AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
29/04/2024
Project-based
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
Electrical Design Engineer Location: Derby Salary: £40,000 to £55,000 plus bonus & benefits Are you an Electrical Design Engineer who enjoys the cut and thrust of working on a varied landscape? Have you worked in regulated industries? I am working with a well-regarded consultancy who have over 25 years in industry, working with the likes of Dyson, Rolls Royce and similar corporations. This role with give an Electrical Design Engineer the opportunity to not only work on specific Electrical design but be exposed to a multidisciplinary Design Team seeing all mechanical and electronic elements to the projects. They boast a strong order book and this role is an expansion to the Design Team, if you have 3 years or more in industry, we want to hear from you. In this role you will be involved from the start of the project right through to inception, working closely with production and testing. What our client needs: Educated to HNC/HND or Degree in Electrical Engineering Experience within industry of over 3 years in Electrical Design Worked ideally in a consultancy or able to demonstrate multi-project experience Solidworks Electrical or E Plan design packages used PLC knowledge is a bonus and not essential What's in it for you? An opportunity to work with a plethora of household names in Automotive, Aerospace, Consumer Product and many more Flexible Start and Finish times Private Medical Cover Competitive Salary and Company Pension Contributions Please apply with an up to date CV or contact me
26/04/2024
Full time
Electrical Design Engineer Location: Derby Salary: £40,000 to £55,000 plus bonus & benefits Are you an Electrical Design Engineer who enjoys the cut and thrust of working on a varied landscape? Have you worked in regulated industries? I am working with a well-regarded consultancy who have over 25 years in industry, working with the likes of Dyson, Rolls Royce and similar corporations. This role with give an Electrical Design Engineer the opportunity to not only work on specific Electrical design but be exposed to a multidisciplinary Design Team seeing all mechanical and electronic elements to the projects. They boast a strong order book and this role is an expansion to the Design Team, if you have 3 years or more in industry, we want to hear from you. In this role you will be involved from the start of the project right through to inception, working closely with production and testing. What our client needs: Educated to HNC/HND or Degree in Electrical Engineering Experience within industry of over 3 years in Electrical Design Worked ideally in a consultancy or able to demonstrate multi-project experience Solidworks Electrical or E Plan design packages used PLC knowledge is a bonus and not essential What's in it for you? An opportunity to work with a plethora of household names in Automotive, Aerospace, Consumer Product and many more Flexible Start and Finish times Private Medical Cover Competitive Salary and Company Pension Contributions Please apply with an up to date CV or contact me
Job Title: Continuous Improvement Lead Industry: Medical Device Manufacturing Location: Plymouth Position Type: Permanent About The Company Join a pioneering team at a UK-based company specializing in advanced wound care and wound closure products. An organisation dedicated to developing and manufacturing world-leading solutions that enhance patient care. With a wealth of resources and specialized expertise, they offer a unique opportunity to be part of a team involved in every aspect of product design, development, and manufacture. Job Description Overview Responsible for all manufacturing processes, lean improvements, cost reduction, technical capability enhancement, process development, new production introduction delivering outputs in line with the business objectives on safety, quality, delivery, and cost. To execute site support activities and provide maintenance of all relevant operational equipment to ensure longevity and availability. Key Responsibilities Working closely alongside production operations to ensure the startup/shut down and continual running of all manufacturing processes. Establish & maintain standard processes within the validated process window plus optimisation of the technical performance for all manufacturing elements. Investigate and resolve issues related to the technical performance Optimize and deliver continuous improvement on existing manufacturing processes. Assist R&D with the introduction of new products and processes into manufacturing. Development of new standard processes and ensure optimal implementation into manufacturing supported with initial procedures, training and coaching of manufacturing. Collaborate with Group Engineering to execute or support assigned capital expenditure projects. Maintain all production equipment to the defined schedule and provide maintenance of the whole site