An Electrical/Electronic Engineer is required for a contract assignment with a multi-national leading defence company. Missile Architecture - Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support. It's an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: a) Specifying/determining * system electrical requirements * interface definitions and characteristics between subsystems/equipment * power architecture, including power budget and power profiles * data communication and processing architecture * requirements for EMC, bonding, grounding and screening * signal safety, including routing of safety related signals b) Supporting test and fault-finding activities during compatibility checks, risk reduction, system proving/qualification and integration c) Reviewing and authoring reports, guidelines and processes d) Design assessments and analysis e) Working to defence/industry standards f) Attending and supporting design reviews Alternatively, acting as the Equipment Manager (RMO) for specific electrical/electronic equipment(s) that are part of a missile or launcher system you will: a) Project manage the equipment(s) on behalf of the project during development, qualification and manufacture b) Own the requirements on behalf of the project for the equipment(s) c) Produce Statement(s) of Work for the associated design authority for the equipment(s) d) Create and update plans showing activities for the equipment(s) e) Manage internal & external design authorities for delivery of the equipment(s) hardware, software and deliverables to schedule, cost, quality and performance f) Hold regular progress reviews with the design authority for the equipment(s) g) Review qualification verification evidence h) Track and find resolution to equipment non-compliances i) Attend and support design reviews Skillset/experience required: Technical experience required: * electrical/electronics * interface definitions * knowledge of defence/industry standards, etc. * degree level qualification in a related subject * systems engineering * writing reports Ideally this would be within a defence related background, however, experience within other engineering industries will also be considered. Experience within these other areas are also of interest but not essential: * defence * weapon systems * power supplies * actuators * data communication * sensors * EMC * Health Usage Monitoring Systems (HUMS) * Model Based Engineering (MBE) Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
01/05/2024
Project-based
An Electrical/Electronic Engineer is required for a contract assignment with a multi-national leading defence company. Missile Architecture - Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support. It's an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: a) Specifying/determining * system electrical requirements * interface definitions and characteristics between subsystems/equipment * power architecture, including power budget and power profiles * data communication and processing architecture * requirements for EMC, bonding, grounding and screening * signal safety, including routing of safety related signals b) Supporting test and fault-finding activities during compatibility checks, risk reduction, system proving/qualification and integration c) Reviewing and authoring reports, guidelines and processes d) Design assessments and analysis e) Working to defence/industry standards f) Attending and supporting design reviews Alternatively, acting as the Equipment Manager (RMO) for specific electrical/electronic equipment(s) that are part of a missile or launcher system you will: a) Project manage the equipment(s) on behalf of the project during development, qualification and manufacture b) Own the requirements on behalf of the project for the equipment(s) c) Produce Statement(s) of Work for the associated design authority for the equipment(s) d) Create and update plans showing activities for the equipment(s) e) Manage internal & external design authorities for delivery of the equipment(s) hardware, software and deliverables to schedule, cost, quality and performance f) Hold regular progress reviews with the design authority for the equipment(s) g) Review qualification verification evidence h) Track and find resolution to equipment non-compliances i) Attend and support design reviews Skillset/experience required: Technical experience required: * electrical/electronics * interface definitions * knowledge of defence/industry standards, etc. * degree level qualification in a related subject * systems engineering * writing reports Ideally this would be within a defence related background, however, experience within other engineering industries will also be considered. Experience within these other areas are also of interest but not essential: * defence * weapon systems * power supplies * actuators * data communication * sensors * EMC * Health Usage Monitoring Systems (HUMS) * Model Based Engineering (MBE) Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
Senior Electrical Engineer - Hybrid - Stafford VIQU has partnered with a leading consultancy who deliver critical projects in energy, water, renewables, and manufacturing, with this role being part of the Energy team. Our client is recruiting for a Senior Electrical Engineer to oversee the full E, C & I design and implementation life cycle. The successful Senior Electrical Engineer will work on projects primarily within thermal and hydro power generation. Please note that this is a hybrid role, with 3 days per week required onsite in Stafford. Key skills & responsibilities for the Senior Electrical Engineer: Strong background within Electrical Engineering and E & I Installations Oversee full life cycle design process this includes: Creating designs from customer supplied specifications Supporting Site Acceptance Testing/Commissioning phase Experience within: Control systems within energy/utilities sector Control panel design build Field cabling systems AutoCAD Electrical Documentation to support project delivery (eg Functional Design Specification (FDS), Test Documentation, Manuals etc.) Site surveys, prep Health & Safety documentation Strong communication skills Experience with one of the following would be desirable: Rockwell (ControlLogix) Siemens (PC7S TIA Portal) Schneider (M580 M340) Role details: Job role: Senior Electrical Engineer Job type: Contract Duration: 12 months' contract Rate: £50 - £55 per hour IR35 status: Inside IR35 Location: Hybrid - Stafford To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Suzie Stone , by exploring the VIQU IT Recruitment website .
