We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
29/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
Position: Senior Design Engineer Pay rate: £50 p/h inside IR35. location: Filton, Bristol Role Type: 12-Month Contract with Extension Position: Hybrid IO Associates seeks a Senior Design Engineer for the Filton site. Join a global aerospace leader specializing in commercial and military aircraft, helicopters, defense, and space sectors. This role offers a chance to contribute to innovative projects within a dynamic team shaping the future of aviation and space systems. Responsibilities Ensure that the structural design meets airworthiness standards and product requirements while aligning with designated Design Quality Assurance Criteria. Lead technical studies, trades, and investigations to deliver technical solutions according to relevant design methods and procedures. Support the identification, management, and timely delivery of changes through Mod opening, DFM release, and Stage 3 Closure of Mods, emphasizing adherence to cost, schedule, and quality objectives. Provide design leadership to both Internal and External designers, focusing on Lean Engineering improvements such as 'Right First Time' and Lead Time Reduction, essential for meeting design requirements within program constraints. Skills Required Your responsibilities include decision-making and influencing within a complex stakeholder and customer network to ensure successful right-first-time deliveries and meeting all planned milestones. Collaborate with and influence technical experts and specialists to achieve optimal technical and business solutions. Demonstrate a strong track record in advancing new technologies, executing Design to Cost projects, and initiating strategic technology initiatives. Proficiency in design toolsets like CATIA V5, ICC, Zamiz, ECM, Solings, and PASS is necessary, along with holding Design Authorisation Signatory authority. This is an excellent opportunity to work for an international company that encourages and facilitates personal growth. Please apply or get in touch with Munish
29/04/2024
Project-based
Position: Senior Design Engineer Pay rate: £50 p/h inside IR35. location: Filton, Bristol Role Type: 12-Month Contract with Extension Position: Hybrid IO Associates seeks a Senior Design Engineer for the Filton site. Join a global aerospace leader specializing in commercial and military aircraft, helicopters, defense, and space sectors. This role offers a chance to contribute to innovative projects within a dynamic team shaping the future of aviation and space systems. Responsibilities Ensure that the structural design meets airworthiness standards and product requirements while aligning with designated Design Quality Assurance Criteria. Lead technical studies, trades, and investigations to deliver technical solutions according to relevant design methods and procedures. Support the identification, management, and timely delivery of changes through Mod opening, DFM release, and Stage 3 Closure of Mods, emphasizing adherence to cost, schedule, and quality objectives. Provide design leadership to both Internal and External designers, focusing on Lean Engineering improvements such as 'Right First Time' and Lead Time Reduction, essential for meeting design requirements within program constraints. Skills Required Your responsibilities include decision-making and influencing within a complex stakeholder and customer network to ensure successful right-first-time deliveries and meeting all planned milestones. Collaborate with and influence technical experts and specialists to achieve optimal technical and business solutions. Demonstrate a strong track record in advancing new technologies, executing Design to Cost projects, and initiating strategic technology initiatives. Proficiency in design toolsets like CATIA V5, ICC, Zamiz, ECM, Solings, and PASS is necessary, along with holding Design Authorisation Signatory authority. This is an excellent opportunity to work for an international company that encourages and facilitates personal growth. Please apply or get in touch with Munish
PLM PROJECT MANAGER (f/m/d): CAx/custom engineering tools/international Matrix organization/Stakeholder Management/Communication skills/English/German/French Project : For our customer based in Zurich we are looking for a highly qualified PLM PROJECT MANAGER (f/m/d). Background : Our Client, headquartered in Zurich, Switzerland, is the first startup to combine agility, speed and innovation with decades of experience and proven quality. Around 1600 employees at 12 locations in six countries (Switzerland, Sweden, Austria, Germany, USA and Finland) develop and manufacture products for satellites and launch vehicles with the goal of advancing humankind and enabling the exploration of the world and beyond. Our Client is the preferred supplier of structures for all types of launch vehicles and a leader in selected satellite products and for constellations in the New Space sector. Our Client also uses its space knowledge for applications outside of space technology: The high-precision products have already been used in the semiconductor industry for more than 20 years. Job description: We have recently launched a major PLM and engineering transformation initiative, taking the company to the next generation, and are looking for the right person to drive the project. A person with key skills in project management and operations of complex PLM projects including system introduction and support as well as being able to drive change - to bring our colleges along on the journey. Focus of your work is change management and the management of the PLM implementation, external partners collaboration, engineering application landscape simplification, related projects, and introduction/consolidation of new/existing processes. The Perfect Candidate: As project manager, you are responsible for the planning, implementation, and documentation of related initiatives. You will guide the project team in the creation of requirements and functional specifications, be responsible for solution design and the implementation. You further ensure that the project targets are achieved within time, budget, and quality. Tasks & Responsibilities: * Partner to business for successful implementation and organization change management * Lead PLM system (Teamcenter) implementation and participate in end-to-end Digital transformation * Define strategies for Data migration, Design data management, BOM management, Change Management, MES, ERP & downstream system integration * Developing architectural blueprints for PLM, CAD, PLM-ERP interfaces & downstream systems * Further optimization of applications landscape for Multi-PLM, MES, M-CAD, E-CAD, FEM systems and future R&D tools * Evaluating business problems, their financial impacts, proposing solutions and driving change for key results * Own decommissioning strategies for PLM/CAD systems * Manage and train the Power User organization and create, review, and validate work instructions and training materials Must Haves: * Min. 7-10 years of working experience in a similar role and proven strengths in PLM and CAx technologies * Operational experience in CAx and custom engineering tools eg Siemens Teamcenter, NX, CATIA, SAP, IFS, Windchill, 3D experience. * Very good functional understanding and usage of various Teamcenter modules like BMIDE, Structure Manager, Workflow Designer, Change Management, BOM Configuration methodologies, Active Workspace, ERP interfaces ( eg T4S), OpsCenter and MES * Ability to work in an international Matrix organization and manage stakeholders and facilitate decision making in an international group organization * Strong communications skills in English; French nice to have Reference Nr. : 923402SDA Role : PLM PROJECT MANAGER (f/m/d) Industrie : Space Research Workplace : Zurich Pensum : 100% Start : ASAP Duration : 3 Deadline : 10.05.2024 If you are interested in this position, please send us your complete dossier via the link in this advertisement. About us: ITech Consult is an ISO 9001:2015 certified Swiss company with offices in Germany and Ireland. ITech Consult specialises in the placement of highly qualified candidates for recruitment in the fields of IT, Life Science & Engineering. We offer staff leasing & payroll services. For our candidates this is free of charge, also for Payroll we do not charge you any additional fees.
