Configuration Engineer £43ph (Umbrella, Inside IR35) Lincoln (Regular home working available) Initial 6 months An experienced Configuration Engineer is required for our Lincoln site, preferably within the Defence and Aerospace Sector; you will be required to discharge the 5 key Configuration activities into IPT's across all life cycle phases of a Programme. Within this role, you shall give clear direction into the IPT on C&DM process and tools be that at System Requirements, System level, Software, or hardware. In doing so, you must be prepared to 'challenge the norm' and support the IPT's in process tailoring to fit the life cycle phase and/or context of a Programme As a Configuration Engineer, you are expected to: Drive a pro-active approach to C&DM into IPT's Support the Head of Configuration and Data Management in encouraging new ideas and innovative solutions into the IPT and the Line of Business. (LoB) As an individual, you are expected: To resolve C&DM issues within an IPT by making proposals and driving through solutions To build and manage Customer and Supplier relationships To develop and promote knowledge and use of PLM Key Responsibility Areas Configuration Management Planning including generation and review of CM Plan Configuration Identification Change Control - Must have had experience in operating Change Control Boards including Configuration status input to the Board Configuration Status Accounting with emphasis on the generation of Configuration Baselines Verification and Audit (led FCA/PCA) Working hand-in-hand with our engineering delivery teams to ensure the Project dataset is maintained and configuration controlled Skills, Qualifications & Knowledge Required A good understanding of Configuration Management in accordance with DEF STAN 05-57. Excellent practical understanding of the five key elements of Configuration Management: Planning, Identification, Change Management, Status Accounting and Audit/Verification Document management experience including delivery and receipt within the bounds of ITAR and Export controls Software Configuration Management at the point of release into the Product structure Provided C&DM input to Design Reviews and Certification (Configuration Baseline Management) Strong Administration Skills with an attention to detail - you are required to have a logical mind-set
17/05/2024
Project-based
Configuration Engineer £43ph (Umbrella, Inside IR35) Lincoln (Regular home working available) Initial 6 months An experienced Configuration Engineer is required for our Lincoln site, preferably within the Defence and Aerospace Sector; you will be required to discharge the 5 key Configuration activities into IPT's across all life cycle phases of a Programme. Within this role, you shall give clear direction into the IPT on C&DM process and tools be that at System Requirements, System level, Software, or hardware. In doing so, you must be prepared to 'challenge the norm' and support the IPT's in process tailoring to fit the life cycle phase and/or context of a Programme As a Configuration Engineer, you are expected to: Drive a pro-active approach to C&DM into IPT's Support the Head of Configuration and Data Management in encouraging new ideas and innovative solutions into the IPT and the Line of Business. (LoB) As an individual, you are expected: To resolve C&DM issues within an IPT by making proposals and driving through solutions To build and manage Customer and Supplier relationships To develop and promote knowledge and use of PLM Key Responsibility Areas Configuration Management Planning including generation and review of CM Plan Configuration Identification Change Control - Must have had experience in operating Change Control Boards including Configuration status input to the Board Configuration Status Accounting with emphasis on the generation of Configuration Baselines Verification and Audit (led FCA/PCA) Working hand-in-hand with our engineering delivery teams to ensure the Project dataset is maintained and configuration controlled Skills, Qualifications & Knowledge Required A good understanding of Configuration Management in accordance with DEF STAN 05-57. Excellent practical understanding of the five key elements of Configuration Management: Planning, Identification, Change Management, Status Accounting and Audit/Verification Document management experience including delivery and receipt within the bounds of ITAR and Export controls Software Configuration Management at the point of release into the Product structure Provided C&DM input to Design Reviews and Certification (Configuration Baseline Management) Strong Administration Skills with an attention to detail - you are required to have a logical mind-set
Position Available : Systems Engineer (Sensors & Navigation) Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £60,000 + Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices etc A basic understanding of project management is also needed for this role. Any experience with modelling tools such as MATLAB would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Monitoring technology advancements and areas for innovation Collaborating with suppliers and researchers for technology development Designing and conducting laboratory tests Supporting team trials Conducting research and design activities Investigating engineering problems Project management What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Appreciation of system design & integration challenges Basic understanding of project management processes Modelling skills, including proficiency with tools such as MATLAB, is a bonus to have Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
17/05/2024
Full time
Position Available : Systems Engineer (Sensors & Navigation) Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £60,000 + Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices etc A basic understanding of project management is also needed for this role. Any experience with modelling tools such as MATLAB would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Monitoring technology advancements and areas for innovation Collaborating with suppliers and researchers for technology development Designing and conducting laboratory tests Supporting team trials Conducting research and design activities Investigating engineering problems Project management What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Appreciation of system design & integration challenges Basic understanding of project management processes Modelling skills, including proficiency with tools such as MATLAB, is a bonus to have Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Supplier Relationship Manager Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £52,000 + Company Bonus & Very Good Pension Package Experience needed : Experience of managing relationships with suppliers and improving supplier performance within a complex, high-technology manufacturing environment such as defence, aerospace, automotive, robotics, space & satellite technology, nuclear and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently have several Supplier Performance Manager roles available in our team who ensure effective Supplier performance, capability & Risk management. You'll be part of a team focused on managing how suppliers deliver goods and their quality while also working with other procurement professionals, colleagues from different departments, and suppliers. We offer additional training programs available to learn more about procurement and quality. What we need from you: Experience of managing a portfolio of suppliers daily, reporting on performance and resolving supply chain risks Evaluate supplier capabilities to meet current and future delivery requirements Proven track record in enhancing Supplier Performance (Delivery and Quality) through lean methodologies and relevant tools eg root cause analysis, 8D, 5 Whys Skilled in process flow creation, lead time analysis, capacity assessment, and sub-tier mapping for a comprehensive supplier understanding Strong problem-solving abilities, employing techniques like DMAIC for root cause analysis and improvement implementation Proactive in identifying and mitigating potential Supply Chain Risks, devising improvement and mitigation strategies If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
17/05/2024
Full time
Position Available : Supplier Relationship Manager Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £52,000 + Company Bonus & Very Good Pension Package Experience needed : Experience of managing relationships with suppliers and improving supplier performance within a complex, high-technology manufacturing environment such as defence, aerospace, automotive, robotics, space & satellite technology, nuclear and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently have several Supplier Performance Manager roles available in our team who ensure effective Supplier performance, capability & Risk management. You'll be part of a team focused on managing how suppliers deliver goods and their quality while also working with other procurement professionals, colleagues from different departments, and suppliers. We offer additional training programs available to learn more about procurement and quality. What we need from you: Experience of managing a portfolio of suppliers daily, reporting on performance and resolving supply chain risks Evaluate supplier capabilities to meet current and future delivery requirements Proven track record in enhancing Supplier Performance (Delivery and Quality) through lean methodologies and relevant tools eg root cause analysis, 8D, 5 Whys Skilled in process flow creation, lead time analysis, capacity assessment, and sub-tier mapping for a comprehensive supplier understanding Strong problem-solving abilities, employing techniques like DMAIC for root cause analysis and improvement implementation Proactive in identifying and mitigating potential Supply Chain Risks, devising improvement and mitigation strategies If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Panels Structures Assembly Technician £23.82 per hour. Umbrella. Stevenage - 5 days onsite. Certain Advantage is hiring for a Panels Structures Assembly Technician based in Stevenage. This role is on a 6-month contract basis and is office based. Working within the operations team to consistently produce items which conform to all quality requirements in accordance with the production plan. Does this sound like your next career move? If you're ambitious to grow, this may be your next role. The role: Highlight any anomalies and second close non-conformances where applicable, and proactively liaise with the Team Leader/Engineering to update paper works to reflect build sequence and data capture requirements. To work in accordance with LDS (local document system) describing methods and procedures. Complying with standard processes, specific area requirements and health and safety requirements. Promote and follow Cleanroom regulations, local area health and safety requirements and 5S policy within local work areas Ability to read and work to shop floor documentation such as routings, drawing, work instructions and bills of material. Working to the required process standard as dictated by the relevant area skills Matrix. Responsible for the completion of all paperwork relating to the operations undertaken, including traceability stamps and recording any other additional information as required. Reporting and highlighting errors to ME where applicable. Taking progress and reporting to Lead Technician/Team Lead when required. The individual We are looking for people who can show: Previous experience such as Composite manufacturing, mechanical fitter, close tolerance sheet metal worker, time served mechanical technician. Ability to work from detailed drawings and electronic work instructions - within specific procedures. Experience in industries such as Space/Aerospace/Automotive/Motorsport etc. Ability to work in confined spaces above floor level (Working at height) Experience of working within a clean room environment and of being part of a team and leading activities. City and guilds qualification or Btech National Manual Dexterity Does this sound like your next career move? Apply today! (Reference: 73003) Working with Certain Advantage We go the extra mile to find the best people for the job. If you're hunting for a role where you can make an impact and grow your career, we'll work with you to find it. We work with businesses across the UK to find the best people in Finance, Marketing, IT and Engineering.
17/05/2024
Project-based
Panels Structures Assembly Technician £23.82 per hour. Umbrella. Stevenage - 5 days onsite. Certain Advantage is hiring for a Panels Structures Assembly Technician based in Stevenage. This role is on a 6-month contract basis and is office based. Working within the operations team to consistently produce items which conform to all quality requirements in accordance with the production plan. Does this sound like your next career move? If you're ambitious to grow, this may be your next role. The role: Highlight any anomalies and second close non-conformances where applicable, and proactively liaise with the Team Leader/Engineering to update paper works to reflect build sequence and data capture requirements. To work in accordance with LDS (local document system) describing methods and procedures. Complying with standard processes, specific area requirements and health and safety requirements. Promote and follow Cleanroom regulations, local area health and safety requirements and 5S policy within local work areas Ability to read and work to shop floor documentation such as routings, drawing, work instructions and bills of material. Working to the required process standard as dictated by the relevant area skills Matrix. Responsible for the completion of all paperwork relating to the operations undertaken, including traceability stamps and recording any other additional information as required. Reporting and highlighting errors to ME where applicable. Taking progress and reporting to Lead Technician/Team Lead when required. The individual We are looking for people who can show: Previous experience such as Composite manufacturing, mechanical fitter, close tolerance sheet metal worker, time served mechanical technician. Ability to work from detailed drawings and electronic work instructions - within specific procedures. Experience in industries such as Space/Aerospace/Automotive/Motorsport etc. Ability to work in confined spaces above floor level (Working at height) Experience of working within a clean room environment and of being part of a team and leading activities. City and guilds qualification or Btech National Manual Dexterity Does this sound like your next career move? Apply today! (Reference: 73003) Working with Certain Advantage We go the extra mile to find the best people for the job. If you're hunting for a role where you can make an impact and grow your career, we'll work with you to find it. We work with businesses across the UK to find the best people in Finance, Marketing, IT and Engineering.
