Forescout Engineer Fully remote £550 - £600 per day Inside IR35 An experienced ForeScout engineer is required for a leading global business to work out a multiyear security programme. As part of the wider IT Security Project Team, you'll be tasked to deliver a security improvement plan across the estate. You'll working alongside 3rd parties and local IT teams to introduce network security controls, visibility, control and the identification and mapping of traffic flows. Day to Day responsibilities: Planning and implementation of network access controls across a number of offices and sites using Forescout technologies. Planning and performing the migration from Cisco ISE NAC to Forescout. Planning and performing the migration from Forescout post-connect to pre-connect. Working with the NOC to streamline BAU support processes. Assisting Security Engineers in designing configuration changes to be implemented on local wired and wireless networks for Forescout visibility. Participating in design discussions with global sites to agree configuration changes within IT networks in support of Forescout implementation. Participating in design discussions with global sites to agree placement of monitoring appliances within OT networks in support of Forescout implementation. Please apply with latest CV for immediate consideration. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
01/05/2024
Project-based
Forescout Engineer Fully remote £550 - £600 per day Inside IR35 An experienced ForeScout engineer is required for a leading global business to work out a multiyear security programme. As part of the wider IT Security Project Team, you'll be tasked to deliver a security improvement plan across the estate. You'll working alongside 3rd parties and local IT teams to introduce network security controls, visibility, control and the identification and mapping of traffic flows. Day to Day responsibilities: Planning and implementation of network access controls across a number of offices and sites using Forescout technologies. Planning and performing the migration from Cisco ISE NAC to Forescout. Planning and performing the migration from Forescout post-connect to pre-connect. Working with the NOC to streamline BAU support processes. Assisting Security Engineers in designing configuration changes to be implemented on local wired and wireless networks for Forescout visibility. Participating in design discussions with global sites to agree configuration changes within IT networks in support of Forescout implementation. Participating in design discussions with global sites to agree placement of monitoring appliances within OT networks in support of Forescout implementation. Please apply with latest CV for immediate consideration. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
An Hardware/Electronics Manager is now available for a global client based near to Edinburgh. The role of Hardware/Electronics Design Manager is now needed as part of rapid growth within the business within Engineering with 10 Engineers reporting in across Electronics and PCB Design. As the Electronics Manager you will be shaping the team and leading the projects with a background of Hardware Design/PCB Design. Your role will involve managing he teams, succession planning, hiring, Performance Management and coaching managing their customer expectations. The company operate on a Hybrid working policy with Excellent benefits alongside bonus! Your role will also include maintaining technical roadmaps ad setting out the project scope, schedule and budget risks for projects for the team. This is an excellent opportunity if you are a Lead Electronics Design Engineer or Electronics Manager looking to get into an organisation where you have growth opportunities for leadership or if you are a staff level Engineer who has experience in mentoring/training/leading to take the next step up! Core Skills/Experience for this role include;- Degree in Engineering field - Electronics/Hardware/Computer Science etc Experience of Electronics Design, PCB Design Mentoring/Guidance of Junior, Mid level engineers Leading and delivering a project or any PM experience Leasing interfacing with customers or stakeholders within the business Excellent interpersonal skills Ability to work in a cross functional team environment I appreciate that you may not have all of the skills listed but if you feel this may be suitable let's have a chat and go from there. Please send your CV to (see below). Alternatively if you know someone who would be ideal for this role help them out and point them in my direction as we do offer generous referral fees WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
01/05/2024
Full time
An Hardware/Electronics Manager is now available for a global client based near to Edinburgh. The role of Hardware/Electronics Design Manager is now needed as part of rapid growth within the business within Engineering with 10 Engineers reporting in across Electronics and PCB Design. As the Electronics Manager you will be shaping the team and leading the projects with a background of Hardware Design/PCB Design. Your role will involve managing he teams, succession planning, hiring, Performance Management and coaching managing their customer expectations. The company operate on a Hybrid working policy with Excellent benefits alongside bonus! Your role will also include maintaining technical roadmaps ad setting out the project scope, schedule and budget risks for projects for the team. This is an excellent opportunity if you are a Lead Electronics Design Engineer or Electronics Manager looking to get into an organisation where you have growth opportunities for leadership or if you are a staff level Engineer who has experience in mentoring/training/leading to take the next step up! Core Skills/Experience for this role include;- Degree in Engineering field - Electronics/Hardware/Computer Science etc Experience of Electronics Design, PCB Design Mentoring/Guidance of Junior, Mid level engineers Leading and delivering a project or any PM experience Leasing interfacing with customers or stakeholders within the business Excellent interpersonal skills Ability to work in a cross functional team environment I appreciate that you may not have all of the skills listed but if you feel this may be suitable let's have a chat and go from there. Please send your CV to (see below). Alternatively if you know someone who would be ideal for this role help them out and point them in my direction as we do offer generous referral fees WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
Director eFX Lead Developer - C++, Java, Python, FX, eFX Low-latency, Trading, Front Office, Linux, Unix, Multithreading, Agile, DevOps, Cloud, AWS I am working with one of the world's leading Investment Banks which is looking for an eFX Lead Developer (Director level) to join their Information Systems Department who provide a complete range of state-of-the-art technology services and infrastructure to the global entities across the bank. In this role, you will be working to develop and maintain an automated trading application. You'll work closely with the Traders and Sales to build a low latency, high-performance eFX electronic trading system including Real Time Pricing, Risk, Price Distribution, Algo execution, and various electronic trading workflows. Embracing a hands-on approach and showcasing creativity in problem-solving and product development. Engaging in the development and support of Front Office Systems. Participating in the evaluation and endorsement of new technologies to enhance the Front Office Development team's value. Extracting, comprehending, and analysing functional requirements directly from the Front Office FX desk. Ensuring delivery aligns with agreed-upon requirements through an agile process, following ISD standards for Documentation, System Testing, User Acceptance testing, and Change Control. Maintaining open communication with technical architects within ISD to leverage reusable software for efficient time-to-market. Providing production support for implemented solutions, and handling incidents, problems, and defects. Cross-training other ISD members for solution support may require shifts or on-call duties beyond regular working hours. Designing, implementing, and delivering complex globally distributed high availability Real Time trading system. Key Skills: OO Language - C++/Java/Python/Rust/C# FX Financial Markets Low-Latency Market Data Multi-Threading No-SQL/SQL Unit Testing/TDD/Automated Testing This is a Full time position, offering a highly competitive salary, a strong benefits package, and a performance-related bonus. You will be required to travel to the office 3 days per week. If you think your skills and experience are a good fit for this position, I'd love to speak with you. Director eFX Lead Developer - C++, Java, Python, FX, eFX Low-latency, Trading, Front Office, Linux, Unix, Multithreading, Agile, DevOps, Cloud, AWS
01/05/2024
Full time
