We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
20/05/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
Are you looking to join a global, growing organisation that is dedicated to creating a more sustainable future? Our client, a leading player in the manufacturing industry, is seeking a highly skilled and motivated Mechanical Fitter to join their team in Irvine, UK. As a Mechanical Fitter, you will play a crucial role in the Engineering and Maintenance Department, responsible for maintaining and developing production equipment and power plant to the highest standards of safety, accuracy, and efficiency. What you'll do: Play a key role in maintaining and developing production equipment and power plant to the highest standards. Undertake preventative and corrective maintenance routines. Troubleshoot engineering problems related to equipment, machines, and design. Take initiative to expand your technical knowledge and mentor apprentices. Participate in an on-call schedule and be prepared to work overtime as required. Flexible working hours depending on operational needs. Who you are: Completed a recognised apprenticeship in a mechanical discipline, ideally with an HNC in Mechanical Engineering. Experience and knowledge in safely maintaining hydraulics, pneumatics, bearing fitting, alignment, and pumping systems. Competent in maintenance management systems and general maintenance, including fault diagnosis, troubleshooting, and repair. Strong communication skills and the ability to work both independently and as part of a team. Committed, organised, and able to manage responsibilities efficiently. This is what our client offers for you: Attractive benefits package, including competitive salary, bonus, pension scheme, and generous holiday allowance. A meaningful job that contributes to a more sustainable future beyond fossils. A caring community with a great team spirit and a commitment to work-life balance. Development opportunities within an international organisation that values personal growth. A responsible employer committed to sustainability, diversity, and inclusivity. Additional information: Are you ready to seize this exciting opportunity? We look forward to receiving your application. Join our client, an industry leader in manufacturing, and be a part of their mission to create a sustainable tomorrow. Apply now and take the next step in your career! Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you.
20/05/2024
Full time
Are you looking to join a global, growing organisation that is dedicated to creating a more sustainable future? Our client, a leading player in the manufacturing industry, is seeking a highly skilled and motivated Mechanical Fitter to join their team in Irvine, UK. As a Mechanical Fitter, you will play a crucial role in the Engineering and Maintenance Department, responsible for maintaining and developing production equipment and power plant to the highest standards of safety, accuracy, and efficiency. What you'll do: Play a key role in maintaining and developing production equipment and power plant to the highest standards. Undertake preventative and corrective maintenance routines. Troubleshoot engineering problems related to equipment, machines, and design. Take initiative to expand your technical knowledge and mentor apprentices. Participate in an on-call schedule and be prepared to work overtime as required. Flexible working hours depending on operational needs. Who you are: Completed a recognised apprenticeship in a mechanical discipline, ideally with an HNC in Mechanical Engineering. Experience and knowledge in safely maintaining hydraulics, pneumatics, bearing fitting, alignment, and pumping systems. Competent in maintenance management systems and general maintenance, including fault diagnosis, troubleshooting, and repair. Strong communication skills and the ability to work both independently and as part of a team. Committed, organised, and able to manage responsibilities efficiently. This is what our client offers for you: Attractive benefits package, including competitive salary, bonus, pension scheme, and generous holiday allowance. A meaningful job that contributes to a more sustainable future beyond fossils. A caring community with a great team spirit and a commitment to work-life balance. Development opportunities within an international organisation that values personal growth. A responsible employer committed to sustainability, diversity, and inclusivity. Additional information: Are you ready to seize this exciting opportunity? We look forward to receiving your application. Join our client, an industry leader in manufacturing, and be a part of their mission to create a sustainable tomorrow. Apply now and take the next step in your career! Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you.
Senior Engineer, Flexible Pipe - 12 Months - Inside - 10x per month in office Responsibilities: Preparing all the technical documentation related to unbonded flexible pipes during the different phases of the Project, such as Conceptual Study, FEED, Tender and Contract package and preparation. Follow-up large EPCI contracts for Offshore Projects for unbonded flexible pipe systems during tender and execution. Ensure that the design of unbonded flexible pipe systems meet Project requirements, applicable codes and standards, and engineering best practices. Follow up supplier call for tender & selection (qualifications, clarifications, recommendations, etc.) Review and approve FEED, tender and Detailed Engineering performed by Contractors. Act as Company Representative for all the activities related to unbonded flexible pipe systems fabrication and testing activities. Act as Company Representative during offshore flexible pipe installation onboard installation vessel. Work and collaborate with other colleagues in the Subsea Systems department, as well as other disciplines. Be aware of design standard requirements for unbonded flexible pipe and correctly apply the internal Company standards HSEQ policies Experience required: Experience in the technical design of unbonded flexible flowlines & risers and associated ancillaries from preliminary engineering through detailed design, with knowledge of the main topsides, subsea and installation interfaces. Experience with Design and Safety Reviews, HAZOP, HAZID's, Risk Assessment. Experience of supervising Contractors and Vendors equipment and deliverables. Experience in being able to support Projects onshore and offshore testing - FAT, SIT and pre-commissioning/installation/commissioning activities. Be familiar with the relevant international codes and subsea standards for Flexible pipes, in particular API17J, API17L1, API17B, and API17K. Minimum BS Degree in Mechanical Engineering or other related Engineering discipline. Demonstrable experience with flexible pipes from preliminary engineering through detailed design. Proficient usage of Microsoft Office Software. Basic knowledge of AutoCad. Knowledge of Mechanical Finite Analysis software (ie Ansys, Abaqus, Cosmosworks). Knowledge of Dynamic analysis software (ie Orcaflex) ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
20/05/2024
Project-based
Senior Engineer, Flexible Pipe - 12 Months - Inside - 10x per month in office Responsibilities: Preparing all the technical documentation related to unbonded flexible pipes during the different phases of the Project, such as Conceptual Study, FEED, Tender and Contract package and preparation. Follow-up large EPCI contracts for Offshore Projects for unbonded flexible pipe systems during tender and execution. Ensure that the design of unbonded flexible pipe systems meet Project requirements, applicable codes and standards, and engineering best practices. Follow up supplier call for tender & selection (qualifications, clarifications, recommendations, etc.) Review and approve FEED, tender and Detailed Engineering performed by Contractors. Act as Company Representative for all the activities related to unbonded flexible pipe systems fabrication and testing activities. Act as Company Representative during offshore flexible pipe installation onboard installation vessel. Work and collaborate with other colleagues in the Subsea Systems department, as well as other disciplines. Be aware of design standard requirements for unbonded flexible pipe and correctly apply the internal Company standards HSEQ policies Experience required: Experience in the technical design of unbonded flexible flowlines & risers and associated ancillaries from preliminary engineering through detailed design, with knowledge of the main topsides, subsea and installation interfaces. Experience with Design and Safety Reviews, HAZOP, HAZID's, Risk Assessment. Experience of supervising Contractors and Vendors equipment and deliverables. Experience in being able to support Projects onshore and offshore testing - FAT, SIT and pre-commissioning/installation/commissioning activities. Be familiar with the relevant international codes and subsea standards for Flexible pipes, in particular API17J, API17L1, API17B, and API17K. Minimum BS Degree in Mechanical Engineering or other related Engineering discipline. Demonstrable experience with flexible pipes from preliminary engineering through detailed design. Proficient usage of Microsoft Office Software. Basic knowledge of AutoCad. Knowledge of Mechanical Finite Analysis software (ie Ansys, Abaqus, Cosmosworks). Knowledge of Dynamic analysis software (ie Orcaflex) ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
