AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
06/05/2024
Project-based
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
Position Available : RF Systems Engineer Location : Bristol - Dynamic Working Hours Salary : Up to £63,000 + Paid Overtime, Company Bonus & Very Good Pension Package Experience needed : Experience in RF, DSP, Antenna & Modelling and experience being involved with the full product life cycle from research and concept development to system design, integration, verification and validation. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Supplier Development Manager to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Designing and developing RF systems Participating in, or leading design reviews across the product life cycle. Coordinating the transition of development hardware into production, including environmental testing, qualification testing and design certification. System level functionality proving, Software/Firmware integration and proving. What we need from you: RF/Microwave systems knowledge Understanding of waveform design and implementation Requirements management and systems design Technical leadership of junior engineers System level RF modelling Antenna design and/or EM modelling Familiarity of Real Time Digital Signal Processing for high data bandwidth systems Systems modelling and Autocode generation experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
03/05/2024
Full time
Position Available : RF Systems Engineer Location : Bristol - Dynamic Working Hours Salary : Up to £63,000 + Paid Overtime, Company Bonus & Very Good Pension Package Experience needed : Experience in RF, DSP, Antenna & Modelling and experience being involved with the full product life cycle from research and concept development to system design, integration, verification and validation. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Supplier Development Manager to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Designing and developing RF systems Participating in, or leading design reviews across the product life cycle. Coordinating the transition of development hardware into production, including environmental testing, qualification testing and design certification. System level functionality proving, Software/Firmware integration and proving. What we need from you: RF/Microwave systems knowledge Understanding of waveform design and implementation Requirements management and systems design Technical leadership of junior engineers System level RF modelling Antenna design and/or EM modelling Familiarity of Real Time Digital Signal Processing for high data bandwidth systems Systems modelling and Autocode generation experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
ARM (Advanced Resource Managers)
Corsham, Wiltshire
Lead Mechanical Engineer (Assembly, Integration & Testing) Corsham 12-month contract Paying up to £45p/h (Umbrella) ARM have partnered with an Aerospace client who are looking for an experienced AIT engineer to work out of their manufacturing site based in Corsham. As the AIT Lead Engineer, you'll be responsible for leading the Mechanical team and ensuring all engineering concepts are delivered to the shop floor. Responsibilities: * Leading a team of AIT engineers on specific projects as well as planning the mechanical team's activities on a weekly basis. * Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A - E' * Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures, and test reports. * Control of all project MGSE, flight & support equipment * Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. * Alignment - producing test procedures and operating and maintaining optical alignment equipment. * Designing test equipment, overseeing its manufacture, and commissioning * Mechanical handling of spacecraft, instruments, payloads, solar arrays, antennas etc * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Install and validate test instrumentation. * Support propulsion testing * Handling and installation of thermal hardware * Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation associated with performing these tasks. * Pyrotechnic handling, installation, and safety * Plan and control the workload of the AIT team consisting of engineers and technicians. * Be able to travel overseas to work for short periods (typically 2-3 months, could be 6-7 months on occasions) * Be able to integrate quickly and easily into an AIT team. Experience required: * Appreciation of satellite integration processes and project phases * Use of SAP or other ERP System * Understanding of build documentation and the need for it * Driving build quality through review of processes and implementation of improvements * Managing a team during day-to-day activities ensuring work is completed on time and the correct standard. * Controlling and delivery of projects to budget and schedule * Face-to-face dealings with customers and suppliers * Worked in volatile, high-pressure environments to resolve technical and personnel conflicts. * Spacecraft Mechanical testing on prime projects is essential. * Leading other team members * Production of MGSE specs and operation of MGSE and flight HW * Production of high-quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
03/05/2024
Project-based
Lead Mechanical Engineer (Assembly, Integration & Testing) Corsham 12-month contract Paying up to £45p/h (Umbrella) ARM have partnered with an Aerospace client who are looking for an experienced AIT engineer to work out of their manufacturing site based in Corsham. As the AIT Lead Engineer, you'll be responsible for leading the Mechanical team and ensuring all engineering concepts are delivered to the shop floor. Responsibilities: * Leading a team of AIT engineers on specific projects as well as planning the mechanical team's activities on a weekly basis. * Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A - E' * Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures, and test reports. * Control of all project MGSE, flight & support equipment * Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. * Alignment - producing test procedures and operating and maintaining optical alignment equipment. * Designing test equipment, overseeing its manufacture, and commissioning * Mechanical handling of spacecraft, instruments, payloads, solar arrays, antennas etc * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Install and validate test instrumentation. * Support propulsion testing * Handling and installation of thermal hardware * Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation associated with performing these tasks. * Pyrotechnic handling, installation, and safety * Plan and control the workload of the AIT team consisting of engineers and technicians. * Be able to travel overseas to work for short periods (typically 2-3 months, could be 6-7 months on occasions) * Be able to integrate quickly and easily into an AIT team. Experience required: * Appreciation of satellite integration processes and project phases * Use of SAP or other ERP System * Understanding of build documentation and the need for it * Driving build quality through review of processes and implementation of improvements * Managing a team during day-to-day activities ensuring work is completed on time and the correct standard. * Controlling and delivery of projects to budget and schedule * Face-to-face dealings with customers and suppliers * Worked in volatile, high-pressure environments to resolve technical and personnel conflicts. * Spacecraft Mechanical testing on prime projects is essential. * Leading other team members * Production of MGSE specs and operation of MGSE and flight HW * Production of high-quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