Director eFX Lead Developer - C++, Java, Python, FX, eFX Low-latency, Trading, Front Office, Linux, Unix, Multithreading, Agile, DevOps, Cloud, AWS I am working with one of the world's leading Investment Banks which is looking for an eFX Lead Developer (Director level) to join their Information Systems Department who provide a complete range of state-of-the-art technology services and infrastructure to the global entities across the bank. In this role, you will be working to develop and maintain an automated trading application. You'll work closely with the Traders and Sales to build a low latency, high-performance eFX electronic trading system including Real Time Pricing, Risk, Price Distribution, Algo execution, and various electronic trading workflows. Embracing a hands-on approach and showcasing creativity in problem-solving and product development. Engaging in the development and support of Front Office Systems. Participating in the evaluation and endorsement of new technologies to enhance the Front Office Development team's value. Extracting, comprehending, and analysing functional requirements directly from the Front Office FX desk. Ensuring delivery aligns with agreed-upon requirements through an agile process, following ISD standards for Documentation, System Testing, User Acceptance testing, and Change Control. Maintaining open communication with technical architects within ISD to leverage reusable software for efficient time-to-market. Providing production support for implemented solutions, and handling incidents, problems, and defects. Cross-training other ISD members for solution support may require shifts or on-call duties beyond regular working hours. Designing, implementing, and delivering complex globally distributed high availability Real Time trading system. Key Skills: OO Language - C++/Java/Python/Rust/C# FX Financial Markets Low-Latency Market Data Multi-Threading No-SQL/SQL Unit Testing/TDD/Automated Testing This is a Full time position, offering a highly competitive salary, a strong benefits package, and a performance-related bonus. You will be required to travel to the office 3 days per week. If you think your skills and experience are a good fit for this position, I'd love to speak with you. Director eFX Lead Developer - C++, Java, Python, FX, eFX Low-latency, Trading, Front Office, Linux, Unix, Multithreading, Agile, DevOps, Cloud, AWS
Senior Connectivity Firmware/Test Engineer 1 year freelance contract + extensions after Leuven, Belgium (2 days remote per week) Within our Personal Health R&D group, we want to capture the strong market growth in ICs for hearing aids and implants, hearables, wearables, and personal health monitoring applications, health IoT. Owing to our success, our department of 40+ engineers is growing, and we have challenging opportunities for software engineers. Our System-on-Chip products employ the latest Bluetooth Smart (BLE) or NFC with our experience in ultra-low power design. We develop the full software stack from driver-level all to way to turnkey applications, enabling our customers to build their products with minimum effort. Description of services: Unconditionally technically responsible for a subsystem, application Estimate the effort for your work and contribute to reviewing the estimates of peers Execute feasibility studies to underpin the estimations Create a design for the software Organize or contribute to (mutual) reviews of designs with colleagues and Software Architect Plan your assignments and report on progress Contribute to specifying and developing automated regression test frameworks. Document functional and performance specifications, test design documentation and develop the test strategy and test specifications. Work with the development team to develop and guide the implementation of module, systems and end to end tests (functional + performance testing) to fit in the test framework. Develop test automations using Python, Jenkins. Experience: Master's degree in Software Engineering or Electronics or, have reached this level through another form of training or experience. 3-5 years Embedded software/firmware development experience, in either the mobile industry or in semiconductors. Proud software craftsman with solid BLE 5.X experience, preferably in both Link Layer and Host stack Natural team player and obsessive to learn and gain experience Spoken and written English Knowledge of design methods and software engineering processes, Microcontroller architectures and peripherals, Embedded programming in C. Strong Python programming skills Building Real Time systems on bare metal or using an RTOS, structured debugging, interpretation of PCB schematics. Practical experience using the Scrum framework Experience in technical coaching of junior team members Additional context of the role: Idea is to find a candidate with a strong BLE knowledge. The work to be done is to develop the upper level (application level) of the BLE communication protocol stack which are not yet existing. To do this, knowledge/understanding/experience of the lower levels is absolutely necessary ( Link Layer and Host stack). The testing part of the job will be relatively limited to the beginning of the assignment. At that time 50% of the time should be spend within the R&D team which is currently struggling with the validation testing. Helping on this aspect will serve as an introduction to the product for the candidate. Finally, we want a senior profile as one of the tasks will be to lead the team in the "go to market strategy". The product till now is developed for use cases of specific customers but idea is to make it a mass product. The senior engineer should help here to identify what may be missing in the product to reach a broader audience, for example by comparison with competitors. This part will require again to interact with the R&D team.
30/04/2024
Project-based
Senior Connectivity Firmware/Test Engineer 1 year freelance contract + extensions after Leuven, Belgium (2 days remote per week) Within our Personal Health R&D group, we want to capture the strong market growth in ICs for hearing aids and implants, hearables, wearables, and personal health monitoring applications, health IoT. Owing to our success, our department of 40+ engineers is growing, and we have challenging opportunities for software engineers. Our System-on-Chip products employ the latest Bluetooth Smart (BLE) or NFC with our experience in ultra-low power design. We develop the full software stack from driver-level all to way to turnkey applications, enabling our customers to build their products with minimum effort. Description of services: Unconditionally technically responsible for a subsystem, application Estimate the effort for your work and contribute to reviewing the estimates of peers Execute feasibility studies to underpin the estimations Create a design for the software Organize or contribute to (mutual) reviews of designs with colleagues and Software Architect Plan your assignments and report on progress Contribute to specifying and developing automated regression test frameworks. Document functional and performance specifications, test design documentation and develop the test strategy and test specifications. Work with the development team to develop and guide the implementation of module, systems and end to end tests (functional + performance testing) to fit in the test framework. Develop test automations using Python, Jenkins. Experience: Master's degree in Software Engineering or Electronics or, have reached this level through another form of training or experience. 3-5 years Embedded software/firmware development experience, in either the mobile industry or in semiconductors. Proud software craftsman with solid BLE 5.X experience, preferably in both Link Layer and Host stack Natural team player and obsessive to learn and gain experience Spoken and written English Knowledge of design methods and software engineering processes, Microcontroller architectures and peripherals, Embedded programming in C. Strong Python programming skills Building Real Time systems on bare metal or using an RTOS, structured debugging, interpretation of PCB schematics. Practical experience using the Scrum framework Experience in technical coaching of junior team members Additional context of the role: Idea is to find a candidate with a strong BLE knowledge. The work to be done is to develop the upper level (application level) of the BLE communication protocol stack which are not yet existing. To do this, knowledge/understanding/experience of the lower levels is absolutely necessary ( Link Layer and Host stack). The testing part of the job will be relatively limited to the beginning of the assignment. At that time 50% of the time should be spend within the R&D team which is currently struggling with the validation testing. Helping on this aspect will serve as an introduction to the product for the candidate. Finally, we want a senior profile as one of the tasks will be to lead the team in the "go to market strategy". The product till now is developed for use cases of specific customers but idea is to make it a mass product. The senior engineer should help here to identify what may be missing in the product to reach a broader audience, for example by comparison with competitors. This part will require again to interact with the R&D team.