requirements including, fire system testing/training, legionella checks, calibration, and contractor control. Qualifications Current experience in production environment support role (or 5 years min). Experience of developing and/or testing a process within a clean room manufacturing environment. Good understanding of Lean Principles (5S/VSM/Kaizen). Minimum of HNC level qualification in mechanical, electronic, industrial, or manufacturing engineering, or similar. Experience in process and product validation (sterile packaging according to ISO 11607 would be advantageous). Understanding of a quality management system (ISO13485/FDA) and medical device manufacturing advantageous. Very good MS Office skills, especially Excel. Strong organizational skills with the ability to communicate at all levels of the organization. Effective time management with the ability to set priorities. Good written and spoken English. Salary & Benefits Up to £45,000 per annum (Depending on Experience) Annual incentive bonus Life Cover Penson contribution up to 6% Dental Insurance Employee share scheme Other Information Exciting opportunity to lead a transformative project with significant organizational impact. Competitive salary package commensurate with experience. Opportunity to work with a dynamic and collaborative team focused on driving continuous improvement and excellence. How to Apply Apply now by submitting your CV below, alternatively you can send your CV. Please include "Continuous Improvement Lead" in the subject line
25/04/2024
Full time
Job Title: Continuous Improvement Lead Industry: Medical Device Manufacturing Location: Plymouth Position Type: Permanent About The Company Join a pioneering team at a UK-based company specializing in advanced wound care and wound closure products. An organisation dedicated to developing and manufacturing world-leading solutions that enhance patient care. With a wealth of resources and specialized expertise, they offer a unique opportunity to be part of a team involved in every aspect of product design, development, and manufacture. Job Description Overview Responsible for all manufacturing processes, lean improvements, cost reduction, technical capability enhancement, process development, new production introduction delivering outputs in line with the business objectives on safety, quality, delivery, and cost. To execute site support activities and provide maintenance of all relevant operational equipment to ensure longevity and availability. Key Responsibilities Working closely alongside production operations to ensure the startup/shut down and continual running of all manufacturing processes. Establish & maintain standard processes within the validated process window plus optimisation of the technical performance for all manufacturing elements. Investigate and resolve issues related to the technical performance Optimize and deliver continuous improvement on existing manufacturing processes. Assist R&D with the introduction of new products and processes into manufacturing. Development of new standard processes and ensure optimal implementation into manufacturing supported with initial procedures, training and coaching of manufacturing. Collaborate with Group Engineering to execute or support assigned capital expenditure projects. Maintain all production equipment to the defined schedule and provide maintenance of the whole site requirements including, fire system testing/training, legionella checks, calibration, and contractor control. Qualifications Current experience in production environment support role (or 5 years min). Experience of developing and/or testing a process within a clean room manufacturing environment. Good understanding of Lean Principles (5S/VSM/Kaizen). Minimum of HNC level qualification in mechanical, electronic, industrial, or manufacturing engineering, or similar. Experience in process and product validation (sterile packaging according to ISO 11607 would be advantageous). Understanding of a quality management system (ISO13485/FDA) and medical device manufacturing advantageous. Very good MS Office skills, especially Excel. Strong organizational skills with the ability to communicate at all levels of the organization. Effective time management with the ability to set priorities. Good written and spoken English. Salary & Benefits Up to £45,000 per annum (Depending on Experience) Annual incentive bonus Life Cover Penson contribution up to 6% Dental Insurance Employee share scheme Other Information Exciting opportunity to lead a transformative project with significant organizational impact. Competitive salary package commensurate with experience. Opportunity to work with a dynamic and collaborative team focused on driving continuous improvement and excellence. How to Apply Apply now by submitting your CV below, alternatively you can send your CV. Please include "Continuous Improvement Lead" in the subject line
Infoplus Technologies UK Ltd
Peterborough, Cambridgeshire