JOB: Working across an Assets and Connections Portfolio, the successful candidate will be responsible for producing and assuring high quality electrical and circuit designs to an agreed scope. Designs to be delivered to cost, time and quality targets. All designs must meet design and CDM standards. These designs could be for APP and/or Connections (non-contestable and contestable) work. The successful candidate will be expected to work as part of a multi-disciplinary team, delivering design technical excellence by ensuring compliance to design, CDM and relevant standards for the regulated network solutions for all APP and Connection schemes. ACCOUNTABILITIES: Production of Electrical Designs and circuit designs (below ground and in air) that can be constructed in compliance with standards and CDM requirements with no supervision and assure others designs. Deliver effective designs, which conform to all relevant Codes of Practice and company and industry standards, in conjunction with Electrical Design. Contribute to the production of technical, commercial and contractual documents for procurement of engineering products. Ensure compliance with all relevant legislation, regulations, and company procedures. Compliance with design assurance and audit processes Preparation of concept and developed design, from specifications and drawings within defined periods. Provide an excellent service to the customer. Work as a Team Player within larger multi-disciplinary teams. Liaise with the operational teams to ensure a smooth process from initial enquiry through to final energisation and project closure. Complying with the requirements of the designer/principal designer as determined by the 2015 CDM Regulations. Ensure design eliminates any hazards which may give rise to risks; and reduce risks from any remaining hazards (in conjunction with CDM). Ensure solutions provide sufficient information about aspects of the design of the network, its construction and maintenance as will adequately assist clients, the CDM team, other designers, and contractors. Supporting and mentoring other members of the team to enhance their technical knowledge and experience. SKILLS, QUALIFICATIONS AND EXPERIENCE: Strong Electrical engineering background and experience in electrical engineering. Knowledge of power system and protection design at 132KV, 33KV, 11KV, and intermediate voltages. Electrical/Circuit Engineering degree or STEM equivalent with proven relevant Electrical/Cable/OHL and substation design experience. Circuit engineering background and extensive experience in EHV circuit design and construction works, ideally within Utility sector. Competence in resolving circuit network issues and ability to provide a sound understanding of company standards and policies and their application to this role. Awareness of current and technological developments in circuit engineering. Extensive Knowledge of design processes and relevant DNO, ENA and International Design Standards including relevant operational aspects to successfully deliver designs. Ability to work with external engineering organisations and customers/stakeholders representing UKPN to best effect. Capable to sign off the designs. A good safety culture and sound understanding of Construction Design and Management (CDM) Regulations and their application in this role. Ability to work unsupervised, set and comply with own targets, and identify and implement innovative cost saving solutions. Good team working skills. A good level of business, environmental, safety, financial, and regulatory awareness. A general appreciation of financial reporting systems. Knowledge of the ISO 9001:2000 and ISO 14001 procedures relevant to the team's activities. Manage (not line manage) and communicate with the CAD team to produce design drawings suitable for construction. Experience of undertaking cable sizing/rating calculations for 11kV up to 132kV networks, for both solidly and cross bonded circuits (including de-rating aspects and short circuit loadings). Experience of undertaking cable pulling calculations for 11kV up to 132kV networks, in line with company standards. Experience in designing joint/pulling bays from 11kV up to 132kV. Experience in designing pilot/fibre cable routes, including splice chambers. Experience in terminations to indoor/outdoor switchgear/cable sealing ends. Experience in route proving, to determine the most cost effective and safest route install. Experience of directional drills and ability to advise/assure requirements accordingly. Excellent communication and organizational skills required, especially in relation to dealing with survey companies to obtain utility search information. Experience with producing Bills of Materials, particularly cable drum lengths, in coordination with pulling calculations. Liaise with Wayleaves and Consents to determine most feasible route. Knowledge of project management. Proficient in the use of Microsoft desktop applications, in particular: Word, Excel, and PowerPoint. Strong interpersonal skills and be competent in written and oral communications. Proficient in the use of AutoCAD and or Micro station. Awareness of current and technological developments in distribution plant and equipment. Input into innovative construction ideas and techniques, which feed into UK Power Networks Green Action Plan. Chartered Engineer or working towards achieving Chartership. PACKAGE: £70,000 - £78,132 - + car + London Allowance + bonus + benefit Annual Leave Personal Pension Plan - Personal contribution rates of 4% or 5% (UK Power Networks will make a corresponding contribution of 8% or 10%) Tenancy Loan Deposit scheme Tax efficient benefits: cycle to work scheme Season ticket loan Occupational Health support Switched On - scheme providing discount on hundreds of retailers products. Discounted access to sports and social clubs Employee Assistance Programme
03/05/2024
Full time
JOB: Working across an Assets and Connections Portfolio, the successful candidate will be responsible for producing and assuring high quality electrical and circuit designs to an agreed scope. Designs to be delivered to cost, time and quality targets. All designs must meet design and CDM standards. These designs could be for APP and/or Connections (non-contestable and contestable) work. The successful candidate will be expected to work as part of a multi-disciplinary team, delivering design technical excellence by ensuring compliance to design, CDM and relevant standards for the regulated network solutions for all APP and Connection schemes. ACCOUNTABILITIES: Production of Electrical Designs and circuit designs (below ground and in air) that can be constructed in compliance with standards and CDM requirements with no supervision and assure others designs. Deliver effective designs, which conform to all relevant Codes of Practice and company and industry standards, in conjunction with Electrical Design. Contribute to the production of technical, commercial and contractual documents for procurement of engineering products. Ensure compliance with all relevant legislation, regulations, and company procedures. Compliance with design assurance and audit processes Preparation of concept and developed design, from specifications and drawings within defined periods. Provide an excellent service to the customer. Work as a Team Player within larger multi-disciplinary teams. Liaise with the operational teams to ensure a smooth process from initial enquiry through to final energisation and project closure. Complying with the requirements of the designer/principal designer as determined by the 2015 CDM Regulations. Ensure design eliminates any hazards which may give rise to risks; and reduce risks from any remaining hazards (in conjunction with CDM). Ensure solutions provide sufficient information about aspects of the design of the network, its construction and maintenance as will adequately assist clients, the CDM team, other designers, and contractors. Supporting and mentoring other members of the team to enhance their technical knowledge and experience. SKILLS, QUALIFICATIONS AND EXPERIENCE: Strong Electrical engineering background and experience in electrical engineering. Knowledge of power system and protection design at 132KV, 33KV, 11KV, and intermediate voltages. Electrical/Circuit Engineering degree or STEM equivalent with proven relevant Electrical/Cable/OHL and substation design experience. Circuit engineering background and extensive experience in EHV circuit design and construction works, ideally within Utility sector. Competence in resolving circuit network issues and ability to provide a sound understanding of company standards and policies and their application to this role. Awareness of current and technological developments in circuit engineering. Extensive