ARM (Advanced Resource Managers)
Corsham, Wiltshire
Lead Mechanical Engineer (Assembly, Integration & Testing) Corsham 12-month contract Paying up to £45p/h (Umbrella) ARM have partnered with an Aerospace client who are looking for an experienced AIT engineer to work out of their manufacturing site based in Corsham. As the AIT Lead Engineer, you'll be responsible for leading the Mechanical team and ensuring all engineering concepts are delivered to the shop floor. Responsibilities: * Leading a team of AIT engineers on specific projects as well as planning the mechanical team's activities on a weekly basis. * Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A - E' * Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures, and test reports. * Control of all project MGSE, flight & support equipment * Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. * Alignment - producing test procedures and operating and maintaining optical alignment equipment. * Designing test equipment, overseeing its manufacture, and commissioning * Mechanical handling of spacecraft, instruments, payloads, solar arrays, antennas etc * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Install and validate test instrumentation. * Support propulsion testing * Handling and installation of thermal hardware * Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation associated with performing these tasks. * Pyrotechnic handling, installation, and safety * Plan and control the workload of the AIT team consisting of engineers and technicians. * Be able to travel overseas to work for short periods (typically 2-3 months, could be 6-7 months on occasions) * Be able to integrate quickly and easily into an AIT team. Experience required: * Appreciation of satellite integration processes and project phases * Use of SAP or other ERP System * Understanding of build documentation and the need for it * Driving build quality through review of processes and implementation of improvements * Managing a team during day-to-day activities ensuring work is completed on time and the correct standard. * Controlling and delivery of projects to budget and schedule * Face-to-face dealings with customers and suppliers * Worked in volatile, high-pressure environments to resolve technical and personnel conflicts. * Spacecraft Mechanical testing on prime projects is essential. * Leading other team members * Production of MGSE specs and operation of MGSE and flight HW * Production of high-quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
03/05/2024
Project-based
Lead Mechanical Engineer (Assembly, Integration & Testing) Corsham 12-month contract Paying up to £45p/h (Umbrella) ARM have partnered with an Aerospace client who are looking for an experienced AIT engineer to work out of their manufacturing site based in Corsham. As the AIT Lead Engineer, you'll be responsible for leading the Mechanical team and ensuring all engineering concepts are delivered to the shop floor. Responsibilities: * Leading a team of AIT engineers on specific projects as well as planning the mechanical team's activities on a weekly basis. * Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A - E' * Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures, and test reports. * Control of all project MGSE, flight & support equipment * Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. * Alignment - producing test procedures and operating and maintaining optical alignment equipment. * Designing test equipment, overseeing its manufacture, and commissioning * Mechanical handling of spacecraft, instruments, payloads, solar arrays, antennas etc * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Install and validate test instrumentation. * Support propulsion testing * Handling and installation of thermal hardware * Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation associated with performing these tasks. * Pyrotechnic handling, installation, and safety * Plan and control the workload of the AIT team consisting of engineers and technicians. * Be able to travel overseas to work for short periods (typically 2-3 months, could be 6-7 months on occasions) * Be able to integrate quickly and easily into an AIT team. Experience required: * Appreciation of satellite integration processes and project phases * Use of SAP or other ERP System * Understanding of build documentation and the need for it * Driving build quality through review of processes and implementation of improvements * Managing a team during day-to-day activities ensuring work is completed on time and the correct standard. * Controlling and delivery of projects to budget and schedule * Face-to-face dealings with customers and suppliers * Worked in volatile, high-pressure environments to resolve technical and personnel conflicts. * Spacecraft Mechanical testing on prime projects is essential. * Leading other team members * Production of MGSE specs and operation of MGSE and flight HW * Production of high-quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Senior Systems Engineer - Inside IR35 - DOORS - Integration - Software Systems - Hybrid - 2 days WFH This role applies systems engineering processes and skills to systematically convert customer requirements into total systems solutions that acknowledge technical, schedule and cost constraints. Responsible for systems planning, system and lower level requirements development, system design, analyses and trade studies, hardware/software design oversight, system integration, system level test oversight, and subcontractor technical oversight. Provide input and support for project risk management activities. Essential Job Duties and Responsibilities: Requirements analysis, capture and decomposition on large integration projects. This will naturally involve customer engagement/workshops and provide/manage compliancy status with all internal/external stakeholders Technical leadership and responsibility in the analysis and design of cost-effective system solutions, to agreed timescales and budgets and to a high standard of engineering Create, analyses and document solutions traceable to the customer, business and solution requirements in accordance with processes and system engineering methodologies. This involves generating system architecture designs, functional designs, interfaces specifications, statements of work, integration and test strategies and any relevant systems engineering artefacts Lead the integration, verification, validation, and qualification planning and definition activities, and lead and participate in those activities as required Produce detailed Systems Engineering estimates and technical specifications (SOW) for proposals and budgeting purposes Provide input regarding systems engineering tasks to project planners and plans Work collaboratively with other management and engineering disciplines to ensure project objectives are met Prepare and present systems proposals to customers and provide technical support to sales and marketing activity Report to management on Systems Engineering performance against specification, budget, timescale and quality requirements, to identify deviations from plan and carry out corrective action Evaluate design, development and integration executed by subcontractors against requirements Participate in formal meetings with customers and subcontractors and to travel to customers' sites to perform or supervise activities Keep up to date on the latest developments in systems engineering, computers, microprocessors, communications systems and software techniques relevant to the company's operation Develop and promote quality engineering practices in the department and support Systems Engineering process improvement projects and promotion of quality engineering practices in the department Train, coach and mentor less-experienced members of the department in order to foster their career development Travel domestically or internationally as required to meet the needs of any given project Comply with values and adherence to all company policy and procedures. Comply with the code of conduct, quality, security and occupational health, safety and environmental policies and procedures. In addition to the duties and responsibilities listed, the job holder is required to perform other duties assigned by their manager from time-to-time, as may be reasonably required of them. Minimum Job Requirements: Skills knowledge and experience: Essential: Demonstrable experience in: o requirements analysis preferably using a formal requirements management tool o system definition, design and control o solution integration, verification and validation o systems engineering methodologies Proven track record of providing technical expertise on complex integration projects Stakeholder/customer management experience Aware of software development best practice and able to apply standards and procedures effectively Ability to create high quality documentation and presentation skills Desirable: Experience in ticketing and automated fare collection, or similar applications involving large networks of unattended/passenger-operated devices Demonstrable knowledge of implementing the certification requirements of systems and devices in accordance to Payment Card Industry (PCI) standards Experience of requirements management, ideally using the DOORS product Tool driven system design using UML and Enterprise Architect or another structured methodology Implementation and deployment knowledge from Windows and UNIX environments Knowledge of financial and regulatory practices within business. Education and qualifications Essential: Engineering Degree in relevant discipline or equivalent qualification/experience Demonstrable and solid experience as a system engineer on complex integration projects Desirable: Master's Degree in a relevant discipline or equivalent qualification/experience INCOSE certification ITIL certification
03/05/2024
Project-based
Senior Systems Engineer - Inside IR35 - DOORS - Integration - Software Systems - Hybrid - 2 days WFH This role applies systems engineering processes and skills to systematically convert customer requirements into total systems solutions that acknowledge technical, schedule and cost constraints. Responsible for systems planning, system and lower level requirements development, system design, analyses and trade studies, hardware/software design oversight, system integration, system level test oversight, and subcontractor technical oversight. Provide input and support for project risk management activities. Essential Job Duties and Responsibilities: Requirements analysis, capture and decomposition on large integration projects. This will naturally involve customer engagement/workshops and provide/manage compliancy status with all internal/external stakeholders Technical leadership and responsibility in the analysis and design of cost-effective system solutions, to agreed timescales and budgets and to a high standard of engineering Create, analyses and document solutions traceable to the customer, business and solution requirements in accordance with processes and system engineering methodologies. This involves generating system architecture designs, functional designs, interfaces specifications, statements of work, integration and test strategies and any relevant systems engineering artefacts Lead the integration, verification, validation, and qualification planning and definition activities, and lead and participate in those activities as required Produce detailed Systems Engineering estimates and technical specifications (SOW) for proposals and budgeting purposes Provide input regarding systems engineering tasks to project planners and plans Work collaboratively with other management and engineering disciplines to ensure project objectives are met Prepare and present systems proposals to customers and provide technical support to sales and marketing activity Report to management on Systems Engineering performance against specification, budget, timescale and quality requirements, to identify deviations from plan and carry out corrective action Evaluate design, development and integration executed by subcontractors against requirements Participate in formal meetings with customers and subcontractors and to travel to customers' sites to perform or supervise activities Keep up to date on the latest developments in systems engineering, computers, microprocessors, communications systems and software techniques relevant to the company's operation Develop and promote quality engineering practices in the department and support Systems Engineering process improvement projects and promotion of quality engineering practices in the department Train, coach and mentor less-experienced members of the department in order to foster their career development Travel domestically or internationally as required to meet the needs of any given project Comply with values and adherence to all company policy and procedures. Comply with the code of conduct, quality, security and occupational health, safety and environmental policies and procedures. In addition to the duties and responsibilities listed, the job holder is required to perform other duties assigned by their manager from time-to-time, as may be reasonably required of them. Minimum Job Requirements: Skills knowledge and experience: Essential: Demonstrable experience in: o requirements analysis preferably using a formal requirements management tool o system definition, design and control o solution integration, verification and validation o systems engineering methodologies Proven track record of providing technical expertise on complex integration projects Stakeholder/customer management experience Aware of software development best practice and able to apply standards and procedures effectively Ability to create high quality documentation and presentation skills Desirable: Experience in ticketing and automated fare collection, or similar applications involving large networks of unattended/passenger-operated devices Demonstrable knowledge of implementing the certification requirements of systems and devices in accordance to Payment Card Industry (PCI) standards Experience of requirements management, ideally using the DOORS product Tool driven system design using UML and Enterprise Architect or another structured methodology Implementation and deployment knowledge from Windows and UNIX environments Knowledge of financial and regulatory practices within business. Education and qualifications Essential: Engineering Degree in relevant discipline or equivalent qualification/experience Demonstrable and solid experience as a system engineer on complex integration projects Desirable: Master's Degree in a relevant discipline or equivalent qualification/experience INCOSE certification ITIL certification