Role: Through this role, the successful candidate will have an excellent opportunity be involved in the design and development of controls and software for advanced diesel engine controls and/or hybrid systems controls. Responsibilities: Work with process partner teams (primarily Industrial Power Systems Division) to gather and develop requirements for the advanced diesel engines and hybrid power systems being developed for future, more sustainable, low carbon power systems. Create control algorithms/software models using Matlab, Simulink and Stateflow to meet diesel engine and/or hybrid power system software requirements. Conduct control system tuning/calibration activities on test bench and/or on test bed/machine to achieve desired system performance. Conduct sub-system FMEAs, documenting potential failure modes, identifying, and completing design and validation actions and managing subsequent updates. Plan and execute verification and validation testing for electronics/control system software in SiL, HiL or on-test bed or development machines. Troubleshoot and resolve electronics/control system issues encountered during engine or power system running. Competencies: Essential: Strong technical background (HNC or technical degree preferred in mechanical or electronic, electrical, control systems or automotive engineering) with 10+ Years of experience. Essential experience is working previously with Diesel Engines and having the Diesel Engine knowledge. Matlab, Simulink and Stateflow experience is essential, must've used it to create Control Algorithms. Significant, demonstrable experience of using Mathworks tools (Matlab, Simulink and Stateflow) for model-based software design and development to create Embedded software. This should have been gained in a diesel engine or hybrid power systems development environment. Ability to translate and develop customer requirements and objectives into production-ready software models. Knowledge of software FMEA and validation plan creation. Excellent communications skills & Teamwork Desirable: Good understanding of the off-highway industry, ideally gained through direct involvement in the development of powertrain, hydraulics, or other control systems. Experience of Caterpillar control software processes and tools. Experience of HiL test equipment and the ability to programme automated tests. Knowledge of software version control systems, ideally GiT or Clearcase. Knowledge of/prior experience of developing software to meet functional safety requirements.
25/04/2024
Role: Through this role, the successful candidate will have an excellent opportunity be involved in the design and development of controls and software for advanced diesel engine controls and/or hybrid systems controls. Responsibilities: Work with process partner teams (primarily Industrial Power Systems Division) to gather and develop requirements for the advanced diesel engines and hybrid power systems being developed for future, more sustainable, low carbon power systems. Create control algorithms/software models using Matlab, Simulink and Stateflow to meet diesel engine and/or hybrid power system software requirements. Conduct control system tuning/calibration activities on test bench and/or on test bed/machine to achieve desired system performance. Conduct sub-system FMEAs, documenting potential failure modes, identifying, and completing design and validation actions and managing subsequent updates. Plan and execute verification and validation testing for electronics/control system software in SiL, HiL or on-test bed or development machines. Troubleshoot and resolve electronics/control system issues encountered during engine or power system running. Competencies: Essential: Strong technical background (HNC or technical degree preferred in mechanical or electronic, electrical, control systems or automotive engineering) with 10+ Years of experience. Essential experience is working previously with Diesel Engines and having the Diesel Engine knowledge. Matlab, Simulink and Stateflow experience is essential, must've used it to create Control Algorithms. Significant, demonstrable experience of using Mathworks tools (Matlab, Simulink and Stateflow) for model-based software design and development to create Embedded software. This should have been gained in a diesel engine or hybrid power systems development environment. Ability to translate and develop customer requirements and objectives into production-ready software models. Knowledge of software FMEA and validation plan creation. Excellent communications skills & Teamwork Desirable: Good understanding of the off-highway industry, ideally gained through direct involvement in the development of powertrain, hydraulics, or other control systems. Experience of Caterpillar control software processes and tools. Experience of HiL test equipment and the ability to programme automated tests. Knowledge of software version control systems, ideally GiT or Clearcase. Knowledge of/prior experience of developing software to meet functional safety requirements.