30/04/2024
Project-based
Senior Electrical Engineer - Hybrid - Stafford VIQU has partnered with a leading consultancy who deliver critical projects in energy, water, renewables, and manufacturing, with this role being part of the Energy team. Our client is recruiting for a Senior Electrical Engineer to oversee the full E, C & I design and implementation life cycle. The successful Senior Electrical Engineer will work on projects primarily within thermal and hydro power generation. Please note that this is a hybrid role, with 3 days per week required onsite in Stafford. Key skills & responsibilities for the Senior Electrical Engineer: Strong background within Electrical Engineering and E & I Installations Oversee full life cycle design process this includes: Creating designs from customer supplied specifications Supporting Site Acceptance Testing/Commissioning phase Experience within: Control systems within energy/utilities sector Control panel design build Field cabling systems AutoCAD Electrical Documentation to support project delivery (eg Functional Design Specification (FDS), Test Documentation, Manuals etc.) Site surveys, prep Health & Safety documentation Strong communication skills Experience with one of the following would be desirable: Rockwell (ControlLogix) Siemens (PC7S TIA Portal) Schneider (M580 M340) Role details: Job role: Senior Electrical Engineer Job type: Contract Duration: 12 months' contract Rate: £50 - £55 per hour IR35 status: Inside IR35 Location: Hybrid - Stafford To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Suzie Stone , by exploring the VIQU IT Recruitment website .
Lead Electrical Engineer - Inside IR35 - €750 per day! We are recruiting an Electrical Engineer for a project in County Clare, Ireland, which is expected to run until the end of February 2026. Our client is in the process of transitioning a power station's primary fuel from coal to heavy fuel oil. The works require the construction of two new heavy fuel oil tanks, new auxiliary boilers, new ash injection system, upgrade of the existing HFO Systems, ancillary systems and modifications to the existing site infrastructure. As an Electrical Engineer you will be tasked to manage the key responsibilities which are listed below: - Perform role of lead electrical engineer and be responsible for the electrical engineering works on site for the successful delivery of the emergency generation projects. Manage Site teams (as required), and liaison with Station Electrical and Instrumentation (E&I) teams. Liaise with Control & Instrumentation, Mechanical and Civil design teams to ensure delivery co-ordination on multi-disciplinary projects. Ensure that electrical systems are installed, tested, and operated safely and efficiently in accordance with regulations, standards, and guidelines. Co-ordinate electrical testing and commissioning activities on Low Voltage (LV), Medium Voltage (MV) and High Voltage (HV) systems and provide advice on testing and commissioning procedures and documentation. Support the management of projects from installation, commissioning, and handover. Support the team of electrical engineers delivering engineering design and support services for generating technologies. Support for the Safety Systems at site and apply a high level of safety standards in every aspect of the work. Skills and Experience Proven track record of significant experience in the power generation industry. A minimum of 7 years' relevant experience is required. Design, and Construction or Commissioning experience, is preferred. Extensive knowledge of electrical equipment utilised in power plant projects, preferably including LV and MV Proven ability to deliver on the key responsibilities outlined above. A proven track record in delivering complex engineering projects and ability to manage multiple projects. Experience of Project Management tools would be an advantage. Working knowledge of Health, Safety and Environment Standards, and Electrical Safety procedures An EU/British passport will be required for this role, as the role requires onsite working Monday to Friday. The daily rate on offer is €750 all-inclusive (no expenses). Further information is available upon request.
