We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
06/05/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
06/05/2024
Project-based
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
Overview The role of Application Engineer is to develop engineering solutions using company products or board sets to meet customer needs. The role involves all aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires in-depth understanding of the functionality and use of the company's products and board sets and how to adapt them for new applications. It requires international travel. Duties and responsibilities Investigate requests for the development of solutions to meet customer applications, originating from customers or internally from Product Management. Undertake investigative / feasibility work to develop solutions. Plan and cost projects; provide information to Sales for quotation. Develop application solutions through developing new hardware and software, configuring products, and integrating 3rd party products. Test and maintain hardware and software, including release process, version control, and bug management. Write and maintain documentation for designs to describe functionality, use and reasons for design decisions. Perform acceptance testing of application solutions to verify correct operation, prior to release to the market. Resolve any issues found before providing to customers. Manage projects and work as a team member on projects; plan, track and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with people inside and outside the company, and coordinate other departments involved (such as R&D) to successfully achieve outcomes and results. Use company procedures, processes, and consistent styles. Write, issue and update hardware and software documentation; adhere to coding standards when developing software. Maintain traceability, update documentation, use version control for all document changes. Provide expert help for the Support team to help address customer problems with the use of solutions developed by Application Engineering. Capture and communicate ideas and technical information on solutions, their performance and application, verbally and in written technical documentation, and provide internally (Marketing, Sales) and externally to customers and Representatives. Write technical articles and application notes for customers and for publication. Support promotion of company application engineering capability at industry exhibitions. Manage customer relationship for application engineering projects: Build and maintain a strong working relationship with the customer to understand their needs and communicate that within the company. Experience: Embedded Firmware Development : Can develop real-time embedded firmware in C/C++ covering the full design life cycle; Has working experience with firmware release process, version control, and bug management. Hardware Development: Working experience with schematic capture, building and debugging circuits; Can use standard electronics principles to prove robustness of designs. Electronics Knowledge: Good design knowledge of digital and analogue electronics, and software design using C/C++. Project Management: Able to demonstrate successful outcomes on working on a project either autonomously or as part of a larger team; Experience working within an agile, continuous delivery environment. Procedures and Processes : Appreciates the benefits of working to defined processes; Prior contact using systems for software version control, issue tracking, planning would be a benefit, with an emphasis on using these tools to collaborate in a smooth fashion. Tools and Technologies: Able to specify, install, use and maintain tools and technologies (e.g. development environments) needed for software development. Education: Minimum of a 2:1 degree in a relevant field (for example, but not limited to, mechatronics, electronics, AI, robotics). This would ideally suit someone looking to move into their second job, but graduates would be considered. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
04/05/2024
Full time
Overview The role of Application Engineer is to develop engineering solutions using company products or board sets to meet customer needs. The role involves all aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires in-depth understanding of the functionality and use of the company's products and board sets and how to adapt them for new applications. It requires international travel. Duties and responsibilities Investigate requests for the development of solutions to meet customer applications, originating from customers or internally from Product Management. Undertake investigative / feasibility work to develop solutions. Plan and cost projects; provide information to Sales for quotation. Develop application solutions through developing new hardware and software, configuring products, and integrating 3rd party products. Test and maintain hardware and software, including release process, version control, and bug management. Write and maintain documentation for designs to describe functionality, use and reasons for design decisions. Perform acceptance testing of application solutions to verify correct operation, prior to release to the market. Resolve any issues found before providing to customers. Manage projects and work as a team member on projects; plan, track and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with people inside and outside the company, and coordinate other departments involved (such as R&D) to successfully achieve outcomes and results. Use company procedures, processes, and consistent styles. Write, issue and update hardware and software documentation; adhere to coding standards when developing software. Maintain traceability, update documentation, use version control for all document changes. Provide expert help for the Support team to help address customer problems with the use of solutions developed by Application Engineering. Capture and communicate ideas and technical information on solutions, their performance and application, verbally and in written technical documentation, and provide internally (Marketing, Sales) and externally to customers and Representatives. Write technical articles and application notes for customers and for publication. Support promotion of company application engineering capability at industry exhibitions. Manage customer relationship for application engineering projects: Build and maintain a strong working relationship with the customer to understand their needs and communicate that within the company. Experience: Embedded Firmware Development : Can develop real-time embedded firmware in C/C++ covering the full design life cycle; Has working experience with firmware release process, version control, and bug management. Hardware Development: Working experience with schematic capture, building and debugging circuits; Can use standard electronics principles to prove robustness of designs. Electronics Knowledge: Good design knowledge of digital and analogue electronics, and software design using C/C++. Project Management: Able to demonstrate successful outcomes on working on a project either autonomously or as part of a larger team; Experience working within an agile, continuous delivery environment. Procedures and Processes : Appreciates the benefits of working to defined processes; Prior contact using systems for software version control, issue tracking, planning would be a benefit, with an emphasis on using these tools to collaborate in a smooth fashion. Tools and Technologies: Able to specify, install, use and maintain tools and technologies (e.g. development environments) needed for software development. Education: Minimum of a 2:1 degree in a relevant field (for example, but not limited to, mechatronics, electronics, AI, robotics). This would ideally suit someone looking to move into their second job, but graduates would be considered. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
IoT Device and Application Test Engineer | Full time on site in Edinburgh A specialist testing role is required to work within a larger Product Design R D team to provide hardware and software testing support to ensure the integrity of the product suites being continually developed ie both the hardware and the software. The system is used in the emergency services sector and comprises mobile camera technology plus Management System, As a member of QA, you will collaborate with the RD SCRUM teams globally to identify risks, develop and execute test plans, write effective bug reports, and test the integration of new versions of the product line. The ideal candidate will have a testing mindset and enjoy using software tools to stress web applications as well as a software and hardware background (and ideally familiarity with networking technology and video processing.) Required Skills: - Experience in software engineering or coding in Java or Python - Writing automation testing scripts in Java (Playwright) or Selenium - Experience with hardware. - Strong communication skills; both written and verbal. - Ideally some SQL Job Responsibilities: - Test the web application, both manually and technically. - Develop and execute test plans. - Test functionality and integration of in-development cameras. - Assemble hardware setups involving IP cameras, networked devices. - Write readable, persuasive Bug Reports. - Risk assess product features, prioritising testing appropriately. - Regression test products before major release. - Develop maintain Test Automation suites. - Contribute to the Test team's continual improvement culture. - Reproduce and verify any new bugs at short notice. In return for your expertise, we ' ll support you in this new challenge with coaching development every step of the way. Also, to reward your hard work You'll get: Competitive salary and bonus schemes. Two weeks additional pay per year (holiday bonus). 25 days holiday entitlement + bank holidays. Attractive defined contribution pension scheme. Employee stock purchase plan. Life assurance. Enhanced maternity and paternity pay. Career development support and wide ranging learning opportunities. Employee health and wellbeing support EAP, wellbeing guidance etc. Carbon neutral initiatives/goals. Corporate social responsibility initiatives including support for volunteering days. SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
