Request Technology - Craig Johnson
Chicago, Illinois
*There is no sponsorship for this 6 month contract role* Prestigious Financial Institution is currently seeking a Sr. Performance Testing Engineer with SDET experience. Candidate will be on a team that is responsible for the operationalization of new projects as it pertains to performance testing and other processes that will be necessary to maintain the new system when it goes live. Duties will include but not limited to parallel testing, creating test automation processes that will simplify the parallel testing process. UAT Testing and documenting test results. Responsibilities: Requirements analysis and requirements gathering as it relates to test planning End to End Test planning and execution Assist with the standing up of on-prem and AWS test platforms Assist with the creation of best practices deployment processes Assist with the development of automated testing processes that will simplify our parallel testing process (Encore Versus RTC) Work with our business partners on in the development of test plans and test cases Prepare documentation needed for any automated process and other testing procedures created (test plans, architecture/design) Participates in test results reviews, proactively identifying and mitigating potential issues and defects as well as assisting with continuous improvement Drives continuous improvement efforts by identifying and championing practical means of reducing time to market while maintaining high quality Must be a willing self-starter, independent and comfortable with a fast paced, dynamic environment A team player who assists the team as required to achieve collective goals & delivery milestones including knowledge-share Embraces and advocates for Agile best practices for software development discipline (be true to Agile Manifesto) Actively participates in creation and review of both business and technical user stories, providing constructive feedback and input on both work effort estimation as well as architecture/design improvements Participating in innovative design and proof of concepts with emerging technologies and solutions Embrace industry best practices like continuous integration, continuous deployment, automated testing, TDD etc. Follows agreed upon SDLC procedures to ensure that all information system products and services meet both explicit and implicit quality standards, end-user functional requirements, architectural standards, performance requirements, audit requirements, security rules are upheld, and external facing reporting is properly represented. Performs application and project risk analysis and recommends quality improvements. Assists Production Support by providing advice on system functionality and fixes as required Assist with departmental and new employee training Qualifications: Requires an in-depth knowledge of a development life cycle. Must be competent at the highest technical level in all phases of application development and implementation and testing Requires good communication, analytical, sound judgment and management skills Ability to work effectively with clients, management, and staff. 7+ years experience with SQL to maintain, create and retrieve information from structured or unstructured data stores. Ability to quickly resolve complex data issues in accessing, updating, manipulating, inserting, and modifying data efficiently. Functional and technical specifications creation knowledge Leadership capabilities Knowledge of QA best practices (system, regression, unit, performance) Good organization skills and documentation creation Intellectually curious and eager to learn BS degree in Computer Science, similar technical field required. Masters degree preferred.
06/05/2024
Project-based
*There is no sponsorship for this 6 month contract role* Prestigious Financial Institution is currently seeking a Sr. Performance Testing Engineer with SDET experience. Candidate will be on a team that is responsible for the operationalization of new projects as it pertains to performance testing and other processes that will be necessary to maintain the new system when it goes live. Duties will include but not limited to parallel testing, creating test automation processes that will simplify the parallel testing process. UAT Testing and documenting test results. Responsibilities: Requirements analysis and requirements gathering as it relates to test planning End to End Test planning and execution Assist with the standing up of on-prem and AWS test platforms Assist with the creation of best practices deployment processes Assist with the development of automated testing processes that will simplify our parallel testing process (Encore Versus RTC) Work with our business partners on in the development of test plans and test cases Prepare documentation needed for any automated process and other testing procedures created (test plans, architecture/design) Participates in test results reviews, proactively identifying and mitigating potential issues and defects as well as assisting with continuous improvement Drives continuous improvement efforts by identifying and championing practical means of reducing time to market while maintaining high quality Must be a willing self-starter, independent and comfortable with a fast paced, dynamic environment A team player who assists the team as required to achieve collective goals & delivery milestones including knowledge-share Embraces and advocates for Agile best practices for software development discipline (be true to Agile Manifesto) Actively participates in creation and review of both business and technical user stories, providing constructive feedback and input on both work effort estimation as well as architecture/design improvements Participating in innovative design and proof of concepts with emerging technologies and solutions Embrace industry best practices like continuous integration, continuous deployment, automated testing, TDD etc. Follows agreed upon SDLC procedures to ensure that all information system products and services meet both explicit and implicit quality standards, end-user functional requirements, architectural standards, performance requirements, audit requirements, security rules are upheld, and external facing reporting is properly represented. Performs application and project risk analysis and recommends quality improvements. Assists Production Support by providing advice on system functionality and fixes as required Assist with departmental and new employee training Qualifications: Requires an in-depth knowledge of a development life cycle. Must be competent at the highest technical level in all phases of application development and implementation and testing Requires good communication, analytical, sound judgment and management skills Ability to work effectively with clients, management, and staff. 7+ years experience with SQL to maintain, create and retrieve information from structured or unstructured data stores. Ability to quickly resolve complex data issues in accessing, updating, manipulating, inserting, and modifying data efficiently. Functional and technical specifications creation knowledge Leadership capabilities Knowledge of QA best practices (system, regression, unit, performance) Good organization skills and documentation creation Intellectually curious and eager to learn BS degree in Computer Science, similar technical field required. Masters degree preferred.
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
06/05/2024
Project-based
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
Sales Development Rep Required: Complex software solution selling/technical background We are seeking a motivated and technically skilled Sales Development Representative (SDR) to join our clients sales team in London. The company has a smart software solution that integrates with factory production lines to gauge effectivity. The ideal candidate will possess a strong technical or engineering background with an eagerness to transition into a sales role or an experienced SDR with a history of selling complex software solutions. This role involves understanding and effectively communicating the technical aspects of a Business Performance Management tool to potential clients. Key Responsibilities: Engage with potential clients to introduce them to the Business Performance Management Software, explaining its features and benefits. Respond to initial technical inquiries from prospects, demonstrating a deep understanding of our product and its application in manufacturing environments. Qualify leads through targeted questioning, identifying key decision-makers and their needs. Schedule demonstrations between potential clients and our technical sales team. Maintain an up-to-date knowledge of industry trends and competitor activities. Collaborate with sales and marketing teams to develop new strategies for engaging prospects. Document and track interactions and sales process steps within our CRM system. Required Qualifications: Bachelor's degree in Engineering, Computer Science, Information Technology, or a related technical field. Proven experience in a technical role or in selling complex software solutions, preferably within the manufacturing sector. Strong interpersonal and communication skills, with the ability to explain complex technical concepts to non-technical audiences. Ability to work effectively in a fast-paced, dynamic environment. Highly organized with a strong attention to detail and a proactive approach to problem-solving. Preferred Qualifications: Previous experience as an SDR in a tech company. Knowledge of CRM systems and sales automation tools. Understanding of manufacturing processes and performance management tools. Benefits: Competitive salary of up to £38,000 and performance incentives. Opportunities for professional development and career progression. Dynamic and supportive work environment. How to Apply: If you are passionate about technology and sales and meet the above criteria, we would love to hear from you.
03/05/2024
Full time
Sales Development Rep Required: Complex software solution selling/technical background We are seeking a motivated and technically skilled Sales Development Representative (SDR) to join our clients sales team in London. The company has a smart software solution that integrates with factory production lines to gauge effectivity. The ideal candidate will possess a strong technical or engineering background with an eagerness to transition into a sales role or an experienced SDR with a history of selling complex software solutions. This role involves understanding and effectively communicating the technical aspects of a Business Performance Management tool to potential clients. Key Responsibilities: Engage with potential clients to introduce them to the Business Performance Management Software, explaining its features and benefits. Respond to initial technical inquiries from prospects, demonstrating a deep understanding of our product and its application in manufacturing environments. Qualify leads through targeted questioning, identifying key decision-makers and their needs. Schedule demonstrations between potential clients and our technical sales team. Maintain an up-to-date knowledge of industry trends and competitor activities. Collaborate with sales and marketing teams to develop new strategies for engaging prospects. Document and track interactions and sales process steps within our CRM system. Required Qualifications: Bachelor's degree in Engineering, Computer Science, Information Technology, or a related technical field. Proven experience in a technical role or in selling complex software solutions, preferably within the manufacturing sector. Strong interpersonal and communication skills, with the ability to explain complex technical concepts to non-technical audiences. Ability to work effectively in a fast-paced, dynamic environment. Highly organized with a strong attention to detail and a proactive approach to problem-solving. Preferred Qualifications: Previous experience as an SDR in a tech company. Knowledge of CRM systems and sales automation tools. Understanding of manufacturing processes and performance management tools. Benefits: Competitive salary of up to £38,000 and performance incentives. Opportunities for professional development and career progression. Dynamic and supportive work environment. How to Apply: If you are passionate about technology and sales and meet the above criteria, we would love to hear from you.
