Senior Document Controller Initial 12 month contract Leatherhead (Hybrid) £30 per hour. Umbrella. Advantage Resourcing are working in partnership with a large engineering organisation who are currently seeking a Document Controller to work on an offshore project Your responsibilities will include: Under broad direction, oversees and performs the full range of activities with associated with document management work on a Project. Coordinate execution of the document management plan and procedures. Collaborates within the department, and the Client and customer, to ensure work processes are aligned with project processes and contractual requirements. Ensure document management deliverables are understood and delivered to contract, quality, and schedule requirements. Ensures the correct implementation, utilization, maintenance and use of the Document Management processes, systems, tools eg, IPMS, Documentum, SharePoint etc. This role is to support client with their document management system and processes and to interface with engineering contractors. Skills Required: Communicate/liaison with Project Management & Team, Client and Sub-Contractors effectively and resolve problems & issues relating to documentation, information and associated data. Proficient in Engineering & Supplier Document distribution management. Define and develop Project Document reports and statistics. Work within an integrated, multi-location, Document Management team. Communicates regularly with Document Management employees in various global offices by use of briefing sessions to share knowledge, best practices and lessons learned. Production and update of Master Document Register. Manage development and update of Distribution Matrix Production and update of Supplier SDRL/SDLs within Project EDMS Operate Document Request for Release process. If you are a Senior Document Controller seeking a new opportunity, please apply now. Reference: 72884 Hafsa Akram
03/05/2024
Project-based
Senior Document Controller Initial 12 month contract Leatherhead (Hybrid) £30 per hour. Umbrella. Advantage Resourcing are working in partnership with a large engineering organisation who are currently seeking a Document Controller to work on an offshore project Your responsibilities will include: Under broad direction, oversees and performs the full range of activities with associated with document management work on a Project. Coordinate execution of the document management plan and procedures. Collaborates within the department, and the Client and customer, to ensure work processes are aligned with project processes and contractual requirements. Ensure document management deliverables are understood and delivered to contract, quality, and schedule requirements. Ensures the correct implementation, utilization, maintenance and use of the Document Management processes, systems, tools eg, IPMS, Documentum, SharePoint etc. This role is to support client with their document management system and processes and to interface with engineering contractors. Skills Required: Communicate/liaison with Project Management & Team, Client and Sub-Contractors effectively and resolve problems & issues relating to documentation, information and associated data. Proficient in Engineering & Supplier Document distribution management. Define and develop Project Document reports and statistics. Work within an integrated, multi-location, Document Management team. Communicates regularly with Document Management employees in various global offices by use of briefing sessions to share knowledge, best practices and lessons learned. Production and update of Master Document Register. Manage development and update of Distribution Matrix Production and update of Supplier SDRL/SDLs within Project EDMS Operate Document Request for Release process. If you are a Senior Document Controller seeking a new opportunity, please apply now. Reference: 72884 Hafsa Akram
Job Title: Axiom Developer Location: Glasgow Work from Office: Work 2 days a week from the office Mandatory Skills: Axiom SL ControllerView CV10 Oracle SQL, PL/SQL Unix, Shell Scripting Autosys (batch job configuration) Desired Skills: SDLC and Agile full life cycle knowledge Finance industry exposure Regulatory Reporting platform knowledge Lifecycle tools such as Jira, Rally Roles and Responsibilities: Independently design and develop Axiom ControllerView CV10 objects, including Freeform Reports, Aggregations, Data Models, Data Sources, Portfolios, etc. Troubleshoot production issues and provide solutions. Provide user support for UAT execution. Must have 6+ years of development experience, with at least 3 years on Axiom. Axiom ControllerView Certified is a plus. Experience with PL/SQL is required. Experience in Regulatory and Risk reporting such as FRY 9C, FFIECxxx, 14M, 14Q is preferred. Creation of Data Sources, Data Models, Shorthands, Portfolios, Aggregations, Free Form and Tabular Report and workflows using AXIOM ControllerView tool based on Regulatory Report Requirements. Migration of Axiom components from one environment to another. Understanding the Functional documents and work with BA/Users to develop the reports. Contribute on behalf of Technology Team to any need of Reconciliation across streams. Experience with Data warehousing. Good experience in Regulatory Reporting and Data Warehousing. Work in the role of an Axiom Developer in a fast-paced environment, must be a self-starter, comfortable dealing with clients, VERY STRONG communication skills.
