AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
06/05/2024
Project-based
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
Position Available: Mechanical Manufacturing Technician Location: Hertfordshire (Hybrid) & Dynamic Working Hours Salary: Up to £39,000 + Paid Overtime & Company Bonus & Very Good Pension Package, Subsidised Canteen + Gym onsite Experience needed: Experience in assembling mechanical components from smaller fixtures to larger and more complex systems. As well as this, it is essential the successful Mechanical Manufacturing Technician is able to complete and certify hardware builds by following detailed planning instructions and drawings. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Mechanical Manufacturing Technician to work in our team. In this role you will support the team in: Ensuring manufacturing build times are met. Maintaining a safe working environment and a good housekeeping policy. Ensuring compliance across all stages of the manufacturing process. Communicating best practice to other team members. Maintaining product certification and approval via regular audits. Certifying products in line with product certification procedures. What we need from you: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 is essential for this role. Formal further education certificate to HNC or equivalent certificate is a plus. Ideally have manual handling training but not essential, training can be provided. Ideally training (Including overhead cranes) but not essential, training can be provided. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable. If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
03/05/2024
Full time
Position Available: Mechanical Manufacturing Technician Location: Hertfordshire (Hybrid) & Dynamic Working Hours Salary: Up to £39,000 + Paid Overtime & Company Bonus & Very Good Pension Package, Subsidised Canteen + Gym onsite Experience needed: Experience in assembling mechanical components from smaller fixtures to larger and more complex systems. As well as this, it is essential the successful Mechanical Manufacturing Technician is able to complete and certify hardware builds by following detailed planning instructions and drawings. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Mechanical Manufacturing Technician to work in our team. In this role you will support the team in: Ensuring manufacturing build times are met. Maintaining a safe working environment and a good housekeeping policy. Ensuring compliance across all stages of the manufacturing process. Communicating best practice to other team members. Maintaining product certification and approval via regular audits. Certifying products in line with product certification procedures. What we need from you: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 is essential for this role. Formal further education certificate to HNC or equivalent certificate is a plus. Ideally have manual handling training but not essential, training can be provided. Ideally training (Including overhead cranes) but not essential, training can be provided. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable. If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
ARM (Advanced Resource Managers)
Corsham, Wiltshire
Lead Mechanical Engineer (Assembly, Integration & Testing) Corsham 12-month contract Paying up to £45p/h (Umbrella) ARM have partnered with an Aerospace client who are looking for an experienced AIT engineer to work out of their manufacturing site based in Corsham. As the AIT Lead Engineer, you'll be responsible for leading the Mechanical team and ensuring all engineering concepts are delivered to the shop floor. Responsibilities: * Leading a team of AIT engineers on specific projects as well as planning the mechanical team's activities on a weekly basis. * Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A - E' * Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures, and test reports. * Control of all project MGSE, flight & support equipment * Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. * Alignment - producing test procedures and operating and maintaining optical alignment equipment. * Designing test equipment, overseeing its manufacture, and commissioning * Mechanical handling of spacecraft, instruments, payloads, solar arrays, antennas etc * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Install and validate test instrumentation. * Support propulsion testing * Handling and installation of thermal hardware * Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation associated with performing these tasks. * Pyrotechnic handling, installation, and safety * Plan and control the workload of the AIT team consisting of engineers and technicians. * Be able to travel overseas to work for short periods (typically 2-3 months, could be 6-7 months on occasions) * Be able to integrate quickly and easily into an AIT team. Experience required: * Appreciation of satellite integration processes and project phases * Use of SAP or other ERP System * Understanding of build documentation and the need for it * Driving build quality through review of processes and implementation of improvements * Managing a team during day-to-day activities ensuring work is completed on time and the correct standard. * Controlling and delivery of projects to budget and schedule * Face-to-face dealings with customers and suppliers * Worked in volatile, high-pressure environments to resolve technical and personnel conflicts. * Spacecraft Mechanical testing on prime projects is essential. * Leading other team members * Production of MGSE specs and operation of MGSE and flight HW * Production of high-quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
03/05/2024
Project-based
Lead Mechanical Engineer (Assembly, Integration & Testing) Corsham 12-month contract Paying up to £45p/h (Umbrella) ARM have partnered with an Aerospace client who are looking for an experienced AIT engineer to work out of their manufacturing site based in Corsham. As the AIT Lead Engineer, you'll be responsible for leading the Mechanical team and ensuring all engineering concepts are delivered to the shop floor. Responsibilities: * Leading a team of AIT engineers on specific projects as well as planning the mechanical team's activities on a weekly basis. * Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A - E' * Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures, and test reports. * Control of all project MGSE, flight & support equipment * Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. * Alignment - producing test procedures and operating and maintaining optical alignment equipment. * Designing test equipment, overseeing its manufacture, and commissioning * Mechanical handling of spacecraft, instruments, payloads, solar arrays, antennas etc * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Install and validate test instrumentation. * Support propulsion testing * Handling and installation of thermal hardware * Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation associated with performing these tasks. * Pyrotechnic handling, installation, and safety * Plan and control the workload of the AIT team consisting of engineers and technicians. * Be able to travel overseas to work for short periods (typically 2-3 months, could be 6-7 months on occasions) * Be able to integrate quickly and easily into an AIT team. Experience required: * Appreciation of satellite integration processes and project phases * Use of SAP or other ERP System * Understanding of build documentation and the need for it * Driving build quality through review of processes and implementation of improvements * Managing a team during day-to-day activities ensuring work is completed on time and the correct standard. * Controlling and delivery of projects to budget and schedule * Face-to-face dealings with customers and suppliers * Worked in volatile, high-pressure environments to resolve technical and personnel conflicts. * Spacecraft Mechanical testing on prime projects is essential. * Leading other team members * Production of MGSE specs and operation of MGSE and flight HW * Production of high-quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Mechanical Technician RAF Leeming - On-Site £34,500 Lynx are partnered with an organisation based at RAF Leeming to help them find several Mechanical Technicians to be based at RAF Leeming. You will have experience either maintaining and working on Flight Lines or Base equipment, working on aircraft systems or components such as Aircraft Ground Handling, Flight Servicings, Aircraft role changes, inspections & repairs. Requirements: - Provision of Part 145; meeting delivery targets and reporting any impact on Continuing Airworthiness - Document all completion of activities - Knowledge of the relevant Continuing Airworthiness Regulatory framework - 2+ years' experience in Base/Flight Line Maintenance If this role sounds of interest, please apply for this role.
01/05/2024
Full time
Mechanical Technician RAF Leeming - On-Site £34,500 Lynx are partnered with an organisation based at RAF Leeming to help them find several Mechanical Technicians to be based at RAF Leeming. You will have experience either maintaining and working on Flight Lines or Base equipment, working on aircraft systems or components such as Aircraft Ground Handling, Flight Servicings, Aircraft role changes, inspections & repairs. Requirements: - Provision of Part 145; meeting delivery targets and reporting any impact on Continuing Airworthiness - Document all completion of activities - Knowledge of the relevant Continuing Airworthiness Regulatory framework - 2+ years' experience in Base/Flight Line Maintenance If this role sounds of interest, please apply for this role.