JOB: Working across an Assets and Connections Portfolio, the successful candidate will be responsible for producing and assuring high quality electrical and circuit designs to an agreed scope. Designs to be delivered to cost, time and quality targets. All designs must meet design and CDM standards. These designs could be for APP and/or Connections (non-contestable and contestable) work. The successful candidate will be expected to work as part of a multi-disciplinary team, delivering design technical excellence by ensuring compliance to design, CDM and relevant standards for the regulated network solutions for all APP and Connection schemes. ACCOUNTABILITIES: Production of Electrical Designs and circuit designs (below ground and in air) that can be constructed in compliance with standards and CDM requirements with no supervision and assure others designs. Deliver effective designs, which conform to all relevant Codes of Practice and company and industry standards, in conjunction with Electrical Design. Contribute to the production of technical, commercial and contractual documents for procurement of engineering products. Ensure compliance with all relevant legislation, regulations, and company procedures. Compliance with design assurance and audit processes Preparation of concept and developed design, from specifications and drawings within defined periods. Provide an excellent service to the customer. Work as a Team Player within larger multi-disciplinary teams. Liaise with the operational teams to ensure a smooth process from initial enquiry through to final energisation and project closure. Complying with the requirements of the designer/principal designer as determined by the 2015 CDM Regulations. Ensure design eliminates any hazards which may give rise to risks; and reduce risks from any remaining hazards (in conjunction with CDM). Ensure solutions provide sufficient information about aspects of the design of the network, its construction and maintenance as will adequately assist clients, the CDM team, other designers, and contractors. Supporting and mentoring other members of the team to enhance their technical knowledge and experience. SKILLS, QUALIFICATIONS AND EXPERIENCE: Strong Electrical engineering background and experience in electrical engineering. Knowledge of power system and protection design at 132KV, 33KV, 11KV, and intermediate voltages. Electrical/Circuit Engineering degree or STEM equivalent with proven relevant Electrical/Cable/OHL and substation design experience. Circuit engineering background and extensive experience in EHV circuit design and construction works, ideally within Utility sector. Competence in resolving circuit network issues and ability to provide a sound understanding of company standards and policies and their application to this role. Awareness of current and technological developments in circuit engineering. Extensive Knowledge of design processes and relevant DNO, ENA and International Design Standards including relevant operational aspects to successfully deliver designs. Ability to work with external engineering organisations and customers/stakeholders representing UKPN to best effect. Capable to sign off the designs. A good safety culture and sound understanding of Construction Design and Management (CDM) Regulations and their application in this role. Ability to work unsupervised, set and comply with own targets, and identify and implement innovative cost saving solutions. Good team working skills. A good level of business, environmental, safety, financial, and regulatory awareness. A general appreciation of financial reporting systems. Knowledge of the ISO 9001:2000 and ISO 14001 procedures relevant to the team's activities. Manage (not line manage) and communicate with the CAD team to produce design drawings suitable for construction. Experience of undertaking cable sizing/rating calculations for 11kV up to 132kV networks, for both solidly and cross bonded circuits (including de-rating aspects and short circuit loadings). Experience of undertaking cable pulling calculations for 11kV up to 132kV networks, in line with company standards. Experience in designing joint/pulling bays from 11kV up to 132kV. Experience in designing pilot/fibre cable routes, including splice chambers. Experience in terminations to indoor/outdoor switchgear/cable sealing ends. Experience in route proving, to determine the most cost effective and safest route install. Experience of directional drills and ability to advise/assure requirements accordingly. Excellent communication and organizational skills required, especially in relation to dealing with survey companies to obtain utility search information. Experience with producing Bills of Materials, particularly cable drum lengths, in coordination with pulling calculations. Liaise with Wayleaves and Consents to determine most feasible route. Knowledge of project management. Proficient in the use of Microsoft desktop applications, in particular: Word, Excel, and PowerPoint. Strong interpersonal skills and be competent in written and oral communications. Proficient in the use of AutoCAD and or Micro station. Awareness of current and technological developments in distribution plant and equipment. Input into innovative construction ideas and techniques, which feed into UK Power Networks Green Action Plan. Chartered Engineer or working towards achieving Chartership. PACKAGE: £70,000 - £78,132 - + car + London Allowance + bonus + benefit Annual Leave Personal Pension Plan - Personal contribution rates of 4% or 5% (UK Power Networks will make a corresponding contribution of 8% or 10%) Tenancy Loan Deposit scheme Tax efficient benefits: cycle to work scheme Season ticket loan Occupational Health support Switched On - scheme providing discount on hundreds of retailers products. Discounted access to sports and social clubs Employee Assistance Programme
03/05/2024
Full time
JOB: Working across an Assets and Connections Portfolio, the successful candidate will be responsible for producing and assuring high quality electrical and circuit designs to an agreed scope. Designs to be delivered to cost, time and quality targets. All designs must meet design and CDM standards. These designs could be for APP and/or Connections (non-contestable and contestable) work. The successful candidate will be expected to work as part of a multi-disciplinary team, delivering design technical excellence by ensuring compliance to design, CDM and relevant standards for the regulated network solutions for all APP and Connection schemes. ACCOUNTABILITIES: Production of Electrical Designs and circuit designs (below ground and in air) that can be constructed in compliance with standards and CDM requirements with no supervision and assure others designs. Deliver effective designs, which conform to all relevant Codes of Practice and company and industry standards, in conjunction with Electrical Design. Contribute to the production of technical, commercial and contractual documents for procurement of engineering products. Ensure compliance with all relevant legislation, regulations, and company procedures. Compliance with design assurance and audit processes Preparation of concept and developed design, from specifications and drawings within defined periods. Provide an excellent service to the customer. Work as a Team Player within larger multi-disciplinary teams. Liaise with the operational teams to ensure a smooth process from initial enquiry through to final energisation and project closure. Complying with the requirements of the designer/principal designer as determined by the 2015 CDM Regulations. Ensure design eliminates any hazards which may give rise to risks; and reduce risks from any remaining hazards (in conjunction with CDM). Ensure solutions provide sufficient information about aspects of the design of the network, its construction and maintenance as will adequately assist clients, the CDM team, other designers, and contractors. Supporting and mentoring other members of the team to enhance their technical knowledge and experience. SKILLS, QUALIFICATIONS AND EXPERIENCE: Strong Electrical engineering background and experience in electrical engineering. Knowledge of power system and protection design at 132KV, 33KV, 11KV, and intermediate voltages. Electrical/Circuit Engineering degree or STEM equivalent with proven relevant Electrical/Cable/OHL and substation design experience. Circuit engineering background and extensive experience in EHV circuit design and construction works, ideally within Utility sector. Competence in resolving circuit network issues and ability to provide a sound understanding of company standards and policies and their application to this role. Awareness of current and technological developments in circuit engineering. Extensive Knowledge of design processes and relevant DNO, ENA and International Design Standards including relevant operational aspects to successfully deliver designs. Ability to work with external engineering organisations and customers/stakeholders representing UKPN to best effect. Capable to sign off the designs. A good safety culture and sound understanding of Construction Design and Management (CDM) Regulations and their application in this role. Ability to work unsupervised, set and comply with own targets, and identify and implement innovative cost saving solutions. Good team working skills. A good level of business, environmental, safety, financial, and regulatory awareness. A general appreciation of financial reporting systems. Knowledge of the ISO 9001:2000 and ISO 14001 procedures relevant to the team's activities. Manage (not line manage) and communicate with the CAD team to produce design drawings suitable for construction. Experience of undertaking cable sizing/rating calculations for 11kV up to 132kV networks, for both solidly and cross bonded circuits (including de-rating aspects and short circuit loadings). Experience of undertaking cable pulling calculations for 11kV up to 132kV networks, in line with company standards. Experience in designing joint/pulling bays from 11kV up to 132kV. Experience in designing pilot/fibre cable routes, including splice chambers. Experience in terminations to indoor/outdoor switchgear/cable sealing ends. Experience in route proving, to determine the most cost effective and safest route install. Experience of directional drills and ability to advise/assure requirements accordingly. Excellent communication and organizational skills required, especially in relation to dealing with survey companies to obtain utility search information. Experience with producing Bills of Materials, particularly cable drum lengths, in coordination with pulling calculations. Liaise with Wayleaves and Consents to determine most feasible route. Knowledge of project management. Proficient in the use of Microsoft desktop applications, in particular: Word, Excel, and PowerPoint. Strong interpersonal skills and be competent in written and oral communications. Proficient in the use of AutoCAD and or Micro station. Awareness of current and technological developments in distribution plant and equipment. Input into innovative construction ideas and techniques, which feed into UK Power Networks Green Action Plan. Chartered Engineer or working towards achieving Chartership. PACKAGE: £70,000 - £78,132 - + car + London Allowance + bonus + benefit Annual Leave Personal Pension Plan - Personal contribution rates of 4% or 5% (UK Power Networks will make a corresponding contribution of 8% or 10%) Tenancy Loan Deposit scheme Tax efficient benefits: cycle to work scheme Season ticket loan Occupational Health support Switched On - scheme providing discount on hundreds of retailers products. Discounted access to sports and social clubs Employee Assistance Programme
Electronics CAD Engineer - Safety Technology (Contract) CPS Group is seeking an Electronics CAD Engineer to join our esteemed global client based in Kent on an initial 3 - 4+ month contract, outside IR35. There is potential that this contract will be extended to 6 months. Industry: Safety Technology Location: Kent (On-site 4 days per week) Contract Length: Initially 3 - 4 months (Extensions likely and expected) Start: Immediate IR35 Status: Outside IR35 Rate: Flexible (£35 - £40 per hour +) Responsibilities: Collaborate closely with our client's team to develop and implement electronic solutions in the realm of safety technology. Engage in data Front End entry tasks involving symbols, footprints, and data sheets, ensuring accuracy and completeness. Utilize Altium CAD packages or similar Electronic CAD software proficiently to design and modify electronic components and systems. Conduct thorough checks and verifications of completed work, reporting findings promptly and accurately. Adapt to evolving project requirements and contribute proactively to process improvements. Requirements: Background in electronics with demonstrable experience working with electrical components. Proficiency in Altium CAD packages or similar Electronic CAD software. Familiarity with ERP (Enterprise Resource Planning) or PLM (Product Lifecycle Management) systems is advantageous. Strong attention to detail and a commitment to delivering high-quality work within deadlines. Excellent communication skills and the ability to collaborate effectively within a team environment. Flexibility to work on-site 4 days per week initially, transitioning to 2 days WFH once fully acclimatized with systems and processes. This role offers an exciting opportunity to contribute to cutting-edge safety technology projects and be a pivotal part of our client's dynamic team. Electronics CAD Engineer - Safety Technology (Contract) By applying to this advert you are giving CPS Group (UK) Ltd authority to hold and process your data for this specific role and any other roles we may deem suitable to you over time. We will not pass your data to any third party without your verbal or written permission to do so. All incoming and outgoing calls are recorded for training and compliance purposes. CPS Group (UK) Ltd is acting as an Employment Agency in relation to this vacancy. Our new privacy policy can be found on our website
03/05/2024
Project-based
Electronics CAD Engineer - Safety Technology (Contract) CPS Group is seeking an Electronics CAD Engineer to join our esteemed global client based in Kent on an initial 3 - 4+ month contract, outside IR35. There is potential that this contract will be extended to 6 months. Industry: Safety Technology Location: Kent (On-site 4 days per week) Contract Length: Initially 3 - 4 months (Extensions likely and expected) Start: Immediate IR35 Status: Outside IR35 Rate: Flexible (£35 - £40 per hour +) Responsibilities: Collaborate closely with our client's team to develop and implement electronic solutions in the realm of safety technology. Engage in data Front End entry tasks involving symbols, footprints, and data sheets, ensuring accuracy and completeness. Utilize Altium CAD packages or similar Electronic CAD software proficiently to design and modify electronic components and systems. Conduct thorough checks and verifications of completed work, reporting findings promptly and accurately. Adapt to evolving project requirements and contribute proactively to process improvements. Requirements: Background in electronics with demonstrable experience working with electrical components. Proficiency in Altium CAD packages or similar Electronic CAD software. Familiarity with ERP (Enterprise Resource Planning) or PLM (Product Lifecycle Management) systems is advantageous. Strong attention to detail and a commitment to delivering high-quality work within deadlines. Excellent communication skills and the ability to collaborate effectively within a team environment. Flexibility to work on-site 4 days per week initially, transitioning to 2 days WFH once fully acclimatized with systems and processes. This role offers an exciting opportunity to contribute to cutting-edge safety technology projects and be a pivotal part of our client's dynamic team. Electronics CAD Engineer - Safety Technology (Contract) By applying to this advert you are giving CPS Group (UK) Ltd authority to hold and process your data for this specific role and any other roles we may deem suitable to you over time. We will not pass your data to any third party without your verbal or written permission to do so. All incoming and outgoing calls are recorded for training and compliance purposes. CPS Group (UK) Ltd is acting as an Employment Agency in relation to this vacancy. Our new privacy policy can be found on our website
SECURITY CLEARED - SENIOR NUCLEAR PROCESS ENGINEER Plymouth - Mostly REMOTE - onsite only when required Up to £60 per hour With a rich history of innovation and a global footprint, looking for a SECURITY CLEARED SENIOR NUCLEAR SAFETY PROCESS ENGINEER , this influential organization continues to shape industries and maintaining a steadfast commitment to excellence in engineering and support services. Championing innovation, it boldly steers the course towards a forward-looking future. Oversee the execution of nuclear processes, taking charge of the technical facets. Lead and supervise the development of one or more technical design packages, aligning with nuclear safety process objectives. Verify that the design documentation comprehensively addresses the scope of operations. You'll be a successful candidate if you have: Active SECURITY CLEARANCE (SC). Degree or equivalent in a Chemical Engineering. Design and substantiation of Process Engineering related to Nuclear Safety Functions . Familiarity with construction methods utilized for process systems related to Nuclear Safety. Knowledge of process design of large-scale industrial plant. With a Legacy of impactful contributions, it remains a pivotal force in engineering and support services on an international scale. If you are looking for to be a part of such a pioneering company, then this role is for you. * PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role.
