We are currently looking on behalf of one of our important clients for a Team Lead Electrical Engineer (German Speaking). The role is a permanent position based in Bern Canton & comes with some home office flexibility. Your Role: Manage & support a team of six manufacturing technology specialists. Hold responsibility for the entire life cycle of high-voltage generators, including their development, production & adaptation to new requirements. Partake in the continuous improvement of manufacturing processes to ensure high quality & efficiency. Act as a point of contact for component management & finding solutions to problems with components & deliveries. Your Skills & Experience: At least 3 years of professional experience in Electrical Engineering within Industrial Environments. Skilled & experienced in Managing Projects. Ideally experienced in Leading Team (or very motivated to gain experience). Your Profile: Completed University Degree as an Electrical Engineer or similar & Training as an Electronics Technician, Automation Technician or Similar. Open, transparent & able to inspire others & work effectively within international environments. Fluent in English & German language skills to at least C1 Level is a mandatory requirement.
16/05/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Electrical Engineer (German Speaking). The role is a permanent position based in Bern Canton & comes with some home office flexibility. Your Role: Manage & support a team of six manufacturing technology specialists. Hold responsibility for the entire life cycle of high-voltage generators, including their development, production & adaptation to new requirements. Partake in the continuous improvement of manufacturing processes to ensure high quality & efficiency. Act as a point of contact for component management & finding solutions to problems with components & deliveries. Your Skills & Experience: At least 3 years of professional experience in Electrical Engineering within Industrial Environments. Skilled & experienced in Managing Projects. Ideally experienced in Leading Team (or very motivated to gain experience). Your Profile: Completed University Degree as an Electrical Engineer or similar & Training as an Electronics Technician, Automation Technician or Similar. Open, transparent & able to inspire others & work effectively within international environments. Fluent in English & German language skills to at least C1 Level is a mandatory requirement.
My client based in Canterbury are urgently looking for an Administrator to join the team on an initial 4 month contract. The suitable Administrator must have worked in an Engineering/Mechanical/Electrical/Electronics environment. The Administrator will ideally have experience with PLM Systems and software, implementing various error codes This role will also involve manually entering and transferring data into a new system from old records. Any knowledge of CAD tools is also beneficial. For more information and a confidential chat about the role please contact Mimi (see below) By applying to this advert you are giving CPS Group (UK) Ltd authority to hold and process your data for this specific role and any other roles we may deem suitable to you over time. We will not pass your data to any third party without your verbal or written permission to do so. All incoming and outgoing calls are recorded for training and compliance purposes. CPS Group (UK) Ltd is acting as an Employment Agency in relation to this vacancy. Our new privacy policy can be found on our website
16/05/2024
Project-based
My client based in Canterbury are urgently looking for an Administrator to join the team on an initial 4 month contract. The suitable Administrator must have worked in an Engineering/Mechanical/Electrical/Electronics environment. The Administrator will ideally have experience with PLM Systems and software, implementing various error codes This role will also involve manually entering and transferring data into a new system from old records. Any knowledge of CAD tools is also beneficial. For more information and a confidential chat about the role please contact Mimi (see below) By applying to this advert you are giving CPS Group (UK) Ltd authority to hold and process your data for this specific role and any other roles we may deem suitable to you over time. We will not pass your data to any third party without your verbal or written permission to do so. All incoming and outgoing calls are recorded for training and compliance purposes. CPS Group (UK) Ltd is acting as an Employment Agency in relation to this vacancy. Our new privacy policy can be found on our website
Electronics Engineer Alton, Hampshire £50k - £70K DOE Role details: We are working with an innovative Space company with world class expertise in Spacecraft. They design, build and operate space missions for global customers. They are looking for an Electronics Engineer to support on a range of activities from detailed design, development, documentation and test through to wider spacecraft support. Responsibilities: Derivation and management of technical requirements from Mission and System Level to subsystem and equipment level Design, development, prototyping, build and test of electronic circuits and systems from initial requirements through to launch and in-orbit operations Detailed design activities including Schematic production; Selection and procurement of relevant components and assemblies to support design and development activities; ECAD design either directly or managing a specialist Produce electronics documentation, eg SoW, Design Document, Interface Control Document, Test Plans Requirements: Educated to at least degree - level or equivalent in a relevant scientific or engineering discipline Technical delivery of complex electrical/electronic systems, ideally on a satellite programme (or in the Aerospace or automotive sector) Proficient in use of appropriate technical tools (eg Altium, OrCAD, PSpice) Experience in documentation for space/aerospace projects (highly desirable) Experience in testing and test automation Benefits: 37.5 hour working week, Flexible working, 30 days holiday 10% Pension, Bonus Life insurance, Private medical, Income protection Eligibility: To be considered for the role, you must have permanent UK residency status.