Knowledge of design processes and relevant DNO, ENA and International Design Standards including relevant operational aspects to successfully deliver designs. Ability to work with external engineering organisations and customers/stakeholders representing UKPN to best effect. Capable to sign off the designs. A good safety culture and sound understanding of Construction Design and Management (CDM) Regulations and their application in this role. Ability to work unsupervised, set and comply with own targets, and identify and implement innovative cost saving solutions. Good team working skills. A good level of business, environmental, safety, financial, and regulatory awareness. A general appreciation of financial reporting systems. Knowledge of the ISO 9001:2000 and ISO 14001 procedures relevant to the team's activities. Manage (not line manage) and communicate with the CAD team to produce design drawings suitable for construction. Experience of undertaking cable sizing/rating calculations for 11kV up to 132kV networks, for both solidly and cross bonded circuits (including de-rating aspects and short circuit loadings). Experience of undertaking cable pulling calculations for 11kV up to 132kV networks, in line with company standards. Experience in designing joint/pulling bays from 11kV up to 132kV. Experience in designing pilot/fibre cable routes, including splice chambers. Experience in terminations to indoor/outdoor switchgear/cable sealing ends. Experience in route proving, to determine the most cost effective and safest route install. Experience of directional drills and ability to advise/assure requirements accordingly. Excellent communication and organizational skills required, especially in relation to dealing with survey companies to obtain utility search information. Experience with producing Bills of Materials, particularly cable drum lengths, in coordination with pulling calculations. Liaise with Wayleaves and Consents to determine most feasible route. Knowledge of project management. Proficient in the use of Microsoft desktop applications, in particular: Word, Excel, and PowerPoint. Strong interpersonal skills and be competent in written and oral communications. Proficient in the use of AutoCAD and or Micro station. Awareness of current and technological developments in distribution plant and equipment. Input into innovative construction ideas and techniques, which feed into UK Power Networks Green Action Plan. Chartered Engineer or working towards achieving Chartership. PACKAGE: £70,000 - £78,132 - + car + London Allowance + bonus + benefit Annual Leave Personal Pension Plan - Personal contribution rates of 4% or 5% (UK Power Networks will make a corresponding contribution of 8% or 10%) Tenancy Loan Deposit scheme Tax efficient benefits: cycle to work scheme Season ticket loan Occupational Health support Switched On - scheme providing discount on hundreds of retailers products. Discounted access to sports and social clubs Employee Assistance Programme
Your new company Since 1987, our clients 68,000 employees have been maintaining companies globally. They are the UK's leading facilities management and professional services company, and our clients range from household names in banking, to critical government sites as well as hospitals and schools. Your new role Responsibilities: Drive continuous improvement in health, safety, and environmental practices.Oversee and enhance safety programs, policies, and procedures. Collaborate with project/engineering teams to minimise occupational risk. Ensure compliance with health and safety regulations. Lead quality assurance and control processes. Motivate and manage a diverse team of professionals. What you'll need to succeed For this role we are looking for candidates from the following sectors: nuclear, pharmaceutical, mechanical, food, engineering. Furthermore, the qualification needed on this role is the NEBOSH. Training will be provided. However, knowledge of Hard Services would be ideal. What you'll get in return Training and upskilling opportunities Internal promotion opportunities Pension scheme Holidays Cycle to work scheme Employee shares scheme Vehicle provided What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. Hays Talent Solutions is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.
02/05/2024
Full time
Your new company Since 1987, our clients 68,000 employees have been maintaining companies globally. They are the UK's leading facilities management and professional services company, and our clients range from household names in banking, to critical government sites as well as hospitals and schools. Your new role Responsibilities: Drive continuous improvement in health, safety, and environmental practices.Oversee and enhance safety programs, policies, and procedures. Collaborate with project/engineering teams to minimise occupational risk. Ensure compliance with health and safety regulations. Lead quality assurance and control processes. Motivate and manage a diverse team of professionals. What you'll need to succeed For this role we are looking for candidates from the following sectors: nuclear, pharmaceutical, mechanical, food, engineering. Furthermore, the qualification needed on this role is the NEBOSH. Training will be provided. However, knowledge of Hard Services would be ideal. What you'll get in return Training and upskilling opportunities Internal promotion opportunities Pension scheme Holidays Cycle to work scheme Employee shares scheme Vehicle provided What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. Hays Talent Solutions is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.
Job description Coating Technician, Full-Time on-site in Leicestershire. Up to 29K (plus Shift Allowance) (Shift Pattern: 06.00 - 14.00/14.00 - 22.00 - Monday - Friday). Possible weekend requirement. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Mission: To assist the coating department by using optical technological knowledge to help with production requirements to meet on-time-delivery requirements. Yield expectations. To stay competitive within the current market and to assist in new product development.To make recommendations for continuous process improvements and may instigate relevant development activity. Key Responsibilities Ability to measure and assess work on the appropriate spectrophotometers. Ability to identify potential coating problems in process and take appropriate corrective action. Ability to identify coating defects such as spatter, striae, delamination, lint marks, comet marks etc. and understand the possible causes and know the type of action to take to avoid their occurrence. Possesses a thorough understanding of relevant Surface Quality Specifications and how the above relates to them. Examine work prior to coating and be satisfied it is fit to coat. Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. Capable of stripping optics safely, observing Local Health and Safety rules. Identify potential problems with the coating plant/measuring equipment and alert the appropriate support staff. Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002. Competent to train colleagues on various aspects of the coating department. Education, Skills Abilities: Qualifications in Mathematics and Physics at least to GCSE or A l evel Computer literacy, including familiarity with Excel and Word The ability to analyse situations and results A good understanding of optical manufacture A good engineering background SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
02/05/2024
Full time