01/05/2024
Project-based
SECURITY CLEARED - SENIOR NUCLEAR PROCESS ENGINEER Plymouth - Mostly REMOTE - onsite only when required Up to £60 per hour With a rich history of innovation and a global footprint, looking for a SECURITY CLEARED SENIOR NUCLEAR SAFETY PROCESS ENGINEER , this influential organization continues to shape industries and maintaining a steadfast commitment to excellence in engineering and support services. Championing innovation, it boldly steers the course towards a forward-looking future. Oversee the execution of nuclear processes, taking charge of the technical facets. Lead and supervise the development of one or more technical design packages, aligning with nuclear safety process objectives. Verify that the design documentation comprehensively addresses the scope of operations. You'll be a successful candidate if you have: Active SECURITY CLEARANCE (SC). Degree or equivalent in a Chemical Engineering. Design and substantiation of Process Engineering related to Nuclear Safety Functions . Familiarity with construction methods utilized for process systems related to Nuclear Safety. Knowledge of process design of large-scale industrial plant. With a Legacy of impactful contributions, it remains a pivotal force in engineering and support services on an international scale. If you are looking for to be a part of such a pioneering company, then this role is for you. * PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role.
SECURITY CLEARED - SENIOR NUCLEAR PROCESS ENGINEER Plymouth - Hybrid Up to £60 per hour With a rich history of innovation and a global footprint, looking for a SECURITY CLEARED SENIOR NUCLEAR SAFETY PROCESS ENGINEER , this influential organization continues to shape industries and maintaining a steadfast commitment to excellence in engineering and support services. Championing innovation, it boldly steers the course towards a forward-looking future. Oversee the execution of nuclear processes, taking charge of the technical facets. Lead and supervise the development of one or more technical design packages, aligning with nuclear safety process objectives. Verify that the design documentation comprehensively addresses the scope of operations. You'll be a successful candidate if you have: Active SECURITY CLEARANCE (SC). Degree or equivalent in a Chemical Engineering. Design and substantiation of Process Engineering related to Nuclear Safety Functions . Familiarity with construction methods utilized for process systems related to Nuclear Safety. Knowledge of process design of large-scale industrial plant. With a Legacy of impactful contributions, it remains a pivotal force in engineering and support services on an international scale. If you are looking for to be a part of such a pioneering company, then this role is for you. * PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role.
01/05/2024
Project-based
SECURITY CLEARED - SENIOR NUCLEAR PROCESS ENGINEER Plymouth - Hybrid Up to £60 per hour With a rich history of innovation and a global footprint, looking for a SECURITY CLEARED SENIOR NUCLEAR SAFETY PROCESS ENGINEER , this influential organization continues to shape industries and maintaining a steadfast commitment to excellence in engineering and support services. Championing innovation, it boldly steers the course towards a forward-looking future. Oversee the execution of nuclear processes, taking charge of the technical facets. Lead and supervise the development of one or more technical design packages, aligning with nuclear safety process objectives. Verify that the design documentation comprehensively addresses the scope of operations. You'll be a successful candidate if you have: Active SECURITY CLEARANCE (SC). Degree or equivalent in a Chemical Engineering. Design and substantiation of Process Engineering related to Nuclear Safety Functions . Familiarity with construction methods utilized for process systems related to Nuclear Safety. Knowledge of process design of large-scale industrial plant. With a Legacy of impactful contributions, it remains a pivotal force in engineering and support services on an international scale. If you are looking for to be a part of such a pioneering company, then this role is for you. * PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role.
Ideal location - East London Salary - £25000 - £27000 Hours: Monday to Friday, pick up kit by 08:30 as local PUDO working on client site up till 17:30, overtime available Benefits: medium size van + Parking cards and Fuel cards + Pension Start date - ASAP We have an exciting opportunity for a field service engineer to join a blue chip organisation on a permanent basis in East London. * Travel between a wide variety of customer sites to provide IT Support Services to meet contractual requirements * Provide support services for a range of IT equipment including but not limited to PCs, laptops, tablets, printers, peripherals and point of sales systems * Perform on site installations and troubleshooting on a wide range of products in a software or hardware environment * Obtain/maintain a set of vendor certifications as required to perform the role * Follow documented procedures and provide constructive feedback for continuous improvement * Always adhere to safety and electric static discharge (ESD) precautions * Complete all relevant documentation and provide quality updates as required for each site visit in timely manner as set out * Participate in the on-call rota which includes mornings, evenings and weekends (on call allowances apply) * Providing support services into the wider teams within the Integrated Technology Solutions department * Demonstrate flexibility to work overtime to meet the contractual needs of the client, when necessary. Overtime rates apply Qualifications Skills and Experience * Experience with installing, troubleshooting, and fixing a variety of hardware devices including end user computing, PCs, laptops, tablets, printer & peripherals * Ability to install and configure software as per customer requirements * Hold relevant and current vendor certifications such as Dell, Lenovo, IBM & HP * Good all-round understanding of hardware maintenance/break-fix * Hold a full UK Driving Licence * Essential to obtain/hold UK security clearances such as SC and NPPV3 as required to attend external and varied customer base * Quality focused with excellent attention to detail * Capable of working independently and remotely on a wide range of products * Methodical and quality-minded with a right-first time approach to all work but able to recognise when to request support * Passionate, professional, with a 'can-do' attitude who works on own initiative or as a team towards agreed common goals. * Results-oriented with a track record of success for achieving and exceeding goals * Physical strength and dexterity to carry IT equipment and work in awkward or tight spaces * MUST be able to obtain security clearances, BPSS & SC, (NPPV3 great to have but not essential) * Hardware Break fix experience * Would suit an ambitions engineer wanting to get a foot on the ladder of Field services break fix (chance to train up and become a Senior Engineer) * Driving is a big part of the job - Full UK Manual Driving licence required "In applying for this position, you consent to your personal data being shared with the specified employer and for your details to remain with GTS for as long as is necessary to process your application. See our Privacy Notice for full information Global Technology Solutions is acting as an Employment Agency in relation to this vacancy.
01/05/2024
Full time
Ideal location - East London Salary - £25000 - £27000 Hours: Monday to Friday, pick up kit by 08:30 as local PUDO working on client site up till 17:30, overtime available Benefits: medium size van + Parking cards and Fuel cards + Pension Start date - ASAP We have an exciting opportunity for a field service engineer to join a blue chip organisation on a permanent basis in East London. * Travel between a wide variety of customer sites to provide IT Support Services to meet contractual requirements * Provide support services for a range of IT equipment including but not limited to PCs, laptops, tablets, printers, peripherals and point of sales systems * Perform on site installations and troubleshooting on a wide range of products in a software or hardware environment * Obtain/maintain a set of vendor certifications as required to perform the role * Follow documented procedures and provide constructive feedback for continuous improvement * Always adhere to safety and electric static discharge (ESD) precautions * Complete all relevant documentation and provide quality updates as required for each site visit in timely manner as set out * Participate in the on-call rota which includes mornings, evenings and weekends (on call allowances apply) * Providing support services into the wider teams within the Integrated Technology Solutions department * Demonstrate flexibility to work overtime to meet the contractual needs of the client, when necessary. Overtime rates apply Qualifications Skills and Experience * Experience with installing, troubleshooting, and fixing a variety of hardware devices including end user computing, PCs, laptops, tablets, printer & peripherals * Ability to install and configure software as per customer requirements * Hold relevant and current vendor certifications such as Dell, Lenovo, IBM & HP * Good all-round understanding of hardware maintenance/break-fix * Hold a full UK Driving Licence * Essential to obtain/hold UK security clearances such as SC and NPPV3 as required to attend external and varied customer base * Quality focused with excellent attention to detail * Capable of working independently and remotely on a wide range of products * Methodical and quality-minded with a right-first time approach to all work but able to recognise when to request support * Passionate, professional, with a 'can-do' attitude who works on own initiative or as a team towards agreed common goals. * Results-oriented with a track record of success for achieving and exceeding goals * Physical strength and dexterity to carry IT equipment and work in awkward or tight spaces * MUST be able to obtain security clearances, BPSS & SC, (NPPV3 great to have but not essential) * Hardware Break fix experience * Would suit an ambitions engineer wanting to get a foot on the ladder of Field services break fix (chance to train up and become a Senior Engineer) * Driving is a big part of the job - Full UK Manual Driving licence required "In applying for this position, you consent to your personal data being shared with the specified employer and for your details to remain with GTS for as long as is necessary to process your application. See our Privacy Notice for full information Global Technology Solutions is acting as an Employment Agency in relation to this vacancy.