Exciting Opportunity for Embedded Design Engineer Are you a talented Embedded Design Engineer looking for a challenging and rewarding permanent position? Our client, a leading technology company, is seeking a skilled professional to join their dynamic team and contribute to the design and development of world-beating products. In this role, you will play a crucial part in supporting the UK-based Embedded team through an extremely busy period, juggling both New Product Development and delivering customer-funded projects based around existing product ranges. While the primary focus will be on Datalink products, you may also be asked to support other product lines within the company. Key responsibilities include: Designing firmware/software for processors and microcontrollers using Embedded C Developing solutions using Linux Creating firmware for FPGAs using VHDL/DSP Supporting production and manufacturing teams Troubleshooting firmware, software, and system issues Testing and debugging new and existing designs Creating comprehensive documentation, including requirement specifications, test plans, user information, and API documents The ideal candidate will have a minimum of 3 years of experience in an equivalent role and possess a strong skill set in C/C++, Embedded Linux, and FPGA development. Experience with DVB-T, datalink/radio technologies, video, and broadcast is a plus. A degree in electronics, computer science, or a related subject is desirable. Our client offers a competitive salary, excellent benefits, and a supportive work environment that encourages professional growth and development. If you're a self-motivated, enthusiastic team player with strong interpersonal skills and a desire to make an impact, we'd love to hear from you. Apply now and take the first step towards an exciting new chapter in your career!
30/04/2024
Full time
Exciting Opportunity for Embedded Design Engineer Are you a talented Embedded Design Engineer looking for a challenging and rewarding permanent position? Our client, a leading technology company, is seeking a skilled professional to join their dynamic team and contribute to the design and development of world-beating products. In this role, you will play a crucial part in supporting the UK-based Embedded team through an extremely busy period, juggling both New Product Development and delivering customer-funded projects based around existing product ranges. While the primary focus will be on Datalink products, you may also be asked to support other product lines within the company. Key responsibilities include: Designing firmware/software for processors and microcontrollers using Embedded C Developing solutions using Linux Creating firmware for FPGAs using VHDL/DSP Supporting production and manufacturing teams Troubleshooting firmware, software, and system issues Testing and debugging new and existing designs Creating comprehensive documentation, including requirement specifications, test plans, user information, and API documents The ideal candidate will have a minimum of 3 years of experience in an equivalent role and possess a strong skill set in C/C++, Embedded Linux, and FPGA development. Experience with DVB-T, datalink/radio technologies, video, and broadcast is a plus. A degree in electronics, computer science, or a related subject is desirable. Our client offers a competitive salary, excellent benefits, and a supportive work environment that encourages professional growth and development. If you're a self-motivated, enthusiastic team player with strong interpersonal skills and a desire to make an impact, we'd love to hear from you. Apply now and take the first step towards an exciting new chapter in your career!
Exciting Opportunity for an Electronics Engineer (Embedded DSP) at a Leading Company! Are you a passionate Embedded DSP Engineer looking to take your career to the next level? Lynx Recruitment is looking for an Electronics Engineer (Embedded DSP) to join our client's dynamic team and be at the forefront of developing cutting-edge systems. We are seeking a talented individual with 3+ years of experience as an Electronics/DSP Engineer or in a similar role. The ideal candidate must be well-versed in OFDM technologies, Forward Error Correction methods, and have a strong background in signal processing theory, algorithms, and implementation techniques. Expertise in Embedded code for timing-critical applications and DSP implementation on small microcontrollers and FPGAs is essential. As an Electronics Engineer (Embedded DSP), you will have the unique opportunity to: Take their established Wireline telemetry system to the next generation Maintain and develop the design Participate in code review and perform other programming tasks Provide troubleshooting assistance and technical support to team members Requirements: Proficiency in programming languages such as C/C++ and VHDL Proficiency in modelling packages such as Matlab or Octave Strong ability to write structured code and clear documentation Excellent analytical, problem-solving, and communication skills If you thrive in a collaborative environment and have a passion for innovation, we want to hear from you! Join our client's team and be part of a group that is pushing the boundaries of Wireline telemetry technology. Please apply now with an up to date CV! Don't miss this exciting opportunity to join a leading company and make a real impact in the industry!
30/04/2024
Full time
Exciting Opportunity for an Electronics Engineer (Embedded DSP) at a Leading Company! Are you a passionate Embedded DSP Engineer looking to take your career to the next level? Lynx Recruitment is looking for an Electronics Engineer (Embedded DSP) to join our client's dynamic team and be at the forefront of developing cutting-edge systems. We are seeking a talented individual with 3+ years of experience as an Electronics/DSP Engineer or in a similar role. The ideal candidate must be well-versed in OFDM technologies, Forward Error Correction methods, and have a strong background in signal processing theory, algorithms, and implementation techniques. Expertise in Embedded code for timing-critical applications and DSP implementation on small microcontrollers and FPGAs is essential. As an Electronics Engineer (Embedded DSP), you will have the unique opportunity to: Take their established Wireline telemetry system to the next generation Maintain and develop the design Participate in code review and perform other programming tasks Provide troubleshooting assistance and technical support to team members Requirements: Proficiency in programming languages such as C/C++ and VHDL Proficiency in modelling packages such as Matlab or Octave Strong ability to write structured code and clear documentation Excellent analytical, problem-solving, and communication skills If you thrive in a collaborative environment and have a passion for innovation, we want to hear from you! Join our client's team and be part of a group that is pushing the boundaries of Wireline telemetry technology. Please apply now with an up to date CV! Don't miss this exciting opportunity to join a leading company and make a real impact in the industry!