Position Available : Validation Engineer Location : Greater Manchester (Hybrid) & Dynamic Working Hours Salary : Up to £50,000 + Company Bonus & Very Good Pension Package Experience needed : Experience of working in manufacturing engineering or process engineering within a complex engineering or manufacturing environment such as defence, aerospace, automotive, robotics and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have a vacancy available as a Supply Chain Validation Engineer to join our team who are responsible for validating the external supply chain to ensure successful delivery of parts required to support development programmes in preparation for full rate production. The role will include the following: Handling a portfolio of suppliers on a day-to-day basis and handle the project Industrial Validation Plan Assess & validate the supply chain and suppliers' capability to meet our requirements Undertake Industrial Validation activities such as: Process FMEAs, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews in preparation for series production. Identify potential manufacturing & supply chain risks and put in place associated improvement and mitigation plans Handle & validate elements of manufacturing capability transfer from in house to supplier Collaborating and supporting a multi-functional team What we need from you: Skilled in manufacturing engineering with a solid understanding of manufacturing processes and techniques An appreciation for project delivery and project management Proficient in Industrial Validation tools such as: Process FMEAs, Measurement System Analysis, Process Mapping, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews Excellent problem-solving skills to develop and implement root cause analysis and improvement plans within Supply Chain for manufacturing system deviations Capable of supporting suppliers/customers to ensure that they develop robust manufacturing systems and control plans Ideally, the applicant will have New Product Introduction (NPI) and/or manufacturing capability transfer experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
03/05/2024
Full time
Position Available : Validation Engineer Location : Greater Manchester (Hybrid) & Dynamic Working Hours Salary : Up to £50,000 + Company Bonus & Very Good Pension Package Experience needed : Experience of working in manufacturing engineering or process engineering within a complex engineering or manufacturing environment such as defence, aerospace, automotive, robotics and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have a vacancy available as a Supply Chain Validation Engineer to join our team who are responsible for validating the external supply chain to ensure successful delivery of parts required to support development programmes in preparation for full rate production. The role will include the following: Handling a portfolio of suppliers on a day-to-day basis and handle the project Industrial Validation Plan Assess & validate the supply chain and suppliers' capability to meet our requirements Undertake Industrial Validation activities such as: Process FMEAs, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews in preparation for series production. Identify potential manufacturing & supply chain risks and put in place associated improvement and mitigation plans Handle & validate elements of manufacturing capability transfer from in house to supplier Collaborating and supporting a multi-functional team What we need from you: Skilled in manufacturing engineering with a solid understanding of manufacturing processes and techniques An appreciation for project delivery and project management Proficient in Industrial Validation tools such as: Process FMEAs, Measurement System Analysis, Process Mapping, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews Excellent problem-solving skills to develop and implement root cause analysis and improvement plans within Supply Chain for manufacturing system deviations Capable of supporting suppliers/customers to ensure that they develop robust manufacturing systems and control plans Ideally, the applicant will have New Product Introduction (NPI) and/or manufacturing capability transfer experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Validation Engineer Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £50,000 + Company Bonus & Very Good Pension Package Experience needed : Experience of working in manufacturing engineering or process engineering within a complex engineering or manufacturing environment such as defence, aerospace, automotive, robotics and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have a vacancy available as a Supply Chain Validation Engineer to join our team who are responsible for validating the external supply chain to ensure successful delivery of parts required to support development programmes in preparation for full rate production. The role will include the following: Handling a portfolio of suppliers on a day-to-day basis and handle the project Industrial Validation Plan Assess & validate the supply chain and suppliers' capability to meet our requirements Undertake Industrial Validation activities such as: Process FMEAs, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews in preparation for series production. Identify potential manufacturing & supply chain risks and put in place associated improvement and mitigation plans Handle & validate elements of manufacturing capability transfer from in house to supplier Collaborating and supporting a multi-functional team What we need from you: Skilled in manufacturing engineering with a solid understanding of manufacturing processes and techniques An appreciation for project delivery and project management Proficient in Industrial Validation tools such as: Process FMEAs, Measurement System Analysis, Process Mapping, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews Excellent problem-solving skills to develop and implement root cause analysis and improvement plans within Supply Chain for manufacturing system deviations Capable of supporting suppliers/customers to ensure that they develop robust manufacturing systems and control plans Ideally, the applicant will have New Product Introduction (NPI) and/or manufacturing capability transfer experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
03/05/2024
Full time
Position Available : Validation Engineer Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £50,000 + Company Bonus & Very Good Pension Package Experience needed : Experience of working in manufacturing engineering or process engineering within a complex engineering or manufacturing environment such as defence, aerospace, automotive, robotics and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have a vacancy available as a Supply Chain Validation Engineer to join our team who are responsible for validating the external supply chain to ensure successful delivery of parts required to support development programmes in preparation for full rate production. The role will include the following: Handling a portfolio of suppliers on a day-to-day basis and handle the project Industrial Validation Plan Assess & validate the supply chain and suppliers' capability to meet our requirements Undertake Industrial Validation activities such as: Process FMEAs, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews in preparation for series production. Identify potential manufacturing & supply chain risks and put in place associated improvement and mitigation plans Handle & validate elements of manufacturing capability transfer from in house to supplier Collaborating and supporting a multi-functional team What we need from you: Skilled in manufacturing engineering with a solid understanding of manufacturing processes and techniques An appreciation for project delivery and project management Proficient in Industrial Validation tools such as: Process FMEAs, Measurement System Analysis, Process Mapping, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews Excellent problem-solving skills to develop and implement root cause analysis and improvement plans within Supply Chain for manufacturing system deviations Capable of supporting suppliers/customers to ensure that they develop robust manufacturing systems and control plans Ideally, the applicant will have New Product Introduction (NPI) and/or manufacturing capability transfer experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Manufacturing Engineer Location : Henlow - Dynamic Working Hours Salary : Up to £42,000 + Paid Overtime, Company Bonus & Very Good Pension Package About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Manufacturing Engineer to work in our team. In this role you will support the team in: Support existing manufacturing lines and new product introduction Support the industrial validation process through the use of FMEA's, process proving activities etc. Liaising with COSHH assessors, SHE and Human Factors Ensuring compliance across all manufacturing procedures Ensuring updates of Manufacturing Instructions and maintenance of production BOMs and on time and in line with master production schedule (MPS). What we need from you: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 is a mandatory requirement Formal further education certificate to HNC or equivalent in a relevant subject OR BEng in relevant Engineering Degree Eagerness to contribute to an environment of process improvement The ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions Confidence in managing teams and leading discussions with teams and individuals If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
03/05/2024
Full time
Position Available : Manufacturing Engineer Location : Henlow - Dynamic Working Hours Salary : Up to £42,000 + Paid Overtime, Company Bonus & Very Good Pension Package About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Manufacturing Engineer to work in our team. In this role you will support the team in: Support existing manufacturing lines and new product introduction Support the industrial validation process through the use of FMEA's, process proving activities etc. Liaising with COSHH assessors, SHE and Human Factors Ensuring compliance across all manufacturing procedures Ensuring updates of Manufacturing Instructions and maintenance of production BOMs and on time and in line with master production schedule (MPS). What we need from you: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 is a mandatory requirement Formal further education certificate to HNC or equivalent in a relevant subject OR BEng in relevant Engineering Degree Eagerness to contribute to an environment of process improvement The ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions Confidence in managing teams and leading discussions with teams and individuals If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Manufacturing Engineer Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £50,000 + Company Bonus & Very Good Pension Package Experience needed : We are looking for a manufacturing engineer or process engineer with experience of validating the quality of parts/products, who is able to transfer their skill set into validating our supply chain. The candidate would need to have experience of working within a complex engineering or manufacturing environment such as defence, aerospace, automotive, robotics and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have a vacancy available as a Supply Chain Validation Engineer to join our team who are responsible for validating the external supply chain to ensure successful delivery of parts required to support development programmes in preparation for full rate production. The role will include the following: Handling a portfolio of suppliers on a day-to-day basis and handle the project Industrial Validation Plan Assess & validate the supply chain and suppliers' capability to meet our requirements Undertake Industrial Validation activities such as: Process FMEAs, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews in preparation for series production. Identify potential manufacturing & supply chain risks and put in place associated improvement and mitigation plans Handle & validate elements of manufacturing capability transfer from in house to supplier Collaborating and supporting a multi-functional team What we need from you: Skilled in manufacturing engineering with a solid understanding of manufacturing processes and techniques An appreciation for project delivery and project management Proficient in Industrial Validation tools such as: Process FMEAs, Measurement System Analysis, Process Mapping, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews Excellent problem-solving skills to develop and implement root cause analysis and improvement plans within Supply Chain for manufacturing system deviations Capable of supporting suppliers/customers to ensure that they develop robust manufacturing systems and control plans Ideally, the applicant will have New Product Introduction (NPI) and/or manufacturing capability transfer experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
