An Electrical/Electronic Engineer is required for a contract assignment with a multi-national leading defence company. Missile Architecture - Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support. It's an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: a) Specifying/determining * system electrical requirements * interface definitions and characteristics between subsystems/equipment * power architecture, including power budget and power profiles * data communication and processing architecture * requirements for EMC, bonding, grounding and screening * signal safety, including routing of safety related signals b) Supporting test and fault-finding activities during compatibility checks, risk reduction, system proving/qualification and integration c) Reviewing and authoring reports, guidelines and processes d) Design assessments and analysis e) Working to defence/industry standards f) Attending and supporting design reviews Alternatively, acting as the Equipment Manager (RMO) for specific electrical/electronic equipment(s) that are part of a missile or launcher system you will: a) Project manage the equipment(s) on behalf of the project during development, qualification and manufacture b) Own the requirements on behalf of the project for the equipment(s) c) Produce Statement(s) of Work for the associated design authority for the equipment(s) d) Create and update plans showing activities for the equipment(s) e) Manage internal & external design authorities for delivery of the equipment(s) hardware, software and deliverables to schedule, cost, quality and performance f) Hold regular progress reviews with the design authority for the equipment(s) g) Review qualification verification evidence h) Track and find resolution to equipment non-compliances i) Attend and support design reviews Skillset/experience required: Technical experience required: * electrical/electronics * interface definitions * knowledge of defence/industry standards, etc. * degree level qualification in a related subject * systems engineering * writing reports Ideally this would be within a defence related background, however, experience within other engineering industries will also be considered. Experience within these other areas are also of interest but not essential: * defence * weapon systems * power supplies * actuators * data communication * sensors * EMC * Health Usage Monitoring Systems (HUMS) * Model Based Engineering (MBE) Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
01/05/2024
Project-based
An Electrical/Electronic Engineer is required for a contract assignment with a multi-national leading defence company. Missile Architecture - Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support. It's an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: a) Specifying/determining * system electrical requirements * interface definitions and characteristics between subsystems/equipment * power architecture, including power budget and power profiles * data communication and processing architecture * requirements for EMC, bonding, grounding and screening * signal safety, including routing of safety related signals b) Supporting test and fault-finding activities during compatibility checks, risk reduction, system proving/qualification and integration c) Reviewing and authoring reports, guidelines and processes d) Design assessments and analysis e) Working to defence/industry standards f) Attending and supporting design reviews Alternatively, acting as the Equipment Manager (RMO) for specific electrical/electronic equipment(s) that are part of a missile or launcher system you will: a) Project manage the equipment(s) on behalf of the project during development, qualification and manufacture b) Own the requirements on behalf of the project for the equipment(s) c) Produce Statement(s) of Work for the associated design authority for the equipment(s) d) Create and update plans showing activities for the equipment(s) e) Manage internal & external design authorities for delivery of the equipment(s) hardware, software and deliverables to schedule, cost, quality and performance f) Hold regular progress reviews with the design authority for the equipment(s) g) Review qualification verification evidence h) Track and find resolution to equipment non-compliances i) Attend and support design reviews Skillset/experience required: Technical experience required: * electrical/electronics * interface definitions * knowledge of defence/industry standards, etc. * degree level qualification in a related subject * systems engineering * writing reports Ideally this would be within a defence related background, however, experience within other engineering industries will also be considered. Experience within these other areas are also of interest but not essential: * defence * weapon systems * power supplies * actuators * data communication * sensors * EMC * Health Usage Monitoring Systems (HUMS) * Model Based Engineering (MBE) Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
Role: We are currently looking for an experienced BMS commissioing engineer based in London. you will be coving sites within the M25 corridor. We are looking for someone who has experience with one or more of the following systems (Trend, Tridium, Schneider, Ecostructure, Distech). Responsibilities: Commission, co-ordinate and complete the installation of BMS systems within set timescales, budgetary constraints and in accordance with customers' requirements. Conduct functional testing and verification of BMS components and software. Assist the project team with the development of project documentation and software including DOP's, plant and point schedules, networks design and BMS controller software. Troubleshoot and resolve technical issues during the commissioning process. Collaborate with project managers, engineers, and clients to ensure successful project delivery. Package: Salary £50-55k Car or Car allowance pension contribution
01/05/2024
Full time
Role: We are currently looking for an experienced BMS commissioing engineer based in London. you will be coving sites within the M25 corridor. We are looking for someone who has experience with one or more of the following systems (Trend, Tridium, Schneider, Ecostructure, Distech). Responsibilities: Commission, co-ordinate and complete the installation of BMS systems within set timescales, budgetary constraints and in accordance with customers' requirements. Conduct functional testing and verification of BMS components and software. Assist the project team with the development of project documentation and software including DOP's, plant and point schedules, networks design and BMS controller software. Troubleshoot and resolve technical issues during the commissioning process. Collaborate with project managers, engineers, and clients to ensure successful project delivery. Package: Salary £50-55k Car or Car allowance pension contribution
FGPA Engineer - Design & Verification Hybrid - 2 days onsite per week £500 - £600 per day inside IR35 6 months My client is looking for an experienced FPGA Design & Verification Engineer to join their skilled projects team working on Embedded IP and system design. You'll be responsible for translating FPGA architecture specifications into RTL designs, backed by robust verification environments to uphold fidelity to specifications. Integrating your designs into SoC and reference designs, followed by rigorous system-level testing before deployment to our prototyping teams. Skills required: Recent hands-on experience with RTL design using (System-)Verilog, coupled with a solid grasp of FPGA device architecture. Proficiency in RTL Verification, encompassing both unit and system levels, leveraging SystemVerilog with a knack for crafting System Verilog Assertions (SVA) checks and coverage metrics. Command over UNIX/Linux environments and Scripting languages like Python, Tcl, Make, and bash, essential for thriving in our collaborative development ecosystem. Previous encounters with ASIC or FPGA synthesis tools, along with familiarity with data formats such as YAML and JSON, are definite pluses. A penchant for structured problem-solving coupled with a creative flair.