29/04/2024
Project-based
PLM PROJECT MANAGER (f/m/d): CAx/custom engineering tools/international Matrix organization/Stakeholder Management/Communication skills/English/German/French Project : For our customer based in Zurich we are looking for a highly qualified PLM PROJECT MANAGER (f/m/d). Background : Our Client, headquartered in Zurich, Switzerland, is the first startup to combine agility, speed and innovation with decades of experience and proven quality. Around 1600 employees at 12 locations in six countries (Switzerland, Sweden, Austria, Germany, USA and Finland) develop and manufacture products for satellites and launch vehicles with the goal of advancing humankind and enabling the exploration of the world and beyond. Our Client is the preferred supplier of structures for all types of launch vehicles and a leader in selected satellite products and for constellations in the New Space sector. Our Client also uses its space knowledge for applications outside of space technology: The high-precision products have already been used in the semiconductor industry for more than 20 years. Job description: We have recently launched a major PLM and engineering transformation initiative, taking the company to the next generation, and are looking for the right person to drive the project. A person with key skills in project management and operations of complex PLM projects including system introduction and support as well as being able to drive change - to bring our colleges along on the journey. Focus of your work is change management and the management of the PLM implementation, external partners collaboration, engineering application landscape simplification, related projects, and introduction/consolidation of new/existing processes. The Perfect Candidate: As project manager, you are responsible for the planning, implementation, and documentation of related initiatives. You will guide the project team in the creation of requirements and functional specifications, be responsible for solution design and the implementation. You further ensure that the project targets are achieved within time, budget, and quality. Tasks & Responsibilities: * Partner to business for successful implementation and organization change management * Lead PLM system (Teamcenter) implementation and participate in end-to-end Digital transformation * Define strategies for Data migration, Design data management, BOM management, Change Management, MES, ERP & downstream system integration * Developing architectural blueprints for PLM, CAD, PLM-ERP interfaces & downstream systems * Further optimization of applications landscape for Multi-PLM, MES, M-CAD, E-CAD, FEM systems and future R&D tools * Evaluating business problems, their financial impacts, proposing solutions and driving change for key results * Own decommissioning strategies for PLM/CAD systems * Manage and train the Power User organization and create, review, and validate work instructions and training materials Must Haves: * Min. 7-10 years of working experience in a similar role and proven strengths in PLM and CAx technologies * Operational experience in CAx and custom engineering tools eg Siemens Teamcenter, NX, CATIA, SAP, IFS, Windchill, 3D experience. * Very good functional understanding and usage of various Teamcenter modules like BMIDE, Structure Manager, Workflow Designer, Change Management, BOM Configuration methodologies, Active Workspace, ERP interfaces ( eg T4S), OpsCenter and MES * Ability to work in an international Matrix organization and manage stakeholders and facilitate decision making in an international group organization * Strong communications skills in English; French nice to have Reference Nr. : 923402SDA Role : PLM PROJECT MANAGER (f/m/d) Industrie : Space Research Workplace : Zurich Pensum : 100% Start : ASAP Duration : 3 Deadline : 10.05.2024 If you are interested in this position, please send us your complete dossier via the link in this advertisement. About us: ITech Consult is an ISO 9001:2015 certified Swiss company with offices in Germany and Ireland. ITech Consult specialises in the placement of highly qualified candidates for recruitment in the fields of IT, Life Science & Engineering. We offer staff leasing & payroll services. For our candidates this is free of charge, also for Payroll we do not charge you any additional fees.
