We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
20/05/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
Job Vacancy: Multi Skilled Maintenance Engineer Location: Loughborough Salary: Up to £48,000 Shift pattern: 12 hour shift, Alternating Days and Nights on a 3 week rolling pattern. We are seeking a highly skilled and adaptable Multi Skilled Maintenance Engineer for a prestigious FMCG company based in Loughborough. As a leading recruitment consultancy, we are collaborating with our client to fill this pivotal role within their organization. Key Responsibilities: Flexibility and Safety: The successful candidate will be expected to work flexibly to meet business demands while adhering to the highest standards of Good Manufacturing Practice (GMP) to ensure a safe working environment. Subject Matter Expertise: This role demands a commitment to continuously learn and adapt to evolving technologies, becoming the Subject Matter Expert (SME) in all facets of Manufacturing and Packaging equipment. Maintenance and Repair: Proficiency in fault finding, repair, and maintenance of process supply equipment and production-aligned ancillary equipment. This includes Planned, Preventative, Predictive, and Reactive maintenance on complex Mechanical, electro/Mechanical systems and process equipment, encompassing Programmable Logic Controllers (PLC), electrical, electronic, and pneumatic controls within a pharmaceutical environment. Drive for Improvement: Actively pursuing enhancements in safety, GMP, and performance within the module. Taking charge of Conditional Appraisals and Criticality Assessment activity to minimize costly breakdowns, enhance production and supporting equipment, and implement strategies to improve overall safety and reliability of plant and production processes. Requirements: A proven track record in a similar role within an FMCG or related industry. Technical proficiency in maintenance, repair, and fault finding in complex machinery and equipment. Experience working with PLCs, electrical, electronic, and pneumatic controls. Proactive approach to problem-solving and a drive for continuous improvement. Ability to work in a shift pattern including 12-hour shifts comprising a mix of days and nights. This is a fantastic opportunity for an individual looking to make a significant impact within a fast-paced and dynamic environment. The successful candidate will receive a competitive salary of up to £48,000 commensurate with their experience and skills. Benefits include: 6.5% bonus, occasional overtime paid at x1.5 or double time for nights and 17 days of Flexible holidays. If you believe you possess the skills and expertise required for this role and are enthusiastic about making a difference in the FMCG industry, please apply with your updated CV. We are looking forward to discussing this exciting opportunity further with you.
20/05/2024
Full time
Job Vacancy: Multi Skilled Maintenance Engineer Location: Loughborough Salary: Up to £48,000 Shift pattern: 12 hour shift, Alternating Days and Nights on a 3 week rolling pattern. We are seeking a highly skilled and adaptable Multi Skilled Maintenance Engineer for a prestigious FMCG company based in Loughborough. As a leading recruitment consultancy, we are collaborating with our client to fill this pivotal role within their organization. Key Responsibilities: Flexibility and Safety: The successful candidate will be expected to work flexibly to meet business demands while adhering to the highest standards of Good Manufacturing Practice (GMP) to ensure a safe working environment. Subject Matter Expertise: This role demands a commitment to continuously learn and adapt to evolving technologies, becoming the Subject Matter Expert (SME) in all facets of Manufacturing and Packaging equipment. Maintenance and Repair: Proficiency in fault finding, repair, and maintenance of process supply equipment and production-aligned ancillary equipment. This includes Planned, Preventative, Predictive, and Reactive maintenance on complex Mechanical, electro/Mechanical systems and process equipment, encompassing Programmable Logic Controllers (PLC), electrical, electronic, and pneumatic controls within a pharmaceutical environment. Drive for Improvement: Actively pursuing enhancements in safety, GMP, and performance within the module. Taking charge of Conditional Appraisals and Criticality Assessment activity to minimize costly breakdowns, enhance production and supporting equipment, and implement strategies to improve overall safety and reliability of plant and production processes. Requirements: A proven track record in a similar role within an FMCG or related industry. Technical proficiency in maintenance, repair, and fault finding in complex machinery and equipment. Experience working with PLCs, electrical, electronic, and pneumatic controls. Proactive approach to problem-solving and a drive for continuous improvement. Ability to work in a shift pattern including 12-hour shifts comprising a mix of days and nights. This is a fantastic opportunity for an individual looking to make a significant impact within a fast-paced and dynamic environment. The successful candidate will receive a competitive salary of up to £48,000 commensurate with their experience and skills. Benefits include: 6.5% bonus, occasional overtime paid at x1.5 or double time for nights and 17 days of Flexible holidays. If you believe you possess the skills and expertise required for this role and are enthusiastic about making a difference in the FMCG industry, please apply with your updated CV. We are looking forward to discussing this exciting opportunity further with you.
Mechanical Technician, fitter - Aircraft, aerospace, aviation Contract, immediate with 6 monthly extensions £competitive hourly rate Fitter, technician, mechanical, aircraft, aviation, aerospace As an Aircraft Mechanical Technician, you will be build, commission and test aircraft and related sub-systems. You will also assist with the complete development of test rigs and supporting flight test programmes. Requirements: Proven experience within aircraft/aviation maintenance/overhaul educational background in aerospace or aviation/wider engineering accreditations Good knowledge of structural production techniques, repairs & composites. Knowledge of electrical systems (HV) & aircraft/maintenance documentation (beneficial). Commercial or military aircraft experience. For a full consultation and to be considered, please apply with your up to date CV and contact details.
20/05/2024
Project-based
Mechanical Technician, fitter - Aircraft, aerospace, aviation Contract, immediate with 6 monthly extensions £competitive hourly rate Fitter, technician, mechanical, aircraft, aviation, aerospace As an Aircraft Mechanical Technician, you will be build, commission and test aircraft and related sub-systems. You will also assist with the complete development of test rigs and supporting flight test programmes. Requirements: Proven experience within aircraft/aviation maintenance/overhaul educational background in aerospace or aviation/wider engineering accreditations Good knowledge of structural production techniques, repairs & composites. Knowledge of electrical systems (HV) & aircraft/maintenance documentation (beneficial). Commercial or military aircraft experience. For a full consultation and to be considered, please apply with your up to date CV and contact details.
FIELD SERVICE ENGINEER Covering UK&IRE £40,000 - £50,000 + Excellent benefits Monday - Friday - door to door (44 hours) One of the UK's leading suppliers of highly complex process sterilisation and quality process equipment is now recruiting for a Field Service Engineer to join their busy and expanding field service engineering team to cover UK&IRE. As the field service engineer, you will be required to travel to customer sites in the pharmaceutical and life-sciences field, carrying out repair and maintenance on a diverse range of technologies including autoclaves/sterilisers, RO systems, steam generators etc. Key responsibilities as the Field Service Engineer: You will be required to travel across the UK and Ireland and will include nights away from home. Provide preventative maintenance, calibration and technical support, to a standard consistent with the high quality of the equipment and services the organisation supply and with the reasonable expectations of the customers. Undertake fault finding/rectification assignments as delegated by the management team Creating, preparing and managing servicing and calibration documentation as delegated by the management team Managing specific service spares Role specific administration such as reporting, expenses, and time sheets Proper management of the organisations equipment, including test equipment, computer equipment etc. Support the training of other Field Service Engineers Provide FAT support as required. Additional administrative duties as required, including but not limited to, protocol review, document creation as per QMS. Adhering to policies and procedures at all times Experience required - Field Service Engineer: ONC/HNC or equivalent in engineering (mechanical, electrical, electronic etc.) Multi-skilled engineer who has carried out service, repair and maintenance on industrial sized electro-mechanical machinery Industry background could be; FMCG, Ex-Military (Navy, REME, RAF etc.), Automation, Robotics, Pharmaceutical, Biotechnology, Semi-Conductor, Oil & Gas etc. Flexible to travel and stay away as and when required as a field service engineer Valid, UK driving licence Package/benefits: £40,000 - £50,000 depending on experience Company performance bonus Paid overtime x1.5 - Monday Friday any hours over 44 hrs (door to door travel) Overnight stay allowance - £20 for first night away raising an extra £10 per night for consecutive nights (Capped at £110/night). Once fully out on your own - Night 1-4 -£62 p/n, nights 5-7 - £80 p/n, nights 8 onwards is £100p/n. Lunch allowance Company vehicle included for personal use or the option for business use only Company Pension scheme 25 dyas holiday + bank Company phone & laptop Tools and uniform supplied Annual salary reviews (linked to inflation) plus continuously review salary in relation to performance. If you are and experienced multi-skilled field service engineer interested in making an application, please click APPLY NOW and a CBSbutler representative will be in touch to discuss this exciting opportunity.