Are you eager to be part of a global, growing organisation that is leading the way in developing renewable alternatives to fossil-based materials? Our client, an industry leader in the manufacturing sector, is looking for a talented Engineering Compliance Technician to join their team in Irvine. This is an exciting opportunity to contribute to the maintenance and development of their plant and equipment, ensuring the highest standards of accuracy and reliability. As an Engineering Compliance Technician, you will play a vital role in meeting all statutory and legislative engineering testing and inspections, including the Pressure Systems Safety Regulations 2000 (PSSR), Lifting Operations and Lifting Equipment Regulations (LOLER), and Hand-Arm Vibration Syndrome (HAVS). Your responsibilities will also include supporting the Mechanical Technicians/Planners within the organisation, undertaking general maintenance tasks, mentoring apprentices, and planning/scheduling work. To be successful in this role, you must have completed a recognised mechanical apprenticeship and hold at least an HNC-level qualification. Safety-conscious, self-motivated, and detail-oriented, you possess excellent communication skills and are comfortable working both independently and as part of a team. Prior experience with PSSR, LOLER, or HAVS would be advantageous, but training will be provided. Additionally, you should be comfortable managing contractors and liaising with regulatory bodies. Key Requirements + Duties: Plan and schedule the test, inspection, and maintenance programme in accordance with legislative requirements. Ensure all test documentation is valid and traceable within the system. Deliver planned and corrective actions in a timely manner, adhering to legislative requirements. Produce and update safe systems of work, risk assessments, and interpret written schemes of examination. Commitment to all safety protocols and procedures. Ability to interpret technical drawings and specifications. Collaborate effectively with engineering and production personnel. Utilise the maintenance management system as required. Participate in an engineering call out rota. Core hours will be 37.5 hrs per week, Monday to Friday, with a flexible approach depending on operational needs. In return, our client offers an attractive benefits package, including a competitive salary, bonus, and pension scheme. You will also enjoy 25 days of annual leave plus statutory days, a free on-site gym, an Employee Assistance Programme, an employee retail discount scheme, and more. As part of a caring community, you will have opportunities for personal and professional growth within a responsible, sustainable organisation that values diversity and inclusivity. If this opportunity excites you, don't hesitate to submit your application Please note that our client is an industry-leading manufacturing organisation based in Irvine, Ayrshire, with a strong reputation for providing high-quality employment and development opportunities for over 35 years. Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you.
20/05/2024
Full time
Are you eager to be part of a global, growing organisation that is leading the way in developing renewable alternatives to fossil-based materials? Our client, an industry leader in the manufacturing sector, is looking for a talented Engineering Compliance Technician to join their team in Irvine. This is an exciting opportunity to contribute to the maintenance and development of their plant and equipment, ensuring the highest standards of accuracy and reliability. As an Engineering Compliance Technician, you will play a vital role in meeting all statutory and legislative engineering testing and inspections, including the Pressure Systems Safety Regulations 2000 (PSSR), Lifting Operations and Lifting Equipment Regulations (LOLER), and Hand-Arm Vibration Syndrome (HAVS). Your responsibilities will also include supporting the Mechanical Technicians/Planners within the organisation, undertaking general maintenance tasks, mentoring apprentices, and planning/scheduling work. To be successful in this role, you must have completed a recognised mechanical apprenticeship and hold at least an HNC-level qualification. Safety-conscious, self-motivated, and detail-oriented, you possess excellent communication skills and are comfortable working both independently and as part of a team. Prior experience with PSSR, LOLER, or HAVS would be advantageous, but training will be provided. Additionally, you should be comfortable managing contractors and liaising with regulatory bodies. Key Requirements + Duties: Plan and schedule the test, inspection, and maintenance programme in accordance with legislative requirements. Ensure all test documentation is valid and traceable within the system. Deliver planned and corrective actions in a timely manner, adhering to legislative requirements. Produce and update safe systems of work, risk assessments, and interpret written schemes of examination. Commitment to all safety protocols and procedures. Ability to interpret technical drawings and specifications. Collaborate effectively with engineering and production personnel. Utilise the maintenance management system as required. Participate in an engineering call out rota. Core hours will be 37.5 hrs per week, Monday to Friday, with a flexible approach depending on operational needs. In return, our client offers an attractive benefits package, including a competitive salary, bonus, and pension scheme. You will also enjoy 25 days of annual leave plus statutory days, a free on-site gym, an Employee Assistance Programme, an employee retail discount scheme, and more. As part of a caring community, you will have opportunities for personal and professional growth within a responsible, sustainable organisation that values diversity and inclusivity. If this opportunity excites you, don't hesitate to submit your application Please note that our client is an industry-leading manufacturing organisation based in Irvine, Ayrshire, with a strong reputation for providing high-quality employment and development opportunities for over 35 years. Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you.
Job Vacancy: Multi Skilled Maintenance Engineer Location: Loughborough Salary: Up to £48,000 Shift pattern: 12 hour shift, Alternating Days and Nights on a 3 week rolling pattern. We are seeking a highly skilled and adaptable Multi Skilled Maintenance Engineer for a prestigious FMCG company based in Loughborough. As a leading recruitment consultancy, we are collaborating with our client to fill this pivotal role within their organization. Key Responsibilities: Flexibility and Safety: The successful candidate will be expected to work flexibly to meet business demands while adhering to the highest standards of Good Manufacturing Practice (GMP) to ensure a safe working environment. Subject Matter Expertise: This role demands a commitment to continuously learn and adapt to evolving technologies, becoming the Subject Matter Expert (SME) in all facets of Manufacturing and Packaging equipment. Maintenance and Repair: Proficiency in fault finding, repair, and maintenance of process supply equipment and production-aligned ancillary equipment. This includes Planned, Preventative, Predictive, and Reactive maintenance on complex Mechanical, electro/Mechanical systems and process equipment, encompassing Programmable Logic Controllers (PLC), electrical, electronic, and pneumatic controls within a pharmaceutical environment. Drive for Improvement: Actively pursuing enhancements in safety, GMP, and performance within the module. Taking charge of Conditional Appraisals and Criticality Assessment activity to minimize costly breakdowns, enhance production and supporting equipment, and implement strategies to improve overall safety and reliability of plant and production processes. Requirements: A proven track record in a similar role within an FMCG or related industry. Technical proficiency in maintenance, repair, and fault finding in complex machinery and equipment. Experience working with PLCs, electrical, electronic, and pneumatic controls. Proactive approach to problem-solving and a drive for continuous improvement. Ability to work in a shift pattern including 12-hour shifts comprising a mix of days and nights. This is a fantastic opportunity for an individual looking to make a significant impact within a fast-paced and dynamic environment. The successful candidate will receive a competitive salary of up to £48,000 commensurate with their experience and skills. Benefits include: 6.5% bonus, occasional overtime paid at x1.5 or double time for nights and 17 days of Flexible holidays. If you believe you possess the skills and expertise required for this role and are enthusiastic about making a difference in the FMCG industry, please apply with your updated CV. We are looking forward to discussing this exciting opportunity further with you.
