AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
06/05/2024
Project-based
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
Overview Reporting to the Process Engineering Manager, the Production Support Engineer is responsible for ensuring optimal OEE (Overall Equipment Effectiveness), through effective preventative maintenance and corrective actions to reduce equipment down time, in line with the expectations of Operations. Additionally, providing engineering support to Operations and ensuring continuous improvement. The successful candidate will join the Process Engineering team, reporting to the Process Engineering Manager. This team is comprised of 4 employees. Experience: Electronics: Candidate will have detailed knowledge of repair fault finding and minor design. Manufacturing: The candidate has previously worked in a high-precision electronics manufacturing environment supporting and repairing equipment and systems. IT skills: Computer literate; with experience of using Microsoft windows software to complete work done reports and monitor equipment usage (i.e. word, excel etc.) Continuous improvement and Problem- Solving: Candidates will be familiar with making improvements to equipment / systems and services to improve utilisation and operational/production productivity and throughput. You will be familiar of the creation and implementation of lean working processes and able to demonstrate a structured approach to problem-solving, root-cause analysis. Ability to construct an FMEA would be highly desirable Documentation: The candidate has the ability to interpret drawings, specifications, work instructions and create new ones if required. Maintenance of Equipment: You will be able to demonstrate their ability to support and repair equipment and systems. Mechanical Exposure: Have worked in an environment with some mechanical requirement (assembling items etc). ERP Systems: Exposure to ERP systems. Manufacturing: Experience in electronic instrumentation. Overall Equipment Effectiveness (OEE): Able to track and monitor equipment utilisation and reliability to identify preventative maintenance measures to improve reliability and up-time. Understand measuring equipment operation and ensuring optimal overall equipment effectiveness. H&S: Knowledge of Health and Safety at work. Education: HNC or above in electronics, we will consider candidates who are qualified by experience. Normal hours of work will be 08:00 - 16:15 Monday to Thursday, 08:00 - 15;00 on Friday with half an hour for lunch. This role is not hybrid Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
04/05/2024
Full time
Overview Reporting to the Process Engineering Manager, the Production Support Engineer is responsible for ensuring optimal OEE (Overall Equipment Effectiveness), through effective preventative maintenance and corrective actions to reduce equipment down time, in line with the expectations of Operations. Additionally, providing engineering support to Operations and ensuring continuous improvement. The successful candidate will join the Process Engineering team, reporting to the Process Engineering Manager. This team is comprised of 4 employees. Experience: Electronics: Candidate will have detailed knowledge of repair fault finding and minor design. Manufacturing: The candidate has previously worked in a high-precision electronics manufacturing environment supporting and repairing equipment and systems. IT skills: Computer literate; with experience of using Microsoft windows software to complete work done reports and monitor equipment usage (i.e. word, excel etc.) Continuous improvement and Problem- Solving: Candidates will be familiar with making improvements to equipment / systems and services to improve utilisation and operational/production productivity and throughput. You will be familiar of the creation and implementation of lean working processes and able to demonstrate a structured approach to problem-solving, root-cause analysis. Ability to construct an FMEA would be highly desirable Documentation: The candidate has the ability to interpret drawings, specifications, work instructions and create new ones if required. Maintenance of Equipment: You will be able to demonstrate their ability to support and repair equipment and systems. Mechanical Exposure: Have worked in an environment with some mechanical requirement (assembling items etc). ERP Systems: Exposure to ERP systems. Manufacturing: Experience in electronic instrumentation. Overall Equipment Effectiveness (OEE): Able to track and monitor equipment utilisation and reliability to identify preventative maintenance measures to improve reliability and up-time. Understand measuring equipment operation and ensuring optimal overall equipment effectiveness. H&S: Knowledge of Health and Safety at work. Education: HNC or above in electronics, we will consider candidates who are qualified by experience. Normal hours of work will be 08:00 - 16:15 Monday to Thursday, 08:00 - 15;00 on Friday with half an hour for lunch. This role is not hybrid Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
Position Available : Validation Engineer Location : Greater Manchester (Hybrid) & Dynamic Working Hours Salary : Up to £50,000 + Company Bonus & Very Good Pension Package Experience needed : Experience of working in manufacturing engineering or process engineering within a complex engineering or manufacturing environment such as defence, aerospace, automotive, robotics and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have a vacancy available as a Supply Chain Validation Engineer to join our team who are responsible for validating the external supply chain to ensure successful delivery of parts required to support development programmes in preparation for full rate production. The role will include the following: Handling a portfolio of suppliers on a day-to-day basis and handle the project Industrial Validation Plan Assess & validate the supply chain and suppliers' capability to meet our requirements Undertake Industrial Validation activities such as: Process FMEAs, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews in preparation for series production. Identify potential manufacturing & supply chain risks and put in place associated improvement and mitigation plans Handle & validate elements of manufacturing capability transfer from in house to supplier Collaborating and supporting a multi-functional team What we need from you: Skilled in manufacturing engineering with a solid understanding of manufacturing processes and techniques An appreciation for project delivery and project management Proficient in Industrial Validation tools such as: Process FMEAs, Measurement System Analysis, Process Mapping, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews Excellent problem-solving skills to develop and implement root cause analysis and improvement plans within Supply Chain for manufacturing system deviations Capable of supporting suppliers/customers to ensure that they develop robust manufacturing systems and control plans Ideally, the applicant will have New Product Introduction (NPI) and/or manufacturing capability transfer experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
03/05/2024
Full time
Position Available : Validation Engineer Location : Greater Manchester (Hybrid) & Dynamic Working Hours Salary : Up to £50,000 + Company Bonus & Very Good Pension Package Experience needed : Experience of working in manufacturing engineering or process engineering within a complex engineering or manufacturing environment such as defence, aerospace, automotive, robotics and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have a vacancy available as a Supply Chain Validation Engineer to join our team who are responsible for validating the external supply chain to ensure successful delivery of parts required to support development programmes in preparation for full rate production. The role will include the following: Handling a portfolio of suppliers on a day-to-day basis and handle the project Industrial Validation Plan Assess & validate the supply chain and suppliers' capability to meet our requirements Undertake Industrial Validation activities such as: Process FMEAs, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews in preparation for series production. Identify potential manufacturing & supply chain risks and put in place associated improvement and mitigation plans Handle & validate elements of manufacturing capability transfer from in house to supplier Collaborating and supporting a multi-functional team What we need from you: Skilled in manufacturing engineering with a solid understanding of manufacturing processes and techniques An appreciation for project delivery and project management Proficient in Industrial Validation tools such as: Process FMEAs, Measurement System Analysis, Process Mapping, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews Excellent problem-solving skills to develop and implement root cause analysis and improvement plans within Supply Chain for manufacturing system deviations Capable of supporting suppliers/customers to ensure that they develop robust manufacturing systems and control plans Ideally, the applicant will have New Product Introduction (NPI) and/or manufacturing capability transfer experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Validation Engineer Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £50,000 + Company Bonus & Very Good Pension Package Experience needed : Experience of working in manufacturing engineering or process engineering within a complex engineering or manufacturing environment such as defence, aerospace, automotive, robotics and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have a vacancy available as a Supply Chain Validation Engineer to join our team who are responsible for validating the external supply chain to ensure successful delivery of parts required to support development programmes in preparation for full rate production. The role will include the following: Handling a portfolio of suppliers on a day-to-day basis and handle the project Industrial Validation Plan Assess & validate the supply chain and suppliers' capability to meet our requirements Undertake Industrial Validation activities such as: Process FMEAs, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews in preparation for series production. Identify potential manufacturing & supply chain risks and put in place associated improvement and mitigation plans Handle & validate elements of manufacturing capability transfer from in house to supplier Collaborating and supporting a multi-functional team What we need from you: Skilled in manufacturing engineering with a solid understanding of manufacturing processes and techniques An appreciation for project delivery and project management Proficient in Industrial Validation tools such as: Process FMEAs, Measurement System Analysis, Process Mapping, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews Excellent problem-solving skills to develop and implement root cause analysis and improvement plans within Supply Chain for manufacturing system deviations Capable of supporting suppliers/customers to ensure that they develop robust manufacturing systems and control plans Ideally, the applicant will have New Product Introduction (NPI) and/or manufacturing capability transfer experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
03/05/2024
Full time
Position Available : Validation Engineer Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £50,000 + Company Bonus & Very Good Pension Package Experience needed : Experience of working in manufacturing engineering or process engineering within a complex engineering or manufacturing environment such as defence, aerospace, automotive, robotics and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have a vacancy available as a Supply Chain Validation Engineer to join our team who are responsible for validating the external supply chain to ensure successful delivery of parts required to support development programmes in preparation for full rate production. The role will include the following: Handling a portfolio of suppliers on a day-to-day basis and handle the project Industrial Validation Plan Assess & validate the supply chain and suppliers' capability to meet our requirements Undertake Industrial Validation activities such as: Process FMEAs, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews in preparation for series production. Identify potential manufacturing & supply chain risks and put in place associated improvement and mitigation plans Handle & validate elements of manufacturing capability transfer from in house to supplier Collaborating and supporting a multi-functional team What we need from you: Skilled in manufacturing engineering with a solid understanding of manufacturing processes and techniques An appreciation for project delivery and project management Proficient in Industrial Validation tools such as: Process FMEAs, Measurement System Analysis, Process Mapping, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews Excellent problem-solving skills to develop and implement root cause analysis and improvement plans within Supply Chain for manufacturing system deviations Capable of supporting suppliers/customers to ensure that they develop robust manufacturing systems and control plans Ideally, the applicant will have New Product Introduction (NPI) and/or manufacturing capability transfer experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Manufacturing Engineer Location : Henlow - Dynamic Working Hours Salary : Up to £42,000 + Paid Overtime, Company Bonus & Very Good Pension Package About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Manufacturing Engineer to work in our team. In this role you will support the team in: Support existing manufacturing lines and new product introduction Support the industrial validation process through the use of FMEA's, process proving activities etc. Liaising with COSHH assessors, SHE and Human Factors Ensuring compliance across all manufacturing procedures Ensuring updates of Manufacturing Instructions and maintenance of production BOMs and on time and in line with master production schedule (MPS). What we need from you: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 is a mandatory requirement Formal further education certificate to HNC or equivalent in a relevant subject OR BEng in relevant Engineering Degree Eagerness to contribute to an environment of process improvement The ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions Confidence in managing teams and leading discussions with teams and individuals If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