02/05/2024
Full time
Job Title: Axiom Developer Location: Glasgow Work from Office: Work 2 days a week from the office Mandatory Skills: Axiom SL ControllerView CV10 Oracle SQL, PL/SQL Unix, Shell Scripting Autosys (batch job configuration) Desired Skills: SDLC and Agile full life cycle knowledge Finance industry exposure Regulatory Reporting platform knowledge Lifecycle tools such as Jira, Rally Roles and Responsibilities: Independently design and develop Axiom ControllerView CV10 objects, including Freeform Reports, Aggregations, Data Models, Data Sources, Portfolios, etc. Troubleshoot production issues and provide solutions. Provide user support for UAT execution. Must have 6+ years of development experience, with at least 3 years on Axiom. Axiom ControllerView Certified is a plus. Experience with PL/SQL is required. Experience in Regulatory and Risk reporting such as FRY 9C, FFIECxxx, 14M, 14Q is preferred. Creation of Data Sources, Data Models, Shorthands, Portfolios, Aggregations, Free Form and Tabular Report and workflows using AXIOM ControllerView tool based on Regulatory Report Requirements. Migration of Axiom components from one environment to another. Understanding the Functional documents and work with BA/Users to develop the reports. Contribute on behalf of Technology Team to any need of Reconciliation across streams. Experience with Data warehousing. Good experience in Regulatory Reporting and Data Warehousing. Work in the role of an Axiom Developer in a fast-paced environment, must be a self-starter, comfortable dealing with clients, VERY STRONG communication skills.
Role: We are currently looking for an experienced BMS commissioing engineer based in London. you will be coving sites within the M25 corridor. We are looking for someone who has experience with one or more of the following systems (Trend, Tridium, Schneider, Ecostructure, Distech). Responsibilities: Commission, co-ordinate and complete the installation of BMS systems within set timescales, budgetary constraints and in accordance with customers' requirements. Conduct functional testing and verification of BMS components and software. Assist the project team with the development of project documentation and software including DOP's, plant and point schedules, networks design and BMS controller software. Troubleshoot and resolve technical issues during the commissioning process. Collaborate with project managers, engineers, and clients to ensure successful project delivery. Package: Salary £50-55k Car or Car allowance pension contribution
01/05/2024
Full time
Role: We are currently looking for an experienced BMS commissioing engineer based in London. you will be coving sites within the M25 corridor. We are looking for someone who has experience with one or more of the following systems (Trend, Tridium, Schneider, Ecostructure, Distech). Responsibilities: Commission, co-ordinate and complete the installation of BMS systems within set timescales, budgetary constraints and in accordance with customers' requirements. Conduct functional testing and verification of BMS components and software. Assist the project team with the development of project documentation and software including DOP's, plant and point schedules, networks design and BMS controller software. Troubleshoot and resolve technical issues during the commissioning process. Collaborate with project managers, engineers, and clients to ensure successful project delivery. Package: Salary £50-55k Car or Car allowance pension contribution
Senior Connectivity Firmware/Test Engineer 1 year freelance contract + extensions after Leuven, Belgium (2 days remote per week) Within our Personal Health R&D group, we want to capture the strong market growth in ICs for hearing aids and implants, hearables, wearables, and personal health monitoring applications, health IoT. Owing to our success, our department of 40+ engineers is growing, and we have challenging opportunities for software engineers. Our System-on-Chip products employ the latest Bluetooth Smart (BLE) or NFC with our experience in ultra-low power design. We develop the full software stack from driver-level all to way to turnkey applications, enabling our customers to build their products with minimum effort. Description of services: Unconditionally technically responsible for a subsystem, application Estimate the effort for your work and contribute to reviewing the estimates of peers Execute feasibility studies to underpin the estimations Create a design for the software Organize or contribute to (mutual) reviews of designs with colleagues and Software Architect Plan your assignments and report on progress Contribute to specifying and developing automated regression test frameworks. Document functional and performance specifications, test design documentation and develop the test strategy and test specifications. Work with the development team to develop and guide the implementation of module, systems and end to end tests (functional + performance testing) to fit in the test framework. Develop test automations using Python, Jenkins. Experience: Master's degree in Software Engineering or Electronics or, have reached this level through another form of training or experience. 