Senior Analog Electronics Engineer - Unleash Your Creativity and Innovation Are you a passionate and skilled analog electronics engineer looking for an opportunity to make a real impact? Lynx is representing a leading technology company seeking a Senior Analog Electronics Engineer to join the team and drive the development of cutting-edge products. In this pivotal role, you will have the freedom to apply your expertise in analog electronics engineering to plan, lead, and execute design tasks with a high degree of independence. Our client encourages creativity and ingenuity in developing technical solutions to complex problems, and you will have the opportunity to work on a wide range of exciting projects. As a Senior Analog Electronics Engineer, you will: Be recognised as an expert in the field of analog electronics Independently formulate technically innovative ideas and approaches Advise and coach less senior engineers, reviewing work for technical accuracy and adequacy Plan and execute work packages, either individually or as a work package owner Collaborate with cross-functional teams and oversee work with development partners To excel in this role, you should possess: Strong expertise in analog design, including low noise amplifiers, op-amp selection, loop stability, discrete transistor circuits, power amplifiers, and filter design Experience with switch mode power supplies, focusing on low noise/EMI, high efficiency, and low power Proficiency in measurement and testing using oscilloscopes, spectrum analysers, vector network analysers, and thermal cameras Knowledge of EMC, radio, and safety regulations (eg, EN 300220, EN61000, EN55011, EN55022) Extensive experience in product development and schematic capture & circuit simulation Additional advantageous skills include: Processor interfacing (USB, I2C, SPI, RS232/485) Digital Signal Processing and mathematical modelling Understanding of ADC/DAC types, usage, and design Experience with battery-powered devices and chargers PCB layout skills and the ability to lead technical teams Qualifications: BSc, BEng, or HND (or equivalent) in analog electronics engineering or a related field MSc, CEng, MIET (or equivalent) is preferred To apply, please submit your CV highlighting your relevant experience and accomplishments. Our client offers competitive compensation, comprehensive benefits, and opportunities for growth and development. Don't miss this exciting opportunity to make your mark in the world of analog electronics engineering Apply now!
17/05/2024
Full time
Senior Analog Electronics Engineer - Unleash Your Creativity and Innovation Are you a passionate and skilled analog electronics engineer looking for an opportunity to make a real impact? Lynx is representing a leading technology company seeking a Senior Analog Electronics Engineer to join the team and drive the development of cutting-edge products. In this pivotal role, you will have the freedom to apply your expertise in analog electronics engineering to plan, lead, and execute design tasks with a high degree of independence. Our client encourages creativity and ingenuity in developing technical solutions to complex problems, and you will have the opportunity to work on a wide range of exciting projects. As a Senior Analog Electronics Engineer, you will: Be recognised as an expert in the field of analog electronics Independently formulate technically innovative ideas and approaches Advise and coach less senior engineers, reviewing work for technical accuracy and adequacy Plan and execute work packages, either individually or as a work package owner Collaborate with cross-functional teams and oversee work with development partners To excel in this role, you should possess: Strong expertise in analog design, including low noise amplifiers, op-amp selection, loop stability, discrete transistor circuits, power amplifiers, and filter design Experience with switch mode power supplies, focusing on low noise/EMI, high efficiency, and low power Proficiency in measurement and testing using oscilloscopes, spectrum analysers, vector network analysers, and thermal cameras Knowledge of EMC, radio, and safety regulations (eg, EN 300220, EN61000, EN55011, EN55022) Extensive experience in product development and schematic capture & circuit simulation Additional advantageous skills include: Processor interfacing (USB, I2C, SPI, RS232/485) Digital Signal Processing and mathematical modelling Understanding of ADC/DAC types, usage, and design Experience with battery-powered devices and chargers PCB layout skills and the ability to lead technical teams Qualifications: BSc, BEng, or HND (or equivalent) in analog electronics engineering or a related field MSc, CEng, MIET (or equivalent) is preferred To apply, please submit your CV highlighting your relevant experience and accomplishments. Our client offers competitive compensation, comprehensive benefits, and opportunities for growth and development. Don't miss this exciting opportunity to make your mark in the world of analog electronics engineering Apply now!
ARM (Advanced Resource Managers)
Berkeley, Gloucestershire
Sales Account Manager Location: Berkeley Gloucestershire We are pleased to be working with a leading distributor of high quality flexible and specialist cables, cable management, identification, termination, fastenings, fixings and tools for the electrical and construction industries. The Role The role is within an established organisation's Internal Sales team, seeking a dedicated individual eager to advance their sales career. The role demands proficiency in B2B sales, adept account management, and exemplary customer service to meet departmental objectives and monthly financial targets. Specialising in cable accessory sales primarily within the wholesale market, the successful candidate will receive comprehensive product and technical training to excel in key account management and consultative technical sales. Performance will be evaluated based on exceeding monthly sales targets, fostering growth in key accounts, and delivering exceptional customer support. This opportunity offers a supportive environment for learning and professional development within the industry, inviting enthusiastic candidates to join a cohesive and goal-oriented team. Main Duties * Identify opportunities with new and existing customers, target these prospects with a clear and detailed plan enabling you to build long term profitable sales, develop relationships and recommend solutions. * Build relationships with new and existing customers to establish yourself as their key account manager and grow these accounts where opportunities are identified. * Respond to incoming email and phone enquiries ensuring customers are quoted and orders are processed by the Sales Support Team. * Create a daily outbound call plan ensuring you have a clear pro-active approach. * Listen to customer requirements creating detailed proposal documents and present appropriately to 'make the sale'. * Challenge any objections to convert your quotes. * Actively look for ways to grow business by immersing yourself in the industry and working closely with the sales leadership team on new ideas and prospects. * Advise customers on forthcoming product developments and discuss special promotions * Maintain clear and up to date customer records on the company CRM. * Represent the company at trade exhibitions, events etc. as and when required. * Remain motivated at all times, manage your workload in a progressive and proactive way to achieve your KPIs. * Follow Company Quality Management and Health & Safety guidelines. * Other reasonable tasks as requested by the Senior Management team. Candidate Profile * Previous internal sales experience (Ideally, minimum experience 3+ years). * Strong B2B sales experience, ideally consultative and/or technical. * Account management and business development experience is essential. * Strong communicator both verbally and in written form at all levels. * Ability to develop and maintain effective, positive working relationships with internal/external professionals. * Enjoys working to sales targets and goals, always striving to overachieve. * Good all-round IT skills and previous experience using a CRM system. * Must be team player with 'can do, will do' positive attitude, determination, and confidence. * Resilience and negotiations skills essential. * Ability to prioritise work and adapt positively to changing priorities. * Able to work on own initiative. * Experience in selling electrical accessories or cables would be highly advantageous. * Experience selling into a wholesale/re-distribution market will be highly desirable. * Formal sales qualifications and training will support any application. This vacancy is being advertised by Advanced Resource Managers. ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
16/05/2024
Full time
Sales Account Manager Location: Berkeley Gloucestershire We are pleased to be working with a leading distributor of high quality flexible and specialist cables, cable management, identification, termination, fastenings, fixings and tools for the electrical and construction industries. The Role The role is within an established organisation's Internal Sales team, seeking a dedicated individual eager to advance their sales career. The role demands proficiency in B2B sales, adept account management, and exemplary customer service to meet departmental objectives and monthly financial targets. Specialising in cable accessory sales primarily within the wholesale market, the successful candidate will receive comprehensive product and technical training to excel in key account management and consultative technical sales. Performance will be evaluated based on exceeding monthly sales targets, fostering growth in key accounts, and delivering exceptional customer support. This opportunity offers a supportive environment for learning and professional development within the industry, inviting enthusiastic candidates to join a cohesive and goal-oriented team. Main Duties * Identify opportunities with new and existing customers, target these prospects with a clear and detailed plan enabling you to build long term profitable sales, develop relationships and recommend solutions. * Build relationships with new and existing customers to establish yourself as their key account manager and grow these accounts where opportunities are identified. * Respond to incoming email and phone enquiries ensuring customers are quoted and orders are processed by the Sales Support Team. * Create a daily outbound call plan ensuring you have a clear pro-active approach. * Listen to customer requirements creating detailed proposal documents and present appropriately to 'make the sale'. * Challenge any objections to convert your quotes. * Actively look for ways to grow business by immersing yourself in the industry and working closely with the sales leadership team on new ideas and prospects. * Advise customers on forthcoming product developments and discuss special promotions * Maintain clear and up to date customer records on the company CRM. * Represent the company at trade exhibitions, events etc. as and when required. * Remain motivated at all times, manage your workload in a progressive and proactive way to achieve your KPIs. * Follow Company Quality Management and Health & Safety guidelines. * Other reasonable tasks as requested by the Senior Management team. Candidate Profile * Previous internal sales experience (Ideally, minimum experience 3+ years). * Strong B2B sales experience, ideally consultative and/or technical. * Account management and business development experience is essential. * Strong communicator both verbally and in written form at all levels. * Ability to develop and maintain effective, positive working relationships with internal/external professionals. * Enjoys working to sales targets and goals, always striving to overachieve. * Good all-round IT skills and previous experience using a CRM system. * Must be team player with 'can do, will do' positive attitude, determination, and confidence. * Resilience and negotiations skills essential. * Ability to prioritise work and adapt positively to changing priorities. * Able to work on own initiative. * Experience in selling electrical accessories or cables would be highly advantageous. * Experience selling into a wholesale/re-distribution market will be highly desirable. * Formal sales qualifications and training will support any application. This vacancy is being advertised by Advanced Resource Managers. ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
A Scottish Tech Org that operate in the space sector, with an office in Edinburgh , are going through a period of growth and are looking for an additional Java Software Engineer to join their core product function - Hybrid working (once a week in office). They've been operating successfully now for over ten years and have almost doubled in size over the past few years, as a result of successful funding campaigns. The organisation operate in the space sector and their products are used for a whole host of different reasons; environmental, safety, defence etc. The project work is genuinely really interesting which has a really positive impact globally (happy to discuss some of their applications further). Their Engineering function is already pretty established , and they're looking to really grow this year. You'd be joining one of their core services which is a crucial component with their overall product. Given the nature of the work they do, they've suggested there is a pretty steep learning curve here, however they have a really supportive and collaborative environment with a dedicated team lead and several other Engineers to lean on. You'll find yourself working in small squads and at times your own dedicated project, so are looking for Engineers that would feel confident enough in time for this. Additionally, the organisation place a really strong importance on developing robust, well-documented and tested software - so are looking for someone that has worked in this kind of environment before. You'll ideally have a couple years of commercial experience with the following; * Java * Databases (Ideally relational Databases) * Working with a Linux environment Experience with the following is highly desirable; * Working within a best practices environment (with a defined development process) * An interest or experience working in the space/aviation sector The organisation are based in Edinburgh , where they support hybrid working. They have suggested it would be ideal if people can pop into the offices once a week for team meetings, and it's usually helpful if people can pop in on occasion when first joining to help with the learning curve, but they're flex on this. In return they're able to offer a salary from £30k to £45k for this role, with good benefits to match which include (36 days holiday, 6% pension, Long-term sickness cover, enhanced Maternity and Paternity leave + much more). The company definitely pride themselves in being an employee orientated company (which is highlighted with the strong tenure of many of their staff members), they're also committed to investing in your development where you're able to sign up for training courses and regularly attend relevant events and conferences. If you're keen to find out more, please apply or drop Doug Paget at Cathcart Technology a message to discuss further.