An Electrical/Electronic Engineer is required for a contract assignment with a multi-national leading defence company. Missile Architecture - Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support. It's an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: a) Specifying/determining * system electrical requirements * interface definitions and characteristics between subsystems/equipment * power architecture, including power budget and power profiles * data communication and processing architecture * requirements for EMC, bonding, grounding and screening * signal safety, including routing of safety related signals b) Supporting test and fault-finding activities during compatibility checks, risk reduction, system proving/qualification and integration c) Reviewing and authoring reports, guidelines and processes d) Design assessments and analysis e) Working to defence/industry standards f) Attending and supporting design reviews Alternatively, acting as the Equipment Manager (RMO) for specific electrical/electronic equipment(s) that are part of a missile or launcher system you will: a) Project manage the equipment(s) on behalf of the project during development, qualification and manufacture b) Own the requirements on behalf of the project for the equipment(s) c) Produce Statement(s) of Work for the associated design authority for the equipment(s) d) Create and update plans showing activities for the equipment(s) e) Manage internal & external design authorities for delivery of the equipment(s) hardware, software and deliverables to schedule, cost, quality and performance f) Hold regular progress reviews with the design authority for the equipment(s) g) Review qualification verification evidence h) Track and find resolution to equipment non-compliances i) Attend and support design reviews Skillset/experience required: Technical experience required: * electrical/electronics * interface definitions * knowledge of defence/industry standards, etc. * degree level qualification in a related subject * systems engineering * writing reports Ideally this would be within a defence related background, however, experience within other engineering industries will also be considered. Experience within these other areas are also of interest but not essential: * defence * weapon systems * power supplies * actuators * data communication * sensors * EMC * Health Usage Monitoring Systems (HUMS) * Model Based Engineering (MBE) Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
01/05/2024
Project-based
An Electrical/Electronic Engineer is required for a contract assignment with a multi-national leading defence company. Missile Architecture - Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support. It's an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: a) Specifying/determining * system electrical requirements * interface definitions and characteristics between subsystems/equipment * power architecture, including power budget and power profiles * data communication and processing architecture * requirements for EMC, bonding, grounding and screening * signal safety, including routing of safety related signals b) Supporting test and fault-finding activities during compatibility checks, risk reduction, system proving/qualification and integration c) Reviewing and authoring reports, guidelines and processes d) Design assessments and analysis e) Working to defence/industry standards f) Attending and supporting design reviews Alternatively, acting as the Equipment Manager (RMO) for specific electrical/electronic equipment(s) that are part of a missile or launcher system you will: a) Project manage the equipment(s) on behalf of the project during development, qualification and manufacture b) Own the requirements on behalf of the project for the equipment(s) c) Produce Statement(s) of Work for the associated design authority for the equipment(s) d) Create and update plans showing activities for the equipment(s) e) Manage internal & external design authorities for delivery of the equipment(s) hardware, software and deliverables to schedule, cost, quality and performance f) Hold regular progress reviews with the design authority for the equipment(s) g) Review qualification verification evidence h) Track and find resolution to equipment non-compliances i) Attend and support design reviews Skillset/experience required: Technical experience required: * electrical/electronics * interface definitions * knowledge of defence/industry standards, etc. * degree level qualification in a related subject * systems engineering * writing reports Ideally this would be within a defence related background, however, experience within other engineering industries will also be considered. Experience within these other areas are also of interest but not essential: * defence * weapon systems * power supplies * actuators * data communication * sensors * EMC * Health Usage Monitoring Systems (HUMS) * Model Based Engineering (MBE) Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
Senior Electrical Engineer - Hybrid - Stafford VIQU has partnered with a leading consultancy who deliver critical projects in energy, water, renewables, and manufacturing, with this role being part of the Energy team. Our client is recruiting for a Senior Electrical Engineer to oversee the full E, C & I design and implementation life cycle. The successful Senior Electrical Engineer will work on projects primarily within thermal and hydro power generation. Please note that this is a hybrid role, with 3 days per week required onsite in Stafford. Key skills & responsibilities for the Senior Electrical Engineer: Strong background within Electrical Engineering and E & I Installations Oversee full life cycle design process this includes: Creating designs from customer supplied specifications Supporting Site Acceptance Testing/Commissioning phase Experience within: Control systems within energy/utilities sector Control panel design build Field cabling systems AutoCAD Electrical Documentation to support project delivery (eg Functional Design Specification (FDS), Test Documentation, Manuals etc.) Site surveys, prep Health & Safety documentation Strong communication skills Experience with one of the following would be desirable: Rockwell (ControlLogix) Siemens (PC7S TIA Portal) Schneider (M580 M340) Role details: Job role: Senior Electrical Engineer Job type: Contract Duration: 12 months' contract Rate: £50 - £55 per hour IR35 status: Inside IR35 Location: Hybrid - Stafford To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Suzie Stone , by exploring the VIQU IT Recruitment website .
30/04/2024
Project-based
Senior Electrical Engineer - Hybrid - Stafford VIQU has partnered with a leading consultancy who deliver critical projects in energy, water, renewables, and manufacturing, with this role being part of the Energy team. Our client is recruiting for a Senior Electrical Engineer to oversee the full E, C & I design and implementation life cycle. The successful Senior Electrical Engineer will work on projects primarily within thermal and hydro power generation. Please note that this is a hybrid role, with 3 days per week required onsite in Stafford. Key skills & responsibilities for the Senior Electrical Engineer: Strong background within Electrical Engineering and E & I Installations Oversee full life cycle design process this includes: Creating designs from customer supplied specifications Supporting Site Acceptance Testing/Commissioning phase Experience within: Control systems within energy/utilities sector Control panel design build Field cabling systems AutoCAD Electrical Documentation to support project delivery (eg Functional Design Specification (FDS), Test Documentation, Manuals etc.) Site surveys, prep Health & Safety documentation Strong communication skills Experience with one of the following would be desirable: Rockwell (ControlLogix) Siemens (PC7S TIA Portal) Schneider (M580 M340) Role details: Job role: Senior Electrical Engineer Job type: Contract Duration: 12 months' contract Rate: £50 - £55 per hour IR35 status: Inside IR35 Location: Hybrid - Stafford To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Suzie Stone , by exploring the VIQU IT Recruitment website .
Lead Electrical Engineer - Inside IR35 - €750 per day! We are recruiting an Electrical Engineer for a project in County Clare, Ireland, which is expected to run until the end of February 2026. Our client is in the process of transitioning a power station's primary fuel from coal to heavy fuel oil. The works require the construction of two new heavy fuel oil tanks, new auxiliary boilers, new ash injection system, upgrade of the existing HFO Systems, ancillary systems and modifications to the existing site infrastructure. As an Electrical Engineer you will be tasked to manage the key responsibilities which are listed below: - Perform role of lead electrical engineer and be responsible for the electrical engineering works on site for the successful delivery of the emergency generation projects. Manage Site teams (as required), and liaison with Station Electrical and Instrumentation (E&I) teams. Liaise with Control & Instrumentation, Mechanical and Civil design teams to ensure delivery co-ordination on multi-disciplinary projects. Ensure that electrical systems are installed, tested, and operated safely and efficiently in accordance with regulations, standards, and guidelines. Co-ordinate electrical testing and commissioning activities on Low Voltage (LV), Medium Voltage (MV) and High Voltage (HV) systems and provide advice on testing and commissioning procedures and documentation. Support the management of projects from installation, commissioning, and handover. Support the team of electrical engineers delivering engineering design and support services for generating technologies. Support for the Safety Systems at site and apply a high level of safety standards in every aspect of the work. Skills and Experience Proven track record of significant experience in the power generation industry. A minimum of 7 years' relevant experience is required. Design, and Construction or Commissioning experience, is preferred. Extensive knowledge of electrical equipment utilised in power plant projects, preferably including LV and MV Proven ability to deliver on the key responsibilities outlined above. A proven track record in delivering complex engineering projects and ability to manage multiple projects. Experience of Project Management tools would be an advantage. Working knowledge of Health, Safety and Environment Standards, and Electrical Safety procedures An EU/British passport will be required for this role, as the role requires onsite working Monday to Friday. The daily rate on offer is €750 all-inclusive (no expenses). Further information is available upon request.
30/04/2024
Project-based
Lead Electrical Engineer - Inside IR35 - €750 per day! We are recruiting an Electrical Engineer for a project in County Clare, Ireland, which is expected to run until the end of February 2026. Our client is in the process of transitioning a power station's primary fuel from coal to heavy fuel oil. The works require the construction of two new heavy fuel oil tanks, new auxiliary boilers, new ash injection system, upgrade of the existing HFO Systems, ancillary systems and modifications to the existing site infrastructure. As an Electrical Engineer you will be tasked to manage the key responsibilities which are listed below: - Perform role of lead electrical engineer and be responsible for the electrical engineering works on site for the successful delivery of the emergency generation projects. Manage Site teams (as required), and liaison with Station Electrical and Instrumentation (E&I) teams. Liaise with Control & Instrumentation, Mechanical and Civil design teams to ensure delivery co-ordination on multi-disciplinary projects. Ensure that electrical systems are installed, tested, and operated safely and efficiently in accordance with regulations, standards, and guidelines. Co-ordinate electrical testing and commissioning activities on Low Voltage (LV), Medium Voltage (MV) and High Voltage (HV) systems and provide advice on testing and commissioning procedures and documentation. Support the management of projects from installation, commissioning, and handover. Support the team of electrical engineers delivering engineering design and support services for generating technologies. Support for the Safety Systems at site and apply a high level of safety standards in every aspect of the work. Skills and Experience Proven track record of significant experience in the power generation industry. A minimum of 7 years' relevant experience is required. Design, and Construction or Commissioning experience, is preferred. Extensive knowledge of electrical equipment utilised in power plant projects, preferably including LV and MV Proven ability to deliver on the key responsibilities outlined above. A proven track record in delivering complex engineering projects and ability to manage multiple projects. Experience of Project Management tools would be an advantage. Working knowledge of Health, Safety and Environment Standards, and Electrical Safety procedures An EU/British passport will be required for this role, as the role requires onsite working Monday to Friday. The daily rate on offer is €750 all-inclusive (no expenses). Further information is available upon request.