Job description Coating Technician, Full-Time on-site in Leicestershire. Up to 29K (plus Shift Allowance) (Shift Pattern: 06.00 - 14.00/14.00 - 22.00 - Monday - Friday). Possible weekend requirement. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Mission: To assist the coating department by using optical technological knowledge to help with production requirements to meet on-time-delivery requirements. Yield expectations. To stay competitive within the current market and to assist in new product development.To make recommendations for continuous process improvements and may instigate relevant development activity. Key Responsibilities Ability to measure and assess work on the appropriate spectrophotometers. Ability to identify potential coating problems in process and take appropriate corrective action. Ability to identify coating defects such as spatter, striae, delamination, lint marks, comet marks etc. and understand the possible causes and know the type of action to take to avoid their occurrence. Possesses a thorough understanding of relevant Surface Quality Specifications and how the above relates to them. Examine work prior to coating and be satisfied it is fit to coat. Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. Capable of stripping optics safely, observing Local Health and Safety rules. Identify potential problems with the coating plant/measuring equipment and alert the appropriate support staff. Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002. Competent to train colleagues on various aspects of the coating department. Education, Skills Abilities: Qualifications in Mathematics and Physics at least to GCSE or A l evel Computer literacy, including familiarity with Excel and Word The ability to analyse situations and results A good understanding of optical manufacture A good engineering background SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
People Source Consulting Ltd
Warwick, Warwickshire
Role: Mechanical Engineer Location: Warwick + Hybrid working Salary: £40,000 - £60,000 (depending on experience and ability) The Role Power electronics requires collaborative working between electronics engineering and mechanical engineering to ensure thermal management, production feasibility, durability, and service life. As a Mechanical Engineer, reporting to the Mechanical Engineering Team Leader, you will take responsibility for the technical delivery of one or more projects and ensure that the tasks assigned to you are completed in a timely and conscientious fashion. Continued close communication with the relevant project leads is required. You will produce SolidWorks CAD models and associated drawings of complex cooling structures with an eye to manufacturability and cost effectiveness at all times. To assess the effectiveness of these designs you will be required to conduct mechanical and thermal analysis. You will have the opportunity to integrate your own methods and ideas in order to deliver the company's technical innovations. Responsibilities Simulate, Model, and Validate Cooling Structures: Conduct detailed simulations and modelling to design cooling structures that efficiently extract heat from power electronics devices. Validate these designs through rigorous testing, considering both liquid and air cooling methods SolidWorks CAD Design and Prototyping: Utilize SolidWorks to create innovative and efficient CAD designs. Develop associated drawings and guide designs from prototype build to volume manufacturing Sealing System Design and Testing: Design and rigorously test sealing systems for optimal environmental performance on housing component Advanced Manufacturing Processes: Spearhead the development of industry-leading manufacturing processes for machined, sheet metal, and polymer parts Mechanical-Electronics Integration: Specify mechanical connections and interfaces for seamless integration with electronic components. Collaborate with electronics engineers to optimize package size and functionality PCB Component Layout and Durability: Support PCB component layout design, ensuring durability under static, dynamic, and thermal loading conditions Comprehensive Documentation: Produce thorough product documentation, including design notes, bills of materials, and user manuals Quality and Safety Adherence: Apply rigorous quality and safety standards throughout project execution. In house prototyping we build and test our products in house. Mechanical dexterity and ability is required. Customer-Centric Approach: Interpret product requirements from customer specifications and ensure strict adherence. Effectively communicate design concepts to multiple stakeholders, including direct interaction with customers Company Values and Self-Driven Problem Solving: Adhere to company policies and procedures related to testing, quality, and documentation release. Demonstrate a proactive and self-motivated approach to solving engineering challenges. Benefits: You will enjoy working as part of a close-knit team where every individual's contribution matters and where you will have the freedom to interact directly with every member of the business. Hybrid Working Unlimited Leave 5% towards each staff members pension scheme contribution Group Life Insurance (4 times basic annual salary) Employee Assistance Programme Minimum educational qualifications: Degree level education in Mechanical Engineering or related subject. Applicants with equivalent alternative qualifications or experience will be considered. Previous Experience: You will have a minimum of 2 years working within a field of mechanical design or simulation. Other advantageous skills: Knowledge of the use of simulation software - both CFD and FEA. Interest in 3D printing technologies. Good mechanical ability, eg experience of machine shops, product assembly Experience of SolidWorks CAD software Working understanding of electronics Familiarity with high voltage (eg electric vehicle) working Design for manufacture and assembly How to apply? Please send a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
02/05/2024
Full time
Role: Mechanical Engineer Location: Warwick + Hybrid working Salary: £40,000 - £60,000 (depending on experience and ability) The Role Power electronics requires collaborative working between electronics engineering and mechanical engineering to ensure thermal management, production feasibility, durability, and service life. As a Mechanical Engineer, reporting to the Mechanical Engineering Team Leader, you will take responsibility for the technical delivery of one or more projects and ensure that the tasks assigned to you are completed in a timely and conscientious fashion. Continued close communication with the relevant project leads is required. You will produce SolidWorks CAD models and associated drawings of complex cooling structures with an eye to manufacturability and cost effectiveness at all times. To assess the effectiveness of these designs you will be required to conduct mechanical and thermal analysis. You will have the opportunity to integrate your own methods and ideas in order to deliver the company's technical innovations. Responsibilities Simulate, Model, and Validate Cooling Structures: Conduct detailed simulations and modelling to design cooling structures that efficiently extract heat from power electronics devices. Validate these designs through rigorous testing, considering both liquid and air cooling methods SolidWorks CAD Design and Prototyping: Utilize SolidWorks to create innovative and efficient CAD designs. Develop associated drawings and guide designs from prototype build to volume manufacturing Sealing System Design and Testing: Design and rigorously test sealing systems for optimal environmental performance on housing component Advanced Manufacturing Processes: Spearhead the development of industry-leading manufacturing processes for machined, sheet metal, and polymer parts Mechanical-Electronics Integration: Specify mechanical connections and interfaces for seamless integration with electronic components. Collaborate with electronics engineers to optimize package size and functionality PCB Component Layout and Durability: Support PCB component layout design, ensuring durability under static, dynamic, and thermal loading conditions Comprehensive Documentation: Produce thorough product documentation, including design notes, bills of materials, and user manuals Quality and Safety Adherence: Apply rigorous quality and safety standards throughout project execution. In house prototyping we build and test our products in house. Mechanical dexterity and ability is required. Customer-Centric Approach: Interpret product requirements from customer specifications and ensure strict adherence. Effectively communicate design concepts to multiple stakeholders, including direct interaction with customers Company Values and Self-Driven Problem Solving: Adhere to company policies and procedures related to testing, quality, and documentation release. Demonstrate a proactive and self-motivated approach to solving engineering challenges. Benefits: You will enjoy working as part of a close-knit team where every individual's contribution matters and where you will have the freedom to interact directly with every member of the business. Hybrid Working Unlimited Leave 5% towards each staff members pension scheme contribution Group Life Insurance (4 times basic annual salary) Employee Assistance Programme Minimum educational qualifications: Degree level education in Mechanical Engineering or related subject. Applicants with equivalent alternative qualifications or experience will be considered. Previous Experience: You will have a minimum of 2 years working within a field of mechanical design or simulation. Other advantageous skills: Knowledge of the use of simulation software - both CFD and FEA. Interest in 3D printing technologies. Good mechanical ability, eg experience of machine shops, product assembly Experience of SolidWorks CAD software Working understanding of electronics Familiarity with high voltage (eg electric vehicle) working Design for manufacture and assembly How to apply? Please send a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