20/05/2024
Full time
FIELD SERVICE ENGINEER Covering UK&IRE £40,000 - £50,000 + Excellent benefits Monday - Friday - door to door (44 hours) One of the UK's leading suppliers of highly complex process sterilisation and quality process equipment is now recruiting for a Field Service Engineer to join their busy and expanding field service engineering team to cover UK&IRE. As the field service engineer, you will be required to travel to customer sites in the pharmaceutical and life-sciences field, carrying out repair and maintenance on a diverse range of technologies including autoclaves/sterilisers, RO systems, steam generators etc. Key responsibilities as the Field Service Engineer: You will be required to travel across the UK and Ireland and will include nights away from home. Provide preventative maintenance, calibration and technical support, to a standard consistent with the high quality of the equipment and services the organisation supply and with the reasonable expectations of the customers. Undertake fault finding/rectification assignments as delegated by the management team Creating, preparing and managing servicing and calibration documentation as delegated by the management team Managing specific service spares Role specific administration such as reporting, expenses, and time sheets Proper management of the organisations equipment, including test equipment, computer equipment etc. Support the training of other Field Service Engineers Provide FAT support as required. Additional administrative duties as required, including but not limited to, protocol review, document creation as per QMS. Adhering to policies and procedures at all times Experience required - Field Service Engineer: ONC/HNC or equivalent in engineering (mechanical, electrical, electronic etc.) Multi-skilled engineer who has carried out service, repair and maintenance on industrial sized electro-mechanical machinery Industry background could be; FMCG, Ex-Military (Navy, REME, RAF etc.), Automation, Robotics, Pharmaceutical, Biotechnology, Semi-Conductor, Oil & Gas etc. Flexible to travel and stay away as and when required as a field service engineer Valid, UK driving licence Package/benefits: £40,000 - £50,000 depending on experience Company performance bonus Paid overtime x1.5 - Monday Friday any hours over 44 hrs (door to door travel) Overnight stay allowance - £20 for first night away raising an extra £10 per night for consecutive nights (Capped at £110/night). Once fully out on your own - Night 1-4 -£62 p/n, nights 5-7 - £80 p/n, nights 8 onwards is £100p/n. Lunch allowance Company vehicle included for personal use or the option for business use only Company Pension scheme 25 dyas holiday + bank Company phone & laptop Tools and uniform supplied Annual salary reviews (linked to inflation) plus continuously review salary in relation to performance. If you are and experienced multi-skilled field service engineer interested in making an application, please click APPLY NOW and a CBSbutler representative will be in touch to discuss this exciting opportunity.
*Hybrid, 3 days onsite, 2 days remote* *We are unable to sponsor as this is a permanent Full time role* A prestigious company is looking for a Sr. .NET Product Engineer. This engineer will be doing full stack custom application development. They will work with .Net, C#, MVC, Javascript, jQuery, HTML 5, etc. Responsibilities: The Sr .NET Product Engineer I is responsible for delivering custom business solutions using the Microsoft technology stack. The individual will drive the design and development of user interfaces, business objectives and overall infrastructure. Analyze, design, configure, develop and implement intermediate-level solutions to meet business needs and objectives. Provide Level 3 support. Investigates operational or systematic problems and provides resolution using intermediate analytical skills and tools as necessary. Prepare project proposals and develop project plans. May lead small projects. Maintain up-to-date awareness of current and future directions of business industry and associated technologies. Investigate and document present procedures as liaison with user departments. May develop and maintain application security, design and documentation according to legal compliance requirements. Qualifications & Requirements A Bachelor's Degree is preferred in mechanical, computer, or electrical engineering discipline. 8 plus years of software development experience with 6 plus years of web-based software development in .NET technologies (C#, .NET Framework, .NET Core, Docker, MVC, SQL Server). Prior experience developing MSOffice add-Ins in Word, Outlook and Excel Prior experience with ASP.NET MVC (versions 4 and up), .NET Core, WCF, Restful services, JavaScript, jQuery, HTML5/CSS3, React, responsive design, and Dependency Injection frameworks are desired. Experience with ORM with different tools such as Entity Framework and LINQ. Experience working with container-based solutions Experience with continuous integration with Azure DevOps, Git (or similar). Should have strong understanding of SOA, TDD, SOLID principles, and systems architecture concepts. Must be familiar with agile or other iterative development methodologies. Technologies/Software Must understand Microsoft Windows Operating system architecture Must understand Microsoft Windows Office System Ability to participate in all aspects of application SDLC including Agile methodologies Must have experience the Microsoft Visual Studio and ADO Must participate in daily team scrums and code reviews Must understand Microsoft SQL Server Microsoft Visual Studio 2019/2021 Azure DevOps .NET Framework, .NET Core, Rest API services, WCF Services C#, VB.NET, JQuery, JavaScript, Typescript, React, LINQ, HTML5, CSS3, Bootstrap SQL Server, PostgreSQL Docker MVC Framework Entity Framework Knowledge of SOA (Service Oriented Architecture) and N-Tier Architecture.
17/05/2024
Full time
*Hybrid, 3 days onsite, 2 days remote* *We are unable to sponsor as this is a permanent Full time role* A prestigious company is looking for a Sr. .NET Product Engineer. This engineer will be doing full stack custom application development. They will work with .Net, C#, MVC, Javascript, jQuery, HTML 5, etc. Responsibilities: The Sr .NET Product Engineer I is responsible for delivering custom business solutions using the Microsoft technology stack. The individual will drive the design and development of user interfaces, business objectives and overall infrastructure. Analyze, design, configure, develop and implement intermediate-level solutions to meet business needs and objectives. Provide Level 3 support. Investigates operational or systematic problems and provides resolution using intermediate analytical skills and tools as necessary. Prepare project proposals and develop project plans. May lead small projects. Maintain up-to-date awareness of current and future directions of business industry and associated technologies. Investigate and document present procedures as liaison with user departments. May develop and maintain application security, design and documentation according to legal compliance requirements. Qualifications & Requirements A Bachelor's Degree is preferred in mechanical, computer, or electrical engineering discipline. 8 plus years of software development experience with 6 plus years of web-based software development in .NET technologies (C#, .NET Framework, .NET Core, Docker, MVC, SQL Server). Prior experience developing MSOffice add-Ins in Word, Outlook and Excel Prior experience with ASP.NET MVC (versions 4 and up), .NET Core, WCF, Restful services, JavaScript, jQuery, HTML5/CSS3, React, responsive design, and Dependency Injection frameworks are desired. Experience with ORM with different tools such as Entity Framework and LINQ. Experience working with container-based solutions Experience with continuous integration with Azure DevOps, Git (or similar). Should have strong understanding of SOA, TDD, SOLID principles, and systems architecture concepts. Must be familiar with agile or other iterative development methodologies. Technologies/Software Must understand Microsoft Windows Operating system architecture Must understand Microsoft Windows Office System Ability to participate in all aspects of application SDLC including Agile methodologies Must have experience the Microsoft Visual Studio and ADO Must participate in daily team scrums and code reviews Must understand Microsoft SQL Server Microsoft Visual Studio 2019/2021 Azure DevOps .NET Framework, .NET Core, Rest API services, WCF Services C#, VB.NET, JQuery, JavaScript, Typescript, React, LINQ, HTML5, CSS3, Bootstrap SQL Server, PostgreSQL Docker MVC Framework Entity Framework Knowledge of SOA (Service Oriented Architecture) and N-Tier Architecture.