20/05/2024
Full time
Job Vacancy: Multi Skilled Maintenance Engineer Location: Loughborough Salary: Up to £48,000 Shift pattern: 12 hour shift, Alternating Days and Nights on a 3 week rolling pattern. We are seeking a highly skilled and adaptable Multi Skilled Maintenance Engineer for a prestigious FMCG company based in Loughborough. As a leading recruitment consultancy, we are collaborating with our client to fill this pivotal role within their organization. Key Responsibilities: Flexibility and Safety: The successful candidate will be expected to work flexibly to meet business demands while adhering to the highest standards of Good Manufacturing Practice (GMP) to ensure a safe working environment. Subject Matter Expertise: This role demands a commitment to continuously learn and adapt to evolving technologies, becoming the Subject Matter Expert (SME) in all facets of Manufacturing and Packaging equipment. Maintenance and Repair: Proficiency in fault finding, repair, and maintenance of process supply equipment and production-aligned ancillary equipment. This includes Planned, Preventative, Predictive, and Reactive maintenance on complex Mechanical, electro/Mechanical systems and process equipment, encompassing Programmable Logic Controllers (PLC), electrical, electronic, and pneumatic controls within a pharmaceutical environment. Drive for Improvement: Actively pursuing enhancements in safety, GMP, and performance within the module. Taking charge of Conditional Appraisals and Criticality Assessment activity to minimize costly breakdowns, enhance production and supporting equipment, and implement strategies to improve overall safety and reliability of plant and production processes. Requirements: A proven track record in a similar role within an FMCG or related industry. Technical proficiency in maintenance, repair, and fault finding in complex machinery and equipment. Experience working with PLCs, electrical, electronic, and pneumatic controls. Proactive approach to problem-solving and a drive for continuous improvement. Ability to work in a shift pattern including 12-hour shifts comprising a mix of days and nights. This is a fantastic opportunity for an individual looking to make a significant impact within a fast-paced and dynamic environment. The successful candidate will receive a competitive salary of up to £48,000 commensurate with their experience and skills. Benefits include: 6.5% bonus, occasional overtime paid at x1.5 or double time for nights and 17 days of Flexible holidays. If you believe you possess the skills and expertise required for this role and are enthusiastic about making a difference in the FMCG industry, please apply with your updated CV. We are looking forward to discussing this exciting opportunity further with you.
Mechanical Technician, fitter - Aircraft, aerospace, aviation Contract, immediate with 6 monthly extensions £competitive hourly rate Fitter, technician, mechanical, aircraft, aviation, aerospace As an Aircraft Mechanical Technician, you will be build, commission and test aircraft and related sub-systems. You will also assist with the complete development of test rigs and supporting flight test programmes. Requirements: Proven experience within aircraft/aviation maintenance/overhaul educational background in aerospace or aviation/wider engineering accreditations Good knowledge of structural production techniques, repairs & composites. Knowledge of electrical systems (HV) & aircraft/maintenance documentation (beneficial). Commercial or military aircraft experience. For a full consultation and to be considered, please apply with your up to date CV and contact details.
20/05/2024
Project-based
Mechanical Technician, fitter - Aircraft, aerospace, aviation Contract, immediate with 6 monthly extensions £competitive hourly rate Fitter, technician, mechanical, aircraft, aviation, aerospace As an Aircraft Mechanical Technician, you will be build, commission and test aircraft and related sub-systems. You will also assist with the complete development of test rigs and supporting flight test programmes. Requirements: Proven experience within aircraft/aviation maintenance/overhaul educational background in aerospace or aviation/wider engineering accreditations Good knowledge of structural production techniques, repairs & composites. Knowledge of electrical systems (HV) & aircraft/maintenance documentation (beneficial). Commercial or military aircraft experience. For a full consultation and to be considered, please apply with your up to date CV and contact details.
FIELD SERVICE ENGINEER Covering UK&IRE £40,000 - £50,000 + Excellent benefits Monday - Friday - door to door (44 hours) One of the UK's leading suppliers of highly complex process sterilisation and quality process equipment is now recruiting for a Field Service Engineer to join their busy and expanding field service engineering team to cover UK&IRE. As the field service engineer, you will be required to travel to customer sites in the pharmaceutical and life-sciences field, carrying out repair and maintenance on a diverse range of technologies including autoclaves/sterilisers, RO systems, steam generators etc. Key responsibilities as the Field Service Engineer: You will be required to travel across the UK and Ireland and will include nights away from home. Provide preventative maintenance, calibration and technical support, to a standard consistent with the high quality of the equipment and services the organisation supply and with the reasonable expectations of the customers. Undertake fault finding/rectification assignments as delegated by the management team Creating, preparing and managing servicing and calibration documentation as delegated by the management team Managing specific service spares Role specific administration such as reporting, expenses, and time sheets Proper management of the organisations equipment, including test equipment, computer equipment etc. Support the training of other Field Service Engineers Provide FAT support as required. Additional administrative duties as required, including but not limited to, protocol review, document creation as per QMS. Adhering to policies and procedures at all times Experience required - Field Service Engineer: ONC/HNC or equivalent in engineering (mechanical, electrical, electronic etc.) Multi-skilled engineer who has carried out service, repair and maintenance on industrial sized electro-mechanical machinery Industry background could be; FMCG, Ex-Military (Navy, REME, RAF etc.), Automation, Robotics, Pharmaceutical, Biotechnology, Semi-Conductor, Oil & Gas etc. Flexible to travel and stay away as and when required as a field service engineer Valid, UK driving licence Package/benefits: £40,000 - £50,000 depending on experience Company performance bonus Paid overtime x1.5 - Monday Friday any hours over 44 hrs (door to door travel) Overnight stay allowance - £20 for first night away raising an extra £10 per night for consecutive nights (Capped at £110/night). Once fully out on your own - Night 1-4 -£62 p/n, nights 5-7 - £80 p/n, nights 8 onwards is £100p/n. Lunch allowance Company vehicle included for personal use or the option for business use only Company Pension scheme 25 dyas holiday + bank Company phone & laptop Tools and uniform supplied Annual salary reviews (linked to inflation) plus continuously review salary in relation to performance. If you are and experienced multi-skilled field service engineer interested in making an application, please click APPLY NOW and a CBSbutler representative will be in touch to discuss this exciting opportunity.