16/05/2024
Full time
A Scottish Tech Org that operate in the space sector, with an office in Edinburgh , are going through a period of growth and are looking for an additional Java Software Engineer to join their core product function - Hybrid working (once a week in office). They've been operating successfully now for over ten years and have almost doubled in size over the past few years, as a result of successful funding campaigns. The organisation operate in the space sector and their products are used for a whole host of different reasons; environmental, safety, defence etc. The project work is genuinely really interesting which has a really positive impact globally (happy to discuss some of their applications further). Their Engineering function is already pretty established , and they're looking to really grow this year. You'd be joining one of their core services which is a crucial component with their overall product. Given the nature of the work they do, they've suggested there is a pretty steep learning curve here, however they have a really supportive and collaborative environment with a dedicated team lead and several other Engineers to lean on. You'll find yourself working in small squads and at times your own dedicated project, so are looking for Engineers that would feel confident enough in time for this. Additionally, the organisation place a really strong importance on developing robust, well-documented and tested software - so are looking for someone that has worked in this kind of environment before. You'll ideally have a couple years of commercial experience with the following; * Java * Databases (Ideally relational Databases) * Working with a Linux environment Experience with the following is highly desirable; * Working within a best practices environment (with a defined development process) * An interest or experience working in the space/aviation sector The organisation are based in Edinburgh , where they support hybrid working. They have suggested it would be ideal if people can pop into the offices once a week for team meetings, and it's usually helpful if people can pop in on occasion when first joining to help with the learning curve, but they're flex on this. In return they're able to offer a salary from £30k to £45k for this role, with good benefits to match which include (36 days holiday, 6% pension, Long-term sickness cover, enhanced Maternity and Paternity leave + much more). The company definitely pride themselves in being an employee orientated company (which is highlighted with the strong tenure of many of their staff members), they're also committed to investing in your development where you're able to sign up for training courses and regularly attend relevant events and conferences. If you're keen to find out more, please apply or drop Doug Paget at Cathcart Technology a message to discuss further.
Position Available : Commercial Contracts Manager Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £60,000 + Bonus & Good Pension Package Experience needed : Experience of drafting & managing contracts, negotiating terms, ensuring compliance, and mitigating risks related to commercial agreements. In order to transition into this role, candidates will need to have some experience within a defence/aerospace environment or have had some experience working on or with Ministry of Defence or government contracts. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently hiring several commercial contract officers to join our team who are responsible for maximising business opportunities through strategic planning and playing a pivotal role in securing new contracts. In this role, your responsibilities will encompass driving the full contract process, which includes bidding, cost management, and contract negotiations. You will be tasked with drafting and negotiating bespoke contract terms, ensuring they comply with the MoD structure, and creating confidentiality, loan, license, and NDA agreements for approval. Additionally, you will play a crucial role in ensuring the successful delivery of contracts by reviewing deliverables and acceptance criteria. Building and nurturing collaborative relationships with customers will be essential, and you will act as the primary point of contact for contractual information and agreements. Effective communication with stakeholders at all organisational levels will be key to success in this position, and you will also be expected to represent the commercial team in progress/reviews and customer meetings. What we need from you: Experience of drafting, negotiating and agreeing contracts and agreements Experience in the defence/aerospace indsutries would be a massive advantage A confident communicator, both orally and in writing Comfortable building effective working relationships Strong attention to detail and analytical in approach Defence knowledge and familiarity with MoD contracting structure, including DEFCONs and QDCs, is an advantage If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
16/05/2024
Full time
Position Available : Commercial Contracts Manager Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £60,000 + Bonus & Good Pension Package Experience needed : Experience of drafting & managing contracts, negotiating terms, ensuring compliance, and mitigating risks related to commercial agreements. In order to transition into this role, candidates will need to have some experience within a defence/aerospace environment or have had some experience working on or with Ministry of Defence or government contracts. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently hiring several commercial contract officers to join our team who are responsible for maximising business opportunities through strategic planning and playing a pivotal role in securing new contracts. In this role, your responsibilities will encompass driving the full contract process, which includes bidding, cost management, and contract negotiations. You will be tasked with drafting and negotiating bespoke contract terms, ensuring they comply with the MoD structure, and creating confidentiality, loan, license, and NDA agreements for approval. Additionally, you will play a crucial role in ensuring the successful delivery of contracts by reviewing deliverables and acceptance criteria. Building and nurturing collaborative relationships with customers will be essential, and you will act as the primary point of contact for contractual information and agreements. Effective communication with stakeholders at all organisational levels will be key to success in this position, and you will also be expected to represent the commercial team in progress/reviews and customer meetings. What we need from you: Experience of drafting, negotiating and agreeing contracts and agreements Experience in the defence/aerospace indsutries would be a massive advantage A confident communicator, both orally and in writing Comfortable building effective working relationships Strong attention to detail and analytical in approach Defence knowledge and familiarity with MoD contracting structure, including DEFCONs and QDCs, is an advantage If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
CNC MILLER SETTER OPERATOR REPORTING TO: PRODUCTION MANAGER Due to my client's continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Miller Setter Operator to support Production. My client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, my client can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. At my client, we believe that good customer service is every bit as important as a strong product. DUTIES AND RESPONSIBILITIES INCLUDE: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Setting and operating milling machines to required tolerance Use of manual measuring equipment Tool setting on CNC Machines Programme proving of new products as and when required. Actively provide details of changes to correct/improve programs that go towards improving machining performance Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Use of Fanuc controls Tapping and Deburring where required Help and assist other members of the milling cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the [COMPANY] Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required THE IDEAL CANDIDATE MUST HAVE/SKILLS REQUIRED: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player EXPERIENCE IN THE FOLLOWING AREAS WILL BE REQUIRED: 3-5 Years relevant production experience Experience of Milling Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs DESIRABLE: Experience of a high-quality Manufacturing environment Have previously run Matsuura 3-4-5 axis milling machines or similar Minor Fanuc programme editing Excellent communication skills Good time management
16/05/2024
Full time
CNC MILLER SETTER OPERATOR REPORTING TO: PRODUCTION MANAGER Due to my client's continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Miller Setter Operator to support Production. My client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, my client can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. At my client, we believe that good customer service is every bit as important as a strong product. DUTIES AND RESPONSIBILITIES INCLUDE: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Setting and operating milling machines to required tolerance Use of manual measuring equipment Tool setting on CNC Machines Programme proving of new products as and when required. Actively provide details of changes to correct/improve programs that go towards improving machining performance Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Use of Fanuc controls Tapping and Deburring where required Help and assist other members of the milling cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the [COMPANY] Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required THE IDEAL CANDIDATE MUST HAVE/SKILLS REQUIRED: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player EXPERIENCE IN THE FOLLOWING AREAS WILL BE REQUIRED: 3-5 Years relevant production experience Experience of Milling Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs DESIRABLE: Experience of a high-quality Manufacturing environment Have previously run Matsuura 3-4-5 axis milling machines or similar Minor Fanuc programme editing Excellent communication skills Good time management
Job Title: CNC Grinder Setter Operator Department: Production Reporting to: Production Supervisor Due to their continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Grinder Setter Operator to support Production. Our client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, they can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. We believe that good customer service is every bit as important as a strong product. Duties and responsibilities include: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Use of manual measuring equipment Produce programmes on the machine as and when new products arrive Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Machines include: Jones & Shipman 1300X, Studer S40, Studer S145, Jones & Shipman Techmaster 634 surface grinder Actively provide details of changes to correct/improve production of parts towards improving machining performance Help and assist other members of the grinding cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required The ideal candidate must have/skills required: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player Experience in the following areas will be required: 3-5 Years relevant production experience Experience of Grinding Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs Desirable: Experience of a high-quality Manufacturing environment Writing & editing CNC Grinding programs. Excellent communication skills Good time management
16/05/2024
Full time
Job Title: CNC Grinder Setter Operator Department: Production Reporting to: Production Supervisor Due to their continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Grinder Setter Operator to support Production. Our client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, they can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. We believe that good customer service is every bit as important as a strong product. Duties and responsibilities include: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Use of manual measuring equipment Produce programmes on the machine as and when new products arrive Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Machines include: Jones & Shipman 1300X, Studer S40, Studer S145, Jones & Shipman Techmaster 634 surface grinder Actively provide details of changes to correct/improve production of parts towards improving machining performance Help and assist other members of the grinding cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required The ideal candidate must have/skills required: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player Experience in the following areas will be required: 3-5 Years relevant production experience Experience of Grinding Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs Desirable: Experience of a high-quality Manufacturing environment Writing & editing CNC Grinding programs. Excellent communication skills Good time management