I have an fantastic opportunity for a Principal Mechanical Engineer to work on an exciting 7 year framework in Glasgow. Rate: £65 per hour (Inside IR35) 12 Month - Contract Key Responsibilities (day to day duties) . Ensuring an understanding of project briefs . Experience in the Design and specification of all Mechanical Building Services systems - heating, cooling, hot and cold water systems, ventilation, controls, etc. . Knowledge of Low Pressure/High Pressure Air, Demin Water, Nitrogen, Local Exhaust Ventilation, Diesel Fuel Supply is not essential but useful. . Carry out (and managing of others), in the production of detailed calculations using industry standard software tools including Excel, IES, Hevacomp, in-house developed tools, etc. . Preparing technical specifications using NBS . Collaborate with our BIM team to prepare models and drawings, with a working understanding of Autodesk Revit - note experience of Microstation (& AECOsim) is beneficial . Attendance at meetings with clients and contractors . Site surveys, inspections and monitoring of site works . Report and technical note writing . Maintaining complete records and archives to company standards . Adherence to all quality, environmental and governance processes . Managing elements of project delivery and an understanding of budget costings . Reviewing progress, including reporting any anomalies and changes of scope to the project lead . Contribute to the technical development of junior staff Requirements Essential: . Degree qualified, or equivalent qualification, in Building Services Engineering/Mechanical Engineering or related subjects . Chartered Engineer with CIBSE or IMechE . Familiarity with the principles of building physics such as passive design solutions and fabric first approaches . Competent in designing for measurement and verification, including experience of commissioning and post installation evaluation of performance . Good level of computer literacy in a range of digital tools such as IES thermal modelling package, Navisworks, Hevacomp, One Click, NBS and Microsoft packages Interested or know someone that could be? Please send an up-to-date CV and I will be in touch ASAP to discuss the role in more detail. Please visit the website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy.
24/04/2024
Project-based
I have an fantastic opportunity for a Principal Mechanical Engineer to work on an exciting 7 year framework in Glasgow. Rate: £65 per hour (Inside IR35) 12 Month - Contract Key Responsibilities (day to day duties) . Ensuring an understanding of project briefs . Experience in the Design and specification of all Mechanical Building Services systems - heating, cooling, hot and cold water systems, ventilation, controls, etc. . Knowledge of Low Pressure/High Pressure Air, Demin Water, Nitrogen, Local Exhaust Ventilation, Diesel Fuel Supply is not essential but useful. . Carry out (and managing of others), in the production of detailed calculations using industry standard software tools including Excel, IES, Hevacomp, in-house developed tools, etc. . Preparing technical specifications using NBS . Collaborate with our BIM team to prepare models and drawings, with a working understanding of Autodesk Revit - note experience of Microstation (& AECOsim) is beneficial . Attendance at meetings with clients and contractors . Site surveys, inspections and monitoring of site works . Report and technical note writing . Maintaining complete records and archives to company standards . Adherence to all quality, environmental and governance processes . Managing elements of project delivery and an understanding of budget costings . Reviewing progress, including reporting any anomalies and changes of scope to the project lead . Contribute to the technical development of junior staff Requirements Essential: . Degree qualified, or equivalent qualification, in Building Services Engineering/Mechanical Engineering or related subjects . Chartered Engineer with CIBSE or IMechE . Familiarity with the principles of building physics such as passive design solutions and fabric first approaches . Competent in designing for measurement and verification, including experience of commissioning and post installation evaluation of performance . Good level of computer literacy in a range of digital tools such as IES thermal modelling package, Navisworks, Hevacomp, One Click, NBS and Microsoft packages Interested or know someone that could be? Please send an up-to-date CV and I will be in touch ASAP to discuss the role in more detail. Please visit the website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy.