3-5 years Embedded software/firmware development experience, in either the mobile industry or in semiconductors. Proud software craftsman with solid BLE 5.X experience, preferably in both Link Layer and Host stack Natural team player and obsessive to learn and gain experience Spoken and written English Knowledge of design methods and software engineering processes, Microcontroller architectures and peripherals, Embedded programming in C. Strong Python programming skills Building Real Time systems on bare metal or using an RTOS, structured debugging, interpretation of PCB schematics. Practical experience using the Scrum framework Experience in technical coaching of junior team members Additional context of the role: Idea is to find a candidate with a strong BLE knowledge. The work to be done is to develop the upper level (application level) of the BLE communication protocol stack which are not yet existing. To do this, knowledge/understanding/experience of the lower levels is absolutely necessary ( Link Layer and Host stack). The testing part of the job will be relatively limited to the beginning of the assignment. At that time 50% of the time should be spend within the R&D team which is currently struggling with the validation testing. Helping on this aspect will serve as an introduction to the product for the candidate. Finally, we want a senior profile as one of the tasks will be to lead the team in the "go to market strategy". The product till now is developed for use cases of specific customers but idea is to make it a mass product. The senior engineer should help here to identify what may be missing in the product to reach a broader audience, for example by comparison with competitors. This part will require again to interact with the R&D team.
30/04/2024
Project-based
Senior Connectivity Firmware/Test Engineer 1 year freelance contract + extensions after Leuven, Belgium (2 days remote per week) Within our Personal Health R&D group, we want to capture the strong market growth in ICs for hearing aids and implants, hearables, wearables, and personal health monitoring applications, health IoT. Owing to our success, our department of 40+ engineers is growing, and we have challenging opportunities for software engineers. Our System-on-Chip products employ the latest Bluetooth Smart (BLE) or NFC with our experience in ultra-low power design. We develop the full software stack from driver-level all to way to turnkey applications, enabling our customers to build their products with minimum effort. Description of services: Unconditionally technically responsible for a subsystem, application Estimate the effort for your work and contribute to reviewing the estimates of peers Execute feasibility studies to underpin the estimations Create a design for the software Organize or contribute to (mutual) reviews of designs with colleagues and Software Architect Plan your assignments and report on progress Contribute to specifying and developing automated regression test frameworks. Document functional and performance specifications, test design documentation and develop the test strategy and test specifications. Work with the development team to develop and guide the implementation of module, systems and end to end tests (functional + performance testing) to fit in the test framework. Develop test automations using Python, Jenkins. Experience: Master's degree in Software Engineering or Electronics or, have reached this level through another form of training or experience. 3-5 years Embedded software/firmware development experience, in either the mobile industry or in semiconductors. Proud software craftsman with solid BLE 5.X experience, preferably in both Link Layer and Host stack Natural team player and obsessive to learn and gain experience Spoken and written English Knowledge of design methods and software engineering processes, Microcontroller architectures and peripherals, Embedded programming in C. Strong Python programming skills Building Real Time systems on bare metal or using an RTOS, structured debugging, interpretation of PCB schematics. Practical experience using the Scrum framework Experience in technical coaching of junior team members Additional context of the role: Idea is to find a candidate with a strong BLE knowledge. The work to be done is to develop the upper level (application level) of the BLE communication protocol stack which are not yet existing. To do this, knowledge/understanding/experience of the lower levels is absolutely necessary ( Link Layer and Host stack). The testing part of the job will be relatively limited to the beginning of the assignment. At that time 50% of the time should be spend within the R&D team which is currently struggling with the validation testing. Helping on this aspect will serve as an introduction to the product for the candidate. Finally, we want a senior profile as one of the tasks will be to lead the team in the "go to market strategy". The product till now is developed for use cases of specific customers but idea is to make it a mass product. The senior engineer should help here to identify what may be missing in the product to reach a broader audience, for example by comparison with competitors. This part will require again to interact with the R&D team.
