, and documentation release. Demonstrate a proactive and self-motivated approach to solving engineering challenges. Benefits: You will enjoy working as part of a close-knit team where every individual's contribution matters and where you will have the freedom to interact directly with every member of the business. Hybrid Working Unlimited Leave 5% towards each staff members pension scheme contribution Group Life Insurance (4 times basic annual salary) Employee Assistance Programme Minimum educational qualifications: Degree level education in Mechanical Engineering or related subject. Applicants with equivalent alternative qualifications or experience will be considered. Previous Experience: You will have a minimum of 2 years working within a field of mechanical design or simulation. Other advantageous skills: Knowledge of the use of simulation software - both CFD and FEA. Interest in 3D printing technologies. Good mechanical ability, eg experience of machine shops, product assembly Experience of SolidWorks CAD software Working understanding of electronics Familiarity with high voltage (eg electric vehicle) working Design for manufacture and assembly How to apply? Please send a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
02/05/2024
Full time
Role: Mechanical Engineer Location: Warwick + Hybrid working Salary: £40,000 - £60,000 (depending on experience and ability) The Role Power electronics requires collaborative working between electronics engineering and mechanical engineering to ensure thermal management, production feasibility, durability, and service life. As a Mechanical Engineer, reporting to the Mechanical Engineering Team Leader, you will take responsibility for the technical delivery of one or more projects and ensure that the tasks assigned to you are completed in a timely and conscientious fashion. Continued close communication with the relevant project leads is required. You will produce SolidWorks CAD models and associated drawings of complex cooling structures with an eye to manufacturability and cost effectiveness at all times. To assess the effectiveness of these designs you will be required to conduct mechanical and thermal analysis. You will have the opportunity to integrate your own methods and ideas in order to deliver the company's technical innovations. Responsibilities Simulate, Model, and Validate Cooling Structures: Conduct detailed simulations and modelling to design cooling structures that efficiently extract heat from power electronics devices. Validate these designs through rigorous testing, considering both liquid and air cooling methods SolidWorks CAD Design and Prototyping: Utilize SolidWorks to create innovative and efficient CAD designs. Develop associated drawings and guide designs from prototype build to volume manufacturing Sealing System Design and Testing: Design and rigorously test sealing systems for optimal environmental performance on housing component Advanced Manufacturing Processes: Spearhead the development of industry-leading manufacturing processes for machined, sheet metal, and polymer parts Mechanical-Electronics Integration: Specify mechanical connections and interfaces for seamless integration with electronic components. Collaborate with electronics engineers to optimize package size and functionality PCB Component Layout and Durability: Support PCB component layout design, ensuring durability under static, dynamic, and thermal loading conditions Comprehensive Documentation: Produce thorough product documentation, including design notes, bills of materials, and user manuals Quality and Safety Adherence: Apply rigorous quality and safety standards throughout project execution. In house prototyping we build and test our products in house. Mechanical dexterity and ability is required. Customer-Centric Approach: Interpret product requirements from customer specifications and ensure strict adherence. Effectively communicate design concepts to multiple stakeholders, including direct interaction with customers Company Values and Self-Driven Problem Solving: Adhere to company policies and procedures related to testing, quality, and documentation release. Demonstrate a proactive and self-motivated approach to solving engineering challenges. Benefits: You will enjoy working as part of a close-knit team where every individual's contribution matters and where you will have the freedom to interact directly with every member of the business. Hybrid Working Unlimited Leave 5% towards each staff members pension scheme contribution Group Life Insurance (4 times basic annual salary) Employee Assistance Programme Minimum educational qualifications: Degree level education in Mechanical Engineering or related subject. Applicants with equivalent alternative qualifications or experience will be considered. Previous Experience: You will have a minimum of 2 years working within a field of mechanical design or simulation. Other advantageous skills: Knowledge of the use of simulation software - both CFD and FEA. Interest in 3D printing technologies. Good mechanical ability, eg experience of machine shops, product assembly Experience of SolidWorks CAD software Working understanding of electronics Familiarity with high voltage (eg electric vehicle) working Design for manufacture and assembly How to apply? Please send a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
Lead Electrical Engineer - Inside IR35 - €750 per day! We are recruiting an Electrical Engineer for a project in County Clare, Ireland, which is expected to run until the end of February 2026. Our client is in the process of transitioning a power station's primary fuel from coal to heavy fuel oil. The works require the construction of two new heavy fuel oil tanks, new auxiliary boilers, new ash injection system, upgrade of the existing HFO Systems, ancillary systems and modifications to the existing site infrastructure. As an Electrical Engineer you will be tasked to manage the key responsibilities which are listed below: - Perform role of lead electrical engineer and be responsible for the electrical engineering works on site for the successful delivery of the emergency generation projects. Manage Site teams (as required), and liaison with Station Electrical and Instrumentation (E&I) teams. Liaise with Control & Instrumentation, Mechanical and Civil design teams to ensure delivery co-ordination on multi-disciplinary projects. Ensure that electrical systems are installed, tested, and operated safely and efficiently in accordance with regulations, standards, and guidelines. Co-ordinate electrical testing and commissioning activities on Low Voltage (LV), Medium Voltage (MV) and High Voltage (HV) systems and provide advice on testing and commissioning procedures and documentation. Support the management of projects from installation, commissioning, and handover. Support the team of electrical engineers delivering engineering design and support services for generating technologies. Support for the Safety Systems at site and apply a high level of safety standards in every aspect of the work. Skills and Experience Proven track record of significant experience in the power generation industry. A minimum of 7 years' relevant experience is required. Design, and Construction or Commissioning experience, is preferred. Extensive knowledge of electrical equipment utilised in power plant projects, preferably including LV and MV Proven ability to deliver on the key responsibilities outlined above. A proven track record in delivering complex engineering projects and ability to manage multiple projects. Experience of Project Management tools would be an advantage. Working knowledge of Health, Safety and Environment Standards, and Electrical Safety procedures An EU/British passport will be required for this role, as the role requires onsite working Monday to Friday. The daily rate on offer is €750 all-inclusive (no expenses). Further information is available upon request.
