AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
29/04/2024
Project-based
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
Senior Security Systems Design Engineer I am looking to hire an experienced (3-5 Years) Senior Security Systems Design Engineer on behalf of a prestigious client of mine, on a permanent basis. Our clients are looking for a motivated individual who will have experience of, and the continued desire to, see their designs through from Design to Construction, Commissioning and handover etc. Candidates wishing to apply for this position will be heavily experienced in the Technical Design Space (Electrical and Mechanical Requirements) and have the capabilities, of successfully grasping the fundamentals of a new development ie Hotel, Stadium, Airport - It goes without saying, it is imperative that the successful candidate has Practical experience! To be considered for this position you will be well versed with the RIBA process and the following Softwares ; AutoCAD, REVIT, Bluebeam Revu . You will be responsible for and able to demonstrate (not limited to), Project Planning, client briefing, developing design, task quality control procedures, resource planning and working within budgets. It is essential that you will have previously designed some or all of the following; Video Surveillance, Access Control, Intruder detection, Duress, Intercom, Control Rooms, Integrated Security Management Platforms, Gates/Barriers, Turnstiles, Car Parking Management, Key Management or Drone detection and will have previously monitored both on and off-site construction works and testing of electronic security systems. You will be a sleeves-rolled-up individual, with excellent attention to detail, who is able to deliver in various Architectural Projects. Salary: Up to £67,000 per annum Location: On site in London 3 days a week, the remainder working remotely. (Probation period fully on site)
25/04/2024
Full time
Senior Security Systems Design Engineer I am looking to hire an experienced (3-5 Years) Senior Security Systems Design Engineer on behalf of a prestigious client of mine, on a permanent basis. Our clients are looking for a motivated individual who will have experience of, and the continued desire to, see their designs through from Design to Construction, Commissioning and handover etc. Candidates wishing to apply for this position will be heavily experienced in the Technical Design Space (Electrical and Mechanical Requirements) and have the capabilities, of successfully grasping the fundamentals of a new development ie Hotel, Stadium, Airport - It goes without saying, it is imperative that the successful candidate has Practical experience! To be considered for this position you will be well versed with the RIBA process and the following Softwares ; AutoCAD, REVIT, Bluebeam Revu . You will be responsible for and able to demonstrate (not limited to), Project Planning, client briefing, developing design, task quality control procedures, resource planning and working within budgets. It is essential that you will have previously designed some or all of the following; Video Surveillance, Access Control, Intruder detection, Duress, Intercom, Control Rooms, Integrated Security Management Platforms, Gates/Barriers, Turnstiles, Car Parking Management, Key Management or Drone detection and will have previously monitored both on and off-site construction works and testing of electronic security systems. You will be a sleeves-rolled-up individual, with excellent attention to detail, who is able to deliver in various Architectural Projects. Salary: Up to £67,000 per annum Location: On site in London 3 days a week, the remainder working remotely. (Probation period fully on site)
Digital IC Design Engineer | Contract | Cambridge | Up to £70ph DOE | Outside IR35 | Hybrid Are you looking for a new opportunity within the Digital IC Design space? Are you looking to offer your expertise to help scale a growing team? Are you looking to join a fast-growing company working on industry leading technologies in Smartphones, AR/VR & Wearables? Then this might just be the role for you. We are working with an industry leading electronics company that operate in the precision motion solutions space with their work being applied in the Smartphone, AR/VR and Wearables sectors. They are looking to bring in a selection of IC Design Engineers with a digital bias to deliver industry leading IC RTL Design and technical mentoring to a highly skilled, close-knit team. Key Responsibilities: Digital design development for custom IC Integration including the writing of IP design specifications, coding Verilog and SystemVerilog models for simulation, synthesis and static timing analysis and writing automated simulation and verification build scripts. Building automated pre-silicon verification environment whilst supporting early development of Embedded firmware throughout start of project. Integrate and partition in-house designs and IP from third parties and wrap with modelling logic to represent mixed signal design element. Asist with the validation of new silicon chips with a mix between CI/CD automation and manual tests through electrical test equipment. Qualifications and Experience: Strong experience in digital custom IC design. Strong experience in digital IC verification (UVM, SVA, VIP, and UPF), for ASIC implementation. Strong RTL coding with Verilog and System Verilog. Strong knowledge of interface technology (I2C, SPI, UART, SWD, JTAG, etc). Strong knowledge of on-chip bus protocol (AMBA AHB, APB, AXI-Stream, etc). Experience with Linux OS, revision control (Git) and Scripting languages (Bash, Tcl, and Python). Experience with EDA tools for simulation (Siemens Quest), Synthesis (DesignCompiler). Pay rate: Up to £70 ph D.O.E outside IR35
