JOB: Working across an Assets and Connections Portfolio, the successful candidate will be responsible for producing and assuring high quality electrical and circuit designs to an agreed scope. Designs to be delivered to cost, time and quality targets. All designs must meet design and CDM standards. These designs could be for APP and/or Connections (non-contestable and contestable) work. The successful candidate will be expected to work as part of a multi-disciplinary team, delivering design technical excellence by ensuring compliance to design, CDM and relevant standards for the regulated network solutions for all APP and Connection schemes. ACCOUNTABILITIES: Production of Electrical Designs and circuit designs (below ground and in air) that can be constructed in compliance with standards and CDM requirements with no supervision and assure others designs. Deliver effective designs, which conform to all relevant Codes of Practice and company and industry standards, in conjunction with Electrical Design. Contribute to the production of technical, commercial and contractual documents for procurement of engineering products. Ensure compliance with all relevant legislation, regulations, and company procedures. Compliance with design assurance and audit processes Preparation of concept and developed design, from specifications and drawings within defined periods. Provide an excellent service to the customer. Work as a Team Player within larger multi-disciplinary teams. Liaise with the operational teams to ensure a smooth process from initial enquiry through to final energisation and project closure. Complying with the requirements of the designer/principal designer as determined by the 2015 CDM Regulations. Ensure design eliminates any hazards which may give rise to risks; and reduce risks from any remaining hazards (in conjunction with CDM). Ensure solutions provide sufficient information about aspects of the design of the network, its construction and maintenance as will adequately assist clients, the CDM team, other designers, and contractors. Supporting and mentoring other members of the team to enhance their technical knowledge and experience. SKILLS, QUALIFICATIONS AND EXPERIENCE: Strong Electrical engineering background and experience in electrical engineering. Knowledge of power system and protection design at 132KV, 33KV, 11KV, and intermediate voltages. Electrical/Circuit Engineering degree or STEM equivalent with proven relevant Electrical/Cable/OHL and substation design experience. Circuit engineering background and extensive experience in EHV circuit design and construction works, ideally within Utility sector. Competence in resolving circuit network issues and ability to provide a sound understanding of company standards and policies and their application to this role. Awareness of current and technological developments in circuit engineering. Extensive Knowledge of design processes and relevant DNO, ENA and International Design Standards including relevant operational aspects to successfully deliver designs. Ability to work with external engineering organisations and customers/stakeholders representing UKPN to best effect. Capable to sign off the designs. A good safety culture and sound understanding of Construction Design and Management (CDM) Regulations and their application in this role. Ability to work unsupervised, set and comply with own targets, and identify and implement innovative cost saving solutions. Good team working skills. A good level of business, environmental, safety, financial, and regulatory awareness. A general appreciation of financial reporting systems. Knowledge of the ISO 9001:2000 and ISO 14001 procedures relevant to the team's activities. Manage (not line manage) and communicate with the CAD team to produce design drawings suitable for construction. Experience of undertaking cable sizing/rating calculations for 11kV up to 132kV networks, for both solidly and cross bonded circuits (including de-rating aspects and short circuit loadings). Experience of undertaking cable pulling calculations for 11kV up to 132kV networks, in line with company standards. Experience in designing joint/pulling bays from 11kV up to 132kV. Experience in designing pilot/fibre cable routes, including splice chambers. Experience in terminations to indoor/outdoor switchgear/cable sealing ends. Experience in route proving, to determine the most cost effective and safest route install. Experience of directional drills and ability to advise/assure requirements accordingly. Excellent communication and organizational skills required, especially in relation to dealing with survey companies to obtain utility search information. Experience with producing Bills of Materials, particularly cable drum lengths, in coordination with pulling calculations. Liaise with Wayleaves and Consents to determine most feasible route. Knowledge of project management. Proficient in the use of Microsoft desktop applications, in particular: Word, Excel, and PowerPoint. Strong interpersonal skills and be competent in written and oral communications. Proficient in the use of AutoCAD and or Micro station. Awareness of current and technological developments in distribution plant and equipment. Input into innovative construction ideas and techniques, which feed into UK Power Networks Green Action Plan. Chartered Engineer or working towards achieving Chartership. PACKAGE: £70,000 - £78,132 - + car + London Allowance + bonus + benefit Annual Leave Personal Pension Plan - Personal contribution rates of 4% or 5% (UK Power Networks will make a corresponding contribution of 8% or 10%) Tenancy Loan Deposit scheme Tax efficient benefits: cycle to work scheme Season ticket loan Occupational Health support Switched On - scheme providing discount on hundreds of retailers products. Discounted access to sports and social clubs Employee Assistance Programme
03/05/2024
Full time
JOB: Working across an Assets and Connections Portfolio, the successful candidate will be responsible for producing and assuring high quality electrical and circuit designs to an agreed scope. Designs to be delivered to cost, time and quality targets. All designs must meet design and CDM standards. These designs could be for APP and/or Connections (non-contestable and contestable) work. The successful candidate will be expected to work as part of a multi-disciplinary team, delivering design technical excellence by ensuring compliance to design, CDM and relevant standards for the regulated network solutions for all APP and Connection schemes. ACCOUNTABILITIES: Production of Electrical Designs and circuit designs (below ground and in air) that can be constructed in compliance with standards and CDM requirements with no supervision and assure others designs. Deliver effective designs, which conform to all relevant Codes of Practice and company and industry standards, in conjunction with Electrical Design. Contribute to the production of technical, commercial and contractual documents for procurement of engineering products. Ensure compliance with all