ARM (Advanced Resource Managers)
Corsham, Wiltshire
Lead Mechanical Engineer (Assembly, Integration & Testing) Corsham 12-month contract Paying up to £45p/h (Umbrella) ARM have partnered with an Aerospace client who are looking for an experienced AIT engineer to work out of their manufacturing site based in Corsham. As the AIT Lead Engineer, you'll be responsible for leading the Mechanical team and ensuring all engineering concepts are delivered to the shop floor. Responsibilities: * Leading a team of AIT engineers on specific projects as well as planning the mechanical team's activities on a weekly basis. * Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A - E' * Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures, and test reports. * Control of all project MGSE, flight & support equipment * Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. * Alignment - producing test procedures and operating and maintaining optical alignment equipment. * Designing test equipment, overseeing its manufacture, and commissioning * Mechanical handling of spacecraft, instruments, payloads, solar arrays, antennas etc * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Install and validate test instrumentation. * Support propulsion testing * Handling and installation of thermal hardware * Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation associated with performing these tasks. * Pyrotechnic handling, installation, and safety * Plan and control the workload of the AIT team consisting of engineers and technicians. * Be able to travel overseas to work for short periods (typically 2-3 months, could be 6-7 months on occasions) * Be able to integrate quickly and easily into an AIT team. Experience required: * Appreciation of satellite integration processes and project phases * Use of SAP or other ERP System * Understanding of build documentation and the need for it * Driving build quality through review of processes and implementation of improvements * Managing a team during day-to-day activities ensuring work is completed on time and the correct standard. * Controlling and delivery of projects to budget and schedule * Face-to-face dealings with customers and suppliers * Worked in volatile, high-pressure environments to resolve technical and personnel conflicts. * Spacecraft Mechanical testing on prime projects is essential. * Leading other team members * Production of MGSE specs and operation of MGSE and flight HW * Production of high-quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
03/05/2024
Project-based
Lead Mechanical Engineer (Assembly, Integration & Testing) Corsham 12-month contract Paying up to £45p/h (Umbrella) ARM have partnered with an Aerospace client who are looking for an experienced AIT engineer to work out of their manufacturing site based in Corsham. As the AIT Lead Engineer, you'll be responsible for leading the Mechanical team and ensuring all engineering concepts are delivered to the shop floor. Responsibilities: * Leading a team of AIT engineers on specific projects as well as planning the mechanical team's activities on a weekly basis. * Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A - E' * Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures, and test reports. * Control of all project MGSE, flight & support equipment * Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. * Alignment - producing test procedures and operating and maintaining optical alignment equipment. * Designing test equipment, overseeing its manufacture, and commissioning * Mechanical handling of spacecraft, instruments, payloads, solar arrays, antennas etc * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Install and validate test instrumentation. * Support propulsion testing * Handling and installation of thermal hardware * Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation associated with performing these tasks. * Pyrotechnic handling, installation, and safety * Plan and control the workload of the AIT team consisting of engineers and technicians. * Be able to travel overseas to work for short periods (typically 2-3 months, could be 6-7 months on occasions) * Be able to integrate quickly and easily into an AIT team. Experience required: * Appreciation of satellite integration processes and project phases * Use of SAP or other ERP System * Understanding of build documentation and the need for it * Driving build quality through review of processes and implementation of improvements * Managing a team during day-to-day activities ensuring work is completed on time and the correct standard. * Controlling and delivery of projects to budget and schedule * Face-to-face dealings with customers and suppliers * Worked in volatile, high-pressure environments to resolve technical and personnel conflicts. * Spacecraft Mechanical testing on prime projects is essential. * Leading other team members * Production of MGSE specs and operation of MGSE and flight HW * Production of high-quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