03/05/2024
Full time
IoT Device and Application Test Engineer | Full time on site in Edinburgh A specialist testing role is required to work within a larger Product Design R D team to provide hardware and software testing support to ensure the integrity of the product suites being continually developed ie both the hardware and the software. The system is used in the emergency services sector and comprises mobile camera technology plus Management System, As a member of QA, you will collaborate with the RD SCRUM teams globally to identify risks, develop and execute test plans, write effective bug reports, and test the integration of new versions of the product line. The ideal candidate will have a testing mindset and enjoy using software tools to stress web applications as well as a software and hardware background (and ideally familiarity with networking technology and video processing.) Required Skills: - Experience in software engineering or coding in Java or Python - Writing automation testing scripts in Java (Playwright) or Selenium - Experience with hardware. - Strong communication skills; both written and verbal. - Ideally some SQL Job Responsibilities: - Test the web application, both manually and technically. - Develop and execute test plans. - Test functionality and integration of in-development cameras. - Assemble hardware setups involving IP cameras, networked devices. - Write readable, persuasive Bug Reports. - Risk assess product features, prioritising testing appropriately. - Regression test products before major release. - Develop maintain Test Automation suites. - Contribute to the Test team's continual improvement culture. - Reproduce and verify any new bugs at short notice. In return for your expertise, we ' ll support you in this new challenge with coaching development every step of the way. Also, to reward your hard work You'll get: Competitive salary and bonus schemes. Two weeks additional pay per year (holiday bonus). 25 days holiday entitlement + bank holidays. Attractive defined contribution pension scheme. Employee stock purchase plan. Life assurance. Enhanced maternity and paternity pay. Career development support and wide ranging learning opportunities. Employee health and wellbeing support EAP, wellbeing guidance etc. Carbon neutral initiatives/goals. Corporate social responsibility initiatives including support for volunteering days. SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
Position Available : RF Systems Engineer Location : Bristol - Dynamic Working Hours Salary : Up to £63,000 + Paid Overtime, Company Bonus & Very Good Pension Package Experience needed : Experience in RF, DSP, Antenna & Modelling and experience being involved with the full product life cycle from research and concept development to system design, integration, verification and validation. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Supplier Development Manager to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Designing and developing RF systems Participating in, or leading design reviews across the product life cycle. Coordinating the transition of development hardware into production, including environmental testing, qualification testing and design certification. System level functionality proving, Software/Firmware integration and proving. What we need from you: RF/Microwave systems knowledge Understanding of waveform design and implementation Requirements management and systems design Technical leadership of junior engineers System level RF modelling Antenna design and/or EM modelling Familiarity of Real Time Digital Signal Processing for high data bandwidth systems Systems modelling and Autocode generation experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
03/05/2024
Full time
Position Available : RF Systems Engineer Location : Bristol - Dynamic Working Hours Salary : Up to £63,000 + Paid Overtime, Company Bonus & Very Good Pension Package Experience needed : Experience in RF, DSP, Antenna & Modelling and experience being involved with the full product life cycle from research and concept development to system design, integration, verification and validation. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Supplier Development Manager to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Designing and developing RF systems Participating in, or leading design reviews across the product life cycle. Coordinating the transition of development hardware into production, including environmental testing, qualification testing and design certification. System level functionality proving, Software/Firmware integration and proving. What we need from you: RF/Microwave systems knowledge Understanding of waveform design and implementation Requirements management and systems design Technical leadership of junior engineers System level RF modelling Antenna design and/or EM modelling Familiarity of Real Time Digital Signal Processing for high data bandwidth systems Systems modelling and Autocode generation experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
ARM (Advanced Resource Managers)
Corsham, Wiltshire
Lead Mechanical Engineer (Assembly, Integration & Testing) Corsham 12-month contract Paying up to £45p/h (Umbrella) ARM have partnered with an Aerospace client who are looking for an experienced AIT engineer to work out of their manufacturing site based in Corsham. As the AIT Lead Engineer, you'll be responsible for leading the Mechanical team and ensuring all engineering concepts are delivered to the shop floor. Responsibilities: * Leading a team of AIT engineers on specific projects as well as planning the mechanical team's activities on a weekly basis. * Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A - E' * Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures, and test reports. * Control of all project MGSE, flight & support equipment * Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. * Alignment - producing test procedures and operating and maintaining optical alignment equipment. * Designing test equipment, overseeing its manufacture, and commissioning * Mechanical handling of spacecraft, instruments, payloads, solar arrays, antennas etc * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Install and validate test instrumentation. * Support propulsion testing * Handling and installation of thermal hardware * Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation associated with performing these tasks. * Pyrotechnic handling, installation, and safety * Plan and control the workload of the AIT team consisting of engineers and technicians. * Be able to travel overseas to work for short periods (typically 2-3 months, could be 6-7 months on occasions) * Be able to integrate quickly and easily into an AIT team. Experience required: * Appreciation of satellite integration processes and project phases * Use of SAP or other ERP System * Understanding of build documentation and the need for it * Driving build quality through review of processes and implementation of improvements * Managing a team during day-to-day activities ensuring work is completed on time and the correct standard. * Controlling and delivery of projects to budget and schedule * Face-to-face dealings with customers and suppliers * Worked in volatile, high-pressure environments to resolve technical and personnel conflicts. * Spacecraft Mechanical testing on prime projects is essential. * Leading other team members * Production of MGSE specs and operation of MGSE and flight HW * Production of high-quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
03/05/2024
Project-based
Lead Mechanical Engineer (Assembly, Integration & Testing) Corsham 12-month contract Paying up to £45p/h (Umbrella) ARM have partnered with an Aerospace client who are looking for an experienced AIT engineer to work out of their manufacturing site based in Corsham. As the AIT Lead Engineer, you'll be responsible for leading the Mechanical team and ensuring all engineering concepts are delivered to the shop floor. Responsibilities: * Leading a team of AIT engineers on specific projects as well as planning the mechanical team's activities on a weekly basis. * Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A - E' * Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures, and test reports. * Control of all project MGSE, flight & support equipment * Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. * Alignment - producing test procedures and operating and maintaining optical alignment equipment. * Designing test equipment, overseeing its manufacture, and commissioning * Mechanical handling of spacecraft, instruments, payloads, solar arrays, antennas etc * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Install and validate test instrumentation. * Support propulsion testing * Handling and installation of thermal hardware * Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation associated with performing these tasks. * Pyrotechnic handling, installation, and safety * Plan and control the workload of the AIT team consisting of engineers and technicians. * Be able to travel overseas to work for short periods (typically 2-3 months, could be 6-7 months on occasions) * Be able to integrate quickly and easily into an AIT team. Experience required: * Appreciation of satellite integration processes and project phases * Use of SAP or other ERP System * Understanding of build documentation and the need for it * Driving build quality through review of processes and implementation of improvements * Managing a team during day-to-day activities ensuring work is completed on time and the correct standard. * Controlling and delivery of projects to budget and schedule * Face-to-face dealings with customers and suppliers * Worked in volatile, high-pressure environments to resolve technical and personnel conflicts. * Spacecraft Mechanical testing on prime projects is essential. * Leading other team members * Production of MGSE specs and operation of MGSE and flight HW * Production of high-quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