Ideal location - Essex Salary - £27000 - 29000 Hours: Monday to Friday, pick up kit by 08:30 as local PUDO working on client site up till 17:30, overtime available Benefits: Car + Parking cards and Fuel cards + Pension + on call payment Start date - ASAP We have an exciting opportunity for a senior field service engineer to join a blue chip organisation on a permanent basis in Essex. Senior Field Service Engineer will be required to fault find and repair a variety of IT equipment including Servers, PCs, Laptop, printer and point of sales systems (EPOS) at various Customer locations across the UK. Ensuring company processes, procedures and contractual requirements are followed whilst maintaining high levels of customer service. You must be an experienced time served "Field Service Engineer", a confident communicator at all levels and work well as part of a team. The position will report into Team Leader/Resource Managers (Field) but will also have critical relationships with Call Control and Technical vetting teams with Field Services. The role will involve: * Capable of working independently and remotely, required to perform on site troubleshooting on a wide range of products in a software or hardware environment. * Proficient in the installation, configuration and support of Server/Desktop/EPOS environment and in addition, be able to connect and install client software for various networking platforms at various customer locations in the UK. * Ability to follow documented procedures and adhere to safety and ESD precautions at all times. * Be able to demonstrate strong problem solving techniques with the ability to adapt and learn on the job. * Develop, grow and maintain professional working relationships with all internal stakeholders Call Control, Tech Vetting teams. * Ensure process, procedural and contractual agreements are being followed correctly. * Endeavour to provide all customers with the best level of customer service and support. * Complete documentation including Field Service Call reports and Customer Checksheets and ensure these are returned within SLA timescales. * Work proactively with call allocators to ensure SLA's are met in the most economic way. * Have a solid understanding of customers SLA requirement and use initiative to ensure the expectation is met and exceeded * Any additional activity as directed by Senior Management Key Experience * Have an excellent working knowledge of Server/PC architecture, knowledge of Windows Operating systems, break fix and troubleshooting of Servers, Desktops, EPOS, Laptops, and Printers. * Manufacturer recognised accreditations, ie HP/IBM/Dell. Both Server and Desktop. * At least 6 years customer facing IT industry experience. * Capable of working independently on a wide range of products. * Excellent communication skills. * Excellent proven organisational and customer service skills. * Able to work under pressure. * Able to maintain a consistent high standard of quality and professionalism. * Excellent Time management skills. * Team Player - ability to work as part of the team to deliver operational excellence. * Awareness of ITIL methodologies and best practice. * Previous employment in a similar role. * Ability to show flexibility to help the changing needs of the team. * Adhere to company standards and procedures at all times unless otherwise directed. * Maintain excellent customer relationships. * Maintain high levels of Punctuality, Communication, Attitude, Competence and Quality of Service * Maintain all appropriate Manufacturer Server Accreditations where app Senior Engineer main skills * MUST be able to obtain security clearances, BPSS & SC, (NPPV3 great to have but not essential) * X86 Server Hardware break fix Skills (can replace all components, upgrade Bios/firmware) * Laptop Hardware break fix skills (replace all components) * Must be able to hold Main vendor certifications on Servers & Laptops (Dell, HP, Lenovo) * Will form part of an on call rota covering 24*7*365 call outs Senior Engineer good to have experience/skills * Netapp - major advantage to hold this * Retail/Point of Sale (POS) Personal Attribute * Highly enthusiastic, approachable and self motivated to achieve targets. * Ability to prioritise workload effectively. * A Methodical and accurate approach to the job is critical. * Team focused - a genuine passion to deliver excellence through continuous development and improvement. * Be able to remain positive at all times and influence those around you. * Excellent communicator who can remain objective and focussed with Customers and Internal Agencies alike. * Good relationship management skills. * Previous Senior Field Engineer experience desirable. * Analytical, with exceptional attention to detail. * Innovative thinking, in terms of service quality and improvements * Full UK Driving Licence. "In applying for this position, you consent to your personal data being shared with the specified employer and for your details to remain with GTS for as long as is necessary to process your application. See our Privacy Notice for full information Global Technology Solutions is acting as an Employment Agency in relation to this vacancy.
30/04/2024
Full time
Ideal location - Essex Salary - £27000 - 29000 Hours: Monday to Friday, pick up kit by 08:30 as local PUDO working on client site up till 17:30, overtime available Benefits: Car + Parking cards and Fuel cards + Pension + on call payment Start date - ASAP We have an exciting opportunity for a senior field service engineer to join a blue chip organisation on a permanent basis in Essex. Senior Field Service Engineer will be required to fault find and repair a variety of IT equipment including Servers, PCs, Laptop, printer and point of sales systems (EPOS) at various Customer locations across the UK. Ensuring company processes, procedures and contractual requirements are followed whilst maintaining high levels of customer service. You must be an experienced time served "Field Service Engineer", a confident communicator at all levels and work well as part of a team. The position will report into Team Leader/Resource Managers (Field) but will also have critical relationships with Call Control and Technical vetting teams with Field Services. The role will involve: * Capable of working independently and remotely, required to perform on site troubleshooting on a wide range of products in a software or hardware environment. * Proficient in the installation, configuration and support of Server/Desktop/EPOS environment and in addition, be able to connect and install client software for various networking platforms at various customer locations in the UK. * Ability to follow documented procedures and adhere to safety and ESD precautions at all times. * Be able to demonstrate strong problem solving techniques with the ability to adapt and learn on the job. * Develop, grow and maintain professional working relationships with all internal stakeholders Call Control, Tech Vetting teams. * Ensure process, procedural and contractual agreements are being followed correctly. * Endeavour to provide all customers with the best level of customer service and support. * Complete documentation including Field Service Call reports and Customer Checksheets and ensure these are returned within SLA timescales. * Work proactively with call allocators to ensure SLA's are met in the most economic way. * Have a solid understanding of customers SLA requirement and use initiative to ensure the expectation is met and exceeded * Any additional activity as directed by Senior Management Key Experience * Have an excellent working knowledge of Server/PC architecture, knowledge of Windows Operating systems, break fix and troubleshooting of Servers, Desktops, EPOS, Laptops, and Printers. * Manufacturer recognised accreditations, ie HP/IBM/Dell. Both Server and Desktop. * At least 6 years customer facing IT industry experience. * Capable of working independently on a wide range of products. * Excellent communication skills. * Excellent proven organisational and customer service skills. * Able to work under pressure. * Able to maintain a consistent high standard of quality and professionalism. * Excellent Time management skills. * Team Player - ability to work as part of the team to deliver operational excellence. * Awareness of ITIL methodologies and best practice. * Previous employment in a similar role. * Ability to show flexibility to help the changing needs of the team. * Adhere to company standards and procedures at all times unless otherwise directed. * Maintain excellent customer relationships. * Maintain high levels of Punctuality, Communication, Attitude, Competence and Quality of Service * Maintain all appropriate Manufacturer Server Accreditations where app Senior Engineer main skills * MUST be able to obtain security clearances, BPSS & SC, (NPPV3 great to have but not essential) * X86 Server Hardware break fix Skills (can replace all components, upgrade Bios/firmware) * Laptop Hardware break fix skills (replace all components) * Must be able to hold Main vendor certifications on Servers & Laptops (Dell, HP, Lenovo) * Will form part of an on call rota covering 24*7*365 call outs Senior Engineer good to have experience/skills * Netapp - major advantage to hold this * Retail/Point of Sale (POS) Personal Attribute * Highly enthusiastic, approachable and self motivated to achieve targets. * Ability to prioritise workload effectively. * A Methodical and accurate approach to the job is critical. * Team focused - a genuine passion to deliver excellence through continuous development and improvement. * Be able to remain positive at all times and influence those around you. * Excellent communicator who can remain objective and focussed with Customers and Internal Agencies alike. * Good relationship management skills. * Previous Senior Field Engineer experience desirable. * Analytical, with exceptional attention to detail. * Innovative thinking, in terms of service quality and improvements * Full UK Driving Licence. "In applying for this position, you consent to your personal data being shared with the specified employer and for your details to remain with GTS for as long as is necessary to process your application. See our Privacy Notice for full information Global Technology Solutions is acting as an Employment Agency in relation to this vacancy.