relevant legislation, regulations, and company procedures. Compliance with design assurance and audit processes Preparation of concept and developed design, from specifications and drawings within defined periods. Provide an excellent service to the customer. Work as a Team Player within larger multi-disciplinary teams. Liaise with the operational teams to ensure a smooth process from initial enquiry through to final energisation and project closure. Complying with the requirements of the designer/principal designer as determined by the 2015 CDM Regulations. Ensure design eliminates any hazards which may give rise to risks; and reduce risks from any remaining hazards (in conjunction with CDM). Ensure solutions provide sufficient information about aspects of the design of the network, its construction and maintenance as will adequately assist clients, the CDM team, other designers, and contractors. Supporting and mentoring other members of the team to enhance their technical knowledge and experience. SKILLS, QUALIFICATIONS AND EXPERIENCE: Strong Electrical engineering background and experience in electrical engineering. Knowledge of power system and protection design at 132KV, 33KV, 11KV, and intermediate voltages. Electrical/Circuit Engineering degree or STEM equivalent with proven relevant Electrical/Cable/OHL and substation design experience. Circuit engineering background and extensive experience in EHV circuit design and construction works, ideally within Utility sector. Competence in resolving circuit network issues and ability to provide a sound understanding of company standards and policies and their application to this role. Awareness of current and technological developments in circuit engineering. Extensive Knowledge of design processes and relevant DNO, ENA and International Design Standards including relevant operational aspects to successfully deliver designs. Ability to work with external engineering organisations and customers/stakeholders representing UKPN to best effect. Capable to sign off the designs. A good safety culture and sound understanding of Construction Design and Management (CDM) Regulations and their application in this role. Ability to work unsupervised, set and comply with own targets, and identify and implement innovative cost saving solutions. Good team working skills. A good level of business, environmental, safety, financial, and regulatory awareness. A general appreciation of financial reporting systems. Knowledge of the ISO 9001:2000 and ISO 14001 procedures relevant to the team's activities. Manage (not line manage) and communicate with the CAD team to produce design drawings suitable for construction. Experience of undertaking cable sizing/rating calculations for 11kV up to 132kV networks, for both solidly and cross bonded circuits (including de-rating aspects and short circuit loadings). Experience of undertaking cable pulling calculations for 11kV up to 132kV networks, in line with company standards. Experience in designing joint/pulling bays from 11kV up to 132kV. Experience in designing pilot/fibre cable routes, including splice chambers. Experience in terminations to indoor/outdoor switchgear/cable sealing ends. Experience in route proving, to determine the most cost effective and safest route install. Experience of directional drills and ability to advise/assure requirements accordingly. Excellent communication and organizational skills required, especially in relation to dealing with survey companies to obtain utility search information. Experience with producing Bills of Materials, particularly cable drum lengths, in coordination with pulling calculations. Liaise with Wayleaves and Consents to determine most feasible route. Knowledge of project management. Proficient in the use of Microsoft desktop applications, in particular: Word, Excel, and PowerPoint. Strong interpersonal skills and be competent in written and oral communications. Proficient in the use of AutoCAD and or Micro station. Awareness of current and technological developments in distribution plant and equipment. Input into innovative construction ideas and techniques, which feed into UK Power Networks Green Action Plan. Chartered Engineer or working towards achieving Chartership. PACKAGE: £70,000 - £78,132 - + car + London Allowance + bonus + benefit Annual Leave Personal Pension Plan - Personal contribution rates of 4% or 5% (UK Power Networks will make a corresponding contribution of 8% or 10%) Tenancy Loan Deposit scheme Tax efficient benefits: cycle to work scheme Season ticket loan Occupational Health support Switched On - scheme providing discount on hundreds of retailers products. Discounted access to sports and social clubs Employee Assistance Programme
Electronics CAD Engineer - Safety Technology (Contract) CPS Group is seeking an Electronics CAD Engineer to join our esteemed global client based in Kent on an initial 3 - 4+ month contract, outside IR35. There is potential that this contract will be extended to 6 months. Industry: Safety Technology Location: Kent (On-site 4 days per week) Contract Length: Initially 3 - 4 months (Extensions likely and expected) Start: Immediate IR35 Status: Outside IR35 Rate: Flexible (£35 - £40 per hour +) Responsibilities: Collaborate closely with our client's team to develop and implement electronic solutions in the realm of safety technology. Engage in data Front End entry tasks involving symbols, footprints, and data sheets, ensuring accuracy and completeness. Utilize Altium CAD packages or similar Electronic CAD software proficiently to design and modify electronic components and systems. Conduct thorough checks and verifications of completed work, reporting findings promptly and accurately. Adapt to evolving project requirements and contribute proactively to process improvements. Requirements: Background in electronics with demonstrable experience working with electrical components. Proficiency in Altium CAD packages or similar Electronic CAD software. Familiarity with ERP (Enterprise Resource Planning) or PLM (Product Lifecycle Management) systems is advantageous. Strong attention to detail and a commitment to delivering high-quality work within deadlines. Excellent communication skills and the ability to collaborate effectively within a team environment. Flexibility to work on-site 4 days per week initially, transitioning to 2 days WFH once fully acclimatized with systems and processes. This role offers an exciting opportunity to contribute to cutting-edge safety technology projects and be a pivotal part of our client's dynamic team. Electronics CAD Engineer - Safety Technology (Contract) By applying to this advert you are giving CPS Group (UK) Ltd authority to hold and process your data for this specific role and any other roles we may deem suitable to you over time. We will not pass your data to any third party without your verbal or written permission to do so. All incoming and outgoing calls are recorded for training and compliance purposes. CPS Group (UK) Ltd is acting as an Employment Agency in relation to this vacancy. Our new privacy policy can be found on our website