23/04/2024
Project-based
Digital IC Design Engineer | Contract | Cambridge | Up to £70ph DOE | Outside IR35 | Hybrid Are you looking for a new opportunity within the Digital IC Design space? Are you looking to offer your expertise to help scale a growing team? Are you looking to join a fast-growing company working on industry leading technologies in Smartphones, AR/VR & Wearables? Then this might just be the role for you. We are working with an industry leading electronics company that operate in the precision motion solutions space with their work being applied in the Smartphone, AR/VR and Wearables sectors. They are looking to bring in a selection of IC Design Engineers with a digital bias to deliver industry leading IC RTL Design and technical mentoring to a highly skilled, close-knit team. Key Responsibilities: Digital design development for custom IC Integration including the writing of IP design specifications, coding Verilog and SystemVerilog models for simulation, synthesis and static timing analysis and writing automated simulation and verification build scripts. Building automated pre-silicon verification environment whilst supporting early development of Embedded firmware throughout start of project. Integrate and partition in-house designs and IP from third parties and wrap with modelling logic to represent mixed signal design element. Asist with the validation of new silicon chips with a mix between CI/CD automation and manual tests through electrical test equipment. Qualifications and Experience: Strong experience in digital custom IC design. Strong experience in digital IC verification (UVM, SVA, VIP, and UPF), for ASIC implementation. Strong RTL coding with Verilog and System Verilog. Strong knowledge of interface technology (I2C, SPI, UART, SWD, JTAG, etc). Strong knowledge of on-chip bus protocol (AMBA AHB, APB, AXI-Stream, etc). Experience with Linux OS, revision control (Git) and Scripting languages (Bash, Tcl, and Python). Experience with EDA tools for simulation (Siemens Quest), Synthesis (DesignCompiler). Pay rate: Up to £70 ph D.O.E outside IR35
Position: Mechanical Technician Pay rate: £23.82 p/h inside IR35. location: Stevenage, UK Role Type: 12 Month contract with extension Position: Onsite IO Associates seeks a Panels Surface Treatments Technician for the Stevenage site . Join a global aerospace leader specializing in commercial and military aircraft, helicopters, defense, and space sectors. This role offers a chance to contribute to innovative projects within a dynamic team shaping the future of aviation and space systems. Responsibilities Collaborating within an AIT Operations team to consistently meet quality standards and adhere to production plans. Following LDS guidelines for methods and procedures, while ensuring compliance with standard processes, area requirements, and safety protocols. Upholding Cleanroom Regulations, local safety guidelines, and the 5S policy within the work area. Providing progress updates to Lead Technicians or Team Leads as needed, participating in shop floor meetings, supporting trainees, and contributing to continuous improvement efforts. Skills required Proficient in interpreting detailed drawings and electronic work instructions within prescribed procedures. Skilled in following procedures with defined checkpoints and quality gates. Experienced in various industries such as Space, Aerospace, Automotive, Motorsport, etc. Capable of working at elevated heights. Competent in preparing paint compounds according to manufacturer specifications. This is an excellent opportunity to work for an international company that encourages and facilitates personal growth. Please apply or get in touch with Munish or Email
22/04/2024
Project-based
Position: Mechanical Technician Pay rate: £23.82 p/h inside IR35. location: Stevenage, UK Role Type: 12 Month contract with extension Position: Onsite IO Associates seeks a Panels Surface Treatments Technician for the Stevenage site . Join a global aerospace leader specializing in commercial and military aircraft, helicopters, defense, and space sectors. This role offers a chance to contribute to innovative projects within a dynamic team shaping the future of aviation and space systems. Responsibilities Collaborating within an AIT Operations team to consistently meet quality standards and adhere to production plans. Following LDS guidelines for methods and procedures, while ensuring compliance with standard processes, area requirements, and safety protocols. Upholding Cleanroom Regulations, local safety guidelines, and the 5S policy within the work area. Providing progress updates to Lead Technicians or Team Leads as needed, participating in shop floor meetings, supporting trainees, and contributing to continuous improvement efforts. Skills required Proficient in interpreting detailed drawings and electronic work instructions within prescribed procedures. Skilled in following procedures with defined checkpoints and quality gates. Experienced in various industries such as Space, Aerospace, Automotive, Motorsport, etc. Capable of working at elevated heights. Competent in preparing paint compounds according to manufacturer specifications. This is an excellent opportunity to work for an international company that encourages and facilitates personal growth. Please apply or get in touch with Munish or Email