ARM (Advanced Resource Managers)
Stevenage, Hertfordshire
Mechanical Engineer (Assembly, Integration & Testing) Stevenage 12-month contract Paying up to £35p/h (Umbrella) ARM has partnered with an Aerospace client who is looking for an experienced Mechanical Engineer (AIT) to work out of their manufacturing site based in Stevenage. As the AIT Mechanical Engineer, you'll be responsible for providing support on writing processes, plans, and procedures in 3D Experience for the production of Satellites and payloads. This includes supporting hardware assembly on the Satellites such as black boxes, Solar Array, and structure panels. Supporting Satellite environmental testing at the test facility. Responsibilities: * Support to the customization phase starting at the project kick-off. * Support project DMU (Digital mock-up/design for manufacture) sessions to ensure design for manufacture. * Lead the installation of Satellite appendages and applicable integration flows and preparation. * Oversee unit installation activities on the Satellite. * Support quality reviews, conduct PFMEA and Root Cause Analysis * Support in the creation of re-work instructions based on project requirements and identify parts and tooling required to carry them out. * Design of tooling/build aids for assembly execution * Support to R&D * Training module creation and maintenance. Experience required: * Minimum of HNC level in a Mechanical engineering discipline * Good planning skills and process competence, (MRP system experience an advantage) * Satellite Appendage installation process (Solar Array, reflectors, antennas, deployable systems). * Good understanding and detailed experience of complex mechanical systems. * Lean manufacturing techniques including 5S, root cause analysis, and continuous improvement. * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Handling and installation of thermal hardware (heaters, thermistors) * Mechanical integration of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation/process associated with performing these * Previous experience with payload builds is a distinct advantage. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
03/05/2024
Project-based
Mechanical Engineer (Assembly, Integration & Testing) Stevenage 12-month contract Paying up to £35p/h (Umbrella) ARM has partnered with an Aerospace client who is looking for an experienced Mechanical Engineer (AIT) to work out of their manufacturing site based in Stevenage. As the AIT Mechanical Engineer, you'll be responsible for providing support on writing processes, plans, and procedures in 3D Experience for the production of Satellites and payloads. This includes supporting hardware assembly on the Satellites such as black boxes, Solar Array, and structure panels. Supporting Satellite environmental testing at the test facility. Responsibilities: * Support to the customization phase starting at the project kick-off. * Support project DMU (Digital mock-up/design for manufacture) sessions to ensure design for manufacture. * Lead the installation of Satellite appendages and applicable integration flows and preparation. * Oversee unit installation activities on the Satellite. * Support quality reviews, conduct PFMEA and Root Cause Analysis * Support in the creation of re-work instructions based on project requirements and identify parts and tooling required to carry them out. * Design of tooling/build aids for assembly execution * Support to R&D * Training module creation and maintenance. Experience required: * Minimum of HNC level in a Mechanical engineering discipline * Good planning skills and process competence, (MRP system experience an advantage) * Satellite Appendage installation process (Solar Array, reflectors, antennas, deployable systems). * Good understanding and detailed experience of complex mechanical systems. * Lean manufacturing techniques including 5S, root cause analysis, and continuous improvement. * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Handling and installation of thermal hardware (heaters, thermistors) * Mechanical integration of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation/process associated with performing these * Previous experience with payload builds is a distinct advantage. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
World Class Defence Organisation based in Bristol is currently looking to recruit 2x Low level Embedded Software Engineer subcontractors on an initial 6 month contract. The role will likely be required to be onsite, but it can be worked on a 4-day week basis. Contract Duration: 6 Months initially and then ongoing. Hourly Rate: £70.00ph (Umbrella) Low level Embedded Software Engineer Job Description: Bristol Embedded Software provide Real Time solutions for our in house advanced weapon Bristol Embedded Software develop Real Time software solutions for Missile Units/Subsystems. We design, develop, build, integrate, test and support the whole SW product. The Low Level & Security software engineer will be responsible for the through life development of one or more of the internally developed security solutions and bespoke product lines. Skillset/experience required: Required Embedded C programming & debugging Hardware/software integration experience Experience working to standards Experience with ARM processors Basic Linux skills Desirable Full software life cycle experience (design, development and test) Knowledge of Real Time Operating Systems (eg PikeOS, FreeRTOS) Knowledge of Lauterbach debug tools Experience with ARM Cortex-A series processors Knowledge of ARM TrustZone Knowledge of IBM Configuration Management tools (RTC/EWM) Very interested in knowledge of Texas Instruments TD4A family of processors Knowledge/Understanding of security software.
03/05/2024
Project-based
World Class Defence Organisation based in Bristol is currently looking to recruit 2x Low level Embedded Software Engineer subcontractors on an initial 6 month contract. The role will likely be required to be onsite, but it can be worked on a 4-day week basis. Contract Duration: 6 Months initially and then ongoing. Hourly Rate: £70.00ph (Umbrella) Low level Embedded Software Engineer Job Description: Bristol Embedded Software provide Real Time solutions for our in house advanced weapon Bristol Embedded Software develop Real Time software solutions for Missile Units/Subsystems. We design, develop, build, integrate, test and support the whole SW product. The Low Level & Security software engineer will be responsible for the through life development of one or more of the internally developed security solutions and bespoke product lines. Skillset/experience required: Required Embedded C programming & debugging Hardware/software integration experience Experience working to standards Experience with ARM processors Basic Linux skills Desirable Full software life cycle experience (design, development and test) Knowledge of Real Time Operating Systems (eg PikeOS, FreeRTOS) Knowledge of Lauterbach debug tools Experience with ARM Cortex-A series processors Knowledge of ARM TrustZone Knowledge of IBM Configuration Management tools (RTC/EWM) Very interested in knowledge of Texas Instruments TD4A family of processors Knowledge/Understanding of security software.
We are currently looking on behalf of one of our important clients for an Electronic Hardware Design Engineer. The role is a permanent position based Bern Canton & comes with some home office allowance. Your Role: Develop Electronics Solutions for customers, projects & a new product portfolio. Design, implement, document & verify Electronic HW for new & existing control systems. Work on international projects & participate in risk & safety assessments within interdisciplinary teams. Design prototypes & test infrastructure & automation solutions, implement them, take over technical product support across the entire product life cycle & support with production, assembly & commissioning work. Plan & carry out standard tests in-house, in external test laboratories & on customer premises. Your Skills: At least 3 years of relevant professional experience in Electronic Hardware Engineering & very proficient Electronic Development skills. Skilled & experienced in the Development of Industrial Control Electronics (CAN, BLDC, ACDC, EMC). Good Soldering skills. A knowledge of one or more PCB design tools (OrCAD, Altium, Mentor) is considered advantageous. Any experience in Python, C/C++ or similar programming languages is a plus. Ideally experienced in Motor Control. Experience in Obsolescence Management is desirable. Preferably experienced in the Transportation Industry, Industrial Environments, Safety-Critical Industries & Series Production. Your Profile: Completed University Degree in the field of Electronics, Electrical Engineering, Computer Science or similar. Enthusiastic to cooperate within Interdisciplinary Project Teams. Fluent in English (spoken & written). Any additional language skills in German or French are considered very advantageous.