03/05/2024
Full time
Position Available : Manufacturing Engineer Location : Henlow - Dynamic Working Hours Salary : Up to £42,000 + Paid Overtime, Company Bonus & Very Good Pension Package About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Manufacturing Engineer to work in our team. In this role you will support the team in: Support existing manufacturing lines and new product introduction Support the industrial validation process through the use of FMEA's, process proving activities etc. Liaising with COSHH assessors, SHE and Human Factors Ensuring compliance across all manufacturing procedures Ensuring updates of Manufacturing Instructions and maintenance of production BOMs and on time and in line with master production schedule (MPS). What we need from you: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 is a mandatory requirement Formal further education certificate to HNC or equivalent in a relevant subject OR BEng in relevant Engineering Degree Eagerness to contribute to an environment of process improvement The ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions Confidence in managing teams and leading discussions with teams and individuals If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Manufacturing Engineer Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £50,000 + Company Bonus & Very Good Pension Package Experience needed : We are looking for a manufacturing engineer or process engineer with experience of validating the quality of parts/products, who is able to transfer their skill set into validating our supply chain. The candidate would need to have experience of working within a complex engineering or manufacturing environment such as defence, aerospace, automotive, robotics and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have a vacancy available as a Supply Chain Validation Engineer to join our team who are responsible for validating the external supply chain to ensure successful delivery of parts required to support development programmes in preparation for full rate production. The role will include the following: Handling a portfolio of suppliers on a day-to-day basis and handle the project Industrial Validation Plan Assess & validate the supply chain and suppliers' capability to meet our requirements Undertake Industrial Validation activities such as: Process FMEAs, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews in preparation for series production. Identify potential manufacturing & supply chain risks and put in place associated improvement and mitigation plans Handle & validate elements of manufacturing capability transfer from in house to supplier Collaborating and supporting a multi-functional team What we need from you: Skilled in manufacturing engineering with a solid understanding of manufacturing processes and techniques An appreciation for project delivery and project management Proficient in Industrial Validation tools such as: Process FMEAs, Measurement System Analysis, Process Mapping, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews Excellent problem-solving skills to develop and implement root cause analysis and improvement plans within Supply Chain for manufacturing system deviations Capable of supporting suppliers/customers to ensure that they develop robust manufacturing systems and control plans Ideally, the applicant will have New Product Introduction (NPI) and/or manufacturing capability transfer experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
03/05/2024
Full time
Position Available : Manufacturing Engineer Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £50,000 + Company Bonus & Very Good Pension Package Experience needed : We are looking for a manufacturing engineer or process engineer with experience of validating the quality of parts/products, who is able to transfer their skill set into validating our supply chain. The candidate would need to have experience of working within a complex engineering or manufacturing environment such as defence, aerospace, automotive, robotics and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have a vacancy available as a Supply Chain Validation Engineer to join our team who are responsible for validating the external supply chain to ensure successful delivery of parts required to support development programmes in preparation for full rate production. The role will include the following: Handling a portfolio of suppliers on a day-to-day basis and handle the project Industrial Validation Plan Assess & validate the supply chain and suppliers' capability to meet our requirements Undertake Industrial Validation activities such as: Process FMEAs, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews in preparation for series production. Identify potential manufacturing & supply chain risks and put in place associated improvement and mitigation plans Handle & validate elements of manufacturing capability transfer from in house to supplier Collaborating and supporting a multi-functional team What we need from you: Skilled in manufacturing engineering with a solid understanding of manufacturing processes and techniques An appreciation for project delivery and project management Proficient in Industrial Validation tools such as: Process FMEAs, Measurement System Analysis, Process Mapping, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews Excellent problem-solving skills to develop and implement root cause analysis and improvement plans within Supply Chain for manufacturing system deviations Capable of supporting suppliers/customers to ensure that they develop robust manufacturing systems and control plans Ideally, the applicant will have New Product Introduction (NPI) and/or manufacturing capability transfer experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Manufacturing Engineer Location : Bolton (1-2 days in office a week) Salary : Up to £52,000 + Company Bonus & Very Good Pension Package Experience needed : We are looking for a manufacturing engineer or process engineer with experience of validating the quality of parts/products, who is able to transfer their skill set into validating our supply chain. The candidate would need to have experience of working within a complex engineering or manufacturing environment such as defence, aerospace, automotive, robotics and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have a vacancy available as a Supply Chain Validation Engineer to join our team who are responsible for validating the external supply chain to ensure successful delivery of parts required to support development programmes in preparation for full rate production. The role will include the following: Handling a portfolio of suppliers on a day-to-day basis and handle the project Industrial Validation Plan Assess & validate the supply chain and suppliers' capability to meet our requirements Undertake Industrial Validation activities such as: Process FMEAs, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews in preparation for series production. Identify potential manufacturing & supply chain risks and put in place associated improvement and mitigation plans Handle & validate elements of manufacturing capability transfer from in house to supplier Collaborating and supporting a multi-functional team What we need from you: Skilled in manufacturing engineering with a solid understanding of manufacturing processes and techniques An appreciation for project delivery and project management Proficient in Industrial Validation tools such as: Process FMEAs, Measurement System Analysis, Process Mapping, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews Excellent problem-solving skills to develop and implement root cause analysis and improvement plans within Supply Chain for manufacturing system deviations Capable of supporting suppliers/customers to ensure that they develop robust manufacturing systems and control plans Ideally, the applicant will have New Product Introduction (NPI) and/or manufacturing capability transfer experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
03/05/2024
Full time
Position Available : Manufacturing Engineer Location : Bolton (1-2 days in office a week) Salary : Up to £52,000 + Company Bonus & Very Good Pension Package Experience needed : We are looking for a manufacturing engineer or process engineer with experience of validating the quality of parts/products, who is able to transfer their skill set into validating our supply chain. The candidate would need to have experience of working within a complex engineering or manufacturing environment such as defence, aerospace, automotive, robotics and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have a vacancy available as a Supply Chain Validation Engineer to join our team who are responsible for validating the external supply chain to ensure successful delivery of parts required to support development programmes in preparation for full rate production. The role will include the following: Handling a portfolio of suppliers on a day-to-day basis and handle the project Industrial Validation Plan Assess & validate the supply chain and suppliers' capability to meet our requirements Undertake Industrial Validation activities such as: Process FMEAs, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews in preparation for series production. Identify potential manufacturing & supply chain risks and put in place associated improvement and mitigation plans Handle & validate elements of manufacturing capability transfer from in house to supplier Collaborating and supporting a multi-functional team What we need from you: Skilled in manufacturing engineering with a solid understanding of manufacturing processes and techniques An appreciation for project delivery and project management Proficient in Industrial Validation tools such as: Process FMEAs, Measurement System Analysis, Process Mapping, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews Excellent problem-solving skills to develop and implement root cause analysis and improvement plans within Supply Chain for manufacturing system deviations Capable of supporting suppliers/customers to ensure that they develop robust manufacturing systems and control plans Ideally, the applicant will have New Product Introduction (NPI) and/or manufacturing capability transfer experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : RF Systems Engineer Location : Bristol - Dynamic Working Hours Salary : Up to £63,000 + Paid Overtime, Company Bonus & Very Good Pension Package Experience needed : Experience in RF, DSP, Antenna & Modelling and experience being involved with the full product life cycle from research and concept development to system design, integration, verification and validation. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Supplier Development Manager to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Designing and developing RF systems Participating in, or leading design reviews across the product life cycle. Coordinating the transition of development hardware into production, including environmental testing, qualification testing and design certification. System level functionality proving, Software/Firmware integration and proving. What we need from you: RF/Microwave systems knowledge Understanding of waveform design and implementation Requirements management and systems design Technical leadership of junior engineers System level RF modelling Antenna design and/or EM modelling Familiarity of Real Time Digital Signal Processing for high data bandwidth systems Systems modelling and Autocode generation experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
03/05/2024
Full time
Position Available : RF Systems Engineer Location : Bristol - Dynamic Working Hours Salary : Up to £63,000 + Paid Overtime, Company Bonus & Very Good Pension Package Experience needed : Experience in RF, DSP, Antenna & Modelling and experience being involved with the full product life cycle from research and concept development to system design, integration, verification and validation. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Supplier Development Manager to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Designing and developing RF systems Participating in, or leading design reviews across the product life cycle. Coordinating the transition of development hardware into production, including environmental testing, qualification testing and design certification. System level functionality proving, Software/Firmware integration and proving. What we need from you: RF/Microwave systems knowledge Understanding of waveform design and implementation Requirements management and systems design Technical leadership of junior engineers System level RF modelling Antenna design and/or EM modelling Familiarity of Real Time Digital Signal Processing for high data bandwidth systems Systems modelling and Autocode generation experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