Robert Half Technology are recruiting on a retained basis for an IT Support Engineer to join Safeguard Engineering Limited - a safety and environmental management consultancy, based in Bristol. This is a great opportunity to work for fast growing flexible business, and influence the development of its core IT systems as the company and its customer base grows. The Organisation Safeguard Engineering is a specialist Safety and Environmental Consultancy based in Bristol, with customers throughout the UK, but mainly in the South and South West of England. The team is primarily made up of ex Forces and MoD personnel, together with people who have a safety and environmental consultancy background. They formed the company in 2013 with the aim of providing a flexible and positive working environment for all employees, and with the aim of providing a service to their customers that is independent, expert, value for money and operated with integrity, openness and trust. The role Working closely with the IT Manager, the IT Support Engineer will be first port of call for any IT Support issues or requests, solving where appropriate and escalating where required. Building relationships with internal staff and upholding the reputation of IT within the organisation. Responsibilities: Act as first point of contact for all IT Support Issues and requests via phone, email, teams or in Diagnose and resolve technical hardware and software issues, including laptops, printers, M365 products and Operating systems. Escalate Problems to the IT Manager where applicable/required. Provide User training and assistance on various IT Systems and applications to ensure efficient and effective usage by staff members. Install, configure, and deploy computer hardware, peripherals, and software applications. Ensure compatibility, security, and proper functionality. Maintain and update records of IT Support activities and processes, including ticketing, known issue documentation, knowledge base articles and more. Assist with the management of the Microsoft 365 environment, including Intune, autopilot, Sharepoint and Exchange Create new users as required, provide set up and run Inductions where Communicate technical information effectively to non-technical users in a clear and understandable Keep users informed about the status of their IT Support requests To work in accordance with, and always implement, the companies Quality Management System (QMS) Assist the IT Manager and team with support tasks, IT Project rollouts and planning where required Qualifications and Experience: 2 years of experience on an IT Helpdesk or similar role Proficient in troubleshooting Windows OS Environments Knowledge of Microsoft 365 suite and administration Strong Customer Service and communication skills The ability to work effectively in a team, collaborate and share knowledge Desirable Experience/Knowledge: Experience with Unifi Access points Experience with Sophos Firewalls Experience with security products such as Threatlocker, SentinelOne and Defender for Endpoint Experience with managing Intune, EntraID and Microsoft Security products Full UK Driving license Salary/logistics: £25,000 - £29,000 basic salary DOE Company bonus scheme Work from the Bristol Office at least 3 days a week Occasional travel to satellite sites in the UK Robert Half Ltd acts as an employment business for temporary positions and an employment agency for permanent positions. Robert Half is committed to equal opportunity and diversity. Suitable candidates with equivalent qualifications and more or less experience can apply. Rates of pay and salary ranges are dependent upon your experience, qualifications and training. If you wish to apply, please read our Privacy Notice describing how we may process, disclose and store your personal data: Security alert: scammers are currently targeting jobseekers. Robert Half do not ask candidates for a fee or request candidates to send applications through instant messaging services such as WhatsApp or Telegram. Learn how to protect yourself by visiting our website:
02/05/2024
Full time
Robert Half Technology are recruiting on a retained basis for an IT Support Engineer to join Safeguard Engineering Limited - a safety and environmental management consultancy, based in Bristol. This is a great opportunity to work for fast growing flexible business, and influence the development of its core IT systems as the company and its customer base grows. The Organisation Safeguard Engineering is a specialist Safety and Environmental Consultancy based in Bristol, with customers throughout the UK, but mainly in the South and South West of England. The team is primarily made up of ex Forces and MoD personnel, together with people who have a safety and environmental consultancy background. They formed the company in 2013 with the aim of providing a flexible and positive working environment for all employees, and with the aim of providing a service to their customers that is independent, expert, value for money and operated with integrity, openness and trust. The role Working closely with the IT Manager, the IT Support Engineer will be first port of call for any IT Support issues or requests, solving where appropriate and escalating where required. Building relationships with internal staff and upholding the reputation of IT within the organisation. Responsibilities: Act as first point of contact for all IT Support Issues and requests via phone, email, teams or in Diagnose and resolve technical hardware and software issues, including laptops, printers, M365 products and Operating systems. Escalate Problems to the IT Manager where applicable/required. Provide User training and assistance on various IT Systems and applications to ensure efficient and effective usage by staff members. Install, configure, and deploy computer hardware, peripherals, and software applications. Ensure compatibility, security, and proper functionality. Maintain and update records of IT Support activities and processes, including ticketing, known issue documentation, knowledge base articles and more. Assist with the management of the Microsoft 365 environment, including Intune, autopilot, Sharepoint and Exchange Create new users as required, provide set up and run Inductions where Communicate technical information effectively to non-technical users in a clear and understandable Keep users informed about the status of their IT Support requests To work in accordance with, and always implement, the companies Quality Management System (QMS) Assist the IT Manager and team with support tasks, IT Project rollouts and planning where required Qualifications and Experience: 2 years of experience on an IT Helpdesk or similar role Proficient in troubleshooting Windows OS Environments Knowledge of Microsoft 365 suite and administration Strong Customer Service and communication skills The ability to work effectively in a team, collaborate and share knowledge Desirable Experience/Knowledge: Experience with Unifi Access points Experience with Sophos Firewalls Experience with security products such as Threatlocker, SentinelOne and Defender for Endpoint Experience with managing Intune, EntraID and Microsoft Security products Full UK Driving license Salary/logistics: £25,000 - £29,000 basic salary DOE Company bonus scheme Work from the Bristol Office at least 3 days a week Occasional travel to satellite sites in the UK Robert Half Ltd acts as an employment business for temporary positions and an employment agency for permanent positions. Robert Half is committed to equal opportunity and diversity. Suitable candidates with equivalent qualifications and more or less experience can apply. Rates of pay and salary ranges are dependent upon your experience, qualifications and training. If you wish to apply, please read our Privacy Notice describing how we may process, disclose and store your personal data: Security alert: scammers are currently targeting jobseekers. Robert Half do not ask candidates for a fee or request candidates to send applications through instant messaging services such as WhatsApp or Telegram. Learn how to protect yourself by visiting our website:
Geotechnical Engineer Outside IR35 Site Based What you'll be doing Our client has an exceptional opportunity for a Geotechnical Engineer, overseeing the crucial earthworks exercise at the renowned former Honda site in Swindon. As the appointed engineer for a cutting-edge industrial park development, you will play a pivotal role in shaping the landscape of a new distribution hub and associated infrastructure. This is a site-based position, offering Full time engagement over an estimated period of 15-months, commencing in May 2024. As a Geotechnical Engineer, you will spearhead the oversight of earthworks activities, ensuring strict adherence to specified standards and meticulous attention to detail. Your responsibilities will encompass: Project Leadership: Take charge of the geotechnical aspects of the enabling, serving as the primary point of contact. Quality Assurance: Implement rigorous quality control measures to guarantee that earthworks are executed in accordance with designated specifications and industry best practices. Collaboration: Foster effective communication and collaboration with multidisciplinary teams, including contractors, engineers, and project stakeholders, to achieve project objectives. Compliance: Ensure strict compliance with health, safety, and environmental regulations, promoting a culture of safety and sustainability across all earthworks activities. Documentation and Reporting: Maintain accurate records of earthworks progress, deviations, and corrective actions, generating comprehensive reports for internal and external stakeholders as necessary. As a vital member of our dynamic team, you will have the opportunity to contribute to the success of this high-profile project while furthering your career in geotechnical engineering. If you are a driven professional with a passion for excellence and a desire to make a lasting impact, we invite you to join us in this exciting journey. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
01/05/2024
Project-based
Geotechnical Engineer Outside IR35 Site Based What you'll be doing Our client has an exceptional opportunity for a Geotechnical Engineer, overseeing the crucial earthworks exercise at the renowned former Honda site in Swindon. As the appointed engineer for a cutting-edge industrial park development, you will play a pivotal role in shaping the landscape of a new distribution hub and associated infrastructure. This is a site-based position, offering Full time engagement over an estimated period of 15-months, commencing in May 2024. As a Geotechnical Engineer, you will spearhead the oversight of earthworks activities, ensuring strict adherence to specified standards and meticulous attention to detail. Your responsibilities will encompass: Project Leadership: Take charge of the geotechnical aspects of the enabling, serving as the primary point of contact. Quality Assurance: Implement rigorous quality control measures to guarantee that earthworks are executed in accordance with designated specifications and industry best practices. Collaboration: Foster effective communication and collaboration with multidisciplinary teams, including contractors, engineers, and project stakeholders, to achieve project objectives. Compliance: Ensure strict compliance with health, safety, and environmental regulations, promoting a culture of safety and sustainability across all earthworks activities. Documentation and Reporting: Maintain accurate records of earthworks progress, deviations, and corrective actions, generating comprehensive reports for internal and external stakeholders as necessary. As a vital member of our dynamic team, you will have the opportunity to contribute to the success of this high-profile project while furthering your career in geotechnical engineering. If you are a driven professional with a passion for excellence and a desire to make a lasting impact, we invite you to join us in this exciting journey. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
Job description Coating Technician, Full-Time on-site in Leicestershire. Up to £29K (Shift Pattern: 06.00 - 14.00/14.00 - 22.00 - Monday - Friday). Possible weekend requirement. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Mission: To assist the coating department by using optical technological knowledge to help with production requirements to meet on-time-delivery requirements Yield expectations.To stay competitive within the current market and to assist in new product development.To make recommendations for continuous process improvements and may instigate relevant development activity. Key Responsibilities -Ability to measure and assess work on the appropriate spectrophotometers. -Ability to identify potential coating problems 'in process' and take appropriate corrective action. -Ability to identify coating defects such as spatter, striae, delamination, lint marks, comet marks etc. and understand the possible causes and know the type of action to take to avoid their occurrence. Possesses a thorough understanding of relevant Surface Quality Specifications and how the above relates to them. -Examine work prior to coating and be satisfied it is fit to coat. -Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. -Capable of stripping optics safely, observing Local Health and Safety rules. -Identify potential problems with the coating plant/measuring equipment and alert the appropriate support staff. -Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002. -Competent to train colleagues on various aspects of the coating department. Education, Skills Abilities : -Qualifications in Mathematics and Physics at least to GCSE or A level -Computer literacy, including familiarity with Excel and Word -The ability to analyse situations and results -A good understanding of optical manufacture -A good engineering background SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
01/05/2024
Full time
Job description Coating Technician, Full-Time on-site in Leicestershire. Up to £29K (Shift Pattern: 06.00 - 14.00/14.00 - 22.00 - Monday - Friday). Possible weekend requirement. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Mission: To assist the coating department by using optical technological knowledge to help with production requirements to meet on-time-delivery requirements Yield expectations.To stay competitive within the current market and to assist in new product development.To make recommendations for continuous process improvements and may instigate relevant development activity. Key Responsibilities -Ability to measure and assess work on the appropriate spectrophotometers. -Ability to identify potential coating problems 'in process' and take appropriate corrective action. -Ability to identify coating defects such as spatter, striae, delamination, lint marks, comet marks etc. and understand the possible causes and know the type of action to take to avoid their occurrence. Possesses a thorough understanding of relevant Surface Quality Specifications and how the above relates to them. -Examine work prior to coating and be satisfied it is fit to coat. -Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. -Capable of stripping optics safely, observing Local Health and Safety rules. -Identify potential problems with the coating plant/measuring equipment and alert the appropriate support staff. -Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002. -Competent to train colleagues on various aspects of the coating department. Education, Skills Abilities : -Qualifications in Mathematics and Physics at least to GCSE or A level -Computer literacy, including familiarity with Excel and Word -The ability to analyse situations and results -A good understanding of optical manufacture -A good engineering background SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