20/05/2024
Full time
FIELD SERVICE ENGINEER Covering UK&IRE £40,000 - £50,000 + Excellent benefits Monday - Friday - door to door (44 hours) One of the UK's leading suppliers of highly complex process sterilisation and quality process equipment is now recruiting for a Field Service Engineer to join their busy and expanding field service engineering team to cover UK&IRE. As the field service engineer, you will be required to travel to customer sites in the pharmaceutical and life-sciences field, carrying out repair and maintenance on a diverse range of technologies including autoclaves/sterilisers, RO systems, steam generators etc. Key responsibilities as the Field Service Engineer: You will be required to travel across the UK and Ireland and will include nights away from home. Provide preventative maintenance, calibration and technical support, to a standard consistent with the high quality of the equipment and services the organisation supply and with the reasonable expectations of the customers. Undertake fault finding/rectification assignments as delegated by the management team Creating, preparing and managing servicing and calibration documentation as delegated by the management team Managing specific service spares Role specific administration such as reporting, expenses, and time sheets Proper management of the organisations equipment, including test equipment, computer equipment etc. Support the training of other Field Service Engineers Provide FAT support as required. Additional administrative duties as required, including but not limited to, protocol review, document creation as per QMS. Adhering to policies and procedures at all times Experience required - Field Service Engineer: ONC/HNC or equivalent in engineering (mechanical, electrical, electronic etc.) Multi-skilled engineer who has carried out service, repair and maintenance on industrial sized electro-mechanical machinery Industry background could be; FMCG, Ex-Military (Navy, REME, RAF etc.), Automation, Robotics, Pharmaceutical, Biotechnology, Semi-Conductor, Oil & Gas etc. Flexible to travel and stay away as and when required as a field service engineer Valid, UK driving licence Package/benefits: £40,000 - £50,000 depending on experience Company performance bonus Paid overtime x1.5 - Monday Friday any hours over 44 hrs (door to door travel) Overnight stay allowance - £20 for first night away raising an extra £10 per night for consecutive nights (Capped at £110/night). Once fully out on your own - Night 1-4 -£62 p/n, nights 5-7 - £80 p/n, nights 8 onwards is £100p/n. Lunch allowance Company vehicle included for personal use or the option for business use only Company Pension scheme 25 dyas holiday + bank Company phone & laptop Tools and uniform supplied Annual salary reviews (linked to inflation) plus continuously review salary in relation to performance. If you are and experienced multi-skilled field service engineer interested in making an application, please click APPLY NOW and a CBSbutler representative will be in touch to discuss this exciting opportunity.
*Hybrid, 3 days onsite, 2 days remote* *We are unable to sponsor as this is a permanent Full time role* A prestigious company is looking for a Sr. .NET Product Engineer. This engineer will be doing full stack custom application development. They will work with .Net, C#, MVC, Javascript, jQuery, HTML 5, etc. Responsibilities: The Sr .NET Product Engineer I is responsible for delivering custom business solutions using the Microsoft technology stack. The individual will drive the design and development of user interfaces, business objectives and overall infrastructure. Analyze, design, configure, develop and implement intermediate-level solutions to meet business needs and objectives. Provide Level 3 support. Investigates operational or systematic problems and provides resolution using intermediate analytical skills and tools as necessary. Prepare project proposals and develop project plans. May lead small projects. Maintain up-to-date awareness of current and future directions of business industry and associated technologies. Investigate and document present procedures as liaison with user departments. May develop and maintain application security, design and documentation according to legal compliance requirements. Qualifications & Requirements A Bachelor's Degree is preferred in mechanical, computer, or electrical engineering discipline. 8 plus years of software development experience with 6 plus years of web-based software development in .NET technologies (C#, .NET Framework, .NET Core, Docker, MVC, SQL Server). Prior experience developing MSOffice add-Ins in Word, Outlook and Excel Prior experience with ASP.NET MVC (versions 4 and up), .NET Core, WCF, Restful services, JavaScript, jQuery, HTML5/CSS3, React, responsive design, and Dependency Injection frameworks are desired. Experience with ORM with different tools such as Entity Framework and LINQ. Experience working with container-based solutions Experience with continuous integration with Azure DevOps, Git (or similar). Should have strong understanding of SOA, TDD, SOLID principles, and systems architecture concepts. Must be familiar with agile or other iterative development methodologies. Technologies/Software Must understand Microsoft Windows Operating system architecture Must understand Microsoft Windows Office System Ability to participate in all aspects of application SDLC including Agile methodologies Must have experience the Microsoft Visual Studio and ADO Must participate in daily team scrums and code reviews Must understand Microsoft SQL Server Microsoft Visual Studio 2019/2021 Azure DevOps .NET Framework, .NET Core, Rest API services, WCF Services C#, VB.NET, JQuery, JavaScript, Typescript, React, LINQ, HTML5, CSS3, Bootstrap SQL Server, PostgreSQL Docker MVC Framework Entity Framework Knowledge of SOA (Service Oriented Architecture) and N-Tier Architecture.
17/05/2024
Full time
*Hybrid, 3 days onsite, 2 days remote* *We are unable to sponsor as this is a permanent Full time role* A prestigious company is looking for a Sr. .NET Product Engineer. This engineer will be doing full stack custom application development. They will work with .Net, C#, MVC, Javascript, jQuery, HTML 5, etc. Responsibilities: The Sr .NET Product Engineer I is responsible for delivering custom business solutions using the Microsoft technology stack. The individual will drive the design and development of user interfaces, business objectives and overall infrastructure. Analyze, design, configure, develop and implement intermediate-level solutions to meet business needs and objectives. Provide Level 3 support. Investigates operational or systematic problems and provides resolution using intermediate analytical skills and tools as necessary. Prepare project proposals and develop project plans. May lead small projects. Maintain up-to-date awareness of current and future directions of business industry and associated technologies. Investigate and document present procedures as liaison with user departments. May develop and maintain application security, design and documentation according to legal compliance requirements. Qualifications & Requirements A Bachelor's Degree is preferred in mechanical, computer, or electrical engineering discipline. 8 plus years of software development experience with 6 plus years of web-based software development in .NET technologies (C#, .NET Framework, .NET Core, Docker, MVC, SQL Server). Prior experience developing MSOffice add-Ins in Word, Outlook and Excel Prior experience with ASP.NET MVC (versions 4 and up), .NET Core, WCF, Restful services, JavaScript, jQuery, HTML5/CSS3, React, responsive design, and Dependency Injection frameworks are desired. Experience with ORM with different tools such as Entity Framework and LINQ. Experience working with container-based solutions Experience with continuous integration with Azure DevOps, Git (or similar). Should have strong understanding of SOA, TDD, SOLID principles, and systems architecture concepts. Must be familiar with agile or other iterative development methodologies. Technologies/Software Must understand Microsoft Windows Operating system architecture Must understand Microsoft Windows Office System Ability to participate in all aspects of application SDLC including Agile methodologies Must have experience the Microsoft Visual Studio and ADO Must participate in daily team scrums and code reviews Must understand Microsoft SQL Server Microsoft Visual Studio 2019/2021 Azure DevOps .NET Framework, .NET Core, Rest API services, WCF Services C#, VB.NET, JQuery, JavaScript, Typescript, React, LINQ, HTML5, CSS3, Bootstrap SQL Server, PostgreSQL Docker MVC Framework Entity Framework Knowledge of SOA (Service Oriented Architecture) and N-Tier Architecture.