03/05/2024
Project-based
Electronics CAD Engineer - Safety Technology (Contract) CPS Group is seeking an Electronics CAD Engineer to join our esteemed global client based in Kent on an initial 3 - 4+ month contract, outside IR35. There is potential that this contract will be extended to 6 months. Industry: Safety Technology Location: Kent (On-site 4 days per week) Contract Length: Initially 3 - 4 months (Extensions likely and expected) Start: Immediate IR35 Status: Outside IR35 Rate: Flexible (£35 - £40 per hour +) Responsibilities: Collaborate closely with our client's team to develop and implement electronic solutions in the realm of safety technology. Engage in data Front End entry tasks involving symbols, footprints, and data sheets, ensuring accuracy and completeness. Utilize Altium CAD packages or similar Electronic CAD software proficiently to design and modify electronic components and systems. Conduct thorough checks and verifications of completed work, reporting findings promptly and accurately. Adapt to evolving project requirements and contribute proactively to process improvements. Requirements: Background in electronics with demonstrable experience working with electrical components. Proficiency in Altium CAD packages or similar Electronic CAD software. Familiarity with ERP (Enterprise Resource Planning) or PLM (Product Lifecycle Management) systems is advantageous. Strong attention to detail and a commitment to delivering high-quality work within deadlines. Excellent communication skills and the ability to collaborate effectively within a team environment. Flexibility to work on-site 4 days per week initially, transitioning to 2 days WFH once fully acclimatized with systems and processes. This role offers an exciting opportunity to contribute to cutting-edge safety technology projects and be a pivotal part of our client's dynamic team. Electronics CAD Engineer - Safety Technology (Contract) By applying to this advert you are giving CPS Group (UK) Ltd authority to hold and process your data for this specific role and any other roles we may deem suitable to you over time. We will not pass your data to any third party without your verbal or written permission to do so. All incoming and outgoing calls are recorded for training and compliance purposes. CPS Group (UK) Ltd is acting as an Employment Agency in relation to this vacancy. Our new privacy policy can be found on our website
Our client, experiencing continuous growth, seeks to onboard several Control Systems Engineers to augment their team across diverse locations. About the client: They specialise in providing support for projects delivered by various service providers, catering to customers in utilities, pharmaceuticals, food & beverage, and chemicals industries. About you: The ideal candidate should possess experience in technical development of design documentation, PLC configuration, SCADA, HMI, testing, and commissioning. Success in this role hinges on a robust comprehension of the project life cycle, from conception to fruition. What's in this for you? Career development within a successful and growing business! Smooth recruitment process: Two sages only. Teams/Onsite. Key responsibilities: Generate detailed specifications and design documentation. Assume responsibility for tasks/projects. Customize and develop software for diverse applications. Conduct safe testing and commissioning in operational end-user environments. Uphold high standards and maintain consistency throughout the design process. Collaborate effectively within a team and adapt to various environments. Guarantee compliance with all aspects of the company's Integrated Management System. Skills & experience: Real Time control system design and commissioning Control system software design and testing Electrical Control Panels and commissioning Rockwell ControlLogix Siemens TIA Portal Rockwell HMI (FTView ME & SE) AVEVA System Platform Schneider ClearSCADA PLC Software - Rockwell, Siemens, Mitsubishi, Schneider HMI/SCADA Systems - Rockwell FTView ME and SE, AVEVA InTouch and System Platform, Schneider ClearSCADA, GE iFIX, Siemens WinCC Telemetry Systems - Schneider, Brodersen, Seeprol S2000 Networks - Fibre Optic, Ethernet, Profibus Previous experience in a similar role Full UK driving licence Happy to travel anywhere in the UK Personable and presentable A self-starter, adaptable and willing to learn Please apply for more information! The JM Longbridge Group is operating and advertising as an Employment Agency for permanent positions and as an Employment Business for interim/contract/temporary positions. The JM Longbridge Group is an Equal Opportunities employer and we encourage applicants from all backgrounds.
02/05/2024
Full time
Our client, experiencing continuous growth, seeks to onboard several Control Systems Engineers to augment their team across diverse locations. About the client: They specialise in providing support for projects delivered by various service providers, catering to customers in utilities, pharmaceuticals, food & beverage, and chemicals industries. About you: The ideal candidate should possess experience in technical development of design documentation, PLC configuration, SCADA, HMI, testing, and commissioning. Success in this role hinges on a robust comprehension of the project life cycle, from conception to fruition. What's in this for you? Career development within a successful and growing business! Smooth recruitment process: Two sages only. Teams/Onsite. Key responsibilities: Generate detailed specifications and design documentation. Assume responsibility for tasks/projects. Customize and develop software for diverse applications. Conduct safe testing and commissioning in operational end-user environments. Uphold high standards and maintain consistency throughout the design process. Collaborate effectively within a team and adapt to various environments. Guarantee compliance with all aspects of the company's Integrated Management System. Skills & experience: Real Time control system design and commissioning Control system software design and testing Electrical Control Panels and commissioning Rockwell ControlLogix Siemens TIA Portal Rockwell HMI (FTView ME & SE) AVEVA System Platform Schneider ClearSCADA PLC Software - Rockwell, Siemens, Mitsubishi, Schneider HMI/SCADA Systems - Rockwell FTView ME and SE, AVEVA InTouch and System Platform, Schneider ClearSCADA, GE iFIX, Siemens WinCC Telemetry Systems - Schneider, Brodersen, Seeprol S2000 Networks - Fibre Optic, Ethernet, Profibus Previous experience in a similar role Full UK driving licence Happy to travel anywhere in the UK Personable and presentable A self-starter, adaptable and willing to learn Please apply for more information! The JM Longbridge Group is operating and advertising as an Employment Agency for permanent positions and as an Employment Business for interim/contract/temporary positions. The JM Longbridge Group is an Equal Opportunities employer and we encourage applicants from all backgrounds.
