Skills required: Experience within renewables industry, energy storage either in consultancy, DNO, ICP, renewable energy developer, or alternatively another engineering environment Knowledge and understanding of international and UK standards Knowledge of AutoCAD Experience in Solar PV design requirements (desirable) Familiarity with the interactions between developer, EPC and TA in utility-scale PV project development Knowledge of Energy Storage Systems (desirable) Experience with CDM regulations (desirable Key Responsibilities: Production of Civil and Structural Designs that can be constructed in compliance with standards and CDM requirements Evaluation of civil works requirements for solar installations (concrete foundations, piling programs, internal road design ) Review of existing studies and surveys and define scope as per projects' needs and specifications (flood risk assessment, load bearing survey, archaeological protection measures, geotechnical, topography, hydrology, hydraulics ) Reading design specifications, employer's requirements and technical drawings Define detailed scope of works and specifications of Subcontractors for civil topics. Provide/coordinate preliminary civil designs (cut and fill analysis, Gravel roads, drainage, etc.) based on the project type, location and needs. Review and acceptance of engineering designs from external parties. Review and acceptance of the submitted engineering reports, ensuring their conformity with the agreed scope, and communicate the engineering design parameters to the internal departments (structural, AC/DC, etc). Providing engineering and technical expertise and guidance in identifying, analysing and resolving project challenges Support the construction department in the implementation, during the project realization phase Create and maintain a pool of qualified outsourcing services able to provide engineering services (designs, testing, assessments, etc.) Work as the main contact point in communication and coordination of technical matters between Belectric and the civil outsourcing services. Provide technical support and expertise in civil topics with the client engineering team and technical consultants. Close exchange with colleagues in layout design, purchasing, project development, project management and the subsidiaries ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
02/05/2024
Full time
Skills required: Experience within renewables industry, energy storage either in consultancy, DNO, ICP, renewable energy developer, or alternatively another engineering environment Knowledge and understanding of international and UK standards Knowledge of AutoCAD Experience in Solar PV design requirements (desirable) Familiarity with the interactions between developer, EPC and TA in utility-scale PV project development Knowledge of Energy Storage Systems (desirable) Experience with CDM regulations (desirable Key Responsibilities: Production of Civil and Structural Designs that can be constructed in compliance with standards and CDM requirements Evaluation of civil works requirements for solar installations (concrete foundations, piling programs, internal road design ) Review of existing studies and surveys and define scope as per projects' needs and specifications (flood risk assessment, load bearing survey, archaeological protection measures, geotechnical, topography, hydrology, hydraulics ) Reading design specifications, employer's requirements and technical drawings Define detailed scope of works and specifications of Subcontractors for civil topics. Provide/coordinate preliminary civil designs (cut and fill analysis, Gravel roads, drainage, etc.) based on the project type, location and needs. Review and acceptance of engineering designs from external parties. Review and acceptance of the submitted engineering reports, ensuring their conformity with the agreed scope, and communicate the engineering design parameters to the internal departments (structural, AC/DC, etc). Providing engineering and technical expertise and guidance in identifying, analysing and resolving project challenges Support the construction department in the implementation, during the project realization phase Create and maintain a pool of qualified outsourcing services able to provide engineering services (designs, testing, assessments, etc.) Work as the main contact point in communication and coordination of technical matters between Belectric and the civil outsourcing services. Provide technical support and expertise in civil topics with the client engineering team and technical consultants. Close exchange with colleagues in layout design, purchasing, project development, project management and the subsidiaries ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
Lead Electrical Engineer - Inside IR35 - €750 per day! We are recruiting an Electrical Engineer for a project in County Clare, Ireland, which is expected to run until the end of February 2026. Our client is in the process of transitioning a power station's primary fuel from coal to heavy fuel oil. The works require the construction of two new heavy fuel oil tanks, new auxiliary boilers, new ash injection system, upgrade of the existing HFO Systems, ancillary systems and modifications to the existing site infrastructure. As an Electrical Engineer you will be tasked to manage the key responsibilities which are listed below: - Perform role of lead electrical engineer and be responsible for the electrical engineering works on site for the successful delivery of the emergency generation projects. Manage Site teams (as required), and liaison with Station Electrical and Instrumentation (E&I) teams. Liaise with Control & Instrumentation, Mechanical and Civil design teams to ensure delivery co-ordination on multi-disciplinary projects. Ensure that electrical systems are installed, tested, and operated safely and efficiently in accordance with regulations, standards, and guidelines. Co-ordinate electrical testing and commissioning activities on Low Voltage (LV), Medium Voltage (MV) and High Voltage (HV) systems and provide advice on testing and commissioning procedures and documentation. Support the management of projects from installation, commissioning, and handover. Support the team of electrical engineers delivering engineering design and support services for generating technologies. Support for the Safety Systems at site and apply a high level of safety standards in every aspect of the work. Skills and Experience Proven track record of significant experience in the power generation industry. A minimum of 7 years' relevant experience is required. Design, and Construction or Commissioning experience, is preferred. Extensive knowledge of electrical equipment utilised in power plant projects, preferably including LV and MV Proven ability to deliver on the key responsibilities outlined above. A proven track record in delivering complex engineering projects and ability to manage multiple projects. Experience of Project Management tools would be an advantage. Working knowledge of Health, Safety and Environment Standards, and Electrical Safety procedures An EU/British passport will be required for this role, as the role requires onsite working Monday to Friday. The daily rate on offer is €750 all-inclusive (no expenses). Further information is available upon request.