03/05/2024
Full time
Position Available : Manufacturing Engineer Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £50,000 + Company Bonus & Very Good Pension Package Experience needed : We are looking for a manufacturing engineer or process engineer with experience of validating the quality of parts/products, who is able to transfer their skill set into validating our supply chain. The candidate would need to have experience of working within a complex engineering or manufacturing environment such as defence, aerospace, automotive, robotics and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have a vacancy available as a Supply Chain Validation Engineer to join our team who are responsible for validating the external supply chain to ensure successful delivery of parts required to support development programmes in preparation for full rate production. The role will include the following: Handling a portfolio of suppliers on a day-to-day basis and handle the project Industrial Validation Plan Assess & validate the supply chain and suppliers' capability to meet our requirements Undertake Industrial Validation activities such as: Process FMEAs, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews in preparation for series production. Identify potential manufacturing & supply chain risks and put in place associated improvement and mitigation plans Handle & validate elements of manufacturing capability transfer from in house to supplier Collaborating and supporting a multi-functional team What we need from you: Skilled in manufacturing engineering with a solid understanding of manufacturing processes and techniques An appreciation for project delivery and project management Proficient in Industrial Validation tools such as: Process FMEAs, Measurement System Analysis, Process Mapping, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews Excellent problem-solving skills to develop and implement root cause analysis and improvement plans within Supply Chain for manufacturing system deviations Capable of supporting suppliers/customers to ensure that they develop robust manufacturing systems and control plans Ideally, the applicant will have New Product Introduction (NPI) and/or manufacturing capability transfer experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Manufacturing Engineer Location : Bolton (1-2 days in office a week) Salary : Up to £52,000 + Company Bonus & Very Good Pension Package Experience needed : We are looking for a manufacturing engineer or process engineer with experience of validating the quality of parts/products, who is able to transfer their skill set into validating our supply chain. The candidate would need to have experience of working within a complex engineering or manufacturing environment such as defence, aerospace, automotive, robotics and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have a vacancy available as a Supply Chain Validation Engineer to join our team who are responsible for validating the external supply chain to ensure successful delivery of parts required to support development programmes in preparation for full rate production. The role will include the following: Handling a portfolio of suppliers on a day-to-day basis and handle the project Industrial Validation Plan Assess & validate the supply chain and suppliers' capability to meet our requirements Undertake Industrial Validation activities such as: Process FMEAs, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews in preparation for series production. Identify potential manufacturing & supply chain risks and put in place associated improvement and mitigation plans Handle & validate elements of manufacturing capability transfer from in house to supplier Collaborating and supporting a multi-functional team What we need from you: Skilled in manufacturing engineering with a solid understanding of manufacturing processes and techniques An appreciation for project delivery and project management Proficient in Industrial Validation tools such as: Process FMEAs, Measurement System Analysis, Process Mapping, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews Excellent problem-solving skills to develop and implement root cause analysis and improvement plans within Supply Chain for manufacturing system deviations Capable of supporting suppliers/customers to ensure that they develop robust manufacturing systems and control plans Ideally, the applicant will have New Product Introduction (NPI) and/or manufacturing capability transfer experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
03/05/2024
Full time
Position Available : Manufacturing Engineer Location : Bolton (1-2 days in office a week) Salary : Up to £52,000 + Company Bonus & Very Good Pension Package Experience needed : We are looking for a manufacturing engineer or process engineer with experience of validating the quality of parts/products, who is able to transfer their skill set into validating our supply chain. The candidate would need to have experience of working within a complex engineering or manufacturing environment such as defence, aerospace, automotive, robotics and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have a vacancy available as a Supply Chain Validation Engineer to join our team who are responsible for validating the external supply chain to ensure successful delivery of parts required to support development programmes in preparation for full rate production. The role will include the following: Handling a portfolio of suppliers on a day-to-day basis and handle the project Industrial Validation Plan Assess & validate the supply chain and suppliers' capability to meet our requirements Undertake Industrial Validation activities such as: Process FMEAs, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews in preparation for series production. Identify potential manufacturing & supply chain risks and put in place associated improvement and mitigation plans Handle & validate elements of manufacturing capability transfer from in house to supplier Collaborating and supporting a multi-functional team What we need from you: Skilled in manufacturing engineering with a solid understanding of manufacturing processes and techniques An appreciation for project delivery and project management Proficient in Industrial Validation tools such as: Process FMEAs, Measurement System Analysis, Process Mapping, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews Excellent problem-solving skills to develop and implement root cause analysis and improvement plans within Supply Chain for manufacturing system deviations Capable of supporting suppliers/customers to ensure that they develop robust manufacturing systems and control plans Ideally, the applicant will have New Product Introduction (NPI) and/or manufacturing capability transfer experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : RF Systems Engineer Location : Bristol - Dynamic Working Hours Salary : Up to £63,000 + Paid Overtime, Company Bonus & Very Good Pension Package Experience needed : Experience in RF, DSP, Antenna & Modelling and experience being involved with the full product life cycle from research and concept development to system design, integration, verification and validation. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Supplier Development Manager to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Designing and developing RF systems Participating in, or leading design reviews across the product life cycle. Coordinating the transition of development hardware into production, including environmental testing, qualification testing and design certification. System level functionality proving, Software/Firmware integration and proving. What we need from you: RF/Microwave systems knowledge Understanding of waveform design and implementation Requirements management and systems design Technical leadership of junior engineers System level RF modelling Antenna design and/or EM modelling Familiarity of Real Time Digital Signal Processing for high data bandwidth systems Systems modelling and Autocode generation experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
03/05/2024
Full time
Position Available : RF Systems Engineer Location : Bristol - Dynamic Working Hours Salary : Up to £63,000 + Paid Overtime, Company Bonus & Very Good Pension Package Experience needed : Experience in RF, DSP, Antenna & Modelling and experience being involved with the full product life cycle from research and concept development to system design, integration, verification and validation. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Supplier Development Manager to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Designing and developing RF systems Participating in, or leading design reviews across the product life cycle. Coordinating the transition of development hardware into production, including environmental testing, qualification testing and design certification. System level functionality proving, Software/Firmware integration and proving. What we need from you: RF/Microwave systems knowledge Understanding of waveform design and implementation Requirements management and systems design Technical leadership of junior engineers System level RF modelling Antenna design and/or EM modelling Familiarity of Real Time Digital Signal Processing for high data bandwidth systems Systems modelling and Autocode generation experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