01/05/2024
Project-based
FGPA Engineer - Design & Verification Hybrid - 2 days onsite per week £500 - £600 per day inside IR35 6 months My client is looking for an experienced FPGA Design & Verification Engineer to join their skilled projects team working on Embedded IP and system design. You'll be responsible for translating FPGA architecture specifications into RTL designs, backed by robust verification environments to uphold fidelity to specifications. Integrating your designs into SoC and reference designs, followed by rigorous system-level testing before deployment to our prototyping teams. Skills required: Recent hands-on experience with RTL design using (System-)Verilog, coupled with a solid grasp of FPGA device architecture. Proficiency in RTL Verification, encompassing both unit and system levels, leveraging SystemVerilog with a knack for crafting System Verilog Assertions (SVA) checks and coverage metrics. Command over UNIX/Linux environments and Scripting languages like Python, Tcl, Make, and bash, essential for thriving in our collaborative development ecosystem. Previous encounters with ASIC or FPGA synthesis tools, along with familiarity with data formats such as YAML and JSON, are definite pluses. A penchant for structured problem-solving coupled with a creative flair.
Senior Spacecraft Systems Engineer Spacecraft Systems Oxfordshire UK, Lynx is working with an innovative space technology company to recruit for a an experienced and motivated Senior Spacecraft Systems Engineer to join the dynamic and rapidly growing team at our state-of-the-art facility in Oxford, UK. Responsibilities: Develop spacecraft mission and system design, including requirements derivation and CONOPS definition Perform mission analysis and modelling of spacecraft missions Manage platform systems budgets (mass, power, data, fuel) Produce mission-level test, verification plans, FMECA, FTA, and FDIR Conduct rapid feasibility studies into different scenarios and architectures Assist with bid work, providing technical solutions and documentation Maintain configuration control of systems work and documentation Guide a multi-disciplined team in project delivery Requirements: Diploma, bachelor's, or master's degree in systems engineering, electrical engineering, or relevant discipline 10+ years of experience in Systems Engineering for satellite platform architecture Knowledge of systems and project engineering life cycle, including leading project review gates Experience in mission and systems architecture definition and CONOPS Good knowledge of subsystems & engineering teams (GNC, astrodynamics, C&DH, EPS, RCS, COM, software, ground segment & operations) Experience developing systems engineering documentation Awareness of the AIT process (manufacture, assembly, functional and environmental testing) Basic knowledge of debris removal, end-of-life, in-orbit maintenance or servicing Offer: Competitive salary up to £85,000 Flexible and hybrid working options 25 days holiday (increasing to 28 days) + 8 bank holidays per year Life insurance, long term sick pay, and private healthcare Relocation allowance and visa sponsorship Regular social events If you are a senior engineer with hands-on experience working on spacecraft systems and can contribute to projects immediately, we'd love to hear from you. Apply today and join in shaping solutions for a sustainable future in space!
30/04/2024
Full time
Senior Spacecraft Systems Engineer Spacecraft Systems Oxfordshire UK, Lynx is working with an innovative space technology company to recruit for a an experienced and motivated Senior Spacecraft Systems Engineer to join the dynamic and rapidly growing team at our state-of-the-art facility in Oxford, UK. Responsibilities: Develop spacecraft mission and system design, including requirements derivation and CONOPS definition Perform mission analysis and modelling of spacecraft missions Manage platform systems budgets (mass, power, data, fuel) Produce mission-level test, verification plans, FMECA, FTA, and FDIR Conduct rapid feasibility studies into different scenarios and architectures Assist with bid work, providing technical solutions and documentation Maintain configuration control of systems work and documentation Guide a multi-disciplined team in project delivery Requirements: Diploma, bachelor's, or master's degree in systems engineering, electrical engineering, or relevant discipline 10+ years of experience in Systems Engineering for satellite platform architecture Knowledge of systems and project engineering life cycle, including leading project review gates Experience in mission and systems architecture definition and CONOPS Good knowledge of subsystems & engineering teams (GNC, astrodynamics, C&DH, EPS, RCS, COM, software, ground segment & operations) Experience developing systems engineering documentation Awareness of the AIT process (manufacture, assembly, functional and environmental testing) Basic knowledge of debris removal, end-of-life, in-orbit maintenance or servicing Offer: Competitive salary up to £85,000 Flexible and hybrid working options 25 days holiday (increasing to 28 days) + 8 bank holidays per year Life insurance, long term sick pay, and private healthcare Relocation allowance and visa sponsorship Regular social events If you are a senior engineer with hands-on experience working on spacecraft systems and can contribute to projects immediately, we'd love to hear from you. Apply today and join in shaping solutions for a sustainable future in space!
Senior Spacecraft Systems Engineer - Security Clearance Eligible - Oxfordshire UK (Hybrid) Lynx is working with a leading space technology company is seeking an experienced and motivated Senior Spacecraft Systems Engineer to join their dynamic and rapidly growing team at their state-of-the-art facility in Oxfordshire UK. Responsibilities: Develop spacecraft mission and system design, including requirements derivation and CONOPS definition Perform mission analysis and modelling of spacecraft missions Trade-off and control platform systems budgets (mass, power, data, fuel) Produce mission-level test and verification plans, FMECA, FTA, and FDIR Perform rapid feasibility studies into different scenarios and architectures Assist with bid work, providing technical solutions and documentation Maintain configuration control of systems work and documentation Work with and guide a multi-disciplined team in the delivery of projects Requirements: Right to Work in UK and Eligible for a Security Clearance application (Mandatory) Diploma, bachelor's, or master's degree in systems engineering, electrical engineering, or another relevant discipline At least 10+ years of commercial experience in a Systems Engineering role for satellite platform architecture Knowledge of the systems and project engineering life cycle from requirements definition through to verification Experience in mission and systems architecture definition and CONOPS Good knowledge of various subsystems & engineering teams Experience in the development of systems engineering documentation Awareness of the AIT process: manufacture, assembly, functional and environmental testing Basic knowledge in areas such as debris removal, end-of-life, in-orbit maintenance or servicing Offer: Competitive base salary up to £85,000 Hybrid working available (Dependent on individual role requirements) Opportunity to work with a highly talented international team on cutting-edge technology Flexible working around core hours 25 days holiday (increasing yearly up to a maximum of 28 days) + 8 days Bank Holiday per year Life insurance and long-term sick pay Private healthcare (taxable benefit) Relocation allowance (within the UK) Regular social events If you are a senior engineer with hands-on experience working on spacecraft systems and can contribute to projects straight away, this is an excellent opportunity to join a pioneering company in the space industry. Apply now to shape the future of space sustainability!