The Armament supervisor is responsible to the Armament lead and should be an experienced and skilled technician undertaking a range of detailed maintenance activities on aircraft equipment and/or aircraft components. The post holder should have an excellent understanding of the construct of the approved Technical Information set and is competent to supervise personnel who are working on maintenance instructions and in accordance with the organisation's Regulatory Framework and should be able to demonstrate a distinct ability to analyse and diagnose faults to equipment & assemblies, follow diagnostic procedures and work effectively within a team providing guidance to less experienced team members in a diverse and dynamic operational environment. Responsible for maintaining airworthiness through appropriate task delegation and authorisation on an aircraft or aircraft component. Responsible for meeting agreed delivery targets at a tactical level. Demonstrates people management and leadership skills Demonstrates awareness of broader external dependencies and identifies areas for continuous improvement. In addition the Post Holder shall hold certain privileges delegated from the Maintenance Manager. RequirementsCore Activities: Undertake detailed maintenance, inspection and supervision activities of aircraft components. Assuring work carried out has been completed in accordance with the SOW/Work package using the relevant approved technical information. Resolving faults and maintenance issues, including an awareness of configuration management. Undertake and complete tasked maintenance & diagnostic activities on weapons systems/components which will include, as appropriate, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test. Will be responsible for the operational output of each Component MRO Workshop under their control in line with agreed customer requirements. Post holder will also have responsibilities for the cost and schedule adherence of the component maintenance activities. Supervise team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider programme. Responsible for meeting agreed delivery targets in the short to medium term through the supervision of others. Progress reporting against delivery targets to management. Undertake support tasks within the component maintenance facility which are required to maintain compliance with the MOE and AMC procedures (eg oversight checks, control of tooling/test equipment etc.) Undertake fault evaluation and raise ad hoc work cards and for found faults' during maintenance. Ability to scope and carry out independent and vital inspections. Maintain personal & teams task authorisation for working on components in accordance with AMC requirements. Required to provide support and guidance, including allocation of tasks to appropriately authorised maintenance technicians. Provide effective leadership and supervision to team members under your direct supervision. Key Activities: Performance indicators - Ensure the effective management of Part 145 activities by setting delivery targets, monitoring progress and developing performance improvement programmes. Prioritises activities within/across teams to maximise efficiency. Represents the Maintenance Manager at management reviews, where necessary. Responsible for the assessment of escalated issues for any impact on Continuing Airworthiness and generating effective resolution, or sponsoring escalation to management, as appropriate. Completion of activities - Ensure all Part 145 activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Ensure all Part 145 activities are performed by suitably qualified, experienced and authorised personnel. Ensure the integration of Part 145 activity within the business, including the engagement of key stakeholders at all stages of the process. Provide support and guidance to the team(s). Procedure/standards - Manage the Part 145 team(s) compliance with the Part 145 Exposition, its associated procedures and standards, and any other Company procedures and standards, as applicable. Identify, propose and implement change as required, whilst ensuring compliance. Safety Management System - Promote the application of Human Factors, Error Management, Risk Management and Safety Assurance within the Part 145 team(s), together with the proactive analysis, mitigation and management of Hazards. Management System Assurance - Ensure Part 145 team(s) activities are compliant with the AM&S Governance and Assurance framework. Ensure Process Confirmations and independent assurance audits are supported by Part 145 personnel and integrated within/across teams. Manage the response to audit findings in a timely and appropriate manner and provide information into the relevant reviews. Generate and implement effective improvements within/across teams to overcome any non-compliance and monitor effectiveness. Statutory/Regulatory & Legislative requirements - Able to demonstrate a good understanding and application of the relevant Continuing Airworthiness Regulatory framework, and ensure any Regulatory-driven changes are implemented within the Part 145 team(s) activities. Ensure compliance with all other requirements, eg ITAR, EaPW, ISO, etc. Contractual Requirements - Ensure compliance with all applicable contractual requirements, eg through support to contract reviews, and ensure any changes are implemented into the Part 145 activities, as appropriate. Requirements: Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship/qualifications. Academic qualification for this role is a minimum of City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Experienced and competent leader at this level. Typically 2+ years' experience including type, classed as fully competent with all required 'Authorities' in place. Demonstrating breadth of experience, currency & recency via a Log Book (electronic or paper) capturing skills, knowledge and authorities for working on Aircraft type or in bays. Practical experience and expertise in the application of aviation safety standards and safe operating practices. A comprehensive knowledge of the Acceptable Means of Compliance. Management training. Leadership- Foundation. Human Factors- Standard Course Specification. E&PW Awareness- Standard Course Specification. ITAR Awareness- Standard Course Specification. Benefits Competitive Basic Salary 25 Days Annual Leave Annual Bonus On site Parking Pension Scheme Life Assurance
16/05/2024
Full time
The Armament supervisor is responsible to the Armament lead and should be an experienced and skilled technician undertaking a range of detailed maintenance activities on aircraft equipment and/or aircraft components. The post holder should have an excellent understanding of the construct of the approved Technical Information set and is competent to supervise personnel who are working on maintenance instructions and in accordance with the organisation's Regulatory Framework and should be able to demonstrate a distinct ability to analyse and diagnose faults to equipment & assemblies, follow diagnostic procedures and work effectively within a team providing guidance to less experienced team members in a diverse and dynamic operational environment. Responsible for maintaining airworthiness through appropriate task delegation and authorisation on an aircraft or aircraft component. Responsible for meeting agreed delivery targets at a tactical level. Demonstrates people management and leadership skills Demonstrates awareness of broader external dependencies and identifies areas for continuous improvement. In addition the Post Holder shall hold certain privileges delegated from the Maintenance Manager. RequirementsCore Activities: Undertake detailed maintenance, inspection and supervision activities of aircraft components. Assuring work carried out has been completed in accordance with the SOW/Work package using the relevant approved technical information. Resolving faults and maintenance issues, including an awareness of configuration management. Undertake and complete tasked maintenance & diagnostic activities on weapons systems/components which will include, as appropriate, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test. Will be responsible for the operational output of each Component MRO Workshop under their control in line with agreed customer requirements. Post holder will also have responsibilities for the cost and schedule adherence of the component maintenance activities. Supervise team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider programme. Responsible for meeting agreed delivery targets in the short to medium term through the supervision of others. Progress reporting against delivery targets to management. Undertake support tasks within the component maintenance facility which are required to maintain compliance with the MOE and AMC procedures (eg oversight checks, control of tooling/test equipment etc.) Undertake fault evaluation and raise ad hoc work cards and for found faults' during maintenance. Ability to scope and carry out independent and vital inspections. Maintain personal & teams task authorisation for working on components in accordance with AMC requirements. Required to provide support and guidance, including allocation of tasks to appropriately authorised maintenance technicians. Provide effective leadership and supervision to team members under your direct supervision. Key Activities: Performance indicators - Ensure the effective management of Part 145 activities by setting delivery targets, monitoring progress and developing performance improvement programmes. Prioritises activities within/across teams to maximise efficiency. Represents the Maintenance Manager at management reviews, where necessary. Responsible for the assessment of escalated issues for any impact on Continuing Airworthiness and generating effective resolution, or sponsoring escalation to management, as appropriate. Completion of activities - Ensure all Part 145 activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Ensure all Part 145 activities are performed by suitably qualified, experienced and authorised personnel. Ensure the integration of Part 145 activity within the business, including the engagement of key stakeholders at all stages of the process. Provide support and guidance to the team(s). Procedure/standards - Manage the Part 145 team(s) compliance with the Part 145 Exposition, its associated procedures and standards, and any other Company procedures and standards, as applicable. Identify, propose and implement change as required, whilst ensuring compliance. Safety Management System - Promote the application of Human Factors, Error Management, Risk Management and Safety Assurance within the Part 145 team(s), together with the proactive analysis, mitigation and management of Hazards. Management System Assurance - Ensure Part 145 team(s) activities are compliant with the AM&S Governance and Assurance framework. Ensure Process Confirmations and independent assurance audits are supported by Part 145 personnel and integrated within/across teams. Manage the response to audit findings in a timely and appropriate manner and provide information into the relevant reviews. Generate and implement effective improvements within/across teams to overcome any non-compliance and monitor effectiveness. Statutory/Regulatory & Legislative requirements - Able to demonstrate a good understanding and application of the relevant Continuing Airworthiness Regulatory framework, and ensure any Regulatory-driven changes are implemented within the Part 145 team(s) activities. Ensure compliance with all other requirements, eg ITAR, EaPW, ISO, etc. Contractual Requirements - Ensure compliance with all applicable contractual requirements, eg through support to contract reviews, and ensure any changes are implemented into the Part 145 activities, as appropriate. Requirements: Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship/qualifications. Academic qualification for this role is a minimum of City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Experienced and competent leader at this level. Typically 2+ years' experience including type, classed as fully competent with all required 'Authorities' in place. Demonstrating breadth of experience, currency & recency via a Log Book (electronic or paper) capturing skills, knowledge and authorities for working on Aircraft type or in bays. Practical experience and expertise in the application of aviation safety standards and safe operating practices. A comprehensive knowledge of the Acceptable Means of Compliance. Management training. Leadership- Foundation. Human Factors- Standard Course Specification. E&PW Awareness- Standard Course Specification. ITAR Awareness- Standard Course Specification. Benefits Competitive Basic Salary 25 Days Annual Leave Annual Bonus On site Parking Pension Scheme Life Assurance
Engine Technician Mon-Fri, 8:00am-4:30pm Oxford Summary Our client is currently recruiting for an Engine Technician to join our skilled engineering team. This position is a dedicated piston aero engine overhaul technician who will be responsible for the overhaul and repair of piston aero engines cylinders. To be considered for this position, you will have extensive mechanical engineering experience in either Aviation or Automotive industries. The successful candidate will join a long established and respected forward-thinking company that has a proven pedigree in career development within the organisation. Responsibilities: Responsible for the overhaul and repair of piston aero engines cylinders including refurbishment, cleaning, honing, valve work, assembly, etc. Maintaining the highest standards of quality and safety, with commercial awareness Work directly from approved maintenance data and accurately complete paperwork Prioritised requisitioning of spares to meet turnaround deadlines Skills, Qualifications and Experience required: Strong mechanical engineering background in Aviation or Automotive Good working knowledge of internal combustion engines and components Previous experience in piston engine restoration/refurbishment Background in manual machining and fabrication processes Working knowledge of relevant regulations In addition to a Competitive Salary, we offer pension, insurance, healthcare, parking, training and more.
16/05/2024
Full time
Engine Technician Mon-Fri, 8:00am-4:30pm Oxford Summary Our client is currently recruiting for an Engine Technician to join our skilled engineering team. This position is a dedicated piston aero engine overhaul technician who will be responsible for the overhaul and repair of piston aero engines cylinders. To be considered for this position, you will have extensive mechanical engineering experience in either Aviation or Automotive industries. The successful candidate will join a long established and respected forward-thinking company that has a proven pedigree in career development within the organisation. Responsibilities: Responsible for the overhaul and repair of piston aero engines cylinders including refurbishment, cleaning, honing, valve work, assembly, etc. Maintaining the highest standards of quality and safety, with commercial awareness Work directly from approved maintenance data and accurately complete paperwork Prioritised requisitioning of spares to meet turnaround deadlines Skills, Qualifications and Experience required: Strong mechanical engineering background in Aviation or Automotive Good working knowledge of internal combustion engines and components Previous experience in piston engine restoration/refurbishment Background in manual machining and fabrication processes Working knowledge of relevant regulations In addition to a Competitive Salary, we offer pension, insurance, healthcare, parking, training and more.