ARM (Advanced Resource Managers)
Stevenage, Hertfordshire
Mechanical Engineer (Assembly, Integration & Testing) Stevenage 12-month contract Paying up to £35p/h (Umbrella) ARM has partnered with an Aerospace client who is looking for an experienced Mechanical Engineer (AIT) to work out of their manufacturing site based in Stevenage. As the AIT Mechanical Engineer, you'll be responsible for providing support on writing processes, plans, and procedures in 3D Experience for the production of Satellites and payloads. This includes supporting hardware assembly on the Satellites such as black boxes, Solar Array, and structure panels. Supporting Satellite environmental testing at the test facility. Responsibilities: * Support to the customization phase starting at the project kick-off. * Support project DMU (Digital mock-up/design for manufacture) sessions to ensure design for manufacture. * Lead the installation of Satellite appendages and applicable integration flows and preparation. * Oversee unit installation activities on the Satellite. * Support quality reviews, conduct PFMEA and Root Cause Analysis * Support in the creation of re-work instructions based on project requirements and identify parts and tooling required to carry them out. * Design of tooling/build aids for assembly execution * Support to R&D * Training module creation and maintenance. Experience required: * Minimum of HNC level in a Mechanical engineering discipline * Good planning skills and process competence, (MRP system experience an advantage) * Satellite Appendage installation process (Solar Array, reflectors, antennas, deployable systems). * Good understanding and detailed experience of complex mechanical systems. * Lean manufacturing techniques including 5S, root cause analysis, and continuous improvement. * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Handling and installation of thermal hardware (heaters, thermistors) * Mechanical integration of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation/process associated with performing these * Previous experience with payload builds is a distinct advantage. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
03/05/2024
Project-based
Mechanical Engineer (Assembly, Integration & Testing) Stevenage 12-month contract Paying up to £35p/h (Umbrella) ARM has partnered with an Aerospace client who is looking for an experienced Mechanical Engineer (AIT) to work out of their manufacturing site based in Stevenage. As the AIT Mechanical Engineer, you'll be responsible for providing support on writing processes, plans, and procedures in 3D Experience for the production of Satellites and payloads. This includes supporting hardware assembly on the Satellites such as black boxes, Solar Array, and structure panels. Supporting Satellite environmental testing at the test facility. Responsibilities: * Support to the customization phase starting at the project kick-off. * Support project DMU (Digital mock-up/design for manufacture) sessions to ensure design for manufacture. * Lead the installation of Satellite appendages and applicable integration flows and preparation. * Oversee unit installation activities on the Satellite. * Support quality reviews, conduct PFMEA and Root Cause Analysis * Support in the creation of re-work instructions based on project requirements and identify parts and tooling required to carry them out. * Design of tooling/build aids for assembly execution * Support to R&D * Training module creation and maintenance. Experience required: * Minimum of HNC level in a Mechanical engineering discipline * Good planning skills and process competence, (MRP system experience an advantage) * Satellite Appendage installation process (Solar Array, reflectors, antennas, deployable systems). * Good understanding and detailed experience of complex mechanical systems. * Lean manufacturing techniques including 5S, root cause analysis, and continuous improvement. * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Handling and installation of thermal hardware (heaters, thermistors) * Mechanical integration of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation/process associated with performing these * Previous experience with payload builds is a distinct advantage. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
ARM (Advanced Resource Managers)
Gloucester, Gloucestershire