30/04/2024
Project-based
Lead Electrical Engineer - Inside IR35 - €750 per day! We are recruiting an Electrical Engineer for a project in County Clare, Ireland, which is expected to run until the end of February 2026. Our client is in the process of transitioning a power station's primary fuel from coal to heavy fuel oil. The works require the construction of two new heavy fuel oil tanks, new auxiliary boilers, new ash injection system, upgrade of the existing HFO Systems, ancillary systems and modifications to the existing site infrastructure. As an Electrical Engineer you will be tasked to manage the key responsibilities which are listed below: - Perform role of lead electrical engineer and be responsible for the electrical engineering works on site for the successful delivery of the emergency generation projects. Manage Site teams (as required), and liaison with Station Electrical and Instrumentation (E&I) teams. Liaise with Control & Instrumentation, Mechanical and Civil design teams to ensure delivery co-ordination on multi-disciplinary projects. Ensure that electrical systems are installed, tested, and operated safely and efficiently in accordance with regulations, standards, and guidelines. Co-ordinate electrical testing and commissioning activities on Low Voltage (LV), Medium Voltage (MV) and High Voltage (HV) systems and provide advice on testing and commissioning procedures and documentation. Support the management of projects from installation, commissioning, and handover. Support the team of electrical engineers delivering engineering design and support services for generating technologies. Support for the Safety Systems at site and apply a high level of safety standards in every aspect of the work. Skills and Experience Proven track record of significant experience in the power generation industry. A minimum of 7 years' relevant experience is required. Design, and Construction or Commissioning experience, is preferred. Extensive knowledge of electrical equipment utilised in power plant projects, preferably including LV and MV Proven ability to deliver on the key responsibilities outlined above. A proven track record in delivering complex engineering projects and ability to manage multiple projects. Experience of Project Management tools would be an advantage. Working knowledge of Health, Safety and Environment Standards, and Electrical Safety procedures An EU/British passport will be required for this role, as the role requires onsite working Monday to Friday. The daily rate on offer is €750 all-inclusive (no expenses). Further information is available upon request.
ENGINEERING MANAGER Up to £75 per hour Plymouth - Hybrid (2-3 days in office) Discovering unparalleled innovation and expertise with a global leader in engineering and technology solutions, looking for an ENGINEERING MANAGER . You will experience top-tier services designed to elevate your projects and exceed expectations working with them. You will be involved in supporting the Design and Safety Manager with day-to-day engineering decisions. Report directly to the Design and Safety Manager and provide support to them, ensuring the delivery of engineering outcomes and the assurance of technical documentation. Skills Required: Managed up to at least 40 engineers. Knowledge of Design and Nuclear Safety. Mechanical/Electrical/Civil experience. Background in Engineering systems and design. Preferred - extensive knowledge of design codes. Join a trusted industry leader committed to driving progress and success on a global scale. Unlock new possibilities for your ventures with their esteemed team in Defence, Nuclear, Marine, and more. *PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role.
29/04/2024
Project-based
ENGINEERING MANAGER Up to £75 per hour Plymouth - Hybrid (2-3 days in office) Discovering unparalleled innovation and expertise with a global leader in engineering and technology solutions, looking for an ENGINEERING MANAGER . You will experience top-tier services designed to elevate your projects and exceed expectations working with them. You will be involved in supporting the Design and Safety Manager with day-to-day engineering decisions. Report directly to the Design and Safety Manager and provide support to them, ensuring the delivery of engineering outcomes and the assurance of technical documentation. Skills Required: Managed up to at least 40 engineers. Knowledge of Design and Nuclear Safety. Mechanical/Electrical/Civil experience. Background in Engineering systems and design. Preferred - extensive knowledge of design codes. Join a trusted industry leader committed to driving progress and success on a global scale. Unlock new possibilities for your ventures with their esteemed team in Defence, Nuclear, Marine, and more. *PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role.