We are IT Recruitment Specialists partnered with a prestigious Global Consultancy who required an Automotive Feature Owner E-Powertrain - Gaydon 5 days working onsite, the balance of time will be remote for one of their public sector Clients based in the UK. IR35: This role is inside of IR35 Initial duration: 4 months Role and tasks At Automotive we drive the automotive trends of safety automation, electrification, and connectivity to the next generation of solutions. With so many new features added almost every day, we need automotive experts, and we are rapidly growing a team of SME's. We are looking for a Senior Engineer with automotive experience to deliver complex vehicle features that are cross-functional. You may come from the following (but not limited to) backgrounds: Powertrain, ADAS, Infotainment, Automotive systems, or software. Responsibilities - Owns a feature or multiple features from conception to implementation to validation. - Communicate and maintain feature/function level status. - Defines the vehicle system features/functions and allocates the vehicle system elements to build up the functional architecture. - Works with ECU engineers, program managers, electrical architecture team, product strategy and other stakeholders to align strategy and execution. - Refines use cases (end-to-end functions) to identify vehicle system features/functions. - Specifies vehicle system features/functions and is responsible for the completeness towards stakeholder requirements and establishes traceability, verification criteria and responsibilities. - Specifies non-functional requirements, process and project execution requirements, requirements for vehicle test and validation, requirements for manufacturing. - Collaborate with ECU engineers to review software implementation ensuring compliance with requirements. Your Profile - Senior Engineer with at least eight to twelve years' experience in Automotive - Background in one of the following is preferable: E-Powertrain If you are interested in this position and would like to learn more, please send through your CV and we will get in touch with you as soon as possible. Please note, candidates are often Shortlisted within 48 hours.
16/05/2024
Project-based
We are IT Recruitment Specialists partnered with a prestigious Global Consultancy who required an Automotive Feature Owner E-Powertrain - Gaydon 5 days working onsite, the balance of time will be remote for one of their public sector Clients based in the UK. IR35: This role is inside of IR35 Initial duration: 4 months Role and tasks At Automotive we drive the automotive trends of safety automation, electrification, and connectivity to the next generation of solutions. With so many new features added almost every day, we need automotive experts, and we are rapidly growing a team of SME's. We are looking for a Senior Engineer with automotive experience to deliver complex vehicle features that are cross-functional. You may come from the following (but not limited to) backgrounds: Powertrain, ADAS, Infotainment, Automotive systems, or software. Responsibilities - Owns a feature or multiple features from conception to implementation to validation. - Communicate and maintain feature/function level status. - Defines the vehicle system features/functions and allocates the vehicle system elements to build up the functional architecture. - Works with ECU engineers, program managers, electrical architecture team, product strategy and other stakeholders to align strategy and execution. - Refines use cases (end-to-end functions) to identify vehicle system features/functions. - Specifies vehicle system features/functions and is responsible for the completeness towards stakeholder requirements and establishes traceability, verification criteria and responsibilities. - Specifies non-functional requirements, process and project execution requirements, requirements for vehicle test and validation, requirements for manufacturing. - Collaborate with ECU engineers to review software implementation ensuring compliance with requirements. Your Profile - Senior Engineer with at least eight to twelve years' experience in Automotive - Background in one of the following is preferable: E-Powertrain If you are interested in this position and would like to learn more, please send through your CV and we will get in touch with you as soon as possible. Please note, candidates are often Shortlisted within 48 hours.
CONTRACTOR MUST BE ELIGIBLE FOR BPSS Role Title: Automotive Feature Owner E-Powertrain Location: Gaydon 5 days per week preference - will consider partial hybrid Duration: Until 30/09/24 MUST BE PAYE THROUGH UMBRELLA Role Description: At client Automotive we drive the automotive trends of safety automation, electrification, and connectivity to the next generation of solutions. With so many new features added almost every day, we need automotive experts, and we are rapidly growing a team of SME's. We are looking for a Senior Engineer with automotive experience to deliver complex vehicle features that are cross-functional. You may come from the following (but not limited to) backgrounds: Powertrain, ADAS, Infotainment, Automotive systems, or software. Responsibilities - Owns a feature or multiple features from conception to implementation to validation. - Communicate and maintain feature/function level status. - Defines the vehicle system features/functions and allocates the vehicle system elements to build up the functional architecture. - Works with ECU engineers, program managers, electrical architecture team, product strategy and other stakeholders to align strategy and execution. - Refines use cases (end-to-end functions) to identify vehicle system features/functions. - Specifies vehicle system features/functions and is responsible for the completeness towards stakeholder requirements and establishes traceability, verification criteria and responsibilities. - Specifies non-functional requirements, process and project execution requirements, requirements for vehicle test and validation, requirements for manufacturing. - Collaborate with ECU engineers to review software implementation ensuring compliance with requirements. Your Profile - Senior Engineer with at least eight to twelve years' experience in Automotive - Background in one of the following is preferable: E-Powertrain
16/05/2024
Project-based
CONTRACTOR MUST BE ELIGIBLE FOR BPSS Role Title: Automotive Feature Owner E-Powertrain Location: Gaydon 5 days per week preference - will consider partial hybrid Duration: Until 30/09/24 MUST BE PAYE THROUGH UMBRELLA Role Description: At client Automotive we drive the automotive trends of safety automation, electrification, and connectivity to the next generation of solutions. With so many new features added almost every day, we need automotive experts, and we are rapidly growing a team of SME's. We are looking for a Senior Engineer with automotive experience to deliver complex vehicle features that are cross-functional. You may come from the following (but not limited to) backgrounds: Powertrain, ADAS, Infotainment, Automotive systems, or software. Responsibilities - Owns a feature or multiple features from conception to implementation to validation. - Communicate and maintain feature/function level status. - Defines the vehicle system features/functions and allocates the vehicle system elements to build up the functional architecture. - Works with ECU engineers, program managers, electrical architecture team, product strategy and other stakeholders to align strategy and execution. - Refines use cases (end-to-end functions) to identify vehicle system features/functions. - Specifies vehicle system features/functions and is responsible for the completeness towards stakeholder requirements and establishes traceability, verification criteria and responsibilities. - Specifies non-functional requirements, process and project execution requirements, requirements for vehicle test and validation, requirements for manufacturing. - Collaborate with ECU engineers to review software implementation ensuring compliance with requirements. Your Profile - Senior Engineer with at least eight to twelve years' experience in Automotive - Background in one of the following is preferable: E-Powertrain
Role Title: Automotive Feature Owner - ICE Location: Gaydon 5 days per week preference - will consider partial hybrid Contract Inside IR35 CONTRACTOR MUST BE ELIGIBLE FOR BPSS Role Description: At Capgemini Automotive we drive the automotive trends of safety automation, electrification, and connectivity to the next generation of solutions. With so many new features added almost every day, we need automotive experts, and we are rapidly growing a team of SME's. We are looking for a Senior Engineer with automotive experience to deliver complex vehicle features that are cross-functional. You may come from the following (but not limited to) backgrounds: Powertrain, ADAS, Infotainment, Automotive systems, or software. Responsibilities Owns a feature or multiple features from conception to implementation to validation. Communicate and maintain feature/function level status. Defines the vehicle system features/functions and allocates the vehicle system elements to build up the functional architecture. Works with ECU engineers, program managers, electrical architecture team, product strategy and other stakeholders to align strategy and execution. Refines use cases (end-to-end functions) to identify vehicle system features/functions. Specifies vehicle system features/functions and is responsible for the completeness towards stakeholder requirements and establishes traceability, verification criteria and responsibilities. Specifies non-functional requirements, process and project execution requirements, requirements for vehicle test and validation, requirements for manufacturing. Collaborate with ECU engineers to review software implementation ensuring compliance with requirements Your Profile Senior Engineer with at least eight to twelve years' experience in Automotive Background in one of the following is preferable: ICE
16/05/2024
Project-based
Role Title: Automotive Feature Owner - ICE Location: Gaydon 5 days per week preference - will consider partial hybrid Contract Inside IR35 CONTRACTOR MUST BE ELIGIBLE FOR BPSS Role Description: At Capgemini Automotive we drive the automotive trends of safety automation, electrification, and connectivity to the next generation of solutions. With so many new features added almost every day, we need automotive experts, and we are rapidly growing a team of SME's. We are looking for a Senior Engineer with automotive experience to deliver complex vehicle features that are cross-functional. You may come from the following (but not limited to) backgrounds: Powertrain, ADAS, Infotainment, Automotive systems, or software. Responsibilities Owns a feature or multiple features from conception to implementation to validation. Communicate and maintain feature/function level status. Defines the vehicle system features/functions and allocates the vehicle system elements to build up the functional architecture. Works with ECU engineers, program managers, electrical architecture team, product strategy and other stakeholders to align strategy and execution. Refines use cases (end-to-end functions) to identify vehicle system features/functions. Specifies vehicle system features/functions and is responsible for the completeness towards stakeholder requirements and establishes traceability, verification criteria and responsibilities. Specifies non-functional requirements, process and project execution requirements, requirements for vehicle test and validation, requirements for manufacturing. Collaborate with ECU engineers to review software implementation ensuring compliance with requirements Your Profile Senior Engineer with at least eight to twelve years' experience in Automotive Background in one of the following is preferable: ICE
Role Title: Senior Automotive Engineer Duration: 3-4 Months Location: Gaydon - on site only Rate: £365/d - Umbrella only Would you like to join a global leader in consulting, technology services and digital transformation? Our client is at the forefront of innovation to address the entire breadth of opportunities in the evolving world of cloud, digital and platforms. Role purpose At Capgemini Automotive we drive the automotive trends of safety automation, electrification, and connectivity to the next generation of solutions. With so many new features added almost every day, we need automotive experts, and we are rapidly growing a team of SME's. We are looking for a Senior Engineer with automotive experience to deliver complex vehicle features that are cross-functional. You may come from the following (but not limited to) backgrounds: Powertrain, ADAS, Infotainment, Automotive systems, or software . Responsibilities Owns a feature or multiple features from conception to implementation to validation. Communicate and maintain feature/function level status. Defines the vehicle system features/functions and allocates the vehicle system elements to build up the functional architecture. Works with ECU engineers, program managers, electrical architecture team, product strategy and other stakeholders to align strategy and execution. Refines use cases (end-to-end functions) to identify vehicle system features/functions. Specifies vehicle system features/functions and is responsible for the completeness towards stakeholder requirements and establishes traceability, verification criteria and responsibilities. Specifies non-functional requirements, process and project execution requirements, requirements for vehicle test and validation, requirements for manufacturing. Collaborate with ECU engineers to review software implementation ensuring compliance with requirements. Key Skills/requirements Senior Engineer with at least eight to twelve years' experience in the automotive industry Preferable background in ICE All profiles will be reviewed against the required skills and experience. Due to the high number of applications, we will only be able to respond to successful applicants in the first instance. We thank you for your interest and the time taken to apply!