A market-leading Aerospace client of ours is currently in the market for a Maintenance Fitter to join their team based in Gloucester. You will be part of a diverse multi skilled process and assemble maintenance team, working on equipment used in surface finish, heat treatment, Non-Destructive Testing (NDT), paint & OE Assembly. This role involves being responsible for the safe upkeep and reliability of production assets used in the manufacturing of aircraft parts. Your responsibilities will include: * Carrying out reactive and preventative maintenance. * Interoperation of engineering drawings to fault find & identify spare parts required. * Documenting & Prioritising work through a CMMS. * Operate within all HS&E standards and Policies. What they are looking for. Mandatory: * Time served engineering maintenance apprenticeship (NVQ Level 3) * Must be able to read mechanical drawings including assembly and schematics. * Ability to work as part of a team and work independently. * Ability to demonstrate fault-finding skills/abilities. * Fabrication and fitting skills (Core bench-fitting skills necessary). * Experience using a CMMS (Computerised Maintenance Management System). * Be able to work safely and adhere to HS&E standards and policies. Preferred: * Suitable experience working with furnaces, NDT equipment or surface finish equipment * Electrical experience/qualification. * HNC in mechanical engineering. * Knowledge of lean, 5s & 6 sigma methodologies. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
03/05/2024
Full time
A market-leading Aerospace client of ours is currently in the market for a Maintenance Fitter to join their team based in Gloucester. You will be part of a diverse multi skilled process and assemble maintenance team, working on equipment used in surface finish, heat treatment, Non-Destructive Testing (NDT), paint & OE Assembly. This role involves being responsible for the safe upkeep and reliability of production assets used in the manufacturing of aircraft parts. Your responsibilities will include: * Carrying out reactive and preventative maintenance. * Interoperation of engineering drawings to fault find & identify spare parts required. * Documenting & Prioritising work through a CMMS. * Operate within all HS&E standards and Policies. What they are looking for. Mandatory: * Time served engineering maintenance apprenticeship (NVQ Level 3) * Must be able to read mechanical drawings including assembly and schematics. * Ability to work as part of a team and work independently. * Ability to demonstrate fault-finding skills/abilities. * Fabrication and fitting skills (Core bench-fitting skills necessary). * Experience using a CMMS (Computerised Maintenance Management System). * Be able to work safely and adhere to HS&E standards and policies. Preferred: * Suitable experience working with furnaces, NDT equipment or surface finish equipment * Electrical experience/qualification. * HNC in mechanical engineering. * Knowledge of lean, 5s & 6 sigma methodologies. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
We are currently looking on behalf of one of our important clients for a Team Lead Electrical Engineer (German Speaking). The role is a permanent position based in Bern Canton & comes with some home office flexibility. Your Role: Manage & support a team of six manufacturing technology specialists. Hold responsibility for the entire life cycle of high-voltage generators, including their development, production & adaptation to new requirements. Partake in the continuous improvement of manufacturing processes to ensure high quality & efficiency. Act as a point of contact for component management & finding solutions to problems with components & deliveries. Your Skills & Experience: At least 3 years of professional experience in Electrical Engineering within Industrial Environments. Skilled & experienced in Managing Projects. Ideally experienced in Leading Team (or very motivated to gain experience). Your Profile: Completed University Degree as an Electrical Engineer or similar & Training as an Electronics Technician, Automation Technician or Similar. Open, transparent & able to inspire others & work effectively within international environments. Fluent in English & German language skills to at least C1 Level is a mandatory requirement.
02/05/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Electrical Engineer (German Speaking). The role is a permanent position based in Bern Canton & comes with some home office flexibility. Your Role: Manage & support a team of six manufacturing technology specialists. Hold responsibility for the entire life cycle of high-voltage generators, including their development, production & adaptation to new requirements. Partake in the continuous improvement of manufacturing processes to ensure high quality & efficiency. Act as a point of contact for component management & finding solutions to problems with components & deliveries. Your Skills & Experience: At least 3 years of professional experience in Electrical Engineering within Industrial Environments. Skilled & experienced in Managing Projects. Ideally experienced in Leading Team (or very motivated to gain experience). Your Profile: Completed University Degree as an Electrical Engineer or similar & Training as an Electronics Technician, Automation Technician or Similar. Open, transparent & able to inspire others & work effectively within international environments. Fluent in English & German language skills to at least C1 Level is a mandatory requirement.