Mechanical Technician - up to £28 per hour Inside IR35 - 12 Months (extensions highly likely) Herefordshire - standard 37 hours - Fully Onsite Working (Free Parking).Apprenticeship and NVQ needed* One stage F2F interview with skills test - Sector: Aerospace and Defence Are you a skilled production professional seeking a challenging opportunity with a leading company in the manufacturing sector? We are currently looking for dedicated individuals to join the Operations team of Our client who is a renowned Aerospace company at the forefront of space exploration and travel. Daily tasks will include assembly and final assembly processes of aluminium composite panel manufacture. Responsibilities: * Able to insert panels with the correct type of mechanical fasteners. * Potting of inserts * Bonding of various brackets and equipment * Bonding of inserts, using various adhesives * Bonding components and sub-assemblies using adhesives to drawing specifications * Produce work to drawing specification * Ability to read and understand Detailed engineering drawings and procedures. * Awareness and adherence to all the company Health & Safety procedures * High tolerance requirements (typically better than 0.05mm in various areas). Essential: Previous experience in a Manual Handling Role Previous experience within a production/manufacturing environment with regular use of hand tools Ability to follow procedures and work instructions/manuals. Relevant experience in carbon fibre A relevant Apprenticeship or NVQ Desirable: Clean room environment experience Previous experience of laminating Aluminium Ability to read and interpret engineering drawings preferred
23/04/2024
Project-based
Mechanical Technician - up to £28 per hour Inside IR35 - 12 Months (extensions highly likely) Herefordshire - standard 37 hours - Fully Onsite Working (Free Parking).Apprenticeship and NVQ needed* One stage F2F interview with skills test - Sector: Aerospace and Defence Are you a skilled production professional seeking a challenging opportunity with a leading company in the manufacturing sector? We are currently looking for dedicated individuals to join the Operations team of Our client who is a renowned Aerospace company at the forefront of space exploration and travel. Daily tasks will include assembly and final assembly processes of aluminium composite panel manufacture. Responsibilities: * Able to insert panels with the correct type of mechanical fasteners. * Potting of inserts * Bonding of various brackets and equipment * Bonding of inserts, using various adhesives * Bonding components and sub-assemblies using adhesives to drawing specifications * Produce work to drawing specification * Ability to read and understand Detailed engineering drawings and procedures. * Awareness and adherence to all the company Health & Safety procedures * High tolerance requirements (typically better than 0.05mm in various areas). Essential: Previous experience in a Manual Handling Role Previous experience within a production/manufacturing environment with regular use of hand tools Ability to follow procedures and work instructions/manuals. Relevant experience in carbon fibre A relevant Apprenticeship or NVQ Desirable: Clean room environment experience Previous experience of laminating Aluminium Ability to read and interpret engineering drawings preferred
We are recruiting a Systems Engineer to join the Application Engineering Team within the Engineering Department. Reporting to the Application Engineering Manager, the role of Systems Engineer has significant responsibility of developing complex and sophisticated engineering solutions using company products to meet customer needs. The role is responsible for executing all technical aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires an expert understanding of the functionality and use of the company's products and how to adapt them for new applications. Expertise / Technical Competence Technical Analysis : Able to investigate and understand complex technical issues and problems. Ensure issues are managed appropriately. Systems Design : Competent using system analysis tools (UML, Data Flow, FMEA, etc.) to analyse customer needs, system requirements, capability, and cost to determine project feasibility. Able to lead the integration of complex systems and development of system validation plans. Project Management: Experience in managing more than 3 concurrent projects; planning, tracking and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with customers and internal departments to successfully achieve outcomes and results. Health and Safety : Experience of performing system safety assessments and product safety certifications. Technical Documentation: Experience of writing technical documentation from non-technical customer input and writing documentation that allows non-technical people to understand the technical solution we are providing. Candidates should be competent with some of the following: Degree qualification in suitable discipline electronics or equivalent 2:1 or better Electronics Design A good knowledge of product design from feasibility to production, including digital and analogue circuits, microprocessor circuits and PCB design. Firmware Development A good knowledge of C, C++ programming languages and real time operating systems. Mechanical Design A good knowledge of mechanical design for products, including frames and housings, and for product testing