Senior Analog Electronics Engineer - Unleash Your Creativity and Innovation Are you a passionate and skilled analog electronics engineer looking for an opportunity to make a real impact? Lynx is representing a leading technology company seeking a Senior Analog Electronics Engineer to join the team and drive the development of cutting-edge products. In this pivotal role, you will have the freedom to apply your expertise in analog electronics engineering to plan, lead, and execute design tasks with a high degree of independence. Our client encourages creativity and ingenuity in developing technical solutions to complex problems, and you will have the opportunity to work on a wide range of exciting projects. As a Senior Analog Electronics Engineer, you will: Be recognised as an expert in the field of analog electronics Independently formulate technically innovative ideas and approaches Advise and coach less senior engineers, reviewing work for technical accuracy and adequacy Plan and execute work packages, either individually or as a work package owner Collaborate with cross-functional teams and oversee work with development partners To excel in this role, you should possess: Strong expertise in analog design, including low noise amplifiers, op-amp selection, loop stability, discrete transistor circuits, power amplifiers, and filter design Experience with switch mode power supplies, focusing on low noise/EMI, high efficiency, and low power Proficiency in measurement and testing using oscilloscopes, spectrum analysers, vector network analysers, and thermal cameras Knowledge of EMC, radio, and safety regulations (eg, EN 300220, EN61000, EN55011, EN55022) Extensive experience in product development and schematic capture & circuit simulation Additional advantageous skills include: Processor interfacing (USB, I2C, SPI, RS232/485) Digital Signal Processing and mathematical modelling Understanding of ADC/DAC types, usage, and design Experience with battery-powered devices and chargers PCB layout skills and the ability to lead technical teams Qualifications: BSc, BEng, or HND (or equivalent) in analog electronics engineering or a related field MSc, CEng, MIET (or equivalent) is preferred To apply, please submit your CV highlighting your relevant experience and accomplishments. Our client offers competitive compensation, comprehensive benefits, and opportunities for growth and development. Don't miss this exciting opportunity to make your mark in the world of analog electronics engineering Apply now!
30/04/2024
Full time
Senior Analog Electronics Engineer - Unleash Your Creativity and Innovation Are you a passionate and skilled analog electronics engineer looking for an opportunity to make a real impact? Lynx is representing a leading technology company seeking a Senior Analog Electronics Engineer to join the team and drive the development of cutting-edge products. In this pivotal role, you will have the freedom to apply your expertise in analog electronics engineering to plan, lead, and execute design tasks with a high degree of independence. Our client encourages creativity and ingenuity in developing technical solutions to complex problems, and you will have the opportunity to work on a wide range of exciting projects. As a Senior Analog Electronics Engineer, you will: Be recognised as an expert in the field of analog electronics Independently formulate technically innovative ideas and approaches Advise and coach less senior engineers, reviewing work for technical accuracy and adequacy Plan and execute work packages, either individually or as a work package owner Collaborate with cross-functional teams and oversee work with development partners To excel in this role, you should possess: Strong expertise in analog design, including low noise amplifiers, op-amp selection, loop stability, discrete transistor circuits, power amplifiers, and filter design Experience with switch mode power supplies, focusing on low noise/EMI, high efficiency, and low power Proficiency in measurement and testing using oscilloscopes, spectrum analysers, vector network analysers, and thermal cameras Knowledge of EMC, radio, and safety regulations (eg, EN 300220, EN61000, EN55011, EN55022) Extensive experience in product development and schematic capture & circuit simulation Additional advantageous skills include: Processor interfacing (USB, I2C, SPI, RS232/485) Digital Signal Processing and mathematical modelling Understanding of ADC/DAC types, usage, and design Experience with battery-powered devices and chargers PCB layout skills and the ability to lead technical teams Qualifications: BSc, BEng, or HND (or equivalent) in analog electronics engineering or a related field MSc, CEng, MIET (or equivalent) is preferred To apply, please submit your CV highlighting your relevant experience and accomplishments. Our client offers competitive compensation, comprehensive benefits, and opportunities for growth and development. Don't miss this exciting opportunity to make your mark in the world of analog electronics engineering Apply now!
Summary: A world-leading test equipment company that helps utility companies install, protect, and maintain infrastructure networks is entering an exciting phase of hardware development. They are seeking a Senior Electronics Engineer to help shape the direction of the next generation of underground location products. This role sits within the New Product Development (NPD) team, responsible for executing the technology and product roadmaps. You will lead technical research to increase maturity and decrease risk in upcoming projects. As landscapes continuously evolve, you'll ensure roadmaps align and research feeds into robust products. Responsibilities Include: Leading and owning work packages from inception through completion Mentoring junior engineers and leading technical/cross-functional teams Providing technical interface to product management, developing concepts aligned to roadmaps Applying electronics engineering knowledge to plan, lead, and execute design tasks Developing technical solutions requiring ingenuity and creativity Requirements: Engineering degree in Electronic Engineering or similar Skilled all-round electronics designer Strong analog design, test, PSU, EMC/regulatory, simulation, manufacturing test experience Debugging of processor-based hardware Board documentation and software team liaison Extensive product development background Ability to lead and mentor technical teams Benefits Include: Competitive salary Home/office hybrid working opportunities 25 days annual leave plus option to buy 3 more Pension scheme with employer contributions Private medical cover options Cycle to work scheme Free parking Annual bonus This is an opportunity to shape cutting-edge underground utility location products for a world-leading company with an excellent work-life balance. If you have the required electronics engineering skills, apply today!
30/04/2024
Full time
Summary: A world-leading test equipment company that helps utility companies install, protect, and maintain infrastructure networks is entering an exciting phase of hardware development. They are seeking a Senior Electronics Engineer to help shape the direction of the next generation of underground location products. This role sits within the New Product Development (NPD) team, responsible for executing the technology and product roadmaps. You will lead technical research to increase maturity and decrease risk in upcoming projects. As landscapes continuously evolve, you'll ensure roadmaps align and research feeds into robust products. Responsibilities Include: Leading and owning work packages from inception through completion Mentoring junior engineers and leading technical/cross-functional teams Providing technical interface to product management, developing concepts aligned to roadmaps Applying electronics engineering knowledge to plan, lead, and execute design tasks Developing technical solutions requiring ingenuity and creativity Requirements: Engineering degree in Electronic Engineering or similar Skilled all-round electronics designer Strong analog design, test, PSU, EMC/regulatory, simulation, manufacturing test experience Debugging of processor-based hardware Board documentation and software team liaison Extensive product development background Ability to lead and mentor technical teams Benefits Include: Competitive salary Home/office hybrid working opportunities 25 days annual leave plus option to buy 3 more Pension scheme with employer contributions Private medical cover options Cycle to work scheme Free parking Annual bonus This is an opportunity to shape cutting-edge underground utility location products for a world-leading company with an excellent work-life balance. If you have the required electronics engineering skills, apply today!