Exciting Opportunity for Embedded Design Engineer Are you a talented Embedded Design Engineer looking for a challenging and rewarding permanent position? Our client, a leading technology company, is seeking a skilled professional to join their dynamic team and contribute to the design and development of world-beating products. In this role, you will play a crucial part in supporting the UK-based Embedded team through an extremely busy period, juggling both New Product Development and delivering customer-funded projects based around existing product ranges. While the primary focus will be on Datalink products, you may also be asked to support other product lines within the company. Key responsibilities include: Designing firmware/software for processors and microcontrollers using Embedded C Developing solutions using Linux Creating firmware for FPGAs using VHDL/DSP Supporting production and manufacturing teams Troubleshooting firmware, software, and system issues Testing and debugging new and existing designs Creating comprehensive documentation, including requirement specifications, test plans, user information, and API documents The ideal candidate will have a minimum of 3 years of experience in an equivalent role and possess a strong skill set in C/C++, Embedded Linux, and FPGA development. Experience with DVB-T, datalink/radio technologies, video, and broadcast is a plus. A degree in electronics, computer science, or a related subject is desirable. Our client offers a competitive salary, excellent benefits, and a supportive work environment that encourages professional growth and development. If you're a self-motivated, enthusiastic team player with strong interpersonal skills and a desire to make an impact, we'd love to hear from you. Apply now and take the first step towards an exciting new chapter in your career!
30/04/2024
Full time
Exciting Opportunity for Embedded Design Engineer Are you a talented Embedded Design Engineer looking for a challenging and rewarding permanent position? Our client, a leading technology company, is seeking a skilled professional to join their dynamic team and contribute to the design and development of world-beating products. In this role, you will play a crucial part in supporting the UK-based Embedded team through an extremely busy period, juggling both New Product Development and delivering customer-funded projects based around existing product ranges. While the primary focus will be on Datalink products, you may also be asked to support other product lines within the company. Key responsibilities include: Designing firmware/software for processors and microcontrollers using Embedded C Developing solutions using Linux Creating firmware for FPGAs using VHDL/DSP Supporting production and manufacturing teams Troubleshooting firmware, software, and system issues Testing and debugging new and existing designs Creating comprehensive documentation, including requirement specifications, test plans, user information, and API documents The ideal candidate will have a minimum of 3 years of experience in an equivalent role and possess a strong skill set in C/C++, Embedded Linux, and FPGA development. Experience with DVB-T, datalink/radio technologies, video, and broadcast is a plus. A degree in electronics, computer science, or a related subject is desirable. Our client offers a competitive salary, excellent benefits, and a supportive work environment that encourages professional growth and development. If you're a self-motivated, enthusiastic team player with strong interpersonal skills and a desire to make an impact, we'd love to hear from you. Apply now and take the first step towards an exciting new chapter in your career!