Our client, experiencing continuous growth, seeks to onboard several Control Systems Engineers to augment their team across diverse locations. About the client: They specialise in providing support for projects delivered by various service providers, catering to customers in utilities, pharmaceuticals, food & beverage, and chemicals industries. About you: The ideal candidate should possess experience in technical development of design documentation, PLC configuration, SCADA, HMI, testing, and commissioning. Success in this role hinges on a robust comprehension of the project life cycle, from conception to fruition. What's in this for you? Career development within a successful and growing business! Smooth recruitment process: Two sages only. Teams/Onsite. Key responsibilities: Generate detailed specifications and design documentation. Assume responsibility for tasks/projects. Customise and develop software for diverse applications. Conduct safe testing and commissioning in operational end-user environments. Uphold high standards and maintain consistency throughout the design process. Collaborate effectively within a team and adapt to various environments. Guarantee compliance with all aspects of the company's Integrated Management System. Skills & experience: Real Time control system design and commissioning Control system software design and testing Electrical Control Panels and commissioning Rockwell ControlLogix Siemens TIA Portal Rockwell HMI (FTView ME & SE) AVEVA System Platform Schneider ClearSCADA PLC Software - Rockwell, Siemens, Mitsubishi, Schneider HMI/SCADA Systems - Rockwell FTView ME and SE, AVEVA InTouch and System Platform, Schneider ClearSCADA, GE iFIX, Siemens WinCC Telemetry Systems - Schneider, Brodersen, Seeprol S2000, Networks - Fibre Optic, Ethernet, Profibus Full UK driving licence Happy to travel anywhere in the UK Personable and presentable A self-starter, adaptable and willing to learn Please apply for more information! The JM Longbridge Group is operating and advertising as an Employment Agency for permanent positions and as an Employment Business for interim/contract/temporary positions. The JM Longbridge Group is an Equal Opportunities employer and we encourage applicants from all backgrounds.
02/05/2024
Full time
Our client, experiencing continuous growth, seeks to onboard several Control Systems Engineers to augment their team across diverse locations. About the client: They specialise in providing support for projects delivered by various service providers, catering to customers in utilities, pharmaceuticals, food & beverage, and chemicals industries. About you: The ideal candidate should possess experience in technical development of design documentation, PLC configuration, SCADA, HMI, testing, and commissioning. Success in this role hinges on a robust comprehension of the project life cycle, from conception to fruition. What's in this for you? Career development within a successful and growing business! Smooth recruitment process: Two sages only. Teams/Onsite. Key responsibilities: Generate detailed specifications and design documentation. Assume responsibility for tasks/projects. Customise and develop software for diverse applications. Conduct safe testing and commissioning in operational end-user environments. Uphold high standards and maintain consistency throughout the design process. Collaborate effectively within a team and adapt to various environments. Guarantee compliance with all aspects of the company's Integrated Management System. Skills & experience: Real Time control system design and commissioning Control system software design and testing Electrical Control Panels and commissioning Rockwell ControlLogix Siemens TIA Portal Rockwell HMI (FTView ME & SE) AVEVA System Platform Schneider ClearSCADA PLC Software - Rockwell, Siemens, Mitsubishi, Schneider HMI/SCADA Systems - Rockwell FTView ME and SE, AVEVA InTouch and System Platform, Schneider ClearSCADA, GE iFIX, Siemens WinCC Telemetry Systems - Schneider, Brodersen, Seeprol S2000, Networks - Fibre Optic, Ethernet, Profibus Full UK driving licence Happy to travel anywhere in the UK Personable and presentable A self-starter, adaptable and willing to learn Please apply for more information! The JM Longbridge Group is operating and advertising as an Employment Agency for permanent positions and as an Employment Business for interim/contract/temporary positions. The JM Longbridge Group is an Equal Opportunities employer and we encourage applicants from all backgrounds.
We are seeking a highly skilled and experienced RF Power Amplifier and RFIC Design Expert on behalf of a global IDM in telecommunications. The position is available at our client's research centre, where they lead in high-efficiency wideband power amplifier and IC design for FEMs/mobile and terminal applications. As an RF Power Amplifier and RFIC Design Expert, you will drive ground-breaking research in high-efficiency power amplifier architecture and integrated circuit design. Collaborate closely with stakeholders to define cutting-edge system and product requirements, elevating our position in mobile technology. Responsibilities: - Conduct pioneering research on high-efficiency power amplifier architectures for wideband and multi-band RF transmitters. - Explore next-gen RF transmitter efficiency enhancement technologies and pioneer new power device technology. - Lead research in high-performance and reconfigurable RFIC design, ensuring seamless integration within wideband RF Front End modules. - Tackle complex technological challenges, surpassing product requirements and setting new industry standards. - Drive innovation through proposing, reviewing, and evaluating cutting-edge technical ideas. Qualifications: - MSc or PhD in Electrical Engineering or equivalent, with 8+ years of hands-on experience in RFIC and high-efficiency RF power amplifier design. - Proficiency in RFIC/MMIC circuit design and simulation tools (ADS, MWO, Cadence, Spice, etc.). - Expertise in RF power amplifier and IC design in mobile devices, load-insensitive RF power amplifier design, and wideband power amplifier architectures. - Proven track record in designing and characterizing wideband and reconfigurable ICs for RF Front End modules. - Strong communication skills and ability to collaborate effectively with multidisciplinary teams. - Self-motivated, analytical, and problem-solving mindset. If you're looking to advance your career and aspire to shape the future of mobile technology, we'd like to hear from you.