Flint is looking for a Network Design Specialist for a long-term contracting opportunity with one of the major telecommunication providers in the UK. 3 months rolling/London-Bristol, Hybrid/Start: Asap Skills required for the job Technical Expertise: Expert knowledge of UE logs analysis Expert understanding of Acuver UE logging tools. In depth knowledge of Mobile networks particularly 4G & Public Safety functionality over LTE with particularly deep understanding design and operation. In depth knowledge of LTE & SIP signalling, PTT (push to talk), SRTP/DTLS troubleshooting & Optimisation. Excellent understanding of Nokia and Ericsson RAN products. Good understanding of 3GPP & ETSI specifications. Good understding of DTLS/SRTP protols. Experience you would be expected to have MANDATORY: Extensive experience in mobile telecommunications industry in the role of a lead designer with business-critical, high-availability/high-throughput systems and networks. Able to provide technical solutions, processes definition for network performance & optimisation of 4G based RAN Macro network. Proven experience in defining and understanding KPI definitions, formula and measurements of radio networks Able to analyse in depth, drive test logs, wireshark traces and protocol analysers traces for 4G networks Good Knowledge of LTE parameters & timers. Familiarity with test software & devices (Nemo/TEMs/Accuver) & post processing tools (Actix). Experience of working with 3rd parties network/IT Suppliers. Experience of Nokia RAN. PREFFERRED: Knowledge of multiple vendor products including Huawei, Ericsson and Parallel Wireless. Knowledge of industry best practice methodologies for analysing, defining and documenting the link between input business requirements and output technical solutions. Understanding of project management techniques and tools. Experience of managing relationships with suppliers and third-parties, of product/feature selection and of delivering those products into a production environment. Experience of working with LTE Commercial network based Public Safety solutions.
29/04/2024
Project-based
Flint is looking for a Network Design Specialist for a long-term contracting opportunity with one of the major telecommunication providers in the UK. 3 months rolling/London-Bristol, Hybrid/Start: Asap Skills required for the job Technical Expertise: Expert knowledge of UE logs analysis Expert understanding of Acuver UE logging tools. In depth knowledge of Mobile networks particularly 4G & Public Safety functionality over LTE with particularly deep understanding design and operation. In depth knowledge of LTE & SIP signalling, PTT (push to talk), SRTP/DTLS troubleshooting & Optimisation. Excellent understanding of Nokia and Ericsson RAN products. Good understanding of 3GPP & ETSI specifications. Good understding of DTLS/SRTP protols. Experience you would be expected to have MANDATORY: Extensive experience in mobile telecommunications industry in the role of a lead designer with business-critical, high-availability/high-throughput systems and networks. Able to provide technical solutions, processes definition for network performance & optimisation of 4G based RAN Macro network. Proven experience in defining and understanding KPI definitions, formula and measurements of radio networks Able to analyse in depth, drive test logs, wireshark traces and protocol analysers traces for 4G networks Good Knowledge of LTE parameters & timers. Familiarity with test software & devices (Nemo/TEMs/Accuver) & post processing tools (Actix). Experience of working with 3rd parties network/IT Suppliers. Experience of Nokia RAN. PREFFERRED: Knowledge of multiple vendor products including Huawei, Ericsson and Parallel Wireless. Knowledge of industry best practice methodologies for analysing, defining and documenting the link between input business requirements and output technical solutions. Understanding of project management techniques and tools. Experience of managing relationships with suppliers and third-parties, of product/feature selection and of delivering those products into a production environment. Experience of working with LTE Commercial network based Public Safety solutions.
Oracle Lead Solutions Designer FP&A - Hybrid - 3 days per week onsite in London, 2 days remote - £90,000 We are currently seeking to recruit an Oracle Lead Solution Designer (Finance Planning & Analysis) to join our Technology team in London (with remote working too). The Technology team operates on a global basis and we are looking for a team player to assist in improving and extracting maximum value from our Oracle landscape. This is a great opportunity for an Oracle Lead Solution Designer to play an integral role responsible for defining the overall architecture and design of IT solutions supporting Finance Planning and Analysis business requirements. The successful Oracle Solution Designer will be key in driving the technical direction and strategy for the organisation. The successful candidate will bring external experience and expertise of creating sustainable Oracle solutions, improving service standards, sharing best practice, and engaging with key stakeholders (internal and external) to provide excellent service. A key member of the Back Office transformation team, the Oracle Lead Solution Designer will have the opportunity to work in a global solution delivery environment alongside key technology partners in delivering best of breed solutions to meet US centric and local accounting and financial reporting requirements. Roles and Responsibilities Accountable for the delivery of the chosen Oracle solution(s) through the whole delivery life cycle, working with various IT teams and vendors to manage ideas, through to design, through to delivery and operation of Oracle Solution. Provide solution & design knowledge to advise project teams, business stakeholders and third-party vendors on Oracle options Ensure that all solutions in place are technically sound and optimized for best performance on the Oracle Cloud eco-system Ensure seamless integration and enablement of business self-service on reporting and analytics solutions from financial planning data and information Ensure that all solutions in place adhere to appropriate governance with supporting documentation Work with the wider team to refine the Oracle design roadmap within the Framework defined by Architecture. This will include inputting into cloud adoption and its implementation. Extensive experience of assessing and implementing internal and vendor solutions Mitigate risk and have awareness of emerging threats to security as well as compliance Assurance on integration design patterns and solutions are optimal and service based, leading to re-use and supportability in a BAU environment Ensure that solutions are an appropriate balance between short-term delivery needs and medium/long term strategic aspirations. Assist in the creation and maintenance of Oracle technical roadmaps working with Architects to ensure aligned. Propose the Oracle system improvement ideas for better customer experience Present Oracle solution design to the