14/05/2024
Full time
Electronics Engineer Alton, Hampshire £50k - £70K DOE Role details: We are working with an innovative Space company with world class expertise in Spacecraft. They design, build and operate space missions for global customers. They are looking for an Electronics Engineer to support on a range of activities from detailed design, development, documentation and test through to wider spacecraft support. Responsibilities: Derivation and management of technical requirements from Mission and System Level to subsystem and equipment level Design, development, prototyping, build and test of electronic circuits and systems from initial requirements through to launch and in-orbit operations Detailed design activities including Schematic production; Selection and procurement of relevant components and assemblies to support design and development activities; ECAD design either directly or managing a specialist Produce electronics documentation, eg SoW, Design Document, Interface Control Document, Test Plans Requirements: Educated to at least degree - level or equivalent in a relevant scientific or engineering discipline Technical delivery of complex electrical/electronic systems, ideally on a satellite programme (or in the Aerospace or automotive sector) Proficient in use of appropriate technical tools (eg Altium, OrCAD, PSpice) Experience in documentation for space/aerospace projects (highly desirable) Experience in testing and test automation Benefits: 37.5 hour working week, Flexible working, 30 days holiday 10% Pension, Bonus Life insurance, Private medical, Income protection Eligibility: To be considered for the role, you must have permanent UK residency status.
CAD Engineer Initial freelance contract until end of 2024 + option to extend Eindhoven, Netherlands (1 day remote per week possible) Our client: Provides High Performance Mixed Signal and Standard Product solutions that leverage its leading RF, Analog, Power Management, Interface, Security and Digital Processing expertise. These innovations are used in a wide range of automotive, identification, wireless infrastructure, lighting, industrial, mobile, consumer and computing applications. A global semiconductor company with operations in more than 45 countries, over 45,000 employees and a revenue of over $10 billion. Department: Design Enablement is a central technology development organization within our client which defines and supports their hardware design methodologies and EDA tools enabling differentiation for their IP/SOC development. Deployment and support of IC design flow and tools used inside our client. DFT design teams support in order to proactively understand their needs, to implement solutions to address new technical challenges or recurring problems impacting the development of new products. The mission will consist in: . Develop our client's proprietary tools, flows and methodologies to address DFT related challenges . Develop/Design/Implement/Test/Document reliable and maintainable software . Develop specifications in a good interaction with product managers, peer engineers, support engineers . Develop/maintain a broad knowledge of technical developments in software application domain . Support the development and/or execution of test specifications developed by application engineers . Support the maintenance of department products/solutions Job Qualifications: . Bachelor or Master Degree in Computer Science, Electronic, Electrical Engineering or equivalent . Around 2 - 6+ years of working experience in semiconductor industry, preferably diagnostics in CAD/EDA space. . Practical knowledge of object-oriented programming and clean code principles . Solid hands-on experience in developing tools, automation flows using Python, modern C++ (C++ 11 and up), TCL, Linux and bash script along with hands on exposure to SQL or NoSQL databases Preferred competencies: . Has experience with automated tests and unit tests . Acumen in Software development life cycle. Hand-On experience in agile techniques using git and JIRA . Experience with DfT methodologies, design and test automation on diagnostics and a working understanding of fault models with scan test is considered a pro . Has affinity for all aspects of DfT architecture and Design Methodology . Experience to work in a multicultural environment Soft skills: . Persistent in problem solving, never give up mentality in a dynamic environment . Frugal, result oriented, KPI driven and customer obsession . Willingness to improve internal processes and way of working. . Good communication skills . An enthusiastic team worker . Fluent in English language, verbal and written. Command of the Dutch language is a plus, but no prerequisite
14/05/2024
Project-based
CAD Engineer Initial freelance contract until end of 2024 + option to extend Eindhoven, Netherlands (1 day remote per week possible) Our client: Provides High Performance Mixed Signal and Standard Product solutions that leverage its leading RF, Analog, Power Management, Interface, Security and Digital Processing expertise. These innovations are used in a wide range of automotive, identification, wireless infrastructure, lighting, industrial, mobile, consumer and computing applications. A global semiconductor company with operations in more than 45 countries, over 45,000 employees and a revenue of over $10 billion. Department: Design Enablement is a central technology development organization within our client which defines and supports their hardware design methodologies and EDA tools enabling differentiation for their IP/SOC development. Deployment and support of IC design flow and tools used inside our client. DFT design teams support in order to proactively understand their needs, to implement solutions to address new technical challenges or recurring problems impacting the development of new products. The mission will consist in: . Develop our client's