The Armament supervisor is responsible to the Armament lead and should be an experienced and skilled technician undertaking a range of detailed maintenance activities on aircraft equipment and/or aircraft components. The post holder should have an excellent understanding of the construct of the approved Technical Information set and is competent to supervise personnel who are working on maintenance instructions and in accordance with the organisation's Regulatory Framework and should be able to demonstrate a distinct ability to analyse and diagnose faults to equipment & assemblies, follow diagnostic procedures and work effectively within a team providing guidance to less experienced team members in a diverse and dynamic operational environment. Responsible for maintaining airworthiness through appropriate task delegation and authorisation on an aircraft or aircraft component. Responsible for meeting agreed delivery targets at a tactical level. Demonstrates people management and leadership skills Demonstrates awareness of broader external dependencies and identifies areas for continuous improvement. In addition the Post Holder shall hold certain privileges delegated from the Maintenance Manager. RequirementsCore Activities: Undertake detailed maintenance, inspection and supervision activities of aircraft components. Assuring work carried out has been completed in accordance with the SOW/Work package using the relevant approved technical information. Resolving faults and maintenance issues, including an awareness of configuration management. Undertake and complete tasked maintenance & diagnostic activities on weapons systems/components which will include, as appropriate, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test. Will be responsible for the operational output of each Component MRO Workshop under their control in line with agreed customer requirements. Post holder will also have responsibilities for the cost and schedule adherence of the component maintenance activities. Supervise team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider programme. Responsible for meeting agreed delivery targets in the short to medium term through the supervision of others. Progress reporting against delivery targets to management. Undertake support tasks within the component maintenance facility which are required to maintain compliance with the MOE and AMC procedures (eg oversight checks, control of tooling/test equipment etc.) Undertake fault evaluation and raise ad hoc work cards and for found faults' during maintenance. Ability to scope and carry out independent and vital inspections. Maintain personal & teams task authorisation for working on components in accordance with AMC requirements. Required to provide support and guidance, including allocation of tasks to appropriately authorised maintenance technicians. Provide effective leadership and supervision to team members under your direct supervision. Key Activities: Performance indicators - Ensure the effective management of Part 145 activities by setting delivery targets, monitoring progress and developing performance improvement programmes. Prioritises activities within/across teams to maximise efficiency. Represents the Maintenance Manager at management reviews, where necessary. Responsible for the assessment of escalated issues for any impact on Continuing Airworthiness and generating effective resolution, or sponsoring escalation to management, as appropriate. Completion of activities - Ensure all Part 145 activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Ensure all Part 145 activities are performed by suitably qualified, experienced and authorised personnel. Ensure the integration of Part 145 activity within the business, including the engagement of key stakeholders at all stages of the process. Provide support and guidance to the team(s). Procedure/standards - Manage the Part 145 team(s) compliance with the Part 145 Exposition, its associated procedures and standards, and any other Company procedures and standards, as applicable. Identify, propose and implement change as required, whilst ensuring compliance. Safety Management System - Promote the application of Human Factors, Error Management, Risk Management and Safety Assurance within the Part 145 team(s), together with the proactive analysis, mitigation and management of Hazards. Management System Assurance - Ensure Part 145 team(s) activities are compliant with the AM&S Governance and Assurance framework. Ensure Process Confirmations and independent assurance audits are supported by Part 145 personnel and integrated within/across teams. Manage the response to audit findings in a timely and appropriate manner and provide information into the relevant reviews. Generate and implement effective improvements within/across teams to overcome any non-compliance and monitor effectiveness. Statutory/Regulatory & Legislative requirements - Able to demonstrate a good understanding and application of the relevant Continuing Airworthiness Regulatory framework, and ensure any Regulatory-driven changes are implemented within the Part 145 team(s) activities. Ensure compliance with all other requirements, eg ITAR, EaPW, ISO, etc. Contractual Requirements - Ensure compliance with all applicable contractual requirements, eg through support to contract reviews, and ensure any changes are implemented into the Part 145 activities, as appropriate. Requirements: Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship/qualifications. Academic qualification for this role is a minimum of City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Experienced and competent leader at this level. Typically 2+ years' experience including type, classed as fully competent with all required 'Authorities' in place. Demonstrating breadth of experience, currency & recency via a Log Book (electronic or paper) capturing skills, knowledge and authorities for working on Aircraft type or in bays. Practical experience and expertise in the application of aviation safety standards and safe operating practices. A comprehensive knowledge of the Acceptable Means of Compliance. Management training. Leadership- Foundation. Human Factors- Standard Course Specification. E&PW Awareness- Standard Course Specification. ITAR Awareness- Standard Course Specification. Benefits Competitive Basic Salary 25 Days Annual Leave Annual Bonus On site Parking Pension Scheme Life Assurance
29/04/2024
Full time
The Armament supervisor is responsible to the Armament lead and should be an experienced and skilled technician undertaking a range of detailed maintenance activities on aircraft equipment and/or aircraft components. The post holder should have an excellent understanding of the construct of the approved Technical Information set and is competent to supervise personnel who are working on maintenance instructions and in accordance with the organisation's Regulatory Framework and should be able to demonstrate a distinct ability to analyse and diagnose faults to equipment & assemblies, follow diagnostic procedures and work effectively within a team providing guidance to less experienced team members in a diverse and dynamic operational environment. Responsible for maintaining airworthiness through appropriate task delegation and authorisation on an aircraft or aircraft component. Responsible for meeting agreed delivery targets at a tactical level. Demonstrates people management and leadership skills Demonstrates awareness of broader external dependencies and identifies areas for continuous improvement. In addition the Post Holder shall hold certain privileges delegated from the Maintenance Manager. RequirementsCore Activities: Undertake detailed maintenance, inspection and supervision activities of aircraft components. Assuring work carried out has been completed in accordance with the SOW/Work package using the relevant approved technical information. Resolving faults and maintenance issues, including an awareness of configuration management. Undertake and complete tasked maintenance & diagnostic activities on weapons systems/components which will include, as appropriate, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test. Will be responsible for the operational output of each Component MRO Workshop under their control in line with agreed customer requirements. Post holder will also have responsibilities for the cost and schedule adherence of the component maintenance activities. Supervise team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider programme. Responsible for meeting agreed delivery targets in the short to medium term through the supervision of others. Progress reporting against delivery targets to management. Undertake support tasks within the component maintenance facility which are required to maintain compliance with the MOE and AMC procedures (eg oversight checks, control of tooling/test equipment etc.) Undertake fault evaluation and raise ad hoc work cards and for found faults' during maintenance. Ability to scope and carry out independent and vital inspections. Maintain personal & teams task authorisation for working on components in accordance with AMC requirements. Required to provide support and guidance, including allocation of tasks to appropriately authorised maintenance technicians. Provide effective leadership and supervision to team members under your direct supervision. Key Activities: Performance indicators - Ensure the effective management of Part 145 activities by setting delivery targets, monitoring progress and developing performance improvement programmes. Prioritises activities within/across teams to maximise efficiency. Represents the Maintenance Manager at management reviews, where necessary. Responsible for the assessment of escalated issues for any impact on Continuing Airworthiness and generating effective resolution, or sponsoring escalation to management, as appropriate. Completion of activities - Ensure all Part 145 activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Ensure all Part 145 activities are performed by suitably qualified, experienced and authorised personnel. Ensure the integration of Part 145 activity within the business, including the engagement of key stakeholders at all stages of the process. Provide support and guidance to the team(s). Procedure/standards - Manage the Part 145 team(s) compliance with the Part 145 Exposition, its associated procedures and standards, and any other Company procedures and standards, as applicable. Identify, propose and implement change as required, whilst ensuring compliance. Safety Management System - Promote the application of Human Factors, Error Management, Risk Management and Safety Assurance within the Part 145 team(s), together with the proactive analysis, mitigation and management of Hazards. Management System Assurance - Ensure Part 145 team(s) activities are compliant with the AM&S Governance and Assurance framework. Ensure Process Confirmations and independent assurance audits are supported by Part 145 personnel and integrated within/across teams. Manage the response to audit findings in a timely and appropriate manner and provide information into the relevant reviews. Generate and implement effective improvements within/across teams to overcome any non-compliance and monitor effectiveness. Statutory/Regulatory & Legislative requirements - Able to demonstrate a good understanding and application of the relevant Continuing Airworthiness Regulatory framework, and ensure any Regulatory-driven changes are implemented within the Part 145 team(s) activities. Ensure compliance with all other requirements, eg ITAR, EaPW, ISO, etc. Contractual Requirements - Ensure compliance with all applicable contractual requirements, eg through support to contract reviews, and ensure any changes are implemented into the Part 145 activities, as appropriate. Requirements: Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship/qualifications. Academic qualification for this role is a minimum of City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Experienced and competent leader at this level. Typically 2+ years' experience including type, classed as fully competent with all required 'Authorities' in place. Demonstrating breadth of experience, currency & recency via a Log Book (electronic or paper) capturing skills, knowledge and authorities for working on Aircraft type or in bays. Practical experience and expertise in the application of aviation safety standards and safe operating practices. A comprehensive knowledge of the Acceptable Means of Compliance. Management training. Leadership- Foundation. Human Factors- Standard Course Specification. E&PW Awareness- Standard Course Specification. ITAR Awareness- Standard Course Specification. Benefits Competitive Basic Salary 25 Days Annual Leave Annual Bonus On site Parking Pension Scheme Life Assurance
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
29/04/2024
Full time
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
Our client invites applications for the position of E-7 System Safety Engineer/Safety Engineer, based in Yeovil, Bristol, or Milton Keynes. This opportunity is available as either a Full-Time or part time role, with hybrid working arrangements. Position Overview: As an integral member of our client's team, the E-7 System Safety Engineer will collaborate closely with the Systems Safety and Environmental Engineering Manager and report directly to the E-7 Wedgetail Lead Safety Engineer. The primary focus will be on undertaking development and in-service System Safety activities to support the customer and the UK and US-based suppliers Key Responsibilities: Development of Operational, Product, and System Safety artefacts and associated documentation in compliance with Defence Standard 00-056 for the E-7 programme. Ensuring effective Hazard Identification and Analysis, including the generation of Hazard Logs and Programmable Element Safety Assessment. Chairing System Safety Working Groups and actively participating in customer safety meetings. Identifying, supervising, and implementing risk management strategies and supporting the development of mitigation plans. Applying appropriate safety legislation and regulations and supporting the ongoing development and enhancement of safety processes. Some travel within the UK, and possibly the US, may be required. Preferred Skills, Qualifications & Experience: A degree in Engineering or equivalent qualification, coupled with formal system safety training. Demonstrated experience in leading and developing Safety Assessments for aircraft training and associated synthetic training systems. Previous industry experience in Military Air environment Safety Engineering, with a strong understanding of Def Stan 00-056. Proficiency in safety tools such as CASSANDRA, BowTieXP, Adelard Assurance, and Safety Case Environment. Excellent communication skills, technical proficiency, and project management capabilities are essential. Diplomatic yet assertive approach, with the ability to engage effectively with UK MOD customers, suppliers, and Boeing counterparts. Familiarity with UK military aircraft platforms and systems would be advantageous. Completion or pursuit of a postgraduate qualification in System Safety Engineering is highly desirable. Work Authorisation: This position is open to locally hired candidates with the legal right to work in the UK. Our client will not seek immigration or labour sponsorship for applicants. Security Clearance: Applicants must be eligible to obtain UK security clearance, which requires UK Citizenship.
29/04/2024
Project-based
Our client invites applications for the position of E-7 System Safety Engineer/Safety Engineer, based in Yeovil, Bristol, or Milton Keynes. This opportunity is available as either a Full-Time or part time role, with hybrid working arrangements. Position Overview: As an integral member of our client's team, the E-7 System Safety Engineer will collaborate closely with the Systems Safety and Environmental Engineering Manager and report directly to the E-7 Wedgetail Lead Safety Engineer. The primary focus will be on undertaking development and in-service System Safety activities to support the customer and the UK and US-based suppliers Key Responsibilities: Development of Operational, Product, and System Safety artefacts and associated documentation in compliance with Defence Standard 00-056 for the E-7 programme. Ensuring effective Hazard Identification and Analysis, including the generation of Hazard Logs and Programmable Element Safety Assessment. Chairing System Safety Working Groups and actively participating in customer safety meetings. Identifying, supervising, and implementing risk management strategies and supporting the development of mitigation plans. Applying appropriate safety legislation and regulations and supporting the ongoing development and enhancement of safety processes. Some travel within the UK, and possibly the US, may be required. Preferred Skills, Qualifications & Experience: A degree in Engineering or equivalent qualification, coupled with formal system safety training. Demonstrated experience in leading and developing Safety Assessments for aircraft training and associated synthetic training systems. Previous industry experience in Military Air environment Safety Engineering, with a strong understanding of Def Stan 00-056. Proficiency in safety tools such as CASSANDRA, BowTieXP, Adelard Assurance, and Safety Case Environment. Excellent communication skills, technical proficiency, and project management capabilities are essential. Diplomatic yet assertive approach, with the ability to engage effectively with UK MOD customers, suppliers, and Boeing counterparts. Familiarity with UK military aircraft platforms and systems would be advantageous. Completion or pursuit of a postgraduate qualification in System Safety Engineering is highly desirable. Work Authorisation: This position is open to locally hired candidates with the legal right to work in the UK. Our client will not seek immigration or labour sponsorship for applicants. Security Clearance: Applicants must be eligible to obtain UK security clearance, which requires UK Citizenship.