stakeholders and feedback the comments Involved in all the phases of the solution delivery to guide the teams Conducting regular evaluations of the system architecture and collaborating with the teams to improve the designs Performing continuous research on emerging technologies to stay updated with the best alternatives and to improve the existing architecture Reviewing vendor designs, ensuring alignment to business requirements and supportable without creating unnecessary technical debt Skills/Experience Essential Proven experience in Oracle solution design, roadmaps and delivery Hand on in Oracle Cloud solutions including but not limited to: Accounting Foundation, Accounting Hub, Fusion ERP, EPM (EPBCS, EPCM), Oracle Integration Cloud, Enterprise Data Management Cloud Solutions Strong working knowledge in Oracle Cloud Products including AFCS, AHCS, EPM modules, EDMCS and OIC Previous hands-on experience and end-to-end implementations with Oracle Finance, Reinsurance or Cloud solutions Strong knowledge on analytics solutions that integrate into EPM delivering seamless self-serve capability for business users Understanding key finance planning and forecast data requirements, including processing of allocations and drivers Deep technical knowledge of Oracle Cloud products Should excel in Oracle finance planning and analysis processes Expertise in Oracle upgrades and patching Experience in Oracle migration and transformation Expertise in Sub-ledger to General Ledger actual vs plan integration and analysis Well versed with Oracle Integration to process significant data volumes, and manage hierarchy changes in EDMCS, supporting performance management Good knowledge in System performance improvements Strong knowledge in end to end to end design and integration systems Experience in Non-Oracle product integrations with Oracle Strong communication and presenting skills Experience proposing and implementing technically complex projects Excellent understanding of the project delivery life cycle Experience and knowledge of multiple Oracle products and services in general and how they work together Ability to rapidly pick-up new technologies, propositions and business challenges and translate them into Oracle Solutions and offerings Oracle Certification or relevant certification related to design or delivery Experience using Fusion Analytics and Oracle Analytics Cloud Desirable Accounting qualifications, and/or significant experience in delivering US GAAP and IFRS reporting standards Insurance and/or finance services accounting standards and how they convert to system needs Awareness of the leading industry trends, industry standards and follow regulatory changes Experience using Fusion Analytics and Oracle Analytics Cloud Experience in non-Oracle analytical tools that connect to the Oracle Eco-System Oracle brownfield migration and/or greenfield experience Financial or Reinsurance experience or knowledge Configuration design experience for Oracle systems that are in the cloud Experience working with one of more of the following: SAP BW, SAP S/4, PeopleSoft Good knowledge in Oracle coding language and enhancements Previous experience in cloud products like AWS, Azure Personal Characteristics Collaborates well with all levels within the organization Good Communicator - succinctly communicates vision to all stakeholders in a compelling and effective way Data Driven - values evidence, research and customer feedback Decisive - makes effective customer centric decisions Flexible - adapts and thrives under change and ambiguity in an independent and flat structure Excellent internal customer service and communication skills. Ability to understand and communicate technical language to non-technical audiences Ability to work in a fast-paced environment with multiple priorities Ability to produce accurate work under pressure with frequent deadlines Demonstrate critical thinking and analytical skills with attention to detail Excellent problem-solving skills, with the ability to work independently and collaborating with others Ability to exercise confidentiality and professionalism in the performance of duties Self sufficient with the ability to maintain progress on tasks and projects
27/04/2024
Full time
Oracle Lead Solutions Designer FP&A - Hybrid - 3 days per week onsite in London, 2 days remote - £90,000 We are currently seeking to recruit an Oracle Lead Solution Designer (Finance Planning & Analysis) to join our Technology team in London (with remote working too). The Technology team operates on a global basis and we are looking for a team player to assist in improving and extracting maximum value from our Oracle landscape. This is a great opportunity for an Oracle Lead Solution Designer to play an integral role responsible for defining the overall architecture and design of IT solutions supporting Finance Planning and Analysis business requirements. The successful Oracle Solution Designer will be key in driving the technical direction and strategy for the organisation. The successful candidate will bring external experience and expertise of creating sustainable Oracle solutions, improving service standards, sharing best practice, and engaging with key stakeholders (internal and external) to provide excellent service. A key member of the Back Office transformation team, the Oracle Lead Solution Designer will have the opportunity to work in a global solution delivery environment alongside key technology partners in delivering best of breed solutions to meet US centric and local accounting and financial reporting requirements. Roles and Responsibilities Accountable for the delivery of the chosen Oracle solution(s) through the whole delivery life cycle, working with various IT teams and vendors to manage ideas, through to design, through to delivery and operation of Oracle Solution. Provide solution & design knowledge to advise project teams, business stakeholders and third-party vendors on Oracle options Ensure that all solutions in place are technically sound and optimized for best performance on the Oracle Cloud eco-system Ensure seamless integration and enablement of business self-service on reporting and analytics solutions from financial planning data and information Ensure that all solutions in place adhere to appropriate governance with supporting documentation Work with the wider team to refine the Oracle design roadmap within the Framework defined by Architecture. This will include inputting into cloud adoption and its implementation. Extensive experience of assessing and implementing internal and vendor solutions Mitigate risk and have awareness of emerging threats to security as well as compliance Assurance on integration design patterns and solutions are optimal and service based, leading to re-use and supportability in a BAU environment Ensure that solutions are an appropriate balance between short-term delivery needs and medium/long term strategic aspirations. Assist in the creation and maintenance of Oracle technical roadmaps working with Architects to ensure aligned. Propose the Oracle system improvement ideas for better customer experience Present