Mechanical Engineer/Aerospace Engineer - Aerospace Testing Equipment, Wind Tunnels, Force Measurement & Positioning Systems; Bespoke Mechanical Engineering, Design, Hands-on Assembly, Installation; FEA, CAE from: Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc. Permanent, East Sussex, Onsite. C.£60k + Bonus. Specialist Engineering firm with 30 year trading history and a leading position within the Wind Tunnel/Airflow Testing Solutions marketplace seek Mechanical Engineer to join the business and play a lead role within the team. With the majority of their clients operating within the Aerospace, Motorsport and Defence sectors the company delivers bespoke engineering solutions to clients across the globe. A wide range of wind/air flow testing solutions are offered within their product range with each actual delivery being bespoke in nature. The Mechanical Engineer/Aerospace Engineer will work in a lead capacity and within the full life cycle. This will require the design of the solution using 3D CAE tools such as Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc, liaison with the fabricators and then the subsequent (hands-on) build and assembly of the systems either in the company's factory environment and/or onsite anywhere in the world. You will plan complex engineering projects, design solutions/oversee solutions designed by the team, play a key role in the assembly and installation but also solve problems as they arise and advise on appropriate methods and solutions to improve the end product. This will require both leadership of the team, engagement with senior management, project management capability as well as engagement with customers within some of the worlds' leading organisations within the Aerospace, Automotive, Motorsport and Defence sectors. We are searching for an experienced Mechanical Engineer/Aerospace Engineer who possesses many years' experience in the full life cycle of aeronautical/motion control/electromechanical engineering fields where you will have gained experience in in 2D and 3D CAE with either Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc. You will be a hands-on Engineer with experience of machined components to tight tolerances; large, welded fabrications. You will be comfortable with the concepts of FEA (Finite Element Analysis). Leadership, Project Management, Client Engagement and an overall keen eye for detail will all be expected and in return you will have the opportunity to deliver first class systems for some of the world's leading companies. Excellent communication skills will be required. SC clearance required/to be undertaken on appointment. This is an exceptional opportunity to join a well-established, leading specialist engineering company with exciting global prospects. Due to the hands-on nature of this role we require someone who can work Full Time, onsite at the company's facility in rural East Sussex. You will need to be in possession of a full driving license and car as the offices and assembly centre are not within walking distance of the mainline train station. The location is easily commutable (by car) from areas including Eastbourne, Hailsham, Hastings, Uckfield East Sussex; Tunbridge Wells, Sevenoaks, Kent; East Grinstead, Crawley West Sussex; Horley, Redhill, Surrey.
17/05/2024
Full time
Mechanical Engineer/Aerospace Engineer - Aerospace Testing Equipment, Wind Tunnels, Force Measurement & Positioning Systems; Bespoke Mechanical Engineering, Design, Hands-on Assembly, Installation; FEA, CAE from: Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc. Permanent, East Sussex, Onsite. C.£60k + Bonus. Specialist Engineering firm with 30 year trading history and a leading position within the Wind Tunnel/Airflow Testing Solutions marketplace seek Mechanical Engineer to join the business and play a lead role within the team. With the majority of their clients operating within the Aerospace, Motorsport and Defence sectors the company delivers bespoke engineering solutions to clients across the globe. A wide range of wind/air flow testing solutions are offered within their product range with each actual delivery being bespoke in nature. The Mechanical Engineer/Aerospace Engineer will work in a lead capacity and within the full life cycle. This will require the design of the solution using 3D CAE tools such as Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc, liaison with the fabricators and then the subsequent (hands-on) build and assembly of the systems either in the company's factory environment and/or onsite anywhere in the world. You will plan complex engineering projects, design solutions/oversee solutions designed by the team, play a key role in the assembly and installation but also solve problems as they arise and advise on appropriate methods and solutions to improve the end product. This will require both leadership of the team, engagement with senior management, project management capability as well as engagement with customers within some of the worlds' leading organisations within the Aerospace, Automotive, Motorsport and Defence sectors. We are searching for an experienced Mechanical Engineer/Aerospace Engineer who possesses many years' experience in the full life cycle of aeronautical/motion control/electromechanical engineering fields where you will have gained experience in in 2D and 3D CAE with either Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc. You will be a hands-on Engineer with experience of machined components to tight tolerances; large, welded fabrications. You will be comfortable with the concepts of FEA (Finite Element Analysis). Leadership, Project Management, Client Engagement and an overall keen eye for detail will all be expected and in return you will have the opportunity to deliver first class systems for some of the world's leading companies. Excellent communication skills will be required. SC clearance required/to be undertaken on appointment. This is an exceptional opportunity to join a well-established, leading specialist engineering company with exciting global prospects. Due to the hands-on nature of this role we require someone who can work Full Time, onsite at the company's facility in rural East Sussex. You will need to be in possession of a full driving license and car as the offices and assembly centre are not within walking distance of the mainline train station. The location is easily commutable (by car) from areas including Eastbourne, Hailsham, Hastings, Uckfield East Sussex; Tunbridge Wells, Sevenoaks, Kent; East Grinstead, Crawley West Sussex; Horley, Redhill, Surrey.