30/04/2024
Full time
Senior Spacecraft Systems Engineer - Security Clearance Eligible - Oxfordshire UK (Hybrid) Lynx is working with a leading space technology company is seeking an experienced and motivated Senior Spacecraft Systems Engineer to join their dynamic and rapidly growing team at their state-of-the-art facility in Oxfordshire UK. Responsibilities: Develop spacecraft mission and system design, including requirements derivation and CONOPS definition Perform mission analysis and modelling of spacecraft missions Trade-off and control platform systems budgets (mass, power, data, fuel) Produce mission-level test and verification plans, FMECA, FTA, and FDIR Perform rapid feasibility studies into different scenarios and architectures Assist with bid work, providing technical solutions and documentation Maintain configuration control of systems work and documentation Work with and guide a multi-disciplined team in the delivery of projects Requirements: Right to Work in UK and Eligible for a Security Clearance application (Mandatory) Diploma, bachelor's, or master's degree in systems engineering, electrical engineering, or another relevant discipline At least 10+ years of commercial experience in a Systems Engineering role for satellite platform architecture Knowledge of the systems and project engineering life cycle from requirements definition through to verification Experience in mission and systems architecture definition and CONOPS Good knowledge of various subsystems & engineering teams Experience in the development of systems engineering documentation Awareness of the AIT process: manufacture, assembly, functional and environmental testing Basic knowledge in areas such as debris removal, end-of-life, in-orbit maintenance or servicing Offer: Competitive base salary up to £85,000 Hybrid working available (Dependent on individual role requirements) Opportunity to work with a highly talented international team on cutting-edge technology Flexible working around core hours 25 days holiday (increasing yearly up to a maximum of 28 days) + 8 days Bank Holiday per year Life insurance and long-term sick pay Private healthcare (taxable benefit) Relocation allowance (within the UK) Regular social events If you are a senior engineer with hands-on experience working on spacecraft systems and can contribute to projects straight away, this is an excellent opportunity to join a pioneering company in the space industry. Apply now to shape the future of space sustainability!
Senior Hardware Design Engineer - Exciting Opportunity with Leading Tech Company Lynx is working with a renowned tech company to recruit a Senior Hardware Design Engineer. In this role you'll play a pivotal role in new product introduction as well as sustaining engineering for ground-breaking products. This is a hybrid role and also offers a bonus of 3-6%. Key Responsibilities: Design electronic circuits, subsystems, and systems covering analog, digital, and RF Schematic capture, layout, and library management Evaluate new systems and technologies for feasibility and product design Technical support for production, manufacturing, and troubleshooting Design verification, testing, and documentation Requirements: 4+ years of relevant hardware design experience Strong expertise in digital circuit design (microprocessors, FPGAs, high-speed peripherals) Solid skills in analog circuit design (power supplies, etc.) Familiarity with PCB layout, EMC/CE marking, and design for IPC Hands-on experience in PCB testing Desired: Proficiency with industry-standard design tools - Altium preferred Understanding of military/airborne design standards (MIL-STD, DO-160, etc.) Practical testing skills with scopes, analysers, JTAG boundary scan, etc. Hit apply to find out more information.
30/04/2024
Full time
Senior Hardware Design Engineer - Exciting Opportunity with Leading Tech Company Lynx is working with a renowned tech company to recruit a Senior Hardware Design Engineer. In this role you'll play a pivotal role in new product introduction as well as sustaining engineering for ground-breaking products. This is a hybrid role and also offers a bonus of 3-6%. Key Responsibilities: Design electronic circuits, subsystems, and systems covering analog, digital, and RF Schematic capture, layout, and library management Evaluate new systems and technologies for feasibility and product design Technical support for production, manufacturing, and troubleshooting Design verification, testing, and documentation Requirements: 4+ years of relevant hardware design experience Strong expertise in digital circuit design (microprocessors, FPGAs, high-speed peripherals) Solid skills in analog circuit design (power supplies, etc.) Familiarity with PCB layout, EMC/CE marking, and design for IPC Hands-on experience in PCB testing Desired: Proficiency with industry-standard design tools - Altium preferred Understanding of military/airborne design standards (MIL-STD, DO-160, etc.) Practical testing skills with scopes, analysers, JTAG boundary scan, etc. Hit apply to find out more information.