16/05/2024
Project-based
Role Title: Senior Automotive Engineer Duration: 3-4 Months Location: Gaydon - on site only Rate: £365/d - Umbrella only Would you like to join a global leader in consulting, technology services and digital transformation? Our client is at the forefront of innovation to address the entire breadth of opportunities in the evolving world of cloud, digital and platforms. Role purpose At Capgemini Automotive we drive the automotive trends of safety automation, electrification, and connectivity to the next generation of solutions. With so many new features added almost every day, we need automotive experts, and we are rapidly growing a team of SME's. We are looking for a Senior Engineer with automotive experience to deliver complex vehicle features that are cross-functional. You may come from the following (but not limited to) backgrounds: Powertrain, ADAS, Infotainment, Automotive systems, or software . Responsibilities Owns a feature or multiple features from conception to implementation to validation. Communicate and maintain feature/function level status. Defines the vehicle system features/functions and allocates the vehicle system elements to build up the functional architecture. Works with ECU engineers, program managers, electrical architecture team, product strategy and other stakeholders to align strategy and execution. Refines use cases (end-to-end functions) to identify vehicle system features/functions. Specifies vehicle system features/functions and is responsible for the completeness towards stakeholder requirements and establishes traceability, verification criteria and responsibilities. Specifies non-functional requirements, process and project execution requirements, requirements for vehicle test and validation, requirements for manufacturing. Collaborate with ECU engineers to review software implementation ensuring compliance with requirements. Key Skills/requirements Senior Engineer with at least eight to twelve years' experience in the automotive industry Preferable background in ICE All profiles will be reviewed against the required skills and experience. Due to the high number of applications, we will only be able to respond to successful applicants in the first instance. We thank you for your interest and the time taken to apply!
There's never been a more exciting time to be part of the nuclear sector. New opportunities are being created all the time. At our Client, you'll be in the ideal place to capitalise on this momentum, face new challenges and develop a long, successful and meaningful career. Our Client is an organisation that's here to experiment and push the limits of what's possible. So, if you're keen to excel in your chosen field, this is the place to do it. The Safety Case Manager (SCM) is a facility-specific, nuclear baseline role to support the Safety Case Delivery Lead to ensure the company's continued compliance with all safety case-related Site Licence Conditions (principally LC14, 15, 23, 27). The SCM is responsible for the development, implementation, maintenance and review of the safety case as well as managing integration of emergent project pipeline demands. The role is required to ensure that the safety case is delivered in a clear and user-friendly way all stakeholders. The SCM is a lead role and must be able to perform duties with minimal management direction. RESPONSIBILITIES Main responsibilities: Lead implementation of governance arrangements to ensure appropriate legislative, regulatory, environmental, safety and quality requirements are complied with across their area of responsibility. Develop, implement and maintain a clear strategy for the ongoing management of the safety case in line with the relevant process arrangements. Act as the customer (on behalf of the SCO) regarding safety case requirements. They shall be the primary point of contact for facility safety case issues. Sponsor documentation through the safety committee (PMP, MSC). Ensure the safety case is clear, fit for purpose, pragmatic and user friendly. Provide high quality safety case advice to all stakeholders. Identify and drive improvement initiatives on safety case understanding and implementation in the workplace. Look for, use and share learning from internal and external sources and from events and good practice. Drive the training and development of safety case team members in line with the safety case workbook, career Pathway and business requirements. Maintain up to date detailed knowledge of relevant legislative, regulatory and company policy, standards and procedures. Maintain a working knowledge of applicable regulations, processes and industry good practice, through attendance at relevant forums within the wider safety case community and benchmarking with other organisations. They shall be responsible for managing implementation of these back in the workplace. EXPERIENCE ESSENTIAL Experienced in working in a regulated industry, detail orientated, and able to work to stringent deadlines. Compliance professional, educated to Degree level (or equivalent), with extensive demonstrable practical & relevant experience in a safety case management role. Must demonstrate an ability to analyse and interpret complex information from several, sometimes conflicting or novel sources, with a proven problem-solving ability in order to make decisions based upon this information. Highly motivated with the ability to communicate concepts to diverse audiences with varying skills. Experience of remaining calm under stressful circumstances. Evidence of self-motivation with demonstrable levels of drive, energy and resilience. Ability to communicate key information both verbal and written with a range of stakeholders. Ability to influence, communicate and work collaboratively with a range of stakeholders across a team and business area. Good analytical thinking skills, with experience of solving novel and possibly challenging technical issues. Good understanding of ALARP principles. Good planning skills. Computer literate with MS Office suite. Ability to obtain DV level security clearance (this includes but is not limited to identity, employment, financial, criminal record checks, interview plus 10 years of UK residency). DESIRABLE Fully conversant with SLP 2.17 suite. SCM workbook completed. A thorough awareness of nuclear and conventional safety and security requirements applicable to their area(s) of responsibility.
16/05/2024
Full time
There's never been a more exciting time to be part of the nuclear sector. New opportunities are being created all the time. At our Client, you'll be in the ideal place to capitalise on this momentum, face new challenges and develop a long, successful and meaningful career. Our Client is an organisation that's here to experiment and push the limits of what's possible. So, if you're keen to excel in your chosen field, this is the place to do it. The Safety Case Manager (SCM) is a facility-specific, nuclear baseline role to support the Safety Case Delivery Lead to ensure the company's continued compliance with all safety case-related Site Licence Conditions (principally LC14, 15, 23, 27). The SCM is responsible for the development, implementation, maintenance and review of the safety case as well as managing integration of emergent project pipeline demands. The role is required to ensure that the safety case is delivered in a clear and user-friendly way all stakeholders. The SCM is a lead role and must be able to perform duties with minimal management direction. RESPONSIBILITIES Main responsibilities: Lead implementation of governance arrangements to ensure appropriate legislative, regulatory, environmental, safety and quality requirements are complied with across their area of responsibility. Develop, implement and maintain a clear strategy for the ongoing management of the safety case in line with the relevant process arrangements. Act as the customer (on behalf of the SCO) regarding safety case requirements. They shall be the primary point of contact for facility safety case issues. Sponsor documentation through the safety committee (PMP, MSC). Ensure the safety case is clear, fit for purpose, pragmatic and user friendly. Provide high quality safety case advice to all stakeholders. Identify and drive improvement initiatives on safety case understanding and implementation in the workplace. Look for, use and share learning from internal and external sources and from events and good practice. Drive the training and development of safety case team members in line with the safety case workbook, career Pathway and business requirements. Maintain up to date detailed knowledge of relevant legislative, regulatory and company policy, standards and procedures. Maintain a working knowledge of applicable regulations, processes and industry good practice, through attendance at relevant forums within the wider safety case community and benchmarking with other organisations. They shall be responsible for managing implementation of these back in the workplace. EXPERIENCE ESSENTIAL Experienced in working in a regulated industry, detail orientated, and able to work to stringent deadlines. Compliance professional, educated to Degree level (or equivalent), with extensive demonstrable practical & relevant experience in a safety case management role. Must demonstrate an ability to analyse and interpret complex information from several, sometimes conflicting or novel sources, with a proven problem-solving ability in order to make decisions based upon this information. Highly motivated with the ability to communicate concepts to diverse audiences with varying skills. Experience of remaining calm under stressful circumstances. Evidence of self-motivation with demonstrable levels of drive, energy and resilience. Ability to communicate key information both verbal and written with a range of stakeholders. Ability to influence, communicate and work collaboratively with a range of stakeholders across a team and business area. Good analytical thinking skills, with experience of solving novel and possibly challenging technical issues. Good understanding of ALARP principles. Good planning skills. Computer literate with MS Office suite. Ability to obtain DV level security clearance (this includes but is not limited to identity, employment, financial, criminal record checks, interview plus 10 years of UK residency). DESIRABLE Fully conversant with SLP 2.17 suite. SCM workbook completed. A thorough awareness of nuclear and conventional safety and security requirements applicable to their area(s) of responsibility.
Global Technology Solutions Ltd
Manchester, Lancashire
Ideal location - Manchester Salary - £27000 - 29000 Hours: Monday to Friday, pick up kit by 08:30 as local PUDO working on client site up till 17:30, overtime available Benefits: Car + Parking cards and Fuel cards + Pension + on call payment Start date - ASAP We have an exciting opportunity for a senior field service engineer to join a blue chip organisation on a permanent basis in Manchester. Senior Field Service Engineer will be required to fault find and repair a variety of IT equipment including Servers, PCs, Laptop, printer and point of sales systems (EPOS) at various Customer locations across the UK. Ensuring company processes, procedures and contractual requirements are followed whilst maintaining high levels of customer service. You must be an experienced time served "Field Service Engineer", a confident communicator at all levels and work well as part of a team. The position will report into Team Leader/Resource Managers (Field) but will also have critical relationships with Call Control and Technical vetting teams with Field Services. The role will involve: * Capable of working independently and remotely, required to perform on site troubleshooting on a wide range of products in a software or hardware environment. * Proficient in the installation, configuration and support of Server/Desktop/EPOS environment and in addition, be able to connect and install client software for various networking platforms at various customer locations in the UK. * Ability to follow documented procedures and adhere to safety and ESD precautions at all times. * Be able to demonstrate strong problem solving techniques with the ability to adapt and learn on the job. * Develop, grow and maintain professional working relationships with all internal stakeholders. * Call Control, Tech Vetting teams. * Ensure process, procedural and contractual agreements are being followed correctly. * Endeavour to provide all customers with the best level of customer service and support. * Complete documentation including Field Service Call reports and Customer Checksheets and ensure these are returned within SLA timescales. * Work proactively with call allocators to ensure SLA's are met in the most economic way. * Have a solid understanding of customers SLA requirement and use initiative to ensure the expectation is met and exceeded * Any additional activity as directed by Senior Management Key Experience * Have an excellent working knowledge of Server/PC architecture, knowledge of Windows Operating systems, break fix and troubleshooting of Servers, Desktops, EPOS, Laptops, and Printers. * Manufacturer recognised accreditations, ie HP/IBM/Dell. Both Server and Desktop. * At least 6 years customer facing IT industry experience. * Capable of working independently on a wide range of products. * Excellent communication skills. * Excellent proven organisational and customer service skills. * Able to work under pressure. * Able to maintain a consistent high standard of quality and professionalism. * Excellent Time management skills. * Team Player - ability to work as part of the team to deliver operational excellence. * Awareness of ITIL methodologies and best practice. * Previous employment in a similar role. * Ability to show flexibility to help the changing needs of the team. * Adhere to company standards and procedures at all times unless otherwise directed. * Maintain excellent customer relationships. * Maintain high levels of Punctuality, Communication, Attitude, Competence and Quality of Service * Maintain all appropriate Manufacturer Server Accreditations where app Senior Engineer main skills * MUST be able to obtain security clearances, BPSS & SC, (NPPV3 great to have but not essential) * X86 Server Hardware break fix Skills (can replace all components, upgrade Bios/firmware) * Laptop Hardware break fix skills (replace all components) * Must be able to hold Main vendor certifications on Servers & Laptops (Dell, HP, Lenovo) * Will form part of an on call rota covering 24*7*365 call outs Senior Engineer good to have experience/skills * Netapp - major advantage to hold this * Retail/Point of Sale (POS) Personal Attribute * Highly enthusiastic, approachable and self motivated to achieve targets. * Ability to prioritise workload effectively. * A Methodical and accurate approach to the job is critical. * Team focused - a genuine passion to deliver excellence through continuous development and improvement. * Be able to remain positive at all times and influence those around you. * Excellent communicator who can remain objective and focussed with Customers and Internal Agencies alike. * Good relationship management skills. * Previous Senior Field Engineer experience desirable. * Analytical, with exceptional attention to detail. * Innovative thinking, in terms of service quality and improvements * Full UK Driving Licence. In applying for this position, you consent to your personal data being shared with the specified employer and for your details to remain with GTS for as long as is necessary to process your application. See our Privacy Notice for full information Global Technology Solutions is acting as an Employment Agency in relation to this vacancy.