Oracle solution design to the stakeholders and feedback the comments Involved in all the phases of the solution delivery to guide the teams Conducting regular evaluations of the system architecture and collaborating with the teams to improve the designs Performing continuous research on emerging technologies to stay updated with the best alternatives and to improve the existing architecture Reviewing vendor designs, ensuring alignment to business requirements and supportable without creating unnecessary technical debt Skills/Experience Essential Proven experience in Oracle solution design, roadmaps and delivery Hand on in Oracle Cloud solutions including but not limited to: Accounting Foundation, Accounting Hub, Fusion ERP, EPM (EPBCS, EPCM), Oracle Integration Cloud, Enterprise Data Management Cloud Solutions Strong working knowledge in Oracle Cloud Products including AFCS, AHCS, EPM modules, EDMCS and OIC Previous hands-on experience and end-to-end implementations with Oracle Finance, Reinsurance or Cloud solutions Strong knowledge on analytics solutions that integrate into EPM delivering seamless self-serve capability for business users Understanding key finance planning and forecast data requirements, including processing of allocations and drivers Deep technical knowledge of Oracle Cloud products Should excel in Oracle finance planning and analysis processes Expertise in Oracle upgrades and patching Experience in Oracle migration and transformation Expertise in Sub-ledger to General Ledger actual vs plan integration and analysis Well versed with Oracle Integration to process significant data volumes, and manage hierarchy changes in EDMCS, supporting performance management Good knowledge in System performance improvements Strong knowledge in end to end to end design and integration systems Experience in Non-Oracle product integrations with Oracle Strong communication and presenting skills Experience proposing and implementing technically complex projects Excellent understanding of the project delivery life cycle Experience and knowledge of multiple Oracle products and services in general and how they work together Ability to rapidly pick-up new technologies, propositions and business challenges and translate them into Oracle Solutions and offerings Oracle Certification or relevant certification related to design or delivery Experience using Fusion Analytics and Oracle Analytics Cloud Desirable Accounting qualifications, and/or significant experience in delivering US GAAP and IFRS reporting standards Insurance and/or finance services accounting standards and how they convert to system needs Awareness of the leading industry trends, industry standards and follow regulatory changes Experience using Fusion Analytics and Oracle Analytics Cloud Experience in non-Oracle analytical tools that connect to the Oracle Eco-System Oracle brownfield migration and/or greenfield experience Financial or Reinsurance experience or knowledge Configuration design experience for Oracle systems that are in the cloud Experience working with one of more of the following: SAP BW, SAP S/4, PeopleSoft Good knowledge in Oracle coding language and enhancements Previous experience in cloud products like AWS, Azure Personal Characteristics Collaborates well with all levels within the organization Good Communicator - succinctly communicates vision to all stakeholders in a compelling and effective way Data Driven - values evidence, research and customer feedback Decisive - makes effective customer centric decisions Flexible - adapts and thrives under change and ambiguity in an independent and flat structure Excellent internal customer service and communication skills. Ability to understand and communicate technical language to non-technical audiences Ability to work in a fast-paced environment with multiple priorities Ability to produce accurate work under pressure with frequent deadlines Demonstrate critical thinking and analytical skills with attention to detail Excellent problem-solving skills, with the ability to work independently and collaborating with others Ability to exercise confidentiality and professionalism in the performance of duties Self sufficient with the ability to maintain progress on tasks and projects
Mid-Level Software Engineer (React, JavaScript) 35k-50k I'm working with one of the leading Software Development Agencies in Europe right now who are looking to expand their team with a Mid Level Software Engineer. My client works worldwide with some of the biggest companies in the world to create bespoke software solutions and despite being a Software Development Agency they value work-life balance and quality of work above all else. You will be joining a modern and flexible company of 25+ and working with a development team of 4 Senior Developers whilst also working across other development teams within the company when needed as well as Designers, Product Managers etc. You will be working on one of their biggest projects, creating new all in one portal for one of the largest telecoms businesses in the UK. They truly foster an environment of progression and self-improvement and there is tons of room for growth here. The Mid Level Full Stack Developer will ideally have the following technical skills: Good knowledge of JavaScript including Vanilla JavaScript ES6+ Good knowledge of React. Redux Next.Js React Native TypeScript £35,000-£50,000 DOE The role is remote with a meet-up in London once a month. 25 Days Holiday plus 10 bank holidays (extra day as they have an Irish office) Paid Parental Leave. Private Health Insurance. Flexible working hours to suit how you want to work. Bi annual fully paid for company retreats!
26/04/2024
Full time
Mid-Level Software Engineer (React, JavaScript) 35k-50k I'm working with one of the leading Software Development Agencies in Europe right now who are looking to expand their team with a Mid Level Software Engineer. My client works worldwide with some of the biggest companies in the world to create bespoke software solutions and despite being a Software Development Agency they value work-life balance and quality of work above all else. You will be joining a modern and flexible company of 25+ and working with a development team of 4 Senior Developers whilst also working across other development teams within the company when needed as well as Designers, Product Managers etc. You will be working on one of their biggest projects, creating new all in one portal for one of the largest telecoms businesses in the UK. They truly foster an environment of progression and self-improvement and there is tons of room for growth here. The Mid Level Full Stack Developer will ideally have the following technical skills: Good knowledge of JavaScript including Vanilla JavaScript ES6+ Good knowledge of React. Redux Next.Js React Native TypeScript £35,000-£50,000 DOE The role is remote with a meet-up in London once a month. 25 Days Holiday plus 10 bank holidays (extra day as they have an Irish office) Paid Parental Leave. Private Health Insurance. Flexible working hours to suit how you want to work. Bi annual fully paid for company retreats!