A leading Defence client of ours is currently looking for a Principal Systems Engineer within their Defence team to work on a variety of safety/mission critical projects. The right candidate will be responsible for understanding the customers complex needs and developing, validating & managing Systems requirements at all levels. What you'll be doing: * Developing complex system architectures and sub-systems using a Model Based Systems Engineering approach * Integration, analysis and test of Real Time systems containing multiple technical disciplines such as electronic, mechanical, optical and software sub-systems. * Taking accountability for collaborative technical work package execution and associated outcomes * Providing guidance, coaching and nurturing talent in other engineers * Verifying that customer needs are satisfied * Steering new and improved systems development through implementation whilst making use of best practice systems life cycle processes alongside techniques such as Learn First and Agile Your skills and experiences: Essential: * Proven experience developing systems in relevant product markets and/or domains, such as control systems, Real Time displays or other safety related systems * Proven experience in requirements management, design analyses, modelling and simulation, using tools such as DOORS, Siemens Polarion, Enterprise Architect, MATLAB and/or Simulink and design methodologies such as SysML * A degree or equivalent qualification in a relevant Scientific/Engineering subject (eg Systems Engineering, Electronic Engineering, Physics or Mathematics) Desirable: * Experience in integration, test, and/or verification of Real Time and/or safety related systems * Understanding of safety assessment processes including how these processes influence the design * Customer and/or supplier liaison experience for technical aspects, verifying and obtaining agreement that customer needs are satisfied * An understanding of information assurance, cyber security and environmental impact aspects relating to Real Time Embedded engineering products Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
30/04/2024
Full time
A leading Defence client of ours is currently looking for a Principal Systems Engineer within their Defence team to work on a variety of safety/mission critical projects. The right candidate will be responsible for understanding the customers complex needs and developing, validating & managing Systems requirements at all levels. What you'll be doing: * Developing complex system architectures and sub-systems using a Model Based Systems Engineering approach * Integration, analysis and test of Real Time systems containing multiple technical disciplines such as electronic, mechanical, optical and software sub-systems. * Taking accountability for collaborative technical work package execution and associated outcomes * Providing guidance, coaching and nurturing talent in other engineers * Verifying that customer needs are satisfied * Steering new and improved systems development through implementation whilst making use of best practice systems life cycle processes alongside techniques such as Learn First and Agile Your skills and experiences: Essential: * Proven experience developing systems in relevant product markets and/or domains, such as control systems, Real Time displays or other safety related systems * Proven experience in requirements management, design analyses, modelling and simulation, using tools such as DOORS, Siemens Polarion, Enterprise Architect, MATLAB and/or Simulink and design methodologies such as SysML * A degree or equivalent qualification in a relevant Scientific/Engineering subject (eg Systems Engineering, Electronic Engineering, Physics or Mathematics) Desirable: * Experience in integration, test, and/or verification of Real Time and/or safety related systems * Understanding of safety assessment processes including how these processes influence the design * Customer and/or supplier liaison experience for technical aspects, verifying and obtaining agreement that customer needs are satisfied * An understanding of information assurance, cyber security and environmental impact aspects relating to Real Time Embedded engineering products Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Engineer (Process Supporter) - Process management/ GMP /diagnostic/Database/German Project: For our customer Roche Diagnostics International AG based in Rotkreuz we are looking for a highly qualified Engineer (Process Supporter) Background: The Department Process Support CH is looking for an Engineer (Process Supporter) with a good understanding of development processes. The Engineer (Process Supporter) is responsible for process guidance, process optimization and documentation of various development projects. The perfect candidate has a university degree in Life Sciences, Natural Sciences or Engineering as well as first experience and good technical understanding of product development processes within a highly regulated environment (working experience or internship). Database experience and experience in Process Management is of advantage. Experience in the Diagnostics industry and experience within the GMP regulated environment is a plus. Tasks & Responsibilities: . Responsible for process guidance, process optimization and documentation of various development projects (system and assay) regarding Requirements - and Risk-Management, Configuration Management, Verification and Validation Management, and/or Usability Engineering . Support translation of multi-level requirements via Requirements Management process . Conduct detailed risk assessments by analysing documents, statistics, reports and market trends and with a team of cross functional representatives . Ensure all risks and requirements are maintained within a database and streamline approach across projects . Ensure the delivery of timely and good quality risk and requirements documentation . Establish and perform Configuration Management in complex development projects . Support development projects as Verification Manager (Planning, Guiding, Training, Reporting) . Managing project related interactions with Development, Global Platform Support, Design Quality Assurance, Regulatory, Medical Affairs, external suppliers and other internal departments. . Information gathering from respective stakeholders including consolidation of information . Independent execution of work packages within area of responsibility . Organize and manage their own time within scope of assigned work packages . Ensure the delivery of timely and good quality documentation Must Haves: . University degree in Life Sciences, Natural Sciences or Engineering . First experience and good technical understanding of product development processes within a highly regulated environment . Database experience preferred . Experience in Process Management (Risk, Requirements, Configuration, Defect and/or Verification Management) is a plus . Experience in the Diagnostics industry and experience within the GMP regulated environment is a plus . Good analytical thinking, a structured, reliable working manner, ability to prioritize, plan and manage multiple tasks and to instill a sense of urgency in teams . Ability to lead by influence, demonstrated effectiveness, drive decisions and account for results; ability to resolve conflicts and adapt to change, effective to drive results and achieve project goals . Excellent verbal and written communication skills in English, and preferably German in addition . Excellent communication and presentation skills . Open minded team-player Reference Nr.: 923407TP Role: Engineer (Process Supporter) Industrie: Pharma Workplace: Rotkreuz Pensum: 80 - 100% Start: 01.06.2024 Duration: 12 Deadline : 06.05.2024 If you are interested in this position, please send us your complete dossier via the link in this advertisement. About us : ITech Consult is an ISO 9001:2015 certified Swiss company with offices in Germany and Ireland. ITech Consult specialises in the placement of highly qualified candidates for recruitment in the fields of IT, Life Science & Engineering. We offer staff leasing & payroll services. For our candidates this is free of charge, also for Payroll we do not charge you any additional fees.