Wireperson | Stone (Staffordshire) | £27,000 pa | Fully on-site | NVQ 1 + Level Needed Yolk Recruitment are working with a market leader in advanced system integration within the energy sector. They're investing heavily in their Stone site and are looking for an experienced Wireperson to join their energy division. If successful you will join an experienced team working within the Electrical control wire assembly and test team working across a variety of small and large scale projects for clients within the energy industry. Due to the industry you will need to be eligible for BPSS clearance. This is what you will be doing: The assembly and wiring of electrical components, of varying size and complexity using drawings, parts lists and specifications Mechanical assembly of cubicles and framework Bench assembly of electrical sub-assemblies Quality of own work and rework identified during inspection and test Working to agreed on company standards and procedures Completion of assembly record cards to ensure traceability and identification of serial numbered components Updating electronic issues log and communicating directly with responsible design engineers The experience you will bring to the team: At least 2 years experience Ability to read and understand electrical schematic drawings Ability to manage your time to successfully complete all assigned tasks within agreed timescales Experience leading a production Bay to ensure everyone within that Bay is working to the correct standards Experience completing assembly record cards. What you will receive in return: Private medical insurance Attractive pension package 25 days holiday (bank holidays on top) Flexible working options
17/05/2024
Full time
Wireperson | Stone (Staffordshire) | £27,000 pa | Fully on-site | NVQ 1 + Level Needed Yolk Recruitment are working with a market leader in advanced system integration within the energy sector. They're investing heavily in their Stone site and are looking for an experienced Wireperson to join their energy division. If successful you will join an experienced team working within the Electrical control wire assembly and test team working across a variety of small and large scale projects for clients within the energy industry. Due to the industry you will need to be eligible for BPSS clearance. This is what you will be doing: The assembly and wiring of electrical components, of varying size and complexity using drawings, parts lists and specifications Mechanical assembly of cubicles and framework Bench assembly of electrical sub-assemblies Quality of own work and rework identified during inspection and test Working to agreed on company standards and procedures Completion of assembly record cards to ensure traceability and identification of serial numbered components Updating electronic issues log and communicating directly with responsible design engineers The experience you will bring to the team: At least 2 years experience Ability to read and understand electrical schematic drawings Ability to manage your time to successfully complete all assigned tasks within agreed timescales Experience leading a production Bay to ensure everyone within that Bay is working to the correct standards Experience completing assembly record cards. What you will receive in return: Private medical insurance Attractive pension package 25 days holiday (bank holidays on top) Flexible working options
Required for a 12 month initial contract working for a next-gen Li-ion battery manufacturer, a Compliance Specialist to ensure battery systems meet all relevant legislative and market-specific standards to facilitate global market access. Responsibilities: - Identify and interpret regulatory requirements for battery system products to ensure compliance. - Work with engineering teams to derive product requirements and integrate these requirements into our Requirements Management tool. - Regularly update and communicate changes in compliance standards to engineering teams. - Collaborate with engineering, business development, and technical project managers to research and validate regulatory requirements. - Manage documentation and certifications necessary for compliance, including interfacing with third-party test labs and certification bodies. - Act as the primary contact for certification bodies and maintain strategic compliance alignment. - Serve as the main point of contact for internal and external technical experts on compliance issues. Experience: - 5-10 years of relevant or similar experience - Technically proficient in areas of Electrical and Mechanical engineering - Preferably experience in applying current European and American Directives/Standards for Lithium-ion battery products. - Experience in certification of products within and outside Europe - Excellent English written and oral communication skills, with experience of delivery to a variety of internal and external stakeholders of varying seniorities. - Ability to work under high pressure and tight deadlines, excellent time management. To arrange a Teams interview, please email in the first instance your CV to (see below) WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
17/05/2024
Project-based
Required for a 12 month initial contract working for a next-gen Li-ion battery manufacturer, a Compliance Specialist to ensure battery systems meet all relevant legislative and market-specific standards to facilitate global market access. Responsibilities: - Identify and interpret regulatory requirements for battery system products to ensure compliance. - Work with engineering teams to derive product requirements and integrate these requirements into our Requirements Management tool. - Regularly update and communicate changes in compliance standards to engineering teams. - Collaborate with engineering, business development, and technical project managers to research and validate regulatory requirements. - Manage documentation and certifications necessary for compliance, including interfacing with third-party test labs and certification bodies. - Act as the primary contact for certification bodies and maintain strategic compliance alignment. - Serve as the main point of contact for internal and external technical experts on compliance issues. Experience: - 5-10 years of relevant or similar experience - Technically proficient in areas of Electrical and Mechanical engineering - Preferably experience in applying current European and American Directives/Standards for Lithium-ion battery products. - Experience in certification of products within and outside Europe - Excellent English written and oral communication skills, with experience of delivery to a variety of internal and external stakeholders of varying seniorities. - Ability to work under high pressure and tight deadlines, excellent time management. To arrange a Teams interview, please email in the first instance your CV to (see below) WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
Panels Structures Assembly Technician £23.82 per hour. Umbrella. Stevenage - 5 days onsite. Certain Advantage is hiring for a Panels Structures Assembly Technician based in Stevenage. This role is on a 6-month contract basis and is office based. Working within the operations team to consistently produce items which conform to all quality requirements in accordance with the production plan. Does this sound like your next career move? If you're ambitious to grow, this may be your next role. The role: Highlight any anomalies and second close non-conformances where applicable, and proactively liaise with the Team Leader/Engineering to update paper works to reflect build sequence and data capture requirements. To work in accordance with LDS (local document system) describing methods and procedures. Complying with standard processes, specific area requirements and health and safety requirements. Promote and follow Cleanroom regulations, local area health and safety requirements and 5S policy within local work areas Ability to read and work to shop floor documentation such as routings, drawing, work instructions and bills of material. Working to the required process standard as dictated by the relevant area skills Matrix. Responsible for the completion of all paperwork relating to the operations undertaken, including traceability stamps and recording any other additional information as required. Reporting and highlighting errors to ME where applicable. Taking progress and reporting to Lead Technician/Team Lead when required. The individual We are looking for people who can show: Previous experience such as Composite manufacturing, mechanical fitter, close tolerance sheet metal worker, time served mechanical technician. Ability to work from detailed drawings and electronic work instructions - within specific procedures. Experience in industries such as Space/Aerospace/Automotive/Motorsport etc. Ability to work in confined spaces above floor level (Working at height) Experience of working within a clean room environment and of being part of a team and leading activities. City and guilds qualification or Btech National Manual Dexterity Does this sound like your next career move? Apply today! (Reference: 73003) Working with Certain Advantage We go the extra mile to find the best people for the job. If you're hunting for a role where you can make an impact and grow your career, we'll work with you to find it. We work with businesses across the UK to find the best people in Finance, Marketing, IT and Engineering.
17/05/2024
Project-based
Panels Structures Assembly Technician £23.82 per hour. Umbrella. Stevenage - 5 days onsite. Certain Advantage is hiring for a Panels Structures Assembly Technician based in Stevenage. This role is on a 6-month contract basis and is office based. Working within the operations team to consistently produce items which conform to all quality requirements in accordance with the production plan. Does this sound like your next career move? If you're ambitious to grow, this may be your next role. The role: Highlight any anomalies and second close non-conformances where applicable, and proactively liaise with the Team Leader/Engineering to update paper works to reflect build sequence and data capture requirements. To work in accordance with LDS (local document system) describing methods and procedures. Complying with standard processes, specific area requirements and health and safety requirements. Promote and follow Cleanroom regulations, local area health and safety requirements and 5S policy within local work areas Ability to read and work to shop floor documentation such as routings, drawing, work instructions and bills of material. Working to the required process standard as dictated by the relevant area skills Matrix. Responsible for the completion of all paperwork relating to the operations undertaken, including traceability stamps and recording any other additional information as required. Reporting and highlighting errors to ME where applicable. Taking progress and reporting to Lead Technician/Team Lead when required. The individual We are looking for people who can show: Previous experience such as Composite manufacturing, mechanical fitter, close tolerance sheet metal worker, time served mechanical technician. Ability to work from detailed drawings and electronic work instructions - within specific procedures. Experience in industries such as Space/Aerospace/Automotive/Motorsport etc. Ability to work in confined spaces above floor level (Working at height) Experience of working within a clean room environment and of being part of a team and leading activities. City and guilds qualification or Btech National Manual Dexterity Does this sound like your next career move? Apply today! (Reference: 73003) Working with Certain Advantage We go the extra mile to find the best people for the job. If you're hunting for a role where you can make an impact and grow your career, we'll work with you to find it. We work with businesses across the UK to find the best people in Finance, Marketing, IT and Engineering.