A leading Defence client of ours is currently looking for a Principal Systems Engineer within their Defence team to work on a variety of safety/mission critical projects. The right candidate will be responsible for understanding the customers complex needs and developing, validating & managing Systems requirements at all levels. What you'll be doing: * Developing complex system architectures and sub-systems using a Model Based Systems Engineering approach * Integration, analysis and test of Real Time systems containing multiple technical disciplines such as electronic, mechanical, optical and software sub-systems. * Taking accountability for collaborative technical work package execution and associated outcomes * Providing guidance, coaching and nurturing talent in other engineers * Verifying that customer needs are satisfied * Steering new and improved systems development through implementation whilst making use of best practice systems life cycle processes alongside techniques such as Learn First and Agile Your skills and experiences: Essential: * Proven experience developing systems in relevant product markets and/or domains, such as control systems, Real Time displays or other safety related systems * Proven experience in requirements management, design analyses, modelling and simulation, using tools such as DOORS, Siemens Polarion, Enterprise Architect, MATLAB and/or Simulink and design methodologies such as SysML * A degree or equivalent qualification in a relevant Scientific/Engineering subject (eg Systems Engineering, Electronic Engineering, Physics or Mathematics) Desirable: * Experience in integration, test, and/or verification of Real Time and/or safety related systems * Understanding of safety assessment processes including how these processes influence the design * Customer and/or supplier liaison experience for technical aspects, verifying and obtaining agreement that customer needs are satisfied * An understanding of information assurance, cyber security and environmental impact aspects relating to Real Time Embedded engineering products Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
30/04/2024
Full time
A leading Defence client of ours is currently looking for a Principal Systems Engineer within their Defence team to work on a variety of safety/mission critical projects. The right candidate will be responsible for understanding the customers complex needs and developing, validating & managing Systems requirements at all levels. What you'll be doing: * Developing complex system architectures and sub-systems using a Model Based Systems Engineering approach * Integration, analysis and test of Real Time systems containing multiple technical disciplines such as electronic, mechanical, optical and software sub-systems. * Taking accountability for collaborative technical work package execution and associated outcomes * Providing guidance, coaching and nurturing talent in other engineers * Verifying that customer needs are satisfied * Steering new and improved systems development through implementation whilst making use of best practice systems life cycle processes alongside techniques such as Learn First and Agile Your skills and experiences: Essential: * Proven experience developing systems in relevant product markets and/or domains, such as control systems, Real Time displays or other safety related systems * Proven experience in requirements management, design analyses, modelling and simulation, using tools such as DOORS, Siemens Polarion, Enterprise Architect, MATLAB and/or Simulink and design methodologies such as SysML * A degree or equivalent qualification in a relevant Scientific/Engineering subject (eg Systems Engineering, Electronic Engineering, Physics or Mathematics) Desirable: * Experience in integration, test, and/or verification of Real Time and/or safety related systems * Understanding of safety assessment processes including how these processes influence the design * Customer and/or supplier liaison experience for technical aspects, verifying and obtaining agreement that customer needs are satisfied * An understanding of information assurance, cyber security and environmental impact aspects relating to Real Time Embedded engineering products Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
29/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
Clinical Solutions Specialist. Job Summary: Our client a market leading global digital healthcare supplier require a Clinical Solutions Specialist to play a crucial role in connecting clinical and IT teams within healthcare organisations (NHS). Working closely with Clinical and Professional Services teams, this role facilitates successful customer implementation projects post-sale by applying clinical expertise, organisational knowledge, and change management skills. The position involves collaborating with clinical teams to understand workflows, define functional requirements, oversee configuration activities, and coordinate user testing. Additionally, the role contributes to refining clinical implementation methodology and requires some domestic and occasional international travel. Duties and Responsibilities: - Facilitate communication between clinical and IT teams through on-site visits, phone calls, web conferences, and email. - Execute project tasks including consulting on solutions, clinical workflow design and testing, and providing guidance on best practices. - Develop concise Clinical Design Documentation outlining workflows and recommendations for each clinical area. - Contribute to creating and maintaining process-related best practices, training materials, and documentation. - Identify clinical risks and assist in developing risk mitigation strategies. - Collaborate with Clinical Informatics Analyst to enhance existing workflows using digital solutions. - Offer implementation and post-implementation support. - Willingness to travel and work on-site at various healthcare facilities. - Engage with IT and clinical leadership and staff. - Perform other duties as assigned. Qualifications: - Preferred: Nursing degree or equivalent extensive clinical operations experience (Nursing, Radiologist etc) - Previous or current clinical or operational experience required. - Expertise in clinical workflows in major acute care hospital settings. - Credibility in the clinical environment. - Ability to translate clinical terminology and processes into layman's terms for non-clinical colleagues. - Excellent communication skills and ability to network with clinical peers and team members. - Capable of leading or participating in cross-functional teams. - Familiarity with acute care hospital information technologies preferred. - Knowledge of healthcare policies and regulations, such as NHS guidelines and information governance, preferred. - Familiarity with product management and software development life cycle preferred but not required. - Strong writing skills to document clinical analysis and recommendations clearly. This is an excellent opportunity to move into a full time digital career using your extensive clinical background. This is a remote role with some onsite work for meetings with clients 10%-20% of the time with very occasional longer periods, candidates require excellent communication skills and the ability to interact and direct senior healthcare clients. People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
29/04/2024
Full time