equipment. Navigation Concepts and Kinematics Understanding of navigation concepts such as kinematic equations and hardware components used in navigation, such as IMUs and GPS/GNSS. Software Development Have a good knowledge of C++ and C# programming languages, WPF and XAML. Able to lead the development of Software applications and GUI covering the full software life cycle. IoT and SaaS Knowledge of application programming interfaces (APIs) that connect devices to the Internet, along with other key IoT technologies such as Big Data management tools, predictive analytics, AI and machine learning, the cloud, and radio-frequency identification (RFID). Product Compliance An expert knowledge of design for manufacture and product approval processes. Quality Assurance Development and implementation of quality assurance and regulatory compliance procedures for products. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
23/04/2024
Full time
We are recruiting a Systems Engineer to join the Application Engineering Team within the Engineering Department. Reporting to the Application Engineering Manager, the role of Systems Engineer has significant responsibility of developing complex and sophisticated engineering solutions using company products to meet customer needs. The role is responsible for executing all technical aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires an expert understanding of the functionality and use of the company's products and how to adapt them for new applications. Expertise / Technical Competence Technical Analysis : Able to investigate and understand complex technical issues and problems. Ensure issues are managed appropriately. Systems Design : Competent using system analysis tools (UML, Data Flow, FMEA, etc.) to analyse customer needs, system requirements, capability, and cost to determine project feasibility. Able to lead the integration of complex systems and development of system validation plans. Project Management: Experience in managing more than 3 concurrent projects; planning, tracking and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with customers and internal departments to successfully achieve outcomes and results. Health and Safety : Experience of performing system safety assessments and product safety certifications. Technical Documentation: Experience of writing technical documentation from non-technical customer input and writing documentation that allows non-technical people to understand the technical solution we are providing. Candidates should be competent with some of the following: Degree qualification in suitable discipline electronics or equivalent 2:1 or better Electronics Design A good knowledge of product design from feasibility to production, including digital and analogue circuits, microprocessor circuits and PCB design. Firmware Development A good knowledge of C, C++ programming languages and real time operating systems. Mechanical Design A good knowledge of mechanical design for products, including frames and housings, and for product testing equipment. Navigation Concepts and Kinematics Understanding of navigation concepts such as kinematic equations and hardware components used in navigation, such as IMUs and GPS/GNSS. Software Development Have a good knowledge of C++ and C# programming languages, WPF and XAML. Able to lead the development of Software applications and GUI covering the full software life cycle. IoT and SaaS Knowledge of application programming interfaces (APIs) that connect devices to the Internet, along with other key IoT technologies such as Big Data management tools, predictive analytics, AI and machine learning, the cloud, and radio-frequency identification (RFID). Product Compliance An expert knowledge of design for manufacture and product approval processes. Quality Assurance Development and implementation of quality assurance and regulatory compliance procedures for products. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
Position: Mechanical Technician Pay rate: £23.82 p/h inside IR35. location: Stevenage, UK Role Type: 12 Month contract with extension Position: Onsite IO Associates seeks a Panels Surface Treatments Technician for the Stevenage site . Join a global aerospace leader specializing in commercial and military aircraft, helicopters, defense, and space sectors. This role offers a chance to contribute to innovative projects within a dynamic team shaping the future of aviation and space systems. Responsibilities Collaborating within an AIT Operations team to consistently meet quality standards and adhere to production plans. Following LDS guidelines for methods and procedures, while ensuring compliance with standard processes, area requirements, and safety protocols. Upholding Cleanroom Regulations, local safety guidelines, and the 5S policy within the work area. Providing progress updates to Lead Technicians or Team Leads as needed, participating in shop floor meetings, supporting trainees, and contributing to continuous improvement efforts. Skills required Proficient in interpreting detailed drawings and electronic work instructions within prescribed procedures. Skilled in following procedures with defined checkpoints and quality gates. Experienced in various industries such as Space, Aerospace, Automotive, Motorsport, etc. Capable of working at elevated heights. Competent in preparing paint compounds according to manufacturer specifications. This is an excellent opportunity to work for an international company that encourages and facilitates personal growth. Please apply or get in touch with Munish or Email