Wireperson | Stone (Staffordshire) | £27,000 pa | Fully on-site | NVQ 1 + Level Needed Yolk Recruitment are working with a market leader in advanced system integration within the energy sector. They're investing heavily in their Stone site and are looking for an experienced Wireperson to join their energy division. If successful you will join an experienced team working within the Electrical control wire assembly and test team working across a variety of small and large scale projects for clients within the energy industry. Due to the industry you will need to be eligible for BPSS clearance. This is what you will be doing: The assembly and wiring of electrical components, of varying size and complexity using drawings, parts lists and specifications Mechanical assembly of cubicles and framework Bench assembly of electrical sub-assemblies Quality of own work and rework identified during inspection and test Working to agreed on company standards and procedures Completion of assembly record cards to ensure traceability and identification of serial numbered components Updating electronic issues log and communicating directly with responsible design engineers The experience you will bring to the team: At least 2 years experience Ability to read and understand electrical schematic drawings Ability to manage your time to successfully complete all assigned tasks within agreed timescales Experience leading a production Bay to ensure everyone within that Bay is working to the correct standards Experience completing assembly record cards. What you will receive in return: Private medical insurance Attractive pension package 25 days holiday (bank holidays on top) Flexible working options
17/05/2024
Full time
Wireperson | Stone (Staffordshire) | £27,000 pa | Fully on-site | NVQ 1 + Level Needed Yolk Recruitment are working with a market leader in advanced system integration within the energy sector. They're investing heavily in their Stone site and are looking for an experienced Wireperson to join their energy division. If successful you will join an experienced team working within the Electrical control wire assembly and test team working across a variety of small and large scale projects for clients within the energy industry. Due to the industry you will need to be eligible for BPSS clearance. This is what you will be doing: The assembly and wiring of electrical components, of varying size and complexity using drawings, parts lists and specifications Mechanical assembly of cubicles and framework Bench assembly of electrical sub-assemblies Quality of own work and rework identified during inspection and test Working to agreed on company standards and procedures Completion of assembly record cards to ensure traceability and identification of serial numbered components Updating electronic issues log and communicating directly with responsible design engineers The experience you will bring to the team: At least 2 years experience Ability to read and understand electrical schematic drawings Ability to manage your time to successfully complete all assigned tasks within agreed timescales Experience leading a production Bay to ensure everyone within that Bay is working to the correct standards Experience completing assembly record cards. What you will receive in return: Private medical insurance Attractive pension package 25 days holiday (bank holidays on top) Flexible working options
Required for a 12 month initial contract working for a next-gen Li-ion battery manufacturer, a Compliance Specialist to ensure battery systems meet all relevant legislative and market-specific standards to facilitate global market access. Responsibilities: - Identify and interpret regulatory requirements for battery system products to ensure compliance. - Work with engineering teams to derive product requirements and integrate these requirements into our Requirements Management tool. - Regularly update and communicate changes in compliance standards to engineering teams. - Collaborate with engineering, business development, and technical project managers to research and validate regulatory requirements. - Manage documentation and certifications necessary for compliance, including interfacing with third-party test labs and certification bodies. - Act as the primary contact for certification bodies and maintain strategic compliance alignment. - Serve as the main point of contact for internal and external technical experts on compliance issues. Experience: - 5-10 years of relevant or similar experience - Technically proficient in areas of Electrical and Mechanical engineering - Preferably experience in applying current European and American Directives/Standards for Lithium-ion battery products. - Experience in certification of products within and outside Europe - Excellent English written and oral communication skills, with experience of delivery to a variety of internal and external stakeholders of varying seniorities. - Ability to work under high pressure and tight deadlines, excellent time management. To arrange a Teams interview, please email in the first instance your CV to (see below) WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
17/05/2024
Project-based
Required for a 12 month initial contract working for a next-gen Li-ion battery manufacturer, a Compliance Specialist to ensure battery systems meet all relevant legislative and market-specific standards to facilitate global market access. Responsibilities: - Identify and interpret regulatory requirements for battery system products to ensure compliance. - Work with engineering teams to derive product requirements and integrate these requirements into our Requirements Management tool. - Regularly update and communicate changes in compliance standards to engineering teams. - Collaborate with engineering, business development, and technical project managers to research and validate regulatory requirements. - Manage documentation and certifications necessary for compliance, including interfacing with third-party test labs and certification bodies. - Act as the primary contact for certification bodies and maintain strategic compliance alignment. - Serve as the main point of contact for internal and external technical experts on compliance issues. Experience: - 5-10 years of relevant or similar experience - Technically proficient in areas of Electrical and Mechanical engineering - Preferably experience in applying current European and American Directives/Standards for Lithium-ion battery products. - Experience in certification of products within and outside Europe - Excellent English written and oral communication skills, with experience of delivery to a variety of internal and external stakeholders of varying seniorities. - Ability to work under high pressure and tight deadlines, excellent time management. To arrange a Teams interview, please email in the first instance your CV to (see below) WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
iO Associates have partnered with we specialist defence IT and Engineering company based in London Luton Airport in the search for a Multi Skilled Maintenance Technician. As the Maintenance technician you will be responsible for planned and reactive maintenance of HBS, Arrivals and central search systems at LLA. Working as part of a team with 2 maintenance technicians per 12 hour shift you will be fault finding skills on automated PLC controlled conveyor systems/sortation systems and Helping with preparing fault and monthly system reports. You'll be using your good communication skills with customers and will be reporting and maintenance record keeping via the PPM management system. To be successful for this role you will need: NVQ Level 3/City and Guilds Electrical/Mechanical or Equivalent Multi skilled technician Experience of fault finding on PLC/Scada systems. ( Modicon or Siemens preferred) Fault finding on control panels, network and bus systems Ability to read electrical drawing Good communication skills PC literate with ability to structure and write reports Proven experience of reactive and planned maintenance Checkable 5 year work history DBS The shift pattern is shift is 2 weeks of days, then 2 weeks of nights, 12 hour shifts. Week 1 - Weds and Thursday - Days Week 2 - Mon, Tues and Fri, Sat, Sun - Days Week 3 - Float week to cover sickness and holiday. 2-4 shifts depending on what sick/holiday is on that week. Nights Week 4 - Nights on same days as week 2. The salary is circa.£46,000 including shift allowance. Some overtime could be available. If you meet most of these criteria and you would like to find out more, don't hesitate to get in touch and apply today!
17/05/2024
Full time
iO Associates have partnered with we specialist defence IT and Engineering company based in London Luton Airport in the search for a Multi Skilled Maintenance Technician. As the Maintenance technician you will be responsible for planned and reactive maintenance of HBS, Arrivals and central search systems at LLA. Working as part of a team with 2 maintenance technicians per 12 hour shift you will be fault finding skills on automated PLC controlled conveyor systems/sortation systems and Helping with preparing fault and monthly system reports. You'll be using your good communication skills with customers and will be reporting and maintenance record keeping via the PPM management system. To be successful for this role you will need: NVQ Level 3/City and Guilds Electrical/Mechanical or Equivalent Multi skilled technician Experience of fault finding on PLC/Scada systems. ( Modicon or Siemens preferred) Fault finding on control panels, network and bus systems Ability to read electrical drawing Good communication skills PC literate with ability to structure and write reports Proven experience of reactive and planned maintenance Checkable 5 year work history DBS The shift pattern is shift is 2 weeks of days, then 2 weeks of nights, 12 hour shifts. Week 1 - Weds and Thursday - Days Week 2 - Mon, Tues and Fri, Sat, Sun - Days Week 3 - Float week to cover sickness and holiday. 2-4 shifts depending on what sick/holiday is on that week. Nights Week 4 - Nights on same days as week 2. The salary is circa.£46,000 including shift allowance. Some overtime could be available. If you meet most of these criteria and you would like to find out more, don't hesitate to get in touch and apply today!
Your new company Founded in 1987, our client is the UK's leading facilities management and professional services company. Across the country, our 77,500 people look after a large, diverse, blue chip customer base, from banks and retailers, to hospitals, schools and critical government strategic assets. We take care of our customers' people and buildings, by delivering the basics brilliantly and deploying advanced technology. Your new role Ensure compliance with statutory health and safety regulations.Provide technical advice related to HTM (Healthcare Technical Memoranda). Oversee Safe Systems of Work implementation and administration. Offer Technical advice to engineers and other staff Root cause analysis of problems Auditing/Inspection What you'll need to succeed Background in engineering - either electrical or mechanical biasFamiliarity with HTM guidelines is desirable IENG or working towards this LV, HV and AP experience are highly desirable Personality Skills: Strong communication, problem-solving, and leadership skills. Clean driving licence One of the below would be useful: HTM-01 - Decontamination HTM-02 - Medical Gasses HTM-03 - Ventilation HTM-04 - Water HTM-05 - Fire HTM-06 - Electrical HTM 07 - Environment HTM 08 - Specialist Services (Lifts) . Pressure Systems Water Gas Fire Mgr Boiler Operator Accred Scheme (BOAS) Fuels & Oils Excavations Confined Spaces Working at Height What you'll get in return Training and upskilling opportunities Internal promotion opportunities Pension scheme Holidays Cycle to work scheme Employee shares scheme Car allowance or vehicle provided What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. Hays Talent Solutions is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.