30/04/2024
Project-based
Engineer (Process Supporter) - Process management/ GMP /diagnostic/Database/German Project: For our customer Roche Diagnostics International AG based in Rotkreuz we are looking for a highly qualified Engineer (Process Supporter) Background: The Department Process Support CH is looking for an Engineer (Process Supporter) with a good understanding of development processes. The Engineer (Process Supporter) is responsible for process guidance, process optimization and documentation of various development projects. The perfect candidate has a university degree in Life Sciences, Natural Sciences or Engineering as well as first experience and good technical understanding of product development processes within a highly regulated environment (working experience or internship). Database experience and experience in Process Management is of advantage. Experience in the Diagnostics industry and experience within the GMP regulated environment is a plus. Tasks & Responsibilities: . Responsible for process guidance, process optimization and documentation of various development projects (system and assay) regarding Requirements - and Risk-Management, Configuration Management, Verification and Validation Management, and/or Usability Engineering . Support translation of multi-level requirements via Requirements Management process . Conduct detailed risk assessments by analysing documents, statistics, reports and market trends and with a team of cross functional representatives . Ensure all risks and requirements are maintained within a database and streamline approach across projects . Ensure the delivery of timely and good quality risk and requirements documentation . Establish and perform Configuration Management in complex development projects . Support development projects as Verification Manager (Planning, Guiding, Training, Reporting) . Managing project related interactions with Development, Global Platform Support, Design Quality Assurance, Regulatory, Medical Affairs, external suppliers and other internal departments. . Information gathering from respective stakeholders including consolidation of information . Independent execution of work packages within area of responsibility . Organize and manage their own time within scope of assigned work packages . Ensure the delivery of timely and good quality documentation Must Haves: . University degree in Life Sciences, Natural Sciences or Engineering . First experience and good technical understanding of product development processes within a highly regulated environment . Database experience preferred . Experience in Process Management (Risk, Requirements, Configuration, Defect and/or Verification Management) is a plus . Experience in the Diagnostics industry and experience within the GMP regulated environment is a plus . Good analytical thinking, a structured, reliable working manner, ability to prioritize, plan and manage multiple tasks and to instill a sense of urgency in teams . Ability to lead by influence, demonstrated effectiveness, drive decisions and account for results; ability to resolve conflicts and adapt to change, effective to drive results and achieve project goals . Excellent verbal and written communication skills in English, and preferably German in addition . Excellent communication and presentation skills . Open minded team-player Reference Nr.: 923407TP Role: Engineer (Process Supporter) Industrie: Pharma Workplace: Rotkreuz Pensum: 80 - 100% Start: 01.06.2024 Duration: 12 Deadline : 06.05.2024 If you are interested in this position, please send us your complete dossier via the link in this advertisement. About us : ITech Consult is an ISO 9001:2015 certified Swiss company with offices in Germany and Ireland. ITech Consult specialises in the placement of highly qualified candidates for recruitment in the fields of IT, Life Science & Engineering. We offer staff leasing & payroll services. For our candidates this is free of charge, also for Payroll we do not charge you any additional fees.
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
29/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
Annual Salary: £50,000-£55,000 GBP per annum and Benefits applicable by the Client We are seeking a skilled Embedded Software Engineer to join our team. As an Embedded Software Engineer, you will play a crucial role in designing software applications for Embedded microprocessors, controlling components, functions, and user interfaces in hardware designs. Additionally, you will collaborate closely with our hardware engineers and wider design team to enhance hardware functionality through innovative software solutions. Key Responsibilities: Design software applications for Embedded microprocessors to control components, functions, and user interfaces in hardware designs, particularly ARM/Cortex cores. Develop software applications for Embedded Linux systems on SoM modules. Collaborate with system architects and the wider design team to design features for HID/GUIs (Human Interface Devices/Graphical User Interfaces). Work closely with hardware engineers to understand functions and optimize hardware utilization, suggesting and implementing additional functions, improvements, and bug fixes. Manage releases and builds in a structured manner to track changes and variants effectively. Improve and document test procedures and processes for product verification and testing. Play a vital role in the New Product Development (NPD) and New Product Introduction (NPI) process, supporting new product designs to completion and beyond. Assist in building test environments for prototype testing, code testing, and production testing. Experience and Qualifications: Required: Minimum 3 years of experience in Embedded software design for microprocessors, using compiled C, FreeRTOS, or similar, particularly for ARM Microprocessor cores. Degree in electronics engineering or equivalent education/training/experience. Understanding of serial communication interfaces and architecture. Experience testing and debugging code/software on hardware platforms. Experience in digital hardware design, testing, and fault-finding, including microprocessors, serial buses, firmware programming, and JTAG chains. Experience in digital RF applications such as FPGA, ADC, DAC. Proficiency in computer systems and platforms, including Linux and Windows. Preferred, but not essential: Experience in application design for PC environments (Windows and Linux) using .NET. Experience in application design for Android systems. Proficiency in C#, C++, Python, and Java. Understanding of serial bus architectures and data transfer packaging, including IP/COM/USB. Understanding of power management for battery-operated devices. Understanding of FPGA code development. The Ideal Candidate: Well-organised with a structured approach to recording and analysing results. Analytical approach and creative mindset to enhance applications and solve issues efficiently. Excellent communication skills and a service-minded approach to collaboration. Ability to work under pressure and deliver results within tight project deadlines. If you are a motivated individual with a passion for technology and a strong background in Embedded software engineering, we encourage you to apply for this exciting opportunity to join our team and contribute to our continued success in delivering innovative electronic solutions.
29/04/2024
Full time
Annual Salary: £50,000-£55,000 GBP per annum and Benefits applicable by the Client We are seeking a skilled Embedded Software Engineer to join our team. As an Embedded Software Engineer, you will play a crucial role in designing software applications for Embedded microprocessors, controlling components, functions, and user interfaces in hardware designs. Additionally, you will collaborate closely with our hardware engineers and wider design team to enhance hardware functionality through innovative software solutions. Key Responsibilities: Design software applications for Embedded microprocessors to control components, functions, and user interfaces in hardware designs, particularly ARM/Cortex cores. Develop software applications for Embedded Linux systems on SoM modules. Collaborate with system architects and the wider design team to design features for HID/GUIs (Human Interface Devices/Graphical User Interfaces). Work closely with hardware engineers to understand functions and optimize hardware utilization, suggesting and implementing additional functions, improvements, and bug fixes. Manage releases and builds in a structured manner to track changes and variants effectively. Improve and document test procedures and processes for product verification and testing. Play a vital role in the New Product Development (NPD) and New Product Introduction (NPI) process, supporting new product designs to completion and beyond. Assist in building test environments for prototype testing, code testing, and production testing. Experience and Qualifications: Required: Minimum 3 years of experience in Embedded software design for microprocessors, using compiled C, FreeRTOS, or similar, particularly for ARM Microprocessor cores. Degree in electronics engineering or equivalent education/training/experience. Understanding of serial communication interfaces and architecture. Experience testing and debugging code/software on hardware platforms. Experience in digital hardware design, testing, and fault-finding, including microprocessors, serial buses, firmware programming, and JTAG chains. Experience in digital RF applications such as FPGA, ADC, DAC. Proficiency in computer systems and platforms, including Linux and Windows. Preferred, but not essential: Experience in application design for PC environments (Windows and Linux) using .NET. Experience in application design for Android systems. Proficiency in C#, C++, Python, and Java. Understanding of serial bus architectures and data transfer packaging, including IP/COM/USB. Understanding of power management for battery-operated devices. Understanding of FPGA code development. The Ideal Candidate: Well-organised with a structured approach to recording and analysing results. Analytical approach and creative mindset to enhance applications and solve issues efficiently. Excellent communication skills and a service-minded approach to collaboration. Ability to work under pressure and deliver results within tight project deadlines. If you are a motivated individual with a passion for technology and a strong background in Embedded software engineering, we encourage you to apply for this exciting opportunity to join our team and contribute to our continued success in delivering innovative electronic solutions.