Clinical Solutions Specialist. Job Summary: Our client a market leading global digital healthcare supplier require a Clinical Solutions Specialist to play a crucial role in connecting clinical and IT teams within healthcare organisations (NHS). Working closely with Clinical and Professional Services teams, this role facilitates successful customer implementation projects post-sale by applying clinical expertise, organisational knowledge, and change management skills. The position involves collaborating with clinical teams to understand workflows, define functional requirements, oversee configuration activities, and coordinate user testing. Additionally, the role contributes to refining clinical implementation methodology and requires some domestic and occasional international travel. Duties and Responsibilities: - Facilitate communication between clinical and IT teams through on-site visits, phone calls, web conferences, and email. - Execute project tasks including consulting on solutions, clinical workflow design and testing, and providing guidance on best practices. - Develop concise Clinical Design Documentation outlining workflows and recommendations for each clinical area. - Contribute to creating and maintaining process-related best practices, training materials, and documentation. - Identify clinical risks and assist in developing risk mitigation strategies. - Collaborate with Clinical Informatics Analyst to enhance existing workflows using digital solutions. - Offer implementation and post-implementation support. - Willingness to travel and work on-site at various healthcare facilities. - Engage with IT and clinical leadership and staff. - Perform other duties as assigned. Qualifications: - Preferred: Nursing degree or equivalent extensive clinical operations experience (Nursing, Radiologist etc) - Previous or current clinical or operational experience required. - Expertise in clinical workflows in major acute care hospital settings. - Credibility in the clinical environment. - Ability to translate clinical terminology and processes into layman's terms for non-clinical colleagues. - Excellent communication skills and ability to network with clinical peers and team members. - Capable of leading or participating in cross-functional teams. - Familiarity with acute care hospital information technologies preferred. - Knowledge of healthcare policies and regulations, such as NHS guidelines and information governance, preferred. - Familiarity with product management and software development life cycle preferred but not required. - Strong writing skills to document clinical analysis and recommendations clearly. This is an excellent opportunity to move into a full time digital career using your extensive clinical background. This is a remote role with some onsite work for meetings with clients 10%-20% of the time with very occasional longer periods, candidates require excellent communication skills and the ability to interact and direct senior healthcare clients. People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
Overview Our client is a leader in their field, headquartered in Cambridgeshire, with over 3000 + employees worldwide. They provide cutting-edge technologies and systems to companies globally. They are currently on the hunt for a Senior Electronics Design Engineer to join the team. The ideal individual will be creative and technically gifted, being able to create technical solutions for design requirements. Key Responsibilities for the Senior Electronics Design Engineer: Creation of technical concepts and solutions to solve and meet internal design requirements. Design of Electronics, Firmware and Software to support the development of new Technologies. Root cause analysis and resolution of complex multi-domain issues of prototype systems. Documentation of designs and test results for hand over to new product development. Key Skills for the Senior Electronics Design Engineer: Significant Electronic Design experience in analogue electronic design/digital electronic design. Design verification and functional test software development, experience in C++, Arduino, Raspberry Pi and simple GUI. Able to adequately express technical matters orally and in writing. Teamwork within multi-functional.
29/04/2024
Full time
Overview Our client is a leader in their field, headquartered in Cambridgeshire, with over 3000 + employees worldwide. They provide cutting-edge technologies and systems to companies globally. They are currently on the hunt for a Senior Electronics Design Engineer to join the team. The ideal individual will be creative and technically gifted, being able to create technical solutions for design requirements. Key Responsibilities for the Senior Electronics Design Engineer: Creation of technical concepts and solutions to solve and meet internal design requirements. Design of Electronics, Firmware and Software to support the development of new Technologies. Root cause analysis and resolution of complex multi-domain issues of prototype systems. Documentation of designs and test results for hand over to new product development. Key Skills for the Senior Electronics Design Engineer: Significant Electronic Design experience in analogue electronic design/digital electronic design. Design verification and functional test software development, experience in C++, Arduino, Raspberry Pi and simple GUI. Able to adequately express technical matters orally and in writing. Teamwork within multi-functional.
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
29/04/2024
Project-based
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
Job Title: Continuous Improvement Lead Industry: Medical Device Manufacturing Location: Plymouth Position Type: Permanent About The Company Join a pioneering team at a UK-based company specializing in advanced wound care and wound closure products. An organisation dedicated to developing and manufacturing world-leading solutions that enhance patient care. With a wealth of resources and specialized expertise, they offer a unique opportunity to be part of a team involved in every aspect of product design, development, and manufacture. Job Description Overview Responsible for all manufacturing processes, lean improvements, cost reduction, technical capability enhancement, process development, new production introduction delivering outputs in line with the business objectives on safety, quality, delivery, and cost. To execute site support activities and provide maintenance of all relevant operational equipment to ensure longevity and availability. Key Responsibilities Working closely alongside production operations to ensure the startup/shut down and continual running of all manufacturing processes. Establish & maintain standard processes within the validated process window plus optimisation of the technical performance for all manufacturing elements. Investigate and resolve issues related to the technical performance Optimize and deliver continuous improvement on existing manufacturing processes. Assist R&D with the introduction of new products and processes into manufacturing. Development of new standard processes and ensure optimal implementation into manufacturing supported with initial procedures, training and coaching of manufacturing. Collaborate with Group Engineering to execute or support assigned capital expenditure projects. Maintain all production equipment to the defined schedule and provide maintenance of the whole site requirements including, fire system testing/training, legionella checks, calibration, and contractor control. Qualifications Current experience in production environment support role (or 5 years min). Experience of developing and/or testing a process within a clean room manufacturing environment. Good understanding of Lean Principles (5S/VSM/Kaizen). Minimum of HNC level qualification in mechanical, electronic, industrial, or manufacturing engineering, or similar. Experience in process and product validation (sterile packaging according to ISO 11607 would be advantageous). Understanding of a quality management system (ISO13485/FDA) and medical device manufacturing advantageous. Very good MS Office skills, especially Excel. Strong organizational skills with the ability to communicate at all levels of the organization. Effective time management with the ability to set priorities. Good written and spoken English. Salary & Benefits Up to £45,000 per annum (Depending on Experience) Annual incentive bonus Life Cover Penson contribution up to 6% Dental Insurance Employee share scheme Other Information Exciting opportunity to lead a transformative project with significant organizational impact. Competitive salary package commensurate with experience. Opportunity to work with a dynamic and collaborative team focused on driving continuous improvement and excellence. How to Apply Apply now by submitting your CV below, alternatively you can send your CV. Please include "Continuous Improvement Lead" in the subject line
25/04/2024
Full time