Principal Mechanical Engineer - Cutting-Edge Engineering Firm Lynx is working with a global engineering company, to recruit a talented Principal Mechanical Engineer to join the team in Hampshire. This is a hybrid role that offers flexibility, competitive pay, and the opportunity to work on innovative projects in the energy sector. Key responsibilities: Spearhead the analysis and design of complex steel structures and storage tanks Utilise advanced software tools, including FEA, to develop cutting-edge designs Collaborate with clients, identify project risks, ensure compliance with quality standards Lead and mentor a team of skilled engineers and CAD technicians Drive continuous improvement in designs, workflows, and company standards Requirements: Degree in a relevant engineering discipline (Masters or PhD preferred)/Chartered Engineer status Minimum 6 years of experience in mechanical or structural engineering, including team leadership Strong knowledge of design codes (Eurocodes, API 620, EN 14620) and proficiency in analysis software (STAAD, ANSYS, CAESAR II, or similar) Excellent problem-solving, communication, and project management skills Ability to thrive in a multi-disciplinary, international team environment Offer Competitive salary up to £60,000 per annum, depending on experience Hybrid working model, providing flexibility and work-life balance Opportunities to lead projects and drive innovation in the industry Supportive, collaborative team environment with opportunities for career growth Comprehensive benefits package Don't miss this chance to join a world-class engineering firm. Apply now!
17/05/2024
Full time
Principal Mechanical Engineer - Cutting-Edge Engineering Firm Lynx is working with a global engineering company, to recruit a talented Principal Mechanical Engineer to join the team in Hampshire. This is a hybrid role that offers flexibility, competitive pay, and the opportunity to work on innovative projects in the energy sector. Key responsibilities: Spearhead the analysis and design of complex steel structures and storage tanks Utilise advanced software tools, including FEA, to develop cutting-edge designs Collaborate with clients, identify project risks, ensure compliance with quality standards Lead and mentor a team of skilled engineers and CAD technicians Drive continuous improvement in designs, workflows, and company standards Requirements: Degree in a relevant engineering discipline (Masters or PhD preferred)/Chartered Engineer status Minimum 6 years of experience in mechanical or structural engineering, including team leadership Strong knowledge of design codes (Eurocodes, API 620, EN 14620) and proficiency in analysis software (STAAD, ANSYS, CAESAR II, or similar) Excellent problem-solving, communication, and project management skills Ability to thrive in a multi-disciplinary, international team environment Offer Competitive salary up to £60,000 per annum, depending on experience Hybrid working model, providing flexibility and work-life balance Opportunities to lead projects and drive innovation in the industry Supportive, collaborative team environment with opportunities for career growth Comprehensive benefits package Don't miss this chance to join a world-class engineering firm. Apply now!
iO Associates have partnered with we specialist defence IT and Engineering company based in London Luton Airport in the search for a Multi Skilled Maintenance Technician. As the Maintenance technician you will be responsible for planned and reactive maintenance of HBS, Arrivals and central search systems at LLA. Working as part of a team with 2 maintenance technicians per 12 hour shift you will be fault finding skills on automated PLC controlled conveyor systems/sortation systems and Helping with preparing fault and monthly system reports. You'll be using your good communication skills with customers and will be reporting and maintenance record keeping via the PPM management system. To be successful for this role you will need: NVQ Level 3/City and Guilds Electrical/Mechanical or Equivalent Multi skilled technician Experience of fault finding on PLC/Scada systems. ( Modicon or Siemens preferred) Fault finding on control panels, network and bus systems Ability to read electrical drawing Good communication skills PC literate with ability to structure and write reports Proven experience of reactive and planned maintenance Checkable 5 year work history DBS The shift pattern is shift is 2 weeks of days, then 2 weeks of nights, 12 hour shifts. Week 1 - Weds and Thursday - Days Week 2 - Mon, Tues and Fri, Sat, Sun - Days Week 3 - Float week to cover sickness and holiday. 2-4 shifts depending on what sick/holiday is on that week. Nights Week 4 - Nights on same days as week 2. The salary is circa.£46,000 including shift allowance. Some overtime could be available. If you meet most of these criteria and you would like to find out more, don't hesitate to get in touch and apply today!
17/05/2024
Full time
iO Associates have partnered with we specialist defence IT and Engineering company based in London Luton Airport in the search for a Multi Skilled Maintenance Technician. As the Maintenance technician you will be responsible for planned and reactive maintenance of HBS, Arrivals and central search systems at LLA. Working as part of a team with 2 maintenance technicians per 12 hour shift you will be fault finding skills on automated PLC controlled conveyor systems/sortation systems and Helping with preparing fault and monthly system reports. You'll be using your good communication skills with customers and will be reporting and maintenance record keeping via the PPM management system. To be successful for this role you will need: NVQ Level 3/City and Guilds Electrical/Mechanical or Equivalent Multi skilled technician Experience of fault finding on PLC/Scada systems. ( Modicon or Siemens preferred) Fault finding on control panels, network and bus systems Ability to read electrical drawing Good communication skills PC literate with ability to structure and write reports Proven experience of reactive and planned maintenance Checkable 5 year work history DBS The shift pattern is shift is 2 weeks of days, then 2 weeks of nights, 12 hour shifts. Week 1 - Weds and Thursday - Days Week 2 - Mon, Tues and Fri, Sat, Sun - Days Week 3 - Float week to cover sickness and holiday. 2-4 shifts depending on what sick/holiday is on that week. Nights Week 4 - Nights on same days as week 2. The salary is circa.£46,000 including shift allowance. Some overtime could be available. If you meet most of these criteria and you would like to find out more, don't hesitate to get in touch and apply today!
I am now working closely with an organisation who supplies packaging machinery to the corrugated industry. Role involves installing, commissioning and removing machinery at customer sites across the country and internationally. Requires frequent travel and staying away from home, occasionally including weekends. Preferred skills: Experience in the corrugated industry Control panel building, wiring & testing HMI and PLC programming Job benefits include: Competitive pay with overtime rates PPE and workwear provided Allowances for food and accommodation while travelling Company vehicle and credits cards Health insurance, gym membership and pension after qualifying period
17/05/2024
Full time
I am now working closely with an organisation who supplies packaging machinery to the corrugated industry. Role involves installing, commissioning and removing machinery at customer sites across the country and internationally. Requires frequent travel and staying away from home, occasionally including weekends. Preferred skills: Experience in the corrugated industry Control panel building, wiring & testing HMI and PLC programming Job benefits include: Competitive pay with overtime rates PPE and workwear provided Allowances for food and accommodation while travelling Company vehicle and credits cards Health insurance, gym membership and pension after qualifying period
Your new company Founded in 1987, our client is the UK's leading facilities management and professional services company. Across the country, our 77,500 people look after a large, diverse, blue chip customer base, from banks and retailers, to hospitals, schools and critical government strategic assets. We take care of our customers' people and buildings, by delivering the basics brilliantly and deploying advanced technology. Your new role Ensure compliance with statutory health and safety regulations.Provide technical advice related to HTM (Healthcare Technical Memoranda). Oversee Safe Systems of Work implementation and administration. Offer Technical advice to engineers and other staff Root cause analysis of problems Auditing/Inspection What you'll need to succeed Background in engineering - either electrical or mechanical biasFamiliarity with HTM guidelines is desirable IENG or working towards this LV, HV and AP experience are highly desirable Personality Skills: Strong communication, problem-solving, and leadership skills. Clean driving licence One of the below would be useful: HTM-01 - Decontamination HTM-02 - Medical Gasses HTM-03 - Ventilation HTM-04 - Water HTM-05 - Fire HTM-06 - Electrical HTM 07 - Environment HTM 08 - Specialist Services (Lifts) . Pressure Systems Water Gas Fire Mgr Boiler Operator Accred Scheme (BOAS) Fuels & Oils Excavations Confined Spaces Working at Height What you'll get in return Training and upskilling opportunities Internal promotion opportunities Pension scheme Holidays Cycle to work scheme Employee shares scheme Car allowance or vehicle provided What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. Hays Talent Solutions is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.