A leading Defence client of ours is currently looking for a Principal Systems Engineer within their Defence team to work on a variety of safety/mission critical projects. The right candidate will be responsible for understanding the customers complex needs and developing, validating & managing Systems requirements at all levels. What you'll be doing: * Developing complex system architectures and sub-systems using a Model Based Systems Engineering approach * Integration, analysis and test of Real Time systems containing multiple technical disciplines such as electronic, mechanical, optical and software sub-systems. * Taking accountability for collaborative technical work package execution and associated outcomes * Providing guidance, coaching and nurturing talent in other engineers * Verifying that customer needs are satisfied * Steering new and improved systems development through implementation whilst making use of best practice systems life cycle processes alongside techniques such as Learn First and Agile Your skills and experiences: Essential: * Proven experience developing systems in relevant product markets and/or domains, such as control systems, Real Time displays or other safety related systems * Proven experience in requirements management, design analyses, modelling and simulation, using tools such as DOORS, Siemens Polarion, Enterprise Architect, MATLAB and/or Simulink and design methodologies such as SysML * A degree or equivalent qualification in a relevant Scientific/Engineering subject (eg Systems Engineering, Electronic Engineering, Physics or Mathematics) Desirable: * Experience in integration, test, and/or verification of Real Time and/or safety related systems * Understanding of safety assessment processes including how these processes influence the design * Customer and/or supplier liaison experience for technical aspects, verifying and obtaining agreement that customer needs are satisfied * An understanding of information assurance, cyber security and environmental impact aspects relating to Real Time Embedded engineering products Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
30/04/2024
Full time
A leading Defence client of ours is currently looking for a Principal Systems Engineer within their Defence team to work on a variety of safety/mission critical projects. The right candidate will be responsible for understanding the customers complex needs and developing, validating & managing Systems requirements at all levels. What you'll be doing: * Developing complex system architectures and sub-systems using a Model Based Systems Engineering approach * Integration, analysis and test of Real Time systems containing multiple technical disciplines such as electronic, mechanical, optical and software sub-systems. * Taking accountability for collaborative technical work package execution and associated outcomes * Providing guidance, coaching and nurturing talent in other engineers * Verifying that customer needs are satisfied * Steering new and improved systems development through implementation whilst making use of best practice systems life cycle processes alongside techniques such as Learn First and Agile Your skills and experiences: Essential: * Proven experience developing systems in relevant product markets and/or domains, such as control systems, Real Time displays or other safety related systems * Proven experience in requirements management, design analyses, modelling and simulation, using tools such as DOORS, Siemens Polarion, Enterprise Architect, MATLAB and/or Simulink and design methodologies such as SysML * A degree or equivalent qualification in a relevant Scientific/Engineering subject (eg Systems Engineering, Electronic Engineering, Physics or Mathematics) Desirable: * Experience in integration, test, and/or verification of Real Time and/or safety related systems * Understanding of safety assessment processes including how these processes influence the design * Customer and/or supplier liaison experience for technical aspects, verifying and obtaining agreement that customer needs are satisfied * An understanding of information assurance, cyber security and environmental impact aspects relating to Real Time Embedded engineering products Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Kalcor Coatings Company is seeking a CHEMIST for its location in Willoughby, OH. Started in 1961, Kalcor Coatings Company is A Right Size Company designing and manufacturing customized coatings and paint products to meet our customers' specific needs. Our primary goal is to be a successful developer/producer/marketer of high-performance coatings with a deserved reputation for integrity, responsibility, and competence in its treatment of employees, customers, suppliers, community and the public at large. Responsibilities Reporting to the Technical Director, this position has the following responsibilities: Perform specialized and advanced analyses, testing, and formulation of new and existing coating products and requirements. Perform small batch/sample manufacture, color matching, and testing. Assist in developing and specifying processes for coatings scale-up and manufacture. Evaluate new and existing raw materials for product improvement, availability, and/or cost benefits. Prepare reports and documents detailing project design, results, and conclusions; recommend additional actions or research. Support existing product lines via internal and external customer interaction, including technical service visits. Coordinate all regulatory and related environmental activities for Kalcor products and facility compliance in conjunction with the Technical Director. Perform daily housekeeping of laboratory and associated areas, functioning within safety guidelines. Qualifications Bachelor's degree in chemistry or a technical discipline (science or engineering). 5+ years of experience in a paint, coatings, or chemical laboratory, including formulation experience. Will consider a combination of experience and education. Broad range of formulation experience, including UV, waterborne, and solvent borne. Experience with 2K component a plus. Familiarity with design of experiment approach (DOE) and the ability to design, document, report, interpret and present findings as well as design follow-up experiments. Strong written and oral communication skills, including the ability to effectively present information to a variety of people (ie customers, public groups, top management, and boards of directors). Ability to operate, maintain, and calibrate a variety of specialized test and lab equipment, including color spectrophotometer. Working knowledge of MS Office (Word, Excel, PowerPoint, Outlook) and prior experience with formulation/processing software, color analysis and matching programs, or willingness and ability to learn. Exceptional mathematical, problem solving, documentation and organizational skills. Strong attention to detail and accuracy. Willingness and ability to travel to customer locations as needed. Valid driver's license and ability to be insured through the company's insurer. Candidates must be able to pass a color test, regularly lift and/or move up to 60 pounds, wear a fitted respirator and dust mask, and tolerate solvent odors and other chemicals used within the facility. Kalcor is a smoke-free, tobacco-free and vaping-free facility. If you are looking for a work environment that expects high quality work, professional conduct and respectful consideration for customers and coworkers alike, and you possess the skills and competencies for the Chemist position, we would like to hear from you! Equal Opportunity Employer
30/04/2024
Full time