IT Project Manager Initial freelance contract until end of 2024 + extensions 100% remote possible Our client: Provides High Performance Mixed Signal and Standard Product solutions that leverage its leading RF, Analog, Power Management, Interface, Security and Digital Processing expertise. These innovations are used in a wide range of automotive, identification, wireless infrastructure, lighting, industrial, mobile, consumer and computing applications. A global semiconductor company with operations in more than 45 countries, over 45.000 employees and a revenue of over $10 billion. Department: The department Generic IT Solutions is providing IT infrastructure Services and develops new advanced infrastructure services for our client. Services include IAAS, Connectivity & Telecom, Workplace and support, IAM, and collaboration. The operational services are provided by global external partners. On behalf of our client, the IT Infrastructure Solutions team develops solutions which include architecture, design, roadmap and infrastructure standards. The team is responsible for running IT improvement and innovation projects (eg SDDC, ), as well as globally service delivery management. Project/Job Summary: You will work on the Modern Workplace (Intune) and Linux projects and will be responsible for deploying the product into Production (enrolling new users, migrating existing ones, etc.). The definition of a Modern Workplace is an operational setup which has been professionally designed to meet both the physical and technological needs of both your business and its employees. A Modern Workplace drives company-wide business transformation by utilizing the latest Microsoft technology to power and streamline business operations and empower employees to do their best work around the clock. You will be part of a team managing the project through all phases of the product life cycle from definition to launch and as previously stated your responsibility will be for the deploy/launch phase You will work closely with a worldwide diverse group of engineers, vendors, and subcontractors. You will assist business managers and technical teams in overseeing adherence to established processes, scheduling, risk management, agendas, minutes, action item tracking and project reporting. Responsibilities: . Collaborate with stakeholders to understand their MDM/Linux needs and objectives. . Prepare weekly reports tracking project progress/stakeholder management. . Develop comprehensive project plans, timelines, and budgets. . Conduct risk assessment and develop mitigation strategies. . Serve as the primary point of contact, maintaining communication to provide project updates and concerns. . Manage expectations and ensure alignment between project stakeholders, including internal teams, external vendors and users. . Monitor project progress against established timelines and budgets. . Identify and address issues and risks proactively, implement corrective actions. . Work on the Adoption and Change area in order to prepare and facilitate the rollout. . Rollout/Deploy mobile device management and Linux throughout the estate (7k+ devices) . Ability to work in an agile environment and leading an agile team . Proficient in activity and resource planning - Excellent time management skills - Effective organization and team motivation skills - Experience with Organizational Change mgmt. and Stakeholder mgmt. practices Preferred Skills: . SAFe PO/PM certified . Experience with device management tools is a plus . Experience with project scheduling tools such as MS Project . MBA or business acumen . Experience in ServiceNow ticket platforms . Experience with O365/ProPlus Soft skills: . Excellent communication skills, both written and verbal . Excellent leadership skills . Detailed oriented self-motivated individual who adapts well to change . Candidate must be able to adjust work schedule when required to support morning or evening calls
03/05/2024
Project-based
IT Project Manager Initial freelance contract until end of 2024 + extensions 100% remote possible Our client: Provides High Performance Mixed Signal and Standard Product solutions that leverage its leading RF, Analog, Power Management, Interface, Security and Digital Processing expertise. These innovations are used in a wide range of automotive, identification, wireless infrastructure, lighting, industrial, mobile, consumer and computing applications. A global semiconductor company with operations in more than 45 countries, over 45.000 employees and a revenue of over $10 billion. Department: The department Generic IT Solutions is providing IT infrastructure Services and develops new advanced infrastructure services for our client. Services include IAAS, Connectivity & Telecom, Workplace and support, IAM, and collaboration. The operational services are provided by global external partners. On behalf of our client, the IT Infrastructure Solutions team develops solutions which include architecture, design, roadmap and infrastructure standards. The team is responsible for running IT improvement and innovation projects (eg SDDC, ), as well as globally service delivery management. Project/Job Summary: You will work on the Modern Workplace (Intune) and Linux projects and will be responsible for deploying the product into Production (enrolling new users, migrating existing ones, etc.). The definition of a Modern Workplace is an operational setup which has been professionally designed to meet both the physical and technological needs of both your business and its employees. A Modern Workplace drives company-wide business transformation by utilizing the latest Microsoft technology to power and streamline business operations and empower employees to do their best work around the clock. You will be part of a team managing the project through all phases of the product life cycle from definition to launch and as previously stated your responsibility will be for the deploy/launch phase You will work closely with a worldwide diverse group of engineers, vendors, and subcontractors. You will assist business managers and technical teams in overseeing adherence to established processes, scheduling, risk management, agendas, minutes, action item tracking and project reporting. Responsibilities: . Collaborate with stakeholders to understand their MDM/Linux needs and objectives. . Prepare weekly reports tracking project progress/stakeholder management. . Develop comprehensive project plans, timelines, and budgets. . Conduct risk assessment and develop mitigation strategies. . Serve as the primary point of contact, maintaining communication to provide project updates and concerns. . Manage expectations and ensure alignment between project stakeholders, including internal teams, external vendors and users. . Monitor project progress against established timelines and budgets. . Identify and address issues and risks proactively, implement corrective actions. . Work on the Adoption and Change area in order to prepare and facilitate the rollout. . Rollout/Deploy mobile device management and Linux throughout the estate (7k+ devices) . Ability to work in an agile environment and leading an agile team . Proficient in activity and resource planning - Excellent time management skills - Effective organization and team motivation skills - Experience with Organizational Change mgmt. and Stakeholder mgmt. practices Preferred Skills: . SAFe PO/PM certified . Experience with device management tools is a plus . Experience with project scheduling tools such as MS Project . MBA or business acumen . Experience in ServiceNow ticket platforms . Experience with O365/ProPlus Soft skills: . Excellent communication skills, both written and verbal . Excellent leadership skills . Detailed oriented self-motivated individual who adapts well to change . Candidate must be able to adjust work schedule when required to support morning or evening calls
ARM (Advanced Resource Managers)
Corsham, Wiltshire
Lead Mechanical Engineer (Assembly, Integration & Testing) Corsham 12-month contract Paying up to £45p/h (Umbrella) ARM have partnered with an Aerospace client who are looking for an experienced AIT engineer to work out of their manufacturing site based in Corsham. As the AIT Lead Engineer, you'll be responsible for leading the Mechanical team and ensuring all engineering concepts are delivered to the shop floor. Responsibilities: * Leading a team of AIT engineers on specific projects as well as planning the mechanical team's activities on a weekly basis. * Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A - E' * Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures, and test reports. * Control of all project MGSE, flight & support equipment * Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. * Alignment - producing test procedures and operating and maintaining optical alignment equipment. * Designing test equipment, overseeing its manufacture, and commissioning * Mechanical handling of spacecraft, instruments, payloads, solar arrays, antennas etc * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Install and validate test instrumentation. * Support propulsion testing * Handling and installation of thermal hardware * Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation associated with performing these tasks. * Pyrotechnic handling, installation, and safety * Plan and control the workload of the AIT team consisting of engineers and technicians. * Be able to travel overseas to work for short periods (typically 2-3 months, could be 6-7 months on occasions) * Be able to integrate quickly and easily into an AIT team. Experience required: * Appreciation of satellite integration processes and project phases * Use of SAP or other ERP System * Understanding of build documentation and the need for it * Driving build quality through review of processes and implementation of improvements * Managing a team during day-to-day activities ensuring work is completed on time and the correct standard. * Controlling and delivery of projects to budget and schedule * Face-to-face dealings with customers and suppliers * Worked in volatile, high-pressure environments to resolve technical and personnel conflicts. * Spacecraft Mechanical testing on prime projects is essential. * Leading other team members * Production of MGSE specs and operation of MGSE and flight HW * Production of high-quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
03/05/2024
Project-based
Lead Mechanical Engineer (Assembly, Integration & Testing) Corsham 12-month contract Paying up to £45p/h (Umbrella) ARM have partnered with an Aerospace client who are looking for an experienced AIT engineer to work out of their manufacturing site based in Corsham. As the AIT Lead Engineer, you'll be responsible for leading the Mechanical team and ensuring all engineering concepts are delivered to the shop floor. Responsibilities: * Leading a team of AIT engineers on specific projects as well as planning the mechanical team's activities on a weekly basis. * Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A - E' * Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures, and test reports. * Control of all project MGSE, flight & support equipment * Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. * Alignment - producing test procedures and operating and maintaining optical alignment equipment. * Designing test equipment, overseeing its manufacture, and commissioning * Mechanical handling of spacecraft, instruments, payloads, solar arrays, antennas etc * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Install and validate test instrumentation. * Support propulsion testing * Handling and installation of thermal hardware * Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation associated with performing these tasks. * Pyrotechnic handling, installation, and safety * Plan and control the workload of the AIT team consisting of engineers and technicians. * Be able to travel overseas to work for short periods (typically 2-3 months, could be 6-7 months on occasions) * Be able to integrate quickly and easily into an AIT team. Experience required: * Appreciation of satellite integration processes and project phases * Use of SAP or other ERP System * Understanding of build documentation and the need for it * Driving build quality through review of processes and implementation of improvements * Managing a team during day-to-day activities ensuring work is completed on time and the correct standard. * Controlling and delivery of projects to budget and schedule * Face-to-face dealings with customers and suppliers * Worked in volatile, high-pressure environments to resolve technical and personnel conflicts. * Spacecraft Mechanical testing on prime projects is essential. * Leading other team members * Production of MGSE specs and operation of MGSE and flight HW * Production of high-quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
ARM (Advanced Resource Managers)
Stevenage, Hertfordshire