Overview Our client is a leader in their field, headquartered in Cambridgeshire, with over 3000 + employees worldwide. They provide cutting-edge technologies and systems to companies globally. They are currently on the hunt for a Senior Electronics Design Engineer to join the team. The ideal individual will be creative and technically gifted, being able to create technical solutions for design requirements. Key Responsibilities for the Senior Electronics Design Engineer: Creation of technical concepts and solutions to solve and meet internal design requirements. Design of Electronics, Firmware and Software to support the development of new Technologies. Root cause analysis and resolution of complex multi-domain issues of prototype systems. Documentation of designs and test results for hand over to new product development. Key Skills for the Senior Electronics Design Engineer: Significant Electronic Design experience in analogue electronic design/digital electronic design. Design verification and functional test software development, experience in C++, Arduino, Raspberry Pi and simple GUI. Able to adequately express technical matters orally and in writing. Teamwork within multi-functional.
29/04/2024
Full time
Overview Our client is a leader in their field, headquartered in Cambridgeshire, with over 3000 + employees worldwide. They provide cutting-edge technologies and systems to companies globally. They are currently on the hunt for a Senior Electronics Design Engineer to join the team. The ideal individual will be creative and technically gifted, being able to create technical solutions for design requirements. Key Responsibilities for the Senior Electronics Design Engineer: Creation of technical concepts and solutions to solve and meet internal design requirements. Design of Electronics, Firmware and Software to support the development of new Technologies. Root cause analysis and resolution of complex multi-domain issues of prototype systems. Documentation of designs and test results for hand over to new product development. Key Skills for the Senior Electronics Design Engineer: Significant Electronic Design experience in analogue electronic design/digital electronic design. Design verification and functional test software development, experience in C++, Arduino, Raspberry Pi and simple GUI. Able to adequately express technical matters orally and in writing. Teamwork within multi-functional.
We are currently looking on behalf of one of our important clients for a Head of Laboratory Test Development & Validation (German Speaking). The role is a permanent position based in Bern Canton & comes with good home office allowance. Your Role: Oversee the personnel & technical management of a specialist group of 4 Engineers & 3 Laboratory Technicians. Develop & validate new physical measurement & testing methods. Provide technical support for Design Verification Laboratories. Hold responsibility for the operation & maintenance of a Development Laboratory. Plan, coordinate & execute measurement & testing orders in relation to Product Innovation & Product Development. Place, award & support contracts to external service providers if required. Your Skills: At least 5 years of relevant professional experience including experience within Development Laboratories. Skilled & experienced in Leading teams. Ideally experienced in Design Verification & the Medical Technology sector. Your Profile: Completed relevant Scientific or Technical University Degree. Communicative, strong leadership skills & solution-oriented. Fluent English & good German language skills (to at least B2 Level) are a mandatory requirement.
29/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Head of Laboratory Test Development & Validation (German Speaking). The role is a permanent position based in Bern Canton & comes with good home office allowance. Your Role: Oversee the personnel & technical management of a specialist group of 4 Engineers & 3 Laboratory Technicians. Develop & validate new physical measurement & testing methods. Provide technical support for Design Verification Laboratories. Hold responsibility for the operation & maintenance of a Development Laboratory. Plan, coordinate & execute measurement & testing orders in relation to Product Innovation & Product Development. Place, award & support contracts to external service providers if required. Your Skills: At least 5 years of relevant professional experience including experience within Development Laboratories. Skilled & experienced in Leading teams. Ideally experienced in Design Verification & the Medical Technology sector. Your Profile: Completed relevant Scientific or Technical University Degree. Communicative, strong leadership skills & solution-oriented. Fluent English & good German language skills (to at least B2 Level) are a mandatory requirement.