03/05/2024
Full time
We are currently looking on behalf of one of our important clients for an Electronic Hardware Design Engineer. The role is a permanent position based Bern Canton & comes with some home office allowance. Your Role: Develop Electronics Solutions for customers, projects & a new product portfolio. Design, implement, document & verify Electronic HW for new & existing control systems. Work on international projects & participate in risk & safety assessments within interdisciplinary teams. Design prototypes & test infrastructure & automation solutions, implement them, take over technical product support across the entire product life cycle & support with production, assembly & commissioning work. Plan & carry out standard tests in-house, in external test laboratories & on customer premises. Your Skills: At least 3 years of relevant professional experience in Electronic Hardware Engineering & very proficient Electronic Development skills. Skilled & experienced in the Development of Industrial Control Electronics (CAN, BLDC, ACDC, EMC). Good Soldering skills. A knowledge of one or more PCB design tools (OrCAD, Altium, Mentor) is considered advantageous. Any experience in Python, C/C++ or similar programming languages is a plus. Ideally experienced in Motor Control. Experience in Obsolescence Management is desirable. Preferably experienced in the Transportation Industry, Industrial Environments, Safety-Critical Industries & Series Production. Your Profile: Completed University Degree in the field of Electronics, Electrical Engineering, Computer Science or similar. Enthusiastic to cooperate within Interdisciplinary Project Teams. Fluent in English (spoken & written). Any additional language skills in German or French are considered very advantageous.
World Class Defence Organisation based in Bristol is currently looking to recruit 7x C++/Java Software Engineer subcontractors on an initial 6 month contract. The role will be onsite but a 4 day working week (Monday to Thursday) is OK. Contract Duration: 6 months initially and then ongoing Hourly Rate: £70.00ph (Umbrella) Essential: Knowledge of C++ or Core Java. Having both is desirable. Familiarity with a range of CI/CD/DevOps toolsets; Jira, GitHub, Jenkins in particular. Desirable: Knowledge includes, Java FX, QT, MISRA and Google Understanding of Linux command line. Python skills could help. Software Engineer C++ and Java Job Description: The Mission Planning and Control Software Department produce desktop solutions for planning activities on a range of weapon systems. We also facilitate the integration of products into third party planning applications. Other areas include; diagnostic and maintenance tools, and bespoke software components for launchers. Applicants must be highly proficient in C++ and/or Core Java. We are looking to recruit across various departmental activities including mission planning applications and launcher sub-systems. Responsibilities: In conjunction with the rest of the project team, participate in the design, development and proving activities for a launcher sub-system. To undertake a full range of engineering activities in line with relevant company processes and standards. Must be capable of taking ownership of features. The role includes system integration activities on a virtual test environment and potentially representative and deliverable hardware. Depending on the skills and experience of the engineer the role could potentially require involvement in the whole development life cycle from Architectural specification of the software product through to the testing and verification. The role will include supporting the production of project documentation. Skillset/experience required: A Software Engineer capable of design, development and proving of complex software products. The ability to communicate technical issues with other engineers and stakeholders from different skill areas. Experience operating as part of a collaborative Agile team. Knowledge of Software development practices and processes is required. Familiarity with a range of CI/CD/DevOps toolsets; Jira, GitHub, Jenkins in particular. Mandatory knowledge of C++ or Core Java. Having both is desirable Desirable knowledge includes, Java FX, QT, MISRA and Google Test.
03/05/2024
Project-based
World Class Defence Organisation based in Bristol is currently looking to recruit 7x C++/Java Software Engineer subcontractors on an initial 6 month contract. The role will be onsite but a 4 day working week (Monday to Thursday) is OK. Contract Duration: 6 months initially and then ongoing Hourly Rate: £70.00ph (Umbrella) Essential: Knowledge of C++ or Core Java. Having both is desirable. Familiarity with a range of CI/CD/DevOps toolsets; Jira, GitHub, Jenkins in particular. Desirable: Knowledge includes, Java FX, QT, MISRA and Google Understanding of Linux command line. Python skills could help. Software Engineer C++ and Java Job Description: The Mission Planning and Control Software Department produce desktop solutions for planning activities on a range of weapon systems. We also facilitate the integration of products into third party planning applications. Other areas include; diagnostic and maintenance tools, and bespoke software components for launchers. Applicants must be highly proficient in C++ and/or Core Java. We are looking to recruit across various departmental activities including mission planning applications and launcher sub-systems. Responsibilities: In conjunction with the rest of the project team, participate in the design, development and proving activities for a launcher sub-system. To undertake a full range of engineering activities in line with relevant company processes and standards. Must be capable of taking ownership of features. The role includes system integration activities on a virtual test environment and potentially representative and deliverable hardware. Depending on the skills and experience of the engineer the role could potentially require involvement in the whole development life cycle from Architectural specification of the software product through to the testing and verification. The role will include supporting the production of project documentation. Skillset/experience required: A Software Engineer capable of design, development and proving of complex software products. The ability to communicate technical issues with other engineers and stakeholders from different skill areas. Experience operating as part of a collaborative Agile team. Knowledge of Software development practices and processes is required. Familiarity with a range of CI/CD/DevOps toolsets; Jira, GitHub, Jenkins in particular. Mandatory knowledge of C++ or Core Java. Having both is desirable Desirable knowledge includes, Java FX, QT, MISRA and Google Test.
Are you a talented Hardware Engineer seeking an innovative role in IoT and smart technology? Lynx Recruitment is recruiting for a Senior Hardware Engineer to join our clients' team in Cambridge, UK. You will work in their state-of-the-art office adjacent to the prestigious Cambridge Science Park, with access to prototype labs, equipment and collaboration spaces. As a key member of the hardware team, you will design, develop and test innovative narrowband RF devices and modules. Responsibilities: Support hardware development projects from concept to production Design and layout PCBs, select components, create prototypes Perform testing to verify and validate product performance Execute field trials and manage external test facilities Collaborate with software, operations and test engineers Requirements: Degree in Electronic/Electrical Engineering or similar experience 5+ years hardware design and test experience Knowledge of RF systems, cellular protocols, TCP/IP, etc. Proficiency with Altium, CAD tools and lab equipment Excellent analytical and troubleshooting skills Strong communication and teamwork abilities Our client offers a competitive salary, share options, health insurance, pension contributions and 25 days holiday. If you are seeking to progress your career in IoT/electronics design at an innovative tech company, apply today!