proprietary tools, flows and methodologies to address DFT related challenges . Develop/Design/Implement/Test/Document reliable and maintainable software . Develop specifications in a good interaction with product managers, peer engineers, support engineers . Develop/maintain a broad knowledge of technical developments in software application domain . Support the development and/or execution of test specifications developed by application engineers . Support the maintenance of department products/solutions Job Qualifications: . Bachelor or Master Degree in Computer Science, Electronic, Electrical Engineering or equivalent . Around 2 - 6+ years of working experience in semiconductor industry, preferably diagnostics in CAD/EDA space. . Practical knowledge of object-oriented programming and clean code principles . Solid hands-on experience in developing tools, automation flows using Python, modern C++ (C++ 11 and up), TCL, Linux and bash script along with hands on exposure to SQL or NoSQL databases Preferred competencies: . Has experience with automated tests and unit tests . Acumen in Software development life cycle. Hand-On experience in agile techniques using git and JIRA . Experience with DfT methodologies, design and test automation on diagnostics and a working understanding of fault models with scan test is considered a pro . Has affinity for all aspects of DfT architecture and Design Methodology . Experience to work in a multicultural environment Soft skills: . Persistent in problem solving, never give up mentality in a dynamic environment . Frugal, result oriented, KPI driven and customer obsession . Willingness to improve internal processes and way of working. . Good communication skills . An enthusiastic team worker . Fluent in English language, verbal and written. Command of the Dutch language is a plus, but no prerequisite
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
13/05/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
Assembly Support Engineer (Flipchip/Wirebonding/SMT processes) Initial 1 year freelance contract + extensions Leuven, Belgium Please note that working from home is not possible for this position, as the nature of the tasks involved requires being physically present in the office. We believe in fostering a vibrant and interactive work environment that promotes effective collaboration, creativity, and productivity in this challenging assignment. Support & coordinate assembly engineering related activities to suppliers/subcontractors to make sure that assembled devices will have no issue and is delivered in time. The assignment Lead the development and implementation of flipchip, wirebonding, and SMT assembly processes to meet quality, cost, and delivery targets. Collaborate with cross-functional teams, including R&D, Manufacturing, and Quality Assurance, to drive new product and resolve assembly-related issues. Conduct process characterization and optimization studies to improve yield, efficiency, and reliability. Provide technical expertise and guidance on assembly processes. Maintain documentation, including work instructions, and process specifications. Required knowledge and skills Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related field. Advanced degree preferred. Minimum 5 years of experience in assembly engineering, with a focus on flipchip, wirebonding, and SMT processes in a semiconductor or electronics manufacturing environment. Proficiency in using assembly equipment such as wire bonders, flipchip bonders, and SMT placement machines. Strong understanding of assembly materials, including solder, adhesives, and underfills. Experience with statistical analysis tools and methodologies for process optimization (eg, Design of Experiments, Statistical Process Control). Excellent problem-solving skills and the ability to troubleshoot complex assembly issues. Hands-on experience in flipchip, wirebonding, and SMT assembly processes.
13/05/2024
Project-based
Assembly Support Engineer (Flipchip/Wirebonding/SMT processes) Initial 1 year freelance contract + extensions Leuven, Belgium Please note that working from home is not possible for this position, as the nature of the tasks involved requires being physically present in the office. We believe in fostering a vibrant and interactive work environment that promotes effective collaboration, creativity, and productivity in this challenging assignment. Support & coordinate assembly engineering related activities to suppliers/subcontractors to make sure that assembled devices will have no issue and is delivered in time. The assignment Lead the development and implementation of flipchip, wirebonding, and SMT assembly processes to meet quality, cost, and delivery targets. Collaborate with cross-functional teams, including R&D, Manufacturing, and Quality Assurance, to drive new product and resolve assembly-related issues. Conduct process characterization and optimization studies to improve yield, efficiency, and reliability. Provide technical expertise and guidance on assembly processes. Maintain documentation, including work instructions, and process specifications. Required knowledge and skills Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related field. Advanced degree preferred. Minimum 5 years of experience in assembly engineering, with a focus on flipchip, wirebonding, and SMT processes in a semiconductor or electronics manufacturing environment. Proficiency in using assembly equipment such as wire bonders, flipchip bonders, and SMT placement machines. Strong understanding of assembly materials, including solder, adhesives, and underfills. Experience with statistical analysis tools and methodologies for process optimization (eg, Design of Experiments, Statistical Process Control). Excellent problem-solving skills and the ability to troubleshoot complex assembly issues. Hands-on experience in flipchip, wirebonding, and SMT assembly processes.