Introduction: Our client stands as an approved Maintenance Repair Organisation accredited by both EASA and UK CAA, entrusted with delivering Line & Base Maintenance services for a range of aircraft including the B737 NG, B737 Max, B777, and B787. As part of their ongoing growth, we are seeking B1 Licensed Aircraft Engineers to join our esteemed organisation. Candidates should hold a valid UK CAA Category B1 Part-66 Licence, with type ratings on B737 NG, B777, and/or B787 aircraft. Responsibilities: The B1 Licensed Aircraft Engineer will take charge of supervising Mechanics and overseeing inspection and certification of scheduled maintenance tasks, defect rectification, modifications, structural repairs, and functional tests across Airframe, Engine, and Electrical systems. They will collaborate closely with the Aircraft Check Manager to ensure the completion of daily workload tasks and adherence to the production plan. These positions will be under the guidance of the Maintenance Manager - Production and are stationed at our London Gatwick Hangar facility, offering various shift patterns for flexibility. Key Responsibilities: Supervising Mechanics performing Base Maintenance on customer aircraft. Inspecting and certifying scheduled maintenance tasks, defect rectification, modifications, structural repairs, and functional tests on Airframe, Engine, and Electrical systems. Completing all assigned work promptly to minimise aircraft downtime. Ensuring accurate completion of aircraft technical log books, maintenance documentation, job cards, work packages, and zonal handovers within designated timelines. Maintaining high standards of cleanliness and organisation within assigned work areas. Adhering to regulatory requirements, company processes, and procedures. Fostering a culture of safety and reporting all incidents and occurrences in the Boeing Safety Management System. Highlighting technical issues, discrepancies, or other concerns to the Aircraft Check Manager. Actively contributing to continuous improvement initiatives and lean principles. Assisting the management team in the day-to-day operations of the London Gatwick Operation. Undertaking additional duties as required, including potential work away from London Gatwick. Required Qualifications and Experience: Hold a valid UK CAA Category B1 Part-66 Licence. Type rating on one or more of the following aircraft - B737 NG, B777, or B787. Minimum of 1 year exercising certification privileges in a Line or Base Maintenance environment. Demonstrate 6 months recent experience on type and ability to maintain appropriate company authorisations specific to the role. Thorough understanding of Part-145 regulations. Previous experience using AMOS or other Maintenance Management Systems. Strong communication skills and effective problem-solving abilities. Flexibility to adjust working hours to meet operational demands. Team-oriented mindset with a commitment to exceeding internal and external customer expectations. Proficiency in using Microsoft Office applications and willingness to learn in-house systems. Eligibility to hold a London Gatwick Airport airside pass. Candidates must have the right to live and work in the United Kingdom. Work Authorisation: This position is open to locally hired candidates in the United Kingdom who possess current legal authorisation to work in the country. Sadly, our client will not pursue immigration or labour sponsorship for applicants.