22/04/2024
Project-based
Position: Mechanical Technician Pay rate: £23.82 p/h inside IR35. location: Stevenage, UK Role Type: 12 Month contract with extension Position: Onsite IO Associates seeks a Panels Surface Treatments Technician for the Stevenage site . Join a global aerospace leader specializing in commercial and military aircraft, helicopters, defense, and space sectors. This role offers a chance to contribute to innovative projects within a dynamic team shaping the future of aviation and space systems. Responsibilities Collaborating within an AIT Operations team to consistently meet quality standards and adhere to production plans. Following LDS guidelines for methods and procedures, while ensuring compliance with standard processes, area requirements, and safety protocols. Upholding Cleanroom Regulations, local safety guidelines, and the 5S policy within the work area. Providing progress updates to Lead Technicians or Team Leads as needed, participating in shop floor meetings, supporting trainees, and contributing to continuous improvement efforts. Skills required Proficient in interpreting detailed drawings and electronic work instructions within prescribed procedures. Skilled in following procedures with defined checkpoints and quality gates. Experienced in various industries such as Space, Aerospace, Automotive, Motorsport, etc. Capable of working at elevated heights. Competent in preparing paint compounds according to manufacturer specifications. This is an excellent opportunity to work for an international company that encourages and facilitates personal growth. Please apply or get in touch with Munish or Email
Request Technology - Craig Johnson
Chicago, Illinois
*We are unable to sponsor for this permanent Full time role* *Position is bonus eligible* Prestigious Global Firm is currently seeking a Senior .NET Product Engineer with Azure experience. Candidate will be responsible for delivering custom business solutions using the Microsoft technology stack. The individual will lead and coordinate projects from a technology perspective, following secure SDLC activities and standards that are consistent with best practices. The individual will drive the design and development of user interfaces, business objectives and overall infrastructure. Responsibilities: Analyze, design, configure, develop and implement intermediate-level solutions to meet business needs and objectives. Work, as directed, with business owners, other IT teams, and vendors to create integrations both to/from vendors. Provide Level 3 support. Investigates operational or systematic problems and provides resolution using intermediate analytical skills and tools as necessary. Prepare project proposals and develop project plans. May lead small projects. Maintain up-to-date awareness of current and future directions of business industry and associated technologies. Investigate and document present procedures as liaison with user departments. May develop and maintain application security, design and documentation according to legal compliance requirements. Effectively listens to understand and articulates technical and non-technical information (both written and oral formats) to customers, peers and/or management in a one-on-one or team context with some oversight. Provides production support activities, including advanced technical writing. Documents small to medium scale projects with some supervision, and may be involved in developing and delivering presentations to aid in custom product development decision making. Manages organizational development by dissecting complex situations and refocusing on the most critical technology tasks. Contributes through technical expertise/professional experience in solving problems and/or delivering on opportunities facing the team or group. Provides feedback to management on strategic recommendations. Fosters environment of innovation and change. Aligns changes with the organization's strategic direction and objectives and customer expectations. Recognizes the scope of problems and understands the impact of changes on others. Identifies short and long-range organizational needs. Creates a clear focus on internal and external customer needs. Qualifications: Bachelor's Degree is preferred in mechanical, computer, or electrical engineering discipline. 8 plus years of software development experience with 6 plus years of web-based software development in .NET technologies (C#, .NET Framework, .NET Core, Docker, MVC, SQL Server). Prior experience developing MSOffice add-Ins in Word, Outlook and Excel Prior experience with ASP.NET MVC (versions 4 and up), .NET Core, WCF, Restful services, JavaScript, jQuery, HTML5/CSS3, React, responsive design, and Dependency Injection frameworks are desired. Experience with ORM with different tools such as Entity Framework and LINQ. Experience working with container-based solutions Experience with continuous integration with Azure DevOps, Git (or similar). Should have strong understanding of SOA, TDD, SOLID principles, and systems architecture concepts. Must be familiar with agile or other iterative development methodologies. Must possess requirement and component level estimation, database design and development skills. Experience in a law firm or global professional services