ARM (Advanced Resource Managers)
Corsham, Wiltshire
Lead Mechanical Engineer (Assembly, Integration & Testing) Corsham 12-month contract Paying up to £45p/h (Umbrella) ARM have partnered with an Aerospace client who are looking for an experienced AIT engineer to work out of their manufacturing site based in Corsham. As the AIT Lead Engineer, you'll be responsible for leading the Mechanical team and ensuring all engineering concepts are delivered to the shop floor. Responsibilities: * Leading a team of AIT engineers on specific projects as well as planning the mechanical team's activities on a weekly basis. * Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A - E' * Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures, and test reports. * Control of all project MGSE, flight & support equipment * Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. * Alignment - producing test procedures and operating and maintaining optical alignment equipment. * Designing test equipment, overseeing its manufacture, and commissioning * Mechanical handling of spacecraft, instruments, payloads, solar arrays, antennas etc * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Install and validate test instrumentation. * Support propulsion testing * Handling and installation of thermal hardware * Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation associated with performing these tasks. * Pyrotechnic handling, installation, and safety * Plan and control the workload of the AIT team consisting of engineers and technicians. * Be able to travel overseas to work for short periods (typically 2-3 months, could be 6-7 months on occasions) * Be able to integrate quickly and easily into an AIT team. Experience required: * Appreciation of satellite integration processes and project phases * Use of SAP or other ERP System * Understanding of build documentation and the need for it * Driving build quality through review of processes and implementation of improvements * Managing a team during day-to-day activities ensuring work is completed on time and the correct standard. * Controlling and delivery of projects to budget and schedule * Face-to-face dealings with customers and suppliers * Worked in volatile, high-pressure environments to resolve technical and personnel conflicts. * Spacecraft Mechanical testing on prime projects is essential. * Leading other team members * Production of MGSE specs and operation of MGSE and flight HW * Production of high-quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
03/05/2024
Project-based
Lead Mechanical Engineer (Assembly, Integration & Testing) Corsham 12-month contract Paying up to £45p/h (Umbrella) ARM have partnered with an Aerospace client who are looking for an experienced AIT engineer to work out of their manufacturing site based in Corsham. As the AIT Lead Engineer, you'll be responsible for leading the Mechanical team and ensuring all engineering concepts are delivered to the shop floor. Responsibilities: * Leading a team of AIT engineers on specific projects as well as planning the mechanical team's activities on a weekly basis. * Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A - E' * Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures, and test reports. * Control of all project MGSE, flight & support equipment * Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. * Alignment - producing test procedures and operating and maintaining optical alignment equipment. * Designing test equipment, overseeing its manufacture, and commissioning * Mechanical handling of spacecraft, instruments, payloads, solar arrays, antennas etc * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Install and validate test instrumentation. * Support propulsion testing * Handling and installation of thermal hardware * Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation associated with performing these tasks. * Pyrotechnic handling, installation, and safety * Plan and control the workload of the AIT team consisting of engineers and technicians. * Be able to travel overseas to work for short periods (typically 2-3 months, could be 6-7 months on occasions) * Be able to integrate quickly and easily into an AIT team. Experience required: * Appreciation of satellite integration processes and project phases * Use of SAP or other ERP System * Understanding of build documentation and the need for it * Driving build quality through review of processes and implementation of improvements * Managing a team during day-to-day activities ensuring work is completed on time and the correct standard. * Controlling and delivery of projects to budget and schedule * Face-to-face dealings with customers and suppliers * Worked in volatile, high-pressure environments to resolve technical and personnel conflicts. * Spacecraft Mechanical testing on prime projects is essential. * Leading other team members * Production of MGSE specs and operation of MGSE and flight HW * Production of high-quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
ARM (Advanced Resource Managers)
Bordon, Hampshire
A expanding airside client of ours who specialise is delivering turnkey projects to civil and defence airports and Civil Aviation Authorities worldwide. They are currently looking for a Project Manager to join the team and report directly into the Projects & Commercial Director. In the role you will be responsible for the non-technical aspects relating to the running of projects in order to effectively coordinate all contractual issues, Interoperation of engineering drawings to fault find & identify spare parts required. Your responsibilities will include: * Ensure that all contractual documentation is provided in accordance with the contract, in order to maintain quality of service at all times. * Ensure that all project management documentation is kept up to date and maintained in order to sustain quality of service at all times and frequent reporting to the Commercial and Projects Director. * Prepare, Deliver and Chair Project Meetings, working with the Project Engineer to produce Agendas, Presentations, Documents for discussion, Actions and Minutes as required. * Liaise with the Office Administrator in raising Purchase Orders for the necessary equipment. * Provision of all information to enable Sales Invoices to be raised. * Production of all schedules and documentation, including MIR Documents, Field Services Planning Documents and initiation of any amendments to the Scope of Supply in a timely manner. What they are looking for. * Project Management or Co-ordinating experience is essential. * Experience with Construction Design Management Regulations * Ability to exercise skill & judgement to immediate and medium-term contractual problems. * Preferred certification in project management methodologies (PRINCE2, APM, PMI, CSM, IAPM) demonstrating a strong foundation in project management principles and best practices. Other relevant information * It is the responsibility of the individual to ensure that all appropriate steps are taken to facilitate travel (With notice) anywhere in the world which means that passports and vaccinations etc. should always be up to date. * This position is offered subject to security clearance via Disclosure Scotland. * Applicants must have eligibility to live and work in the UK. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
03/05/2024
Full time
A expanding airside client of ours who specialise is delivering turnkey projects to civil and defence airports and Civil Aviation Authorities worldwide. They are currently looking for a Project Manager to join the team and report directly into the Projects & Commercial Director. In the role you will be responsible for the non-technical aspects relating to the running of projects in order to effectively coordinate all contractual issues, Interoperation of engineering drawings to fault find & identify spare parts required. Your responsibilities will include: * Ensure that all contractual documentation is provided in accordance with the contract, in order to maintain quality of service at all times. * Ensure that all project management documentation is kept up to date and maintained in order to sustain quality of service at all times and frequent reporting to the Commercial and Projects Director. * Prepare, Deliver and Chair Project Meetings, working with the Project Engineer to produce Agendas, Presentations, Documents for discussion, Actions and Minutes as required. * Liaise with the Office Administrator in raising Purchase Orders for the necessary equipment. * Provision of all information to enable Sales Invoices to be raised. * Production of all schedules and documentation, including MIR Documents, Field Services Planning Documents and initiation of any amendments to the Scope of Supply in a timely manner. What they are looking for. * Project Management or Co-ordinating experience is essential. * Experience with Construction Design Management Regulations * Ability to exercise skill & judgement to immediate and medium-term contractual problems. * Preferred certification in project management methodologies (PRINCE2, APM, PMI, CSM, IAPM) demonstrating a strong foundation in project management principles and best practices. Other relevant information * It is the responsibility of the individual to ensure that all appropriate steps are taken to facilitate travel (With notice) anywhere in the world which means that passports and vaccinations etc. should always be up to date. * This position is offered subject to security clearance via Disclosure Scotland. * Applicants must have eligibility to live and work in the UK. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Middleware Engineer - IBM MQ/RabbitMQ - Hybrid EU Remote, Middleware, Production Support, Message Queues (IBM MQ/RabbitMQ preferred), Linux, ITIL, CI/CD, PL/SQL. Any PCF, Groovy and Gitbucket are desirable. You will be required to be in their Dublin office up to 2 times/twice a week for meetings etc so this will require someone local to Dublin. *MQ (IBM/Rabbit) experience is mandatory - monitoring, configuration, creating, setting up MQs.* An agile and next-generation digital accelerating company providing digital transformation and technology services are looking for a Middleware Engineer with Message Queues (MQ) ideally IBM MQ or RabbitMQ. They work across a variety of industries, including banking & financial services, insurance, retail, higher education, food, healthcare, and manufacturing. Responsibilities Engage in and improve the whole life cycle of services - from inception and design, through deployment, operation, and refinement. Analyse ITSM activities of the platform and provide feedback loop to development teams on operational gaps or resiliency concerns. Support services before they go live through activities such as system design consulting, capacity planning and launch reviews. Maintain services once they are live by measuring and monitoring availability, latency, and overall system health with automated alerts. Scale systems sustainably through mechanisms like automation and evolve systems by pushing for changes that improve reliability and velocity. Practice sustainable incident response and detailed post mortems. Take a holistic approach to problem solving, by connecting the dots during a production event through the various technology stack that makes up the platform, to optimize mean time to recover. Dublin based, Middleware, Message Queues (IBM MQ/RabbitMQ preferred), Linux, ITIL, CI/CD, PL/SQL. Any PCF, Groovy and Gitbucket are desirable.
03/05/2024
Full time
Middleware Engineer - IBM MQ/RabbitMQ - Hybrid EU Remote, Middleware, Production Support, Message Queues (IBM MQ/RabbitMQ preferred), Linux, ITIL, CI/CD, PL/SQL. Any PCF, Groovy and Gitbucket are desirable. You will be required to be in their Dublin office up to 2 times/twice a week for meetings etc so this will require someone local to Dublin. *MQ (IBM/Rabbit) experience is mandatory - monitoring, configuration, creating, setting up MQs.* An agile and next-generation digital accelerating company providing digital transformation and technology services are looking for a Middleware Engineer with Message Queues (MQ) ideally IBM MQ or RabbitMQ. They work across a variety of industries, including banking & financial services, insurance, retail, higher education, food, healthcare, and manufacturing. Responsibilities Engage in and improve the whole life cycle of services - from inception and design, through deployment, operation, and refinement. Analyse ITSM activities of the platform and provide feedback loop to development teams on operational gaps or resiliency concerns. Support services before they go live through activities such as system design consulting, capacity planning and launch reviews. Maintain services once they are live by measuring and monitoring availability, latency, and overall system health with automated alerts. Scale systems sustainably through mechanisms like automation and evolve systems by pushing for changes that improve reliability and velocity. Practice sustainable incident response and detailed post mortems. Take a holistic approach to problem solving, by connecting the dots during a production event through the various technology stack that makes up the platform, to optimize mean time to recover. Dublin based, Middleware, Message Queues (IBM MQ/RabbitMQ preferred), Linux, ITIL, CI/CD, PL/SQL. Any PCF, Groovy and Gitbucket are desirable.