Exciting Opportunity for an Electronics Engineer (Embedded DSP) at a Leading Company! Are you a passionate Embedded DSP Engineer looking to take your career to the next level? Lynx Recruitment is looking for an Electronics Engineer (Embedded DSP) to join our client's dynamic team and be at the forefront of developing cutting-edge systems. We are seeking a talented individual with 3+ years of experience as an Electronics/DSP Engineer or in a similar role. The ideal candidate must be well-versed in OFDM technologies, Forward Error Correction methods, and have a strong background in signal processing theory, algorithms, and implementation techniques. Expertise in Embedded code for timing-critical applications and DSP implementation on small microcontrollers and FPGAs is essential. As an Electronics Engineer (Embedded DSP), you will have the unique opportunity to: Take their established Wireline telemetry system to the next generation Maintain and develop the design Participate in code review and perform other programming tasks Provide troubleshooting assistance and technical support to team members Requirements: Proficiency in programming languages such as C/C++ and VHDL Proficiency in modelling packages such as Matlab or Octave Strong ability to write structured code and clear documentation Excellent analytical, problem-solving, and communication skills If you thrive in a collaborative environment and have a passion for innovation, we want to hear from you! Join our client's team and be part of a group that is pushing the boundaries of Wireline telemetry technology. Please apply now with an up to date CV! Don't miss this exciting opportunity to join a leading company and make a real impact in the industry!
30/04/2024
Full time
Exciting Opportunity for an Electronics Engineer (Embedded DSP) at a Leading Company! Are you a passionate Embedded DSP Engineer looking to take your career to the next level? Lynx Recruitment is looking for an Electronics Engineer (Embedded DSP) to join our client's dynamic team and be at the forefront of developing cutting-edge systems. We are seeking a talented individual with 3+ years of experience as an Electronics/DSP Engineer or in a similar role. The ideal candidate must be well-versed in OFDM technologies, Forward Error Correction methods, and have a strong background in signal processing theory, algorithms, and implementation techniques. Expertise in Embedded code for timing-critical applications and DSP implementation on small microcontrollers and FPGAs is essential. As an Electronics Engineer (Embedded DSP), you will have the unique opportunity to: Take their established Wireline telemetry system to the next generation Maintain and develop the design Participate in code review and perform other programming tasks Provide troubleshooting assistance and technical support to team members Requirements: Proficiency in programming languages such as C/C++ and VHDL Proficiency in modelling packages such as Matlab or Octave Strong ability to write structured code and clear documentation Excellent analytical, problem-solving, and communication skills If you thrive in a collaborative environment and have a passion for innovation, we want to hear from you! Join our client's team and be part of a group that is pushing the boundaries of Wireline telemetry technology. Please apply now with an up to date CV! Don't miss this exciting opportunity to join a leading company and make a real impact in the industry!
Please note: this role is based in Somerset, please don't apply unless you can work in this location. Description The Black Hat Supervisor will support and supervise projects of Temporary Buildings or Structures erection on site (subcontracted projects). As a Black Hat (non-working supervisor), manage all Health & Safety aspects of Installation activities and on site Risk Assessments/Point of Work Risk Assessments review, Toolbox Talks and on site supervision ensuring that all company policies are adhered to. Main Responsibilities Provide technical advice and propose technical solutions where required Review and approve technical & safety documentation Be involved in technical and planning discussions with client (Principal Contractor) Ensure installation of works is as per design and process Deliver works on time and within parameters of the budget set for the task. Supervise contracted staff Prepare site reports and fill in needed documentation Manage and ensure compliance of the NNB permit to work processes Attend coordination meetings with the Principal Contractor and their other tier 1 contractors Act as Incident Controller (IC) Act as Trauma and Medical Immediate Care (TMIC) Key Skills and expertise HPC experience (desirable) Computer literate Basic mechanical & electrical knowledge Candidate must be a strong team leader who pays attention to safety and quality as a priority, always leading by example Must be able to set people to work and