Kalcor Coatings Company is seeking a CHEMIST for its location in Willoughby, OH. Started in 1961, Kalcor Coatings Company is A Right Size Company designing and manufacturing customized coatings and paint products to meet our customers' specific needs. Our primary goal is to be a successful developer/producer/marketer of high-performance coatings with a deserved reputation for integrity, responsibility, and competence in its treatment of employees, customers, suppliers, community and the public at large. Responsibilities Reporting to the Technical Director, this position has the following responsibilities: Perform specialized and advanced analyses, testing, and formulation of new and existing coating products and requirements. Perform small batch/sample manufacture, color matching, and testing. Assist in developing and specifying processes for coatings scale-up and manufacture. Evaluate new and existing raw materials for product improvement, availability, and/or cost benefits. Prepare reports and documents detailing project design, results, and conclusions; recommend additional actions or research. Support existing product lines via internal and external customer interaction, including technical service visits. Coordinate all regulatory and related environmental activities for Kalcor products and facility compliance in conjunction with the Technical Director. Perform daily housekeeping of laboratory and associated areas, functioning within safety guidelines. Qualifications Bachelor's degree in chemistry or a technical discipline (science or engineering). 5+ years of experience in a paint, coatings, or chemical laboratory, including formulation experience. Will consider a combination of experience and education. Broad range of formulation experience, including UV, waterborne, and solvent borne. Experience with 2K component a plus. Familiarity with design of experiment approach (DOE) and the ability to design, document, report, interpret and present findings as well as design follow-up experiments. Strong written and oral communication skills, including the ability to effectively present information to a variety of people (ie customers, public groups, top management, and boards of directors). Ability to operate, maintain, and calibrate a variety of specialized test and lab equipment, including color spectrophotometer. Working knowledge of MS Office (Word, Excel, PowerPoint, Outlook) and prior experience with formulation/processing software, color analysis and matching programs, or willingness and ability to learn. Exceptional mathematical, problem solving, documentation and organizational skills. Strong attention to detail and accuracy. Willingness and ability to travel to customer locations as needed. Valid driver's license and ability to be insured through the company's insurer. Candidates must be able to pass a color test, regularly lift and/or move up to 60 pounds, wear a fitted respirator and dust mask, and tolerate solvent odors and other chemicals used within the facility. Kalcor is a smoke-free, tobacco-free and vaping-free facility. If you are looking for a work environment that expects high quality work, professional conduct and respectful consideration for customers and coworkers alike, and you possess the skills and competencies for the Chemist position, we would like to hear from you! Equal Opportunity Employer
Technical Operator (Water Industry) Hours: 40 Hours per week, plus standby duty Location: Hampton Loade Bridgenorth Saray: £31,600 per annum About Us: At South Staffs Water, we deliver clean and reliable water supplies to around 1.7 million customers within the South Staffs and Cambridge regions. As a water only Company, providing clean, healthy water 24 hours a day, 365 days a year is at the very heart of what we do and that's where you come in. The role: As part of the role, you will work closely with a range of internal and external contacts on a daily basis. You will be responsible for maintaining the control and operation of strategic source water sites and will be required to manage your time effectively to complete a demanding schedule of plant maintenance activities. • Conduct basic electrical tasks. • Knowledge and application of technical skills to operate, maintain, improve, and repair equipment. • Maintain control and oversee the operation of strategic source water sites. • Effectively manage your time to complete a demanding schedule of plant maintenance activities. • Demonstrate an understanding of the principles of site design and operation. • Utilise appropriate safety and environmental procedures for people, processes, materials, products, and equipment to ensure a safe working environment for the entire team. • Ensure that all aspects of quality within the area of responsibility adhere to local quality procedures. • Attend to site and equipment breakdowns to safely restore plant supply. What you'll need • HNC level (or equivalent) in Electrical Engineering or alternatively equivalent relevant experience is desirable but not essential. • An electrical background in the utilities or similar industry is essential to the role; a Water industry background is desirable. • Computer literate (Excel, Word, Outlook) • Full driving licence • Health and safety are a priority for all members of the production team. You will have experience of reviewing risk assessments and are always confident to challenge and enforce safe working practices. Essential training will be provided which will help you gain the confidence within the operational area. What you'll get in return • Competitive Salary of £31,600 per annum • Company pension with employer contribution. • Store discount for personal shopping needs. • 24-hour helpline providing free and confidential advice to you and your family on financial, legal, marital and health.
25/04/2024
Full time
Technical Operator (Water Industry) Hours: 40 Hours per week, plus standby duty Location: Hampton Loade Bridgenorth Saray: £31,600 per annum About Us: At South Staffs Water, we deliver clean and reliable water supplies to around 1.7 million customers within the South Staffs and Cambridge regions. As a water only Company, providing clean, healthy water 24 hours a day, 365 days a year is at the very heart of what we do and that's where you come in. The role: As part of the role, you will work closely with a range of internal and external contacts on a daily basis. You will be responsible for maintaining the control and operation of strategic source water sites and will be required to manage your time effectively to complete a demanding schedule of plant maintenance activities. • Conduct basic electrical tasks. • Knowledge and application of technical skills to operate, maintain, improve, and repair equipment. • Maintain control and oversee the operation of strategic source water sites. • Effectively manage your time to complete a demanding schedule of plant maintenance activities. • Demonstrate an understanding of the principles of site design and operation. • Utilise appropriate safety and environmental procedures for people, processes, materials, products, and equipment to ensure a safe working environment for the entire team. • Ensure that all aspects of quality within the area of responsibility adhere to local quality procedures. • Attend to site and equipment breakdowns to safely restore plant supply. What you'll need • HNC level (or equivalent) in Electrical Engineering or alternatively equivalent relevant experience is desirable but not essential. • An electrical background in the utilities or similar industry is essential to the role; a Water industry background is desirable. • Computer literate (Excel, Word, Outlook) • Full driving licence • Health and safety are a priority for all members of the production team. You will have experience of reviewing risk assessments and are always confident to challenge and enforce safe working practices. Essential training will be provided which will help you gain the confidence within the operational area. What you'll get in return • Competitive Salary of £31,600 per annum • Company pension with employer contribution. • Store discount for personal shopping needs. • 24-hour helpline providing free and confidential advice to you and your family on financial, legal, marital and health.