JOB: Working across an Assets and Connections Portfolio, the successful candidate will be responsible for producing and assuring high quality electrical and circuit designs to an agreed scope. Designs to be delivered to cost, time and quality targets. All designs must meet design and CDM standards. These designs could be for APP and/or Connections (non-contestable and contestable) work. The successful candidate will be expected to work as part of a multi-disciplinary team, delivering design technical excellence by ensuring compliance to design, CDM and relevant standards for the regulated network solutions for all APP and Connection schemes. ACCOUNTABILITIES: Production of Electrical Designs and circuit designs (below ground and in air) that can be constructed in compliance with standards and CDM requirements with no supervision and assure others designs. Deliver effective designs, which conform to all relevant Codes of Practice and company and industry standards, in conjunction with Electrical Design. Contribute to the production of technical, commercial and contractual documents for procurement of engineering products. Ensure compliance with all relevant legislation, regulations, and company procedures. Compliance with design assurance and audit processes Preparation of concept and developed design, from specifications and drawings within defined periods. Provide an excellent service to the customer. Work as a Team Player within larger multi-disciplinary teams. Liaise with the operational teams to ensure a smooth process from initial enquiry through to final energisation and project closure. Complying with the requirements of the designer/principal designer as determined by the 2015 CDM Regulations. Ensure design eliminates any hazards which may give rise to risks; and reduce risks from any remaining hazards (in conjunction with CDM). Ensure solutions provide sufficient information about aspects of the design of the network, its construction and maintenance as will adequately assist clients, the CDM team, other designers, and contractors. Supporting and mentoring other members of the team to enhance their technical knowledge and experience. SKILLS, QUALIFICATIONS AND EXPERIENCE: Strong Electrical engineering background and experience in electrical engineering. Knowledge of power system and protection design at 132KV, 33KV, 11KV, and intermediate voltages. Electrical/Circuit Engineering degree or STEM equivalent with proven relevant Electrical/Cable/OHL and substation design experience. Circuit engineering background and extensive experience in EHV circuit design and construction works, ideally within Utility sector. Competence in resolving circuit network issues and ability to provide a sound understanding of company standards and policies and their application to this role. Awareness of current and technological developments in circuit engineering. Extensive Knowledge of design processes and relevant DNO, ENA and International Design Standards including relevant operational aspects to successfully deliver designs. Ability to work with external engineering organisations and customers/stakeholders representing UKPN to best effect. Capable to sign off the designs. A good safety culture and sound understanding of Construction Design and Management (CDM) Regulations and their application in this role. Ability to work unsupervised, set and comply with own targets, and identify and implement innovative cost saving solutions. Good team working skills. A good level of business, environmental, safety, financial, and regulatory awareness. A general appreciation of financial reporting systems. Knowledge of the ISO 9001:2000 and ISO 14001 procedures relevant to the team's activities. Manage (not line manage) and communicate with the CAD team to produce design drawings suitable for construction. Experience of undertaking cable sizing/rating calculations for 11kV up to 132kV networks, for both solidly and cross bonded circuits (including de-rating aspects and short circuit loadings). Experience of undertaking cable pulling calculations for 11kV up to 132kV networks, in line with company standards. Experience in designing joint/pulling bays from 11kV up to 132kV. Experience in designing pilot/fibre cable routes, including splice chambers. Experience in terminations to indoor/outdoor switchgear/cable sealing ends. Experience in route proving, to determine the most cost effective and safest route install. Experience of directional drills and ability to advise/assure requirements accordingly. Excellent communication and organizational skills required, especially in relation to dealing with survey companies to obtain utility search information. Experience with producing Bills of Materials, particularly cable drum lengths, in coordination with pulling calculations. Liaise with Wayleaves and Consents to determine most feasible route. Knowledge of project management. Proficient in the use of Microsoft desktop applications, in particular: Word, Excel, and PowerPoint. Strong interpersonal skills and be competent in written and oral communications. Proficient in the use of AutoCAD and or Micro station. Awareness of current and technological developments in distribution plant and equipment. Input into innovative construction ideas and techniques, which feed into UK Power Networks Green Action Plan. Chartered Engineer or working towards achieving Chartership. PACKAGE: £70,000 - £78,132 - + car + London Allowance + bonus + benefit Annual Leave Personal Pension Plan - Personal contribution rates of 4% or 5% (UK Power Networks will make a corresponding contribution of 8% or 10%) Tenancy Loan Deposit scheme Tax efficient benefits: cycle to work scheme Season ticket loan Occupational Health support Switched On - scheme providing discount on hundreds of retailers products. Discounted access to sports and social clubs Employee Assistance Programme
03/05/2024
Full time
JOB: Working across an Assets and Connections Portfolio, the successful candidate will be responsible for producing and assuring high quality electrical and circuit designs to an agreed scope. Designs to be delivered to cost, time and quality targets. All designs must meet design and CDM standards. These designs could be for APP and/or Connections (non-contestable and contestable) work. The successful candidate will be expected to work as part of a multi-disciplinary team, delivering design technical excellence by ensuring compliance to design, CDM and relevant standards for the regulated network solutions for all APP and Connection schemes. ACCOUNTABILITIES: Production of Electrical Designs and circuit designs (below ground and in air) that can be constructed in compliance with standards and CDM requirements with no supervision and assure others designs. Deliver effective designs, which conform to all relevant Codes of Practice and company and industry standards, in conjunction with Electrical Design. Contribute to the production of technical, commercial and contractual documents for procurement of engineering products. Ensure compliance with all relevant legislation, regulations, and company procedures. Compliance with design assurance and audit processes Preparation of concept and developed design, from specifications and drawings within defined periods. Provide an excellent service to the customer. Work as a Team Player within larger multi-disciplinary teams. Liaise with the operational teams to ensure a smooth process from initial enquiry through to final energisation and project closure. Complying with the requirements of the designer/principal designer as determined by the 2015 CDM Regulations. Ensure design eliminates any hazards which may give rise to risks; and reduce risks from any remaining hazards (in conjunction with CDM). Ensure solutions provide sufficient information about aspects of the design of the network, its construction and maintenance as will adequately assist clients, the CDM team, other designers, and contractors. Supporting and mentoring other members of the team to enhance their technical knowledge and experience. SKILLS, QUALIFICATIONS AND EXPERIENCE: Strong Electrical engineering background and experience in electrical engineering. Knowledge of power system and protection design at 132KV, 33KV, 11KV, and intermediate voltages. Electrical/Circuit Engineering degree or STEM equivalent with proven relevant Electrical/Cable/OHL and substation design experience. Circuit engineering background and extensive experience in EHV circuit design and construction works, ideally within Utility sector. Competence in resolving circuit network issues and ability to provide a sound understanding of company standards and policies and their application to this role. Awareness of current and technological developments in circuit engineering. Extensive Knowledge of design processes and relevant DNO, ENA and International Design Standards including relevant operational aspects to successfully deliver designs. Ability to work with external engineering organisations and customers/stakeholders representing UKPN to best effect. Capable to sign off the designs. A good safety culture and sound understanding of Construction Design and Management (CDM) Regulations and their application in this role. Ability to work unsupervised, set and comply with own targets, and identify and implement innovative cost saving solutions. Good team working skills. A good level of business, environmental, safety, financial, and regulatory awareness. A general appreciation of financial reporting systems. Knowledge of the ISO 9001:2000 and ISO 14001 procedures relevant to the team's activities. Manage (not line manage) and communicate with the CAD team to produce design drawings suitable for construction. Experience of undertaking cable sizing/rating calculations for 11kV up to 132kV networks, for both solidly and cross bonded circuits (including de-rating aspects and short circuit loadings). Experience of undertaking cable pulling calculations for 11kV up to 132kV networks, in line with company standards. Experience in designing joint/pulling bays from 11kV up to 132kV. Experience in designing pilot/fibre cable routes, including splice chambers. Experience in terminations to indoor/outdoor switchgear/cable sealing ends. Experience in route proving, to determine the most cost effective and safest route install. Experience of directional drills and ability to advise/assure requirements accordingly. Excellent communication and organizational skills required, especially in relation to dealing with survey companies to obtain utility search information. Experience with producing Bills of Materials, particularly cable drum lengths, in coordination with pulling calculations. Liaise with Wayleaves and Consents to determine most feasible route. Knowledge of project management. Proficient in the use of Microsoft desktop applications, in particular: Word, Excel, and PowerPoint. Strong interpersonal skills and be competent in written and oral communications. Proficient in the use of AutoCAD and or Micro station. Awareness of current and technological developments in distribution plant and equipment. Input into innovative construction ideas and techniques, which feed into UK Power Networks Green Action Plan. Chartered Engineer or working towards achieving Chartership. PACKAGE: £70,000 - £78,132 - + car + London Allowance + bonus + benefit Annual Leave Personal Pension Plan - Personal contribution rates of 4% or 5% (UK Power Networks will make a corresponding contribution of 8% or 10%) Tenancy Loan Deposit scheme Tax efficient benefits: cycle to work scheme Season ticket loan Occupational Health support Switched On - scheme providing discount on hundreds of retailers products. Discounted access to sports and social clubs Employee Assistance Programme
Engineering Manager/Platform Lead You will be joining Platforms team within Enterprise Digital and be responsible for one or two squads whose goal is to make life for the development teams in other parts of the business easier by providing a set of low friction, fully managed cloud capabilities and abstracting these complexities away from the developer - allowing them to focus on code and not infrastructure. Your squads will focus on building IAC (Infrastructure as Code) using non-traditional tools such as Pulumi and implementing capabilities that allow developers to develop and deploy to the cloud faster and securely. And as a hands-on Engineering Manager, your code will lead by example and your teams will look up to you for strategic and technical leadership. You will be a confident solutions designer, able to communicate complex ideas clearly at various levels of the organization and skilled in working with multi-skilled teams to come up with workable solutions You will be a great collaborator working with your counterparts and other Engineering Managers within other Platform teams to ensure that our cloud capabilities are first class and provide the best experience to developers each day. You and your teams will also collaborate closely with engineering teams across the tribes -understanding their requirements and building out capabilities to support it. What you will be doing Lead, grow and hire a team of engineers that develop best-in-breed tooling and IAC capabilities that allow developers to go from idea to production in 12 minutes or less Create and Lead strategy for a roadmap that caters to the needs of the business and developers. Remove manual implementation from workflows and look to automate as much as possible. Provide mentorship and career support for the members of your teams - maximising their potential. Agile champion for your teams, taking pride in a metrics-based organisation that looks to continually improve itself. Skills A fast learner - Our work within Platforms is varied and we work across the full developer life cycle. Passion for automation with a reluctance for manual implementation 4+ years of experience in building software products in Typescript. Java is a bonus. 2+ years of experience in a team leadership position where you were responsible for career growth and mentorship of team members. An appreciation for working in the cloud and an understanding of cloud principles. We will provide opportunities for AWS training, but bonus points for already having that experience. 3+ years of experience with agile systems development methodologies 3+ years' experience with cloud computing on AWS. Bonus is experience with DevOps tools, process and culture. Benefits Competitive salary 25 days annual leave (plus bank holidays) 10% on target bonus Life Assurance Pension scheme