02/05/2024
Full time
Are you a talented Hardware Engineer seeking an innovative role in IoT and smart technology? Lynx Recruitment is recruiting for a Senior Hardware Engineer to join our clients' team in Cambridge, UK. You will work in their state-of-the-art office adjacent to the prestigious Cambridge Science Park, with access to prototype labs, equipment and collaboration spaces. As a key member of the hardware team, you will design, develop and test innovative narrowband RF devices and modules. Responsibilities: Support hardware development projects from concept to production Design and layout PCBs, select components, create prototypes Perform testing to verify and validate product performance Execute field trials and manage external test facilities Collaborate with software, operations and test engineers Requirements: Degree in Electronic/Electrical Engineering or similar experience 5+ years hardware design and test experience Knowledge of RF systems, cellular protocols, TCP/IP, etc. Proficiency with Altium, CAD tools and lab equipment Excellent analytical and troubleshooting skills Strong communication and teamwork abilities Our client offers a competitive salary, share options, health insurance, pension contributions and 25 days holiday. If you are seeking to progress your career in IoT/electronics design at an innovative tech company, apply today!
Senior Hardware Design Engineer - Exciting Opportunity with Leading Tech Company Lynx is working with a renowned tech company to recruit a Senior Hardware Design Engineer. In this role you'll play a pivotal role in new product introduction as well as sustaining engineering for ground-breaking products. This is a hybrid role and also offers a bonus of 3-6%. Key Responsibilities: Design electronic circuits, subsystems, and systems covering analog, digital, and RF Schematic capture, layout, and library management Evaluate new systems and technologies for feasibility and product design Technical support for production, manufacturing, and troubleshooting Design verification, testing, and documentation Requirements: 4+ years of relevant hardware design experience Strong expertise in digital circuit design (microprocessors, FPGAs, high-speed peripherals) Solid skills in analog circuit design (power supplies, etc.) Familiarity with PCB layout, EMC/CE marking, and design for IPC Hands-on experience in PCB testing Desired: Proficiency with industry-standard design tools - Altium preferred Understanding of military/airborne design standards (MIL-STD, DO-160, etc.) Practical testing skills with scopes, analysers, JTAG boundary scan, etc. Hit apply to find out more information.
02/05/2024
Full time
Senior Hardware Design Engineer - Exciting Opportunity with Leading Tech Company Lynx is working with a renowned tech company to recruit a Senior Hardware Design Engineer. In this role you'll play a pivotal role in new product introduction as well as sustaining engineering for ground-breaking products. This is a hybrid role and also offers a bonus of 3-6%. Key Responsibilities: Design electronic circuits, subsystems, and systems covering analog, digital, and RF Schematic capture, layout, and library management Evaluate new systems and technologies for feasibility and product design Technical support for production, manufacturing, and troubleshooting Design verification, testing, and documentation Requirements: 4+ years of relevant hardware design experience Strong expertise in digital circuit design (microprocessors, FPGAs, high-speed peripherals) Solid skills in analog circuit design (power supplies, etc.) Familiarity with PCB layout, EMC/CE marking, and design for IPC Hands-on experience in PCB testing Desired: Proficiency with industry-standard design tools - Altium preferred Understanding of military/airborne design standards (MIL-STD, DO-160, etc.) Practical testing skills with scopes, analysers, JTAG boundary scan, etc. Hit apply to find out more information.
IBM Z Storage Manager Initial 12-month Contract Via Umbrella UK - Remote - Commutable to either Edinburgh or Canary Wharf office when required. One of Loriens Banking Clients is looking for an experience IBM Z Storage Manager to join them on an initial 12-month contract. The role is looking for someone who comes from a Storage Management/Engineering background with the ability to work and partner with external vendors, support/lead technical management of deployment projects at enterprise-scale level. Responsibilities Perform a Technical Project Management role for large zSeries infrastructure deployment and evergreening projects Setup automation to reduce manaual interventions in the Storage infrastructure Test new software and exploit functionality Consolidate and reduce infrastructure complexity Risk and Cost Management Ensure Service Quality Targets are met for offered platform services Business stakeholder management Vendor liaison and management zSeries Storage hardware/software design, configuration, testing, implementation and support Essential Skills/Experience zSeries Storage Management/Engineering background preferred and/or experience to equivalent level Working and partnering with vendors (eg IBM, DELL, Broadcom) Supporting and/or leading technical management of large infrastructure deployment projects Experience supporting large-scale enterprise IT environment and the Embedded controls within change, incident, and problem management processes Experience working with Agile working practices and tooling Experience and awareness of security, audit, risk and compliance within enterprise IT environment Technical Skills IBM DS8K disk hardware installation design, upgrade and support skills including DSCLI Scripting and familiarity with HMC GUI DELL DLM virtual tape (VTE with Data Domain) hardware installation design, upgrade and support skills with knowledge of GUI, NFS and Linux Broadcom (Brocade) DCX hardware skills and FICON/FIBRE concepts and configuration. Set-up and utilising SanNav and Maps IBM core knowledge: z/OS, TSO, SDSF, JCL, IDCAMS, IWS IBM storage knowledge: DFHSM, DFDSS, ICKDSF, DFSMS (inc. OAM), TDMF, GDPS, CSM Broadcom (CA): CA1, CA Vantage, CA Disk, CA Allocate, CA View, Endeavor Dino Software: T-rex, Terradon Rocket: CR+ Interchip: RTD. Carbon60, Lorien & SRG - The Impellam Group STEM Portfolio are acting as an Employment Business in relation to this vacancy.
02/05/2024
Project-based
IBM Z Storage Manager Initial 12-month Contract Via Umbrella UK - Remote - Commutable to either Edinburgh or Canary Wharf office when required. One of Loriens Banking Clients is looking for an experience IBM Z Storage Manager to join them on an initial 12-month contract. The role is looking for someone who comes from a Storage Management/Engineering background with the ability to work and partner with external vendors, support/lead technical management of deployment projects at enterprise-scale level. Responsibilities Perform a Technical Project Management role for large zSeries infrastructure deployment and evergreening projects Setup automation to reduce manaual interventions in the Storage infrastructure Test new software and exploit functionality Consolidate and reduce infrastructure complexity Risk and Cost Management Ensure Service Quality Targets are met for offered platform services Business stakeholder management Vendor liaison and management zSeries Storage hardware/software design, configuration, testing, implementation and support Essential Skills/Experience zSeries Storage Management/Engineering background preferred and/or experience to equivalent level Working and partnering with vendors (eg IBM, DELL, Broadcom) Supporting and/or leading technical management of large infrastructure deployment projects Experience supporting large-scale enterprise IT environment and the Embedded controls within change, incident, and problem management processes Experience working with Agile working practices and tooling Experience and awareness of security, audit, risk and compliance within enterprise IT environment Technical Skills IBM DS8K disk hardware installation design, upgrade and support skills including DSCLI Scripting and familiarity with HMC GUI DELL DLM virtual tape (VTE with Data Domain) hardware installation design, upgrade and support skills with knowledge of GUI, NFS and Linux Broadcom (Brocade) DCX hardware skills and FICON/FIBRE concepts and configuration. Set-up and utilising SanNav and Maps IBM core knowledge: z/OS, TSO, SDSF, JCL, IDCAMS, IWS IBM storage knowledge: DFHSM, DFDSS, ICKDSF, DFSMS (inc. OAM), TDMF, GDPS, CSM Broadcom (CA): CA1, CA Vantage, CA Disk, CA Allocate, CA View, Endeavor Dino Software: T-rex, Terradon Rocket: CR+ Interchip: RTD. Carbon60, Lorien & SRG - The Impellam Group STEM Portfolio are acting as an Employment Business in relation to this vacancy.