Global Technology Solutions Ltd
Manchester, Lancashire
Ideal location - Manchester Salary - £27000 - 29000 Hours: Monday to Friday, pick up kit by 08:30 as local PUDO working on client site up till 17:30, overtime available Benefits: Car + Parking cards and Fuel cards + Pension + on call payment Start date - ASAP We have an exciting opportunity for a senior field service engineer to join a blue chip organisation on a permanent basis in Manchester. Senior Field Service Engineer will be required to fault find and repair a variety of IT equipment including Servers, PCs, Laptop, printer and point of sales systems (EPOS) at various Customer locations across the UK. Ensuring company processes, procedures and contractual requirements are followed whilst maintaining high levels of customer service. You must be an experienced time served "Field Service Engineer", a confident communicator at all levels and work well as part of a team. The position will report into Team Leader/Resource Managers (Field) but will also have critical relationships with Call Control and Technical vetting teams with Field Services. The role will involve: * Capable of working independently and remotely, required to perform on site troubleshooting on a wide range of products in a software or hardware environment. * Proficient in the installation, configuration and support of Server/Desktop/EPOS environment and in addition, be able to connect and install client software for various networking platforms at various customer locations in the UK. * Ability to follow documented procedures and adhere to safety and ESD precautions at all times. * Be able to demonstrate strong problem solving techniques with the ability to adapt and learn on the job. * Develop, grow and maintain professional working relationships with all internal stakeholders. * Call Control, Tech Vetting teams. * Ensure process, procedural and contractual agreements are being followed correctly. * Endeavour to provide all customers with the best level of customer service and support. * Complete documentation including Field Service Call reports and Customer Checksheets and ensure these are returned within SLA timescales. * Work proactively with call allocators to ensure SLA's are met in the most economic way. * Have a solid understanding of customers SLA requirement and use initiative to ensure the expectation is met and exceeded * Any additional activity as directed by Senior Management Key Experience * Have an excellent working knowledge of Server/PC architecture, knowledge of Windows Operating systems, break fix and troubleshooting of Servers, Desktops, EPOS, Laptops, and Printers. * Manufacturer recognised accreditations, ie HP/IBM/Dell. Both Server and Desktop. * At least 6 years customer facing IT industry experience. * Capable of working independently on a wide range of products. * Excellent communication skills. * Excellent proven organisational and customer service skills. * Able to work under pressure. * Able to maintain a consistent high standard of quality and professionalism. * Excellent Time management skills. * Team Player - ability to work as part of the team to deliver operational excellence. * Awareness of ITIL methodologies and best practice. * Previous employment in a similar role. * Ability to show flexibility to help the changing needs of the team. * Adhere to company standards and procedures at all times unless otherwise directed. * Maintain excellent customer relationships. * Maintain high levels of Punctuality, Communication, Attitude, Competence and Quality of Service * Maintain all appropriate Manufacturer Server Accreditations where app Senior Engineer main skills * MUST be able to obtain security clearances, BPSS & SC, (NPPV3 great to have but not essential) * X86 Server Hardware break fix Skills (can replace all components, upgrade Bios/firmware) * Laptop Hardware break fix skills (replace all components) * Must be able to hold Main vendor certifications on Servers & Laptops (Dell, HP, Lenovo) * Will form part of an on call rota covering 24*7*365 call outs Senior Engineer good to have experience/skills * Netapp - major advantage to hold this * Retail/Point of Sale (POS) Personal Attribute * Highly enthusiastic, approachable and self motivated to achieve targets. * Ability to prioritise workload effectively. * A Methodical and accurate approach to the job is critical. * Team focused - a genuine passion to deliver excellence through continuous development and improvement. * Be able to remain positive at all times and influence those around you. * Excellent communicator who can remain objective and focussed with Customers and Internal Agencies alike. * Good relationship management skills. * Previous Senior Field Engineer experience desirable. * Analytical, with exceptional attention to detail. * Innovative thinking, in terms of service quality and improvements * Full UK Driving Licence. In applying for this position, you consent to your personal data being shared with the specified employer and for your details to remain with GTS for as long as is necessary to process your application. See our Privacy Notice for full information Global Technology Solutions is acting as an Employment Agency in relation to this vacancy.
29/04/2024
Full time
Ideal location - Manchester Salary - £27000 - 29000 Hours: Monday to Friday, pick up kit by 08:30 as local PUDO working on client site up till 17:30, overtime available Benefits: Car + Parking cards and Fuel cards + Pension + on call payment Start date - ASAP We have an exciting opportunity for a senior field service engineer to join a blue chip organisation on a permanent basis in Manchester. Senior Field Service Engineer will be required to fault find and repair a variety of IT equipment including Servers, PCs, Laptop, printer and point of sales systems (EPOS) at various Customer locations across the UK. Ensuring company processes, procedures and contractual requirements are followed whilst maintaining high levels of customer service. You must be an experienced time served "Field Service Engineer", a confident communicator at all levels and work well as part of a team. The position will report into Team Leader/Resource Managers (Field) but will also have critical relationships with Call Control and Technical vetting teams with Field Services. The role will involve: * Capable of working independently and remotely, required to perform on site troubleshooting on a wide range of products in a software or hardware environment. * Proficient in the installation, configuration and support of Server/Desktop/EPOS environment and in addition, be able to connect and install client software for various networking platforms at various customer locations in the UK. * Ability to follow documented procedures and adhere to safety and ESD precautions at all times. * Be able to demonstrate strong problem solving techniques with the ability to adapt and learn on the job. * Develop, grow and maintain professional working relationships with all internal stakeholders. * Call Control, Tech Vetting teams. * Ensure process, procedural and contractual agreements are being followed correctly. * Endeavour to provide all customers with the best level of customer service and support. * Complete documentation including Field Service Call reports and Customer Checksheets and ensure these are returned within SLA timescales. * Work proactively with call allocators to ensure SLA's are met in the most economic way. * Have a solid understanding of customers SLA requirement and use initiative to ensure the expectation is met and exceeded * Any additional activity as directed by Senior Management Key Experience * Have an excellent working knowledge of Server/PC architecture, knowledge of Windows Operating systems, break fix and troubleshooting of Servers, Desktops, EPOS, Laptops, and Printers. * Manufacturer recognised accreditations, ie HP/IBM/Dell. Both Server and Desktop. * At least 6 years customer facing IT industry experience. * Capable of working independently on a wide range of products. * Excellent communication skills. * Excellent proven organisational and customer service skills. * Able to work under pressure. * Able to maintain a consistent high standard of quality and professionalism. * Excellent Time management skills. * Team Player - ability to work as part of the team to deliver operational excellence. * Awareness of ITIL methodologies and best practice. * Previous employment in a similar role. * Ability to show flexibility to help the changing needs of the team. * Adhere to company standards and procedures at all times unless otherwise directed. * Maintain excellent customer relationships. * Maintain high levels of Punctuality, Communication, Attitude, Competence and Quality of Service * Maintain all appropriate Manufacturer Server Accreditations where app Senior Engineer main skills * MUST be able to obtain security clearances, BPSS & SC, (NPPV3 great to have but not essential) * X86 Server Hardware break fix Skills (can replace all components, upgrade Bios/firmware) * Laptop Hardware break fix skills (replace all components) * Must be able to hold Main vendor certifications on Servers & Laptops (Dell, HP, Lenovo) * Will form part of an on call rota covering 24*7*365 call outs Senior Engineer good to have experience/skills * Netapp - major advantage to hold this * Retail/Point of Sale (POS) Personal Attribute * Highly enthusiastic, approachable and self motivated to achieve targets. * Ability to prioritise workload effectively. * A Methodical and accurate approach to the job is critical. * Team focused - a genuine passion to deliver excellence through continuous development and improvement. * Be able to remain positive at all times and influence those around you. * Excellent communicator who can remain objective and focussed with Customers and Internal Agencies alike. * Good relationship management skills. * Previous Senior Field Engineer experience desirable. * Analytical, with exceptional attention to detail. * Innovative thinking, in terms of service quality and improvements * Full UK Driving Licence. In applying for this position, you consent to your personal data being shared with the specified employer and for your details to remain with GTS for as long as is necessary to process your application. See our Privacy Notice for full information Global Technology Solutions is acting as an Employment Agency in relation to this vacancy.