Mechanical Engineer (Assembly, Integration & Testing) Stevenage 12-month contract Paying up to £35p/h (Umbrella) ARM has partnered with an Aerospace client who is looking for an experienced Mechanical Engineer (AIT) to work out of their manufacturing site based in Stevenage. As the AIT Mechanical Engineer, you'll be responsible for providing support on writing processes, plans, and procedures in 3D Experience for the production of Satellites and payloads. This includes supporting hardware assembly on the Satellites such as black boxes, Solar Array, and structure panels. Supporting Satellite environmental testing at the test facility. Responsibilities: * Support to the customization phase starting at the project kick-off. * Support project DMU (Digital mock-up/design for manufacture) sessions to ensure design for manufacture. * Lead the installation of Satellite appendages and applicable integration flows and preparation. * Oversee unit installation activities on the Satellite. * Support quality reviews, conduct PFMEA and Root Cause Analysis * Support in the creation of re-work instructions based on project requirements and identify parts and tooling required to carry them out. * Design of tooling/build aids for assembly execution * Support to R&D * Training module creation and maintenance. Experience required: * Minimum of HNC level in a Mechanical engineering discipline * Good planning skills and process competence, (MRP system experience an advantage) * Satellite Appendage installation process (Solar Array, reflectors, antennas, deployable systems). * Good understanding and detailed experience of complex mechanical systems. * Lean manufacturing techniques including 5S, root cause analysis, and continuous improvement. * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Handling and installation of thermal hardware (heaters, thermistors) * Mechanical integration of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation/process associated with performing these * Previous experience with payload builds is a distinct advantage. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
03/05/2024
Project-based
Mechanical Engineer (Assembly, Integration & Testing) Stevenage 12-month contract Paying up to £35p/h (Umbrella) ARM has partnered with an Aerospace client who is looking for an experienced Mechanical Engineer (AIT) to work out of their manufacturing site based in Stevenage. As the AIT Mechanical Engineer, you'll be responsible for providing support on writing processes, plans, and procedures in 3D Experience for the production of Satellites and payloads. This includes supporting hardware assembly on the Satellites such as black boxes, Solar Array, and structure panels. Supporting Satellite environmental testing at the test facility. Responsibilities: * Support to the customization phase starting at the project kick-off. * Support project DMU (Digital mock-up/design for manufacture) sessions to ensure design for manufacture. * Lead the installation of Satellite appendages and applicable integration flows and preparation. * Oversee unit installation activities on the Satellite. * Support quality reviews, conduct PFMEA and Root Cause Analysis * Support in the creation of re-work instructions based on project requirements and identify parts and tooling required to carry them out. * Design of tooling/build aids for assembly execution * Support to R&D * Training module creation and maintenance. Experience required: * Minimum of HNC level in a Mechanical engineering discipline * Good planning skills and process competence, (MRP system experience an advantage) * Satellite Appendage installation process (Solar Array, reflectors, antennas, deployable systems). * Good understanding and detailed experience of complex mechanical systems. * Lean manufacturing techniques including 5S, root cause analysis, and continuous improvement. * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Handling and installation of thermal hardware (heaters, thermistors) * Mechanical integration of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation/process associated with performing these * Previous experience with payload builds is a distinct advantage. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Engineering Manager/Platform Lead You will be joining Platforms team within Enterprise Digital and be responsible for one or two squads whose goal is to make life for the development teams in other parts of the business easier by providing a set of low friction, fully managed cloud capabilities and abstracting these complexities away from the developer - allowing them to focus on code and not infrastructure. Your squads will focus on building IAC (Infrastructure as Code) using non-traditional tools such as Pulumi and implementing capabilities that allow developers to develop and deploy to the cloud faster and securely. And as a hands-on Engineering Manager, your code will lead by example and your teams will look up to you for strategic and technical leadership. You will be a confident solutions designer, able to communicate complex ideas clearly at various levels of the organization and skilled in working with multi-skilled teams to come up with workable solutions You will be a great collaborator working with your counterparts and other Engineering Managers within other Platform teams to ensure that our cloud capabilities are first class and provide the best experience to developers each day. You and your teams will also collaborate closely with engineering teams across the tribes -understanding their requirements and building out capabilities to support it. What you will be doing Lead, grow and hire a team of engineers that develop best-in-breed tooling and IAC capabilities that allow developers to go from idea to production in 12 minutes or less Create and Lead strategy for a roadmap that caters to the needs of the business and developers. Remove manual implementation from workflows and look to automate as much as possible. Provide mentorship and career support for the members of your teams - maximising their potential. Agile champion for your teams, taking pride in a metrics-based organisation that looks to continually improve itself. Skills A fast learner - Our work within Platforms is varied and we work across the full developer life cycle. Passion for automation with a reluctance for manual implementation 4+ years of experience in building software products in Typescript. Java is a bonus. 2+ years of experience in a team leadership position where you were responsible for career growth and mentorship of team members. An appreciation for working in the cloud and an understanding of cloud principles. We will provide opportunities for AWS training, but bonus points for already having that experience. 3+ years of experience with agile systems development methodologies 3+ years' experience with cloud computing on AWS. Bonus is experience with DevOps tools, process and culture. Benefits Competitive salary 25 days annual leave (plus bank holidays) 10% on target bonus Life Assurance Pension scheme
03/05/2024
Full time
Engineering Manager/Platform Lead You will be joining Platforms team within Enterprise Digital and be responsible for one or two squads whose goal is to make life for the development teams in other parts of the business easier by providing a set of low friction, fully managed cloud capabilities and abstracting these complexities away from the developer - allowing them to focus on code and not infrastructure. Your squads will focus on building IAC (Infrastructure as Code) using non-traditional tools such as Pulumi and implementing capabilities that allow developers to develop and deploy to the cloud faster and securely. And as a hands-on Engineering Manager, your code will lead by example and your teams will look up to you for strategic and technical leadership. You will be a confident solutions designer, able to communicate complex ideas clearly at various levels of the organization and skilled in working with multi-skilled teams to come up with workable solutions You will be a great collaborator working with your counterparts and other Engineering Managers within other Platform teams to ensure that our cloud capabilities are first class and provide the best experience to developers each day. You and your teams will also collaborate closely with engineering teams across the tribes -understanding their requirements and building out capabilities to support it. What you will be doing Lead, grow and hire a team of engineers that develop best-in-breed tooling and IAC capabilities that allow developers to go from idea to production in 12 minutes or less Create and Lead strategy for a roadmap that caters to the needs of the business and developers. Remove manual implementation from workflows and look to automate as much as possible. Provide mentorship and career support for the members of your teams - maximising their potential. Agile champion for your teams, taking pride in a metrics-based organisation that looks to continually improve itself. Skills A fast learner - Our work within Platforms is varied and we work across the full developer life cycle. Passion for automation with a reluctance for manual implementation 4+ years of experience in building software products in Typescript. Java is a bonus. 2+ years of experience in a team leadership position where you were responsible for career growth and mentorship of team members. An appreciation for working in the cloud and an understanding of cloud principles. We will provide opportunities for AWS training, but bonus points for already having that experience. 3+ years of experience with agile systems development methodologies 3+ years' experience with cloud computing on AWS. Bonus is experience with DevOps tools, process and culture. Benefits Competitive salary 25 days annual leave (plus bank holidays) 10% on target bonus Life Assurance Pension scheme
Senior Hardware Design Engineer - Exciting Opportunity with Leading Tech Company Lynx is working with a renowned tech company to recruit a Senior Hardware Design Engineer. In this role you'll play a pivotal role in new product introduction as well as sustaining engineering for ground-breaking products. This is a hybrid role and also offers a bonus of 3-6%. Key Responsibilities: Design electronic circuits, subsystems, and systems covering analog, digital, and RF Schematic capture, layout, and library management Evaluate new systems and technologies for feasibility and product design Technical support for production, manufacturing, and troubleshooting Design verification, testing, and documentation Requirements: 4+ years of relevant hardware design experience Strong expertise in digital circuit design (microprocessors, FPGAs, high-speed peripherals) Solid skills in analog circuit design (power supplies, etc.) Familiarity with PCB layout, EMC/CE marking, and design for IPC Hands-on experience in PCB testing Desired: Proficiency with industry-standard design tools - Altium preferred Understanding of military/airborne design standards (MIL-STD, DO-160, etc.) Practical testing skills with scopes, analysers, JTAG boundary scan, etc. Hit apply to find out more information.
02/05/2024
Full time
Senior Hardware Design Engineer - Exciting Opportunity with Leading Tech Company Lynx is working with a renowned tech company to recruit a Senior Hardware Design Engineer. In this role you'll play a pivotal role in new product introduction as well as sustaining engineering for ground-breaking products. This is a hybrid role and also offers a bonus of 3-6%. Key Responsibilities: Design electronic circuits, subsystems, and systems covering analog, digital, and RF Schematic capture, layout, and library management Evaluate new systems and technologies for feasibility and product design Technical support for production, manufacturing, and troubleshooting Design verification, testing, and documentation Requirements: 4+ years of relevant hardware design experience Strong expertise in digital circuit design (microprocessors, FPGAs, high-speed peripherals) Solid skills in analog circuit design (power supplies, etc.) Familiarity with PCB layout, EMC/CE marking, and design for IPC Hands-on experience in PCB testing Desired: Proficiency with industry-standard design tools - Altium preferred Understanding of military/airborne design standards (MIL-STD, DO-160, etc.) Practical testing skills with scopes, analysers, JTAG boundary scan, etc. Hit apply to find out more information.