03/05/2024
Full time
Engineering Manager/Platform Lead You will be joining Platforms team within Enterprise Digital and be responsible for one or two squads whose goal is to make life for the development teams in other parts of the business easier by providing a set of low friction, fully managed cloud capabilities and abstracting these complexities away from the developer - allowing them to focus on code and not infrastructure. Your squads will focus on building IAC (Infrastructure as Code) using non-traditional tools such as Pulumi and implementing capabilities that allow developers to develop and deploy to the cloud faster and securely. And as a hands-on Engineering Manager, your code will lead by example and your teams will look up to you for strategic and technical leadership. You will be a confident solutions designer, able to communicate complex ideas clearly at various levels of the organization and skilled in working with multi-skilled teams to come up with workable solutions You will be a great collaborator working with your counterparts and other Engineering Managers within other Platform teams to ensure that our cloud capabilities are first class and provide the best experience to developers each day. You and your teams will also collaborate closely with engineering teams across the tribes -understanding their requirements and building out capabilities to support it. What you will be doing Lead, grow and hire a team of engineers that develop best-in-breed tooling and IAC capabilities that allow developers to go from idea to production in 12 minutes or less Create and Lead strategy for a roadmap that caters to the needs of the business and developers. Remove manual implementation from workflows and look to automate as much as possible. Provide mentorship and career support for the members of your teams - maximising their potential. Agile champion for your teams, taking pride in a metrics-based organisation that looks to continually improve itself. Skills A fast learner - Our work within Platforms is varied and we work across the full developer life cycle. Passion for automation with a reluctance for manual implementation 4+ years of experience in building software products in Typescript. Java is a bonus. 2+ years of experience in a team leadership position where you were responsible for career growth and mentorship of team members. An appreciation for working in the cloud and an understanding of cloud principles. We will provide opportunities for AWS training, but bonus points for already having that experience. 3+ years of experience with agile systems development methodologies 3+ years' experience with cloud computing on AWS. Bonus is experience with DevOps tools, process and culture. Benefits Competitive salary 25 days annual leave (plus bank holidays) 10% on target bonus Life Assurance Pension scheme
SAP Production Planning/Quality Management Consultant SAP PP/QM Consultant - ASAP Start - 800-900/day - 3 days a week on site in Austria This role would be an 18 month contract- but chance of extension is still very likely. It would involve rolling out/implementing an already configured SAP template across Europe 3 days a week on site, but this is negotiable. GxP experience is a bonus We are looking for a talented SAP PP/QM (Production Planning/Quality Management) Consultant to join our team and assist in the rollout and implementation of SAP PP/QM modules across multiple countries. In this role, you will work closely with business stakeholders to understand their production planning and quality management requirements and configure SAP systems to meet their needs efficiently. Key Responsibilities: Implementation Planning: Collaborate with project managers and business stakeholders to develop implementation strategies and plans for SAP PP/QM modules rollout in various countries. Configuration: Utilize your expertise in SAP PP/QM modules to configure the system based on business requirements. This includes setting up production planning processes, defining master data, configuring quality management processes, and establishing inspection plans. Customization: Customize SAP PP/QM functionalities as needed to address specific business requirements, ensuring alignment with global template standards and best practices. Integration: Work on integrating SAP PP/QM modules with other SAP modules (such as MM, SD, PM) and external systems to ensure seamless data flow and process integration across the organization. Testing: Conduct comprehensive testing of SAP PP/QM configurations and customizations to validate system functionality and ensure it meets business needs. Identify and resolve any issues or gaps identified during testing. Training and Documentation: Develop and deliver training sessions for end-users on SAP PP/QM functionality and processes. Create training materials and documentation to support the rollout and ongoing use of SAP systems. Support and Maintenance: Provide post-implementation support to address user inquiries, troubleshoot issues, and resolve system-related problems related to SAP PP/QM modules. Collaborate with support teams to ensure timely resolution of issues and continuous system improvement. Continuous Improvement: Proactively identify opportunities for process improvement within SAP PP/QM modules. Recommend and implement enhancements to optimize production planning and quality management processes, driving efficiency and effectiveness. Qualifications: Bachelor's degree in Engineering, Computer Science, Business Administration, or related field. Extensive experience (X years) working as an SAP PP/QM Consultant, with a focus on implementation projects. Strong knowledge of SAP PP/QM modules, including configuration, customization, and integration with other SAP modules. Experience working on international projects with a multi-country rollout is preferred. Excellent analytical and problem-solving skills, with the ability to understand complex business processes and translate them into SAP solutions. Exceptional communication and interpersonal skills, with the ability to collaborate effectively with diverse teams and stakeholders. SAP certification in PP/QM modules is a plus. SAP PP/QM Consultant - ASAP Start - 800- 900/day - 3 days a week on site in Austria- Must be German speaking bluewaveSELECT is a global recruitment business that is exclusively focused on SAP. Involved in placing over 4,000 SAP professionals, our team has helped deliver some of the highest-profile SAP programmes for some of the most recognisable brands all over of the world. We are on a mission is to become the world's most trusted SAP recruitment business, delivering our unique wow factor by consistently exceeding expectations for both our customers and our network of SAP professionals. We are an official SAP partner, you will find us on the Ariba Network and we have a 5-Star approval rating on TrustPilot from fellow SAP enthusiasts. Whether this will be your first experience with us, or you are a bluewaveSELECT regular, we look forward to working with you! Disclaimer; We try and contact all applicants to every advert however due to volumes of responses with some adverts we may not be able to get back to you in some cases. If this is the case and you do not hear from us within 5 working days please take it that your application has been unsuccessful. Please note, your profile will be rejected if you do not meet language/legislation criteria. Thank you.
03/05/2024
Project-based
SAP Production Planning/Quality Management Consultant SAP PP/QM Consultant - ASAP Start - 800-900/day - 3 days a week on site in Austria This role would be an 18 month contract- but chance of extension is still very likely. It would involve rolling out/implementing an already configured SAP template across Europe 3 days a week on site, but this is negotiable. GxP experience is a bonus We are looking for a talented SAP PP/QM (Production Planning/Quality Management) Consultant to join our team and assist in the rollout and implementation of SAP PP/QM modules across multiple countries. In this role, you will work closely with business stakeholders to understand their production planning and quality management requirements and configure SAP systems to meet their needs efficiently. Key Responsibilities: Implementation Planning: Collaborate with project managers and business stakeholders to develop implementation strategies and plans for SAP PP/QM modules rollout in various countries. Configuration: Utilize your expertise in SAP PP/QM modules to configure the system based on business requirements. This includes setting up production planning processes, defining master data, configuring quality management processes, and establishing inspection plans. Customization: Customize SAP PP/QM functionalities as needed to address specific business requirements, ensuring alignment with global template standards and best practices. Integration: Work on integrating SAP PP/QM modules with other SAP modules (such as MM, SD, PM) and external systems to ensure seamless data flow and process integration across the organization. Testing: Conduct comprehensive testing of SAP PP/QM configurations and customizations to validate system functionality and ensure it meets business needs. Identify and resolve any issues or gaps identified during testing. Training and Documentation: Develop and deliver training sessions for end-users on SAP PP/QM functionality and processes. Create training materials and documentation to support the rollout and ongoing use of SAP systems. Support and Maintenance: Provide post-implementation support to address user inquiries, troubleshoot issues, and resolve system-related problems related to SAP PP/QM modules. Collaborate with support teams to ensure timely resolution of issues and continuous system improvement. Continuous Improvement: Proactively identify opportunities for process improvement within SAP PP/QM modules. Recommend and implement enhancements to optimize production planning and quality management processes, driving efficiency and effectiveness. Qualifications: Bachelor's degree in Engineering, Computer Science, Business Administration, or related field. Extensive experience (X years) working as an SAP PP/QM Consultant, with a focus on implementation projects. Strong knowledge of SAP PP/QM modules, including configuration, customization, and integration with other SAP modules. Experience working on international projects with a multi-country rollout is preferred. Excellent analytical and problem-solving skills, with the ability to understand complex business processes and translate them into SAP solutions. Exceptional communication and interpersonal skills, with the ability to collaborate effectively with diverse teams and stakeholders. SAP certification in PP/QM modules is a plus. SAP PP/QM Consultant - ASAP Start - 800- 900/day - 3 days a week on site in Austria- Must be German speaking bluewaveSELECT is a global recruitment business that is exclusively focused on SAP. Involved in placing over 4,000 SAP professionals, our team has helped deliver some of the highest-profile SAP programmes for some of the most recognisable brands all over of the world. We are on a mission is to become the world's most trusted SAP recruitment business, delivering our unique wow factor by consistently exceeding expectations for both our customers and our network of SAP professionals. We are an official SAP partner, you will find us on the Ariba Network and we have a 5-Star approval rating on TrustPilot from fellow SAP enthusiasts. Whether this will be your first experience with us, or you are a bluewaveSELECT regular, we look forward to working with you! Disclaimer; We try and contact all applicants to every advert however due to volumes of responses with some adverts we may not be able to get back to you in some cases. If this is the case and you do not hear from us within 5 working days please take it that your application has been unsuccessful. Please note, your profile will be rejected if you do not meet language/legislation criteria. Thank you.