Are you ready to shape the future of wireless technology? We're looking for a dynamic Baseband SoC Expert to lead the charge in developing revolutionary multi-standard solutions for next-generation wireless products. Responsibilities: Drive the architectural design of SoC/ASIC for 5.5/6G wireless products Define requirement specifications and evaluate IPs to ensure optimal performance Design and implement hardware blocks, establishing robust simulation environments for thorough testing. Collaborate closely with cross-functional teams including algorithm developers, hardware designers, and Embedded software experts Partner with the clients wireless teams in Asia to bring ground-breaking innovations to life. Qualifications: 5+ years of hands-on experience in SoC development within industry or academia. Proficiency in Verilog/VHDL for block design, with a strong grasp of C++ or SystemC. Knowledge of wireless physical layer applications is a plus. Expertise in microarchitecture design, including DSP/ARM/CPU and vector/Matrix/graph processors. Experience in designing memory systems such as SRAM/DRAM/Cache and overall SoC architecture. A Master's degree or Ph.D. in electrical engineering, computer architecture, or related field. If you are thinking of being at the forefront of technological advancements and part of ground-breaking projects, shaping the future of wireless communication, taking your career to new heights with opportunities for skill development and advancement within a leading global technology company, we invite you to apply.
01/05/2024
Full time
Are you ready to shape the future of wireless technology? We're looking for a dynamic Baseband SoC Expert to lead the charge in developing revolutionary multi-standard solutions for next-generation wireless products. Responsibilities: Drive the architectural design of SoC/ASIC for 5.5/6G wireless products Define requirement specifications and evaluate IPs to ensure optimal performance Design and implement hardware blocks, establishing robust simulation environments for thorough testing. Collaborate closely with cross-functional teams including algorithm developers, hardware designers, and Embedded software experts Partner with the clients wireless teams in Asia to bring ground-breaking innovations to life. Qualifications: 5+ years of hands-on experience in SoC development within industry or academia. Proficiency in Verilog/VHDL for block design, with a strong grasp of C++ or SystemC. Knowledge of wireless physical layer applications is a plus. Expertise in microarchitecture design, including DSP/ARM/CPU and vector/Matrix/graph processors. Experience in designing memory systems such as SRAM/DRAM/Cache and overall SoC architecture. A Master's degree or Ph.D. in electrical engineering, computer architecture, or related field. If you are thinking of being at the forefront of technological advancements and part of ground-breaking projects, shaping the future of wireless communication, taking your career to new heights with opportunities for skill development and advancement within a leading global technology company, we invite you to apply.
An Electrical/Electronic Engineer is required for a contract assignment with a multi-national leading defence company. Missile Architecture - Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support. It's an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: a) Specifying/determining * system electrical requirements * interface definitions and characteristics between subsystems/equipment * power architecture, including power budget and power profiles * data communication and processing architecture * requirements for EMC, bonding, grounding and screening * signal safety, including routing of safety related signals b) Supporting test and fault-finding activities during compatibility checks, risk reduction, system proving/qualification and integration c) Reviewing and authoring reports, guidelines and processes d) Design assessments and analysis e) Working to defence/industry standards f) Attending and supporting design reviews Alternatively, acting as the Equipment Manager (RMO) for specific electrical/electronic equipment(s) that are part of a missile or launcher system you will: a) Project manage the equipment(s) on behalf of the project during development, qualification and manufacture b) Own the requirements on behalf of the project for the equipment(s) c) Produce Statement(s) of Work for the associated design authority for the equipment(s) d) Create and update plans showing activities for the equipment(s) e) Manage internal & external design authorities for delivery of the equipment(s) hardware, software and deliverables to schedule, cost, quality and performance f) Hold regular progress reviews with the design authority for the equipment(s) g) Review qualification verification evidence h) Track and find resolution to equipment non-compliances i) Attend and support design reviews Skillset/experience required: Technical experience required: * electrical/electronics * interface definitions * knowledge of defence/industry standards, etc. * degree level qualification in a related subject * systems engineering * writing reports Ideally this would be within a defence related background, however, experience within other engineering industries will also be considered. Experience within these other areas are also of interest but not essential: * defence * weapon systems * power supplies * actuators * data communication * sensors * EMC * Health Usage Monitoring Systems (HUMS) * Model Based Engineering (MBE) Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
01/05/2024
Project-based
An Electrical/Electronic Engineer is required for a contract assignment with a multi-national leading defence company. Missile Architecture - Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support. It's an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: a) Specifying/determining * system electrical requirements * interface definitions and characteristics between subsystems/equipment * power architecture, including power budget and power profiles * data communication and processing architecture * requirements for EMC, bonding, grounding and screening * signal safety, including routing of safety related signals b) Supporting test and fault-finding activities during compatibility checks, risk reduction, system proving/qualification and integration c) Reviewing and authoring reports, guidelines and processes d) Design assessments and analysis e) Working to defence/industry standards f) Attending and supporting design reviews Alternatively, acting as the Equipment Manager (RMO) for specific electrical/electronic equipment(s) that are part of a missile or launcher system you will: a) Project manage the equipment(s) on behalf of the project during development, qualification and manufacture b) Own the requirements on behalf of the project for the equipment(s) c) Produce Statement(s) of Work for the associated design authority for the equipment(s) d) Create and update plans showing activities for the equipment(s) e) Manage internal & external design authorities for delivery of the equipment(s) hardware, software and deliverables to schedule, cost, quality and performance f) Hold regular progress reviews with the design authority for the equipment(s) g) Review qualification verification evidence h) Track and find resolution to equipment non-compliances i) Attend and support design reviews Skillset/experience required: Technical experience required: * electrical/electronics * interface definitions * knowledge of defence/industry standards, etc. * degree level qualification in a related subject * systems engineering * writing reports Ideally this would be within a defence related background, however, experience within other engineering industries will also be considered. Experience within these other areas are also of interest but not essential: * defence * weapon systems * power supplies * actuators * data communication * sensors * EMC * Health Usage Monitoring Systems (HUMS) * Model Based Engineering (MBE) Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