30/04/2024
Project-based
Lead Electrical Engineer - Inside IR35 - €750 per day! We are recruiting an Electrical Engineer for a project in County Clare, Ireland, which is expected to run until the end of February 2026. Our client is in the process of transitioning a power station's primary fuel from coal to heavy fuel oil. The works require the construction of two new heavy fuel oil tanks, new auxiliary boilers, new ash injection system, upgrade of the existing HFO Systems, ancillary systems and modifications to the existing site infrastructure. As an Electrical Engineer you will be tasked to manage the key responsibilities which are listed below: - Perform role of lead electrical engineer and be responsible for the electrical engineering works on site for the successful delivery of the emergency generation projects. Manage Site teams (as required), and liaison with Station Electrical and Instrumentation (E&I) teams. Liaise with Control & Instrumentation, Mechanical and Civil design teams to ensure delivery co-ordination on multi-disciplinary projects. Ensure that electrical systems are installed, tested, and operated safely and efficiently in accordance with regulations, standards, and guidelines. Co-ordinate electrical testing and commissioning activities on Low Voltage (LV), Medium Voltage (MV) and High Voltage (HV) systems and provide advice on testing and commissioning procedures and documentation. Support the management of projects from installation, commissioning, and handover. Support the team of electrical engineers delivering engineering design and support services for generating technologies. Support for the Safety Systems at site and apply a high level of safety standards in every aspect of the work. Skills and Experience Proven track record of significant experience in the power generation industry. A minimum of 7 years' relevant experience is required. Design, and Construction or Commissioning experience, is preferred. Extensive knowledge of electrical equipment utilised in power plant projects, preferably including LV and MV Proven ability to deliver on the key responsibilities outlined above. A proven track record in delivering complex engineering projects and ability to manage multiple projects. Experience of Project Management tools would be an advantage. Working knowledge of Health, Safety and Environment Standards, and Electrical Safety procedures An EU/British passport will be required for this role, as the role requires onsite working Monday to Friday. The daily rate on offer is €750 all-inclusive (no expenses). Further information is available upon request.
Are you ready to dive into the world of data engineering? Join a leading player in Switzerland's energy sector! The company oversees the nation's high-voltage grid, ensuring reliable electricity and promoting the integration of renewable energy sources. The ideal candidate will handle data correctly, manage the Power Line Systems (PLS-CADD) software, and maintain and improve the 3D models of power lines. Job Title: Data Engineer Job Type: Permanent Salary: Up to 135k CHF per annum + Benefits Hybrid Responsibilities: Analyzes and evaluations on the 3D pipe models managed in PLS-CADD. Assist in performing data collection and data manipulation. Development of processes for automated quality control as well as data maintenance and analyzes using FME and PLS-CADD. Responding to third-party inquiries regarding options for building near power lines and providing data for standoff studies and NISV calculations. Support of the PLS-CADD application (clients, software, licenses) in collaboration with our IT as well as technical support in the use of PLS-CADD and training of users. Required: Seeking technician/engineer with electrical engineering or geomatics/geoinformatics background. Experience in data management with PLS-CADD or similar systems, AutoCAD 3D, and ideally FME. Familiarity with Swiss legal requirements like LeV and NISV is beneficial. Strong analytical, conceptual, and language skills, particularly in German and English. Benefits: Flexible 42-hour workweek with remote options 25-30 days annual leave plus Christmas-New Year holidays Robust social benefits and pension fund Support for internal/external training Don't miss out on this opportunity to be part of something truly transformative. Reach out to Harleen Barmi to learn more or apply now to kickstart your journey of shaping the future.
26/04/2024
Full time
Are you ready to dive into the world of data engineering? Join a leading player in Switzerland's energy sector! The company oversees the nation's high-voltage grid, ensuring reliable electricity and promoting the integration of renewable energy sources. The ideal candidate will handle data correctly, manage the Power Line Systems (PLS-CADD) software, and maintain and improve the 3D models of power lines. Job Title: Data Engineer Job Type: Permanent Salary: Up to 135k CHF per annum + Benefits Hybrid Responsibilities: Analyzes and evaluations on the 3D pipe models managed in PLS-CADD. Assist in performing data collection and data manipulation. Development of processes for automated quality control as well as data maintenance and analyzes using FME and PLS-CADD. Responding to third-party inquiries regarding options for building near power lines and providing data for standoff studies and NISV calculations. Support of the PLS-CADD application (clients, software, licenses) in collaboration with our IT as well as technical support in the use of PLS-CADD and training of users. Required: Seeking technician/engineer with electrical engineering or geomatics/geoinformatics background. Experience in data management with PLS-CADD or similar systems, AutoCAD 3D, and ideally FME. Familiarity with Swiss legal requirements like LeV and NISV is beneficial. Strong analytical, conceptual, and language skills, particularly in German and English. Benefits: Flexible 42-hour workweek with remote options 25-30 days annual leave plus Christmas-New Year holidays Robust social benefits and pension fund Support for internal/external training Don't miss out on this opportunity to be part of something truly transformative. Reach out to Harleen Barmi to learn more or apply now to kickstart your journey of shaping the future.