30/04/2024
Project-based
Lead Electrical Engineer - Inside IR35 - €750 per day! We are recruiting an Electrical Engineer for a project in County Clare, Ireland, which is expected to run until the end of February 2026. Our client is in the process of transitioning a power station's primary fuel from coal to heavy fuel oil. The works require the construction of two new heavy fuel oil tanks, new auxiliary boilers, new ash injection system, upgrade of the existing HFO Systems, ancillary systems and modifications to the existing site infrastructure. As an Electrical Engineer you will be tasked to manage the key responsibilities which are listed below: - Perform role of lead electrical engineer and be responsible for the electrical engineering works on site for the successful delivery of the emergency generation projects. Manage Site teams (as required), and liaison with Station Electrical and Instrumentation (E&I) teams. Liaise with Control & Instrumentation, Mechanical and Civil design teams to ensure delivery co-ordination on multi-disciplinary projects. Ensure that electrical systems are installed, tested, and operated safely and efficiently in accordance with regulations, standards, and guidelines. Co-ordinate electrical testing and commissioning activities on Low Voltage (LV), Medium Voltage (MV) and High Voltage (HV) systems and provide advice on testing and commissioning procedures and documentation. Support the management of projects from installation, commissioning, and handover. Support the team of electrical engineers delivering engineering design and support services for generating technologies. Support for the Safety Systems at site and apply a high level of safety standards in every aspect of the work. Skills and Experience Proven track record of significant experience in the power generation industry. A minimum of 7 years' relevant experience is required. Design, and Construction or Commissioning experience, is preferred. Extensive knowledge of electrical equipment utilised in power plant projects, preferably including LV and MV Proven ability to deliver on the key responsibilities outlined above. A proven track record in delivering complex engineering projects and ability to manage multiple projects. Experience of Project Management tools would be an advantage. Working knowledge of Health, Safety and Environment Standards, and Electrical Safety procedures An EU/British passport will be required for this role, as the role requires onsite working Monday to Friday. The daily rate on offer is €750 all-inclusive (no expenses). Further information is available upon request.
Dileigh Consulting Engineers Pty Ltd (Dileigh) is seeking an experienced AutoCAD draftsperson or civil designer on a full-time basis to assist our design section, predominantly with subdivision design and documentation. Dileigh is a Yeppoon civil and structural engineering consultancy, providing technical-based engineering support for civil and structural construction contractors and local government authorities. Our area of expertise is in the civil and structural construction industry, providing a complete range of services and solutions for all stages of the project life cycle from planning, conceptualization detailed design, and documentation. The successful applicant should have experience in: - Subdivision design and documentation (roads, stormwater, sewer, water) Liaison with local government and service authorities Responsibilities will include but not be limited to: - Provide plans and documentation for development applications, tenders, and construction. Liaising and coordination with all relevant stakeholders including architects, engineers, planners, and contractors Identify cost-effective and practical solutions to design variations Prepare final drawings and documentation for the client Ensure that all works undertaken are in accordance with appropriate professional and technical standards and practices Selection Criteria To be considered for this role candidates must be able to meet the following criteria Have at least 3 years of design/drafting experience working for a civil design consultancy or a government agency in a similar role. Ability to work in a close team environment A strong understanding of AutoCAD Civil3D, or a high proficiency in a similar product and the ability to transfer those skills to AutoCAD & Civil3D. A sound knowledge of civil drafting and documentation for development assessment and construction Effective communication skills to co-ordinate with the client. assessment authorities, contractors, and other design disciplines Good Windows-based computer skills and proficiency in the use of the Microsoft Office suite of products Proven skills in defining, prioritising, organising, and completing tasks to meet deadlines An excellent eye for detail A friendly amiable personality and polite professional manner. The following qualities are not essential, but it would be desirable to have: - A tertiary qualification in Engineering (Diploma or higher), or the ability and desire to attain one. Remuneration: - Remuneration will be based on an individual's experience and negotiated with the successful applicant. Please submit your Resume using the "Apply for this job now" button. All applications will be treated as confidential.
22/04/2024
Full time
Dileigh Consulting Engineers Pty Ltd (Dileigh) is seeking an experienced AutoCAD draftsperson or civil designer on a full-time basis to assist our design section, predominantly with subdivision design and documentation. Dileigh is a Yeppoon civil and structural engineering consultancy, providing technical-based engineering support for civil and structural construction contractors and local government authorities. Our area of expertise is in the civil and structural construction industry, providing a complete range of services and solutions for all stages of the project life cycle from planning, conceptualization detailed design, and documentation. The successful applicant should have experience in: - Subdivision design and documentation (roads, stormwater, sewer, water) Liaison with local government and service authorities Responsibilities will include but not be limited to: - Provide plans and documentation for development applications, tenders, and construction. Liaising and coordination with all relevant stakeholders including architects, engineers, planners, and contractors Identify cost-effective and practical solutions to design variations Prepare final drawings and documentation for the client Ensure that all works undertaken are in accordance with appropriate professional and technical standards and practices Selection Criteria To be considered for this role candidates must be able to meet the following criteria Have at least 3 years of design/drafting experience working for a civil design consultancy or a government agency in a similar role. Ability to work in a close team environment A strong understanding of AutoCAD Civil3D, or a high proficiency in a similar product and the ability to transfer those skills to AutoCAD & Civil3D. A sound knowledge of civil drafting and documentation for development assessment and construction Effective communication skills to co-ordinate with the client. assessment authorities, contractors, and other design disciplines Good Windows-based computer skills and proficiency in the use of the Microsoft Office suite of products Proven skills in defining, prioritising, organising, and completing tasks to meet deadlines An excellent eye for detail A friendly amiable personality and polite professional manner. The following qualities are not essential, but it would be desirable to have: - A tertiary qualification in Engineering (Diploma or higher), or the ability and desire to attain one. Remuneration: - Remuneration will be based on an individual's experience and negotiated with the successful applicant. Please submit your Resume using the "Apply for this job now" button. All applications will be treated as confidential.