26/04/2024
Project-based
Introduction: Our client stands as an approved Maintenance Repair Organisation accredited by both EASA and UK CAA, entrusted with delivering Line & Base Maintenance services for a range of aircraft including the B737 NG, B737 Max, B777, and B787. As part of their ongoing growth, we are seeking B1 Licensed Aircraft Engineers to join our esteemed organisation. Candidates should hold a valid UK CAA Category B1 Part-66 Licence, with type ratings on B737 NG, B777, and/or B787 aircraft. Responsibilities: The B1 Licensed Aircraft Engineer will take charge of supervising Mechanics and overseeing inspection and certification of scheduled maintenance tasks, defect rectification, modifications, structural repairs, and functional tests across Airframe, Engine, and Electrical systems. They will collaborate closely with the Aircraft Check Manager to ensure the completion of daily workload tasks and adherence to the production plan. These positions will be under the guidance of the Maintenance Manager - Production and are stationed at our London Gatwick Hangar facility, offering various shift patterns for flexibility. Key Responsibilities: Supervising Mechanics performing Base Maintenance on customer aircraft. Inspecting and certifying scheduled maintenance tasks, defect rectification, modifications, structural repairs, and functional tests on Airframe, Engine, and Electrical systems. Completing all assigned work promptly to minimise aircraft downtime. Ensuring accurate completion of aircraft technical log books, maintenance documentation, job cards, work packages, and zonal handovers within designated timelines. Maintaining high standards of cleanliness and organisation within assigned work areas. Adhering to regulatory requirements, company processes, and procedures. Fostering a culture of safety and reporting all incidents and occurrences in the Boeing Safety Management System. Highlighting technical issues, discrepancies, or other concerns to the Aircraft Check Manager. Actively contributing to continuous improvement initiatives and lean principles. Assisting the management team in the day-to-day operations of the London Gatwick Operation. Undertaking additional duties as required, including potential work away from London Gatwick. Required Qualifications and Experience: Hold a valid UK CAA Category B1 Part-66 Licence. Type rating on one or more of the following aircraft - B737 NG, B777, or B787. Minimum of 1 year exercising certification privileges in a Line or Base Maintenance environment. Demonstrate 6 months recent experience on type and ability to maintain appropriate company authorisations specific to the role. Thorough understanding of Part-145 regulations. Previous experience using AMOS or other Maintenance Management Systems. Strong communication skills and effective problem-solving abilities. Flexibility to adjust working hours to meet operational demands. Team-oriented mindset with a commitment to exceeding internal and external customer expectations. Proficiency in using Microsoft Office applications and willingness to learn in-house systems. Eligibility to hold a London Gatwick Airport airside pass. Candidates must have the right to live and work in the United Kingdom. Work Authorisation: This position is open to locally hired candidates in the United Kingdom who possess current legal authorisation to work in the country. Sadly, our client will not pursue immigration or labour sponsorship for applicants.
PRINCIPAL EC&I ELECTRICAL ENGINEER Up to £68 per hour. Warrington & Cumbria - Hybrid The company that specializes in providing nuclear engineering and technical services globally is currently looking for PRINCIPAL EC&I ELECTRICAL ENGINEER . With a focus on innovation and safety, it offers a range of solutions for nuclear power plants and facilities. Through collaboration with industry partners, it drives advancements in nuclear technology and safety practices. The engineer will be an expert in diverse engineering drawings, including Block Cable and Single Line Diagrams. You will be involved in Meticulous documentation, creating precise Termination Drawings and detailed instrument datasheets. Holistic capabilities in Electrical Power Distribution, Control Systems, and Instrumentation Design for effective contribution to multidisciplinary projects. Skills Required: EC&I Electrical designing experience. Electrical Power Distribution Design. Knowledge of 61508 (electrical safety mechs). Create control & instrumentation systems. If you are looking to collaborate with industry partners and continue to drive advancements in nuclear technology and safety practices, then this role is for you. * PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role.
26/04/2024
Project-based
PRINCIPAL EC&I ELECTRICAL ENGINEER Up to £68 per hour. Warrington & Cumbria - Hybrid The company that specializes in providing nuclear engineering and technical services globally is currently looking for PRINCIPAL EC&I ELECTRICAL ENGINEER . With a focus on innovation and safety, it offers a range of solutions for nuclear power plants and facilities. Through collaboration with industry partners, it drives advancements in nuclear technology and safety practices. The engineer will be an expert in diverse engineering drawings, including Block Cable and Single Line Diagrams. You will be involved in Meticulous documentation, creating precise Termination Drawings and detailed instrument datasheets. Holistic capabilities in Electrical Power Distribution, Control Systems, and Instrumentation Design for effective contribution to multidisciplinary projects. Skills Required: EC&I Electrical designing experience. Electrical Power Distribution Design. Knowledge of 61508 (electrical safety mechs). Create control & instrumentation systems. If you are looking to collaborate with industry partners and continue to drive advancements in nuclear technology and safety practices, then this role is for you. * PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role.