Mechaniker (m/w/d) - GMP/ Prozessanlagen / Validierung /Automation/ Pikett Projekt: Für unseren Kunden, ein grosses Pharmaunternehmen mit Sitz in Kaiseraugst suchen wir 16-18 Elektriker , Automatiker und Mechaniker (m/w/d) Hintergrund : Der moderne Produktionsbetrieb für Parenteralia in Kaiseraugst (PKau) ist verantwortlich für die Herstellung steriler Arzneimittel und beliefert den weltweiten Markt mit biopharmazeutischen Arzneimittelprodukten. An der Gefriertrocknungslinie (GEF) werden vorgefertigte Lösungen aseptisch abgefüllt und anschließend lyophilisiert. Die Linie verfügt über eigene Kapazitäten zum Auftauen/Einfrieren und für die Ansatzherstellung (Compounding).Als Mechaniker (m/w/d) sind Sie Bestandteil des Instandhaltungs-Teams des Wertstrom-Speed und sind dem Technical Unit Lead unterstellt.In Ihrer Rolle arbeiten Sie eng mit den produzierenden Einheiten im Wertstrom und den lokalen Schnittstellen zusammen. Die Bereitschaft zu bereichsübergreifender Arbeit ist selbstverständlich. Sie sind als Teamplayer offen für Neues, bringen eine agile und kreative Denkweise mit, arbeiten lösungsorientiert, haben ein open Mindset" und den End to End" Gedanken. Der oder die perfekte Kandidat:in hat eine abgeschlossene technische Ausbildung als Mechaniker und mindestens 3 Jahre Berufserfahrung vorzugsweise in der pharmazeutischen Produktion sowie verfügt über fliessende Deutschkenntnisse. Aufgaben: * Sie sind für die mechanische Verfügbarkeit der Prozessanlagen, inkl. Produktionsbetreuung, Störungsbehebung, Wartung. Problemlösung zuständig (First Level Support) . Fachgerechte Behebung von auftretenden Störungen an hochautomatisierten Anlagen . Erkennen, analysieren und beheben von Störungen im Ablauf von komplexen Steuerungen . Mithilfe bei der Erhöhung der Anlagenverfügbarkeit . Fachgerechte und selbständige Durchführung von geplanten Instandhaltungstätigkeiten . Fachgerechte und selbstständige Durchführung der Formatwechsel an den Prozessanlagen . Sicheres Arbeiten im GMP-Umfeld, u.a. im Reinraum . GMP-gerechte Dokumentation der durchgeführten Instandhaltungstätigkeiten . Unterstützung bei Validierungs-und Qualifizierungstätigkeiten . Schulen von Mitarbeitern im Umgang mit den Anlagen . Unterstützung der Schnittstellen, insbesondere des Betriebs-und Automation Engineerings . Selbstständiges Erarbeiten und ausführen kleinerer Anlagen Optimierungen unter Einhaltung des Change Management" . Mitarbeit und Umsetzung von kontinuierlichen Verbesserungsmaßnahmen (KVP) . Mitarbeit und Unterstützung bei der Verwaltung von Ersatz- und Verschleißteilen . Bereitschaft zum Schichtbetrieb (2-Schichtbetrieb, 3-Schichtbetrieb (kontinuierlich) und 5-Schichtbetrieb (vollkontinuierlich im 6/4-Modell) . Bereitschaft zum Pikettdienst Must Haves: * Abgeschlossene technische Ausbildung als Mechaniker . Mind. 3 Jahre Berufserfahrung idealerweise in der pharmazeutischen Produktion oder in einem stark regulierten Umfeld . Sichere Anwendung von Standard PC-Programmen ( MS Office und Google) . Kenntnisse im SAP-PM-Modul sind von Vorteil . Sehr gute Sprachkenntnisse in Deutsch in Wort und Schrift . Sie bringen neben dem technischen Verständnis eine eigenständige, kommunikative, belastbare und flexible Persönlichkeit mit, haben Freude an selbständiger Arbeit, übernehmen Verantwortung und arbeiten gerne in einem Team * Sie können vorausschauend Denken und Handeln und haben ausgeprägte Fähigkeiten im konzeptionellen Bereich * Exakte und zuverlässige Arbeitsweise auch unter zeitlicher Belastung Nice to haves: . Eine Weiterbildung zum Meister ist von Vorteil . Englischkenntnisse von Vorteil . LPS (Lean Production System) Kenntnisse von Vorteil Reference No.: 923415TP Rolle: Mechaniker Industry: Pharma Location: Kaiseraugst Workload: 100% Start: 01.07.2024 Duration: 24 Deadline : 20.05.2024 Sollte diese Position Ihr Interesse geweckt haben, senden Sie uns bitte Ihr komplettes Dossier via dem Link in dieser Anzeige zu. Über uns: ITech Consult ist ein nach ISO 9001:2015 zertifiziertes Schweizer Unternehmen mit Niederlassungen in Deutschland und Irland. ITech Consult ist spezialisiert auf die Vermittlung von hochqualifizierten Kandidaten für den Personalverleih in den Bereichen IT, Life Science & Engineering. Wir bieten Personalverleih & Payroll Dienstleistungen an. Für unsere Kandidaten ist dies kostenlos, auch bei Payroll berechnen wir Ihnen keine zusätzlichen Gebühren.
02/05/2024
Project-based
Mechaniker (m/w/d) - GMP/ Prozessanlagen / Validierung /Automation/ Pikett Projekt: Für unseren Kunden, ein grosses Pharmaunternehmen mit Sitz in Kaiseraugst suchen wir 16-18 Elektriker , Automatiker und Mechaniker (m/w/d) Hintergrund : Der moderne Produktionsbetrieb für Parenteralia in Kaiseraugst (PKau) ist verantwortlich für die Herstellung steriler Arzneimittel und beliefert den weltweiten Markt mit biopharmazeutischen Arzneimittelprodukten. An der Gefriertrocknungslinie (GEF) werden vorgefertigte Lösungen aseptisch abgefüllt und anschließend lyophilisiert. Die Linie verfügt über eigene Kapazitäten zum Auftauen/Einfrieren und für die Ansatzherstellung (Compounding).Als Mechaniker (m/w/d) sind Sie Bestandteil des Instandhaltungs-Teams des Wertstrom-Speed und sind dem Technical Unit Lead unterstellt.In Ihrer Rolle arbeiten Sie eng mit den produzierenden Einheiten im Wertstrom und den lokalen Schnittstellen zusammen. Die Bereitschaft zu bereichsübergreifender Arbeit ist selbstverständlich. Sie sind als Teamplayer offen für Neues, bringen eine agile und kreative Denkweise mit, arbeiten lösungsorientiert, haben ein open Mindset" und den End to End" Gedanken. Der oder die perfekte Kandidat:in hat eine abgeschlossene technische Ausbildung als Mechaniker und mindestens 3 Jahre Berufserfahrung vorzugsweise in der pharmazeutischen Produktion sowie verfügt über fliessende Deutschkenntnisse. Aufgaben: * Sie sind für die mechanische Verfügbarkeit der Prozessanlagen, inkl. Produktionsbetreuung, Störungsbehebung, Wartung. Problemlösung zuständig (First Level Support) . Fachgerechte Behebung von auftretenden Störungen an hochautomatisierten Anlagen . Erkennen, analysieren und beheben von Störungen im Ablauf von komplexen Steuerungen . Mithilfe bei der Erhöhung der Anlagenverfügbarkeit . Fachgerechte und selbständige Durchführung von geplanten Instandhaltungstätigkeiten . Fachgerechte und selbstständige Durchführung der Formatwechsel an den Prozessanlagen . Sicheres Arbeiten im GMP-Umfeld, u.a. im Reinraum . GMP-gerechte Dokumentation der durchgeführten Instandhaltungstätigkeiten . Unterstützung bei Validierungs-und Qualifizierungstätigkeiten . Schulen von Mitarbeitern im Umgang mit den Anlagen . Unterstützung der Schnittstellen, insbesondere des Betriebs-und Automation Engineerings . Selbstständiges Erarbeiten und ausführen kleinerer Anlagen Optimierungen unter Einhaltung des Change Management" . Mitarbeit und Umsetzung von kontinuierlichen Verbesserungsmaßnahmen (KVP) . Mitarbeit und Unterstützung bei der Verwaltung von Ersatz- und Verschleißteilen . Bereitschaft zum Schichtbetrieb (2-Schichtbetrieb, 3-Schichtbetrieb (kontinuierlich) und 5-Schichtbetrieb (vollkontinuierlich im 6/4-Modell) . Bereitschaft zum Pikettdienst Must Haves: * Abgeschlossene technische Ausbildung als Mechaniker . Mind. 3 Jahre Berufserfahrung idealerweise in der pharmazeutischen Produktion oder in einem stark regulierten Umfeld . Sichere Anwendung von Standard PC-Programmen ( MS Office und Google) . Kenntnisse im SAP-PM-Modul sind von Vorteil . Sehr gute Sprachkenntnisse in Deutsch in Wort und Schrift . Sie bringen neben dem technischen Verständnis eine eigenständige, kommunikative, belastbare und flexible Persönlichkeit mit, haben Freude an selbständiger Arbeit, übernehmen Verantwortung und arbeiten gerne in einem Team * Sie können vorausschauend Denken und Handeln und haben ausgeprägte Fähigkeiten im konzeptionellen Bereich * Exakte und zuverlässige Arbeitsweise auch unter zeitlicher Belastung Nice to haves: . Eine Weiterbildung zum Meister ist von Vorteil . Englischkenntnisse von Vorteil . LPS (Lean Production System) Kenntnisse von Vorteil Reference No.: 923415TP Rolle: Mechaniker Industry: Pharma Location: Kaiseraugst Workload: 100% Start: 01.07.2024 Duration: 24 Deadline : 20.05.2024 Sollte diese Position Ihr Interesse geweckt haben, senden Sie uns bitte Ihr komplettes Dossier via dem Link in dieser Anzeige zu. Über uns: ITech Consult ist ein nach ISO 9001:2015 zertifiziertes Schweizer Unternehmen mit Niederlassungen in Deutschland und Irland. ITech Consult ist spezialisiert auf die Vermittlung von hochqualifizierten Kandidaten für den Personalverleih in den Bereichen IT, Life Science & Engineering. Wir bieten Personalverleih & Payroll Dienstleistungen an. Für unsere Kandidaten ist dies kostenlos, auch bei Payroll berechnen wir Ihnen keine zusätzlichen Gebühren.