Data Compliance Specialist Permanent Remote - United Kingdom £50,000 - £54,000 per annum I am currently work with one of the world's leading manufacturing businesses and their brand new Health Care business as a Data Compliance Specialist. This is a fully home based role with very occasional travel (circa once a quarter) for team meetings. This is an ideal opportunity for an experienced and diligent Data Compliance Specialist with a demonstrable track record in working with vast quantities of data and working on large scale projects. My clients has a terrific reputation as an employer and over the years that I have worked on roles for them, the feedback from candidates has been excellent So, if you're looking to join a global, market leading company that will reward you with both an attractive salary and benefits package then get in touch to find out more. Key Responsibilities Manage GDPR/Compliance projects of various duration lengths using defined company processes and tools to produce the desired results. Schedule, coordinate, document and monitor all compliance activities and tasks. Track assigned tasks and associated completion dates, ensuring process work flow is accurately followed. Initiate actions to lead projects, linking project steps to business strategies. Ensure Data Protection project objectives and deadlines are met. Present project recommendations to key stakeholders. Initiate actions to design, develop and implement new or improved projects or processes. Monitor and report on the regional 'threat horizon' to anticipate risks. Vendor management - pre-engagement screening and ongoing monitoring and audit of sub-processors and service providers. Provide support and privacy-specific training to NER staff. Support with preparation and completion of various DP and Privacy Assessments. Complete and maintain DTAC documentation for new and existing products, where appropriate. Liaisie with relevant authorities and DP points of contact at Client organisations UK GDPR-specific responsibilities include: Update Company HIS' register of data processing activities (RoPA) for all new customers and products as well as monitoring and recording changes to existing processing activities and client engagements Contribute to review and implementation of contractual arrangements with Clients and partners Implement procedures to record key information needed such as Data Protection Officer and Data Processing Agreement details of customers. Update Company HIS' product inventory and data. Document and track procedures for customer and product support accounting for international data transfer restrictions. Monitor relevant legislation and regulatory guidance for important changes. Support contract management activities. Facilitate information gathering for internal or external audits Facilitate discussion with client representatives and staff in relation to the appropriate processing of personal Responding to staff queries in a timely . Participate in discussions, policy reviews and projects Your Skills and Expertise Experience working in regulated, Matrix-based corporate environments Familiarity with contracts as they relate to European data protection laws, including knowledge of basic data security and privacy disciplines Ability to manage multiple projects and to prioritize completion in a fast-paced environment Responds strongly and positively to challenging work and deadlines Ability to identify and resolve problems and issues, creating procedures and tools to prevent future problems Able to take own initiative in recognising and raising awareness of compliance risks Additional qualifications that could help you succeed even further in this role include Bachelor's degree level educated Role Location - role covers the North Europe Region to incorporate the UK, Ireland, Nordics and Baltics. Candidate location - flexible within the UK Travel - Occasionally within the UK ECS Recruitment Group Ltd is acting as an Employment Agency in relation to this vacancy.
01/05/2024
Full time
Data Compliance Specialist Permanent Remote - United Kingdom £50,000 - £54,000 per annum I am currently work with one of the world's leading manufacturing businesses and their brand new Health Care business as a Data Compliance Specialist. This is a fully home based role with very occasional travel (circa once a quarter) for team meetings. This is an ideal opportunity for an experienced and diligent Data Compliance Specialist with a demonstrable track record in working with vast quantities of data and working on large scale projects. My clients has a terrific reputation as an employer and over the years that I have worked on roles for them, the feedback from candidates has been excellent So, if you're looking to join a global, market leading company that will reward you with both an attractive salary and benefits package then get in touch to find out more. Key Responsibilities Manage GDPR/Compliance projects of various duration lengths using defined company processes and tools to produce the desired results. Schedule, coordinate, document and monitor all compliance activities and tasks. Track assigned tasks and