16/05/2024
Full time
Ideal location - Manchester Salary - £27000 - 29000 Hours: Monday to Friday, pick up kit by 08:30 as local PUDO working on client site up till 17:30, overtime available Benefits: Car + Parking cards and Fuel cards + Pension + on call payment Start date - ASAP We have an exciting opportunity for a senior field service engineer to join a blue chip organisation on a permanent basis in Manchester. Senior Field Service Engineer will be required to fault find and repair a variety of IT equipment including Servers, PCs, Laptop, printer and point of sales systems (EPOS) at various Customer locations across the UK. Ensuring company processes, procedures and contractual requirements are followed whilst maintaining high levels of customer service. You must be an experienced time served "Field Service Engineer", a confident communicator at all levels and work well as part of a team. The position will report into Team Leader/Resource Managers (Field) but will also have critical relationships with Call Control and Technical vetting teams with Field Services. The role will involve: * Capable of working independently and remotely, required to perform on site troubleshooting on a wide range of products in a software or hardware environment. * Proficient in the installation, configuration and support of Server/Desktop/EPOS environment and in addition, be able to connect and install client software for various networking platforms at various customer locations in the UK. * Ability to follow documented procedures and adhere to safety and ESD precautions at all times. * Be able to demonstrate strong problem solving techniques with the ability to adapt and learn on the job. * Develop, grow and maintain professional working relationships with all internal stakeholders. * Call Control, Tech Vetting teams. * Ensure process, procedural and contractual agreements are being followed correctly. * Endeavour to provide all customers with the best level of customer service and support. * Complete documentation including Field Service Call reports and Customer Checksheets and ensure these are returned within SLA timescales. * Work proactively with call allocators to ensure SLA's are met in the most economic way. * Have a solid understanding of customers SLA requirement and use initiative to ensure the expectation is met and exceeded * Any additional activity as directed by Senior Management Key Experience * Have an excellent working knowledge of Server/PC architecture, knowledge of Windows Operating systems, break fix and troubleshooting of Servers, Desktops, EPOS, Laptops, and Printers. * Manufacturer recognised accreditations, ie HP/IBM/Dell. Both Server and Desktop. * At least 6 years customer facing IT industry experience. * Capable of working independently on a wide range of products. * Excellent communication skills. * Excellent proven organisational and customer service skills. * Able to work under pressure. * Able to maintain a consistent high standard of quality and professionalism. * Excellent Time management skills. * Team Player - ability to work as part of the team to deliver operational excellence. * Awareness of ITIL methodologies and best practice. * Previous employment in a similar role. * Ability to show flexibility to help the changing needs of the team. * Adhere to company standards and procedures at all times unless otherwise directed. * Maintain excellent customer relationships. * Maintain high levels of Punctuality, Communication, Attitude, Competence and Quality of Service * Maintain all appropriate Manufacturer Server Accreditations where app Senior Engineer main skills * MUST be able to obtain security clearances, BPSS & SC, (NPPV3 great to have but not essential) * X86 Server Hardware break fix Skills (can replace all components, upgrade Bios/firmware) * Laptop Hardware break fix skills (replace all components) * Must be able to hold Main vendor certifications on Servers & Laptops (Dell, HP, Lenovo) * Will form part of an on call rota covering 24*7*365 call outs Senior Engineer good to have experience/skills * Netapp - major advantage to hold this * Retail/Point of Sale (POS) Personal Attribute * Highly enthusiastic, approachable and self motivated to achieve targets. * Ability to prioritise workload effectively. * A Methodical and accurate approach to the job is critical. * Team focused - a genuine passion to deliver excellence through continuous development and improvement. * Be able to remain positive at all times and influence those around you. * Excellent communicator who can remain objective and focussed with Customers and Internal Agencies alike. * Good relationship management skills. * Previous Senior Field Engineer experience desirable. * Analytical, with exceptional attention to detail. * Innovative thinking, in terms of service quality and improvements * Full UK Driving Licence. In applying for this position, you consent to your personal data being shared with the specified employer and for your details to remain with GTS for as long as is necessary to process your application. See our Privacy Notice for full information Global Technology Solutions is acting as an Employment Agency in relation to this vacancy.
Global Technology Solutions Ltd
Stoke-on-trent, Staffordshire
Ideal location - Stoke on Trent Salary - £27000 - 29000 Hours: Monday to Friday, pick up kit by 08:30 as local PUDO working on client site up till 17:30, overtime available Benefits: Car + Parking cards and Fuel cards + Pension + on call payment Start date - ASAP We have an exciting opportunity for a senior field service engineer to join a blue chip organisation on a permanent basis in Stoke on Trent Senior Field Service Engineer will be required to fault find and repair a variety of IT equipment including Servers, PCs, Laptop, printer and point of sales systems (EPOS) at various Customer locations across the UK. Ensuring company processes, procedures and contractual requirements are followed whilst maintaining high levels of customer service. You must be an experienced time served "Field Service Engineer", a confident communicator at all levels and work well as part of a team. The position will report into Team Leader/Resource Managers (Field) but will also have critical relationships with Call Control and Technical vetting teams with Field Services. The role will involve: * Capable of working independently and remotely, required to perform on site troubleshooting on a wide range of products in a software or hardware environment. * Proficient in the installation, configuration and support of Server/Desktop/EPOS environment and in addition, be able to connect and install client software for various networking platforms at various customer locations in the UK. * Ability to follow documented procedures and adhere to safety and ESD precautions at all times. * Be able to demonstrate strong problem solving techniques with the ability to adapt and learn on the job. * Develop, grow and maintain professional working relationships with all internal stakeholders. * Call Control, Tech Vetting teams. * Ensure process, procedural and contractual agreements are being followed correctly. * Endeavour to provide all customers with the best level of customer service and support. * Complete documentation including Field Service Call reports and Customer Checksheets and ensure these are returned within SLA timescales. * Work proactively with call allocators to ensure SLA's are met in the most economic way. * Have a solid understanding of customers SLA requirement and use initiative to ensure the expectation is met and exceeded * Any additional activity as directed by Senior Management Key Experience * Have an excellent working knowledge of Server/PC architecture, knowledge of Windows Operating systems, break fix and troubleshooting of Servers, Desktops, EPOS, Laptops, and Printers. * Manufacturer recognised accreditations, ie HP/IBM/Dell. Both Server and Desktop. * At least 6 years customer facing IT industry experience. * Capable of working independently on a wide range of products. * Excellent communication skills. * Excellent proven organisational and customer service skills. * Able to work under pressure. * Able to maintain a consistent high standard of quality and professionalism. * Excellent Time management skills. * Team Player - ability to work as part of the team to deliver operational excellence. * Awareness of ITIL methodologies and best practice. * Previous employment in a similar role. * Ability to show flexibility to help the changing needs of the team. * Adhere to company standards and procedures at all times unless otherwise directed. * Maintain excellent customer relationships. * Maintain high levels of Punctuality, Communication, Attitude, Competence and Quality of Service * Maintain all appropriate Manufacturer Server Accreditations where app Senior Engineer main skills * MUST be able to obtain security clearances, BPSS & SC, (NPPV3 great to have but not essential) * X86 Server Hardware break fix Skills (can replace all components, upgrade Bios/firmware) * Laptop Hardware break fix skills (replace all components) * Must be able to hold Main vendor certifications on Servers & Laptops (Dell, HP, Lenovo) * Will form part of an on call rota covering 24*7*365 call outs Senior Engineer good to have experience/skills * Netapp - major advantage to hold this * Retail/Point of Sale (POS) Personal Attribute * Highly enthusiastic, approachable and self motivated to achieve targets. * Ability to prioritise workload effectively. * A Methodical and accurate approach to the job is critical. * Team focused - a genuine passion to deliver excellence through continuous development and improvement. * Be able to remain positive at all times and influence those around you. * Excellent communicator who can remain objective and focussed with Customers and Internal Agencies alike. * Good relationship management skills. * Previous Senior Field Engineer experience desirable. * Analytical, with exceptional attention to detail. * Innovative thinking, in terms of service quality and improvements * Full UK Driving Licence. "In applying for this position, you consent to your personal data being shared with the specified employer and for your details to remain with GTS for as long as is necessary to process your application. See our Privacy Notice for full information Global Technology Solutions is acting as an Employment Agency in relation to this vacancy.