Lead Software Engineer (Back End) Fully remote Salary up to £80,000 + Huge pension An exciting opportunity has arisen to join a well known organisation in the public sector, famed for it's culture and work/life balance.The new Lead Software Engineer will work across the whole of the Digital and Innovation portfolio, supporting activity across core IT and technology, customer and digital. Key responsibilities will include: Implement software development standards and practice for the organisation Build and maintain CI/CD processes using GitHub Actions Ensure requirements are correctly captured via user stories and gherkin acceptance criteria, using Jira to manage workflow Ensure that all software you build, maintain and run meets user needs. Lead and develop a team of 6 direct reports Develop new services, working in multidisciplinary product teams. Prototype code in the early stages of development, pairing with designers and researchers. Continuously release code throughout the product life cycle. Conduct reviews of user stories and code, as well as taking part in reviews of your work and leading reviews of your teammates' work Work in agile ways within multidisciplinary teams; take user stories from writing to production; bake quality assurance into every story; take an active approach to working down technical debt Skills Required: Expertise in Dynamics 365 CRM (CS Module) Azure C#/.NET Experience in Lead position. Excellent Stakeholder management skills This opportunity represents the chance to work on an exciting project and make a difference. If you are interested, please apply for full details.
26/04/2024
Full time
Lead Software Engineer (Back End) Fully remote Salary up to £80,000 + Huge pension An exciting opportunity has arisen to join a well known organisation in the public sector, famed for it's culture and work/life balance.The new Lead Software Engineer will work across the whole of the Digital and Innovation portfolio, supporting activity across core IT and technology, customer and digital. Key responsibilities will include: Implement software development standards and practice for the organisation Build and maintain CI/CD processes using GitHub Actions Ensure requirements are correctly captured via user stories and gherkin acceptance criteria, using Jira to manage workflow Ensure that all software you build, maintain and run meets user needs. Lead and develop a team of 6 direct reports Develop new services, working in multidisciplinary product teams. Prototype code in the early stages of development, pairing with designers and researchers. Continuously release code throughout the product life cycle. Conduct reviews of user stories and code, as well as taking part in reviews of your work and leading reviews of your teammates' work Work in agile ways within multidisciplinary teams; take user stories from writing to production; bake quality assurance into every story; take an active approach to working down technical debt Skills Required: Expertise in Dynamics 365 CRM (CS Module) Azure C#/.NET Experience in Lead position. Excellent Stakeholder management skills This opportunity represents the chance to work on an exciting project and make a difference. If you are interested, please apply for full details.
UX/UI Designer Staffordshire - Hybrid- Min. once per month on site Salary up to £40,000 + benefits I am representing a leading provider of fleet management software, developing innovative solutions and services for many businesses. In this UI/UX Developer role, you will work closely alongside a Product Manager to ensure outstanding UX and UI on a number of applications, including a mobile technician app, as well as playing a crucial role in the future of UI/UX in the organisation. This UX/UI Designer opportunity will allow you to create and shape numerous visual designs and deliver the best user experience for the business and it's clients. Key Responsibilities of the UX/UI Designer: Design of new products and features to be added to the range of software products Translate concepts into wireframes and prototypes using specialist tools Establish processes for the development of a UI/UX function Suggest changes to already existing products with the aim of improving user experience Key Requirements: Ideally 2-3 years of experience in a UI/UX designer role Strong problem solving skills and customer focused Understanding of Usability factors, Balsamiq and WinForms is beneficial Excellent written and verbal communication Happy to be part of a very small team, shaping the future of UI and UX within the organisation This is an opportunity to join a creative organisation playing a new and pivotal UI/UX Designer role, contributing to the future success of the company as they adopt a more product-led and Agile way of working. If this sounds like the right move for you, please apply and I will get in touch. This role is based out of an office in Staffordshire - you will need to attend a minimum of once per month, but you can go in more if you'd like!
25/04/2024
Full time
UX/UI Designer Staffordshire - Hybrid- Min. once per month on site Salary up to £40,000 + benefits I am representing a leading provider of fleet management software, developing innovative solutions and services for many businesses. In this UI/UX Developer role, you will work closely alongside a Product Manager to ensure outstanding UX and UI on a number of applications, including a mobile technician app, as well as playing a crucial role in the future of UI/UX in the organisation. This UX/UI Designer opportunity will allow you to create and shape numerous visual designs and deliver the best user experience for the business and it's clients. Key Responsibilities of the UX/UI Designer: Design of new products and features to be added to the range of software products Translate concepts into wireframes and prototypes using specialist tools Establish processes for the development of a UI/UX function Suggest changes to already existing products with the aim of improving user experience Key Requirements: Ideally 2-3 years of experience in a UI/UX designer role Strong problem solving skills and customer focused Understanding of Usability factors, Balsamiq and WinForms is beneficial Excellent written and verbal communication Happy to be part of a very small team, shaping the future of UI and UX within the organisation This is an opportunity to join a creative organisation playing a new and pivotal UI/UX Designer role, contributing to the future success of the company as they adopt a more product-led and Agile way of working. If this sounds like the right move for you, please apply and I will get in touch. This role is based out of an office in Staffordshire - you will need to attend a minimum of once per month, but you can go in more if you'd like!