associated completion dates, ensuring process work flow is accurately followed. Initiate actions to lead projects, linking project steps to business strategies. Ensure Data Protection project objectives and deadlines are met. Present project recommendations to key stakeholders. Initiate actions to design, develop and implement new or improved projects or processes. Monitor and report on the regional 'threat horizon' to anticipate risks. Vendor management - pre-engagement screening and ongoing monitoring and audit of sub-processors and service providers. Provide support and privacy-specific training to NER staff. Support with preparation and completion of various DP and Privacy Assessments. Complete and maintain DTAC documentation for new and existing products, where appropriate. Liaisie with relevant authorities and DP points of contact at Client organisations UK GDPR-specific responsibilities include: Update Company HIS' register of data processing activities (RoPA) for all new customers and products as well as monitoring and recording changes to existing processing activities and client engagements Contribute to review and implementation of contractual arrangements with Clients and partners Implement procedures to record key information needed such as Data Protection Officer and Data Processing Agreement details of customers. Update Company HIS' product inventory and data. Document and track procedures for customer and product support accounting for international data transfer restrictions. Monitor relevant legislation and regulatory guidance for important changes. Support contract management activities. Facilitate information gathering for internal or external audits Facilitate discussion with client representatives and staff in relation to the appropriate processing of personal Responding to staff queries in a timely . Participate in discussions, policy reviews and projects Your Skills and Expertise Experience working in regulated, Matrix-based corporate environments Familiarity with contracts as they relate to European data protection laws, including knowledge of basic data security and privacy disciplines Ability to manage multiple projects and to prioritize completion in a fast-paced environment Responds strongly and positively to challenging work and deadlines Ability to identify and resolve problems and issues, creating procedures and tools to prevent future problems Able to take own initiative in recognising and raising awareness of compliance risks Additional qualifications that could help you succeed even further in this role include Bachelor's degree level educated Role Location - role covers the North Europe Region to incorporate the UK, Ireland, Nordics and Baltics. Candidate location - flexible within the UK Travel - Occasionally within the UK ECS Recruitment Group Ltd is acting as an Employment Agency in relation to this vacancy.
Adecco are working with a Medical Device company focused on rapid growth over the next two years. Our client, a supplier of Class I Medical Devices, is looking for a permanent QARA Specialist to join the team. With a heavier focus on RA, this is a role that will allow you to work on a variety of tasks throughout your career. Based in Northampton, the client is happy to allow hybrid working with 2 days from home and 3 days in the office. There are two main projects to focus on initially: Creating technical files for the company's products, collaborating with external regulatory consultants for gap analysis and review. Managing and reporting on complaints, conducting thorough investigations, and ensuring timely resolution. Working for a smaller organisation like this, it's important you are used to a busy manufacturing environment, with the ability to explain complicated QARA processes in simple terms to the wider business. You will work closely with the QARA Manager, and your role will grow as the company continue to expand their product portfolio. Interested? Apply now with an up to date CV and I will be in touch.
30/04/2024
Full time
Adecco are working with a Medical Device company focused on rapid growth over the next two years. Our client, a supplier of Class I Medical Devices, is looking for a permanent QARA Specialist to join the team. With a heavier focus on RA, this is a role that will allow you to work on a variety of tasks throughout your career. Based in Northampton, the client is happy to allow hybrid working with 2 days from home and 3 days in the office. There are two main projects to focus on initially: Creating technical files for the company's products, collaborating with external regulatory consultants for gap analysis and review. Managing and reporting on complaints, conducting thorough investigations, and ensuring timely resolution. Working for a smaller organisation like this, it's important you are used to a busy manufacturing environment, with the ability to explain complicated QARA processes in simple terms to the wider business. You will work closely with the QARA Manager, and your role will grow as the company continue to expand their product portfolio. Interested? Apply now with an up to date CV and I will be in touch.