ensure works are delivered as per design, on time and on budget Project management Large Construction Teams management Team working and relationship-building skills Communication skills Technical skills Industrial relations management An eye for detail Problem solving Experience in managing people on large scale/international projects Qualifications Essential Level 3 Apprenticeship in at least one of the following: Engineering Construction - Pipefitting Standard or Mechanical or Plating; Maintenance and Operations Engineering Technician;Engineering Fitter;Metal Fabricator;Project Controls TechnicianEnrolment onto ILM Level 3 Certificate C&BE plus completion of Nuclear Unit or Nuclear Engineering Construction Supervisor (NECS) And at least one of the following: LATS, SMSTS or IOSH Managing Safely Essential training for the role (HPC specific training)CCNSGTMIC trained (First Aid at Work trained) TMIC trained (First Aid at Work trained) IC trained Ideally Experience on HPC one of A,B,C & D or One of the following from A or All of B and one of the following from C and D: A Level 3 Apprenticeship: - Engineering Construction - Pipefitting Standard or Mechanical or Plating; - Maintenance and Operations Engineering Technician; - Engineering Fitter; - Metal Fabricator; - Project Controls Technician Certificate of Apprenticeship in Plating ACE Card demonstrating Level 3 Diploma in any of the following disciplines: Pipefitting, Mechanical, Plating, Fabricator, B B0 H0/CSQ/SCNI/M1/HN1 large component replacement or HN1 reactor opening and closing (OFC) C Enrolment onto ILM Level 3 Certificate C&BE plus completion of Nuclear Unit Nuclear Engineering Construction Supervisor (NECS) D LATS SMSTS IOSH Managing Safely
29/04/2024
Project-based
Please note: this role is based in Somerset, please don't apply unless you can work in this location. Description The Black Hat Supervisor will support and supervise projects of Temporary Buildings or Structures erection on site (subcontracted projects). As a Black Hat (non-working supervisor), manage all Health & Safety aspects of Installation activities and on site Risk Assessments/Point of Work Risk Assessments review, Toolbox Talks and on site supervision ensuring that all company policies are adhered to. Main Responsibilities Provide technical advice and propose technical solutions where required Review and approve technical & safety documentation Be involved in technical and planning discussions with client (Principal Contractor) Ensure installation of works is as per design and process Deliver works on time and within parameters of the budget set for the task. Supervise contracted staff Prepare site reports and fill in needed documentation Manage and ensure compliance of the NNB permit to work processes Attend coordination meetings with the Principal Contractor and their other tier 1 contractors Act as Incident Controller (IC) Act as Trauma and Medical Immediate Care (TMIC) Key Skills and expertise HPC experience (desirable) Computer literate Basic mechanical & electrical knowledge Candidate must be a strong team leader who pays attention to safety and quality as a priority, always leading by example Must be able to set people to work and ensure works are delivered as per design, on time and on budget Project management Large Construction Teams management Team working and relationship-building skills Communication skills Technical skills Industrial relations management An eye for detail Problem solving Experience in managing people on large scale/international projects Qualifications Essential Level 3 Apprenticeship in at least one of the following: Engineering Construction - Pipefitting Standard or Mechanical or Plating; Maintenance and Operations Engineering Technician;Engineering Fitter;Metal Fabricator;Project Controls TechnicianEnrolment onto ILM Level 3 Certificate C&BE plus completion of Nuclear Unit or Nuclear Engineering Construction Supervisor (NECS) And at least one of the following: LATS, SMSTS or IOSH Managing Safely Essential training for the role (HPC specific training)CCNSGTMIC trained (First Aid at Work trained) TMIC trained (First Aid at Work trained) IC trained Ideally Experience on HPC one of A,B,C & D or One of the following from A or All of B and one of the following from C and D: A Level 3 Apprenticeship: - Engineering Construction - Pipefitting Standard or Mechanical or Plating; - Maintenance and Operations Engineering Technician; - Engineering Fitter; - Metal Fabricator; - Project Controls Technician Certificate of Apprenticeship in Plating ACE Card demonstrating Level 3 Diploma in any of the following disciplines: Pipefitting, Mechanical, Plating, Fabricator, B B0 H0/CSQ/SCNI/M1/HN1 large component replacement or HN1 reactor opening and closing (OFC) C Enrolment onto ILM Level 3 Certificate C&BE plus completion of Nuclear Unit Nuclear Engineering Construction Supervisor (NECS) D LATS SMSTS IOSH Managing Safely