Position Overview: We are seeking a talented Senior Angular Developer to join our team and drive the development of robust, scalable, and user-friendly web applications within the banking domain. As a Senior Angular Developer, you will collaborate closely with cross-functional teams to design, develop, and maintain responsive Front End applications that enhance the digital banking experience for our customers. Responsibilities: Lead the development of highly interactive and dynamic user interfaces using Angular framework. Collaborate with UX/UI designers and Back End developers to implement seamless integration of Front End components with Server Side logic. Optimize application performance and ensure responsiveness across various devices and browsers. Conduct code reviews, provide constructive feedback, and mentor junior developers to maintain high code quality standards. Stay updated with the latest trends and best practices in Angular development and recommend innovative solutions to enhance product functionality. Work closely with stakeholders to understand business requirements and translate them into technical specifications. Requirements: Bachelor's degree in Computer Science, Engineering, or a related field. Proven experience as a Senior Angular Developer or similar role, with at least 6 years of hands-on experience in Angular development. Extensive knowledge of HTML5, CSS3, and JavaScript, along with proficiency in TypeScript. Strong understanding of Angular architecture, components, modules, and services. Experience with RESTful APIs and asynchronous programming. Familiarity with version control systems such as Git. Excellent problem-solving skills and ability to troubleshoot complex issues independently. Prior experience in the banking or financial services industry is a plus. Project Details: Locatie: Utrecht Type: Freelance/Payroll Work: Hybrid Industry: Banking Michael Bailey International is acting as an Employment Business in relation to this vacancy.
24/04/2024
Project-based
Position Overview: We are seeking a talented Senior Angular Developer to join our team and drive the development of robust, scalable, and user-friendly web applications within the banking domain. As a Senior Angular Developer, you will collaborate closely with cross-functional teams to design, develop, and maintain responsive Front End applications that enhance the digital banking experience for our customers. Responsibilities: Lead the development of highly interactive and dynamic user interfaces using Angular framework. Collaborate with UX/UI designers and Back End developers to implement seamless integration of Front End components with Server Side logic. Optimize application performance and ensure responsiveness across various devices and browsers. Conduct code reviews, provide constructive feedback, and mentor junior developers to maintain high code quality standards. Stay updated with the latest trends and best practices in Angular development and recommend innovative solutions to enhance product functionality. Work closely with stakeholders to understand business requirements and translate them into technical specifications. Requirements: Bachelor's degree in Computer Science, Engineering, or a related field. Proven experience as a Senior Angular Developer or similar role, with at least 6 years of hands-on experience in Angular development. Extensive knowledge of HTML5, CSS3, and JavaScript, along with proficiency in TypeScript. Strong understanding of Angular architecture, components, modules, and services. Experience with RESTful APIs and asynchronous programming. Familiarity with version control systems such as Git. Excellent problem-solving skills and ability to troubleshoot complex issues independently. Prior experience in the banking or financial services industry is a plus. Project Details: Locatie: Utrecht Type: Freelance/Payroll Work: Hybrid Industry: Banking Michael Bailey International is acting as an Employment Business in relation to this vacancy.
Content Development for Tool and Process Adoption (Create a variety of content types (articles, infographics, etc.) to support the rollout of new tools and processes; develop clear and concise materials that facilitate the understanding and adoption of new systems). Awareness Campaigns (Design and execute awareness campaigns to highlight the benefits and features of new tools and processes; Craft engaging messages to promote understanding and enthusiasm for upcoming changes within the organization). Thought Leadership Content (Produce thought leadership pieces that position Digital & IT related to the programs as a forward-thinking organization in the adoption of innovative tools and processes; Interview internal experts and leaders to create content that showcases insights and best practices). Educational and Training Collaboration (Use storytelling and case studies to illustrate the practical application and advantages of new implementations). Multimedia Content Production (Work closely with motion graphic designers creating appealing content in various formats). Internal Platforms Management (Manage and update content on internal social media platforms, Intranet, and other communication channels to keep employees informed (SharePoint, Viva Engage, etc); Monitor engagement and feedback on internal channels to refine content strategy). Feedback Collection and Analysis (Gather feedback from employees on the effectiveness of content and its impact on tool and process adoption; Analyze content performance metrics to identify areas for improvement and to measure success). Collaboration with Cross-Functional Teams (Work closely with stakeholders locally, globally to ensure content alignment with information and company policies; Participate in cross-functional meetings to stay updated on new tools and processes and to synchronize content creation efforts). Content Calendar and Project Management (Develop and maintain a content calendar to ensure timely delivery of materials in line with implementation schedules; Manage content projects from ideation to publication, ensuring deadlines are met and content quality standards are maintained). Branding and Messaging Consistency (Ensure all content is consistent with the company's brand voice, style, and messaging guidelines). Crisis Communication Support (Assist in developing communication plans and content for crisis management related to the implementation of new tools and processes; Be prepared to quickly produce reactive content to address concerns or issues that may arise during the implementation phase). Requirements: Experience in similar position, Fluent English language; very good technical skills (Microsoft Office and other tools - SharePoint, Viva Engage, e-mail groups), public speaking, writing skills, independance, motivation, reliability, able to resolve conflicts Texts for newsletters, posts, articles on One CRM level in different information depth and stages (leadership to end user/from awareness up to thought leadership) Ghost writing texts for communication on segment/regional level SharePoint administration: upgrading and updating existing pages, creating subpages, regular updates FAQs update Townhall support (invites, minutes, communication after) Full time - 40 hours per week
24/04/2024
Project-based