16/05/2024
Full time
Your new company Founded in 1987, our client is the UK's leading facilities management and professional services company. Across the country, our 77,500 people look after a large, diverse, blue chip customer base, from banks and retailers, to hospitals, schools and critical government strategic assets. We take care of our customers' people and buildings, by delivering the basics brilliantly and deploying advanced technology. Your new role Ensure compliance with statutory health and safety regulations.Provide technical advice related to HTM (Healthcare Technical Memoranda). Oversee Safe Systems of Work implementation and administration. Offer Technical advice to engineers and other staff Root cause analysis of problems Auditing/Inspection What you'll need to succeed Background in engineering - either electrical or mechanical biasFamiliarity with HTM guidelines is desirable IENG or working towards this LV, HV and AP experience are highly desirable Personality Skills: Strong communication, problem-solving, and leadership skills. Clean driving licence One of the below would be useful: HTM-01 - Decontamination HTM-02 - Medical Gasses HTM-03 - Ventilation HTM-04 - Water HTM-05 - Fire HTM-06 - Electrical HTM 07 - Environment HTM 08 - Specialist Services (Lifts) . Pressure Systems Water Gas Fire Mgr Boiler Operator Accred Scheme (BOAS) Fuels & Oils Excavations Confined Spaces Working at Height What you'll get in return Training and upskilling opportunities Internal promotion opportunities Pension scheme Holidays Cycle to work scheme Employee shares scheme Car allowance or vehicle provided What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. Hays Talent Solutions is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.
My client based in Canterbury are urgently looking for an Administrator to join the team on an initial 4 month contract. The suitable Administrator must have worked in an Engineering/Mechanical/Electrical/Electronics environment. The Administrator will ideally have experience with PLM Systems and software, implementing various error codes This role will also involve manually entering and transferring data into a new system from old records. Any knowledge of CAD tools is also beneficial. For more information and a confidential chat about the role please contact Mimi (see below) By applying to this advert you are giving CPS Group (UK) Ltd authority to hold and process your data for this specific role and any other roles we may deem suitable to you over time. We will not pass your data to any third party without your verbal or written permission to do so. All incoming and outgoing calls are recorded for training and compliance purposes. CPS Group (UK) Ltd is acting as an Employment Agency in relation to this vacancy. Our new privacy policy can be found on our website
16/05/2024
Project-based
My client based in Canterbury are urgently looking for an Administrator to join the team on an initial 4 month contract. The suitable Administrator must have worked in an Engineering/Mechanical/Electrical/Electronics environment. The Administrator will ideally have experience with PLM Systems and software, implementing various error codes This role will also involve manually entering and transferring data into a new system from old records. Any knowledge of CAD tools is also beneficial. For more information and a confidential chat about the role please contact Mimi (see below) By applying to this advert you are giving CPS Group (UK) Ltd authority to hold and process your data for this specific role and any other roles we may deem suitable to you over time. We will not pass your data to any third party without your verbal or written permission to do so. All incoming and outgoing calls are recorded for training and compliance purposes. CPS Group (UK) Ltd is acting as an Employment Agency in relation to this vacancy. Our new privacy policy can be found on our website
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
16/05/2024
Full time
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
Position Overview: We are currently seeking a Mid-Level Design Manager for a full-time, permanent position. Based in Hull. A Bit About You: Are you an experienced design professional eager to take on a significant role in a dynamic team? We're looking for a results-driven Mid-Level Design Manager to coordinate design efforts on a high-profile project. This role involves managing various aspects of design, including Civils, Structural, Architectural, Mechanical, Electrical, IT, and Robotics/MHE. Key Responsibilities: Coordinate and manage design activities with consultant designers and subcontractors. Ensure smooth coordination of the entire design process from project inception to client launch. Lead and participate in design meetings, fostering collaboration among diverse stakeholders. Apply expertise in logistics construction and design management using BIM360. Oversee client direct vendors involved in Mechanical, Electrical, IT, and Robotics/MHE. Requirements: Proven experience in design management, ideally in logistics construction. Familiarity with BIM360 is advantageous. Strong leadership and coordination skills with the ability to guide a team to success. Flexibility to work on-site (Hull) and lead design meetings Passion for delivering excellence and driving results. What the Client Offers: Opportunity to contribute to a high-profile project with a significant budget. Collaborative and growth-focused work environment. Competitive compensation.
16/05/2024
Full time
Position Overview: We are currently seeking a Mid-Level Design Manager for a full-time, permanent position. Based in Hull. A Bit About You: Are you an experienced design professional eager to take on a significant role in a dynamic team? We're looking for a results-driven Mid-Level Design Manager to coordinate design efforts on a high-profile project. This role involves managing various aspects of design, including Civils, Structural, Architectural, Mechanical, Electrical, IT, and Robotics/MHE. Key Responsibilities: Coordinate and manage design activities with consultant designers and subcontractors. Ensure smooth coordination of the entire design process from project inception to client launch. Lead and participate in design meetings, fostering collaboration among diverse stakeholders. Apply expertise in logistics construction and design management using BIM360. Oversee client direct vendors involved in Mechanical, Electrical, IT, and Robotics/MHE. Requirements: Proven experience in design management, ideally in logistics construction. Familiarity with BIM360 is advantageous. Strong leadership and coordination skills with the ability to guide a team to success. Flexibility to work on-site (Hull) and lead design meetings Passion for delivering excellence and driving results. What the Client Offers: Opportunity to contribute to a high-profile project with a significant budget. Collaborative and growth-focused work environment. Competitive compensation.
We are looking for an experience Panel designer familiar with Autodad Electrical to expand our existing Panel design team to ensure production of accurate panel wiring diagrams and topologies based on information supplied by design managers, design engineers, engineering manager or technical director. The flexible role will primarily be based in our Coulsdon office however may require occasional travel to our project offices based in and around London. Technical Requirements: * Has detailed working knowledge and experience of working with AutoCAD Electrical (2022). * Has technical design experience within the construction/panel building industry * Has relevant technical accreditations and qualifications. * Sound working knowledge of building services mechanical and electrical systems. * Understanding of electrical supply requirements for control and MCC panels. * Understanding of relay logic and the ability to map out/design safety circuits. * Sound working knowledge of one or more building management systems (preferably but not limited to Trend, Distech, Tridium & Delta). * Sound working knowledge of office tools such as Microsoft Excel, Word, Access, Outlook, Sharepoint etc. * Attends training courses and keeps abreast of developments within industry.
15/05/2024
Full time
We are looking for an experience Panel designer familiar with Autodad Electrical to expand our existing Panel design team to ensure production of accurate panel wiring diagrams and topologies based on information supplied by design managers, design engineers, engineering manager or technical director. The flexible role will primarily be based in our Coulsdon office however may require occasional travel to our project offices based in and around London. Technical Requirements: * Has detailed working knowledge and experience of working with AutoCAD Electrical (2022). * Has technical design experience within the construction/panel building industry * Has relevant technical accreditations and qualifications. * Sound working knowledge of building services mechanical and electrical systems. * Understanding of electrical supply requirements for control and MCC panels. * Understanding of relay logic and the ability to map out/design safety circuits. * Sound working knowledge of one or more building management systems (preferably but not limited to Trend, Distech, Tridium & Delta). * Sound working knowledge of office tools such as Microsoft Excel, Word, Access, Outlook, Sharepoint etc. * Attends training courses and keeps abreast of developments within industry.