Job Title: Continuous Improvement Lead Industry: Medical Device Manufacturing Location: Plymouth Position Type: Permanent About The Company Join a pioneering team at a UK-based company specializing in advanced wound care and wound closure products. An organisation dedicated to developing and manufacturing world-leading solutions that enhance patient care. With a wealth of resources and specialized expertise, they offer a unique opportunity to be part of a team involved in every aspect of product design, development, and manufacture. Job Description Overview Responsible for all manufacturing processes, lean improvements, cost reduction, technical capability enhancement, process development, new production introduction delivering outputs in line with the business objectives on safety, quality, delivery, and cost. To execute site support activities and provide maintenance of all relevant operational equipment to ensure longevity and availability. Key Responsibilities Working closely alongside production operations to ensure the startup/shut down and continual running of all manufacturing processes. Establish & maintain standard processes within the validated process window plus optimisation of the technical performance for all manufacturing elements. Investigate and resolve issues related to the technical performance Optimize and deliver continuous improvement on existing manufacturing processes. Assist R&D with the introduction of new products and processes into manufacturing. Development of new standard processes and ensure optimal implementation into manufacturing supported with initial procedures, training and coaching of manufacturing. Collaborate with Group Engineering to execute or support assigned capital expenditure projects. Maintain all production equipment to the defined schedule and provide maintenance of the whole site requirements including, fire system testing/training, legionella checks, calibration, and contractor control. Qualifications Current experience in production environment support role (or 5 years min). Experience of developing and/or testing a process within a clean room manufacturing environment. Good understanding of Lean Principles (5S/VSM/Kaizen). Minimum of HNC level qualification in mechanical, electronic, industrial, or manufacturing engineering, or similar. Experience in process and product validation (sterile packaging according to ISO 11607 would be advantageous). Understanding of a quality management system (ISO13485/FDA) and medical device manufacturing advantageous. Very good MS Office skills, especially Excel. Strong organizational skills with the ability to communicate at all levels of the organization. Effective time management with the ability to set priorities. Good written and spoken English. Salary & Benefits Up to £45,000 per annum (Depending on Experience) Annual incentive bonus Life Cover Penson contribution up to 6% Dental Insurance Employee share scheme Other Information Exciting opportunity to lead a transformative project with significant organizational impact. Competitive salary package commensurate with experience. Opportunity to work with a dynamic and collaborative team focused on driving continuous improvement and excellence. How to Apply Apply now by submitting your CV below, alternatively you can send your CV. Please include "Continuous Improvement Lead" in the subject line
Job title: Presales Solution Engineer _ Mandarin speaking Location: Reading Overview: If you are enthusiastic about the renewable energy generation, this may be the opportunity you've been looking for. As a presales solution manager, you will be responsible for technical pre-sales of our industry leading solar PV inverter and ESS solution in the UK market. You will be an integral part of a rapidly growing team within a leading international organisation to establish, develop and close business opportunities. What you will do: Conduct technical sales routine works, including produce solution design and quotation, processing purchase order, supporting product demonstration and proof-of-concept test, etc. Take bidding responsibility as a technical lead to answer RFx, producing technical proposal, generating product solution quotation, presenting technical and commercial proposals, preparing technical related contractual clauses. Lead Go-To-Market activities to launch new product and solution into UK market, promote solar PV inverter and ESS solution to key distributors and installers by regularly delivering technical workshops and presentation. Identify client's key technical requirements and be able to drive and coordinate with internal product management, R&D, engineering team and marketing teams to ensure that these requirements are implemented in the product roadmap. Collect and analyse market and industry trend information and produce insight of latest regulation and technology development. Support account team to enhance customer relationships, to seek out, identify, develop and close business opportunities within designated customers. The ideal candidate: Good knowledge of solar PV inverters and Energy Storage System functionality, BOS and system with also strong commercial sales knowledge. 2+ years of solar power generation industry experience, hands-on experience on solar PV inverter and ESS design and installation is desirable. Product management skills: producing product & market promotion document, performing competition analysis, creating presentations of product features and benefits University degree on power electronics, electric & electronic engineering or similar subject is preferred. Communication & Learning skills: Team working spirit, self-motivated, great time-management skill, acting as a communication hub on product & solution-related matters. Combination of presenting, influencing, negotiating and relationship building skills to achieve product & solution sales success. Learning and adapting capability: learning quickly and forwardly, curiosities about new things. Others: Willingness to travel domestic on a regular basis, up to 50% travel. Occasionally international travel is required. Fluent command of written and spoken English. Chinese/Mandarin speaking is required. Project People is acting as an Employment Business in relation to this vacancy.
25/04/2024
Project-based
Job title: Presales Solution Engineer _ Mandarin speaking Location: Reading Overview: If you are enthusiastic about the renewable energy generation, this may be the opportunity you've been looking for. As a presales solution manager, you will be responsible for technical pre-sales of our industry leading solar PV inverter and ESS solution in the UK market. You will be an integral part of a rapidly growing team within a leading international organisation to establish, develop and close business opportunities. What you will do: Conduct technical sales routine works, including produce solution design and quotation, processing purchase order, supporting product demonstration and proof-of-concept test, etc. Take bidding responsibility as a technical lead to answer RFx, producing technical proposal, generating product solution quotation, presenting technical and commercial proposals, preparing technical related contractual clauses. Lead Go-To-Market activities to launch new product and solution into UK market, promote solar PV inverter and ESS solution to key distributors and installers by regularly delivering technical workshops and presentation. Identify client's key technical requirements and be able to drive and coordinate with internal product management, R&D, engineering team and marketing teams to ensure that these requirements are implemented in the product roadmap. Collect and analyse market and industry trend information and produce insight of latest regulation and technology development. Support account team to enhance customer relationships, to seek out, identify, develop and close business opportunities within designated customers. The ideal candidate: Good knowledge of solar PV inverters and Energy Storage System functionality, BOS and system with also strong commercial sales knowledge. 2+ years of solar power generation industry experience, hands-on experience on solar PV inverter and ESS design and installation is desirable. Product management skills: producing product & market promotion document, performing competition analysis, creating presentations of product features and benefits University degree on power electronics, electric & electronic engineering or similar subject is preferred. Communication & Learning skills: Team working spirit, self-motivated, great time-management skill, acting as a communication hub on product & solution-related matters. Combination of presenting, influencing, negotiating and relationship building skills to achieve product & solution sales success. Learning and adapting capability: learning quickly and forwardly, curiosities about new things. Others: Willingness to travel domestic on a regular basis, up to 50% travel. Occasionally international travel is required. Fluent command of written and spoken English. Chinese/Mandarin speaking is required. Project People is acting as an Employment Business in relation to this vacancy.