FIELD SERVICE ENGINEER Covering UK&IRE £40,000 - £50,000 + Excellent benefits Monday - Friday - door to door (44 hours) One of the UK's leading suppliers of highly complex process sterilisation and quality process equipment is now recruiting for a Field Service Engineer to join their busy and expanding field service engineering team to cover UK&IRE. As the field service engineer, you will be required to travel to customer sites in the pharmaceutical and life-sciences field, carrying out repair and maintenance on a diverse range of technologies including autoclaves/sterilisers, RO systems, steam generators etc. Key responsibilities as the Field Service Engineer: You will be required to travel across the UK and Ireland and will include nights away from home. Provide preventative maintenance, calibration and technical support, to a standard consistent with the high quality of the equipment and services the organisation supply and with the reasonable expectations of the customers. Undertake fault finding/rectification assignments as delegated by the management team Creating, preparing and managing servicing and calibration documentation as delegated by the management team Managing specific service spares Role specific administration such as reporting, expenses, and time sheets Proper management of the organisations equipment, including test equipment, computer equipment etc. Support the training of other Field Service Engineers Provide FAT support as required. Additional administrative duties as required, including but not limited to, protocol review, document creation as per QMS. Adhering to policies and procedures at all times Experience required - Field Service Engineer: ONC/HNC or equivalent in engineering (mechanical, electrical, electronic etc.) Multi-skilled engineer who has carried out service, repair and maintenance on industrial sized electro-mechanical machinery Industry background could be; FMCG, Ex-Military (Navy, REME, RAF etc.), Automation, Robotics, Pharmaceutical, Biotechnology, Semi-Conductor, Oil & Gas etc. Flexible to travel and stay away as and when required as a field service engineer Valid, UK driving licence Package/benefits: £40,000 - £50,000 depending on experience Company performance bonus Paid overtime x1.5 - Monday Friday any hours over 44 hrs (door to door travel) Overnight stay allowance - £20 for first night away raising an extra £10 per night for consecutive nights (Capped at £110/night). Once fully out on your own - Night 1-4 -£62 p/n, nights 5-7 - £80 p/n, nights 8 onwards is £100p/n. Lunch allowance Company vehicle included for personal use or the option for business use only Company Pension scheme 25 dyas holiday + bank Company phone & laptop Tools and uniform supplied Annual salary reviews (linked to inflation) plus continuously review salary in relation to performance. If you are and experienced multi-skilled field service engineer interested in making an application, please click APPLY NOW and a CBSbutler representative will be in touch to discuss this exciting opportunity.
10/05/2024
Full time
FIELD SERVICE ENGINEER Covering UK&IRE £40,000 - £50,000 + Excellent benefits Monday - Friday - door to door (44 hours) One of the UK's leading suppliers of highly complex process sterilisation and quality process equipment is now recruiting for a Field Service Engineer to join their busy and expanding field service engineering team to cover UK&IRE. As the field service engineer, you will be required to travel to customer sites in the pharmaceutical and life-sciences field, carrying out repair and maintenance on a diverse range of technologies including autoclaves/sterilisers, RO systems, steam generators etc. Key responsibilities as the Field Service Engineer: You will be required to travel across the UK and Ireland and will include nights away from home. Provide preventative maintenance, calibration and technical support, to a standard consistent with the high quality of the equipment and services the organisation supply and with the reasonable expectations of the customers. Undertake fault finding/rectification assignments as delegated by the management team Creating, preparing and managing servicing and calibration documentation as delegated by the management team Managing specific service spares Role specific administration such as reporting, expenses, and time sheets Proper management of the organisations equipment, including test equipment, computer equipment etc. Support the training of other Field Service Engineers Provide FAT support as required. Additional administrative duties as required, including but not limited to, protocol review, document creation as per QMS. Adhering to policies and procedures at all times Experience required - Field Service Engineer: ONC/HNC or equivalent in engineering (mechanical, electrical, electronic etc.) Multi-skilled engineer who has carried out service, repair and maintenance on industrial sized electro-mechanical machinery Industry background could be; FMCG, Ex-Military (Navy, REME, RAF etc.), Automation, Robotics, Pharmaceutical, Biotechnology, Semi-Conductor, Oil & Gas etc. Flexible to travel and stay away as and when required as a field service engineer Valid, UK driving licence Package/benefits: £40,000 - £50,000 depending on experience Company performance bonus Paid overtime x1.5 - Monday Friday any hours over 44 hrs (door to door travel) Overnight stay allowance - £20 for first night away raising an extra £10 per night for consecutive nights (Capped at £110/night). Once fully out on your own - Night 1-4 -£62 p/n, nights 5-7 - £80 p/n, nights 8 onwards is £100p/n. Lunch allowance Company vehicle included for personal use or the option for business use only Company Pension scheme 25 dyas holiday + bank Company phone & laptop Tools and uniform supplied Annual salary reviews (linked to inflation) plus continuously review salary in relation to performance. If you are and experienced multi-skilled field service engineer interested in making an application, please click APPLY NOW and a CBSbutler representative will be in touch to discuss this exciting opportunity.