Request Technology - Craig Johnson
New York, New York
*We are unable to sponsor for this permanent Full time role* *Position is bonus eligible* Prestigious Global Firm is currently seeking a Senior .NET Product Engineer with Azure experience. Candidate will be responsible for delivering custom business solutions using the Microsoft technology stack. The individual will lead and coordinate projects from a technology perspective, following secure SDLC activities and standards that are consistent with best practices. The individual will drive the design and development of user interfaces, business objectives and overall infrastructure. Responsibilities: Analyze, design, configure, develop and implement intermediate-level solutions to meet business needs and objectives. Work, as directed, with business owners, other IT teams, and vendors to create integrations both to/from vendors. Provide Level 3 support. Investigates operational or systematic problems and provides resolution using intermediate analytical skills and tools as necessary. Prepare project proposals and develop project plans. May lead small projects. Maintain up-to-date awareness of current and future directions of business industry and associated technologies. Investigate and document present procedures as liaison with user departments. May develop and maintain application security, design and documentation according to legal compliance requirements. Effectively listens to understand and articulates technical and non-technical information (both written and oral formats) to customers, peers and/or management in a one-on-one or team context with some oversight. Provides production support activities, including advanced technical writing. Documents small to medium scale projects with some supervision, and may be involved in developing and delivering presentations to aid in custom product development decision making. Manages organizational development by dissecting complex situations and refocusing on the most critical technology tasks. Contributes through technical expertise/professional experience in solving problems and/or delivering on opportunities facing the team or group. Provides feedback to management on strategic recommendations. Fosters environment of innovation and change. Aligns changes with the organization's strategic direction and objectives and customer expectations. Recognizes the scope of problems and understands the impact of changes on others. Identifies short and long-range organizational needs. Creates a clear focus on internal and external customer needs. Qualifications: Bachelor's Degree is preferred in mechanical, computer, or electrical engineering discipline. 8 plus years of software development experience with 6 plus years of web-based software development in .NET technologies (C#, .NET Framework, .NET Core, Docker, MVC, SQL Server). Prior experience developing MSOffice add-Ins in Word, Outlook and Excel Prior experience with ASP.NET MVC (versions 4 and up), .NET Core, WCF, Restful services, JavaScript, jQuery, HTML5/CSS3, React, responsive design, and Dependency Injection frameworks are desired. Experience with ORM with different tools such as Entity Framework and LINQ. Experience working with container-based solutions Experience with continuous integration with Azure DevOps, Git (or similar). Should have strong understanding of SOA, TDD, SOLID principles, and systems architecture concepts. Must be familiar with agile or other iterative development methodologies. Must possess requirement and component level estimation, database design and development skills. Experience in a law firm or global professional services environment preferred. Knowledge of Microsoft Azure technologies. Working with low code platforms like IntApp platform is a plus. Must understand Microsoft Windows Operating system architecture Must understand Microsoft Windows Office System Ability to participate in all aspects of application SDLC including Agile methodologies Must have experience the Microsoft Visual Studio and ADO Must participate in daily team scrums and code reviews Must understand Microsoft SQL Server Technologies: Microsoft Visual Studio 2019/2021 Azure DevOps .NET Framework, .NET Core, Rest API services, WCF Services C#, VB.NET, JQuery, JavaScript, Typescript, React, LINQ, HTML5, CSS3, Bootstrap SQL Server, PostgreSQL Docker MVC Framework Entity Framework Knowledge of SOA (Service Oriented Architecture) and N-Tier Architecture. Advanced Awareness of the Software Development Life Cycle and development methodology (ie Scrum Agile)
14/05/2024
Full time
*We are unable to sponsor for this permanent Full time role* *Position is bonus eligible* Prestigious Global Firm is currently seeking a Senior .NET Product Engineer with Azure experience. Candidate will be responsible for delivering custom business solutions using the Microsoft technology stack. The individual will lead and coordinate projects from a technology perspective, following secure SDLC activities and standards that are consistent with best practices. The individual will drive the design and development of user interfaces, business objectives and overall infrastructure. Responsibilities: Analyze, design, configure, develop and implement intermediate-level solutions to meet business needs and objectives. Work, as directed, with business owners, other IT teams, and vendors to create integrations both to/from vendors. Provide Level 3 support. Investigates operational or systematic problems and provides resolution using intermediate analytical skills and tools as necessary. Prepare project proposals and develop project plans. May lead small projects. Maintain up-to-date awareness of current and future directions of business industry and associated technologies. Investigate and document present procedures as liaison with user departments. May develop and maintain application security, design and documentation according to legal compliance requirements. Effectively listens to understand and articulates technical and non-technical information (both written and oral formats) to customers, peers and/or management in a one-on-one or team context with some oversight. Provides production support activities, including advanced technical writing. Documents small to medium scale projects with some supervision, and may be involved in developing and delivering presentations to aid in custom product development decision making. Manages organizational development by dissecting complex situations and refocusing on the most critical technology tasks. Contributes through technical expertise/professional experience in solving problems and/or delivering on opportunities facing the team or group. Provides feedback to management on strategic recommendations. Fosters environment of innovation and change. Aligns changes with the organization's strategic direction and objectives and customer expectations. Recognizes the scope of problems and understands the impact of changes on others. Identifies short and long-range organizational needs. Creates a clear focus on internal and external customer needs. Qualifications: Bachelor's Degree is preferred in mechanical, computer, or electrical engineering discipline. 8 plus years of software development experience with 6 plus years of web-based software development in .NET technologies (C#, .NET Framework, .NET Core, Docker, MVC, SQL Server). Prior experience developing MSOffice add-Ins in Word, Outlook and Excel Prior experience with ASP.NET MVC (versions 4 and up), .NET Core, WCF, Restful services, JavaScript, jQuery, HTML5/CSS3, React, responsive design, and Dependency Injection frameworks are desired. Experience with ORM with different tools such as Entity Framework and LINQ. Experience working with container-based solutions Experience with continuous integration with Azure DevOps, Git (or similar). Should have strong understanding of SOA, TDD, SOLID principles, and systems architecture concepts. Must be familiar with agile or other iterative development methodologies. Must possess requirement and component level estimation, database design and development skills. Experience in a law firm or global professional services environment preferred. Knowledge of Microsoft Azure technologies. Working with low code platforms like IntApp platform is a plus. Must understand Microsoft Windows Operating system architecture Must understand Microsoft Windows Office System Ability to participate in all aspects of application SDLC including Agile methodologies Must have experience the Microsoft Visual Studio and ADO Must participate in daily team scrums and code reviews Must understand Microsoft SQL Server Technologies: Microsoft Visual Studio 2019/2021 Azure DevOps .NET Framework, .NET Core, Rest API services, WCF Services C#, VB.NET, JQuery, JavaScript, Typescript, React, LINQ, HTML5, CSS3, Bootstrap SQL Server, PostgreSQL Docker MVC Framework Entity Framework Knowledge of SOA (Service Oriented Architecture) and N-Tier Architecture. Advanced Awareness of the Software Development Life Cycle and development methodology (ie Scrum Agile)
*We are unable to sponsor for this permanent Full time role* *Position is bonus eligible* Prestigious Global Firm is currently seeking a Senior .NET Product Engineer with Azure experience. Candidate will be responsible for delivering custom business solutions using the Microsoft technology stack. The individual will lead and coordinate projects from a technology perspective, following secure SDLC activities and standards that are consistent with best practices. The individual will drive the design and development of user interfaces, business objectives and overall infrastructure. Responsibilities: Analyze, design, configure, develop and implement intermediate-level solutions to meet business needs and objectives. Work, as directed, with business owners, other IT teams, and vendors to create integrations both to/from vendors. Provide Level 3 support. Investigates operational or systematic problems and provides resolution using intermediate analytical skills and tools as necessary. Prepare project proposals and develop project plans. May lead small projects. Maintain up-to-date awareness of current and future directions of business industry and associated technologies. Investigate and document present procedures as liaison with user departments. May develop and maintain application security, design and documentation according to legal compliance requirements. Effectively listens to understand and articulates technical and non-technical information (both written and oral formats) to customers, peers and/or management in a one-on-one or team context with some oversight. Provides production support activities, including advanced technical writing. Documents small to medium scale projects with some supervision, and may be involved in developing and delivering presentations to aid in custom product development decision making. Manages organizational development by dissecting complex situations and refocusing on the most critical technology tasks. Contributes through technical expertise/professional experience in solving problems and/or delivering on opportunities facing the team or group. Provides feedback to management on strategic recommendations. Fosters environment of innovation and change. Aligns changes with the organization's strategic direction and objectives and customer expectations. Recognizes the scope of problems and understands the impact of changes on others. Identifies short and long-range organizational needs. Creates a clear focus on internal and external customer needs. Qualifications: Bachelor's Degree is preferred in mechanical, computer, or electrical engineering discipline. 