World Class Defence Organisation based in Bristol is currently looking to recruit 7x C++/Java Software Engineer subcontractors on an initial 6 month contract. The role will be onsite but a 4 day working week (Monday to Thursday) is OK. Contract Duration: 6 months initially and then ongoing Hourly Rate: £70.00ph (Umbrella) Essential: Knowledge of C++ or Core Java. Having both is desirable. Familiarity with a range of CI/CD/DevOps toolsets; Jira, GitHub, Jenkins in particular. Desirable: Knowledge includes, Java FX, QT, MISRA and Google Understanding of Linux command line. Python skills could help. Software Engineer C++ and Java Job Description: The Mission Planning and Control Software Department produce desktop solutions for planning activities on a range of weapon systems. We also facilitate the integration of products into third party planning applications. Other areas include; diagnostic and maintenance tools, and bespoke software components for launchers. Applicants must be highly proficient in C++ and/or Core Java. We are looking to recruit across various departmental activities including mission planning applications and launcher sub-systems. Responsibilities: In conjunction with the rest of the project team, participate in the design, development and proving activities for a launcher sub-system. To undertake a full range of engineering activities in line with relevant company processes and standards. Must be capable of taking ownership of features. The role includes system integration activities on a virtual test environment and potentially representative and deliverable hardware. Depending on the skills and experience of the engineer the role could potentially require involvement in the whole development life cycle from Architectural specification of the software product through to the testing and verification. The role will include supporting the production of project documentation. Skillset/experience required: A Software Engineer capable of design, development and proving of complex software products. The ability to communicate technical issues with other engineers and stakeholders from different skill areas. Experience operating as part of a collaborative Agile team. Knowledge of Software development practices and processes is required. Familiarity with a range of CI/CD/DevOps toolsets; Jira, GitHub, Jenkins in particular. Mandatory knowledge of C++ or Core Java. Having both is desirable Desirable knowledge includes, Java FX, QT, MISRA and Google Test.
03/05/2024
Project-based
World Class Defence Organisation based in Bristol is currently looking to recruit 7x C++/Java Software Engineer subcontractors on an initial 6 month contract. The role will be onsite but a 4 day working week (Monday to Thursday) is OK. Contract Duration: 6 months initially and then ongoing Hourly Rate: £70.00ph (Umbrella) Essential: Knowledge of C++ or Core Java. Having both is desirable. Familiarity with a range of CI/CD/DevOps toolsets; Jira, GitHub, Jenkins in particular. Desirable: Knowledge includes, Java FX, QT, MISRA and Google Understanding of Linux command line. Python skills could help. Software Engineer C++ and Java Job Description: The Mission Planning and Control Software Department produce desktop solutions for planning activities on a range of weapon systems. We also facilitate the integration of products into third party planning applications. Other areas include; diagnostic and maintenance tools, and bespoke software components for launchers. Applicants must be highly proficient in C++ and/or Core Java. We are looking to recruit across various departmental activities including mission planning applications and launcher sub-systems. Responsibilities: In conjunction with the rest of the project team, participate in the design, development and proving activities for a launcher sub-system. To undertake a full range of engineering activities in line with relevant company processes and standards. Must be capable of taking ownership of features. The role includes system integration activities on a virtual test environment and potentially representative and deliverable hardware. Depending on the skills and experience of the engineer the role could potentially require involvement in the whole development life cycle from Architectural specification of the software product through to the testing and verification. The role will include supporting the production of project documentation. Skillset/experience required: A Software Engineer capable of design, development and proving of complex software products. The ability to communicate technical issues with other engineers and stakeholders from different skill areas. Experience operating as part of a collaborative Agile team. Knowledge of Software development practices and processes is required. Familiarity with a range of CI/CD/DevOps toolsets; Jira, GitHub, Jenkins in particular. Mandatory knowledge of C++ or Core Java. Having both is desirable Desirable knowledge includes, Java FX, QT, MISRA and Google Test.
*We are unable to sponsor as this is a permanent Full time role* *Hybrid 3 days onsite 2 days remote* A prestigious company is looking for a Vendor Quality Assurance Manager. This manager will focus on managing all the outsourced vendors for all technical quality assurance. This manager will be managing 25-30 onshore and offshore resources. This includes QA for applications, datacenter, Back End technology, Microsoft products, etc. Responsibilities: Develop and implement specific QA tailored solutions for each production deliverable. Establish relationship and governance with internal and third-party team members to conduct Quality Assurance responsibilities. Oversee and manage a global QA team with diverse backgrounds supporting QA development, which may include one or more third-party organizations. Ensure that management and allocation of QA resources based on project needs is performed. Develop, implement, or enhance and institutionalize QA processes, including metrics/measurements, reporting, and continuous improvement, that balance risk and delivery timelines. Integrate required and suggested testing framework in the IT Technology Services organization. Staying up to date with current state-of-the-art testing practices, testing practices and testing tools Ensure that QA feedback is being used to improve deliverable life cycle processes. Works with project team members to design, develop, and execute test plans. May consult to project teams, Subject Matter Experts (SMEs), and Business Units to design and develop test plans, test cases, and execution procedures. Recommends appropriate test execution approach in consideration of cost, scope, and timeline of product/solution delivery. Identifies test execution metrics to project team members. Prepares and communicates test results and reports accurate testing status to project team members. Provides estimates of text execution to support project-level resource planning efforts. May be required to facilitate onboarding and off boarding of in-sourced and/or outsourced testing resources. Review others (team or cross team) executed test results and help determine issues and priorities. Create and maintain quality control artifacts and make available to teams within and outside of IT. Adheres to industry and Firmwide IT specific quality engineering standards and processes. May be required to step in as a product manager for products that do not have an assigned Product Manager. Qualifications Bachelor's degree in Computer Science, Computer Engineering, Information Technology or equivalent experience. 10 years of experience in software development and software quality assurance. 3 years of experience working in Agile development process. 3 years of experience with performance and load testing. 3 years of experience in management of QA organization including management of third parties that are also delivering QA services. Proficiency with software QA methodologies, tools, and processes. Proficiency in project management. Encourages fiscal responsibility and maintains confidentiality. Technologies/Software Microsoft Office applications iDevice (Iphone/IPad) Communications: Avaya Telephone/Equinox, Zoom, TEAMS, SKYPE Test Management System: JIRA, ServiceNow, ADO Project Management: Eclipse/Microsoft Project SQL (Writing simple queries) Enterprise Management Systems, Finance, Human Resource, Time Tracking, Billing, Risk SharePoint
02/05/2024
Full time
*We are unable to sponsor as this is a permanent Full time role* *Hybrid 3 days onsite 2 days remote* A prestigious company is looking for a Vendor Quality Assurance Manager. This manager will focus on managing all the outsourced vendors for all technical quality assurance. This manager will be managing 25-30 onshore and offshore resources. This includes QA for applications, datacenter, Back End technology, Microsoft products, etc. Responsibilities: Develop and implement specific QA tailored solutions for each production deliverable. Establish relationship and governance with internal and third-party team members to conduct Quality Assurance responsibilities. Oversee and manage a global QA team with diverse backgrounds supporting QA development, which may include one or more third-party organizations. Ensure that management and allocation of QA resources based on project needs is performed. Develop, implement, or enhance and institutionalize QA processes, including metrics/measurements, reporting, and continuous improvement, that balance risk and delivery timelines. Integrate required and suggested testing framework in the IT Technology Services organization. Staying up to date with current state-of-the-art testing practices, testing practices and testing tools Ensure that QA feedback is being used to improve deliverable life cycle processes. Works with project team members to design, develop, and execute test plans. May consult to project teams, Subject Matter Experts (SMEs), and Business Units to design and develop test plans, test cases, and execution procedures. Recommends appropriate test execution approach in consideration of cost, scope, and timeline of product/solution delivery. Identifies test execution metrics to project team members. Prepares and communicates test results and reports accurate testing status to project team members. Provides estimates of text execution to support project-level resource planning efforts. May be required to facilitate onboarding and off boarding of in-sourced and/or outsourced testing resources. Review others (team or cross team) executed test results and help determine issues and priorities. Create and maintain quality control artifacts and make available to teams within and outside of IT. Adheres to industry and Firmwide IT specific quality engineering standards and processes. May be required to step in as a product manager for products that do not have an assigned Product Manager. Qualifications Bachelor's degree in Computer Science, Computer Engineering, Information Technology or equivalent experience. 10 years of experience in software development and software quality assurance. 3 years of experience working in Agile development process. 3 years of experience with performance and load testing. 3 years of experience in management of QA organization including management of third parties that are also delivering QA services. Proficiency with software QA methodologies, tools, and processes. Proficiency in project management. Encourages fiscal responsibility and maintains confidentiality. Technologies/Software Microsoft Office applications iDevice (Iphone/IPad) Communications: Avaya Telephone/Equinox, Zoom, TEAMS, SKYPE Test Management System: JIRA, ServiceNow, ADO Project Management: Eclipse/Microsoft Project SQL (Writing simple queries) Enterprise Management Systems, Finance, Human Resource, Time Tracking, Billing, Risk SharePoint