01/05/2024
Project-based
We are seeking a highly skilled and experienced RF Power Amplifier and RFIC Design Expert on behalf of a global IDM in telecommunications. The position is available at our client's research centre, where they lead in high-efficiency wideband power amplifier and IC design for FEMs/mobile and terminal applications. As an RF Power Amplifier and RFIC Design Expert, you will drive ground-breaking research in high-efficiency power amplifier architecture and integrated circuit design. Collaborate closely with stakeholders to define cutting-edge system and product requirements, elevating our position in mobile technology. Responsibilities: - Conduct pioneering research on high-efficiency power amplifier architectures for wideband and multi-band RF transmitters. - Explore next-gen RF transmitter efficiency enhancement technologies and pioneer new power device technology. - Lead research in high-performance and reconfigurable RFIC design, ensuring seamless integration within wideband RF Front End modules. - Tackle complex technological challenges, surpassing product requirements and setting new industry standards. - Drive innovation through proposing, reviewing, and evaluating cutting-edge technical ideas. Qualifications: - MSc or PhD in Electrical Engineering or equivalent, with 8+ years of hands-on experience in RFIC and high-efficiency RF power amplifier design. - Proficiency in RFIC/MMIC circuit design and simulation tools (ADS, MWO, Cadence, Spice, etc.). - Expertise in RF power amplifier and IC design in mobile devices, load-insensitive RF power amplifier design, and wideband power amplifier architectures. - Proven track record in designing and characterizing wideband and reconfigurable ICs for RF Front End modules. - Strong communication skills and ability to collaborate effectively with multidisciplinary teams. - Self-motivated, analytical, and problem-solving mindset. If you're looking to advance your career and aspire to shape the future of mobile technology, we'd like to hear from you.
An Electrical/Electronic Engineer is required for a contract assignment with a multi-national leading defence company. Missile Architecture - Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support. It's an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: a) Specifying/determining * system electrical requirements * interface definitions and characteristics between subsystems/equipment * power architecture, including power budget and power profiles * data communication and processing architecture * requirements for EMC, bonding, grounding and screening * signal safety, including routing of safety related signals b) Supporting test and fault-finding activities during compatibility checks, risk reduction, system proving/qualification and integration c) Reviewing and authoring reports, guidelines and processes d) Design assessments and analysis e) Working to defence/industry standards f) Attending and supporting design reviews Alternatively, acting as the Equipment Manager (RMO) for specific electrical/electronic equipment(s) that are part of a missile or launcher system you will: a) Project manage the equipment(s) on behalf of the project during development, qualification and manufacture b) Own the requirements on behalf of the project for the equipment(s) c) Produce Statement(s) of Work for the associated design authority for the equipment(s) d) Create and update plans showing activities for the equipment(s) e) Manage internal & external design authorities for delivery of the equipment(s) hardware, software and deliverables to schedule, cost, quality and performance f) Hold regular progress reviews with the design authority for the equipment(s) g) Review qualification verification evidence h) Track and find resolution to equipment non-compliances i) Attend and support design reviews Skillset/experience required: Technical experience required: * electrical/electronics * interface definitions * knowledge of defence/industry standards, etc. * degree level qualification in a related subject * systems engineering * writing reports Ideally this would be within a defence related background, however, experience within other engineering industries will also be considered. Experience within these other areas are also of interest but not essential: * defence * weapon systems * power supplies * actuators * data communication * sensors * EMC * Health Usage Monitoring Systems (HUMS) * Model Based Engineering (MBE) Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
01/05/2024
Project-based
An Electrical/Electronic Engineer is required for a contract assignment with a multi-national leading defence company. Missile Architecture - Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support. It's an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: a) Specifying/determining * system electrical requirements * interface definitions and characteristics between subsystems/equipment * power architecture, including power budget and power profiles * data communication and processing architecture * requirements for EMC, bonding, grounding and screening * signal safety, including routing of safety related signals b) Supporting test and fault-finding activities during compatibility checks, risk reduction, system proving/qualification and integration c) Reviewing and authoring reports, guidelines and processes d) Design assessments and analysis e) Working to defence/industry standards f) Attending and supporting design reviews Alternatively, acting as the Equipment Manager (RMO) for specific electrical/electronic equipment(s) that are part of a missile or launcher system you will: a) Project manage the equipment(s) on behalf of the project during development, qualification and manufacture b) Own the requirements on behalf of the project for the equipment(s) c) Produce Statement(s) of Work for the associated design authority for the equipment(s) d) Create and update plans showing activities for the equipment(s) e) Manage internal & external design authorities for delivery of the equipment(s) hardware, software and deliverables to schedule, cost, quality and performance f) Hold regular progress reviews with the design authority for the equipment(s) g) Review qualification verification evidence h) Track and find resolution to equipment non-compliances i) Attend and support design reviews Skillset/experience required: Technical experience required: * electrical/electronics * interface definitions * knowledge of defence/industry standards, etc. * degree level qualification in a related subject * systems engineering * writing reports Ideally this would be within a defence related background, however, experience within other engineering industries will also be considered. Experience within these other areas are also of interest but not essential: * defence * weapon systems * power supplies * actuators * data communication * sensors * EMC * Health Usage Monitoring Systems (HUMS) * Model Based Engineering (MBE) Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