Software Engineer C++ Stevenage SC required before starting 12 Months could be extended Full Time Onsite PAY RATE - Up to £48.72 Per Hour PAYE Up To £65 Per Hour Pay To Umbrella Company INTERVIEW PROCESS 1 stage virtual interview CRITICAL ELEMENTS Strong knowledge of C and C++, Previous experience of developing Software in the area of test solutions, Good team working and communication skills The Opportunity Are you a forward thinking and talented software engineer who is passionate about creating high quality software and looking to take your career to the next level? This is a fantastic opportunity to be part of a team that is starting an exciting phase of transforming the way we develop and deliver software, putting our engineers at the heart of this transformation whilst developing software that facilitates testing across the whole of the companies UK product portfolio. We invite you to apply to join a team with a great balance of new ideas and in depth experience which promotes a highly dynamic working environment. The role will be for an initial 12 month period. In this role you will be: Designing and developing Test Equipment software to test world leading complex missile systems and sub-components; Working with a wide range of teams and stakeholders to deliver test software capability of products from early concept to production; Exploring and experimenting with new implementations and technologies to meet the ever challenging customer requirements Challenging and implementing real change when opportunities arise in the way the software is developed both within test software and the wider software community Embracing Agility and delivering value to the company giving you are real sense of achievement Working in a Software Engineering office/lab environment engaging with test equipment and electronic circuitry. What's in it for you? Chance to join a friendly, motivated team and play a part in its evolution. Working in a department supporting the whole product portfolio throughout the entire engineering life cycle will give you the platform to significantly increase your engineering skills and knowledge. To input and shape how Software is developed by introducing new development techniques and tools Working closely with our colleagues across the UK and in France and Italy, so there may be the opportunity to travel both within the UK and to our sites in France and Italy. Great personal development opportunities through various learning and development initiatives to keep you skills at the forefront of software engineering A supportive working environment enabling you to develop and grow your career in a company with expanding horizons. Working at the sharp end of product development and production, enabling the development and delivery of our world leading products to customers. What's great about the team The UK Test Software team is a multi-disciplined, dynamic, focused and agile team of about 50 engineers specialising in all aspects of Test Solution design, including hardware, software and Embedded Real Time systems. It is a great place to learn about the company's entire product range. What are we looking for We are keen to expand our team with the right people that complement and enrich our culture while empowering our exciting transformation initiative. We are keen to learn from new people and passionate about building high performing teams. We therefore invite self-motivated, passionate, adaptable and proficient software engineers to apply for this role. Previous software engineering experience in the development of test solutions Strong ability to write software in C/C++; experience with C# and Scripting languages would be an advantage to our future strategy. Proactive and able to take ownership of the software development. Great communication skills with a strong motivation for collaboration. Previous experience working in an agile development team. A strong understanding of what is required to create high quality software and the ability to support quality practices Knowledge and experience of NI Test Stand is desirable Knowledge of electronics measurement and debug techniques using equipment such as oscilloscopes and spectrum analysers Understanding of communications and serial interfaces such as RS422, RS485, Modbus, CAN and 1553 Can articulate the benefits of key software craftsmanship practices like unit testing and good design Someone who is comfortable with change and understands the importance of continuous improvement within a modern software development team. Experience of Test Driven Development within a software engineering context and comfortable with practices like pair programming and lightweight design modelling A good understanding of automation, continuous integration and DevOps principles and practices desirable.
25/04/2024
Project-based
Software Engineer C++ Stevenage SC required before starting 12 Months could be extended Full Time Onsite PAY RATE - Up to £48.72 Per Hour PAYE Up To £65 Per Hour Pay To Umbrella Company INTERVIEW PROCESS 1 stage virtual interview CRITICAL ELEMENTS Strong knowledge of C and C++, Previous experience of developing Software in the area of test solutions, Good team working and communication skills The Opportunity Are you a forward thinking and talented software engineer who is passionate about creating high quality software and looking to take your career to the next level? This is a fantastic opportunity to be part of a team that is starting an exciting phase of transforming the way we develop and deliver software, putting our engineers at the heart of this transformation whilst developing software that facilitates testing across the whole of the companies UK product portfolio. We invite you to apply to join a team with a great balance of new ideas and in depth experience which promotes a highly dynamic working environment. The role will be for an initial 12 month period. In this role you will be: Designing and developing Test Equipment software to test world leading complex missile systems and sub-components; Working with a wide range of teams and stakeholders to deliver test software capability of products from early concept to production; Exploring and experimenting with new implementations and technologies to meet the ever challenging customer requirements Challenging and implementing real change when opportunities arise in the way the software is developed both within test software and the wider software community Embracing Agility and delivering value to the company giving you are real sense of achievement Working in a Software Engineering office/lab environment engaging with test equipment and electronic circuitry. What's in it for you? Chance to join a friendly, motivated team and play a part in its evolution. Working in a department supporting the whole product portfolio throughout the entire engineering life cycle will give you the platform to significantly increase your engineering skills and knowledge. To input and shape how Software is developed by introducing new development techniques and tools Working closely with our colleagues across the UK and in France and Italy, so there may be the opportunity to travel both within the UK and to our sites in France and Italy. Great personal development opportunities through various learning and development initiatives to keep you skills at the forefront of software engineering A supportive working environment enabling you to develop and grow your career in a company with expanding horizons. Working at the sharp end of product development and production, enabling the development and delivery of our world leading products to customers. What's great about the team The UK Test Software team is a multi-disciplined, dynamic, focused and agile team of about 50 engineers specialising in all aspects of Test Solution design, including hardware, software and Embedded Real Time systems. It is a great place to learn about the company's entire product range. What are we looking for We are keen to expand our team with the right people that complement and enrich our culture while empowering our exciting transformation initiative. We are keen to learn from new people and passionate about building high performing teams. We therefore invite self-motivated, passionate, adaptable and proficient software engineers to apply for this role. Previous software engineering experience in the development of test solutions Strong ability to write software in C/C++; experience with C# and Scripting languages would be an advantage to our future strategy. Proactive and able to take ownership of the software development. Great communication skills with a strong motivation for collaboration. Previous experience working in an agile development team. A strong understanding of what is required to create high quality software and the ability to support quality practices Knowledge and experience of NI Test Stand is desirable Knowledge of electronics measurement and debug techniques using equipment such as oscilloscopes and spectrum analysers Understanding of communications and serial interfaces such as RS422, RS485, Modbus, CAN and 1553 Can articulate the benefits of key software craftsmanship practices like unit testing and good design Someone who is comfortable with change and understands the importance of continuous improvement within a modern software development team. Experience of Test Driven Development within a software engineering context and comfortable with practices like pair programming and lightweight design modelling A good understanding of automation, continuous integration and DevOps principles and practices desirable.