We are currently looking on behalf of one of our important clients for a Team Lead Electrical Engineer (German Speaking). The role is a permanent position based in Bern Canton & comes with some home office flexibility. Your Role: Manage & support a team of six manufacturing technology specialists. Hold responsibility for the entire life cycle of high-voltage generators, including their development, production & adaptation to new requirements. Partake in the continuous improvement of manufacturing processes to ensure high quality & efficiency. Act as a point of contact for component management & finding solutions to problems with components & deliveries. Your Skills & Experience: At least 3 years of professional experience in Electrical Engineering within Industrial Environments. Skilled & experienced in Managing Projects. Ideally experienced in Leading Team (or very motivated to gain experience). Your Profile: Completed University Degree as an Electrical Engineer or similar & Training as an Electronics Technician, Automation Technician or Similar. Open, transparent & able to inspire others & work effectively within international environments. Fluent in English & German language skills to at least C1 Level is a mandatory requirement.
02/05/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Electrical Engineer (German Speaking). The role is a permanent position based in Bern Canton & comes with some home office flexibility. Your Role: Manage & support a team of six manufacturing technology specialists. Hold responsibility for the entire life cycle of high-voltage generators, including their development, production & adaptation to new requirements. Partake in the continuous improvement of manufacturing processes to ensure high quality & efficiency. Act as a point of contact for component management & finding solutions to problems with components & deliveries. Your Skills & Experience: At least 3 years of professional experience in Electrical Engineering within Industrial Environments. Skilled & experienced in Managing Projects. Ideally experienced in Leading Team (or very motivated to gain experience). Your Profile: Completed University Degree as an Electrical Engineer or similar & Training as an Electronics Technician, Automation Technician or Similar. Open, transparent & able to inspire others & work effectively within international environments. Fluent in English & German language skills to at least C1 Level is a mandatory requirement.
Software/Application Support, Leading Software/Application Support, C#.NET, SQL, Application Support, AWS, Production issues and fixes, technical documentation, hybrid role 3 days a week in Sevenoaks based office, must be able to drive and own vehicle to get on site. *3 days a week in the office is required as well as being able to drive on site* An exciting financial services firm are looking for a senior level software (application) Support Developer/Engineer to work within a C#.NET environment. Any AWS would be highly desirable. The role will involve: Leading support of software predominately written in C#, T-SQL and web languages. Investigating production issues and implementing fixes where necessary. Developing software changes in response to urgent business needs. Evaluating emerging technologies, frameworks, third party libraries and API's. Building and maintaining application monitoring and logging solutions. Enhancing solutions to make the business more efficient. Writing and updating technical documentation. Technical skills Full stack development of production software using C# and .NET. Strong SQL knowledge Worked with application/network monitoring/logging software like PRTG, SQL Monitor, SEQ etc. Experience in delivering an application support service using helpdesk software eg Zendesk. Understanding of web languages (HTML, CSS, etc.) Worked with a source control system. Software/Application Support, Leading Software/Application Support, C#.NET, SQL, Application Support, AWS, Production issues and fixes, technical documentation, hybrid role 3 days a week in Sevenoaks based office, must be able to drive and own vehicle to get on site.
02/05/2024
Full time
Software/Application Support, Leading Software/Application Support, C#.NET, SQL, Application Support, AWS, Production issues and fixes, technical documentation, hybrid role 3 days a week in Sevenoaks based office, must be able to drive and own vehicle to get on site. *3 days a week in the office is required as well as being able to drive on site* An exciting financial services firm are looking for a senior level software (application) Support Developer/Engineer to work within a C#.NET environment. Any AWS would be highly desirable. The role will involve: Leading support of software predominately written in C#, T-SQL and web languages. Investigating production issues and implementing fixes where necessary. Developing software changes in response to urgent business needs. Evaluating emerging technologies, frameworks, third party libraries and API's. Building and maintaining application monitoring and logging solutions. Enhancing solutions to make the business more efficient. Writing and updating technical documentation. Technical skills Full stack development of production software using C# and .NET. Strong SQL knowledge Worked with application/network monitoring/logging software like PRTG, SQL Monitor, SEQ etc. Experience in delivering an application support service using helpdesk software eg Zendesk. Understanding of web languages (HTML, CSS, etc.) Worked with a source control system. Software/Application Support, Leading Software/Application Support, C#.NET, SQL, Application Support, AWS, Production issues and fixes, technical documentation, hybrid role 3 days a week in Sevenoaks based office, must be able to drive and own vehicle to get on site.
Job description Coating Technician, Full-Time on-site in Leicestershire. Up to 29K (plus Shift Allowance) (Shift Pattern: 06.00 - 14.00/14.00 - 22.00 - Monday - Friday). Possible weekend requirement. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Mission: To assist the coating department by using optical technological knowledge to help with production requirements to meet on-time-delivery requirements. Yield expectations. To stay competitive within the current market and to assist in new product development.To make recommendations for continuous process improvements and may instigate relevant development activity. Key Responsibilities Ability to measure and assess work on the appropriate spectrophotometers. Ability to identify potential coating problems in process and take appropriate corrective action. Ability to identify coating defects such as spatter, striae, delamination, lint marks, comet marks etc. and understand the possible causes and know the type of action to take to avoid their occurrence. Possesses a thorough understanding of relevant Surface Quality Specifications and how the above relates to them. Examine work prior to coating and be satisfied it is fit to coat. Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. Capable of stripping optics safely, observing Local Health and Safety rules. Identify potential problems with the coating plant/measuring equipment and alert the appropriate support staff. Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002. Competent to train colleagues on various aspects of the coating department. Education, Skills Abilities: Qualifications in Mathematics and Physics at least to GCSE or A l evel Computer literacy, including familiarity with Excel and Word The ability to analyse situations and results A good understanding of optical manufacture A good engineering background SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
02/05/2024
Full time
Job description Coating Technician, Full-Time on-site in Leicestershire. Up to 29K (plus Shift Allowance) (Shift Pattern: 06.00 - 14.00/14.00 - 22.00 - Monday - Friday). Possible weekend requirement. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Mission: To assist the coating department by using optical technological knowledge to help with production requirements to meet on-time-delivery requirements. Yield expectations. To stay competitive within the current market and to assist in new product development.To make recommendations for continuous process improvements and may instigate relevant development activity. Key Responsibilities Ability to measure and assess work on the appropriate spectrophotometers. Ability to identify potential coating problems in process and take appropriate corrective action. Ability to identify coating defects such as spatter, striae, delamination, lint marks, comet marks etc. and understand the possible causes and know the type of action to take to avoid their occurrence. Possesses a thorough understanding of relevant Surface Quality Specifications and how the above relates to them. Examine work prior to coating and be satisfied it is fit to coat. Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. Capable of stripping optics safely, observing Local Health and Safety rules. Identify potential problems with the coating plant/measuring equipment and alert the appropriate support staff. Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002. Competent to train colleagues on various aspects of the coating department. Education, Skills Abilities: Qualifications in Mathematics and Physics at least to GCSE or A l evel Computer literacy, including familiarity with Excel and Word The ability to analyse situations and results A good understanding of optical manufacture A good engineering background SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
People Source Consulting Ltd
Warwick, Warwickshire