Skills required: Experience within renewables industry, energy storage either in consultancy, DNO, ICP, renewable energy developer, or alternatively another engineering environment Knowledge and understanding of international and UK standards Knowledge of AutoCAD Experience in Solar PV design requirements (desirable) Familiarity with the interactions between developer, EPC and TA in utility-scale PV project development Knowledge of Energy Storage Systems (desirable) Experience with CDM regulations (desirable Key Responsibilities: Production of Civil and Structural Designs that can be constructed in compliance with standards and CDM requirements Evaluation of civil works requirements for solar installations (concrete foundations, piling programs, internal road design ) Review of existing studies and surveys and define scope as per projects' needs and specifications (flood risk assessment, load bearing survey, archaeological protection measures, geotechnical, topography, hydrology, hydraulics ) Reading design specifications, employer's requirements and technical drawings Define detailed scope of works and specifications of Subcontractors for civil topics. Provide/coordinate preliminary civil designs (cut and fill analysis, Gravel roads, drainage, etc.) based on the project type, location and needs. Review and acceptance of engineering designs from external parties. Review and acceptance of the submitted engineering reports, ensuring their conformity with the agreed scope, and communicate the engineering design parameters to the internal departments (structural, AC/DC, etc). Providing engineering and technical expertise and guidance in identifying, analysing and resolving project challenges Support the construction department in the implementation, during the project realization phase Create and maintain a pool of qualified outsourcing services able to provide engineering services (designs, testing, assessments, etc.) Work as the main contact point in communication and coordination of technical matters between Belectric and the civil outsourcing services. Provide technical support and expertise in civil topics with the client engineering team and technical consultants. Close exchange with colleagues in layout design, purchasing, project development, project management and the subsidiaries ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
02/05/2024
Full time
Skills required: Experience within renewables industry, energy storage either in consultancy, DNO, ICP, renewable energy developer, or alternatively another engineering environment Knowledge and understanding of international and UK standards Knowledge of AutoCAD Experience in Solar PV design requirements (desirable) Familiarity with the interactions between developer, EPC and TA in utility-scale PV project development Knowledge of Energy Storage Systems (desirable) Experience with CDM regulations (desirable Key Responsibilities: Production of Civil and Structural Designs that can be constructed in compliance with standards and CDM requirements Evaluation of civil works requirements for solar installations (concrete foundations, piling programs, internal road design ) Review of existing studies and surveys and define scope as per projects' needs and specifications (flood risk assessment, load bearing survey, archaeological protection measures, geotechnical, topography, hydrology, hydraulics ) Reading design specifications, employer's requirements and technical drawings Define detailed scope of works and specifications of Subcontractors for civil topics. Provide/coordinate preliminary civil designs (cut and fill analysis, Gravel roads, drainage, etc.) based on the project type, location and needs. Review and acceptance of engineering designs from external parties. Review and acceptance of the submitted engineering reports, ensuring their conformity with the agreed scope, and communicate the engineering design parameters to the internal departments (structural, AC/DC, etc). Providing engineering and technical expertise and guidance in identifying, analysing and resolving project challenges Support the construction department in the implementation, during the project realization phase Create and maintain a pool of qualified outsourcing services able to provide engineering services (designs, testing, assessments, etc.) Work as the main contact point in communication and coordination of technical matters between Belectric and the civil outsourcing services. Provide technical support and expertise in civil topics with the client engineering team and technical consultants. Close exchange with colleagues in layout design, purchasing, project development, project management and the subsidiaries ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
Mechaniker (m/w/d) - GMP/ Prozessanlagen / Validierung /Automation/ Pikett Projekt: Für unseren Kunden, ein grosses Pharmaunternehmen mit Sitz in Kaiseraugst suchen wir 16-18 Elektriker , Automatiker und Mechaniker (m/w/d) Hintergrund : Der moderne Produktionsbetrieb für Parenteralia in Kaiseraugst (PKau) ist verantwortlich für die Herstellung steriler Arzneimittel und beliefert den weltweiten Markt mit biopharmazeutischen Arzneimittelprodukten. An der Gefriertrocknungslinie (GEF) werden vorgefertigte Lösungen aseptisch abgefüllt und anschließend lyophilisiert. Die Linie verfügt über eigene Kapazitäten zum Auftauen/Einfrieren und für die Ansatzherstellung (Compounding).Als Mechaniker (m/w/d) sind Sie Bestandteil des Instandhaltungs-Teams des Wertstrom-Speed und sind dem Technical Unit Lead unterstellt.In Ihrer Rolle arbeiten Sie eng mit den produzierenden Einheiten im Wertstrom und den lokalen Schnittstellen zusammen. Die Bereitschaft zu bereichsübergreifender Arbeit ist selbstverständlich. Sie sind als Teamplayer offen für Neues, bringen eine agile und kreative Denkweise mit, arbeiten lösungsorientiert, haben ein open Mindset" und den End to End" Gedanken. Der oder die perfekte Kandidat:in hat eine abgeschlossene technische Ausbildung als Mechaniker und mindestens 3 Jahre Berufserfahrung vorzugsweise in der pharmazeutischen Produktion sowie verfügt über fliessende Deutschkenntnisse. Aufgaben: * Sie sind für die mechanische Verfügbarkeit der Prozessanlagen, inkl. Produktionsbetreuung, Störungsbehebung, Wartung. Problemlösung zuständig (First Level Support) . Fachgerechte Behebung von auftretenden Störungen an hochautomatisierten Anlagen . Erkennen, analysieren und beheben von Störungen im Ablauf von komplexen Steuerungen . Mithilfe bei der Erhöhung der Anlagenverfügbarkeit . Fachgerechte und selbständige Durchführung von geplanten Instandhaltungstätigkeiten . Fachgerechte und selbstständige Durchführung der Formatwechsel an den Prozessanlagen . Sicheres Arbeiten im GMP-Umfeld, u.a. im Reinraum . GMP-gerechte Dokumentation der durchgeführten Instandhaltungstätigkeiten . Unterstützung bei Validierungs-und Qualifizierungstätigkeiten . Schulen von Mitarbeitern im Umgang mit den Anlagen . Unterstützung der Schnittstellen, insbesondere des Betriebs-und Automation Engineerings . Selbstständiges Erarbeiten und ausführen kleinerer Anlagen Optimierungen unter Einhaltung des Change Management" . Mitarbeit und Umsetzung von kontinuierlichen Verbesserungsmaßnahmen (KVP) . Mitarbeit und Unterstützung bei der Verwaltung von Ersatz- und Verschleißteilen . Bereitschaft zum Schichtbetrieb (2-Schichtbetrieb, 3-Schichtbetrieb (kontinuierlich) und 5-Schichtbetrieb (vollkontinuierlich im 6/4-Modell) . Bereitschaft zum Pikettdienst Must Haves: * Abgeschlossene technische Ausbildung als Mechaniker . Mind. 3 Jahre Berufserfahrung idealerweise in der pharmazeutischen Produktion oder in einem stark regulierten Umfeld . Sichere Anwendung von Standard PC-Programmen ( MS Office und Google) . Kenntnisse im SAP-PM-Modul sind von Vorteil . Sehr gute Sprachkenntnisse in Deutsch in Wort und Schrift . Sie bringen neben dem technischen Verständnis eine eigenständige, kommunikative, belastbare und flexible Persönlichkeit mit, haben Freude an selbständiger Arbeit, übernehmen Verantwortung und arbeiten gerne in einem Team * Sie können vorausschauend Denken und Handeln und haben ausgeprägte Fähigkeiten im konzeptionellen Bereich * Exakte und zuverlässige Arbeitsweise auch unter zeitlicher Belastung Nice to haves: . Eine Weiterbildung zum Meister ist von Vorteil . Englischkenntnisse von Vorteil . LPS (Lean Production System) Kenntnisse von Vorteil Reference No.: 923415TP Rolle: Mechaniker Industry: Pharma Location: Kaiseraugst Workload: 100% Start: 01.07.2024 Duration: 24 Deadline : 20.05.2024 Sollte diese Position Ihr Interesse geweckt haben, senden Sie uns bitte Ihr komplettes Dossier via dem Link in dieser Anzeige zu. Über uns: ITech Consult ist ein nach ISO 9001:2015 zertifiziertes Schweizer Unternehmen mit Niederlassungen in Deutschland und Irland. ITech Consult ist spezialisiert auf die Vermittlung von hochqualifizierten Kandidaten für den Personalverleih in den Bereichen IT, Life Science & Engineering. Wir bieten Personalverleih & Payroll Dienstleistungen an. Für unsere Kandidaten ist dies kostenlos, auch bei Payroll berechnen wir Ihnen keine zusätzlichen Gebühren.