Position Available : Requirements Engineer Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £55,000 + Company Bonus & Very Good Pension Package Experience needed : Experience of requirements management and technical report writing within a complex, high-technology manufacturing or engineering industry such as defence, aerospace, automotive, maritime, nuclear and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have several vacancies available as Requirements Engineers to join our team who are responsible for the definition of the seeker system design and the subsystems. As a team we are responsible for supporting our various programmes, working with our customers and suppliers towards developing and integrating the next generation RF seekers. There are numerous progression and development opportunities available, as well as interaction with stakeholders across dynamic engineering teams. What we need from you: Knowledge of requirements management toolsets eg DOORS The ability to define and conduct systems studies in order to inform requirements Good data analysis and technical report writing skills Good communication skills and the ability to work in a cross-functional team It would be great to have experience in some/any of the following: Knowledge of MBSE, Software or firmware knowledge Knowledge of RF systems and Digital Signal Processing Knowledge of performance Model Development processes Experience in, or appreciation of, task package management Experience in product verification and validation Experience across the full product life cycle Hardware experience or an interest in Hardware If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
26/04/2024
Full time
Position Available : Requirements Engineer Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £55,000 + Company Bonus & Very Good Pension Package Experience needed : Experience of requirements management and technical report writing within a complex, high-technology manufacturing or engineering industry such as defence, aerospace, automotive, maritime, nuclear and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have several vacancies available as Requirements Engineers to join our team who are responsible for the definition of the seeker system design and the subsystems. As a team we are responsible for supporting our various programmes, working with our customers and suppliers towards developing and integrating the next generation RF seekers. There are numerous progression and development opportunities available, as well as interaction with stakeholders across dynamic engineering teams. What we need from you: Knowledge of requirements management toolsets eg DOORS The ability to define and conduct systems studies in order to inform requirements Good data analysis and technical report writing skills Good communication skills and the ability to work in a cross-functional team It would be great to have experience in some/any of the following: Knowledge of MBSE, Software or firmware knowledge Knowledge of RF systems and Digital Signal Processing Knowledge of performance Model Development processes Experience in, or appreciation of, task package management Experience in product verification and validation Experience across the full product life cycle Hardware experience or an interest in Hardware If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Requirements Engineer Location : Gloucestershire (Hybrid) & Dynamic Working Hours Salary : Up to £55,000 + Company Bonus & Very Good Pension Package Experience needed : Experience of requirements management and technical report writing within a complex, high-technology manufacturing or engineering industry such as defence, aerospace, automotive, maritime, nuclear and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have several vacancies available as Requirements Engineers to join our team who are responsible for the definition of the seeker system design and the subsystems. As a team we are responsible for supporting our various programmes, working with our customers and suppliers towards developing and integrating the next generation RF seekers. There are numerous progression and development opportunities available, as well as interaction with stakeholders across dynamic engineering teams. What we need from you: Knowledge of requirements management toolsets eg DOORS The ability to define and conduct systems studies in order to inform requirements Good data analysis and technical report writing skills Good communication skills and the ability to work in a cross-functional team It would be great to have experience in some/any of the following: Knowledge of MBSE, Software or firmware knowledge Knowledge of RF systems and Digital Signal Processing Knowledge of performance Model Development processes Experience in, or appreciation of, task package management Experience in product verification and validation Experience across the full product life cycle Hardware experience or an interest in Hardware If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
26/04/2024
Full time
Position Available : Requirements Engineer Location : Gloucestershire (Hybrid) & Dynamic Working Hours Salary : Up to £55,000 + Company Bonus & Very Good Pension Package Experience needed : Experience of requirements management and technical report writing within a complex, high-technology manufacturing or engineering industry such as defence, aerospace, automotive, maritime, nuclear and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have several vacancies available as Requirements Engineers to join our team who are responsible for the definition of the seeker system design and the subsystems. As a team we are responsible for supporting our various programmes, working with our customers and suppliers towards developing and integrating the next generation RF seekers. There are numerous progression and development opportunities available, as well as interaction with stakeholders across dynamic engineering teams. What we need from you: Knowledge of requirements management toolsets eg DOORS The ability to define and conduct systems studies in order to inform requirements Good data analysis and technical report writing skills Good communication skills and the ability to work in a cross-functional team It would be great to have experience in some/any of the following: Knowledge of MBSE, Software or firmware knowledge Knowledge of RF systems and Digital Signal Processing Knowledge of performance Model Development processes Experience in, or appreciation of, task package management Experience in product verification and validation Experience across the full product life cycle Hardware experience or an interest in Hardware If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
I have an fantastic opportunity for a Principal Mechanical Engineer to work on an exciting 7 year framework in Glasgow. Rate: £75 per hour (Inside IR35) Contract: 12 months The role must be fully aware of and adhere to Health & Safety standards and be fully familiar with all authorised documentation, Good Practice Guides and ISO standards. 1. Ensure effective management of multi discipline teams to ensure timely & efficient delivery of engineering work to meet customer agreed scope 2. Supervise engineers/technical specialists 3. Promote effective co-operation across Engineering and other functional teams 4. Ensure effective management of the customer, including liaison and relationship development with existing and new customers, to aid the development of business, resolution of technical and delivery issues, and such that the customer is fully briefed and informed of progress 5. Ensure technical management of the engineering output to ensure delivery of technical solutions in line with agreed technical scope 6. Produce, review, verify and approve outputs including: calculations, analyses, technical reports, technical specifications and method statements 7. Ensure that adequate review, verification and approval is undertaken on all their deliverables and for those under their direct control and supervision 8. Ensure that procedures, codes and standards are correctly identified and applied to engineering and technical activities 9. Ensure application of highest standards for health and safety in immediate area of responsibility and ensure all team members across engineering co-operate with respect to company standards about matters on health, safety and environment, ethics and behaviours 10. Manage resource demands and development of capability skills to match needs of assigned work scopes 11. Ensure project and technical audits and review are planned & executed in order to impart learning and experience as appropriate and in line with agreed standards 12. Maintain knowledge of Industry best practice, promote a culture of engineering best practice, provide leadership and assist in driving cultural development and change 13. Contribute to learning from experience (LfE). requirement, during and post project 14. Support business development opportunities. 15. Exercise care for own health and safety and that of others as defined by Health and Safety legislation, adhere to endorsed Company policy, procedures and delegations (eg Health & Safety, Diversity & Inclusion, Performance & Development Reviews and Finance etc.) Ensure application of highest standards for health and safety in immediate area of responsibility and ensure all team members across engineering co-operate with respect to company standards about matters on health, safety and environment, ethics and behaviours 16. Support the business winning process through input into or review of tender requirements, including estimates 17. Leading Self: Is a role model, demonstrating Cavendish principles, promoting health, safety and well being, respect and inclusion 18. Leading Others: Owns the performance and development of their team members, including effective and ongoing communication and feedback 19. Leading Resources: Responsible for effective planning and organisation of resources to deliver on customer promises Essential: Engineering degree (or equivalent qualification) in relevant engineering discipline, with significant demonstrable experience Chartered Engineer status Demonstrable experience in managing teams to deliver analysis activities on a range of project types Demonstrable experience in covering a variety of tasks across a range of complexities Excellent communications skills and the ability to interface with other disciplines Desirable: Member of relevant institute or significant demonstrable engineering experience and capable of registration with the Engineering Council Experience in managing engineering scope for Projects from concept design to full Engineering, Procurement and Construction (EPC) Breadth and depth of experience in a range of commercial or defence project Interested or know someone that could be Please send an up-to-date CV and I will be in touch ASAP to discuss the role in more detail. Please visit the website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy.