8 plus years of software development experience with 6 plus years of web-based software development in .NET technologies (C#, .NET Framework, .NET Core, Docker, MVC, SQL Server). Prior experience developing MSOffice add-Ins in Word, Outlook and Excel Prior experience with ASP.NET MVC (versions 4 and up), .NET Core, WCF, Restful services, JavaScript, jQuery, HTML5/CSS3, React, responsive design, and Dependency Injection frameworks are desired. Experience with ORM with different tools such as Entity Framework and LINQ. Experience working with container-based solutions Experience with continuous integration with Azure DevOps, Git (or similar). Should have strong understanding of SOA, TDD, SOLID principles, and systems architecture concepts. Must be familiar with agile or other iterative development methodologies. Must possess requirement and component level estimation, database design and development skills. Experience in a law firm or global professional services environment preferred. Knowledge of Microsoft Azure technologies. Working with low code platforms like IntApp platform is a plus. Must understand Microsoft Windows Operating system architecture Must understand Microsoft Windows Office System Ability to participate in all aspects of application SDLC including Agile methodologies Must have experience the Microsoft Visual Studio and ADO Must participate in daily team scrums and code reviews Must understand Microsoft SQL Server Technologies: Microsoft Visual Studio 2019/2021 Azure DevOps .NET Framework, .NET Core, Rest API services, WCF Services C#, VB.NET, JQuery, JavaScript, Typescript, React, LINQ, HTML5, CSS3, Bootstrap SQL Server, PostgreSQL Docker MVC Framework Entity Framework Knowledge of SOA (Service Oriented Architecture) and N-Tier Architecture. Advanced Awareness of the Software Development Life Cycle and development methodology (ie Scrum Agile)
14/05/2024
Full time
*We are unable to sponsor for this permanent Full time role* *Position is bonus eligible* Prestigious Global Firm is currently seeking a Senior .NET Product Engineer with Azure experience. Candidate will be responsible for delivering custom business solutions using the Microsoft technology stack. The individual will lead and coordinate projects from a technology perspective, following secure SDLC activities and standards that are consistent with best practices. The individual will drive the design and development of user interfaces, business objectives and overall infrastructure. Responsibilities: Analyze, design, configure, develop and implement intermediate-level solutions to meet business needs and objectives. Work, as directed, with business owners, other IT teams, and vendors to create integrations both to/from vendors. Provide Level 3 support. Investigates operational or systematic problems and provides resolution using intermediate analytical skills and tools as necessary. Prepare project proposals and develop project plans. May lead small projects. Maintain up-to-date awareness of current and future directions of business industry and associated technologies. Investigate and document present procedures as liaison with user departments. May develop and maintain application security, design and documentation according to legal compliance requirements. Effectively listens to understand and articulates technical and non-technical information (both written and oral formats) to customers, peers and/or management in a one-on-one or team context with some oversight. Provides production support activities, including advanced technical writing. Documents small to medium scale projects with some supervision, and may be involved in developing and delivering presentations to aid in custom product development decision making. Manages organizational development by dissecting complex situations and refocusing on the most critical technology tasks. Contributes through technical expertise/professional experience in solving problems and/or delivering on opportunities facing the team or group. Provides feedback to management on strategic recommendations. Fosters environment of innovation and change. Aligns changes with the organization's strategic direction and objectives and customer expectations. Recognizes the scope of problems and understands the impact of changes on others. Identifies short and long-range organizational needs. Creates a clear focus on internal and external customer needs. Qualifications: Bachelor's Degree is preferred in mechanical, computer, or electrical engineering discipline. 8 plus years of software development experience with 6 plus years of web-based software development in .NET technologies (C#, .NET Framework, .NET Core, Docker, MVC, SQL Server). Prior experience developing MSOffice add-Ins in Word, Outlook and Excel Prior experience with ASP.NET MVC (versions 4 and up), .NET Core, WCF, Restful services, JavaScript, jQuery, HTML5/CSS3, React, responsive design, and Dependency Injection frameworks are desired. Experience with ORM with different tools such as Entity Framework and LINQ. Experience working with container-based solutions Experience with continuous integration with Azure DevOps, Git (or similar). Should have strong understanding of SOA, TDD, SOLID principles, and systems architecture concepts. Must be familiar with agile or other iterative development methodologies. Must possess requirement and component level estimation, database design and development skills. Experience in a law firm or global professional services environment preferred. Knowledge of Microsoft Azure technologies. Working with low code platforms like IntApp platform is a plus. Must understand Microsoft Windows Operating system architecture Must understand Microsoft Windows Office System Ability to participate in all aspects of application SDLC including Agile methodologies Must have experience the Microsoft Visual Studio and ADO Must participate in daily team scrums and code reviews Must understand Microsoft SQL Server Technologies: Microsoft Visual Studio 2019/2021 Azure DevOps .NET Framework, .NET Core, Rest API services, WCF Services C#, VB.NET, JQuery, JavaScript, Typescript, React, LINQ, HTML5, CSS3, Bootstrap SQL Server, PostgreSQL Docker MVC Framework Entity Framework Knowledge of SOA (Service Oriented Architecture) and N-Tier Architecture. Advanced Awareness of the Software Development Life Cycle and development methodology (ie Scrum Agile)
Lynx are looking for a Senior Electrical Engineer for one of our amazing MEP clients. Providing expert solutions across various niche sectors, they work seamlessly within a multi-disciplinary team, trusted by our clients to deliver inventive solutions to complex technical design challenges. With extensive experience in delivering solutions focused on the design, installation, operation and maintenance of electrical systems, we're able to understand our client's visions and support them in realising the potential of their products. An in-depth understanding of the industry's regulatory and safety requirements means we can control the process conditions and the risks. From feasibility through to decommissioning, we help clients at every project stage and scale, ensuring functional safety throughout. As the team has grown, we have a number of opportunities for Senior and Principal Electrical Engineers to become permanent members. About You We are looking for people who: Value quality and enjoy delivering technically excellent Electrical designs in the built environment Want to take ownership, be innovative, use initiative and are driven by client satisfaction Have experience in coordinating multi-disciplinary design teams Have experience in leading and mentoring junior engineers Hold a relevant degree and chartered or willing to work towards this Eligible to pass criteria for security clearance and airside pass applications Why this role? With the opportunity to work in multiple sectors including Commercial, Residential and Healthcare. you will work on exciting and innovative buildings, often with top-tier architects and clients. Our growing team provides opportunities for progression, where you will be encouraged and supported to develop your role and challenge your skills to explore career paths that help maximise your technical and management skill sets. You will work within a supportive team with the ability to plug into and access our wider network of professionals You will have the opportunity to see your designs come to fruition through site visits and client engagement Our teams provide the full range of multi-disciplinary services including process engineering, mechanical and electrical (HV/LV), EC&I, architecture, building services, civil and structural, supported by programme management and a CDM consultancy. Our expertise also includes BIM, Digital and Asset Management, embracing the latest in digital techniques to provide clients with the most efficient and cost-effective design and solutions. Benefits You'll have a chance to make your mark on some of the most exciting projects in our sectors. Whatever your discipline, you'll be alongside some of the most talented people in the industry. Friendly and comfortable spaces, easily accessible by car or public transport. And our salary and benefits packages are some of the best in the industry. There's also individual performance-related rewards on offer, as well as: Company car or cash allowance Up to 6% matched contributory pension plan Life assurance scheme 25 days annual leave plus ability to buy additional leave Discount scheme (including gym membership, mobile phones etc) Family friendly policies Employee assistance Professional development If you are looking for a new exciting opportunity with an excellent Building Services Consultancy, please apply with your latest your CV.