Content Development for Tool and Process Adoption (Create a variety of content types (articles, infographics, etc.) to support the rollout of new tools and processes; develop clear and concise materials that facilitate the understanding and adoption of new systems). Awareness Campaigns (Design and execute awareness campaigns to highlight the benefits and features of new tools and processes; Craft engaging messages to promote understanding and enthusiasm for upcoming changes within the organization). Thought Leadership Content (Produce thought leadership pieces that position Digital & IT related to the programs as a forward-thinking organization in the adoption of innovative tools and processes; Interview internal experts and leaders to create content that showcases insights and best practices). Educational and Training Collaboration (Use storytelling and case studies to illustrate the practical application and advantages of new implementations). Multimedia Content Production (Work closely with motion graphic designers creating appealing content in various formats). Internal Platforms Management (Manage and update content on internal social media platforms, Intranet, and other communication channels to keep employees informed (SharePoint, Viva Engage, etc); Monitor engagement and feedback on internal channels to refine content strategy). Feedback Collection and Analysis (Gather feedback from employees on the effectiveness of content and its impact on tool and process adoption; Analyze content performance metrics to identify areas for improvement and to measure success). Collaboration with Cross-Functional Teams (Work closely with stakeholders locally, globally to ensure content alignment with information and company policies; Participate in cross-functional meetings to stay updated on new tools and processes and to synchronize content creation efforts). Content Calendar and Project Management (Develop and maintain a content calendar to ensure timely delivery of materials in line with implementation schedules; Manage content projects from ideation to publication, ensuring deadlines are met and content quality standards are maintained). Branding and Messaging Consistency (Ensure all content is consistent with the company's brand voice, style, and messaging guidelines). Crisis Communication Support (Assist in developing communication plans and content for crisis management related to the implementation of new tools and processes; Be prepared to quickly produce reactive content to address concerns or issues that may arise during the implementation phase). Requirements: Experience in similar position, Fluent English language; very good technical skills (Microsoft Office and other tools - SharePoint, Viva Engage, e-mail groups), public speaking, writing skills, independance, motivation, reliability, able to resolve conflicts Texts for newsletters, posts, articles on One CRM level in different information depth and stages (leadership to end user/from awareness up to thought leadership) Ghost writing texts for communication on segment/regional level SharePoint administration: upgrading and updating existing pages, creating subpages, regular updates FAQs update Townhall support (invites, minutes, communication after) Full time - 40 hours per week
Job purpose The technical development lead will guide the continuous development of Vits 's technology in a collaborative, effective and Agile manner leading a multidisciplinary technology team. High-quality software will be delivered using best-of-breed frameworks, such as Laravel, and components to support the requirements of a growing business. Key areas of responsibility collaborating openly and autonomously within a non-siloed, organic business structure leading, coaching and growing a technology team of developers, UI and UX designers to deliver effective software within an Agile environment working with product owners and project managers to establish formal requirements, produce technical specifications and deliver software to an agreed plan identifying appropriate software architecture, approaches, frameworks and components to implement the business requirements safe-guarding the stability, effectiveness and continuity of software development maintaining and managing technical debt, security and compliance of in-house software overseeing Vits 's hardware resources, in collaboration with the IT support partner The role requires experience of implementing software systems which leverage third-party APIs expertise in the traditional PHP stack (PHP/MySQL/HTML/CSS/JavaScript) in modern frameworks such as Laravel or Symphony implementing and working within service-oriented architectures and associated principles and standards, eg SOLID good understanding of test approaches (eg unit versus integration) a pragmatist who can achieve a balance between the creative approach of a developer and the needs of the business The person will be careful, organised and diligent - even meticulous - with a good dose of common sense demanding of high standards, and at ease with demanding people effective - but also efficient - in both the physical and digital realms modestly confident, good-humoured and trustworthy at home in the worlds of art, architecture, craft and design informal but 100% professional, while respecting traditional courtesy and good manners
24/04/2024
Full time
Job purpose The technical development lead will guide the continuous development of Vits 's technology in a collaborative, effective and Agile manner leading a multidisciplinary technology team. High-quality software will be delivered using best-of-breed frameworks, such as Laravel, and components to support the requirements of a growing business. Key areas of responsibility collaborating openly and autonomously within a non-siloed, organic business structure leading, coaching and growing a technology team of developers, UI and UX designers to deliver effective software within an Agile environment working with product owners and project managers to establish formal requirements, produce technical specifications and deliver software to an agreed plan identifying appropriate software architecture, approaches, frameworks and components to implement the business requirements safe-guarding the stability, effectiveness and continuity of software development maintaining and managing technical debt, security and compliance of in-house software overseeing Vits 's hardware resources, in collaboration with the IT support partner The role requires experience of implementing software systems which leverage third-party APIs expertise in the traditional PHP stack (PHP/MySQL/HTML/CSS/JavaScript) in modern frameworks such as Laravel or Symphony implementing and working within service-oriented architectures and associated principles and standards, eg SOLID good understanding of test approaches (eg unit versus integration) a pragmatist who can achieve a balance between the creative approach of a developer and the needs of the business The person will be careful, organised and diligent - even meticulous - with a good dose of common sense demanding of high standards, and at ease with demanding people effective - but also efficient - in both the physical and digital realms modestly confident, good-humoured and trustworthy at home in the worlds of art, architecture, craft and design informal but 100% professional, while respecting traditional courtesy and good manners