16/05/2024
Full time
Ideal location - Stoke on Trent Salary - £27000 - 29000 Hours: Monday to Friday, pick up kit by 08:30 as local PUDO working on client site up till 17:30, overtime available Benefits: Car + Parking cards and Fuel cards + Pension + on call payment Start date - ASAP We have an exciting opportunity for a senior field service engineer to join a blue chip organisation on a permanent basis in Stoke on Trent Senior Field Service Engineer will be required to fault find and repair a variety of IT equipment including Servers, PCs, Laptop, printer and point of sales systems (EPOS) at various Customer locations across the UK. Ensuring company processes, procedures and contractual requirements are followed whilst maintaining high levels of customer service. You must be an experienced time served "Field Service Engineer", a confident communicator at all levels and work well as part of a team. The position will report into Team Leader/Resource Managers (Field) but will also have critical relationships with Call Control and Technical vetting teams with Field Services. The role will involve: * Capable of working independently and remotely, required to perform on site troubleshooting on a wide range of products in a software or hardware environment. * Proficient in the installation, configuration and support of Server/Desktop/EPOS environment and in addition, be able to connect and install client software for various networking platforms at various customer locations in the UK. * Ability to follow documented procedures and adhere to safety and ESD precautions at all times. * Be able to demonstrate strong problem solving techniques with the ability to adapt and learn on the job. * Develop, grow and maintain professional working relationships with all internal stakeholders. * Call Control, Tech Vetting teams. * Ensure process, procedural and contractual agreements are being followed correctly. * Endeavour to provide all customers with the best level of customer service and support. * Complete documentation including Field Service Call reports and Customer Checksheets and ensure these are returned within SLA timescales. * Work proactively with call allocators to ensure SLA's are met in the most economic way. * Have a solid understanding of customers SLA requirement and use initiative to ensure the expectation is met and exceeded * Any additional activity as directed by Senior Management Key Experience * Have an excellent working knowledge of Server/PC architecture, knowledge of Windows Operating systems, break fix and troubleshooting of Servers, Desktops, EPOS, Laptops, and Printers. * Manufacturer recognised accreditations, ie HP/IBM/Dell. Both Server and Desktop. * At least 6 years customer facing IT industry experience. * Capable of working independently on a wide range of products. * Excellent communication skills. * Excellent proven organisational and customer service skills. * Able to work under pressure. * Able to maintain a consistent high standard of quality and professionalism. * Excellent Time management skills. * Team Player - ability to work as part of the team to deliver operational excellence. * Awareness of ITIL methodologies and best practice. * Previous employment in a similar role. * Ability to show flexibility to help the changing needs of the team. * Adhere to company standards and procedures at all times unless otherwise directed. * Maintain excellent customer relationships. * Maintain high levels of Punctuality, Communication, Attitude, Competence and Quality of Service * Maintain all appropriate Manufacturer Server Accreditations where app Senior Engineer main skills * MUST be able to obtain security clearances, BPSS & SC, (NPPV3 great to have but not essential) * X86 Server Hardware break fix Skills (can replace all components, upgrade Bios/firmware) * Laptop Hardware break fix skills (replace all components) * Must be able to hold Main vendor certifications on Servers & Laptops (Dell, HP, Lenovo) * Will form part of an on call rota covering 24*7*365 call outs Senior Engineer good to have experience/skills * Netapp - major advantage to hold this * Retail/Point of Sale (POS) Personal Attribute * Highly enthusiastic, approachable and self motivated to achieve targets. * Ability to prioritise workload effectively. * A Methodical and accurate approach to the job is critical. * Team focused - a genuine passion to deliver excellence through continuous development and improvement. * Be able to remain positive at all times and influence those around you. * Excellent communicator who can remain objective and focussed with Customers and Internal Agencies alike. * Good relationship management skills. * Previous Senior Field Engineer experience desirable. * Analytical, with exceptional attention to detail. * Innovative thinking, in terms of service quality and improvements * Full UK Driving Licence. "In applying for this position, you consent to your personal data being shared with the specified employer and for your details to remain with GTS for as long as is necessary to process your application. See our Privacy Notice for full information Global Technology Solutions is acting as an Employment Agency in relation to this vacancy.
Ideal location - Essex Salary - £27000 - 29000 Hours: Monday to Friday, pick up kit by 08:30 as local PUDO working on client site up till 17:30, overtime available Benefits: Car + Parking cards and Fuel cards + Pension + on call payment Start date - ASAP We have an exciting opportunity for a senior field service engineer to join a blue chip organisation on a permanent basis in Essex. Senior Field Service Engineer will be required to fault find and repair a variety of IT equipment including Servers, PCs, Laptop, printer and point of sales systems (EPOS) at various Customer locations across the UK. Ensuring company processes, procedures and contractual requirements are followed whilst maintaining high levels of customer service. You must be an experienced time served "Field Service Engineer", a confident communicator at all levels and work well as part of a team. The position will report into Team Leader/Resource Managers (Field) but will also have critical relationships with Call Control and Technical vetting teams with Field Services. The role will involve: * Capable of working independently and remotely, required to perform on site troubleshooting on a wide range of products in a software or hardware environment. * Proficient in the installation, configuration and support of Server/Desktop/EPOS environment and in addition, be able to connect and install client software for various networking platforms at various customer locations in the UK. * Ability to follow documented procedures and adhere to safety and ESD precautions at all times. * Be able to demonstrate strong problem solving techniques with the ability to adapt and learn on the job. * Develop, grow and maintain professional working relationships with all internal stakeholders Call Control, Tech Vetting teams. * Ensure process, procedural and contractual agreements are being followed correctly. * Endeavour to provide all customers with the best level of customer service and support. * Complete documentation including Field Service Call reports and Customer Checksheets and ensure these are returned within SLA timescales. * Work proactively with call allocators to ensure SLA's are met in the most economic way. * Have a solid understanding of customers SLA requirement and use initiative to ensure the expectation is met and exceeded * Any additional activity as directed by Senior Management Key Experience * Have an excellent working knowledge of Server/PC architecture, knowledge of Windows Operating systems, break fix and troubleshooting of Servers, Desktops, EPOS, Laptops, and Printers. * Manufacturer recognised accreditations, ie HP/IBM/Dell. Both Server and Desktop. * At least 6 years customer facing IT industry experience. * Capable of working independently on a wide range of products. * Excellent communication skills. * Excellent proven organisational and customer service skills. * Able to work under pressure. * Able to maintain a consistent high standard of quality and professionalism. * Excellent Time management skills. * Team Player - ability to work as part of the team to deliver operational excellence. * Awareness of ITIL methodologies and best practice. * Previous employment in a similar role. * Ability to show flexibility to help the changing needs of the team. * Adhere to company standards and procedures at all times unless otherwise directed. * Maintain excellent customer relationships. * Maintain high levels of Punctuality, Communication, Attitude, Competence and Quality of Service * Maintain all appropriate Manufacturer Server Accreditations where app Senior Engineer main skills * MUST be able to obtain security clearances, BPSS & SC, (NPPV3 great to have but not essential) * X86 Server Hardware break fix Skills (can replace all components, upgrade Bios/firmware) * Laptop Hardware break fix skills (replace all components) * Must be able to hold Main vendor certifications on Servers & Laptops (Dell, HP, Lenovo) * Will form part of an on call rota covering 24*7*365 call outs Senior Engineer good to have experience/skills * Netapp - major advantage to hold this * Retail/Point of Sale (POS) Personal Attribute * Highly enthusiastic, approachable and self motivated to achieve targets. * Ability to prioritise workload effectively. * A Methodical and accurate approach to the job is critical. * Team focused - a genuine passion to deliver excellence through continuous development and improvement. * Be able to remain positive at all times and influence those around you. * Excellent communicator who can remain objective and focussed with Customers and Internal Agencies alike. * Good relationship management skills. * Previous Senior Field Engineer experience desirable. * Analytical, with exceptional attention to detail. * Innovative thinking, in terms of service quality and improvements * Full UK Driving Licence. "In applying for this position, you consent to your personal data being shared with the specified employer and for your details to remain with GTS for as long as is necessary to process your application. See our Privacy Notice for full information Global Technology Solutions is acting as an Employment Agency in relation to this vacancy.
16/05/2024
Full time
Ideal location - Essex Salary - £27000 - 29000 Hours: Monday to Friday, pick up kit by 08:30 as local PUDO working on client site up till 17:30, overtime available Benefits: Car + Parking cards and Fuel cards + Pension + on call payment Start date - ASAP We have an exciting opportunity for a senior field service engineer to join a blue chip organisation on a permanent basis in Essex. Senior Field Service Engineer will be required to fault find and repair a variety of IT equipment including Servers, PCs, Laptop, printer and point of sales systems (EPOS) at various Customer locations across the UK. Ensuring company processes, procedures and contractual requirements are followed whilst maintaining high levels of customer service. You must be an experienced time served "Field Service Engineer", a confident communicator at all levels and work well as part of a team. The position will report into Team Leader/Resource Managers (Field) but will also have critical relationships with Call Control and Technical vetting teams with Field Services. The role will involve: * Capable of working independently and remotely, required to perform on site troubleshooting on a wide range of products in a software or hardware environment. * Proficient in the installation, configuration and support of Server/Desktop/EPOS environment and in addition, be able to connect and install client software for various networking platforms at various customer locations in the UK. * Ability to follow documented procedures and adhere to safety and ESD precautions at all times. * Be able to demonstrate strong problem solving techniques with the ability to adapt and learn on the job. * Develop, grow and maintain professional working relationships with all internal stakeholders Call Control, Tech Vetting teams. * Ensure process, procedural and contractual agreements are being followed correctly. * Endeavour to provide all customers with the best level of customer service and support. * Complete documentation including Field Service Call reports and Customer Checksheets and ensure these are returned within SLA timescales. * Work proactively with call allocators to ensure SLA's are met in the most economic way. * Have a solid understanding of customers SLA requirement and use initiative to ensure the expectation is met and exceeded * Any additional activity as directed by Senior Management Key Experience * Have an excellent working knowledge of Server/PC architecture, knowledge of Windows Operating systems, break fix and troubleshooting of Servers, Desktops, EPOS, Laptops, and Printers. * Manufacturer recognised accreditations, ie HP/IBM/Dell. Both Server and Desktop. * At least 6 years customer facing IT industry experience. * Capable of working independently on a wide range of products. * Excellent communication skills. * Excellent proven organisational and customer service skills. * Able to work under pressure. * Able to maintain a consistent high standard of quality and professionalism. * Excellent Time management skills. * Team Player - ability to work as part of the team to deliver operational excellence. * Awareness of ITIL methodologies and best practice. * Previous employment in a similar role. * Ability to show flexibility to help the changing needs of the team. * Adhere to company standards and procedures at all times unless otherwise directed. * Maintain excellent customer relationships. * Maintain high levels of Punctuality, Communication, Attitude, Competence and Quality of Service * Maintain all appropriate Manufacturer Server Accreditations where app Senior Engineer main skills * MUST be able to obtain security clearances, BPSS & SC, (NPPV3 great to have but not essential) * X86 Server Hardware break fix Skills (can replace all components, upgrade Bios/firmware) * Laptop Hardware break fix skills (replace all components) * Must be able to hold Main vendor certifications on Servers & Laptops (Dell, HP, Lenovo) * Will form part of an on call rota covering 24*7*365 call outs Senior Engineer good to have experience/skills * Netapp - major advantage to hold this * Retail/Point of Sale (POS) Personal Attribute * Highly enthusiastic, approachable and self motivated to achieve targets. * Ability to prioritise workload effectively. * A Methodical and accurate approach to the job is critical. * Team focused - a genuine passion to deliver excellence through continuous development and improvement. * Be able to remain positive at all times and influence those around you. * Excellent communicator who can remain objective and focussed with Customers and Internal Agencies alike. * Good relationship management skills. * Previous Senior Field Engineer experience desirable. * Analytical, with exceptional attention to detail. * Innovative thinking, in terms of service quality and improvements * Full UK Driving Licence. "In applying for this position, you consent to your personal data being shared with the specified employer and for your details to remain with GTS for as long as is necessary to process your application. See our Privacy Notice for full information Global Technology Solutions is acting as an Employment Agency in relation to this vacancy.