Product Owner - Eindhoven, Netherlands - Long term contract Onsite role Local candidates Someone from Automotive Industry is needed. Work in a fast-paced environment developing vehicle data collection and processing solutions with cutting edge technologies to support the tremendous amount of data connected vehicles produce Define the product vision and roadmap for the Connected Vehicle platform Partners with various business and technology teams through the entire product development life cycle, with a focus on requirement gathering and story writing Consistently manage the prioritization of the product backlog based on customer feedback, market changes and business priority Determine appropriate product release dates and content Develop strategies to drive user experience improvements and work cross-functionally to achieve results Collaborate with other product teams who depend on your team's data & capabilities. Manage a robust intake process to understand vehicle data platform needs and factor those into your priorities Be accountable for continuously improving both the coverage and quality of the vehicle data we're ingesting. Drive vehicle data insights that can be surfaced both internally and to customers, including support for predictive maintenance models and other use cases that combine vehicle data and machine learning. Collaborate with Engineering to drive the team's quarterly release plans and long-term roadmap. Your Skills & Abilities: 7+ years experience in product owner or equivalent role. A proven track-record of delivering outstanding results for customers & the business, managing significant complexity and bold timelines. You also have a bias-to-action and aren't afraid to get your hands dirty. Can set and balance priorities efficiently Solid Understanding of Agile and Scaled Agile Framework (SAFe) Ability to advocate for data consumers and ensure efficiencies of implementation across groups/departments Works independently and in a self-organized, multifaceted team environment. Can guide team discussion for product and team improvement across a wide variety of personality types. Positive relationship building skills, including the ability to relate constructively to all levels of the organization Experience working in the telematics and/or automotive space is a must Technical familiarity with automotive communication protocols and vehicle onboard diagnostics systems. Education: 4-year College degree preferably in computer science, Computer or Electrical engineering, information systems or project management or equivalent relevant experience. Master's degree preferred
01/05/2024
Project-based
Product Owner - Eindhoven, Netherlands - Long term contract Onsite role Local candidates Someone from Automotive Industry is needed. Work in a fast-paced environment developing vehicle data collection and processing solutions with cutting edge technologies to support the tremendous amount of data connected vehicles produce Define the product vision and roadmap for the Connected Vehicle platform Partners with various business and technology teams through the entire product development life cycle, with a focus on requirement gathering and story writing Consistently manage the prioritization of the product backlog based on customer feedback, market changes and business priority Determine appropriate product release dates and content Develop strategies to drive user experience improvements and work cross-functionally to achieve results Collaborate with other product teams who depend on your team's data & capabilities. Manage a robust intake process to understand vehicle data platform needs and factor those into your priorities Be accountable for continuously improving both the coverage and quality of the vehicle data we're ingesting. Drive vehicle data insights that can be surfaced both internally and to customers, including support for predictive maintenance models and other use cases that combine vehicle data and machine learning. Collaborate with Engineering to drive the team's quarterly release plans and long-term roadmap. Your Skills & Abilities: 7+ years experience in product owner or equivalent role. A proven track-record of delivering outstanding results for customers & the business, managing significant complexity and bold timelines. You also have a bias-to-action and aren't afraid to get your hands dirty. Can set and balance priorities efficiently Solid Understanding of Agile and Scaled Agile Framework (SAFe) Ability to advocate for data consumers and ensure efficiencies of implementation across groups/departments Works independently and in a self-organized, multifaceted team environment. Can guide team discussion for product and team improvement across a wide variety of personality types. Positive relationship building skills, including the ability to relate constructively to all levels of the organization Experience working in the telematics and/or automotive space is a must Technical familiarity with automotive communication protocols and vehicle onboard diagnostics systems. Education: 4-year College degree preferably in computer science, Computer or Electrical engineering, information systems or project management or equivalent relevant experience. Master's degree preferred
Senior Electrical Engineer - Hybrid - Stafford VIQU has partnered with a leading consultancy who deliver critical projects in energy, water, renewables, and manufacturing, with this role being part of the Energy team. Our client is recruiting for a Senior Electrical Engineer to oversee the full E, C & I design and implementation life cycle. The successful Senior Electrical Engineer will work on projects primarily within thermal and hydro power generation. Please note that this is a hybrid role, with 3 days per week required onsite in Stafford. Key skills & responsibilities for the Senior Electrical Engineer: Strong background within Electrical Engineering and E & I Installations Oversee full life cycle design process this includes: Creating designs from customer supplied specifications Supporting Site Acceptance Testing/Commissioning phase Experience within: Control systems within energy/utilities sector Control panel design build Field cabling systems AutoCAD Electrical Documentation to support project delivery (eg Functional Design Specification (FDS), Test Documentation, Manuals etc.) Site surveys, prep Health & Safety documentation Strong communication skills Experience with one of the following would be desirable: Rockwell (ControlLogix) Siemens (PC7S TIA Portal) Schneider (M580 M340) Role details: Job role: Senior Electrical Engineer Job type: Contract Duration: 12 months' contract Rate: £50 - £55 per hour IR35 status: Inside IR35 Location: Hybrid - Stafford To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Suzie Stone , by exploring the VIQU IT Recruitment website .
30/04/2024
Project-based
Senior Electrical Engineer - Hybrid - Stafford VIQU has partnered with a leading consultancy who deliver critical projects in energy, water, renewables, and manufacturing, with this role being part of the Energy team. Our client is recruiting for a Senior Electrical Engineer to oversee the full E, C & I design and implementation life cycle. The successful Senior Electrical Engineer will work on projects primarily within thermal and hydro power generation. Please note that this is a hybrid role, with 3 days per week required onsite in Stafford. Key skills & responsibilities for the Senior Electrical Engineer: Strong background within Electrical Engineering and E & I Installations Oversee full life cycle design process this includes: Creating designs from customer supplied specifications Supporting Site Acceptance Testing/Commissioning phase Experience within: Control systems within energy/utilities sector Control panel design build Field cabling systems AutoCAD Electrical Documentation to support project delivery (eg Functional Design Specification (FDS), Test Documentation, Manuals etc.) Site surveys, prep Health & Safety documentation Strong communication skills Experience with one of the following would be desirable: Rockwell (ControlLogix) Siemens (PC7S TIA Portal) Schneider (M580 M340) Role details: Job role: Senior Electrical Engineer Job type: Contract Duration: 12 months' contract Rate: £50 - £55 per hour IR35 status: Inside IR35 Location: Hybrid - Stafford To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Suzie Stone , by exploring the VIQU IT Recruitment website .