An Hardware/Electronics Manager is now available for a global client based near to Edinburgh. The role of Hardware/Electronics Design Manager is now needed as part of rapid growth within the business within Engineering with 10 Engineers reporting in across Electronics and PCB Design. As the Electronics Manager you will be shaping the team and leading the projects with a background of Hardware Design/PCB Design. Your role will involve managing he teams, succession planning, hiring, Performance Management and coaching managing their customer expectations. The company operate on a Hybrid working policy with Excellent benefits alongside bonus! Your role will also include maintaining technical roadmaps ad setting out the project scope, schedule and budget risks for projects for the team. This is an excellent opportunity if you are a Lead Electronics Design Engineer or Electronics Manager looking to get into an organisation where you have growth opportunities for leadership or if you are a staff level Engineer who has experience in mentoring/training/leading to take the next step up! Core Skills/Experience for this role include;- Degree in Engineering field - Electronics/Hardware/Computer Science etc Experience of Electronics Design, PCB Design Mentoring/Guidance of Junior, Mid level engineers Leading and delivering a project or any PM experience Leasing interfacing with customers or stakeholders within the business Excellent interpersonal skills Ability to work in a cross functional team environment I appreciate that you may not have all of the skills listed but if you feel this may be suitable let's have a chat and go from there. Please send your CV to (see below). Alternatively if you know someone who would be ideal for this role help them out and point them in my direction as we do offer generous referral fees WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
01/05/2024
Full time
An Hardware/Electronics Manager is now available for a global client based near to Edinburgh. The role of Hardware/Electronics Design Manager is now needed as part of rapid growth within the business within Engineering with 10 Engineers reporting in across Electronics and PCB Design. As the Electronics Manager you will be shaping the team and leading the projects with a background of Hardware Design/PCB Design. Your role will involve managing he teams, succession planning, hiring, Performance Management and coaching managing their customer expectations. The company operate on a Hybrid working policy with Excellent benefits alongside bonus! Your role will also include maintaining technical roadmaps ad setting out the project scope, schedule and budget risks for projects for the team. This is an excellent opportunity if you are a Lead Electronics Design Engineer or Electronics Manager looking to get into an organisation where you have growth opportunities for leadership or if you are a staff level Engineer who has experience in mentoring/training/leading to take the next step up! Core Skills/Experience for this role include;- Degree in Engineering field - Electronics/Hardware/Computer Science etc Experience of Electronics Design, PCB Design Mentoring/Guidance of Junior, Mid level engineers Leading and delivering a project or any PM experience Leasing interfacing with customers or stakeholders within the business Excellent interpersonal skills Ability to work in a cross functional team environment I appreciate that you may not have all of the skills listed but if you feel this may be suitable let's have a chat and go from there. Please send your CV to (see below). Alternatively if you know someone who would be ideal for this role help them out and point them in my direction as we do offer generous referral fees WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
Senior Network Engineer + £40,000 - £50,000 + Remote + Must hold right to work What you will be responsible for: Supporting in the deployment and management of our FTTP Networks; Working with engineers in the field with issues escalated from other members of the team; Creating high quality Network documentation from new and existing Networks; Handling Network issues within the Network Operations Team and across the FTTP Network Estate; Management of a team of Network Engineers working on the FTTP Estate; Assisting our Network Architecture team in the integration of acquisition Networks; Creating HLD and LLD's for Network deployments based on standard architecture design guidelines; Continually improve and develop Network processes, making them more efficient; Act as senior escalation point to the Network Operations Team members; Manage projects from technical side; and, Contribute/improve Network monitoring and operational excellence What we are looking for A good understanding of L2/L3 networking, PON Networks and experience working with ADTRAN and Juniper Hardware. We would also expect you to have experience in the following: At least five year's experience within a similar role would be preferred; FWA multivendor knowledge and experience is critical to this role in particular on Ubiquity, Mikrotik, Zyxel, TP-Link, Radwin, Siklu, and Cambium. Excellent understanding of access technologies with an emphasis on GPON, XGS-PON; Strong experience with Network Monitoring platforms, such as LibreNMS, Icinga, PRTG, Nagios, etc.; Routing; BGP, OSPF; VLAN's, PPP, Tunnelling; AAA; RADIUS; DNS; Strong analytical skills with proven problem-solving ability; Proven ability to operate in high-pressure situations; Proven ability to work well independently and on a team; Successfully able to handle multiple competing priorities; High level of discipline while displaying a high degree of flexibility and professionalism; and, Strong written and verbal communication skills What we desire A telecommunications degree; Experience with Linux Debian based systems; Knowledge of routing protocols; Linux Shell; Driving license; Fibre knowledge; and, Network certifications like CCNP, JNCIS, etc.
01/05/2024
Full time
Senior Network Engineer + £40,000 - £50,000 + Remote + Must hold right to work What you will be responsible for: Supporting in the deployment and management of our FTTP Networks; Working with engineers in the field with issues escalated from other members of the team; Creating high quality Network documentation from new and existing Networks; Handling Network issues within the Network Operations Team and across the FTTP Network Estate; Management of a team of Network Engineers working on the FTTP Estate; Assisting our Network Architecture team in the integration of acquisition Networks; Creating HLD and LLD's for Network deployments based on standard architecture design guidelines; Continually improve and develop Network processes, making them more efficient; Act as senior escalation point to the Network Operations Team members; Manage projects from technical side; and, Contribute/improve Network monitoring and operational excellence What we are looking for A good understanding of L2/L3 networking, PON Networks and experience working with ADTRAN and Juniper Hardware. We would also expect you to have experience in the following: At least five year's experience within a similar role would be preferred; FWA multivendor knowledge and experience is critical to this role in particular on Ubiquity, Mikrotik, Zyxel, TP-Link, Radwin, Siklu, and Cambium. Excellent understanding of access technologies with an emphasis on GPON, XGS-PON; Strong experience with Network Monitoring platforms, such as LibreNMS, Icinga, PRTG, Nagios, etc.; Routing; BGP, OSPF; VLAN's, PPP, Tunnelling; AAA; RADIUS; DNS; Strong analytical skills with proven problem-solving ability; Proven ability to operate in high-pressure situations; Proven ability to work well independently and on a team; Successfully able to handle multiple competing priorities; High level of discipline while displaying a high degree of flexibility and professionalism; and, Strong written and verbal communication skills What we desire A telecommunications degree; Experience with Linux Debian based systems; Knowledge of routing protocols; Linux Shell; Driving license; Fibre knowledge; and, Network certifications like CCNP, JNCIS, etc.
Senior Hardware Design Engineer - Exciting Opportunity with Leading Tech Company Lynx is working with a renowned tech company to recruit a Senior Hardware Design Engineer. In this role you'll play a pivotal role in new product introduction as well as sustaining engineering for ground-breaking products. This is a hybrid role and also offers a bonus of 3-6%. Key Responsibilities: Design electronic circuits, subsystems, and systems covering analog, digital, and RF Schematic capture, layout, and library management Evaluate new systems and technologies for feasibility and product design Technical support for production, manufacturing, and troubleshooting Design verification, testing, and documentation Requirements: 4+ years of relevant hardware design experience Strong expertise in digital circuit design (microprocessors, FPGAs, high-speed peripherals) Solid skills in analog circuit design (power supplies, etc.) Familiarity with PCB layout, EMC/CE marking, and design for IPC Hands-on experience in PCB testing Desired: Proficiency with industry-standard design tools - Altium preferred Understanding of military/airborne design standards (MIL-STD, DO-160, etc.) Practical testing skills with scopes, analysers, JTAG boundary scan, etc. Hit apply to find out more information.