Role: Mechanical Engineer Location: Warwick + Hybrid working Salary: £40,000 - £60,000 (depending on experience and ability) The Role Power electronics requires collaborative working between electronics engineering and mechanical engineering to ensure thermal management, production feasibility, durability, and service life. As a Mechanical Engineer, reporting to the Mechanical Engineering Team Leader, you will take responsibility for the technical delivery of one or more projects and ensure that the tasks assigned to you are completed in a timely and conscientious fashion. Continued close communication with the relevant project leads is required. You will produce SolidWorks CAD models and associated drawings of complex cooling structures with an eye to manufacturability and cost effectiveness at all times. To assess the effectiveness of these designs you will be required to conduct mechanical and thermal analysis. You will have the opportunity to integrate your own methods and ideas in order to deliver the company's technical innovations. Responsibilities Simulate, Model, and Validate Cooling Structures: Conduct detailed simulations and modelling to design cooling structures that efficiently extract heat from power electronics devices. Validate these designs through rigorous testing, considering both liquid and air cooling methods SolidWorks CAD Design and Prototyping: Utilize SolidWorks to create innovative and efficient CAD designs. Develop associated drawings and guide designs from prototype build to volume manufacturing Sealing System Design and Testing: Design and rigorously test sealing systems for optimal environmental performance on housing component Advanced Manufacturing Processes: Spearhead the development of industry-leading manufacturing processes for machined, sheet metal, and polymer parts Mechanical-Electronics Integration: Specify mechanical connections and interfaces for seamless integration with electronic components. Collaborate with electronics engineers to optimize package size and functionality PCB Component Layout and Durability: Support PCB component layout design, ensuring durability under static, dynamic, and thermal loading conditions Comprehensive Documentation: Produce thorough product documentation, including design notes, bills of materials, and user manuals Quality and Safety Adherence: Apply rigorous quality and safety standards throughout project execution. In house prototyping we build and test our products in house. Mechanical dexterity and ability is required. Customer-Centric Approach: Interpret product requirements from customer specifications and ensure strict adherence. Effectively communicate design concepts to multiple stakeholders, including direct interaction with customers Company Values and Self-Driven Problem Solving: Adhere to company policies and procedures related to testing, quality, and documentation release. Demonstrate a proactive and self-motivated approach to solving engineering challenges. Benefits: You will enjoy working as part of a close-knit team where every individual's contribution matters and where you will have the freedom to interact directly with every member of the business. Hybrid Working Unlimited Leave 5% towards each staff members pension scheme contribution Group Life Insurance (4 times basic annual salary) Employee Assistance Programme Minimum educational qualifications: Degree level education in Mechanical Engineering or related subject. Applicants with equivalent alternative qualifications or experience will be considered. Previous Experience: You will have a minimum of 2 years working within a field of mechanical design or simulation. Other advantageous skills: Knowledge of the use of simulation software - both CFD and FEA. Interest in 3D printing technologies. Good mechanical ability, eg experience of machine shops, product assembly Experience of SolidWorks CAD software Working understanding of electronics Familiarity with high voltage (eg electric vehicle) working Design for manufacture and assembly How to apply? Please send a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
02/05/2024
Full time
Role: Mechanical Engineer Location: Warwick + Hybrid working Salary: £40,000 - £60,000 (depending on experience and ability) The Role Power electronics requires collaborative working between electronics engineering and mechanical engineering to ensure thermal management, production feasibility, durability, and service life. As a Mechanical Engineer, reporting to the Mechanical Engineering Team Leader, you will take responsibility for the technical delivery of one or more projects and ensure that the tasks assigned to you are completed in a timely and conscientious fashion. Continued close communication with the relevant project leads is required. You will produce SolidWorks CAD models and associated drawings of complex cooling structures with an eye to manufacturability and cost effectiveness at all times. To assess the effectiveness of these designs you will be required to conduct mechanical and thermal analysis. You will have the opportunity to integrate your own methods and ideas in order to deliver the company's technical innovations. Responsibilities Simulate, Model, and Validate Cooling Structures: Conduct detailed simulations and modelling to design cooling structures that efficiently extract heat from power electronics devices. Validate these designs through rigorous testing, considering both liquid and air cooling methods SolidWorks CAD Design and Prototyping: Utilize SolidWorks to create innovative and efficient CAD designs. Develop associated drawings and guide designs from prototype build to volume manufacturing Sealing System Design and Testing: Design and rigorously test sealing systems for optimal environmental performance on housing component Advanced Manufacturing Processes: Spearhead the development of industry-leading manufacturing processes for machined, sheet metal, and polymer parts Mechanical-Electronics Integration: Specify mechanical connections and interfaces for seamless integration with electronic components. Collaborate with electronics engineers to optimize package size and functionality PCB Component Layout and Durability: Support PCB component layout design, ensuring durability under static, dynamic, and thermal loading conditions Comprehensive Documentation: Produce thorough product documentation, including design notes, bills of materials, and user manuals Quality and Safety Adherence: Apply rigorous quality and safety standards throughout project execution. In house prototyping we build and test our products in house. Mechanical dexterity and ability is required. Customer-Centric Approach: Interpret product requirements from customer specifications and ensure strict adherence. Effectively communicate design concepts to multiple stakeholders, including direct interaction with customers Company Values and Self-Driven Problem Solving: Adhere to company policies and procedures related to testing, quality, and documentation release. Demonstrate a proactive and self-motivated approach to solving engineering challenges. Benefits: You will enjoy working as part of a close-knit team where every individual's contribution matters and where you will have the freedom to interact directly with every member of the business. Hybrid Working Unlimited Leave 5% towards each staff members pension scheme contribution Group Life Insurance (4 times basic annual salary) Employee Assistance Programme Minimum educational qualifications: Degree level education in Mechanical Engineering or related subject. Applicants with equivalent alternative qualifications or experience will be considered. Previous Experience: You will have a minimum of 2 years working within a field of mechanical design or simulation. Other advantageous skills: Knowledge of the use of simulation software - both CFD and FEA. Interest in 3D printing technologies. Good mechanical ability, eg experience of machine shops, product assembly Experience of SolidWorks CAD software Working understanding of electronics Familiarity with high voltage (eg electric vehicle) working Design for manufacture and assembly How to apply? Please send a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
Senior Software Engineer with strong commercial Machine Learning experience required for a defence & security Machine Learning company. As part of this role, you will be put through SC Clearance (and ideally, also DV clearance), so you must be eligible for these to apply. This role can be worked remotely from within the UK, however you must be able to travel to client sites when required (roughly 1 week every 2 months). As a Senior Software Engineer, you will be working as part of a fantastic, up to date technical environment based around Machine Learning and AI, using Python. You will be client facing and therefore working on a range of innovation projects based around AI/ML, science, and data. Primary technologies used are Python, Typescript/JavaScript, and Kubernetes, as well as production use of ML, so a proficiency in these is required. This is a Senior Software Engineer or Tech Lead level role, so some experience architecting scalable systems within a modern Devops environment is desirable. Senior Software Engineer essential skills Minimum 5 years career experience, ideally using Python as your primary development language Commercial production experience with Machine Learning (ML) and AI is important Strong commercial experience with Typescript and JavaScript You must be comfortable with Kubernetes and the modern Devops environment No work permit holders are allowed as you need to be able to obtain SC and/or DV clearance - ideally you will be a UK national and you must have no criminal history You must be happy travelling to client sites occasionally - roughly 1 week every couple of months If you already hold SC or DV clearance that would be great! There's a starting salary of £90,000-£95,000 plus shares/equity - and lots of other benefits including primarily remote working. There is a great flexible working setup as well, with core working hours, support for higher learning a generous holiday allowance (37 days) all part of the package. This is a fantastic opportunity for Senior Software Engineer or Tech Lead with commercial Machine Learning experience to join a fast-growing company and really further your career in a thriving sector! To apply please send your CV to Rob Goffin at IT Recruitment Solutions. Senior Software Engineer, Tech Lead, Machine Learning, AI, Python, Typescript, JavaScript, Kubernetes, UK, Remote, Travel to clients, Permanent £90,000 - £95,000 + Shares
02/05/2024
Full time
Senior Software Engineer with strong commercial Machine Learning experience required for a defence & security Machine Learning company. As part of this role, you will be put through SC Clearance (and ideally, also DV clearance), so you must be eligible for these to apply. This role can be worked remotely from within the UK, however you must be able to travel to client sites when required (roughly 1 week every 2 months). As a Senior Software Engineer, you will be working as part of a fantastic, up to date technical environment based around Machine Learning and AI, using Python. You will be client facing and therefore working on a range of innovation projects based around AI/ML, science, and data. Primary technologies used are Python, Typescript/JavaScript, and Kubernetes, as well as production use of ML, so a proficiency in these is required. This is a Senior Software Engineer or Tech Lead level role, so some experience architecting scalable systems within a modern Devops environment is desirable. Senior Software Engineer essential skills Minimum 5 years career experience, ideally using Python as your primary development language Commercial production experience with Machine Learning (ML) and AI is important Strong commercial experience with Typescript and JavaScript You must be comfortable with Kubernetes and the modern Devops environment No work permit holders are allowed as you need to be able to obtain SC and/or DV clearance - ideally you will be a UK national and you must have no criminal history You must be happy travelling to client sites occasionally - roughly 1 week every couple of months If you already hold SC or DV clearance that would be great! There's a starting salary of £90,000-£95,000 plus shares/equity - and lots of other benefits including primarily remote working. There is a great flexible working setup as well, with core working hours, support for higher learning a generous holiday allowance (37 days) all part of the package. This is a fantastic opportunity for Senior Software Engineer or Tech Lead with commercial Machine Learning experience to join a fast-growing company and really further your career in a thriving sector! To apply please send your CV to Rob Goffin at IT Recruitment Solutions. Senior Software Engineer, Tech Lead, Machine Learning, AI, Python, Typescript, JavaScript, Kubernetes, UK, Remote, Travel to clients, Permanent £90,000 - £95,000 + Shares