25/04/2024
Project-based
I have an fantastic opportunity for a Principal Mechanical Engineer to work on an exciting 7 year framework in Glasgow. Rate: £75 per hour (Inside IR35) Contract: 12 months The role must be fully aware of and adhere to Health & Safety standards and be fully familiar with all authorised documentation, Good Practice Guides and ISO standards. 1. Ensure effective management of multi discipline teams to ensure timely & efficient delivery of engineering work to meet customer agreed scope 2. Supervise engineers/technical specialists 3. Promote effective co-operation across Engineering and other functional teams 4. Ensure effective management of the customer, including liaison and relationship development with existing and new customers, to aid the development of business, resolution of technical and delivery issues, and such that the customer is fully briefed and informed of progress 5. Ensure technical management of the engineering output to ensure delivery of technical solutions in line with agreed technical scope 6. Produce, review, verify and approve outputs including: calculations, analyses, technical reports, technical specifications and method statements 7. Ensure that adequate review, verification and approval is undertaken on all their deliverables and for those under their direct control and supervision 8. Ensure that procedures, codes and standards are correctly identified and applied to engineering and technical activities 9. Ensure application of highest standards for health and safety in immediate area of responsibility and ensure all team members across engineering co-operate with respect to company standards about matters on health, safety and environment, ethics and behaviours 10. Manage resource demands and development of capability skills to match needs of assigned work scopes 11. Ensure project and technical audits and review are planned & executed in order to impart learning and experience as appropriate and in line with agreed standards 12. Maintain knowledge of Industry best practice, promote a culture of engineering best practice, provide leadership and assist in driving cultural development and change 13. Contribute to learning from experience (LfE). requirement, during and post project 14. Support business development opportunities. 15. Exercise care for own health and safety and that of others as defined by Health and Safety legislation, adhere to endorsed Company policy, procedures and delegations (eg Health & Safety, Diversity & Inclusion, Performance & Development Reviews and Finance etc.) Ensure application of highest standards for health and safety in immediate area of responsibility and ensure all team members across engineering co-operate with respect to company standards about matters on health, safety and environment, ethics and behaviours 16. Support the business winning process through input into or review of tender requirements, including estimates 17. Leading Self: Is a role model, demonstrating Cavendish principles, promoting health, safety and well being, respect and inclusion 18. Leading Others: Owns the performance and development of their team members, including effective and ongoing communication and feedback 19. Leading Resources: Responsible for effective planning and organisation of resources to deliver on customer promises Essential: Engineering degree (or equivalent qualification) in relevant engineering discipline, with significant demonstrable experience Chartered Engineer status Demonstrable experience in managing teams to deliver analysis activities on a range of project types Demonstrable experience in covering a variety of tasks across a range of complexities Excellent communications skills and the ability to interface with other disciplines Desirable: Member of relevant institute or significant demonstrable engineering experience and capable of registration with the Engineering Council Experience in managing engineering scope for Projects from concept design to full Engineering, Procurement and Construction (EPC) Breadth and depth of experience in a range of commercial or defence project Interested or know someone that could be Please send an up-to-date CV and I will be in touch ASAP to discuss the role in more detail. Please visit the website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy.
Stress Engineer Stress; FEA; Structures; Materials Science; Mechanical Engineering £35,000 - £55,000 + excellent Benefits. Kidderminster (Hybrid available) A cutting-edge Aerospace & Defence organisation have a unique opportunity for a Stress Engineer to join their Design team. The design department designs new and modified rocket motors and related systems. Analysis of rocket motor designs, including: Ballistic performance prediction and modelling, propellant charge and hardware stress analysis, and the provision of documentation service. ESSENTIAL DUTIES & REPONSIBILITIES - Stress Engineer Technical Responsibilities Analysis of new and existing rocket motor systems such as motor hardware and propellant charge structural and thermal analysis using FEA software. The use of various software and programming techniques, including: Abaqus, Altair-Hyperworks, Fortran and Matlab. Rheological analysis of material testing results and providing advice to the technical community for validation and verification of FEA models. Development of motor structural test plans and involvement in the delivery and assessment of the structural testing results. Responsible as the structural performance technical authority aspects of assigned projects, including supporting project customer meetings, project investigations, design reviews, and corresponding customer stress engineers. Deliver key project documentation including, structural analysis and structural test plans and reports and structural design records. EXPERIENCE & BACKGROUND - Stress Engineer Educated to degree level in an engineering discipline such as Mechanical, Aerospace or Structural or another related discipline such as Material Science. Material science knowledge Use of ABAQUS software in an professional or academic environment Experience with CAD modelling
25/04/2024
Full time
Stress Engineer Stress; FEA; Structures; Materials Science; Mechanical Engineering £35,000 - £55,000 + excellent Benefits. Kidderminster (Hybrid available) A cutting-edge Aerospace & Defence organisation have a unique opportunity for a Stress Engineer to join their Design team. The design department designs new and modified rocket motors and related systems. Analysis of rocket motor designs, including: Ballistic performance prediction and modelling, propellant charge and hardware stress analysis, and the provision of documentation service. ESSENTIAL DUTIES & REPONSIBILITIES - Stress Engineer Technical Responsibilities Analysis of new and existing rocket motor systems such as motor hardware and propellant charge structural and thermal analysis using FEA software. The use of various software and programming techniques, including: Abaqus, Altair-Hyperworks, Fortran and Matlab. Rheological analysis of material testing results and providing advice to the technical community for validation and verification of FEA models. Development of motor structural test plans and involvement in the delivery and assessment of the structural testing results. Responsible as the structural performance technical authority aspects of assigned projects, including supporting project customer meetings, project investigations, design reviews, and corresponding customer stress engineers. Deliver key project documentation including, structural analysis and structural test plans and reports and structural design records. EXPERIENCE & BACKGROUND - Stress Engineer Educated to degree level in an engineering discipline such as Mechanical, Aerospace or Structural or another related discipline such as Material Science. Material science knowledge Use of ABAQUS software in an professional or academic environment Experience with CAD modelling