16/05/2024
Full time
Your new company Founded in 1987, our client is the UK's leading facilities management and professional services company. Across the country, our 77,500 people look after a large, diverse, blue chip customer base, from banks and retailers, to hospitals, schools and critical government strategic assets. We take care of our customers' people and buildings, by delivering the basics brilliantly and deploying advanced technology. Your new role Ensure compliance with statutory health and safety regulations.Provide technical advice related to HTM (Healthcare Technical Memoranda). Oversee Safe Systems of Work implementation and administration. Offer Technical advice to engineers and other staff Root cause analysis of problems Auditing/Inspection What you'll need to succeed Background in engineering - either electrical or mechanical biasFamiliarity with HTM guidelines is desirable IENG or working towards this LV, HV and AP experience are highly desirable Personality Skills: Strong communication, problem-solving, and leadership skills. Clean driving licence One of the below would be useful: HTM-01 - Decontamination HTM-02 - Medical Gasses HTM-03 - Ventilation HTM-04 - Water HTM-05 - Fire HTM-06 - Electrical HTM 07 - Environment HTM 08 - Specialist Services (Lifts) . Pressure Systems Water Gas Fire Mgr Boiler Operator Accred Scheme (BOAS) Fuels & Oils Excavations Confined Spaces Working at Height What you'll get in return Training and upskilling opportunities Internal promotion opportunities Pension scheme Holidays Cycle to work scheme Employee shares scheme Car allowance or vehicle provided What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. Hays Talent Solutions is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.
My client based in Canterbury are urgently looking for an Administrator to join the team on an initial 4 month contract. The suitable Administrator must have worked in an Engineering/Mechanical/Electrical/Electronics environment. The Administrator will ideally have experience with PLM Systems and software, implementing various error codes This role will also involve manually entering and transferring data into a new system from old records. Any knowledge of CAD tools is also beneficial. For more information and a confidential chat about the role please contact Mimi (see below) By applying to this advert you are giving CPS Group (UK) Ltd authority to hold and process your data for this specific role and any other roles we may deem suitable to you over time. We will not pass your data to any third party without your verbal or written permission to do so. All incoming and outgoing calls are recorded for training and compliance purposes. CPS Group (UK) Ltd is acting as an Employment Agency in relation to this vacancy. Our new privacy policy can be found on our website
16/05/2024
Project-based
My client based in Canterbury are urgently looking for an Administrator to join the team on an initial 4 month contract. The suitable Administrator must have worked in an Engineering/Mechanical/Electrical/Electronics environment. The Administrator will ideally have experience with PLM Systems and software, implementing various error codes This role will also involve manually entering and transferring data into a new system from old records. Any knowledge of CAD tools is also beneficial. For more information and a confidential chat about the role please contact Mimi (see below) By applying to this advert you are giving CPS Group (UK) Ltd authority to hold and process your data for this specific role and any other roles we may deem suitable to you over time. We will not pass your data to any third party without your verbal or written permission to do so. All incoming and outgoing calls are recorded for training and compliance purposes. CPS Group (UK) Ltd is acting as an Employment Agency in relation to this vacancy. Our new privacy policy can be found on our website
Location: Cambridge We're seeking an experienced Lead Mechatronic Engineer to spearhead the development of our autonomous harvesting robot. In this role, you'll design, build, and test prototypes, ensuring the system's robustness and manufacturability for market readiness. Responsibilities: Lead the design and development of the robotic platform for precision harvesting. Integrate sensors, electronics, software, and electromechanical devices into cost-effective designs. Collaborate with cross-functional teams on system integration and manufacturing processes. Conduct field trials and validation at grower sites. Manage projects, partnerships, and suppliers to meet timelines and budgets. Present technical reports and updates to senior leadership. Oversee CAD and PDM infrastructure, providing training and support. Qualifications/Experience: Degree in Mechatronic Engineering or equivalent. 5+ years of product development experience in robotics or manufacturing. Expertise in SolidWorks, Altium, and the full product development life cycle. Proficient in 3D CAD modelling, tolerance analysis, and design for manufacturability. Ability to lead projects, interpret customer needs, and translate requirements. Skilled in managing multiple projects, deadlines, and priorities. Experience with design for manufacturing principles and FEA (preferred). Familiarity with robot arm actuators, end-effectors/grippers, and soft robotics. Strong problem-solving, analytical, and organizational skills. Excellent team player with the ability to work autonomously. Proficient in MS Office tools Job Types: Full-time, Permanent
16/05/2024
Full time
Location: Cambridge We're seeking an experienced Lead Mechatronic Engineer to spearhead the development of our autonomous harvesting robot. In this role, you'll design, build, and test prototypes, ensuring the system's robustness and manufacturability for market readiness. Responsibilities: Lead the design and development of the robotic platform for precision harvesting. Integrate sensors, electronics, software, and electromechanical devices into cost-effective designs. Collaborate with cross-functional teams on system integration and manufacturing processes. Conduct field trials and validation at grower sites. Manage projects, partnerships, and suppliers to meet timelines and budgets. Present technical reports and updates to senior leadership. Oversee CAD and PDM infrastructure, providing training and support. Qualifications/Experience: Degree in Mechatronic Engineering or equivalent. 5+ years of product development experience in robotics or manufacturing. Expertise in SolidWorks, Altium, and the full product development life cycle. Proficient in 3D CAD modelling, tolerance analysis, and design for manufacturability. Ability to lead projects, interpret customer needs, and translate requirements. Skilled in managing multiple projects, deadlines, and priorities. Experience with design for manufacturing principles and FEA (preferred). Familiarity with robot arm actuators, end-effectors/grippers, and soft robotics. Strong problem-solving, analytical, and organizational skills. Excellent team player with the ability to work autonomously. Proficient in MS Office tools Job Types: Full-time, Permanent
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
16/05/2024
Full time
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start