14/05/2024
Full time
Lynx are looking for a Senior Electrical Engineer for one of our amazing MEP clients. Providing expert solutions across various niche sectors, they work seamlessly within a multi-disciplinary team, trusted by our clients to deliver inventive solutions to complex technical design challenges. With extensive experience in delivering solutions focused on the design, installation, operation and maintenance of electrical systems, we're able to understand our client's visions and support them in realising the potential of their products. An in-depth understanding of the industry's regulatory and safety requirements means we can control the process conditions and the risks. From feasibility through to decommissioning, we help clients at every project stage and scale, ensuring functional safety throughout. As the team has grown, we have a number of opportunities for Senior and Principal Electrical Engineers to become permanent members. About You We are looking for people who: Value quality and enjoy delivering technically excellent Electrical designs in the built environment Want to take ownership, be innovative, use initiative and are driven by client satisfaction Have experience in coordinating multi-disciplinary design teams Have experience in leading and mentoring junior engineers Hold a relevant degree and chartered or willing to work towards this Eligible to pass criteria for security clearance and airside pass applications Why this role? With the opportunity to work in multiple sectors including Commercial, Residential and Healthcare. you will work on exciting and innovative buildings, often with top-tier architects and clients. Our growing team provides opportunities for progression, where you will be encouraged and supported to develop your role and challenge your skills to explore career paths that help maximise your technical and management skill sets. You will work within a supportive team with the ability to plug into and access our wider network of professionals You will have the opportunity to see your designs come to fruition through site visits and client engagement Our teams provide the full range of multi-disciplinary services including process engineering, mechanical and electrical (HV/LV), EC&I, architecture, building services, civil and structural, supported by programme management and a CDM consultancy. Our expertise also includes BIM, Digital and Asset Management, embracing the latest in digital techniques to provide clients with the most efficient and cost-effective design and solutions. Benefits You'll have a chance to make your mark on some of the most exciting projects in our sectors. Whatever your discipline, you'll be alongside some of the most talented people in the industry. Friendly and comfortable spaces, easily accessible by car or public transport. And our salary and benefits packages are some of the best in the industry. There's also individual performance-related rewards on offer, as well as: Company car or cash allowance Up to 6% matched contributory pension plan Life assurance scheme 25 days annual leave plus ability to buy additional leave Discount scheme (including gym membership, mobile phones etc) Family friendly policies Employee assistance Professional development If you are looking for a new exciting opportunity with an excellent Building Services Consultancy, please apply with your latest your CV.
Position Overview: We are currently seeking a Mid-Level Design Manager for a full-time, permanent position. Based in Hull. A Bit About You: Are you an experienced design professional eager to take on a significant role in a dynamic team? We're looking for a results-driven Mid-Level Design Manager to coordinate design efforts on a high-profile project. This role involves managing various aspects of design, including Civils, Structural, Architectural, Mechanical, Electrical, IT, and Robotics/MHE. Key Responsibilities: Coordinate and manage design activities with consultant designers and subcontractors. Ensure smooth coordination of the entire design process from project inception to client launch. Lead and participate in design meetings, fostering collaboration among diverse stakeholders. Apply expertise in logistics construction and design management using BIM360. Oversee client direct vendors involved in Mechanical, Electrical, IT, and Robotics/MHE. Requirements: Proven experience in design management, ideally in logistics construction. Familiarity with BIM360 is advantageous. Strong leadership and coordination skills with the ability to guide a team to success. Flexibility to work on-site (Hull) and lead design meetings Passion for delivering excellence and driving results. What the Client Offers: Opportunity to contribute to a high-profile project with a significant budget. Collaborative and growth-focused work environment. Competitive compensation.
14/05/2024
Full time
Position Overview: We are currently seeking a Mid-Level Design Manager for a full-time, permanent position. Based in Hull. A Bit About You: Are you an experienced design professional eager to take on a significant role in a dynamic team? We're looking for a results-driven Mid-Level Design Manager to coordinate design efforts on a high-profile project. This role involves managing various aspects of design, including Civils, Structural, Architectural, Mechanical, Electrical, IT, and Robotics/MHE. Key Responsibilities: Coordinate and manage design activities with consultant designers and subcontractors. Ensure smooth coordination of the entire design process from project inception to client launch. Lead and participate in design meetings, fostering collaboration among diverse stakeholders. Apply expertise in logistics construction and design management using BIM360. Oversee client direct vendors involved in Mechanical, Electrical, IT, and Robotics/MHE. Requirements: Proven experience in design management, ideally in logistics construction. Familiarity with BIM360 is advantageous. Strong leadership and coordination skills with the ability to guide a team to success. Flexibility to work on-site (Hull) and lead design meetings Passion for delivering excellence and driving results. What the Client Offers: Opportunity to contribute to a high-profile project with a significant budget. Collaborative and growth-focused work environment. Competitive compensation.
Our customers are at the forefront of everything that we do. It is our aim to raise the consistent standard of quality, efficiency and professionalism within the recycling industry. To deliver this, we focus on developing products and services that save time and money. Our recycling balers, conveyors, fire suppression systems and waste extraction systems are all designed to more than this to meet customers recycling requirements. As a popular choice in the industry we are now recruiting for a Field Service Engineer. In this role you will be responsible for the routine maintenance and repairs of customer equipment. In addition to this you will be expected to maintain business relationships with customers as well as performing necessary administrative tasks and other duties within the scope of your job role. Responsible to: Head Engineer Main Duties and Responsibilities Servicing & Maintenance: Basic troubleshooting, diagnostics and fault finding Service, maintain, refurbish and repair of customer s equipment Commissioning and Installation of customer equipment Use of hand/power tools ratchets, spanner, hammers, etc. Maintenance and repair of company equipment and tools Manufacture, assembly and refurbishment of machinery/parts in the workshop or at customers premises Responding to call outs/breakdowns in a prompt manner at short notice Adhering to Health & Safety at all times Customer Service: Always provide a professional and courteous service to all customers and suppliers Build and maintain excellent relationships with new and existing customers, identifying their requirements where possible Reporting to customer any defects or issues with equipment that could cause harm to their staff or members of the public Provide help and advice to customers regarding the maintenance and repair of equipment Removal of all scrap/waste from customers site and ensuring area is safe and clean before leaving Company Vehicle: Check fluid levels of company service vehicles on a weekly basis and replenish as necessary Maintain cleanliness of the interior/exterior of company service vehicle Stock-take of service vehicles when requested Reporting any issues or damage with company vehicle to your line manager Administrative Tasks: Completion of service reports immediately after every job and ensure documentation is forwarded on to the relevant personnel Completion of timesheets, expense forms and request forms as required Mentoring: Assist and mentor new engineers/apprentices and give honest feedback on their performance to your line manager when requested Person Specification: Previous experience working in mechanical or electrical engineering Ideally experienced as a field service engineer Excellent customer service with strong communication skills Ability to work on own initiative Comfortable mentoring an apprentice/junior engineer Comfortable with travelling and overnight stays (where required) Qualifications & Certification Diploma, City & Guilds or similar qualification in Mechanical/Electrical engineering or similar discipline Full Clean Driving License In the absence of formal qualifications, relevant previous experience will be considered Benefits: Accommodation paid (for overnight stays) with meals provided Fuel Card and Hotel Card Use of company vehicle (work use only) Company pension contributions Extra holiday entitlement following 2 years of service Work uniform Schedule : Day shift Monday to Friday Weekend available with on call rota Job Types : Full-time, Permanent Additional Information: Hours: Monday to Friday (Full time) + Overtime Location: Bridgwater Remuneration: £35,000 to £40,000 (Basic on 48 hours Monday to Friday) Probation period: 6 months Overtime rate paid on additional hours & Saturday, Sunday and Bank Holidays Candidates can easily achieve £40,000 + per annum with overtime/callouts
10/05/2024
Full time