Clinical Solutions Specialist. Job Summary: Our client a market leading global digital healthcare supplier require a Clinical Solutions Specialist to play a crucial role in connecting clinical and IT teams within healthcare organisations (NHS). Working closely with Clinical and Professional Services teams, this role facilitates successful customer implementation projects post-sale by applying clinical expertise, organisational knowledge, and change management skills. The position involves collaborating with clinical teams to understand workflows, define functional requirements, oversee configuration activities, and coordinate user testing. Additionally, the role contributes to refining clinical implementation methodology and requires some domestic and occasional international travel. Duties and Responsibilities: - Facilitate communication between clinical and IT teams through on-site visits, phone calls, web conferences, and email. - Execute project tasks including consulting on solutions, clinical workflow design and testing, and providing guidance on best practices. - Develop concise Clinical Design Documentation outlining workflows and recommendations for each clinical area. - Contribute to creating and maintaining process-related best practices, training materials, and documentation. - Identify clinical risks and assist in developing risk mitigation strategies. - Collaborate with Clinical Informatics Analyst to enhance existing workflows using digital solutions. - Offer implementation and post-implementation support. - Willingness to travel and work on-site at various healthcare facilities. - Engage with IT and clinical leadership and staff. - Perform other duties as assigned. Qualifications: - Preferred: Nursing degree or equivalent extensive clinical operations experience (Nursing, Radiologist etc) - Previous or current clinical or operational experience required. - Expertise in clinical workflows in major acute care hospital settings. - Credibility in the clinical environment. - Ability to translate clinical terminology and processes into layman's terms for non-clinical colleagues. - Excellent communication skills and ability to network with clinical peers and team members. - Capable of leading or participating in cross-functional teams. - Familiarity with acute care hospital information technologies preferred. - Knowledge of healthcare policies and regulations, such as NHS guidelines and information governance, preferred. - Familiarity with product management and software development life cycle preferred but not required. - Strong writing skills to document clinical analysis and recommendations clearly. This is an excellent opportunity to move into a full time digital career using your extensive clinical background. This is a remote role with some onsite work for meetings with clients 10%-20% of the time with very occasional longer periods, candidates require excellent communication skills and the ability to interact and direct senior healthcare clients. People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
29/04/2024
Full time
Clinical Solutions Specialist. Job Summary: Our client a market leading global digital healthcare supplier require a Clinical Solutions Specialist to play a crucial role in connecting clinical and IT teams within healthcare organisations (NHS). Working closely with Clinical and Professional Services teams, this role facilitates successful customer implementation projects post-sale by applying clinical expertise, organisational knowledge, and change management skills. The position involves collaborating with clinical teams to understand workflows, define functional requirements, oversee configuration activities, and coordinate user testing. Additionally, the role contributes to refining clinical implementation methodology and requires some domestic and occasional international travel. Duties and Responsibilities: - Facilitate communication between clinical and IT teams through on-site visits, phone calls, web conferences, and email. - Execute project tasks including consulting on solutions, clinical workflow design and testing, and providing guidance on best practices. - Develop concise Clinical Design Documentation outlining workflows and recommendations for each clinical area. - Contribute to creating and maintaining process-related best practices, training materials, and documentation. - Identify clinical risks and assist in developing risk mitigation strategies. - Collaborate with Clinical Informatics Analyst to enhance existing workflows using digital solutions. - Offer implementation and post-implementation support. - Willingness to travel and work on-site at various healthcare facilities. - Engage with IT and clinical leadership and staff. - Perform other duties as assigned. Qualifications: - Preferred: Nursing degree or equivalent extensive clinical operations experience (Nursing, Radiologist etc) - Previous or current clinical or operational experience required. - Expertise in clinical workflows in major acute care hospital settings. - Credibility in the clinical environment. - Ability to translate clinical terminology and processes into layman's terms for non-clinical colleagues. - Excellent communication skills and ability to network with clinical peers and team members. - Capable of leading or participating in cross-functional teams. - Familiarity with acute care hospital information technologies preferred. - Knowledge of healthcare policies and regulations, such as NHS guidelines and information governance, preferred. - Familiarity with product management and software development life cycle preferred but not required. - Strong writing skills to document clinical analysis and recommendations clearly. This is an excellent opportunity to move into a full time digital career using your extensive clinical background. This is a remote role with some onsite work for meetings with clients 10%-20% of the time with very occasional longer periods, candidates require excellent communication skills and the ability to interact and direct senior healthcare clients. People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.