02/05/2024
Project-based
Mechaniker (m/w/d) - GMP/ Prozessanlagen / Validierung /Automation/ Pikett Projekt: Für unseren Kunden, ein grosses Pharmaunternehmen mit Sitz in Kaiseraugst suchen wir 16-18 Elektriker , Automatiker und Mechaniker (m/w/d) Hintergrund : Der moderne Produktionsbetrieb für Parenteralia in Kaiseraugst (PKau) ist verantwortlich für die Herstellung steriler Arzneimittel und beliefert den weltweiten Markt mit biopharmazeutischen Arzneimittelprodukten. An der Gefriertrocknungslinie (GEF) werden vorgefertigte Lösungen aseptisch abgefüllt und anschließend lyophilisiert. Die Linie verfügt über eigene Kapazitäten zum Auftauen/Einfrieren und für die Ansatzherstellung (Compounding).Als Mechaniker (m/w/d) sind Sie Bestandteil des Instandhaltungs-Teams des Wertstrom-Speed und sind dem Technical Unit Lead unterstellt.In Ihrer Rolle arbeiten Sie eng mit den produzierenden Einheiten im Wertstrom und den lokalen Schnittstellen zusammen. Die Bereitschaft zu bereichsübergreifender Arbeit ist selbstverständlich. Sie sind als Teamplayer offen für Neues, bringen eine agile und kreative Denkweise mit, arbeiten lösungsorientiert, haben ein open Mindset" und den End to End" Gedanken. Der oder die perfekte Kandidat:in hat eine abgeschlossene technische Ausbildung als Mechaniker und mindestens 3 Jahre Berufserfahrung vorzugsweise in der pharmazeutischen Produktion sowie verfügt über fliessende Deutschkenntnisse. Aufgaben: * Sie sind für die mechanische Verfügbarkeit der Prozessanlagen, inkl. Produktionsbetreuung, Störungsbehebung, Wartung. Problemlösung zuständig (First Level Support) . Fachgerechte Behebung von auftretenden Störungen an hochautomatisierten Anlagen . Erkennen, analysieren und beheben von Störungen im Ablauf von komplexen Steuerungen . Mithilfe bei der Erhöhung der Anlagenverfügbarkeit . Fachgerechte und selbständige Durchführung von geplanten Instandhaltungstätigkeiten . Fachgerechte und selbstständige Durchführung der Formatwechsel an den Prozessanlagen . Sicheres Arbeiten im GMP-Umfeld, u.a. im Reinraum . GMP-gerechte Dokumentation der durchgeführten Instandhaltungstätigkeiten . Unterstützung bei Validierungs-und Qualifizierungstätigkeiten . Schulen von Mitarbeitern im Umgang mit den Anlagen . Unterstützung der Schnittstellen, insbesondere des Betriebs-und Automation Engineerings . Selbstständiges Erarbeiten und ausführen kleinerer Anlagen Optimierungen unter Einhaltung des Change Management" . Mitarbeit und Umsetzung von kontinuierlichen Verbesserungsmaßnahmen (KVP) . Mitarbeit und Unterstützung bei der Verwaltung von Ersatz- und Verschleißteilen . Bereitschaft zum Schichtbetrieb (2-Schichtbetrieb, 3-Schichtbetrieb (kontinuierlich) und 5-Schichtbetrieb (vollkontinuierlich im 6/4-Modell) . Bereitschaft zum Pikettdienst Must Haves: * Abgeschlossene technische Ausbildung als Mechaniker . Mind. 3 Jahre Berufserfahrung idealerweise in der pharmazeutischen Produktion oder in einem stark regulierten Umfeld . Sichere Anwendung von Standard PC-Programmen ( MS Office und Google) . Kenntnisse im SAP-PM-Modul sind von Vorteil . Sehr gute Sprachkenntnisse in Deutsch in Wort und Schrift . Sie bringen neben dem technischen Verständnis eine eigenständige, kommunikative, belastbare und flexible Persönlichkeit mit, haben Freude an selbständiger Arbeit, übernehmen Verantwortung und arbeiten gerne in einem Team * Sie können vorausschauend Denken und Handeln und haben ausgeprägte Fähigkeiten im konzeptionellen Bereich * Exakte und zuverlässige Arbeitsweise auch unter zeitlicher Belastung Nice to haves: . Eine Weiterbildung zum Meister ist von Vorteil . Englischkenntnisse von Vorteil . LPS (Lean Production System) Kenntnisse von Vorteil Reference No.: 923415TP Rolle: Mechaniker Industry: Pharma Location: Kaiseraugst Workload: 100% Start: 01.07.2024 Duration: 24 Deadline : 20.05.2024 Sollte diese Position Ihr Interesse geweckt haben, senden Sie uns bitte Ihr komplettes Dossier via dem Link in dieser Anzeige zu. Über uns: ITech Consult ist ein nach ISO 9001:2015 zertifiziertes Schweizer Unternehmen mit Niederlassungen in Deutschland und Irland. ITech Consult ist spezialisiert auf die Vermittlung von hochqualifizierten Kandidaten für den Personalverleih in den Bereichen IT, Life Science & Engineering. Wir bieten Personalverleih & Payroll Dienstleistungen an. Für unsere Kandidaten ist dies kostenlos, auch bei Payroll berechnen wir Ihnen keine zusätzlichen Gebühren.
Job description Coating Technician, Full-Time on-site in Leicestershire. Up to 29K (plus Shift Allowance) (Shift Pattern: 06.00 - 14.00/14.00 - 22.00 - Monday - Friday). Possible weekend requirement. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Mission: To assist the coating department by using optical technological knowledge to help with production requirements to meet on-time-delivery requirements. Yield expectations. To stay competitive within the current market and to assist in new product development.To make recommendations for continuous process improvements and may instigate relevant development activity. Key Responsibilities Ability to measure and assess work on the appropriate spectrophotometers. Ability to identify potential coating problems in process and take appropriate corrective action. Ability to identify coating defects such as spatter, striae, delamination, lint marks, comet marks etc. and understand the possible causes and know the type of action to take to avoid their occurrence. Possesses a thorough understanding of relevant Surface Quality Specifications and how the above relates to them. Examine work prior to coating and be satisfied it is fit to coat. Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. Capable of stripping optics safely, observing Local Health and Safety rules. Identify potential problems with the coating plant/measuring equipment and alert the appropriate support staff. Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002. Competent to train colleagues on various aspects of the coating department. Education, Skills Abilities: Qualifications in Mathematics and Physics at least to GCSE or A l evel Computer literacy, including familiarity with Excel and Word The ability to analyse situations and results A good understanding of optical manufacture A good engineering background SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
02/05/2024
Full time
Job description Coating Technician, Full-Time on-site in Leicestershire. Up to 29K (plus Shift Allowance) (Shift Pattern: 06.00 - 14.00/14.00 - 22.00 - Monday - Friday). Possible weekend requirement. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Mission: To assist the coating department by using optical technological knowledge to help with production requirements to meet on-time-delivery requirements. Yield expectations. To stay competitive within the current market and to assist in new product development.To make recommendations for continuous process improvements and may instigate relevant development activity. Key Responsibilities Ability to measure and assess work on the appropriate spectrophotometers. Ability to identify potential coating problems in process and take appropriate corrective action. Ability to identify coating defects such as spatter, striae, delamination, lint marks, comet marks etc. and understand the possible causes and know the type of action to take to avoid their occurrence. Possesses a thorough understanding of relevant Surface Quality Specifications and how the above relates to them. Examine work prior to coating and be satisfied it is fit to coat. Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. Capable of stripping optics safely, observing Local Health and Safety rules. Identify potential problems with the coating plant/measuring equipment and alert the appropriate support staff. Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002. Competent to train colleagues on various aspects of the coating department. Education, Skills Abilities: Qualifications in Mathematics and Physics at least to GCSE or A l evel Computer literacy, including familiarity with Excel and Word The ability to analyse situations and results A good understanding of optical manufacture A good engineering background SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
Platform Engineer - Observability vacancy for a globally operating Zurich based company in the financial sector . Your tasks: Managing the global observability platform as a member of a product team Being responsible for the platform life cycle from design to production Cooperating with application teams to collect feedback and improve the product offering Creating an API-first platform to drive the adoption of monitoring-as-code Your experience/knowledge: Several years of experience as a full-stack software or platform engineer with expertise in Java or .NET/C# ideally in the Computer Science or IT field Well-versed with modern observability platforms, collecting infrastructure and application metrics Proficiency in defining threshold, alerts and dashboard visualization of monitoring information Knowhow of open-source or commercial APM and observability products like Prometheus, Grafana, Dynatrace, Open Telemetry Familiarity with cloud technologies and platforms with focus on Kubernetes and Azure Language skills: English - fluent in written and spoken, German conversational Your soft skills: Team player with good communication and organizational abilities Excellent problem-solving skills and the ability to troubleshoot complex issues Location: Zurich, Switzerland Sector: Finance Start: 06/2024 Duration: 12MM+ Ref .Nr.: BH21615 Take the next step and send us your resume along with a daytime phone number where we can reach you. Due to Swiss work permit restrictions, we can only consider applications from Swiss nationals, EU citizens as well as current work-permit holders for Switzerland. Ukrainian refugees are warmly welcomed, we will support you all the way. We welcome applications from individuals of all genders, age groups, sexual orientations, personal expressions, ethnic backgrounds, and religious beliefs. Therefore, there is no requirement to provide gender information or a photo in your application. As per client requirements, we need information about your marital status, nationality, date of birth, and a valid Swiss work permit. For applicants with disabilities, we are happy to explore potential solutions with our end client.
02/05/2024
Project-based
Platform Engineer - Observability vacancy for a globally operating Zurich based company in the financial sector . Your tasks: Managing the global observability platform as a member of a product team Being responsible for the platform life cycle from design to production Cooperating with application teams to collect feedback and improve the product offering Creating an API-first platform to drive the adoption of monitoring-as-code Your experience/knowledge: Several years of experience as a full-stack software or platform engineer with expertise in Java or .NET/C# ideally in the Computer Science or IT field Well-versed with modern observability platforms, collecting infrastructure and application metrics Proficiency in defining threshold, alerts and dashboard visualization of monitoring information Knowhow of open-source or commercial APM and observability products like Prometheus, Grafana, Dynatrace, Open Telemetry Familiarity with cloud technologies and platforms with focus on Kubernetes and Azure Language skills: English - fluent in written and spoken, German conversational Your soft skills: Team player with good communication and organizational abilities Excellent problem-solving skills and the ability to troubleshoot complex issues Location: Zurich, Switzerland Sector: Finance Start: 06/2024 Duration: 12MM+ Ref .Nr.: BH21615 Take the next step and send us your resume along with a daytime phone number where we can reach you. Due to Swiss work permit restrictions, we can only consider applications from Swiss nationals, EU citizens as well as current work-permit holders for Switzerland. Ukrainian refugees are warmly welcomed, we will support you all the way. We welcome applications from individuals of all genders, age groups, sexual orientations, personal expressions, ethnic backgrounds, and religious beliefs. Therefore, there is no requirement to provide gender information or a photo in your application. As per client requirements, we need information about your marital status, nationality, date of birth, and a valid Swiss work permit. For applicants with disabilities, we are happy to explore potential solutions with our end client.