Our customers are at the forefront of everything that we do. It is our aim to raise the consistent standard of quality, efficiency and professionalism within the recycling industry. To deliver this, we focus on developing products and services that save time and money. Our recycling balers, conveyors, fire suppression systems and waste extraction systems are all designed to more than this to meet customers recycling requirements. As a popular choice in the industry we are now recruiting for a Field Service Engineer. In this role you will be responsible for the routine maintenance and repairs of customer equipment. In addition to this you will be expected to maintain business relationships with customers as well as performing necessary administrative tasks and other duties within the scope of your job role. Responsible to: Head Engineer Main Duties and Responsibilities Servicing & Maintenance: Basic troubleshooting, diagnostics and fault finding Service, maintain, refurbish and repair of customer s equipment Commissioning and Installation of customer equipment Use of hand/power tools ratchets, spanner, hammers, etc. Maintenance and repair of company equipment and tools Manufacture, assembly and refurbishment of machinery/parts in the workshop or at customers premises Responding to call outs/breakdowns in a prompt manner at short notice Adhering to Health & Safety at all times Customer Service: Always provide a professional and courteous service to all customers and suppliers Build and maintain excellent relationships with new and existing customers, identifying their requirements where possible Reporting to customer any defects or issues with equipment that could cause harm to their staff or members of the public Provide help and advice to customers regarding the maintenance and repair of equipment Removal of all scrap/waste from customers site and ensuring area is safe and clean before leaving Company Vehicle: Check fluid levels of company service vehicles on a weekly basis and replenish as necessary Maintain cleanliness of the interior/exterior of company service vehicle Stock-take of service vehicles when requested Reporting any issues or damage with company vehicle to your line manager Administrative Tasks: Completion of service reports immediately after every job and ensure documentation is forwarded on to the relevant personnel Completion of timesheets, expense forms and request forms as required Mentoring: Assist and mentor new engineers/apprentices and give honest feedback on their performance to your line manager when requested Person Specification: Previous experience working in mechanical or electrical engineering Ideally experienced as a field service engineer Excellent customer service with strong communication skills Ability to work on own initiative Comfortable mentoring an apprentice/junior engineer Comfortable with travelling and overnight stays (where required) Qualifications & Certification Diploma, City & Guilds or similar qualification in Mechanical/Electrical engineering or similar discipline Full Clean Driving License In the absence of formal qualifications, relevant previous experience will be considered Benefits: Accommodation paid (for overnight stays) with meals provided Fuel Card and Hotel Card Use of company vehicle (work use only) Company pension contributions Extra holiday entitlement following 2 years of service Work uniform Schedule : Day shift Monday to Friday Weekend available with on call rota Job Types : Full-time, Permanent Additional Information: Hours: Monday to Friday (Full time) + Overtime Location: Bridgwater Remuneration: £35,000 to £40,000 (Basic on 48 hours Monday to Friday) Probation period: 6 months Overtime rate paid on additional hours & Saturday, Sunday and Bank Holidays Candidates can easily achieve £40,000 + per annum with overtime/callouts
Request Technology - Craig Johnson
Chicago, Illinois
*We are unable to sponsor for this permanent Full time role* *Position is bonus eligible* Prestigious Global Firm is currently seeking a Senior .NET Product Engineer with Azure experience. Candidate will be responsible for delivering custom business solutions using the Microsoft technology stack. The individual will lead and coordinate projects from a technology perspective, following secure SDLC activities and standards that are consistent with best practices. The individual will drive the design and development of user interfaces, business objectives and overall infrastructure. Responsibilities: Analyze, design, configure, develop and implement intermediate-level solutions to meet business needs and objectives. Work, as directed, with business owners, other IT teams, and vendors to create integrations both to/from vendors. Provide Level 3 support. Investigates operational or systematic problems and provides resolution using intermediate analytical skills and tools as necessary. Prepare project proposals and develop project plans. May lead small projects. Maintain up-to-date awareness of current and future directions of business industry and associated technologies. Investigate and document present procedures as liaison with user departments. May develop and maintain application security, design and documentation according to legal compliance requirements. Effectively listens to understand and articulates technical and non-technical information (both written and oral formats) to customers, peers and/or management in a one-on-one or team context with some oversight. Provides production support activities, including advanced technical writing. Documents small to medium scale projects with some supervision, and may be involved in developing and delivering presentations to aid in custom product development decision making. Manages organizational development by dissecting complex situations and refocusing on the most critical technology tasks. Contributes through technical expertise/professional experience in solving problems and/or delivering on opportunities facing the team or group. Provides feedback to management on strategic recommendations. Fosters environment of innovation and change. Aligns changes with the organization's strategic direction and objectives and customer expectations. Recognizes the scope of problems and understands the impact of changes on others. Identifies short and long-range organizational needs. Creates a clear focus on internal and external customer needs. Qualifications: Bachelor's Degree is preferred in mechanical, computer, or electrical engineering discipline. 8 plus years of software development experience with 6 plus years of web-based software development in .NET technologies (C#, .NET Framework, .NET Core, Docker, MVC, SQL Server). Prior experience developing MSOffice add-Ins in Word, Outlook and Excel Prior experience with ASP.NET MVC (versions 4 and up), .NET Core, WCF, Restful services, JavaScript, jQuery, HTML5/CSS3, React, responsive design, and Dependency Injection frameworks are desired. Experience with ORM with different tools such as Entity Framework and LINQ. Experience working with container-based solutions Experience with continuous integration with Azure DevOps, Git (or similar). Should have strong understanding of SOA, TDD, SOLID principles, and systems architecture concepts. Must be familiar with agile or other iterative development methodologies. Must possess requirement and component level estimation, database design and development skills. Experience in a law firm or global professional services environment preferred. Knowledge of Microsoft Azure technologies. Working with low code platforms like IntApp platform is a plus. Must understand Microsoft Windows Operating system architecture Must understand Microsoft Windows Office System Ability to participate in all aspects of application SDLC including Agile methodologies Must have experience the Microsoft Visual Studio and ADO Must participate in daily team scrums and code reviews Must understand Microsoft SQL Server Technologies: Microsoft Visual Studio 2019/2021 Azure DevOps .NET Framework, .NET Core, Rest API services, WCF Services C#, VB.NET, JQuery, JavaScript, Typescript, React, LINQ, HTML5, CSS3, Bootstrap SQL Server, PostgreSQL Docker MVC Framework Entity Framework Knowledge of SOA (Service Oriented Architecture) and N-Tier Architecture. Advanced Awareness of the Software Development Life Cycle and development methodology (ie Scrum Agile)
30/04/2024
Full time
*We are unable to sponsor for this permanent Full time role* *Position is bonus eligible* Prestigious Global Firm is currently seeking a Senior .NET Product Engineer with Azure experience. Candidate will be responsible for delivering custom business solutions using the Microsoft technology stack. The individual will lead and coordinate projects from a technology perspective, following secure SDLC activities and standards that are consistent with best practices. The individual will drive the design and development of user interfaces, business objectives and overall infrastructure. Responsibilities: Analyze, design, configure, develop and implement intermediate-level solutions to meet business needs and objectives. Work, as directed, with business owners, other IT teams, and vendors to create integrations both to/from vendors. Provide Level 3 support. Investigates operational or systematic problems and provides resolution using intermediate analytical skills and tools as necessary. Prepare project proposals and develop project plans. May lead small projects. Maintain up-to-date awareness of current and future directions of business industry and associated technologies. Investigate and document present procedures as liaison with user departments. May develop and maintain application security, design and documentation according to legal compliance requirements. Effectively listens to understand and articulates technical and non-technical information (both written and oral formats) to customers, peers and/or management in a one-on-one or team context with some oversight. Provides production support activities, including advanced technical writing. Documents small to medium scale projects with some supervision, and may be involved in developing and delivering presentations to aid in custom product development decision making. Manages organizational development by dissecting complex situations and refocusing on the most critical technology tasks. Contributes through technical expertise/professional experience in solving problems and/or delivering on opportunities facing the team or group. Provides feedback to management on strategic recommendations. Fosters environment of innovation and change. Aligns changes with the organization's strategic direction and objectives and customer expectations. Recognizes the scope of problems and understands the impact of changes on others. Identifies short and long-range organizational needs. Creates a clear focus on internal and external customer needs. Qualifications: Bachelor's Degree is preferred in mechanical, computer, or electrical engineering discipline. 8 plus years of software development experience with 6 plus years of web-based software development in .NET technologies (C#, .NET Framework, .NET Core, Docker, MVC, SQL Server). Prior experience developing MSOffice add-Ins in Word, Outlook and Excel Prior experience with ASP.NET MVC (versions 4 and up), .NET Core, WCF, Restful services, JavaScript, jQuery, HTML5/CSS3, React, responsive design, and Dependency Injection frameworks are desired. Experience with ORM with different tools such as Entity Framework and LINQ. Experience working with container-based solutions Experience with continuous integration with Azure DevOps, Git (or similar). Should have strong understanding of SOA, TDD, SOLID principles, and systems architecture concepts. Must be familiar with agile or other iterative development methodologies. Must possess requirement and component level estimation, database design and development skills. Experience in a law firm or global professional services environment preferred. Knowledge of Microsoft Azure technologies. Working with low code platforms like IntApp platform is a plus. Must understand Microsoft Windows Operating system architecture Must understand Microsoft Windows Office System Ability to participate in all aspects of application SDLC including Agile methodologies Must have experience the Microsoft Visual Studio and ADO Must participate in daily team scrums and code reviews Must understand Microsoft SQL Server Technologies: Microsoft Visual Studio 2019/2021 Azure DevOps .NET Framework, .NET Core, Rest API services, WCF Services C#, VB.NET, JQuery, JavaScript, Typescript, React, LINQ, HTML5, CSS3, Bootstrap SQL Server, PostgreSQL Docker MVC Framework Entity Framework Knowledge of SOA (Service Oriented Architecture) and N-Tier Architecture. Advanced Awareness of the Software Development Life Cycle and development methodology (ie Scrum Agile)