environment preferred. Knowledge of Microsoft Azure technologies. Working with low code platforms like IntApp platform is a plus. Must understand Microsoft Windows Operating system architecture Must understand Microsoft Windows Office System Ability to participate in all aspects of application SDLC including Agile methodologies Must have experience the Microsoft Visual Studio and ADO Must participate in daily team scrums and code reviews Must understand Microsoft SQL Server Technologies: Microsoft Visual Studio 2019/2021 Azure DevOps .NET Framework, .NET Core, Rest API services, WCF Services C#, VB.NET, JQuery, JavaScript, Typescript, React, LINQ, HTML5, CSS3, Bootstrap SQL Server, PostgreSQL Docker MVC Framework Entity Framework Knowledge of SOA (Service Oriented Architecture) and N-Tier Architecture. Advanced Awareness of the Software Development Life Cycle and development methodology (ie Scrum Agile)
22/04/2024
Full time
*We are unable to sponsor for this permanent Full time role* *Position is bonus eligible* Prestigious Global Firm is currently seeking a Senior .NET Product Engineer with Azure experience. Candidate will be responsible for delivering custom business solutions using the Microsoft technology stack. The individual will lead and coordinate projects from a technology perspective, following secure SDLC activities and standards that are consistent with best practices. The individual will drive the design and development of user interfaces, business objectives and overall infrastructure. Responsibilities: Analyze, design, configure, develop and implement intermediate-level solutions to meet business needs and objectives. Work, as directed, with business owners, other IT teams, and vendors to create integrations both to/from vendors. Provide Level 3 support. Investigates operational or systematic problems and provides resolution using intermediate analytical skills and tools as necessary. Prepare project proposals and develop project plans. May lead small projects. Maintain up-to-date awareness of current and future directions of business industry and associated technologies. Investigate and document present procedures as liaison with user departments. May develop and maintain application security, design and documentation according to legal compliance requirements. Effectively listens to understand and articulates technical and non-technical information (both written and oral formats) to customers, peers and/or management in a one-on-one or team context with some oversight. Provides production support activities, including advanced technical writing. Documents small to medium scale projects with some supervision, and may be involved in developing and delivering presentations to aid in custom product development decision making. Manages organizational development by dissecting complex situations and refocusing on the most critical technology tasks. Contributes through technical expertise/professional experience in solving problems and/or delivering on opportunities facing the team or group. Provides feedback to management on strategic recommendations. Fosters environment of innovation and change. Aligns changes with the organization's strategic direction and objectives and customer expectations. Recognizes the scope of problems and understands the impact of changes on others. Identifies short and long-range organizational needs. Creates a clear focus on internal and external customer needs. Qualifications: Bachelor's Degree is preferred in mechanical, computer, or electrical engineering discipline. 8 plus years of software development experience with 6 plus years of web-based software development in .NET technologies (C#, .NET Framework, .NET Core, Docker, MVC, SQL Server). Prior experience developing MSOffice add-Ins in Word, Outlook and Excel Prior experience with ASP.NET MVC (versions 4 and up), .NET Core, WCF, Restful services, JavaScript, jQuery, HTML5/CSS3, React, responsive design, and Dependency Injection frameworks are desired. Experience with ORM with different tools such as Entity Framework and LINQ. Experience working with container-based solutions Experience with continuous integration with Azure DevOps, Git (or similar). Should have strong understanding of SOA, TDD, SOLID principles, and systems architecture concepts. Must be familiar with agile or other iterative development methodologies. Must possess requirement and component level estimation, database design and development skills. Experience in a law firm or global professional services environment preferred. Knowledge of Microsoft Azure technologies. Working with low code platforms like IntApp platform is a plus. Must understand Microsoft Windows Operating system architecture Must understand Microsoft Windows Office System Ability to participate in all aspects of application SDLC including Agile methodologies Must have experience the Microsoft Visual Studio and ADO Must participate in daily team scrums and code reviews Must understand Microsoft SQL Server Technologies: Microsoft Visual Studio 2019/2021 Azure DevOps .NET Framework, .NET Core, Rest API services, WCF Services C#, VB.NET, JQuery, JavaScript, Typescript, React, LINQ, HTML5, CSS3, Bootstrap SQL Server, PostgreSQL Docker MVC Framework Entity Framework Knowledge of SOA (Service Oriented Architecture) and N-Tier Architecture. Advanced Awareness of the Software Development Life Cycle and development methodology (ie Scrum Agile)