30/04/2024
Full time
Senior Hardware Design Engineer - Exciting Opportunity with Leading Tech Company Lynx is working with a renowned tech company to recruit a Senior Hardware Design Engineer. In this role you'll play a pivotal role in new product introduction as well as sustaining engineering for ground-breaking products. This is a hybrid role and also offers a bonus of 3-6%. Key Responsibilities: Design electronic circuits, subsystems, and systems covering analog, digital, and RF Schematic capture, layout, and library management Evaluate new systems and technologies for feasibility and product design Technical support for production, manufacturing, and troubleshooting Design verification, testing, and documentation Requirements: 4+ years of relevant hardware design experience Strong expertise in digital circuit design (microprocessors, FPGAs, high-speed peripherals) Solid skills in analog circuit design (power supplies, etc.) Familiarity with PCB layout, EMC/CE marking, and design for IPC Hands-on experience in PCB testing Desired: Proficiency with industry-standard design tools - Altium preferred Understanding of military/airborne design standards (MIL-STD, DO-160, etc.) Practical testing skills with scopes, analysers, JTAG boundary scan, etc. Hit apply to find out more information.
Summary: A world-leading test equipment company that helps utility companies install, protect, and maintain infrastructure networks is entering an exciting phase of hardware development. They are seeking a Senior Electronics Engineer to help shape the direction of the next generation of underground location products. This role sits within the New Product Development (NPD) team, responsible for executing the technology and product roadmaps. You will lead technical research to increase maturity and decrease risk in upcoming projects. As landscapes continuously evolve, you'll ensure roadmaps align and research feeds into robust products. Responsibilities Include: Leading and owning work packages from inception through completion Mentoring junior engineers and leading technical/cross-functional teams Providing technical interface to product management, developing concepts aligned to roadmaps Applying electronics engineering knowledge to plan, lead, and execute design tasks Developing technical solutions requiring ingenuity and creativity Requirements: Engineering degree in Electronic Engineering or similar Skilled all-round electronics designer Strong analog design, test, PSU, EMC/regulatory, simulation, manufacturing test experience Debugging of processor-based hardware Board documentation and software team liaison Extensive product development background Ability to lead and mentor technical teams Benefits Include: Competitive salary Home/office hybrid working opportunities 25 days annual leave plus option to buy 3 more Pension scheme with employer contributions Private medical cover options Cycle to work scheme Free parking Annual bonus This is an opportunity to shape cutting-edge underground utility location products for a world-leading company with an excellent work-life balance. If you have the required electronics engineering skills, apply today!
30/04/2024
Full time
Summary: A world-leading test equipment company that helps utility companies install, protect, and maintain infrastructure networks is entering an exciting phase of hardware development. They are seeking a Senior Electronics Engineer to help shape the direction of the next generation of underground location products. This role sits within the New Product Development (NPD) team, responsible for executing the technology and product roadmaps. You will lead technical research to increase maturity and decrease risk in upcoming projects. As landscapes continuously evolve, you'll ensure roadmaps align and research feeds into robust products. Responsibilities Include: Leading and owning work packages from inception through completion Mentoring junior engineers and leading technical/cross-functional teams Providing technical interface to product management, developing concepts aligned to roadmaps Applying electronics engineering knowledge to plan, lead, and execute design tasks Developing technical solutions requiring ingenuity and creativity Requirements: Engineering degree in Electronic Engineering or similar Skilled all-round electronics designer Strong analog design, test, PSU, EMC/regulatory, simulation, manufacturing test experience Debugging of processor-based hardware Board documentation and software team liaison Extensive product development background Ability to lead and mentor technical teams Benefits Include: Competitive salary Home/office hybrid working opportunities 25 days annual leave plus option to buy 3 more Pension scheme with employer contributions Private medical cover options Cycle to work scheme Free parking Annual bonus This is an opportunity to shape cutting-edge underground utility location products for a world-leading company with an excellent work-life balance. If you have the required electronics engineering skills, apply today!
Request Technology - Craig Johnson
Chicago, Illinois
*We are unable to sponsor for this permanent Full time role* *Position is bonus eligible* Prestigious Financial Company is currently seeking a Senior Windows Systems Engineer. Candidate will administer and enhance the Windows server infrastructure both on-premises and in the cloud. Candidate will have prior experience designing, supporting and administering Windows server environment. Candidate should have through hands-on experience working in cloud environments preferably AWS. The candidate will need to have excellent people skills, strong analytical and technical skills for troubleshooting complex issues. Responsibilities: Provide advanced Windows system administration, operational support, and problem resolution for a mixed Windows Server 2016 and 2019 environments Provide break/fix support for Windows Server OS and third-party application issues Troubleshoot hardware and software problems, take appropriate corrective action and/or interact with team members or vendors to work through issue resolution Automate processes to reduce hands on support Support cloud environments for Windows AMIs Participate in patching and vulnerability remediation, as needed Adhere to Change Management process Comply with all audit, compliance, and regulatory requirements Perform other duties as assigned Support On call and weekend work Qualifications: Ability to work effectively with clients, technical staff, consultants and vendors. Ability to work well under pressure and within deadlines Ability to communicate well and perform as part of a team located in multiple cities In-depth knowledge of Windows Server 2016 and 2019 administration and support Experience with Powershell commands and scripts System administration experience and knowledge of VMware and administration of virtual Servers General working knowledge of NAS, SAN, and networking Active Directory administration experience Hands-on experience with cloud based architecture especially AWS Experience with terraform, or other infrastructure as code applications Experience with build automation a plus Software deployment experience through SCCM or similar tools is a plus Vulnerability remediation experience is a plus
30/04/2024
Full time
*We are unable to sponsor for this permanent Full time role* *Position is bonus eligible* Prestigious Financial Company is currently seeking a Senior Windows Systems Engineer. Candidate will administer and enhance the Windows server infrastructure both on-premises and in the cloud. Candidate will have prior experience designing, supporting and administering Windows server environment. Candidate should have through hands-on experience working in cloud environments preferably AWS. The candidate will need to have excellent people skills, strong analytical and technical skills for troubleshooting complex issues. Responsibilities: Provide advanced Windows system administration, operational support, and problem resolution for a mixed Windows Server 2016 and 2019 environments Provide break/fix support for Windows Server OS and third-party application issues Troubleshoot hardware and software problems, take appropriate corrective action and/or interact with team members or vendors to work through issue resolution Automate processes to reduce hands on support Support cloud environments for Windows AMIs Participate in patching and vulnerability remediation, as needed Adhere to Change Management process Comply with all audit, compliance, and regulatory requirements Perform other duties as assigned Support On call and weekend work Qualifications: Ability to work effectively with clients, technical staff, consultants and vendors. Ability to work well under pressure and within deadlines Ability to communicate well and perform as part of a team located in multiple cities In-depth knowledge of Windows Server 2016 and 2019 administration and support Experience with Powershell commands and scripts System administration experience and knowledge of VMware and administration of virtual Servers General working knowledge of NAS, SAN, and networking Active Directory administration experience Hands-on experience with cloud based architecture especially AWS Experience with terraform, or other infrastructure as code applications Experience with build automation a plus Software deployment experience through SCCM or similar tools is a plus Vulnerability remediation experience is a plus