Lead Electrical Engineer - Inside IR35 - €750 per day! We are recruiting an Electrical Engineer for a project in County Clare, Ireland, which is expected to run until the end of February 2026. Our client is in the process of transitioning a power station's primary fuel from coal to heavy fuel oil. The works require the construction of two new heavy fuel oil tanks, new auxiliary boilers, new ash injection system, upgrade of the existing HFO Systems, ancillary systems and modifications to the existing site infrastructure. As an Electrical Engineer you will be tasked to manage the key responsibilities which are listed below: - Perform role of lead electrical engineer and be responsible for the electrical engineering works on site for the successful delivery of the emergency generation projects. Manage Site teams (as required), and liaison with Station Electrical and Instrumentation (E&I) teams. Liaise with Control & Instrumentation, Mechanical and Civil design teams to ensure delivery co-ordination on multi-disciplinary projects. Ensure that electrical systems are installed, tested, and operated safely and efficiently in accordance with regulations, standards, and guidelines. Co-ordinate electrical testing and commissioning activities on Low Voltage (LV), Medium Voltage (MV) and High Voltage (HV) systems and provide advice on testing and commissioning procedures and documentation. Support the management of projects from installation, commissioning, and handover. Support the team of electrical engineers delivering engineering design and support services for generating technologies. Support for the Safety Systems at site and apply a high level of safety standards in every aspect of the work. Skills and Experience Proven track record of significant experience in the power generation industry. A minimum of 7 years' relevant experience is required. Design, and Construction or Commissioning experience, is preferred. Extensive knowledge of electrical equipment utilised in power plant projects, preferably including LV and MV Proven ability to deliver on the key responsibilities outlined above. A proven track record in delivering complex engineering projects and ability to manage multiple projects. Experience of Project Management tools would be an advantage. Working knowledge of Health, Safety and Environment Standards, and Electrical Safety procedures An EU/British passport will be required for this role, as the role requires onsite working Monday to Friday. The daily rate on offer is €750 all-inclusive (no expenses). Further information is available upon request.
30/04/2024
Project-based
Lead Electrical Engineer - Inside IR35 - €750 per day! We are recruiting an Electrical Engineer for a project in County Clare, Ireland, which is expected to run until the end of February 2026. Our client is in the process of transitioning a power station's primary fuel from coal to heavy fuel oil. The works require the construction of two new heavy fuel oil tanks, new auxiliary boilers, new ash injection system, upgrade of the existing HFO Systems, ancillary systems and modifications to the existing site infrastructure. As an Electrical Engineer you will be tasked to manage the key responsibilities which are listed below: - Perform role of lead electrical engineer and be responsible for the electrical engineering works on site for the successful delivery of the emergency generation projects. Manage Site teams (as required), and liaison with Station Electrical and Instrumentation (E&I) teams. Liaise with Control & Instrumentation, Mechanical and Civil design teams to ensure delivery co-ordination on multi-disciplinary projects. Ensure that electrical systems are installed, tested, and operated safely and efficiently in accordance with regulations, standards, and guidelines. Co-ordinate electrical testing and commissioning activities on Low Voltage (LV), Medium Voltage (MV) and High Voltage (HV) systems and provide advice on testing and commissioning procedures and documentation. Support the management of projects from installation, commissioning, and handover. Support the team of electrical engineers delivering engineering design and support services for generating technologies. Support for the Safety Systems at site and apply a high level of safety standards in every aspect of the work. Skills and Experience Proven track record of significant experience in the power generation industry. A minimum of 7 years' relevant experience is required. Design, and Construction or Commissioning experience, is preferred. Extensive knowledge of electrical equipment utilised in power plant projects, preferably including LV and MV Proven ability to deliver on the key responsibilities outlined above. A proven track record in delivering complex engineering projects and ability to manage multiple projects. Experience of Project Management tools would be an advantage. Working knowledge of Health, Safety and Environment Standards, and Electrical Safety procedures An EU/British passport will be required for this role, as the role requires onsite working Monday to Friday. The daily rate on offer is €750 all-inclusive (no expenses). Further information is available upon request.