Global Technology Solutions Ltd
Stoke-on-trent, Staffordshire
Ideal location - Stoke on Trent Salary - £27000 - 29000 Hours: Monday to Friday, pick up kit by 08:30 as local PUDO working on client site up till 17:30, overtime available Benefits: Car + Parking cards and Fuel cards + Pension + on call payment Start date - ASAP We have an exciting opportunity for a senior field service engineer to join a blue chip organisation on a permanent basis in Stoke on Trent Senior Field Service Engineer will be required to fault find and repair a variety of IT equipment including Servers, PCs, Laptop, printer and point of sales systems (EPOS) at various Customer locations across the UK. Ensuring company processes, procedures and contractual requirements are followed whilst maintaining high levels of customer service. You must be an experienced time served "Field Service Engineer", a confident communicator at all levels and work well as part of a team. The position will report into Team Leader/Resource Managers (Field) but will also have critical relationships with Call Control and Technical vetting teams with Field Services. The role will involve: * Capable of working independently and remotely, required to perform on site troubleshooting on a wide range of products in a software or hardware environment. * Proficient in the installation, configuration and support of Server/Desktop/EPOS environment and in addition, be able to connect and install client software for various networking platforms at various customer locations in the UK. * Ability to follow documented procedures and adhere to safety and ESD precautions at all times. * Be able to demonstrate strong problem solving techniques with the ability to adapt and learn on the job. * Develop, grow and maintain professional working relationships with all internal stakeholders. * Call Control, Tech Vetting teams. * Ensure process, procedural and contractual agreements are being followed correctly. * Endeavour to provide all customers with the best level of customer service and support. * Complete documentation including Field Service Call reports and Customer Checksheets and ensure these are returned within SLA timescales. * Work proactively with call allocators to ensure SLA's are met in the most economic way. * Have a solid understanding of customers SLA requirement and use initiative to ensure the expectation is met and exceeded * Any additional activity as directed by Senior Management Key Experience * Have an excellent working knowledge of Server/PC architecture, knowledge of Windows Operating systems, break fix and troubleshooting of Servers, Desktops, EPOS, Laptops, and Printers. * Manufacturer recognised accreditations, ie HP/IBM/Dell. Both Server and Desktop. * At least 6 years customer facing IT industry experience. * Capable of working independently on a wide range of products. * Excellent communication skills. * Excellent proven organisational and customer service skills. * Able to work under pressure. * Able to maintain a consistent high standard of quality and professionalism. * Excellent Time management skills. * Team Player - ability to work as part of the team to deliver operational excellence. * Awareness of ITIL methodologies and best practice. * Previous employment in a similar role. * Ability to show flexibility to help the changing needs of the team. * Adhere to company standards and procedures at all times unless otherwise directed. * Maintain excellent customer relationships. * Maintain high levels of Punctuality, Communication, Attitude, Competence and Quality of Service * Maintain all appropriate Manufacturer Server Accreditations where app Senior Engineer main skills * MUST be able to obtain security clearances, BPSS & SC, (NPPV3 great to have but not essential) * X86 Server Hardware break fix Skills (can replace all components, upgrade Bios/firmware) * Laptop Hardware break fix skills (replace all components) * Must be able to hold Main vendor certifications on Servers & Laptops (Dell, HP, Lenovo) * Will form part of an on call rota covering 24*7*365 call outs Senior Engineer good to have experience/skills * Netapp - major advantage to hold this * Retail/Point of Sale (POS) Personal Attribute * Highly enthusiastic, approachable and self motivated to achieve targets. * Ability to prioritise workload effectively. * A Methodical and accurate approach to the job is critical. * Team focused - a genuine passion to deliver excellence through continuous development and improvement. * Be able to remain positive at all times and influence those around you. * Excellent communicator who can remain objective and focussed with Customers and Internal Agencies alike. * Good relationship management skills. * Previous Senior Field Engineer experience desirable. * Analytical, with exceptional attention to detail. * Innovative thinking, in terms of service quality and improvements * Full UK Driving Licence. "In applying for this position, you consent to your personal data being shared with the specified employer and for your details to remain with GTS for as long as is necessary to process your application. See our Privacy Notice for full information Global Technology Solutions is acting as an Employment Agency in relation to this vacancy.
29/04/2024
Full time
Ideal location - Stoke on Trent Salary - £27000 - 29000 Hours: Monday to Friday, pick up kit by 08:30 as local PUDO working on client site up till 17:30, overtime available Benefits: Car + Parking cards and Fuel cards + Pension + on call payment Start date - ASAP We have an exciting opportunity for a senior field service engineer to join a blue chip organisation on a permanent basis in Stoke on Trent Senior Field Service Engineer will be required to fault find and repair a variety of IT equipment including Servers, PCs, Laptop, printer and point of sales systems (EPOS) at various Customer locations across the UK. Ensuring company processes, procedures and contractual requirements are followed whilst maintaining high levels of customer service. You must be an experienced time served "Field Service Engineer", a confident communicator at all levels and work well as part of a team. The position will report into Team Leader/Resource Managers (Field) but will also have critical relationships with Call Control and Technical vetting teams with Field Services. The role will involve: * Capable of working independently and remotely, required to perform on site troubleshooting on a wide range of products in a software or hardware environment. * Proficient in the installation, configuration and support of Server/Desktop/EPOS environment and in addition, be able to connect and install client software for various networking platforms at various customer locations in the UK. * Ability to follow documented procedures and adhere to safety and ESD precautions at all times. * Be able to demonstrate strong problem solving techniques with the ability to adapt and learn on the job. * Develop, grow and maintain professional working relationships with all internal stakeholders. * Call Control, Tech Vetting teams. * Ensure process, procedural and contractual agreements are being followed correctly. * Endeavour to provide all customers with the best level of customer service and support. * Complete documentation including Field Service Call reports and Customer Checksheets and ensure these are returned within SLA timescales. * Work proactively with call allocators to ensure SLA's are met in the most economic way. * Have a solid understanding of customers SLA requirement and use initiative to ensure the expectation is met and exceeded * Any additional activity as directed by Senior Management Key Experience * Have an excellent working knowledge of Server/PC architecture, knowledge of Windows Operating systems, break fix and troubleshooting of Servers, Desktops, EPOS, Laptops, and Printers. * Manufacturer recognised accreditations, ie HP/IBM/Dell. Both Server and Desktop. * At least 6 years customer facing IT industry experience. * Capable of working independently on a wide range of products. * Excellent communication skills. * Excellent proven organisational and customer service skills. * Able to work under pressure. * Able to maintain a consistent high standard of quality and professionalism. * Excellent Time management skills. * Team Player - ability to work as part of the team to deliver operational excellence. * Awareness of ITIL methodologies and best practice. * Previous employment in a similar role. * Ability to show flexibility to help the changing needs of the team. * Adhere to company standards and procedures at all times unless otherwise directed. * Maintain excellent customer relationships. * Maintain high levels of Punctuality, Communication, Attitude, Competence and Quality of Service * Maintain all appropriate Manufacturer Server Accreditations where app Senior Engineer main skills * MUST be able to obtain security clearances, BPSS & SC, (NPPV3 great to have but not essential) * X86 Server Hardware break fix Skills (can replace all components, upgrade Bios/firmware) * Laptop Hardware break fix skills (replace all components) * Must be able to hold Main vendor certifications on Servers & Laptops (Dell, HP, Lenovo) * Will form part of an on call rota covering 24*7*365 call outs Senior Engineer good to have experience/skills * Netapp - major advantage to hold this * Retail/Point of Sale (POS) Personal Attribute * Highly enthusiastic, approachable and self motivated to achieve targets. * Ability to prioritise workload effectively. * A Methodical and accurate approach to the job is critical. * Team focused - a genuine passion to deliver excellence through continuous development and improvement. * Be able to remain positive at all times and influence those around you. * Excellent communicator who can remain objective and focussed with Customers and Internal Agencies alike. * Good relationship management skills. * Previous Senior Field Engineer experience desirable. * Analytical, with exceptional attention to detail. * Innovative thinking, in terms of service quality and improvements * Full UK Driving Licence. "In applying for this position, you consent to your personal data being shared with the specified employer and for your details to remain with GTS for as long as is necessary to process your application. See our Privacy Notice for full information Global Technology Solutions is acting as an Employment Agency in relation to this vacancy.
Clearwater People Solutions
Manchester, Lancashire
ATTENTION! Plumbers/Mechanical Engineers Wanted! Build your experience further with this fantastic opportunity as a Plumber/Mechanical Engineer, installing, servicing and testing various appliances within a specific location. This vacancy is a 3-6 month contract, with a possibility to go permanent. Key Responsibilities for the Plumber/Mechanical Engineer: Complete all statutory and non-statutory maintenance in accordance with set maintenance schedules and contract SLA's. Complete reactive works in line with contract SLA's/ Sound awareness of risk assessment and working safely with equipment. Ability to measure, work to plans, reach technical diagrams and communicate, present and report technical information as appropriate to trade/skill Skills Required for the Plumber/Mechanical Engineer: NVQ Level 3 in plumbing/heating/air conditioning/mechanical engineering (Essential) Sound knowledge of Health & Safety including ISO9001 & 14,001. Experience of working on Commercial Hot & Cold water systems is essential. Approved and formal apprenticeship served in plumbing/mechanical skills area required or relevant and practical experience within a similar industry Experience in the maintenance of: Heating and domestic water services, TMV's, Air handling units, Manage Plant Rooms, including Steam Pipes If this role is of interest, please apply for additional information or contact Thomas Edevane.
29/04/2024
ATTENTION! Plumbers/Mechanical Engineers Wanted! Build your experience further with this fantastic opportunity as a Plumber/Mechanical Engineer, installing, servicing and testing various appliances within a specific location. This vacancy is a 3-6 month contract, with a possibility to go permanent. Key Responsibilities for the Plumber/Mechanical Engineer: Complete all statutory and non-statutory maintenance in accordance with set maintenance schedules and contract SLA's. Complete reactive works in line with contract SLA's/ Sound awareness of risk assessment and working safely with equipment. Ability to measure, work to plans, reach technical diagrams and communicate, present and report technical information as appropriate to trade/skill Skills Required for the Plumber/Mechanical Engineer: NVQ Level 3 in plumbing/heating/air conditioning/mechanical engineering (Essential) Sound knowledge of Health & Safety including ISO9001 & 14,001. Experience of working on Commercial Hot & Cold water systems is essential. Approved and formal apprenticeship served in plumbing/mechanical skills area required or relevant and practical experience within a similar industry Experience in the maintenance of: Heating and domestic water services, TMV's, Air handling units, Manage Plant Rooms, including Steam Pipes If this role is of interest, please apply for additional information or contact Thomas Edevane.
ENGINEERING MANAGER Up to £75 per hour Plymouth - Hybrid (2-3 days in office) Discovering unparalleled innovation and expertise with a global leader in engineering and technology solutions, looking for an ENGINEERING MANAGER . You will experience top-tier services designed to elevate your projects and exceed expectations working with them. You will be involved in supporting the Design and Safety Manager with day-to-day engineering decisions. Report directly to the Design and Safety Manager and provide support to them, ensuring the delivery of engineering outcomes and the assurance of technical documentation. Skills Required: Managed up to at least 40 engineers. Knowledge of Design and Nuclear Safety. Mechanical/Electrical/Civil experience. Background in Engineering systems and design. Preferred - extensive knowledge of design codes. Join a trusted industry leader committed to driving progress and success on a global scale. Unlock new possibilities for your ventures with their esteemed team in Defence, Nuclear, Marine, and more. *PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role.
29/04/2024
Project-based
ENGINEERING MANAGER Up to £75 per hour Plymouth - Hybrid (2-3 days in office) Discovering unparalleled innovation and expertise with a global leader in engineering and technology solutions, looking for an ENGINEERING MANAGER . You will experience top-tier services designed to elevate your projects and exceed expectations working with them. You will be involved in supporting the Design and Safety Manager with day-to-day engineering decisions. Report directly to the Design and Safety Manager and provide support to them, ensuring the delivery of engineering outcomes and the assurance of technical documentation. Skills Required: Managed up to at least 40 engineers. Knowledge of Design and Nuclear Safety. Mechanical/Electrical/Civil experience. Background in Engineering systems and design. Preferred - extensive knowledge of design codes. Join a trusted industry leader committed to driving progress and success on a global scale. Unlock new possibilities for your ventures with their esteemed team in Defence, Nuclear, Marine, and more. *PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role.
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
29/04/2024
Project-based
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.