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
29/04/2024
Full time
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
Please note: this role is based in Somerset, please don't apply unless you can work in this location. Description The Black Hat Supervisor will support and supervise projects of Temporary Buildings or Structures erection on site (subcontracted projects). As a Black Hat (non-working supervisor), manage all Health & Safety aspects of Installation activities and on site Risk Assessments/Point of Work Risk Assessments review, Toolbox Talks and on site supervision ensuring that all company policies are adhered to. Main Responsibilities Provide technical advice and propose technical solutions where required Review and approve technical & safety documentation Be involved in technical and planning discussions with client (Principal Contractor) Ensure installation of works is as per design and process Deliver works on time and within parameters of the budget set for the task. Supervise contracted staff Prepare site reports and fill in needed documentation Manage and ensure compliance of the NNB permit to work processes Attend coordination meetings with the Principal Contractor and their other tier 1 contractors Act as Incident Controller (IC) Act as Trauma and Medical Immediate Care (TMIC) Key Skills and expertise HPC experience (desirable) Computer literate Basic mechanical & electrical knowledge Candidate must be a strong team leader who pays attention to safety and quality as a priority, always leading by example Must be able to set people to work and ensure works are delivered as per design, on time and on budget Project management Large Construction Teams management Team working and relationship-building skills Communication skills Technical skills Industrial relations management An eye for detail Problem solving Experience in managing people on large scale/international projects Qualifications Essential Level 3 Apprenticeship in at least one of the following: Engineering Construction - Pipefitting Standard or Mechanical or Plating; Maintenance and Operations Engineering Technician;Engineering Fitter;Metal Fabricator;Project Controls TechnicianEnrolment onto ILM Level 3 Certificate C&BE plus completion of Nuclear Unit or Nuclear Engineering Construction Supervisor (NECS) And at least one of the following: LATS, SMSTS or IOSH Managing Safely Essential training for the role (HPC specific training)CCNSGTMIC trained (First Aid at Work trained) TMIC trained (First Aid at Work trained) IC trained Ideally Experience on HPC one of A,B,C & D or One of the following from A or All of B and one of the following from C and D: A Level 3 Apprenticeship: - Engineering Construction - Pipefitting Standard or Mechanical or Plating; - Maintenance and Operations Engineering Technician; - Engineering Fitter; - Metal Fabricator; - Project Controls Technician Certificate of Apprenticeship in Plating ACE Card demonstrating Level 3 Diploma in any of the following disciplines: Pipefitting, Mechanical, Plating, Fabricator, B B0 H0/CSQ/SCNI/M1/HN1 large component replacement or HN1 reactor opening and closing (OFC) C Enrolment onto ILM Level 3 Certificate C&BE plus completion of Nuclear Unit Nuclear Engineering Construction Supervisor (NECS) D LATS SMSTS IOSH Managing Safely
29/04/2024
Project-based
Please note: this role is based in Somerset, please don't apply unless you can work in this location. Description The Black Hat Supervisor will support and supervise projects of Temporary Buildings or Structures erection on site (subcontracted projects). As a Black Hat (non-working supervisor), manage all Health & Safety aspects of Installation activities and on site Risk Assessments/Point of Work Risk Assessments review, Toolbox Talks and on site supervision ensuring that all company policies are adhered to. Main Responsibilities Provide technical advice and propose technical solutions where required Review and approve technical & safety documentation Be involved in technical and planning discussions with client (Principal Contractor) Ensure installation of works is as per design and process Deliver works on time and within parameters of the budget set for the task. Supervise contracted staff Prepare site reports and fill in needed documentation Manage and ensure compliance of the NNB permit to work processes Attend coordination meetings with the Principal Contractor and their other tier 1 contractors Act as Incident Controller (IC) Act as Trauma and Medical Immediate Care (TMIC) Key Skills and expertise HPC experience (desirable) Computer literate Basic mechanical & electrical knowledge Candidate must be a strong team leader who pays attention to safety and quality as a priority, always leading by example Must be able to set people to work and ensure works are delivered as per design, on time and on budget Project management Large Construction Teams management Team working and relationship-building skills Communication skills Technical skills Industrial relations management An eye for detail Problem solving Experience in managing people on large scale/international projects Qualifications Essential Level 3 Apprenticeship in at least one of the following: Engineering Construction - Pipefitting Standard or Mechanical or Plating; Maintenance and Operations Engineering Technician;Engineering Fitter;Metal Fabricator;Project Controls TechnicianEnrolment onto ILM Level 3 Certificate C&BE plus completion of Nuclear Unit or Nuclear Engineering Construction Supervisor (NECS) And at least one of the following: LATS, SMSTS or IOSH Managing Safely Essential training for the role (HPC specific training)CCNSGTMIC trained (First Aid at Work trained) TMIC trained (First Aid at Work trained) IC trained Ideally Experience on HPC one of A,B,C & D or One of the following from A or All of B and one of the following from C and D: A Level 3 Apprenticeship: - Engineering Construction - Pipefitting Standard or Mechanical or Plating; - Maintenance and Operations Engineering Technician; - Engineering Fitter; - Metal Fabricator; - Project Controls Technician Certificate of Apprenticeship in Plating ACE Card demonstrating Level 3 Diploma in any of the following disciplines: Pipefitting, Mechanical, Plating, Fabricator, B B0 H0/CSQ/SCNI/M1/HN1 large component replacement or HN1 reactor opening and closing (OFC) C Enrolment onto ILM Level 3 Certificate C&BE plus completion of Nuclear Unit Nuclear Engineering Construction Supervisor (NECS) D LATS SMSTS IOSH Managing Safely
ENGINEERING MANAGER Up to £75 per hour Plymouth - Hybrid (2-3 days in office) Discovering unparalleled innovation and expertise with a global leader in engineering and technology solutions, looking for an ENGINEERING MANAGER . You will experience top-tier services designed to elevate your projects and exceed expectations working with them. You will be involved in supporting the Design and Safety Manager with day-to-day engineering decisions. Report directly to the Design and Safety Manager and provide support to them, ensuring the delivery of engineering outcomes and the assurance of technical documentation. Skills Required: Managed up to at least 40 engineers. Knowledge of Design and Nuclear Safety. Mechanical/Electrical/Civil experience. Background in Engineering systems and design. Preferred - extensive knowledge of design codes. Join a trusted industry leader committed to driving progress and success on a global scale. Unlock new possibilities for your ventures with their esteemed team in Defence, Nuclear, Marine, and more. *PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role.
29/04/2024
Project-based
ENGINEERING MANAGER Up to £75 per hour Plymouth - Hybrid (2-3 days in office) Discovering unparalleled innovation and expertise with a global leader in engineering and technology solutions, looking for an ENGINEERING MANAGER . You will experience top-tier services designed to elevate your projects and exceed expectations working with them. You will be involved in supporting the Design and Safety Manager with day-to-day engineering decisions. Report directly to the Design and Safety Manager and provide support to them, ensuring the delivery of engineering outcomes and the assurance of technical documentation. Skills Required: Managed up to at least 40 engineers. Knowledge of Design and Nuclear Safety. Mechanical/Electrical/Civil experience. Background in Engineering systems and design. Preferred - extensive knowledge of design codes. Join a trusted industry leader committed to driving progress and success on a global scale. Unlock new possibilities for your ventures with their esteemed team in Defence, Nuclear, Marine, and more. *PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role.